지브라 iMZ320 모바일 프린터는 경량의 초소형 디자인으로 필요할 때 언제든 영수증과 청구서를 인쇄할 수 있어 업무 처리가 간소화하는 바코드프린터 입니다.
지브라 iMZ320 모바일 프린터는 스마트폰 또는 태블릿PC (애플 iOS, 안드로이드, Windows® Mobile 및 BlackBerry®) 플랫폼에 블루투스 연결을 지원합니다.
A Sidekick That Won't Weigh You Down
At ¾ of a pound (0.34 kg) or less, these lightweight printers can be worn a full shift without any burden or bother
Comfortably wear the printer via belt clip or shoulder strap for unobtrusive and convenient printing
Simple to Operate
Single push-button media access for simple reloading
Intuitive LEDs indicate on/off, error, and connectivity status
Economical Alternative
A simple, reliable and affordable printer alternative
Each iMZ printer comes standard with USB and Bluetooth connectivity, allowing you to communicate with mobile devices running on iOS, Windows® Mobile, Android and BlackBerry operating systems
Palm-Sized Printing Power
High-speed processor and extensive memory for printing complex barcodes, fonts and graphics
iMZ printers now come with an 802.11n option with dual-band support (2.4 GHz?802.11b/g/n and 5 GHz-802.11a/n) for those overcrowded wireless networks in retail environments where business operations need communication at the less-crowded 5 GHz band
Secure Bluetooth 2.0, 802.11a/b/g/n (optional) or USB (client) connectivity, Wi-Fi® and Cisco® CCX V4 ASD-certified
STANDARD FEATURES
Direct thermal printing of barcodes, text and graphics
203 dpi/8 dots per mm resolution
Print speed: Up to 4"/102 mm per second
CPCL and ZPL® programming languages
Resident fixed and scalable fonts
400MHz 32-bit ARM® processor with 128 MB RAM memory
128 MB Flash memory supports downloadable programs, receipt formats, fonts, and graphics
USB port
1.6Ahr Li-Ion battery
Built-in battery charger
Optical out-of-media sensing using fixed center-position sensor
Tear bar for easy receipt dispensing
Supports vertical and horizontal printing
Printer can be used in any orientation
Fixed media-roll width
Clamshell design for easy media loading
Printer Management: Mirror, SNMP, Web server (with customizable HTML pages), Wavelink Avalanche® [Future firmware update]
Four LEDs as user interface indicators
4'/1.2 m drop to concrete (multiple times)
Label odometer
Bluetooth 2.1
Security modes 1?4
Bluetooth printing from Apple devices (iOS5, iOS6)
IP42-rated for dust and water resistance (IP54 with durability-enhancing case)
Print Touch via NFC?One touch to pair and print via Bluetooth
PRINTER SPECIFICATIONS
Resolution : 203 dpi/8 dots per mm
Memory : 128 MB RAM; 128 MB Flash (standard)
Print width : 2.9"/73.7 mm
Print length : Maximum: Continuous
Print speed : Up to 4"/102 mm per second
Physical Characteristics
Width : 4.11"/104.4 mm
Height : 5.34"/135.6 mm
Depth : 2.26"/57.4 mm
Weight : 0.75 lbs/0.34 kg with battery with battery
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com/
This document provides an overview and reference for the Yahoo! Web Analytics API. It describes the supported entities that can be accessed via the API, such as accounts, projects, campaigns, and reports. It also outlines the main operations that can be performed, including initializing a session with the login call, retrieving and updating account information, scheduling and accessing reports, and reconciliation features. The document provides details on the SOAP and XML-RPC implementations and includes examples of API calls and responses.
NEC Commercial monitors are now available from Dukane.
I am an authorized Consultant for Dukane
Bill McIntosh
Phone : 843-442-8888
Email : WKMcIntosh@Comcast.net
This document outlines procedures for staff at the Quality Inn & Suites of Holland. It includes sections on opening and closing shifts, making reservations, checking guests in and out, handling payments, running night audit, housekeeping responsibilities, breakfast set-up and tear-down, emergency procedures, and more. However, many of the detailed steps are missing or incomplete as the document contains errors where content should be.
The document provides an overview of the features and functionality available in the Pi trading platform version 1.0.0.6. It describes the login process, market watch, order types, charting tools, technical indicators, account positions and balances that can be accessed. The document is a user manual that defines each section of the Pi menus and provides instructions on how to use the various trading and analysis tools within the platform.
This document is the Spring Web Flow 2 Reference Guide. It provides reference documentation for Spring Web Flow 2, including information on defining flows, essential language elements like view-states and transitions, using actions and input/output mapping, calling subflows, and using the Expression Language. It contains chapters on these topics, as well as details on supported EL implementations, special EL variables, and the scope searching algorithm. The guide is authored by Keith Donald, Erwin Vervaet, Jeremy Grelle, Scott Andrews, and Rossen Stoyanchev.
The document provides an overview of Apex development for the Winter '13 release of Salesforce:
- It introduces Apex and how it can be used to extend Salesforce with custom application logic. The basic development process is outlined including using sandboxes, writing code, testing, and deployment.
- Core Apex concepts like data types, variables, expressions, and control structures are explained. Invoking Apex via triggers, schedulers, and anonymous blocks is also covered at a high level.
- The document serves as a reference for Apex classes, interfaces, exceptions and standard methods that can be used in development. Debugging and testing techniques are also summarized.
Doctrine ORM for PHP is an object-relational mapper (ORM) for PHP applications. It provides transparent persistence for PHP objects and works with many databases including MySQL, PostgreSQL, and SQLite. The guide covers installing and configuring Doctrine, defining models and relationships, querying data with DQL, and additional features like validation, inheritance, behaviors and searching.
This document provides the table of contents for a training manual on Keycloak. The table of contents lists 17 chapters that cover topics like using Keycloak SPIs, debugging Keycloak, configuring logging, multifactor authentication, user federation, authentication flows, OpenID Connect, UMA, and examples of using offline tokens. It provides an overview of the content included in the training manual.
This document provides an overview and reference for the Yahoo! Web Analytics API. It describes the supported entities that can be accessed via the API, such as accounts, projects, campaigns, and reports. It also outlines the main operations that can be performed, including initializing a session with the login call, retrieving and updating account information, scheduling and accessing reports, and reconciliation features. The document provides details on the SOAP and XML-RPC implementations and includes examples of API calls and responses.
NEC Commercial monitors are now available from Dukane.
I am an authorized Consultant for Dukane
Bill McIntosh
Phone : 843-442-8888
Email : WKMcIntosh@Comcast.net
This document outlines procedures for staff at the Quality Inn & Suites of Holland. It includes sections on opening and closing shifts, making reservations, checking guests in and out, handling payments, running night audit, housekeeping responsibilities, breakfast set-up and tear-down, emergency procedures, and more. However, many of the detailed steps are missing or incomplete as the document contains errors where content should be.
The document provides an overview of the features and functionality available in the Pi trading platform version 1.0.0.6. It describes the login process, market watch, order types, charting tools, technical indicators, account positions and balances that can be accessed. The document is a user manual that defines each section of the Pi menus and provides instructions on how to use the various trading and analysis tools within the platform.
This document is the Spring Web Flow 2 Reference Guide. It provides reference documentation for Spring Web Flow 2, including information on defining flows, essential language elements like view-states and transitions, using actions and input/output mapping, calling subflows, and using the Expression Language. It contains chapters on these topics, as well as details on supported EL implementations, special EL variables, and the scope searching algorithm. The guide is authored by Keith Donald, Erwin Vervaet, Jeremy Grelle, Scott Andrews, and Rossen Stoyanchev.
The document provides an overview of Apex development for the Winter '13 release of Salesforce:
- It introduces Apex and how it can be used to extend Salesforce with custom application logic. The basic development process is outlined including using sandboxes, writing code, testing, and deployment.
- Core Apex concepts like data types, variables, expressions, and control structures are explained. Invoking Apex via triggers, schedulers, and anonymous blocks is also covered at a high level.
- The document serves as a reference for Apex classes, interfaces, exceptions and standard methods that can be used in development. Debugging and testing techniques are also summarized.
Doctrine ORM for PHP is an object-relational mapper (ORM) for PHP applications. It provides transparent persistence for PHP objects and works with many databases including MySQL, PostgreSQL, and SQLite. The guide covers installing and configuring Doctrine, defining models and relationships, querying data with DQL, and additional features like validation, inheritance, behaviors and searching.
This document provides the table of contents for a training manual on Keycloak. The table of contents lists 17 chapters that cover topics like using Keycloak SPIs, debugging Keycloak, configuring logging, multifactor authentication, user federation, authentication flows, OpenID Connect, UMA, and examples of using offline tokens. It provides an overview of the content included in the training manual.
This document provides an overview of Keycloak and discusses how to set up and use Keycloak for identity and access management. It covers Keycloak concepts, installation, configuration of realms and clients, integration with applications, and examples of OAuth 2.0, OpenID Connect, and SAML usage with Keycloak. Debugging and analyzing Keycloak implementations is also demonstrated.
DotNet & Sql Server Interview QuestionsNeeraj Kaushik
This document contains a table of contents listing 50 important topics for .NET interviews. The topics covered include what CLR does, common type system, common language specification, boxing and unboxing, variables, jump statements, nullable types, strings, indexers, iterators, secure strings, enumerated types, interfaces, app domains, threading, data assignment differences between value and reference types, cloning, assemblies, events vs delegates, object size, disposal patterns, data readers vs datasets, temporary tables, impersonation, and client-side form validation. The document provides a high-level overview of concepts that may be discussed during .NET interviews.
This document provides an overview of threading concepts in C#, including how to create and manage threads, pass data between threads, and ensure thread safety. It discusses thread pooling, synchronization primitives like locks, events and signaling, and advanced topics such as parallel programming and non-blocking synchronization. The goal is to explain how to make the most of threading to improve performance and responsiveness in C# applications.
Schmuzzi is a software company that I founded specializing in content management software that allows subscribers to have a resume website deployed to their own domain name. Every Schmuzzi subscriber gets their own database and becomes the administrator on their own Schmuzzi resume website.
The idea behind Schmuzzi is to move much of the information that would normally come out later in an interview to the front of the process. Prospective employers and clients can perform extensive research on the Schmuzzi subscriber based on the information presented within the Schmuzzi website. This allows the Schmuzzi subscriber to market themselves in a manner similar to how corporations market their products and services. Essentially allowing the Schmuzzi subscriber to become a brand.
Imagine dividing a resume website into its functionality and its content. When a Schmuzzi website is deployed all of the functionality is already there. All a Schmuzzi subscriber then needs to do is customize the features that they want and add their content. Almost everything in Schmuzzi is database driven, and therefore highly customizable. No technical abilities are required on the part of the Schmuzzi subscriber.
Schmuzzi is an extension to employment or networking websites, as opposed to an alternative. A Schmuzzi subscriber can link their Schmuzzi website to any employment, or networking websites to which they happen to belong. Each Schmuzzi subscriber gets their own Schmuzzi instance deployed to their own domain name. This is considerable different from merely having a profile on an employment or networking website. The Schmuzzi subscriber has far more freedom and control. The entire Schmuzzi website revolves around the Schmuzzi subscriber.
The ultimate vision of Schmuzzi is to create a technology infrastructure that would allow people to come together in cooperative collaborative enterprise.
This document provides an overview of the problem formulation and analysis for designing a composting toilet system for the CCAT house. It includes:
1) Defining the inputs, outputs, solution variables, and criteria for the system.
2) A literature review on relevant topics to composting toilet design like composting conditions, toilet designs, and local regulations.
3) An analysis of the project location, client stipulations, expected waste volumes, and design constraints.
This document is a user manual for the TX16Wx software sampler. It describes the sampler's sound architecture including banks, performances, programs, groups, splits and waves. It provides details on the user interface and how to use the various views and editors for selecting sounds, editing programs and samples, and configuring overall settings. Key features covered include the performance view for managing multitimbral setups, the program editor for mapping samples, and the wave editor for sample playback and editing.
This document provides instructions for creating software modules that can be installed and used within the Plesk control panel. It discusses the logical and physical structure of modules, how they interact with Plesk, designing the graphical user interface, localization, and creating installation packages for different operating systems. Patented hosting technology is protected by U.S. patents and trademarks include Plesk, ASPLinux, RedHat, Solaris and others.
This document provides a user manual for the EXTREM expense management software. It outlines the installation process and provides instructions for key configuration tasks like setting up companies, employees, departments, and users. The bulk of the document describes the various configuration screens in the software for entities like clients, projects, currencies, and expense categories. It also covers modules for expense reports, travel requests, reimbursements, and analytical reporting tools.
This document provides requirements for a point of sale (POS) system and management information system (MIS) for Sasto Mart, a department store. The POS system will handle sales transactions at multiple counters using RFID cards and barcode scanning. It will integrate with an MIS web module to generate daily and monthly sales reports. Key features include membership accounts, product configuration, sales receipt generation, and reporting. The system has both technical and non-technical requirements covering interfaces, hardware, security, performance, and software quality. It will run on a web server using PHP and MySQL and interface with devices like barcode scanners and printers.
Auditoría de TrueCrypt: Informe final fase IIChema Alonso
Informe con los resultados de la fase II del proceso de auditoría del software de cifrado de TrueCrypt que buscaba bugs y posibles puertas traseras en el código.
The document provides an overview of the e4auditor tool, which is used to audit electronic medical records. It describes the various dashboard sections that provide statistics and reports on issues found, including orphaned records and folders, unassigned deficiencies, delinquencies and more. It also includes a section detailing the customer information needed to configure the tool to connect to the relevant electronic medical record database.
This document provides reference information about SCSI commands for parallel SCSI, Fibre Channel (FC), and Serial Attached SCSI (SAS) interfaces. It defines common terms, fields, and data structures used in SCSI commands, including the Command Descriptor Block (CDB) format. The document also contains detailed reference information and parameters for specific SCSI commands like INQUIRY, FORMAT UNIT, LOG SENSE, and MODE SENSE.
This document discusses the Greasemonkey scripting tool. It covers getting started with Greasemonkey, creating a basic "Hello World" script, debugging scripts, common scripting patterns, case studies of existing scripts, and advanced topics. The chapters discuss installing and managing Greasemonkey and scripts, adding metadata to scripts, coding and editing scripts, debugging with the JavaScript console, DOM inspector, and other tools, executing scripts on domains and subdomains, testing for elements and attributes, inserting/removing content, styling elements, and more.
The document is an operator manual for the Interactive Channel Platform (ICP) interactive television system. It provides instructions for ICP operators to manage the system and support user experiences. The manual contains tutorials on the basics of interactive TV and using the ICP. It also includes reference sections on monitoring, configuring, updating, starting/stopping the system, and troubleshooting. Appendices provide additional technical details.
These are the first 4 chapters of my book Refresh the Road Ahead (www.refreshroadahead.com). A book on how to work successfully with Microsoft. The full book is 12 chapters and 260 pages and you can buy it from the website www.refreshroadahead.com or on Amazon
This document provides a summary of the Spring Framework reference documentation for version 2.5.6. It includes an overview of the framework, descriptions of key components like the IoC container and AOP support, and details on using Spring for enterprise applications with features such as transactions, JDBC, and testing.
