Here is the simplest Project report format is Given.

1. A Project Report
On
< Title of the Project>
<your Name >
<Dept and Semester>
<Roll No.>
Electronics and Communication Engineering Department
Indus Institute of Technology and Engineering

2. Index
1.0 Theoretical background
2.0 Design Specifications
3.0 Paper Design
4.0 Simulation and results
5.0 Hardware Design
6.0 Test plan, procedure and results
7.0 Conclusions

3. 1.0 Theoretical background
<Provide the theoretical background about your project. How the project works in general.
Mention applications. Keep it max one page>
2.0 Design Specifications
<Provide the specifications which you expect to meet through your design. These may include
power supply, input output signal levels, frequencies, gain, loss, distortion levels, output input
impedances etc>
3.0 Paper Design
<Show the detailed calculations of your design. Show your assumptions.>
4.0 Simulation and results
<Simulate the designed circuit in multisim, pSpice or any other simulator. Include the diagrams
and results obtained at various points in the circuit>
5.0 Hardware Design
<Build the hardware on a breadboard. List the components used. Draw the final circuit diagram,
if different from simulated circuit>
6.0 Test plan, procedure and results
< Explain how you plan to verify that the design meets the specified values through
measurements. List the equipment required. Detail the procedure and show connection diagram
in the test setup. Provide the measured results in the form of plots, tables etc.>
7.0 Conclusions
<Explain why if your results are different from the expected. Suggest what may be changed to
improve the results>

4. General Instructions
 Use the cover sheet as shown in the format
 Prepare the report in Word
 Keep the text font size 11 in Arial, 12 in Times Roman
 Heading size: 12 Bold
 Prepare equations using Microsoft Equation (Insert -> Object -> Microsoft Equation 3.0)
 Use minimum bends of connecting wire in the circuit diagram
 Add captions to all figures, tables, pictures