Swan(sea) Song – personal research during my six years at Swansea ... and bey...
Vietnam training agenda
1. Vietnam Training Agenda
Introduction to DataLink Plus and DataVision
Installation of DataLink Plus
Installation of DataVision
Installation of Vietnam Bitmaps
DataLink Plus
• Configuration of Outstations and System
• Exercise 1
• Retrieval of Data from Vision meter
• Exercise 2
• Viewing of Data
• Exercise 3
• Exporting of Data
• Exercise 4
• Load Profile Viewer
• Exercise 5
DataVision
• Creation of Maps
• Exercise 1
• Charts and Chart Templates
• Exercise 2
• Reports and Report Templates
• Exercise 3
• Tariffs
• Exercise 4
• Automatic production of Charts & Reports – Queues
• Exercise 5
2. Installation of DataLink and DataVision
1. DataLink Plus
• Insert disk marked DataLink Plus into computer disk drive
• Select the ‘Start’ button followed by the Run option
• Type in the path A:Install, select the OK button
• Select the option Full Installation of Application, select the
OK button
• Enter the source disk drive as A:, select the OK button
• Enter the destination disk drive as C:, select the OK button
The DataLink Plus software will now be installed into the
C:ABBCS directory.
3. 2. DataVision
• Insert disk marked DataVison – Disk 1 into computer disk
drive
• Select the ‘Start’ button followed by the Run option
• Type in the path A:Setup, select the OK button
• The following box will then appear
• Enter Disk 2, select the OK button. The following box will
then appear
4. • Select the OK button. The following screen will then appear
• Select the button pointed to by the arrow i.e. installation
button
• The software will then installed into the C:ABBDVISION
directory
Note : - For the remaining disks follow the instructions on the
screen i.e. enter relevant disk, select the OK button.
5. 3. Installation of Bitmaps
• Insert disk marked Vietnam Bitmaps into computer disk
drive.
• Using Windows Explorer or Windows File Manager copy all
bitmaps from the floppy disk A: into the directory
C:ABBD_VISIONBITMAPS.
6. 3. Installation of Bitmaps
• Insert disk marked Vietnam Bitmaps into computer disk
drive.
• Using Windows Explorer or Windows File Manager copy all
bitmaps from the floppy disk A: into the directory
C:ABBD_VISIONBITMAPS.