This document provides a tutorial on Cortana, a scripting language for automating Metasploit and extending the user interfaces of Armitage and Cobalt Strike. It introduces Cortana's features and capabilities for controlling Metasploit, performing post-exploitation tasks, building user interfaces, and enabling agent cooperation. Examples are provided throughout to demonstrate how to integrate with Metasploit, interact with compromised systems, and develop user interfaces for red team automation. Resources for the Cortana community are also listed to help users with scripting questions.
Artromick Ac Hostguide304 for Hospital Computing SolutionsArtromick
This document provides an overview manual for the Avalo AC Medication Cart. It describes the cart's features and components, user types and responsibilities, and pre-configured settings. It also provides instructions for using, accessing, securing and programming the cart using either a host software program or directly from the cart's keypad. The manual is divided into chapters covering the cart's overview, operation, host software programming, and on-cart programming.
This document provides a summary of the Hibernate reference documentation:
- It introduces Hibernate and covers basic concepts like mapping classes, associations, collections, inheritance, querying and transactions.
- The document includes tutorials for creating a simple Hibernate application, mapping associations between classes, and building a web application that uses Hibernate.
- It describes Hibernate's architecture and configuration options for integrating Hibernate with J2EE application servers and setting properties like SQL dialects.
- The reference covers advanced topics like batch processing, the Hibernate Query Language (HQL), and criteria queries for building queries programmatically.
Auto dialer Newfies-dialer documentation for latest version 3.9.2.
Newfies-Dialer is an Voice broadcasting solution built to support cloud based servers and can also work on standalone servers.
This document provides an overview and instructions for installing and using EndNote X2 reference management software. It introduces the key components and features of EndNote libraries, preferences, entering references both manually and via online import, searching libraries and online databases, generating bibliographies in Word documents, and finding additional help resources. The table of contents outlines 7 parts to the guided tour covering the main EndNote tasks in order from setting up the software to citing references in Word.
Configuring Microsoft Windows IP Security to Operate with HP ...webhostingguy
This document provides instructions for configuring Microsoft Windows IP Security (IPsec) to operate with HP-UX IPSec in both host-to-host and end-to-end tunnel topologies. It describes how to create Windows IPsec policies with rules for address filtering and security associations. It also compares IPsec configuration parameters between Windows and HP-UX and provides troubleshooting tips.
This document provides an overview of Keycloak and discusses how to set up and use Keycloak for identity and access management. It covers Keycloak concepts, installation, configuration of realms and clients, integration with applications, and examples of OAuth 2.0, OpenID Connect, and SAML usage with Keycloak. Debugging and analyzing Keycloak implementations is also demonstrated.
DotNet & Sql Server Interview QuestionsNeeraj Kaushik
This document contains a table of contents listing 50 important topics for .NET interviews. The topics covered include what CLR does, common type system, common language specification, boxing and unboxing, variables, jump statements, nullable types, strings, indexers, iterators, secure strings, enumerated types, interfaces, app domains, threading, data assignment differences between value and reference types, cloning, assemblies, events vs delegates, object size, disposal patterns, data readers vs datasets, temporary tables, impersonation, and client-side form validation. The document provides a high-level overview of concepts that may be discussed during .NET interviews.
This document provides an overview of threading concepts in C#, including how to create and manage threads, pass data between threads, and ensure thread safety. It discusses thread pooling, synchronization primitives like locks, events and signaling, and advanced topics such as parallel programming and non-blocking synchronization. The goal is to explain how to make the most of threading to improve performance and responsiveness in C# applications.
Schmuzzi is a software company that I founded specializing in content management software that allows subscribers to have a resume website deployed to their own domain name. Every Schmuzzi subscriber gets their own database and becomes the administrator on their own Schmuzzi resume website.
The idea behind Schmuzzi is to move much of the information that would normally come out later in an interview to the front of the process. Prospective employers and clients can perform extensive research on the Schmuzzi subscriber based on the information presented within the Schmuzzi website. This allows the Schmuzzi subscriber to market themselves in a manner similar to how corporations market their products and services. Essentially allowing the Schmuzzi subscriber to become a brand.
Imagine dividing a resume website into its functionality and its content. When a Schmuzzi website is deployed all of the functionality is already there. All a Schmuzzi subscriber then needs to do is customize the features that they want and add their content. Almost everything in Schmuzzi is database driven, and therefore highly customizable. No technical abilities are required on the part of the Schmuzzi subscriber.
Schmuzzi is an extension to employment or networking websites, as opposed to an alternative. A Schmuzzi subscriber can link their Schmuzzi website to any employment, or networking websites to which they happen to belong. Each Schmuzzi subscriber gets their own Schmuzzi instance deployed to their own domain name. This is considerable different from merely having a profile on an employment or networking website. The Schmuzzi subscriber has far more freedom and control. The entire Schmuzzi website revolves around the Schmuzzi subscriber.
The ultimate vision of Schmuzzi is to create a technology infrastructure that would allow people to come together in cooperative collaborative enterprise.
This document provides an overview of the problem formulation and analysis for designing a composting toilet system for the CCAT house. It includes:
1) Defining the inputs, outputs, solution variables, and criteria for the system.
2) A literature review on relevant topics to composting toilet design like composting conditions, toilet designs, and local regulations.
3) An analysis of the project location, client stipulations, expected waste volumes, and design constraints.
This document is a user manual for the TX16Wx software sampler. It describes the sampler's sound architecture including banks, performances, programs, groups, splits and waves. It provides details on the user interface and how to use the various views and editors for selecting sounds, editing programs and samples, and configuring overall settings. Key features covered include the performance view for managing multitimbral setups, the program editor for mapping samples, and the wave editor for sample playback and editing.
This document provides instructions for creating software modules that can be installed and used within the Plesk control panel. It discusses the logical and physical structure of modules, how they interact with Plesk, designing the graphical user interface, localization, and creating installation packages for different operating systems. Patented hosting technology is protected by U.S. patents and trademarks include Plesk, ASPLinux, RedHat, Solaris and others.
This document provides a user manual for the EXTREM expense management software. It outlines the installation process and provides instructions for key configuration tasks like setting up companies, employees, departments, and users. The bulk of the document describes the various configuration screens in the software for entities like clients, projects, currencies, and expense categories. It also covers modules for expense reports, travel requests, reimbursements, and analytical reporting tools.
This document provides requirements for a point of sale (POS) system and management information system (MIS) for Sasto Mart, a department store. The POS system will handle sales transactions at multiple counters using RFID cards and barcode scanning. It will integrate with an MIS web module to generate daily and monthly sales reports. Key features include membership accounts, product configuration, sales receipt generation, and reporting. The system has both technical and non-technical requirements covering interfaces, hardware, security, performance, and software quality. It will run on a web server using PHP and MySQL and interface with devices like barcode scanners and printers.
Auditoría de TrueCrypt: Informe final fase IIChema Alonso
Informe con los resultados de la fase II del proceso de auditoría del software de cifrado de TrueCrypt que buscaba bugs y posibles puertas traseras en el código.
The document provides an overview of the e4auditor tool, which is used to audit electronic medical records. It describes the various dashboard sections that provide statistics and reports on issues found, including orphaned records and folders, unassigned deficiencies, delinquencies and more. It also includes a section detailing the customer information needed to configure the tool to connect to the relevant electronic medical record database.
This document provides reference information about SCSI commands for parallel SCSI, Fibre Channel (FC), and Serial Attached SCSI (SAS) interfaces. It defines common terms, fields, and data structures used in SCSI commands, including the Command Descriptor Block (CDB) format. The document also contains detailed reference information and parameters for specific SCSI commands like INQUIRY, FORMAT UNIT, LOG SENSE, and MODE SENSE.
This document discusses the Greasemonkey scripting tool. It covers getting started with Greasemonkey, creating a basic "Hello World" script, debugging scripts, common scripting patterns, case studies of existing scripts, and advanced topics. The chapters discuss installing and managing Greasemonkey and scripts, adding metadata to scripts, coding and editing scripts, debugging with the JavaScript console, DOM inspector, and other tools, executing scripts on domains and subdomains, testing for elements and attributes, inserting/removing content, styling elements, and more.
The document is an operator manual for the Interactive Channel Platform (ICP) interactive television system. It provides instructions for ICP operators to manage the system and support user experiences. The manual contains tutorials on the basics of interactive TV and using the ICP. It also includes reference sections on monitoring, configuring, updating, starting/stopping the system, and troubleshooting. Appendices provide additional technical details.
These are the first 4 chapters of my book Refresh the Road Ahead (www.refreshroadahead.com). A book on how to work successfully with Microsoft. The full book is 12 chapters and 260 pages and you can buy it from the website www.refreshroadahead.com or on Amazon
This document provides a summary of the Spring Framework reference documentation for version 2.5.6. It includes an overview of the framework, descriptions of key components like the IoC container and AOP support, and details on using Spring for enterprise applications with features such as transactions, JDBC, and testing.
This document provides a tutorial on Cortana, a scripting language for automating Metasploit and extending the user interfaces of Armitage and Cobalt Strike. It introduces Cortana's features and capabilities for controlling Metasploit, performing post-exploitation tasks, building user interfaces, and enabling agent cooperation. Examples are provided throughout to demonstrate how to integrate with Metasploit, interact with compromised systems, and develop user interfaces for red team automation. Resources for the Cortana community are also listed to help users with scripting questions.
Artromick Ac Hostguide304 for Hospital Computing SolutionsArtromick
This document provides an overview manual for the Avalo AC Medication Cart. It describes the cart's features and components, user types and responsibilities, and pre-configured settings. It also provides instructions for using, accessing, securing and programming the cart using either a host software program or directly from the cart's keypad. The manual is divided into chapters covering the cart's overview, operation, host software programming, and on-cart programming.
This document provides a summary of the Hibernate reference documentation:
- It introduces Hibernate and covers basic concepts like mapping classes, associations, collections, inheritance, querying and transactions.
- The document includes tutorials for creating a simple Hibernate application, mapping associations between classes, and building a web application that uses Hibernate.
- It describes Hibernate's architecture and configuration options for integrating Hibernate with J2EE application servers and setting properties like SQL dialects.
- The reference covers advanced topics like batch processing, the Hibernate Query Language (HQL), and criteria queries for building queries programmatically.
Auto dialer Newfies-dialer documentation for latest version 3.9.2.
Newfies-Dialer is an Voice broadcasting solution built to support cloud based servers and can also work on standalone servers.
This document provides an overview and instructions for installing and using EndNote X2 reference management software. It introduces the key components and features of EndNote libraries, preferences, entering references both manually and via online import, searching libraries and online databases, generating bibliographies in Word documents, and finding additional help resources. The table of contents outlines 7 parts to the guided tour covering the main EndNote tasks in order from setting up the software to citing references in Word.
Configuring Microsoft Windows IP Security to Operate with HP ...webhostingguy
This document provides instructions for configuring Microsoft Windows IP Security (IPsec) to operate with HP-UX IPSec in both host-to-host and end-to-end tunnel topologies. It describes how to create Windows IPsec policies with rules for address filtering and security associations. It also compares IPsec configuration parameters between Windows and HP-UX and provides troubleshooting tips.
This document provides an overview of EndNote version 9 for Windows. It includes information about installing and upgrading EndNote, introduces the main EndNote library and interface, and provides a guided tour of common EndNote tasks like entering references, searching online databases, importing references, and using EndNote while writing a paper in Microsoft Word. The document is divided into chapters that cover the key aspects of using EndNote.
Pkcs#1 V2.1 (Cryptography Standard) Included #2,#4gueste9eb7fb
This document provides recommendations for implementing public-key cryptography using the RSA algorithm. It defines RSA key types, data conversion primitives, cryptographic primitives for encryption/decryption and digital signatures, encryption and signature schemes, and an ASN.1 syntax for representing keys and identifying schemes. The recommendations are intended for general application in computer and communication systems and are compatible with relevant standards. This document supersedes PKCS #1 version 2.0.
Plesk 8.0 Administrator's Guide provides information to help administrators configure and maintain their Plesk control panel. It covers topics such as logging in, customizing the interface, upgrading licenses, securing the panel, configuring server services like DNS, mail, databases and statistics, managing server resources, and serving customers by simplifying account and domain setup. The guide contains information needed to optimize use of the Plesk control panel.
Plesk is a hosting automation solution that simplifies setup and management of user accounts, websites, and email accounts. It manages common software components like DNS, web, FTP, and mail servers. The new release of Plesk features a brand new desktop interface with quick access to major functions and statistics, as well as the ability to customize permissions for different types of user accounts.
TortoiseSVN is a Windows client for Subversion version control. It provides features for importing and exporting files to a repository, checking out working copies, committing changes, updating working copies, and viewing project history. The document discusses TortoiseSVN's installation, basic version control concepts, repository creation and management, daily use features like committing and updating, and resolving conflicts. It is intended as a user guide for getting started with and using TortoiseSVN for source control management.
Instructor.demo c84a92d0 c1dc-42eb-ab82-0f4888823ae9suku dim
This document provides guidelines for the user interface of SAP Business One 2007. It describes the overall structure of the main window and main menu. It then details the various GUI controls available, including basic data and selection controls like text fields, checkboxes, and pickers, as well as more complex controls like tables, trees, and advanced selectors. It concludes with graphic design guidelines covering screen resolution, fonts, colors, window layout, terminology, and labeling conventions. The guidelines are intended to help maintain a consistent and user-friendly interface across the SAP Business One application.
This document is Steven Edward Atkin's dissertation submitted to Florida Institute of Technology in partial fulfillment of the requirements for a Doctor of Philosophy in Computer Science. The dissertation proposes a new multi-layered architecture called Metacode for multilingual information processing. It analyzes existing character encoding schemes and algorithms like bidirectional reordering and character normalization, and argues they lack a coherent architectural framework. The dissertation then introduces abstractions and mechanisms to organize these elements into the Metacode architecture.
The Tellurium Automated Testing Framework (Tellurium) is a UI module-based automated testing framework for web applications and it is robust, expressive, flexible, and reusable. This is Tellurium 0.6.0 User Guide.
The Diamond User Guide is now an online document found at http://help.3l.com/Sundance/. This page provides an older version of the user guide. It includes tutorials on installing Sundance, getting started with parallel programming on Diamond, compiling sequential programs, linking, configuring, and running programs. It also provides details on Sundance editions, processors, ports, channels, tasks, and performance.
This document provides an overview of the Exim mail transfer agent (MTA). It describes how Exim receives and delivers mail, the building and installation process, configuration options, and transports. Key components include routers for processing addresses, transports for delivery, and the use of regular expressions, lookups, and lists.
This document provides an overview and introduction to IPv6 fundamentals, including:
- The history and basics of IPv6 including addressing, headers, and essential functions like neighbor discovery.
- Methods for IPv6 integration and transition such as tunneling (6to4, ISATAP) and translation (NAT-PT).
- IPv6 routing protocols (RIPng, OSPF, BGP) and network management standards and tools.
- Other topics covered include multicast, security, mobility, and coexistence of IPv4 and IPv6. Configuration examples are provided for common IPv6 implementations.
