1. Soyeb A. Patel
[QC Welding Inspector]
Personal Details
D.O.B: 22/02/1993 Address: 38 Gibraltar Street, Bolton,
Email: soyebpatel1993@yahoo.co.in BL3 5DY, United Kingdom.
Mobile: +44 7479090109
Personal Statement
To find a challenging position which can help me develop upon my skills and show outstanding
results. Also I would like to use my knowledge, skills, strengths and innovation to show development
in any company that I may receive a position within.
Key Skills
Technical Skills
• Strong experience in GTAW & SMAW.
• Knowledge in WPS, PQR, WQTR records.
• Knowledge in Fabrication Drawing and welding process, Engineering Drawing, NDT
Testing.
• ASNT level 2 Technician
• Welder Qualification on the basis of requirements of ASME SEC IX application code
sections.
• Welding inspection before welding, during & after welding.
• Weld visual & Inspection activities.
• Visual testing of welded joints according to applicable codes and standards.
• Verifying the welding consumables against ASME Section II part C and the approved
WPS.
• Evaluation of discontinuities for different type of metals and weld joints by RT, UT,
MT, PT, PWHT, HT, Testing (Hydro, Pneumatic), Weld repair etc…
• Reviewing of daily welding inspection reports and selecting joints for NDT per project
specification.
• Receiving inspection of the material against the packing list, purchase order, and
specification and prepare the inspection report, over short/Damage reports and Non
Conformance Report (NCR) for any deviation.
• Study the project drawings and verifying M.T.O (Material take off for the project) steel
structure material (Pipes, Plates, beams sections, angles), piping material (Flanges,
Elbows, valves, tees etc.)
• Coordinate and monitor all the test pack flow in between construction and QA/QC
departments.
• Handled the position as Lead area welding inspector and resolved all the welding related
issues immediately with the coordination of area inspectors.

2. Personal Skills
• My understanding and soft nature enables me to deal with all types of people, thereby
achieving desired results.
• I am a very enthusiastic and energetic person who is always willing to put out the best of
efforts and achieve the desired goals.
• My multi-lingual capabilities in English, Gujarati, Hindi, Urdu and basic Arabic allow me
to communicate effectively with co-workers in my sector.
• Having excellent planning and organization skills accompanied by basic and advance
computer skills I can easily adapt to all working circumstances and environments
• Co-operation is key for me to get the best out of my subordinates and co-workers in order
to get the desired results.
Education
2011 Diploma in Mechanical Engineering, Grade A
2008 Bright Day School, Vadodara.
S.S.C (10th
) passed from Gujarat secondary and higher secondary education board.
Certificates & Qualifications
( Non Destructive Testing) LEVEL – II
• Liquid Penetrate Testing (PT) 83.3%
• Magnetic Particle Testing (MT) 80%
• Radiography Testing (RT) 81%
• Ultrasonic testing(UT) 83%
CSWIP 3.1 Level II
• Certificate no. : 71273
• Expiry Date : 15th
Dec. 2017
Professional Employment
 Third Party Inspection (TPI) ` 9th
January 2015 – 10th
February 2015
As Welding Inspector/Material Inspector (TPI)
My job Responsibilities were:
• Inspection on receiving material and checking PO & inspection log
• Review on isometric drawings
• Inspection before, during and after welding
• Monitoring GTAW/SMAW weld process as per WPS.
• Supervising NDT process on new weld joints.
• Preparing daily welding production record (DWPR) reports.
• RT (RTFI) Films Interpretation.
• Final reporting to TPI Manger.

3.  Reliance Industries Limited(Surat) December 2013-December 2014
As Welding Inspector/QC/NDT Inspector
My job Responsibilities were:
• Working in a Naphtha cracking furnace.
• Supervising NDT process on new weld joints.
• Monitoring hydrotesting on a new coils.
• Monitoring GTAW weld process.
• Preparing weld report and weld inspection report.
• Film Interpretation.
• Final reporting to QC engineers.
 Essar Steel Ltd.(Surat) February 2013- November 2013
As a Welding Inspector
My job responsibilities were:
• Working as a Welding inspector
• Preparing inspection report and reporting the same to Q.C. Manager.
• Visual Inspection of welds and joints and making reports according to it.
• Welding inspection before welding, during & after welding.
• Monitoring heat treatment on raw material
• Reading of Weld drawings and work according to client.
• Checking weld reports and WPS on daily basis.
 UNITED ENGINEERS (Baroda) October 2011-December 2012
As a Q.C/Welding Inspector/TPI
My job responsibilities were:
• Working as ASNT NDT level II personnel.
• Working according to NDT methods i.e. magnetic particle inspection and penetration testing
and also preparing NDT reports.
• Making and reading of internal and external fabrication drawings.
• Testing weld area by MPI and UT methods and make reports on it.
• Interpretation of codes and standards according to the clients demand.
• Revising on WPS and company procedure on every new project.
• Performing Ultra Sonic testing on raw material according to company’s requirement.
• Taking coordinating decision with client inspector.
• Coordinating with production management to get requirement as per standards and codes.
• Preparation of final document in test pact for client approval.
• Preparing welding visual reports.

4.  SCOPE WELDING INSTITUTE (Baroda) March 2010-July 2011
As a Trainee Q.C
My job responsibilities were:
• Documentation work including maintaining various records.
• Learning how to monitor daily usage of welding consumable.
• Maintaining weld record process of all inspection in both hard and soft copy.
• Maintaining weld records of all the welders and fitters.
• Visual Inspection of joints and welds.
• Preparing inspection report and reporting the same to Q.C. Manager
• Providing technical support to all welding issues.
• Getting familiar with welding procedure, qualification, welder qualification, selection of
electrodes and visual inspection
• Handling welder job recruitment test for different company.
• Attending weekly safety meetings.
References:
Rajendra.V.Mehta
Company Owner
Mody Technical Consultancy (India. .Pvt.Limited)
Tel: 00918128687540
Email: mtcmint@sify.com
Hanif Malek
General Director
SCOPE Welding Institute
Tel: 00919925252508
Email: scopewelding@gmail.com
Neha Mehta
Teaching Supervisor
Bhartiya Shiksha Parishad Uttar Pradesh
Tel: 00919426336838
Email: neha_mehta66@yahoo.com
Prashant Parekh
Tel: 00919909007551
Email: prashantparekh23@gmail.com