The document is intended as a guide for network engineers and administrators to understand IPv6 technologies
This document provides guidance for administrators on using Cryoserver version 8. It covers essential topics of email archiving such as getting data into the system and searching emails. It also walks through the administration facilities and options. Cryoserver allows searching and reviewing archived emails. Basic users can only search their own emails while privileged users can search across repositories unless restricted. Data guardians receive transcripts of administrative searches. The document is intended to help administrators setup and manage Cryoserver.
Comparing Game Development on the Android and Windows Phone 7 Platforms.Ruairí O'Brien
A document I did in College for my final year project detailing my experience developing the same game for both the Android and Windows Phone 7 mobile platforms.
This document provides guidance on deploying Encrypted Traffic Analytics (ETA) to analyze encrypted traffic flows across various Cisco devices. It defines the necessary deployment components, including NetFlow, Cisco Stealthwatch, and Cisco Cognitive Intelligence. It also outlines the requirements, design, deployment process, and operation of ETA on supported Cisco switches like the Catalyst 9300/9400 series and routers like the 1000/4000/ASR 1000 series. The deployment process includes configuring the devices to enable ETA and export NetFlow data, as well as integrating Cognitive Intelligence with Stealthwatch to perform encrypted traffic analysis.
Plesk is a hosting automation solution that simplifies hosting provider management by allowing customers to manage their own accounts through a personal control panel. It integrates common hosting services like DNS, web, FTP, and email which are preconfigured with optimal default settings. New in version 8.1 is support for AWStats and MySQL 5.0. Plesk saves hosting providers time by automating customer account setup and isolation while empowering customers with self-service access.
Similar to 지브라프린터 Zebra iMZ320 감열 3인치 모바일프린터 매뉴얼 (20)
Zebra의 혁신적인 ZXP 시리즈 8 재전사 (Retransfer) 카드프린터 계열과 Windows 인증 드라이버 및 ZMotif SDK 소프트웨어를 사용하여 필요할 때 완벽한 화질로 선명한 컬러 카드와 단색 카드를 즉석에서 발급하십시오. 이 재전사 카드프린터는 스마트 카드와 같이 표면에 요철부가 있는 카드 인쇄, 높은 이미지 품질이 요구되는 분야 또는 내구성 및 마모 내성이 개선된 카드 인쇄에 적합합니다.
혁신적인 재전사 (Retransfer) 인쇄 공정을 사용하는 지브라 ZXP 시리즈 8 은 일반 신분증 사진보다 광택이 많은 잡지 인쇄물처럼 보이는 영상과 그래픽으로 고품질 포토 ID 카드를 제작하는 데 필요한 최상의 인쇄 해상도를 동급 최고 속도로 제공합니다. 프린터에 모듈형 설계를 채택하고 있어 필요에 따라 다양한 인코딩 옵션을 유연하게 추가할 수 있습니다. 단면 또는 양면 코팅도 지원합니다.
탁월한 성능
ZXP 시리즈 8은 가로 모드로 이미지를 인쇄하는 특허 받은 양면 동시 전사 공정을 채택하여 동종 최고의 인쇄, 인코딩 및 코팅 성능을 제공함으로써 품질 저하 없이 처리량과 편평도를 향상시킵니다. Zebra의 이미지 처리 기술을 기반으로 브랜드 사양과 품질을 충족하는 사진 품질 컬러와 해상도를 얻을 수 있습니다. 이 시리즈는 내부와 외부를 모두 견고하게 설계하여 수리 비용이 절감되고 가동 중단 시간이 단축됩니다.
간편한 프린터 통합 및 관리
ZMotif XML 기반 드라이버와 SDK를 채택하여 간편한 설치 및 빠른 배포에 적합한 드라이버와 관리 유틸리티 도구를 갖춘 엔터프라이즈급 카드프린터 입니다. Microsoft® Windows® 인증 드라이버가 기존 소프트웨어 인프라에서 적용 호환성, 사용 용이성 및 투자 보호를 보장합니다. USB 및 이더넷 연결 인터페이스가 표준으로 제공되며, 지역 네트워크 또는 무선 시스템에 쉽게 통합되는 WiFi 옵션도 제공합니다.
보안 기능
ZXP 시리즈 8 에는 단면 또는 양면 코팅용 라미네이터 모듈 옵션 등 보안 강화에 유용한 많은 기능을 포함하고 있습니다. 전사 필름이 내장된 사기 방지 수단 조작 증거를 보여주며, 잠금형 케이스와 카드 공급기 옵션이 무단 사용을 방지할 수 있습니다. 이 시리즈에는 Kensington® 잠금장치 슬롯도 포함됩니다.
PRINTING
Dye sublimation retransfer
Full color or monochrome retransfer printing
Single- and dual-sided printing
Max print speed single-side 190 cph*
Max print speed dual-sided 180 cph*
Photo quality image
Over-the-edge printing on standard CR80 media
* Print speed based on click to drop, average print coverage, with USB connectivity, card per hour (cph).
STANDARD FEATURES
USB and Ethernet connectivity
Single-card feed capability
150 card capacity feeder (30 mil)
15 card reject hopper (30 mil)
100 card output hopper (30 mil)
i Series™ intelligent media technology
Auto-calibration of media
21-character, 6 line LCD operator display
304 dpi (12.0 dots/mm) print resolution
64 MB memory standard
Lifetime warranty on printhead
2-year limited warranty on printer
Microsoft® Windows® certified drivers
Kensington physical lock capable
LAMINATOR SPECIFICATIONS
Single-or dual-sided lamination option (with dual-sided printer only)
180 cards per hour dual-sided printing and dual-sided lamination
GSA FIPS 201 approved (dual-sided lamination)
Uses Zebra True Secure i Series laminates only
Laminate for the top and bottom sold separately
Custom-coded laminates available
CARD SPECIFICATIONS
Card thickness: 30 ? 40 mil
Card size: ISO 7810 format, Type ID-1, CR-80 size
Card material: PVC and composite, ABS cards, PET, PET-G, and Teslin® composite***
Specialty cards: transparent (IR-blocked) or translucent card 30 mil (clear and colored)***
Technology cards: contact and contactless smart cards, UHF cards***
COMMUNICATIONS INTERFACES
USB V2.0
10/100 Ethernet (encoding over Ethernet requires ZBR PS-300 Ethernet-to-USB Device Server)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라프린터 Zebra ZXP 시리즈 7 열전사 단면인쇄 양면인쇄(옵션) 카드프린터 매뉴얼HION IT
지브라 ZXP7 시리즈 열전사 카드프린터로 대량발급 어플리케이션에서 사진과 유사한 품질의 카드를 인쇄합니다.
Zebra ZXP7 시리즈 카드프린터는 최신의 기술에 의해 대량으로 고품질의 카드를 빠르게 인쇄하며, 총 소유비용(TCO)을 낮춤으로써 사용자에게 뛰어난 가치를 제공합니다.
또한 정밀한 컬러 제어로 항상 선명한 카드를 인쇄합니다.
ZXP 시리즈 7 카드프린터는 혁신적인 디자인을 도입하였습니다.
지브라 ZXP 시리즈 7 카드프린터는 카드의 두께에 따라 자동으로 조정되고 간편하게 리본을 로딩할 수 있습니다.
색상으로 구분된 안내와 선명한 LCD 제어판으로 누구나 쉽게 사용할 수 있으며, 다양한 인코딩 및 연결 옵션 중에서 선택하면 됩니다.
그리고 특별한 보안 또는 내구성이 필요한 카드의 경우에는 폐기물 없는 단면/양면 라미네이트를 사용할 수 있습니다.
잠금 메카니즘은 프린터와 미디어를 보호하며 필요에 따라 소프트웨어로 작업을 추적하고 제한함으로써 보안을 더욱 강화할 수 있습니다.
성능 : 카드마다 필요한 방식으로 작동
ZXP 7 시리즈 카드프린터는 오늘날의 까다로운 비즈니스 니즈를 충족시킬 수 있도록 제작되었습니다.
광범위한 환경과 어플리케이션에서 바로 사용할 수 있는 강력한 디자인
사진 인쇄 기술을 적용하여 사진과 유사한 인쇄 품질 및 색의 농도 생성
풀전사(edge-to-edge)카드 인쇄
라미네이터로 카드의 보안 보장 및 이미지 수명 연장
생산성 : 빠른 속도와 간편한 유지보수
ZXP 7 시리즈 카드프린터는 빠른 인쇄 속도로 생산성을 향상시키고 대기 시간을 줄입니다:
빠른 click-to-drop 및 배치 인쇄 속도
최대 세가지 작업(인코딩, 인쇄, 라미네이팅)의 동시 처리로 가장 빠른 처리량 제공
보다 빠른 인쇄를 위해 개발된 ix Series™ 리본
양면 동시 라미네이팅
용이한 통합 및 간편한 유지보수가 가능합니다:
높은 미디어 용량
리본과 라미네이트 롤 사이즈 동일
리본 로딩 및 운영 간소화
Windows® 드라이버, ZMotif™SDK, 빠른 설치를 위한 네트워킹 옵션
적용성 : 현재 및 미래의 비즈니스 니즈 충족
ZXP 7 시리즈 카드프린터는 진정한 유연성을 제공합니다.
필요시 옵션을 구매하여 카드 인쇄 어플리케이션 포트폴리오 확장 및 투자 관리를 동시에 할 수 있습니다.
옵션 :
단면 또는 양면 인쇄
다양한 인코딩 및 연결 옵션
폐기물 없는 단면 또는 양면 라미네이트
물리적 보안 잠금 메커니즘
적용성 및 소프트웨어를 통한 제어:
ZXP Toolbox를 통해 프린터, 드라이버, 소프트웨어 설정에서부터 관리, 진단까지 고급 제어 기능 제공
고급 보안 기능으로 사용자별 기능 및 권한 설정에 필요한 관리 유연성 제공
소프트웨어 개발자는 ZMotif SDK를 사용하여 고급 기능의 간편한 통합 또는 맞춤형 인쇄 어플리케이션 개발 가능
비용 효율성 : 카드 당 비용을 최소화하도록 설계된 소모품
ZXP 7 시리즈 카드프린터는 Zebra True Colours® ix Series 리본과 Zebra True Secure™ i Series™ 라미네이트를 함께 사용하도록 설계되었습니다.
대용량 리본은 롤 당 더 많은 이미지를 제공함으로써 비용을 줄이고, 보다 빠른 속도로 고품질의 이미지를 인쇄할 수 있는 개선된 포뮬레이션을 자랑합니다.
대부분의 리본 타입은 모든 인쇄 업무의 니즈를 충족시키기 위해 두 가지 사이즈로 제공합니다.
Zebra True Secure 라미네이트는 카드 위조 위험을 줄이고 강력한 보안 카드의 수명을 연장시켜 줍니다.
독창적인 라미네이트 디자인은 라미네이트의 Carrier, Backing, Liner 를 제거함으로써 폐기물을 급격히 줄여 줍니다.
또한 특수 설계된 카트리지로 라미네이트를 간단하게 교체할 수 있습니다.
리본과 라미네이트 모두 지능형 미디어 기술을 활용하여 프린터를 자동으로 감지하고 보정합니다.
STANDARD FEATURES
300 dpi/11.8 dots per mm print resolution
USB 2.0 and Ethernet 10/100 connectivity
Microsoft® Windows Certified drivers
200-card capacity feeder (30 mil)
15-card reject hopper (30 mil)
100-card output hopper (30 mil)
Single-card feed capability
ix Series intelligent media technology
21-character x 6-line LCD operator display with configurable soft keys - Kensington® physical lock slot
Two-year unlimited warranty on printer and printhead
OPTIONAL FEATURES
Single-sided laminator
FIPS 201 compliant dual-sided laminator
Lockable enclosures and card feeder**
EXtended product warranty programs
802.11b/g wireless connectivity
1D barcode scanner
Duo-Print upgrade kit
NOTE: FIPS201 compliant dual-sided laminator is only for North America.
COMMUNICATIONS INTERFACES
USB 2.0
USB supports plug-and-play printer identification
10/100 Ethernet
802.11b/g wireless option
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
초고속으로 사진처럼 생생한 이미지 품질 구현
보안성이 뛰어난 애플리케이션 요구를 충족하도록 설계된 ZXP 시리즈 9™을 사용하면 사진 품질의 카드를 빠르고 안정적으로 생성 할 수 있습니다. 안정성을 자랑하는 ZXP 시리즈 9 카드프린터는 사진과 그래픽 인쇄에 적합하며 지브라의 Color Predictive Technology (색상 예측 기술)를 채택하고 있습니다. 이 기술은 지속적인 모니터링과 프린터 설정 즉시 적용을 통해 최고 수준의 품질을 자동으로 생성합니다. 본 재전사 프린터 제품은 스마트 카드와 같이 표면이 고르지 않은 경우에도 내구성이 뛰어난 풀전사 카드 제작이 가능합니다.
탁월한 인쇄 품질과 성능
ZXP 시리즈 9 재전사 카드프린터는 탁월한 품질과 안정성, 빠른 처리 속도, 더 많은 옵션과 귀중한 비용 및 시간 절감 효과를 제공합니다.
고품질 카드를 빠른 속도로 인쇄하며, 동급 최강의 재전사 및 라미네이트 기술로 강화된 보안을 보장합니다.
유연하고 간편한 작업
ZXP 시리즈 9 카드프린터를 통합 및 관리하는 데 필요한 도구를 제공하는 종합적인 소프트웨어 제품군을 사용하여 맞춤형 카드 디자인을 생성할 수 있습니다. 사용자 선택 가능 인쇄 품질 모드는 더 많은 옵션과 제어 기능을 제공합니다. 특허받은 Zebra의 양면 동시 재전사 인쇄 설계로 인쇄 도중 프린터가 카드를 기계적으로 뒤집을 필요가 없습니다. 이 기술 덕분에 기계적 오류나 카드 걸림 현상이 감소합니다. 그리고 Print Touch™ 및 QR 코드 기술이 즉석에서 관련 정보와 지원을 제공합니다.
보안 기능 추가
특수 홀로그램 라미네이트와 함께 암호화, 프린터 호스트 인증 등의 프린터 기반 보안 기능으로 보안을 한층 더 강화하고 불법 위조, 변조 및 복제를 방지할 수 있습니다. 지브라는 카드 위조 방지를 위해 전용 카드 보안 기능이 필요한 맞춤형 홀로그램 라미네이트를 지원합니다. ZXP 시리즈 9는 무단 사용을 방지하기 위한 카드 피더 및 인클로저와 함께 선택적으로 잠금 기능도 라미네이터에 탑재할 수 있습니다.
PRINTING
Dye diffusion retransfer
Full color or monochrome retransfer printing
Single- and dual-sided printing
Max print speed single-side 190 cph*
Max print speed dual-sided 180 cph*
User-selectable print modes: standard and fine
Photo-quality images
Over-the-edge printing on standard CR80 media
STANDARD FEATURES
USB and Ethernet connectivity
Single-card feed capability
150 card capacity feeder (30 mil)
15 card capacity reject hopper (30 mil)
100 card capacity output hopper (30 mil)
i Series™ intelligent media technology
Auto-calibration of media
21-character, 6 line LCD operator display
304 dpi (12.0 dots/mm) print resolution
64 MB memory standard
Lifetime warranty on printhead
2-year limited warranty on printer
Microsoft® Windows certified drivers
Kensington physical lock capable
CARD SPECIFICATIONS
Card thickness: 30 - 40 mil
Card size: ISO 7810 format, Type ID-1, CR-80 size
Card material: PVC and composite, ABS cards, PET, PET-G, and Teslin® composite**
Specialty cards: transparent (IR-blocked) or translucent card 30 mil (clear and colored)**
Technology cards: contact and contactless smart cards, UHF cards**
COMMUNICATIONS INTERFACES
USB 2.0
USB supports plug-and-play printer identification
10/100 Ethernet
802.11 b/g wireless connectivity
ELECTRICAL
Auto-switching single-phase AC power
100V~240V AC and 50-60 Hz
PHYSICAL
Height (w/ card hoppers): 13.2”/334 mm
Width (w/ card hoppers): 18.75”/476 mm
Width (w/ card hoppers, w/ laminator): 30.75”/781 mm
Depth: 20.4”/519 mm
Weight (printer only): 27.5 lbs./12.5 kg
Weight (printer, laminator): 44 lbs./20 kg
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라프린터 Zebra ZT410RFID ZT420RFID 열전사감열 산업용 RFID프린터 매뉴얼HION IT
Zebra ZT400 시리즈 RFID 프린터 / 인코더는 혹독한 환경 속에서 안정적인 인쇄와 인코딩에 필요한 고급 기능을 제공합니다.
RFID 라벨링의 가격대비 성능을 선도하는 지브라의 ZT400 RFID 프린터는 여러 산업분야의 다양한 애플리케이션을 지원합니다.
지브라 ZT400 RFID는 RZ™ 시리즈보다 처리량 및 극한 환경에서 생산성을 향상시키는 견고한 금속 프레임을 특징으로합니다.
ZT400 시리즈는 4인치 ZT410 및 6인치 ZT420 은 0.6 "/ 16 mm의 작은 라벨을 인쇄 및 인코딩 할 수 있으며, 소형 라벨 애플리케이션에 대한 정확한 등록으로 최대 600 dpi를 인쇄 할 수 있습니다.
직렬, USB 2.0, 블루투스 및 10/100 이더넷 통신을 비롯한 다양한 표준연결 옵션은 물론 802.11 a / b / g / n 보안 무선 및 병렬 옵션도 제공합니다.
Integrated ThingMagic® RFID reader/encoder
RFID system is available as a factory- or field-installable option
Prints and encodes tags with a minimum pitch of 0.6”/16 mm
Supports tags compatible with UHF EPC Gen 2 V1.2/ISO 18000-6C
Compliant with Global RFID radio to support multinational deployments
Adaptive encoding technology automatically eliminates complex RFID placement guidelines
Variable inlay placement supports a range of inlay positions for maximum media flexibility
Auto-tag calibration for label lengths of 2” or greater
Optimised for throughput of both small and large labels
RFID job-monitoring tools track RFID performance
Support for industry standard multi-vendor chip-based serialization (MCS)
Supports block permalocking of user memory compatible with ATA Spec 2000
RFID ZPL® commands provide compatibility with existing Zebra RFID printers
RFID
Integrated RFID system is user-upgradable in the field
Prints and encodes tags with a minimum pitch of 0.6”/16 mm
Supports tags compatible with UHF EPC Gen 2 V1.2/ISO 18000-6C
Compliant with Global RFID radio to support multinational deployments
Automatically eliminate complex RFID placement guidelines with adaptive encoding technology
Variable inlay placement supports a range of inlay positions for maximum media flexibility
Track performance with RFID job-monitoring tools
Support for industry standard multi-vendor chip-based serialization (MCS)
Supports block permalocking of user memory compatible with ATA Spec 2000
Integrated ThingMagic® RFID reader/encoder
PRINTER SPECIFICATIONS
Resolution :
203 dpi/8 dots per mm
300 dpi/12 dots per mm (optional)
600 dpi/24 dots per mm (optional for ZT410 only)
Memory :
256 MB RAM memory (4 MB user available)
512 MB Flash memory (64 MB user available)
Maximum Print Width : 4.09"/104 mm
Maximum Print Speed : 14 ips/356 mm
Media Sensors : Dual media sensors: transmissive and reflective
Media Characteristics : Media web width (label and liner)
1.00"/25.4 mm to 4.5"/114 mm tear/cutter
1.00"/25.4 mm to 4.25"/108 mm peel/rewind
Maximum non-continuous label length: 39"/991 mm
Print Length :
203 dpi : 157”/3988 mm
300 dpi : 73”/1854 mm
600 dpi : 39”/991 mm
Maximum Media Roll Size : 8.0"/203 mm O.D. on a 3"/76 mm I.D. core
Media Thickness : 0.0023"/0.058 mm to 0.010"/0.25 mm
Media Types : Continuous, die-cut, notch, black-mark
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라프린터 Zebra ZT410 ZT420 열전사감열 산업용 바코드프린터 매뉴얼HION IT
지브라프린터 ZM400 후속 모델로 지브라 ZT400 시리즈 (ZT410, ZT420), 바코드프린터는 다양한 어플리케이션에서 장시간 사용이 가능 하도록 설계된 뛰어난 산업용프린터로 귀사의 중요 업무를 효율적으로 지원 할 것입니다.
ZT400 시리즈 (ZT410, ZT420), 바코드프린터는 현장에서 입증된 Z Series의 신뢰성을 바탕으로 인쇄속도 인쇄품질 및 네트워크 연결 옵션을 더욱 개선하였습니다.
또한 사용자 편의성을 고려하여 디자인된 ZT400 시리즈 바코드프린터는 직관적인 아이콘 기반의 LCD 그래픽 사용자 인터페이스를 제공하며 소모품을 간편하게 장착할 수 있습니다.
통신연결은 USB, 직렬, 이더넷 및 블루투스 포트를 기본으로 제공하며, 확장된 RFID 기능은 더욱 강력한 추적 능력과 상세한 가시성을 제공합니다.
ZT400 시리즈 (ZT410, ZT420), 바코드프린터는 4인치, 6인치 모델로 제공되며, 귀사의 바코드프린터 투자에 현재와 미래의 요구를 항상 충족시킬 수 있도록 광범위한 고급 기능을 표준으로 제공합니다.
외관은 전체가 금속 프레임과 접이식 도어로 구성되어 공간이 제한된 환경에 적합하도록 설계되었습니다.
강력한 멀티플렛폼 SDK (Software Development Kit)와 소프트웨어 어플리케이션이 결합된 혁신적 운영체제인 제브라의 Link-OS 환경을 통해 전세계 어디에서나 통합, 관리, 유지보수가 용이합니다.
ZT410
Maximum print width : 4 인치
Maximum ribbon length : 450 m
Maximum print speed ; 14 ips
User Interface : LCD
Print resolution : 203, 300, 600 dpi
Printer control language : ZPL, EPL, others
ZT420
Maximum print width : 6 인치
Maximum ribbon length : 450 m
Maximum print speed ; 12 ips
User Interface : LCD
Print resolution : 203 and 300 dpi
Printer control language : ZPL, EPL, others
어플리케이션 유연성
폭넓은 범위의 사용가능한 미디어와 미디어 배송 옵션으로 프린팅 준비성 확대
최종 사용자가 설치 가능한 미디어 핸들링 옵션으로 현재와 미래의 비지니스 요구에 맞게 프린터 커스터마이징 가능
직렬, USB, 이더넷 및 블루투스의 기본 제공 및 기타 연결 옵션을 위한 두개의 개방형 미디어 슬롯
설치 및 사용 용이성을 고려한 확장된 RFID 기능
고해상도 인쇄기능으로 소형 바코드라벨 어플리케이션에서 고품질의 결과물 보장
간편한 통합
USB 호스트 포트의 장착으로, 미러링을 통한 USB 플래시 드라이브 데이터의 간편한 전송과 확장된 매핑 드라이브 메모리 기능을 활용하여 간단한 프린터 설정 가능
Virtual Device 앱을 통해 ZPL 및 EPL 이외 주요 래거시 및 경쟁사 프린터 언어를 지원함으로 미래에 대비한 투자 가능
용이한 조작
Dynamic QR 코드로 프린터 오류의 신속한 해결을 위한 온디맨드, 웹 기반의 지원 제공
Print Touch 를 지원하는 Link-OS 프린터는 NFC(Near Field Communicatrion)를 사용하여 웹 페이지 실행, 사용법에 관한 동영상과 제품 지원에 관한 지브라의 광범위한 지식 기반에 편리하게 엑세스
미디어 및 리본 경로의 조명으로 어두운 환경에서도 프린터 내부 확인 용이
간단한 관리
지브라의 Link-OS 환경으로 어느 곳에서나 프린터의 모니터, 관리 및 유지보수가 가능한 진보된 기능 제공
Clould Connect를 이용하여 인쇄 및 기기 관리를 위한 Link-OS 지원 프린터와 클라우드의 안전하고 직접적인 상호 작용 가능
Profile Manager를 통해 전세계 어디에서든 단일 프린터, 복수의 프린터, 또는 네트워크상의 모든 Link-OS 지원 프린터를 편집 및 관리
PRINTER SPECIFICATIONS
Resolution :
203 dpi/8 dots per mm
300 dpi/12 dots per mm (optional)
600 dpi/24 dots per mm (optional for ZT410 only)
Memory : 256 MB SDRAM/ 512 MB on-board linear Flash memory
Maximum Print Width : 4.09"/104 mm
Maximum Print Speed : 14 ips/356 mm per second
Media Sensors : Dual media sensors - transmissive and reflective
Media Characteristics - Media web width (label and liner):
1.00"/25.4 mm to 4.5"/114 mm tear/cutter
1.00"/25.4 mm to 4.25"/108 mm peel/rewind
Maximum non-continuous label length: 39"/991 mm
Print Length :
203 dpi : 157”/3988 mm
300 dpi : 73”/1854 mm
600 dpi : 39”/991 mm
Maximum Media Roll Size : 8.0"/203 mm O.D. on a 3"/76 mm I.D. core
Media Thickness : 0.0023"/0.058 mm to 0.010"/0.25 mm
Media Types : Continuous, die-cut, notch, black-mark
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라프린터 Zebra ZT220 ZT230 열전사감열 산업용 바코드프린터 매뉴얼HION IT
S4M 바코드프린터의 장점을 바탕으로 고객으로부터의 다양한 의견 수렴을 통하여 출시된 새로운 ZT200 시리즈 바코드프린터는 우수한 공간 절약형 디자인, 손쉬운 설정, 직관적인 사용자 운영 그리고 편리한 서비스 및 유지보수 등의 특징을 가지고 있습니다.
ZT200 바코드프린터 시리즈는 바코드 기술의 신규 도입부터 기존 바코드프린터 모델의 업그레이드까지, 다양한 라벨링 어플리케이션에 적합한 탁월한 선택이며, 이 혁신적인이고 새로운 프린터는 많은 사용자에게 혜택을 제공할 것입니다.
지브라 ZT200 바코드프린터 시리즈는 효율적인 디자인과 작은 크기로 Stripe와 S4M 모델 보다 물리적 공간을 더욱 작게 차지하며 최소한의 운영자 교육, 주요 구성요소에 대해 공구가 필요없는 유지보수 서비스를 제공합니다.
또한 기존 시스템과의 완벽한 호환성을 제공하기에 IT 담당자는 다운타임을 최소화하면서 새로운 프린터를 운영할 수 있습니다.
ZT220
지브라의 가장 저렴한 탁상용 프린터
충격에 강하고 견고하여 오래 사용할 수 있는 폴리머 케이스
300m 리본 용량
사용자가 간단하게 사용할 수 있는 3개의 조작 버튼
바코드라벨의 교체가 빈번하게 발생하는 작업에 이상적입니다.
ZT230
견고한 금속 케이스로 오래 사용할 수 있습니다.
가동 시간을 늘리고 리본 교환 횟수를 줄이기 위한 450m 리본 용량
화면 표시 내용이 그래픽으로 처리되어 바코드프린터 설정 및 제어가 편리함
바코드라벨의 교체가 좀 더 빈번하게 발생하는 작업에 이상적입니다.
지브라 ZT200 바코드프린터 시리즈는 고객의 다양한 의견과 고객의 프린팅 어플리케이션, 진화하는 비즈니스 요구와 운영상의 문제점에 대한 이해를 바탕으로 설계된 최고의 제품으로, ZT200 시리즈는 동급 프린터에서 일반적으로 찾을 수 없는 탁월한 성능과 특징을 제공합니다.
공간 절약형 디자인
제한된 좁은 공간에 적합한 작은 설치 공간과 효율적인 설계
업무 공간을 최대화하며 좁은 공간에도 적합한 독특한 접이식 도어의 공간 절약형 디자인(개방 공간 102mm/4” 필요)
빠른 설치 및 통합
구형 Stripe 및 S4M 모델의 완벽한 후속 모델
다중 연결 옵션: 병렬, 10/100 이더넷, 802.11b/g/n 무선
아이콘 기반의 상태 LED로 프린터 상태를 쉽고 즉각적으로 파악
직관적이고 손쉬운 미디어 장착
복잡한 소모품 장착을 간소화하는 측면 장착 디자인
처음 사용자도 리본 및 미디어를 장착할 수 있도록 색깔로 표현된 시각적 안내 제공
미디어를 통해 보이는 발광형 이동식 센서로 간단하게 센서 위치 조정
인쇄 품질
미세 조정으로 더 나은 인쇄 정확도를 보장하도록 제작
선명하고 깔끔한 텍스트 및 바코드 - 좁은 미디어에서도 가능
Zebra 신뢰성과 내구성
경공업 및 상업 환경에 적합하도록 제작
Energy Star® 인증
최소한의 유지보수로 최적의 성능을 제공하도록 설계된 드라이브 시스템
간소화된 사용성
플래턴과 프린트헤드를 도구없이 쉽게 제거함으로써 간단히 청소와 교체 가능
손쉽게 교체 가능한 연결 옵션으로 신속한 프린터 교체 및 업그레이드 가능
일반적인 도구 3개로 기본 서비스 가능
PRINTER SPECIFICATIONS
Resolution ;
8 dots per mm/203dpi
12 dots per mm/300dpi (optional)
Memory : Standard / 128MB flash (58MB user-available), 128MB DRAM
Print width ;
104mm/4.09"
Minimum: 0.75"/19.4mm
Print speed : 152mm/6" per second
Media sensors : Transmissive and reflective sensors
Media characteristics ;
Maximum label and liner width : 114mm/4.5"
Maximum non-continuous label length : 991mm/39"
Media width : 19.4mm/0.75" to 114mm/4.50"
Print length ;
203dpi : 3,988mm/157"
300dpi : 1,854mm/73"
Maximum media roll size ;
203mm/8.0" O.D on a 76mm/3.0" I.D. core
152mm/6.0" O.D. on a 25mm/1.0" I.D. core
Media thickness : 0.076mm/0.003" to 0.25mm/0.010"
Media types : Continuous, die-cut, notch, black-mark
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라프린터 Zebra ZE500시리즈 열전사감열 RFID프린터엔진 오토라벨러엔진 바코드프린터엔진 매뉴얼HION IT
지브라의 새로운 ZE500™ 시리즈는 OEM 바코드 인쇄 엔진에 대한 혁신적인 접근 방식을 채택했습니다.
Zebra ZE500 시리즈 바코드 프린터 엔진은 광범위한 설문 조사를 활용하여 디자인, 사용 편의성, 서비스 및 통합 용이성에 중점을 두고 중요한 자동라벨링 업무에 중단없이 작동하도록 설계되었습니다.
우아한 디자인의 ZE500 바코드 프린터 엔진은 유지 보수를 단순화하고 유지 보수에 대한 가동 중단 시간을 획기적으로 줄여주며 3개의 롤러는 모두 프린터의 전자 장치에 접근할 필요없이 수 분 만에 교환 할 수 있습니다.
와이드 오픈 프린트 헤드는 청소 및 교체를 단순하게하며 퀵 체인지 모듈 식 드라이브 시스템은 프린터 수리 시간을 줄입니다.
확장된 RFID 기능은 보다 향상된 추적 성능을 제공하여 운영 효율성을 향상시킵니다.
리본 교체와 같은 일상적인 작업은 매우 간단합니다 (두 인쇄 폭 모두 동일).
새로운 그래픽 LCD 디스플레이는 장치에서 분리할 수 있으며 사용 편의성을 위해 응용 프로그램에 적합한 위치에 재배치 할 수 있습니다.
인쇄 및 적용할 기계와 쉽게 통합할 수 있으며 먼지와 물에 대한 내성이 뛰어납니다.
확장된 연결 포트 및 어플리케이터 포트의 향상된 소프트웨어 제어 기능은 통합 유연성을 한층 향상시킵니다.
Resolution: 203 dpi (8 dots per mm); 300 dpi (12 dots per mm)
Rotatable front panel display (0,180)
16MB SDRAM memory, 64MB Flash Memory
Available in right and left hand configurations
ZebraNet 10/100 Print Server (Internal)
Embedded ZebraLink WebView™and Alert features
Real Time Clock
Applicator interface - provides status and control signals for applicators
Communications via serial RS-232, IEEE 1284 bidirectional parallel interface with auto detect, and USB 2.0 port
Full function graphic front panel & large multilingual back-lit LCD display with user programmable password protection
Thin film print head with E3® Element Energy Equalizer
Dual media sensors, transmissive and reflective, selectable through software or front panel
ZPL® or ZPL II® programming language, selectable through software or front panel
XML-Enabled Printing ? allows XML communications from today's enterprise systems for barcode label printing
32 bit 133 MHz RISC processor
Zebra printer driver for Windows 7, XP, Vista, 2008, and 2003 operating systems
Advanced media counters
PRINTER SPECIFICATIONS
ZE500-4™ :
Maximum print width : 4.1”/104 mm
Media specification :
Label and liner width: 0.625”/16 mm to 4.5”/ 114 mm
Minimum length with back feed: 0.5”/13 mm
Minimum length without back feed: 0.25”/6.5 mm
Minimum length in stream mode: 0.25”/6.5 mm
Maximum length: 39”/990 mm
Maximum continuous media print length: 150”/3,810 mm
Ribbon width: 1”/25.4 mm to 4.2”/107 mm
Resolution : 203 dpi/8 dots per mm or 300 dpi/12 dots per mm
Maximum print speed : 12”/305 mm per second (203 and 300 dpi)
ZE500-6™ :
Maximum print width : 6.6”/168 mm
Media specification
Label and liner width : 3”/76 mm to 7.1”/180 mm
Minimum length with back feed : 3”/76 mm
Minimum length without back feed : 1”/25.4 mm
Minimum length in stream mode : 1”/25.4 mm
Maximum length : 39”/990 mm
Maximum continuous media print length : 150”/3,810 mm
Ribbon width : 3”/76 mm to 7.1”/180 mm
Resolution : 203 dpi/8 dots per mm or 300 dpi/12 dots per mm
Maximum print speed
12”/305 mm per second (203 dpi)
10”/254 mm per second (300 dpi)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
고객의 니즈를 충족시키는 고성능 옵션의 지브라 G 시리즈™ GX™ 및 ZD500™ 데스크탑 바코드프린터는 가장 빠른 인쇄 속도와 함께 이더넷, LCD 화면, 무선 또는 블루투스를 비롯한 다양한 첨단 기능 및 옵션을 제공합니다.
확장된 미디어 처리 기능으로 Peel & Present와 라벨, 영수증 및 태그에 적합한 정밀 커터, 라이너리스 라벨 등을 제공합니다.
지브라 GX™ 시리즈 및 ZD500™ 고성능 바코드프린터는 지브라 데스크탑 바코드프린터 제품군 중에서 가장 빠른 인쇄 속도와 완벽한 기능 세트를 제공합니다.
혁신적인 라벨, 영수증 및 태그 처리 기능을 갖추고 있어 필요한 유연성을 얻을 수 있습니다.
최상의 인쇄 품질과 다양한 연결 옵션을 제공하는 GX420™, GX430™ 및 ZD500 프린터는 다양한 애플리케이션을 지원하고 거의 모든 환경에 통합 가능하기 때문에 사용자가 효율과 수익을 높이고 시간을 절약하여 작업자 교육을 최소화할 수 있습니다.
고해상도의 인쇄 품질, 4개의 연결 옵션을 제공하는 ZD500 프린터는 컴팩트하며 최고의 성능에 필요한 기능들을 탑재한 프린터입니다.
어디에서든지 손쉽게 통합, 관리 및 유지보수할 수 있는 Link-OS 지원 프린터입니다.
감열 또는 열전사 모드로 작동합니다.
포함된 기능
지브라의 고성능 데스크탑 바코드프린터는 향상된 효율성과 생산성을 위해 동급 최고의 인쇄 속도와 기능을 제공합니다.
각 모델은 다양한 연결 옵션과 ZPL® 및 EPL™(GX 모델만 해당) 프로그래밍 언어로 손쉬운 업그레이드 및 통합을 제공하고 총 소유비용(TCO)을 절감할 수 있는 ENERGY STAR™ 인증 프린터입니다.
애플리케이션 유연성을 극대화해주는 강력한 기능
확장된 미디어 핸들링 옵션으로 Peel & Present와 라벨, 영수증 및 태그, 라이너리스 라벨에 적합한 Cutter 등을 제공합니다.
블루투스와 WiFi를 포함한 다양한 연결 옵션. LCD 디스플레이(옵션)를 통해 프린터 설정을 변경할 수 있습니다.
특정 요구에 맞도록 구성 가능
감열 또는 열전사 모델로 제공되는 이들 소형 바코드프린터는 직관적인 디자인과 다양한 연결 옵션을 갖추고 있습니다.
GX430과 ZD500 프린터 모두 300 dpi 고해상도 인쇄가 가능하므로 텍스트와 그래픽으로 구성된 소형 바코드라벨 인쇄에 적합합니다.
PRINTER FEATURE
Print methods : Thermal Transfer and Direct Thermal
ZPL programming language
EPL programming language (GX model only)
Dual-wall frame construction
Tool-less printhead and platen replacement
Open ACDESS for easy media loading
Quick and easy ribbon loading
Simplified calibration of media
ENERGY STAR qualified
PRINTER SPECIFICATIONS
Resolution :
203 dpi/ 8 dots/mm per mm
300 dpi/ 12 dots/mm per mm (optional on ZD500)
Memory:
128 MB Std SDRAM memory (4 MB available to user)
256 MB Std Flash memory (56 MB available to user)
Real time clock
Maximun Print Width : 4.09"/ 104 mm
Maximun Print Length : 39.0"/ 990 mm
Maximun Print Speed :
6"/152 mm per second (203 dpi)
4"/102 mm per second (300 dpi)
Media Sensors : Multi-position transmissive and adjustable reflective sensor
MEDIA CHARACTERISTICS
Label and Liner Length :
Maximum non-continuous : 39"/ 990 mm
Maximum using tear off mode : .25" (6.3 mm)
Minimum with label present sensor used : 0.5"/ 12.7 mm
Minimum with cutter : 1.0"/ 25.4 mm
Label and Liner Width : 0.75"/ 19 mm - 4.25"/ 108mm
Media Roll Size :
Maximum outside diameter : 5"/127 mm
Core inner diameter : 0.5"/ 12.7 mm, 1.0"/25 mm, 1.375"/ 35 mm, 1.5"/37.1 mm, 3"/ 76mm
Media Thickness : .003"/0.08 mm to .012"/ 0.305 mm
Media type : Roll-fed or fan-fed, dia-cut or continuous direct thermal label with or wothout black tag, stock, continuous receipt paper, wristbands
Ribbon charcateristics :
Outside diameter : 1.36"/ 35 mm
Standard length : 244"/ 74 m
Ratio : 1:1 media to roll to ribbon
width : 1.33"/ 33.8 mm to 4.3"/ 109.2 mm
Core inner diameter : 0.5"/ 12.7 mm
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라 QLn 시리즈 모바일 프린터의 확장인 QLn220 ™ 및 QLn320 ™ 헬스케어 프린터는 의료 시설의 요구에 맞게 특별히 설계되었습니다.
지브라 헬스케어 모바일 프린터는 세균으로 부터 환자를 보호하기 위해 내구성이 높고 소독이 가능한 재료를 사용하여 제작되었습니다.
특히 의료용으로 개발된 Zebra의 QLn 시리즈 프린터를 사용하면 다음과 같은 업무를 지원합니다.
병원 침상 옆의 표본을 모으고, 수집 및 관련 레이블을 만들 수 있습니다.
Zebra의 Link-OS® 환경으로 모든 인쇄 장치를 가상으로 관리, 유지 보수 및 업그레이드 할 수 있습니다.
프로파일 관리자 응용프로그램을 사용하여 프린터 구성을 제어하고 형식 출력 및 인쇄물의 일관성을 유지합니다.
서비스 요청 감소
CLSI (Clinical and Laboratory Standards Institute®) 표준을 만족하는 라벨 인쇄
STANDARD FEATURES
Includes disinfectant-ready plastics in a lighter healthcare color scheme
Apple® iOS, Android, Windows Mobile and BlackBerry® connectivity
Direct thermal printing of barcodes, text and graphics
CPCL, EPL™ and ZPL® programming languages
256 MB Flash supports downloadable programs, receipt formats, fonts and graphics (64 MB available for user storage)
2450 mAh (nominal) 18.1 Wh removable, rechargeable Li-Ion battery
Built-in battery charger
IEC 60601-certified AC adapter for medical environments
Serial and USB ports (both support strain relief)
Belt clip for unobtrusive and convenient printing (not compatible with extended capacity battery)
Black mark and gap media sensing using fixed center position sensors
Easy-to-use peel and present mode
Label present sensor for issuing labels one at a time
Tear bar for easy media dispensing
Center-loading media locking for variable roll widths
“Clamshell” design for easy media loading
Management: Mirror, SNMP, Web server, Profile Manager, AirWatch® and Wavelink Avalanche®
Large, easy-to-read LCD control panel (240 x 128 pixels)
LCD can be customized using WML (text and icons)
5-way navigation buttons, two software defined keys
Printer alerts on the display, help menus
Tolerance of multiple drops from 5’/1.52 m to concrete
IP43 dust- and water-resistance rating (IP54 with soft case)
400 MHz 32-bit ARM processor
XML support
Supports vertical and horizontal printing
Printers can be used in any orientation
QR barcode links to web-based help pages
Zebra Print Touch simplifies Bluetooth pairing and launches web-based help pages with Near Field Communication (NFC) enabled devices
Label odometer
Real-time clock
PRINTER SPECIFICATIONS
Resolution : 203 dpi/8 dots per mm
Memory : 128 MB RAM; 256 MB Flash (standard)
Print Width : 1.9”/48 mm
Print Length : Min: 0.5”/12.7 mm, Max: 32”/813 mm
Print Speed : Up to 4”/102 mm per second
Media Sensors : Black mark and gap media sensing using fixed center position sensors; label present sensor for issuing labels one at a time
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라 MP6000, 2D 고정식 바코드스캐너는 거의 모든 인쇄 또는 휴대폰, 태블릿PC 화면의 1D 또는 2D 바코드를 사실상 놀라운 속도로 모든 상황에서 캡처 할 수 있습니다.
놀라운 스캔 성능
지브라의 업계에서 입증된 선도적인 이미징 기술을 사용하면 오늘날 사용 가능한 어떤 레이저 바이옵틱 스캐너보다 빠른 속도로 바코드를 스캔할 수 있습니다.
각종 바코드 캡처
어떤 종류의 1D 및 2D 바코드라도 자동으로 판독/평가할 수 있습니다.
종이 라벨에 인쇄되어 손상되었든, 플라스틱 고객카드나 기프트카드에 인쇄되어 있든, 휴대전화 화면에 표시되어 있든 상관 없습니다.
탁월한 신뢰성, 비용 및 총소유비용(TCO) 절감
고장 및 유지 관리 비용을 최소화할 수 있습니다. 스캔 엔진에 작동 부품이 없으므로 전력 소비량이 최소 30% 감소하고 정전용량형 버튼도 마모되는 일이 없습니다.
매장 및 고객 요구 사항에 맞게 맞춤 가능
6개 포트가 있으므로 스케일, 고객이 휴대전화나 고객카드의 바코드를 스캔할 수 있는 고객 스캐너(Customer Side Scanner), 핸드헬드 스캐너, EAS 기기 등과 같은 새로운 기능을 손쉽게 추가할 수 있을 뿐만 아니라, RFID와 같은 미래의 요구 사항에 맞게 확장도 가능합니다.
탁월한 관리 기능
보완적 관리 소프트웨어를 사용하면 스캐너, 스케일, 연결된 모든 주변 기기를 비롯해 전체 스캐너 솔루션을 원격으로 관리할 수 있습니다.
사파이어 유리
수평 스캔 창에 업계 최고의 유리를 사용하여 긁히지 않고 마모나 훼손에도 취약하지 않습니다.
통합 EAS 지원
현재 사용 중인 Checkpoint® 또는 Sensormatic® 시스템을 지원하므로 업그레이드하느라 별도의 시간 및 비용이 들지 않습니다.
초 저소음
레이저 스캐너와 달리 모터 소음이 없는 MP6000은 매우 조용하여 POS 환경을 개선시켜 줍니다.
사용 편의성
전방향 스캔 및 6면 720° 커버리지 영역을 지원하므로 신속하게 스캔하고 정확하게 계산을 마칠 수 있습니다.
고객측 스캐너(옵션)
고객이 자신의 고객카드, 쿠폰, 충동 구매 품목 및 휴대전화에 표시된 바코드를 동시에 스캔할 수 있습니다.
손쉬운 설치
기존 계산대에 잘 맞습니다.
3개의 프로그래밍 버튼
푸시버튼을 사용해 광범위한 POS 프로세스를 간소화하여 처리량을 향상시켜 줍니다.
PHYSICAL CHARACTERISTICS
Dimensions :
Long scanner and scanner/scale :
20 in. L x 11.5 in. W x 4.00 in. D x 5.00 in. H / 507 mm L x 292 mm W x 102 mm D x 128 mm H
Medium scanner and scanner/scale : 15.7 in. L x 11.5 in. W x 4.00 in. D x 5.00 in. H / 399 mm L x 292 mm W x 102 mm D x 128 mm H
Short scanner : 13.9 in. L x 11.5 in. W x 4.00 in. D x 5.00 in. H / 353 mm L x 292 mm W x 102 mm D x 128 mm H
Weight :
Long scanner : 15.2 lb./6.9 kg
Long scanner/scale : 18.3 lb./8.3 kg
Medium scanner : 13.0 lb./5.9 kg
Medium scanner/scale : 16.2 lb./7.4 kg
Short scanner : 12.0 lb/5.4 kg
Scale :
30 lb. in 0.01 lb. increments/15 kg in 5 g increments
Maximum static weight: 300 lb./136 kg
Scale can be added after scanner installation (most countries)
Single-cable and dual-cable protocols
Compatible with Mettler and Bizerba price computational scales
Options :
0-12 lb. in 0.005 lb. increments and 12-30 lb. in 0.01 lb. increments
0-6 kg in 2 g increments and 6-15 kg in 5 g increments
Single-head and dual head remote scale displays
Dual heads rotate throug 290° for widest viewing angles on the market
Horizontal Glass : Sapphire; integrated Produce Lift Bar
User Interface :
Soft touch capacitive pads (no buttons to break or wear out)
Wide, centrally located two-color decode/ information bar (clear for cashiers and self-checkout users)
Beeper: adjustable volume and beep tones
Three programmable buttons
Ports :
One shared POS port for USB/RS-232/ IBM RS-485
Three USB peripheral ports
Two powered RS-232 peripheral ports
Checkpoint interlock port
Remote scale display port
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라PDA Zebra TC70 2D 산업용PDA 안드로이드 바코드PDA 매뉴얼HION IT
지브라 TC70 / TC75 산업용 PDA는 처음부터 기업용으로 제작된 전문가용 안드로이드 디바이스입니다.
업무를 효율적으로 처리하고 고객에게 향상된 서비스를 제공하려면 지속적인 통신과 정보 액세스가 가능한 엔터프라이즈급 핸드헬드 컴퓨터가 필요합니다.
그러나 직원들은 일반 소비자 기기와 같이 세련되고 사용하기 쉬운 장치를 원합니다.
지브라 TC70 바코드 PDA는 이 두 가지 요구를 모두 충족시킬 수 있습니다.
Mobility Extensions(Mx)는 AndroidTM 를 진정한 의미의 엔터프라이즈급 운영체제로 만들어줍니다.
Zebra TC70 안드로이드 기반의 산업용 PDA는 견고한 디자인으로 가장 까다로운 환경에서도 안정적으로 사용할 수 있으며 양방향 무전기로도 활용할 수 있습니다.
내장 스캐너와 카메라를 사용하면 어떠한 유형의 비즈니스 인텔리전스도 자동으로 캡처할 수 있습니다.
완벽한 액세서리 및 최신 기술 구성으로 현재뿐 아니라 미래 비즈니스까지 지원할 수 있으므로 높은 투자 수익률을 기대할 수 있습니다.
지브라 TC70은 소매, 제조 및 영업 분야에서 고객에게 보다 나은 서비스를 제공할 수 있습니다.
실질적인 경쟁 우위를 확보할 수 있습니다.
Mobility Extensions(Mx) 및 Mobility DNA와 함께 기업용으로 강화된 Android KitKat
모든 TC70/ TC75 산업용 PDA에는 안드로이드를 소비자급 운영 체제(OS)에서 진정한 엔터프라이즈급 OS로 변신시켜주는 Mobility Extensions(Mx)가 함께 제공되며, 엔터프라이즈급 보안과 장치 관리가 가능하고 엔터프라이즈급 데이터 캡처 기능을 지원합니다.
완벽한 성능뿐 아니라 간편한 Mobility DNA로 모빌리티 효율성을 향상시킵니다.
이 모빌리티 솔루션은 Zebra 모바일 기기에 통합된 상용, 최종 사용자 앱, 강력한 관리 유틸리티 및 간편한 앱 개발 도구를 기반으로 가장 빠르고 간편한 모바일 성능을 지원합니다.
데이터 입력 유연성을 극대화 하기위한 업계 최고의 듀얼 모드 터치 패널
맨 손가락 및 장갑 낀 손가락 또는 맨 손가락 및 스타일러스 등 선호하는 데이터 입력 모드를 선택할 수 있어, 선명한 서명 캡처에 이상적입니다.
데이터 입력 방법을 전환할 때마다 설정을 조정해야 하는 경쟁사 장치와는 달리, 이 지능형 4.7인치 디스플레이는 필요에 따라 자동으로 조절됩니다.
업계 최고의 포괄적인 오디오 기능으로 새로운 차원의 음성 유연성 지원
대중적인 스마트폰의 음량을 최대 4배까지 증폭하고 소음 제거 기술을 제공하는 TC70/ TC75 PDA는 모든 통화마다 양쪽 사용자에게 깨끗한 오디오 품질을 선사합니다.
Workforce Connect PTT(Push-to-Talk) Express 및 Pro 지원으로 현장에서 동료와 빠르게 연결될 수 있으며 관리자 및 다른 사무 지원 인력과의 협업을 통해 고객 요구에 신속하게 대응할 수 있습니다.
PHYSICAL CHARACTERISTICS
Dimensions : 6.3 in. L x 3.3 in. W x 1.1 in. D/ 161 mm L x 84 mm W x 28 mm D
Weight : 13.3 oz./376 g
Display : 4.7 in. High Definition (1280 x 720); exceptionally bright, outdoor viewable; optically bonded to touch panel
Imager Window : Corning Gorilla Glass 2
Touchpanel : Dual mode capacitive touch with stylus or bare or gloved fingertip input (conductive stylus sold separately); Corning Gorilla Glass 2
Backlight : LED backlight
Power : PowerPrecision: Li-Ion 3.7 V, 4620 mAh
Expansion Slot : User accessible 32 GB microSD slot with SDHC and SDXC support
Network Connections : USB 2.0 High Speed (host and client); WLAN
Notification : Audible tone; multi-color LEDs; vibration
Keypad : On-screen keypad
Voice and Audio : Three microphone support with noise cancellation; vibrate alert; speaker; Bluetooth wireless headset support
PERFORMANCE CHARACTERISTICS
CPU : 1.7 GHz dual core processor
Operating System : AndroidTM AOSP 4.4.2 (KitKat)
Memory : 1 GB RAM / 8 GB Flash pSLC
WIRELESS PAN
Bluetooth Bluetooth v4.0 (Bluetooth® Smart technology)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라PDA Zebra TC55 2D 산업용PDA 안드로이드 바코드PDA 매뉴얼HION IT
지브라 TC55 산업용PDA를 통해 효율성과 고객 서비스 개선 작업을 처리하려면 작업자에게 실시간 데이터에 대한 안전하고, 신뢰할 수 있는 원격 액세스가 필요합니다.
개인용 스마트폰, 태블릿PC 및 랩톱은 매력적이고 사용하기 쉽지만 매일 비즈니스에 사용하는 데 필요한 내구성 또는 기능성이 떨어지는 문제가 있기 때문에 포켓 크기의 지브라 TC55 산업용 PDA는 이와 같은 걱정이 없습니다.
Zebra TC55 산업용 PDA는 자주 사용되는 개인용 기기의 최근 기술에, 세련된 디자인, 사용 편의성을 바탕으로 하지만 소비자용 모델과 달리 TC55에는 데이터 캡처 기능이 통합되어 있습니다.
TC55 바코드 PDA는 산업 환경에서의 마모를 견디도록 제작되었기 때문에 현장에서 고장이 발생할 가능성이 적습니다.
기업 환경의 일상적인 업무용으로 제작
지브라 TC55 바코드 DPA는 오랜 내구성을 제공하는 기능들을 갖추고 있습니다.
낙하 및 충격 사양, IP67 밀봉 및 Corning Gorilla Glass 2 디스플레이로 인해 낙하 및 유출 시에도 안정적인 작동이 보장되어 평균 수명 3년을 쉽게 달성할 수 있습니다.
최대 데이터 입력 유연성을 갖춘 업계 최고의 이중 모드 터치 패널
원하는 데이터 입력 모드를 손가락(두꺼운 장갑 착용 유무에 상관없음)또는 서명 캡처용 스타일러스 중에서 선택할 수 있습니다.
전력 소비가 적지만 매우 밝은 4.3인치로 정전식 터치 환경의 수준을 한 차원 높여줍니다.
지브라 TC55 모바일 컴퓨터는 또한 습기가 있는 상태에서도 작동하는 WVGA 디스플레이를 제공합니다.
데이터를 자동으로 캡처하고 전체 문서를 처리합니다.
SimulScan Document Capture를 통해 작업자가 하나의 버튼만 누르면 바코드, 텍스트 필드, 전화 번호, 이미지, 서명 및 확인란을 캡처할 수 있습니다. 즉, 송장 및 주문 처리 속도가 향상됩니다.
기업용 안드로이드
모든 지브라 TC55 산업용 PDA에는 소비자 운영체제의 AndroidTM 를 더욱 강화된 기업용 운영체제로 탈바꿈시킬 수 있는 다양한 기능을 제공하는 Mobility Extensions (Mx)가 기본으로 탑재되어 있습니다.
PHYSICAL CHARACTERISTICS
Dimensions (with standard battery) : 5.4 in. L x 2.7 in. W x 0.63 in. D/ 137 mm L x 69 mm W x 15.9 mm D
Weight With standard battery : 7.8 oz./220 g
Display : Blanview® LCD display, 4.3 in. WVGA, exceptional low power consumption, exceptionally bright image with 700 NITs, 3% transflective, Corning Gorilla Glass 3
Camera/Imager Exit Windows : Corning Gorilla Glass 3
Touchpanel : Dual mode capacitive touch with stylus or fingertip (bare or gloved) input
Backlight : LED backlight
Power :
PowerPrecision Li-Ion batteries
Two options: Extented 1.5x 4410 mAh or Standard Capacity 2940 mAh battery
Expansion Slot : User accessible 32 GB microSD slot with SDHC support
Network Connections : USB 2.0 High Speed (host and client), WLAN, WWAN and Bluetooth
Notification : Vibrate and audible tone
Keypad : On-screen keypad
Voice and Audio : 2 front facing speakers; dual noise-cancelling microphones; high-quality speaker phone; 3.5mm headset jack , Bluetooth wireless headset support
PERFORMANCE CHARACTERISTICS
CPU ; 1.5 GHz dual core processor
Operating System : Android 4.1.2
Memory : 1 GB RAM / 8 GB Flash MLC
USER ENVIRONMENT
Operating Temp. : 14°F to 122°F/-10°C to 50°C
Storage Temp. : -40°F to 158°F/-40°C to 70°C
Humidity : 5% to 85% non-condensing
Drop Specification ; 4 ft./1.2 m drop to plywood per MIL-STD 810G; With protective boot: 5 ft./1.5m to concrete at room temperature
Tumble Specification :
300 1.6 ft/0.5 m tumbles;
With protective boot: 1000 1.5ft./0.5 m tumbles; meets and exceeds IEC tumble
Thermal Shock : -40°F to 158°F/-40°C to 70°C rapid transition
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
Zebra의 산업용 PDA MC9500-K는 혁신적인 인체공학적 디자인과 기능을 결합하여 아무리 까다로운 현장에서도 모빌리티 애플리케이션을 지원함으로써 고급 러그드 모바일 컴퓨팅의 기대 수준을 높였으며, 지브라만의 혁신적인 이 기기는 외양만큼이나 내부도 다릅니다.
지브라 테크놀로지를 대표하는 MC9000 바코드 PDA 시리즈를 기반으로 한 MC9500-K 는 더 견고한 설계, 더 많은 데이터 캡처 옵션, 고객이 전환할 수 있는 WAN 서브 시스템과 키패드를 통한 진정한 WAN 기술 독립성 및 애플리케이션 유연성, 더 강력한 프로세싱 성능, 배터리 및 백룸 관리에 대한 획기적인 방식을 제공하면서도 더 가볍고 날렵하며 사용하기에 간편한 외관을 갖추고 있습니다.
차세대 인체공학적 디자인
지브라 산업용PDA MC9500-K의 작고 날렵하며 손에 쥐기 편한 외관은 새로운 차원의 편의성을 제공하며 키 기반 애플리케이션을 한 손으로 쉽게 조작할 수 있습니다. 고급 LCD 기술이 적용된 동급 최고의 디스플레이로 인해 어떤 조명 조건에서도 간편하게 볼 수 있습니다.
통신업체로부터의 진정한 독립을 가능케 하는 Zebra MAX FlexWAN
백룸에서 WAN 서브시스템을 원하는 대로 바꿀 수 있어 통신업체로부터의 진정한 독립을 가능케 하는 최초의 유일한 러기드 모바일 컴퓨터. 특허를 취득한 이 기능은 WAN을 채택하고 필요에 따라 셀룰러 네트워크를 변경할 수 있는 유연성을 제공함으로써 전체 작업자의 통신 범위를 최적화하고, 서로 다른 네트워크에서 재배포를 가능케하고, 라이프사이클을 연장하고, 기기 사용률을 개선합니다.
Zebra MAX 키패드
백룸에서 몇 분 내에 키패드를 바꿀 수 있는 유일한 러기드 모바일 컴퓨터. 특허를 취득한 이 기능을 통해 MC9500-K를 손쉽게 맞춤화할 수 있어, 기기를 간편하게 업그레이드하여 업데이트되거나 새로운 애플리케이션의 요구를 충족할 수 있습니다. 또한 키패드 교체를 위해 기기를 정비 센터에 반환할 필요가 없으므로 가동 시간이 개선됩니다.
PHYSICAL CHARACTERISTICE
Dimensions : 9.2 in. H x 3.5 in. W x 2 in. D (23.36 cm H x 8.89 cm W x 5.08 cm D)
Weight : 22 oz./623 g (including battery, stylus, keypad & strap)
Display : 3.7 in. VGA Color (TFT) Display (640 x 480) with touch panel and backlight
Keypad Options : Modular: alpha primary; numeric telephony, numeric calculator, alpha numeric
Expansion Slot : microSD slot - supports up to 32 GB
PERFORMANCE CHARACTERISTICS
CPU : Marvell PXA320 @ 806 MHz
Operating System : All models except MC959B: Windows Mobile 6.5
Memory : 256MB RAM/1GB Flash
BATTERY
Capacity : Rechargeable Lithium Ion 4800 mAh battery @ 3.7V – with State of Charge and State of Health indicators
Standby Time : 150 hours
Talk Time : 8 hours (minimum/suspend mode)
DATA CAPTURE
Scanning : 1D Scanner; 2D Imager; 3 MP auto-focus flashenabled digital color camera with symbology decode software
Scan Angle : Optimized for scanning (15° downward angle)
Options : Integrated Magnetic Stripe Reader (MSR) with encrypted head (optional)
COLOR CAMERA
Resolution : 3 megapixel
Illumination : User controllable flash
Lens : Autofocus
1D LASER SCANNER (SE950)
Range on 100% UCPA : 24 in./60 cm
Resolution : 4 Mil minimum element width
Roll : ±35° from vertical
Pitch Angle : ±65° from normal
Skew Tolerance : ±50° from normal
Ambient Light Immunity : LED: 450 Ft Candles (4,844 Lux), Sunlight: 8000 Ft Candles (86,111 Lux)
Scan Rate : 104 (±12) scans/sec (bi-directional)
Scan Angle : 47° ±3° default; 35° ±3° reduced
2D IMAGER (SE4500SR)
Focal Distance : From center of exit window: SR – 7.5 in./19 cm
Sensor Resolution : 752 x 480 pixels
Field of View Horizontal : 40°; Vertical: 25°
Skew Tolerance : ±60°
Pitch Tolerance : ±60°
Roll Tolerance : 360°
Ambient Light Immunity : 9,000 ft. candles/96,900 lux
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
견고한 지브라 MC67 산업용PDA 시리즈를 사용하여 보다 빠르고 스마트한 작업에 필요한 도구를 현장 근무자에게 제공하십시오.
작업자는 완벽한 기능을 갖춘 이 기기를 사용하여 백엔드 시스템의 정보에 액세스하고 조건에 관계없이 거의 모든 바코드를 스캔할 수 있으며 문서를 캡처하여 간편하게 기록을 보관할 수 있습니다. 또한 실시간 수리 지원을 위해 동영상과 사진을 촬영, 전송할 수 있으며 도착 창에서 고객에게 전화를 할 수 있습니다.
현장 업무에 최적화된 지브라의 MC67 바코드PDA는 보다 많은 작업, 예를들어 장비수리, 물품픽업 또는 배송, 주문접수, 건물 또는 레스토랑 점검, 고지서 발행 또는 경쟁 정보 수집 등을 수행하는 모바일 컴퓨터입니다.
MC67 Base 모델
비용 효과적인 라인 확장을 통한 현장 근무자의 생산성 향상
MC67 Base는 MC67 시리즈의 비용대비 효과적인 확장입니다.
튼튼한 보급형 플랫폼을 찾는 고객들에게 MC67 Base는 현장 근로자에게 생산성을 높일 수 있는 모든 기능을 제공하며 MC65 및 MC55 액세서리와 역호환이 될 뿐 아니라 MC67 프리미엄 버전으로 귀사 시스템에 액세스할 수 있도록 지원합니다.
Windows® Embedded Handheld 6.5가 실행되는 MC67 Base는 복잡한 애플리케이션, 유연한 고속 이동통신 및 Wi-Fi 무선 연결을 지원하고 거의 모든 유형의 데이터를 캡처할 수 있습니다.
결과는? 향상된 고객 서비스. 고객 만족도 제고. 고객 유지 가능성 증대.
MC67 Premium 모델
작업자가 작업을 수행하는 데 필요한 모든 기능 제공
MC67 Premium을 사용하는 경우 모빌리티 전략을 가장 효과적으로 지원하는 운영 체제(Windows® Embedded Handheld 6.5 또는 Android™ Jelly Bean 4.1)를 선택하여 다양한 비즈니스 시스템 정보에 빠르게 액세스함으로써 작업 효율성과 정확성을 향상시킬 수 있습니다.
수리가 필요한 장비를 촬영한 동영상 클립을 보내 내부 전문가 또는 장비 제조업체로부터 즉시 조언을 얻습니다.
고해상도 스냅 사진으로 상황을 기록, 바코드를 스캔하여 사용 중인 부품을 빠르고 정확하게 추적하며 중요 문서는 캡처합니다.
고객에게 전화를 걸어 도착 시간 창을 업데이트합니다. 이메일을 확인하고 답장을 보냅니다.
또한 현재 MC65를 사용하는 경우 대부분의 기존 MC55/MC65 액세서리와의 백워드 호환성에 따라 최신 모바일 컴퓨팅 기술로의 비용 효율적인 업그레이드가 가능합니다.
PHYSICAL CHARACTERISTICE
Dimensions : 6.38 in. L x 3.03 in. W x 1.32 in. D (162.2 mm L x 77 mm W x 33.5 mm D)
Weight : 13.5 oz./385 g (with rechargeable 3600mAh Lithium Ion battery)
Display : 3.5 in. color VGA display, touch, 640 x 480 portrait, 650+ NIT s
Standard Battery : Rechargeable Lithium Ion 3.7V, 3600 mAh battery
Backup Battery : Ni-MH battery (rechargeable) 15mAh 3.6V nominal (not user-accessible or replaceable)
Expansion Slot : Micro SD card slot (supports up to 32GB)
Communication : Interface: USB 2.0 high speed (host and client)
PERFORMANCE CHARACTERISTICS
CPU : Dual core 1GHz OMAP 4 processor
Operating System : Microsoft® Embedded Handheld 6.5 Professional
Memory : 256 MB RAM/2 GB Flash
DATA CAPTURE
Options :
2D SE4500-SR imager
2D SE4500-SR imager + 8 MP Camera
2D SE4500-DL imager + 8 MP Camera
2D SE4500-DL imager
2D SE4500-DPM/HD + 8 MP camera
Data Types : 1D/2D bar codes, photographs, video, signatures and documents
WIRELESS VOICE AND DATA COMMUNICATIONS
WAN Radio : 4G HSPA+ Frequency band: UMTS/HSDPA and HSUP A - 850, 900, 1900 and 2100 MHz; GSM/EDGE: 850, 900, 1800 and 1900 MHz
WLAN : Push-to-talk (PTT ); VoIP -ready
INTEGRATED GPS
Integrated standalone and Assisted-GPS (A-GPS): SUPL 1.0
WIRELESS PAN AND DATA COMMUNICATIONS
Bluetooth Class II , v2.1 with Enhanced Data Rate (EDR)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라PDA Zebra MC55A0-HC 2D 헬스케어PDA 의료용모바일컴퓨터 산업용PDA 바코드PDA 매뉴얼HION IT
지브라 MC55A0-HC 헬스케어 PDA는 차세대 의료 모빌리티를 위해 소독이 가능한 견고한 의료용 모바일 컴퓨터로 휴대하기 쉽고 사용하기 쉬우며 환자 모니터링이 간편한 산업용PDA입니다.
MC55A0-HC 헬스케어 바코드 PDA는 병원용으로 설계되어 있어 일상적인 낙하와 충돌을 견딜 뿐만 아니라 환자용으로 사용한 후 소독도 가능합니다. 또한 강력한 무선 애플리케이션 성능과 무선 네크워크 옵션을 통해 의료 서비스 제공자가 이동 중에 환자 기록 액세스를 통해 환자 모니터링에 집중하고, 약을 정확히 투여하며, 환자의 활력 징후를 관찰하고, 검사실과 조제실에 지시하며, 검사 결과를 열람하는 등의 일을 모두 몇 초만에 병원 내 어디에서든 할 수 있습니다.
PHYSICAL CHARACTERISTICS
Dimensions : 5.78 in. L x 3.03 in. W x 1.1 in. D (14.7 cm L x 7.7 cm W x 2.8 cm D)
Weight : 11.9 oz./338 g (including standard battery)
Display : PenTile® 3.5 in Color VGA, super bright 650+ NITS
Touch Panel : Glass analog resistive touch
Display : Backlight LED backlight
Standard Battery : Rechargeable Lithium Ion 3.7V, 3600 mAh Smart Battery
Backup Battery : Ni-MH battery (rechargeable) 18mAh 2.4V (not user accessible)
Expansion Slot : microSD slot with SDHC Support (maximum 32GB)
Comm. Interface : USB 1.1 host and client
Keypad Options : QWERTY; Numeric
Audio : VoWLAN; support for Bluetooth headsets; handset and speaker phone modes
PERFORMANCE CHARACTERISTICS
CPU : Marvell™ PXA 320 @ 806 MHz processor
Operating System : Microsoft® Windows Mobile ® 6.5 Classic
Memory : 256MB RAM; 1GB Flash
USER ENVIRONMENT
Operating Temp. : 14° F to 122° F/-10° C to 50°C
Storage Temp. : -40° F to 158° F/-40° C to 70° C
Humidity : 95% non-condensing
Drop Specification : Multiple 6 ft./1.8 m drops per MIL-STD 810G specifications
Tumble Specification : 1,000 1.6 ft./0.5 m tumbles (2,000 hits)
Sealing : IP64 per IEC sealing specifications
Clock : ntegrated real time clock
Electrostatic Discharge (ESD) : 15KV Air; 8KV Touch
BATTERY PERFORMANCE
User Profiles Minimally 8 hours based on 600 scans and WLAN transmits per hour with display on and standard capacity battery
DATA CAPTURE OPTIONS
Options 2D SE4500-DL imager; 3.2 MP auto-focus flash-enabled digital color camera; captures 1D and 2D bar codes, color photographs and video, signatures and documents
REGULATORY
Electrical Safety : Certified to UL/cUL 60950-1, IEC/EN60950-1
Environmental : RoHS-compliant
WLAN and Bluetooth (PAN) : USA: FCC Part 15.247, 15.407 Canada: RSS-210, RSS 310 EU: EN 300 328, EN 300 440-2, EN 301 893 Japan: ARIB STD-T33, ARIB STD-T66, ARIB STD-T70 & T71 Australia: AS/NZS 4268
RF Exposure : USA: FCC Part 2, FCC OET Bulletin 65 Supplement C Canada: RSS-102 EU: EN 50392 Australia: Radiocommunications Standard 2003
EMI/RFI : North America: FCC Part 15, Class B Canada: ICES 003 Class B EU: EN55022 Class B, EN 301 489-1, EN 301 489-17, EN 301 489-19, EN 60601-1-2
Laser Safety : IEC/Class 2/FDA ll in accordance with IEC60825-1 /EN 60825-1
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
지브라PDA Zebra MC18 2D 산업용PDA 퍼스널쇼퍼 바코드PDA 매뉴얼HION IT
매장 방문 고객의 쇼핑 경험을 혁신적으로 개선한 지브라 MC18 산업용 PDA 퍼스널 쇼퍼로 쇼핑을 즐길 수 있는 고객 환경을 선사하십시오.
이 스마트폰형 첨단 모바일 컴퓨터는 고객에게 실시간 연결을 지원하여 진정한 가치를 선사합니다.
안드로이드 롤리팝 및 Zebra의 Mx(Mobility Extensions) 옵션으로 소비자용 안드로이드를 진정한 엔터프라이즈급 운영체제로 전환하는 일련의 기능이 추가되었습니다.
고객의 쇼핑 경험을 혁신적으로 개선
지브라 MC18 바코드 PDA 퍼스널 쇼퍼 시리즈 무선 리테일 모바일 컴퓨터는 새로운 차원의 우수한 고객 서비스와 향상된 지원 생산성 및 효율성을 제공합니다.
Zebra MC18 산업용 PDA 다목적 장치는 직원들에게 현장에서 고객의 질문에 답하고 재고 보충에서 가격 인하까지 재고를 오류 없이 효율적으로 관리하며 계산대 대기 시간을 단축하는 데 필요한 도구를 제공하기 위한 목적으로 설계되었습니다.
O/S 선택 (안드로이드 또는 윈도우즈)
널리 사용되는 모바일 운영 체제인 Android KitKat 또는 Windows Embedded Compact 7 최신 버전 중에서 선택하십시오.
그런 다음 기존 MC18 Windows 장치를 Android로 쉽게 업데이트할 수 있습니다.
거의 모든 바코드를 즉시 캡처할 수 있습니다.
지브라의 첨단 이미징 엔진은 바코드가 용지에 인쇄되었거나, 모바일 폰 화면에 표시되거나, 손상, 긁힘 또는 인쇄 품질 저하와 상관없이 모든 1D 또는 2D 바코드를 빠르게 캡처할 수 있습니다.
또한 전방향 스캔이 가능하므로 구매 고객과 매장 직원 모두에게 포인트-앤-슛(Point-and-Shoot) 방식의 간편함을 제공합니다.
PHYSICAL CHARACTERISTICS
Dimensions : 2.95 in. H x 8.58 in. L x 3.09 in. W/ 7.50 cm H x 21.80 cm L x 7.86 cm W
Weight : 10.6 oz./300 g (with battery)
Display : Color LCD; 4.0 inch 480x800 WVGA resolution; 16 bits/pixel RGB; LE D backlight; capacitive touch screen; Corning Gorilla Glass 3
Keyboard : 1 dedicated trigger key
Power Source : PowerPrecision+ 2725 mAh Li-Ion rechargeable battery
PERFORMANCE CHARACTERISTICS
Processor : TI OMAP 4430, Dual Core, 800MHz
Operating System :
Windows Embedded Compact 7
Microsoft Internet Explorer Embedded 7
Memory : 512 MB RA M/2 GB Flash or 1 GB RA M/4 GB Flash
Interface/Communications : USB 2.0 Client for Microsoft ActiveSync for service and maintenance
Light Source : Red LED Illumination with LED dot aim pattern
Scan Rate : Imaging rate: 30 Frames per second, 1280p x 800p
Ambient Light Immunity : Tolerant to typical artificial indoor and natural outdoor (direct sunlight) lighting conditions. Fluorescent, Incandescent, Mercury Vapor, Sodium Vapor, LED: 450 Ft. Candles (4,844 Lux) Sunlight: 8,000 Ft. Candles (86,111 Lux)
WIRELESS SECURITY
Wi-Fi Security Certification : Legacy, WPA and WPA 2
Authentication : None, EAP-TTLS (CHAP, MSCHAP, MSCHAPv2, PAP , MD5), EAP-TLS, PEAP (TLS, MSCHAPv2, GTC), LEAP and EAP-FAST (TLS, MSCHAPv2, GTC)
Encryption : WEP (40 or 104 bit), TKIP and AES
USER ENVIRONMENT
Operating Temperature : 32° to 104° F/0° to 40° C
Storage Temperature : 4° to 140° F/-20° to 60° C
Humidity : 40° C (RH 10% - 95%) non-condensing
Drop Specification : Withstands multiple 4 ft./1.2 m drops to vinyl tile over concrete
Tumble Specification : 1,000 0.5 m/1.64 ft. tumbles at room temperature
WIRELESS NETWORKING
WLAN : Wi-Fi IEEE 802.11a/b/g/n
WPAN : Bluetooth Class 1.5 2.1+EDR/ Bluetooth 4.0 with Bluetooth SMART technology
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
인터맥프린터 Intermec PX4i PX6i 열전사감열 RFID 산업용 바코드프린터 매뉴얼HION IT
인터맥, EasyCoder PX (PX4i, PX6i) 시리즈 바코드프린터는 까다로운 산업환경에 맞게 설계된 견고한 금속의 고성능 프린터로, 24시간 작동을 지원합니다.
개방된 모듈식 디자인은 프린터가 쉽게 적응, 유지보수 및 서비스를 제공받을 수 있도록 합니다.
인터맥 PX 시리즈, PX4i 및 PX6i 산업용 바코드 프린터는 각각 4인치 또는 6인치의 최대 인쇄폭 기능이 특징입니다.
제조업 환경에서의 간편한 통합을 위해 설계된 PX 시리즈 산업용 프린터는 사실상 어떠한 위치라도 장착할 수 있습니다.
다기능성 폼 팩터가 라벨 자동부착기 같은 주변장치와의 연결을 용이하게 합니다.
인터맥 EasyCoder PX 시리즈 프린터는 사용자 정의 프로그램을 실행, 독립적으로 작동할 수 있어서 PC가 필요하지 않습니다.
최대 7개의 유선 및 무선 연결 인터페이스를 통해 스캐너, 스케일, 기타 프린터 및 컨베이어를 포함한 생산라인 기계장치에서 작동할 수 있을 뿐만 아니라 네트워크 호스트에서 정보에 직접 액세스할 수 있습니다.
최대의 성능 및 인쇄품질- 분당 최대 115개까지 6인치 길이의 컴플라이언스 라벨 인쇄
견고한 금속 구조로 열악한 산업환경에서도 24시간 / 7일 인쇄제공
변화하는 호스팅 환경 및 응요운야에 쉽게 적응
자동화된 라벨 부착 응용분야의 통합을 위한 모듈화 디자인
PC 비용을 들이지 않는 독립형 프린터 응용지원
IPL 또는 Fingerprinter/DP 프린터 명령 언어 선택
203, 300 또는 400 dpi 인쇄 해상도의 선택 사항을 제공하는 교체 가능한 프린트 헤드
PHYSICAL CHARACTERISTICS
LxHxW : 482 x 238 x 275 mm (19.0 x 9.4 x 10.8 in)
Weight : 12.85 kg (28.4 lbs)
PRINT SPECIFICATIONS
Max. Print Width : 112 (DT)/110 (TT) mm (4.4/4.3 in)
Max. Length :
4095 mm (161 in) at 203 dpi
2775 mm (109 in) at 300 dpi
1016 mm (40 in) at 406 dpi
RFID STANDARD & FREQUENCIES
Supports ISO 18000-6B and 18000-6C / EPC
Generation 2
865-928 MHz radio configured to comply with local UHF RFID regulations including FCC and ETSI.
Contact local representative for availability in particular region.
PRINT SPEED
100 - 300 mm/s (4 - 12 ips) for 203/300dpi
100 - 250 mm/s (4 - 10 ips) for 406 dpi
MEDIA
Labels & Tags :
Max/Min Width : 120/ 25.4mm (4.72/ 1 in)
Thickness : 2.4 to 10.0 mil
Configuration : Roll-fed or fanfold
Sensing : Gap, notch, black mark, continuous
Label Roll Max Diameter : 213 mm (8.38 in)
Label Roll Core : 38-76mm (1.5-3 in)
Ribbons :
Roll Max Diameter : 80 mm (3.15in), approx. 450m
Core ID : 25.4 mm (1”)
Type : Wax, mid-range, resin
INTERFACE
Standard :
Ethernet 10/100 Mbps
RS-232, up to 115.2 kB/s
Supported Serial Protocols :
Fingerprint/Direct Protocol : XON/ XOFF, ENQ/ACK, DTR, RTS/CTS
IPL: XON/XOFF, Intermec Std. Protocol
USB 2.0
Optional :
Parallel IEEE 1284
Industrial Interface (8 digital in/out, 4 analog relays, 1 RS232/422/485 port)
Dual Serial ports RS-232, RS-422, RS-485 and 20mA Current Loop, Applicator Interface
Wireless :
IEEE 802.11 b/g
Wi-Fi Certified, Cisco® Compatible (CCX) version 3 Certified
WEP, WPA, WPA2, 802.11x (EAPTTLS, LEAP, PEAP, FAST), 802.11i
Multiple industrial antenna options for maximized coverage
Supported Protocols : TCP/IP-suite (TCP, UDP, ICMP, IGMP, etc.), LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP.SNMP-MIB II supported (over UDP/IP), private enterprise MIB included. Supports IPv4 and IPv6
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
인터맥프린터 Intermec PM4i 열전사감열 RFID 바코드프린터 산업용프린터 매뉴얼HION IT
다기능 PM4i는 최신 RFID 기술과 함께 Intermec의 바코드프린터에서 사용자들이 기대해왔던 신뢰성 및 견고성과 함께 뛰어난 성능을 제공합니다.
기업들은 PM4i를 통해 RFID 어플리케이션을 구동시켜 RFID 스마트 라벨을 생성기킬 수 있습니다.
PM4i는 가변 주파수 RFID Tag 를 사용함으로써 전세계에서 사용할 수 있는 라벨 인코딩과 인쇄를 동시에 할 수 있으며, 이를 통해 지역 표준에 따라 달라지는 여러 주파수 Tag 를 읽을 수 있습니다.
PM4i 는 완벽한 프린터 독립성 어플리케이션에 대한 사용자 정의 프로그램을 실행하는 "스마트 클라이언트"의 역할도 할 수 있습니다.
PM4i 프린터는 PC 필요없이 추가적인 하드웨어(예, 스캐너, 다른 프린터, 컨베이어)를 작동시킬 수 있고, 네트워크 호스트로부터 정보에 접근할 수 있으며, 기능 추가를 위한 어플리케이션으로도 변경시킬 수 있습니다.
통합 EasyLAN 이더넷, USB, 직렬 연결은 PM4i와의 기본 인터페이스 입니다.
사용자는 추가적인 EasyLAN 무선 및 산업용 인터페이스 보드를 선택할 수 있습니다.
EasyLAN 무선 인터페이스는 통합 표준 802.11b 무선 통신을 사용합니다.
네트워크를 통해 이 무선 통신은 중계된 정보의 128-bit WEP 암호화를 제공합니다.
Intermec의 유선 및 무선 기술은 보안 인쇄와 모든 환경에 대한 네트워크 인프라를 보장합니다.
PM4i 바코드프린터는 공급망 전체에 걸쳐 신속하고 정확한 데이터 수집을 위해 모든 물품들이 RFID를 통해 라벨이 주어지고, 추적된다는 것을 보장하며, 제조업, 창고업 및 물류업 용도에 적합하도록 설계되었습니다.
향후 RFID 표준으로서의 UHF Gen 2를 지원
향후 RFID 표준 발전을 지원하기위한 고유 제품기능으로 고객 투자보호
주파수 가변 UHF Tag를 인코딩하는 최초의 RFID 프린터
바코드, 판독 가능한 택스트, 그래픽을 동시인쇄
독립형 프린터 어플리케이션 지원
통합 EastLAN 이더넷, USB, 직렬 인터페이스 표준
EasyLAN 무선 인터페이스(옵션)
DESCRIPTION
Direct thermal and thermal transfer label, ticket and tag printer. Also available with RFID.
PHYSICAL CHARACTERISTICS
LxHxW : 543 x 261 x 298mm (21.38 x10.28 x 11.73 in)
Weight : 13.5 kg (29.76 lbs.)
PRINT SPECIFICATIONS
Max. Width : 104 mm (4.09 in) at 203 dpi and 406dpi; 105.7 mm (4.16 in) at 300 dpi.
Max. Length : 4095 mm (161.2 in) at 203 dpi; 2730 mm (107.5 in) at 300 dpi. 1016 mm (40 in) at 406 dpi.
RFID STANDARD & FREQUENCIES
Supports ISO 18000-6B and 18000-6C / EPC Class 1 Generation 2, 865-928 MHz radio configured to comply with local UHF FID regulations including FCC and ETSI. Contact local representative for availability in particular regions.
PRINT SPEED
100 - 200 mm/s (4 - 8 ips) variable (203 dpi)
100 - 150 mm/s (4 - 6 ips) variable (300/406 dpi)
PRINT RESOLUTION
8 dots/mm (203 dpi)
11.8 dots/mm (300 dpi)
16 dots/mm (406 dpi)
MEDIA
Type : Labels and Tags
Max/Min Width : 114.3 /25.4 mm (4.5 /1 in)
Thickness : 2.5 to 8.7 mil
Configuration : Roll-fed or fanfold
Sensing : Gap, notch, black mark, continuous
Label Roll Max Diamete r: 213 mm (8.38 in)
Label Roll Core : 38-76mm (1.5-3 in)
Type : Ribbons
Roll Max Diameter : 82 mm (3.2 in), approx. 450m
Core ID : 25.4 mm (1 in)
Type : Wax, mid-range, resin
MEMORY
Standard : 16MB Flash memory, 32MB SDRAM, 1 Compact Flash slot
Available : 1GB CompactFlash memory, multi-GB USB memory device (FAT16/FAT32 USB drivers supported)
POWER SUPPLY
AC Voltage : 90 to 265 VAC, 45 to 65Hz
PFC Regulation : IEC 61000-3-2
Power Consumption : Standby 15W; Peak 300W
OPERATING ENVIRONMENT
Ambient Operating Temperature : +5°C to +40°C (+41°F to +104°F)
Storage Temperature : -20°C to +70°C (-4°F to +152°F)
Humidity : 20 to 80% non-condensing
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
인터맥프린터 Intermec PF2i PF4i 열전사감열 바코드프린터 산업용프린터 매뉴얼HION IT
컴팩트한 PF2i, PF4i 미드 레인지 바코드프린터는 인터맥의 스마트하고 강하고 안전한 산업용 프린터 제품입니다.
Intermec SmartSystems ™ 및 Wavelink Avalanche ™를 통해 PF2i의 통합 장치관리 및 진단 기능은 가동 중단 시간을 줄이고 설치를 단순화합니다
견고한 All-Metal PF2i 바코드프린터는 다운 타임을 줄이고 유지 보수 비용을 최소화하는 기능을 통합합니다.
작은 크기에도 불구하고 PF2i는 풀 사이즈 라벨 롤 (최대 8.4 in / 213 mm)을 사용하여 용지 교체 횟수를 줄입니다.
QuickMount ™ 프린트 헤드 디자인 덕분에 프린트 헤드를 빠르고 쉽게 교체 할 수 있습니다.
최고 수준의 보안 무선 연결 (WPA2)을 포함한 여러 보안 인터페이스 옵션을 사용할 수 있습니다.
업계 유일의 프린터인 WiFi- 및 CCX-Certification과 함께 사용할 수있는 인터맥 산업용 프린터는 무선 네트워크 무결성을 유지하고 구성 시간을 단축시킵니다.
모든 프린터는 이더넷 연결 및 출현하는 네트워크 프로토콜 IPv6과 함께 제공되므로 장기간의 엔터프라이즈 확장성을 보장합니다.
기타 연결 옵션 - 표준 RS232 및 USB 포트, 옵션 병렬, 이중 직렬 또는 산업용 인터페이스는 통합 유연성을 추가로 제공합니다.
Strong, all-metal construction and superior throughput for harsh industrial environments
Compact size fits space- constrained applications
Smart Printing capabilities support stand-alone printer applications, eliminating PC expense and complexity
All-in-one, user-selectable printer languages Fingerprint/Direct Protocol (DP), IPL, ZSim and DSim in every printer
Secure wireless connectivity : CCX and WiFi® certified with WPA2
Integrated Ethernet, USB host and device, and serial interface standard
Internet Protocol v6 (IPv6) support
PHYSICAL CHARACTERISTICS
Length : 397 mm (15.6 in)
Height : 178 mm (7 in)
Height (big top) : 205 mm (8.1 in)
Width : 194 mm (7.6 in)
Weight : 5.5 kg (12 lbs.)
PRINT SPECIFICATIONS
Max. Width: 56 mm (2.2 in)
Max. Length: 4095 mm (161.2 in)
Print Speed : 100 ? 200 mm/s (4 - 8 ips) variable
Print Resolution : 8 dots/mm (203 dpi)
MEDIA
Type : Labels & Tags
Max/ Min Width : 60/25.4 mm (2.36/1 in)
Thickness : 3.0 to 7.5 mil
Configuration : Roll-fed or fanfold
Sensing : Gap, notch, black mark, continuous
Label Roll Max Diameter (long door): 152.4 mm (6 in)
Label Roll Max Diameter (short door): 213 mm (8.38 in)
Label Roll Core: 38-76mm (1.5-3 in)
Type : Ribbons
Roll Max Diameter : 65 mm (2.56 in), approx. 225m
Core ID : 25.4 mm (1”)
Type : Wax, mid-range, resin
INTERFACE
Standard :
Ethernet 10/100 Mbps
RS-232, up to 115.2 kB/s
Supported Serial Protocols :
Fingerprint/Direct Protocol : XON/XOFF, ENQ/ACK, DTR, RTS/CTS
IPL: XON/XOFF, Intermec Std. Protocol
USB 2.0
Optional :
Parallel IEEE 1284
Industrial Interface (8 digital in/out, 4 analog relays, 1 RS232/422/485 port)
Dual Serial ports RS-232, RS-422, RS-485 and 20mA Current Loop
Wireless:
IEEE 802.11 b/g
Wi-Fi Certified, CCX (Cisco®) version 3 Certified
WEP, WPA, WPA2, 802.11x (EAP- TTLS, LEAP, PEAP, FAST), 802.11i
Multiple industrial antenna options for maximized coverage
Supported Protocols :
TCP/IP-suite (TCP, UDP, ICMP, IGMP, etc.), LPR/LPD, FTP, BOOTP, DHCP, HTTP, SNMPv3, SMTP.SNMP-MIB II supported (over UDP/IP), private enterprise MIB included Supports IPv4 and IPv6
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
인터맥프린터 INTERMEC PD43 PD43c 2D 열전사 산업용 바코드프린터 매뉴얼HION IT
경공업 (Light Industrial) 산업에 적합한 열전사 인쇄타입의 PD43, PD43c 바코드 프린터는 설치공간이 협소한 얕은 조리대 및 인출 타입의 캐비넷 공간에서의 설치사용이 용이한 혁신적인 인쇄 성능을 제공합니다.
인터맥 PD43, PD43c 바코드 프린터 물류센터 및 배송센터, 물류창고, 항공기내 승객서비스 등에 적합하며, 외형은 금속재질, 강력한 캐스트알루미늄 인쇄 메커니즘, 프린터 헤드 및 롤러 교체시 도구 필요없어 다운타임을 최소화 하도록 설계되었습니다.
Intermec PD43은 호스트 컴퓨터가 없어도 설정을 쉽게 구성, 구성 및 미세 조정할 수있는 컬러 그래픽 디스플레이를 제공합니다.
실제로 스마트 인쇄 기능을 통해 PD43 은 프린터 내부에서 바로 응용 프로그램을 실행할 수 있으므로 연결된 PC가 필요하지 않습니다.
Incredibly Compact: Small footprint for installation into compact tabletops and pull-out cabinets.
Built Strong: Rugged metal chassis and print mechanism provide investment protection.
Easy to Use: Intuitive, ten-language color display or icon interface simplifies setup and maintenance.
uilt-In Command Languages: Fast, friendly and complete printer emulation-including ZSim2, our most comprehensive ZPL-II® emulation ever-makes upgrading from other printer brands easy.
Smart Printer: Run apps right inside the printer, control peripherals, and eliminate the need for a connected PC, using either C# for Printers or Fingerprint.
Maintenance Made Easy: Completely tool-free printhead and platen roller replacement.
Broad Media Compatibility: Supports half- and one-inch ribbon cores, ink-in or ink-out.
Co-Engineered Media: Extensively tested with Intermec co-engineered media products, ensuring optimized performance. Compatible with Honeywell's broad range of media products.
Available Accessories: Customize with a wide range of available accessories such as a Wi-Fi/Bluetooth® module and cutter.
PHYSICAL CHARACTERISTICS
Length ;
PD43 with Standard Door : 470 mm (18.5 in)
PD43 with Flat Top Door : 470 mm (18.5 in)
PD43c : 236 mm (9.3 in)
PD43c with Optional External Media Holder : 432 mm (17.0 in)
Width ;
PD43 with Standard Door : 211 mm (8.3 in)
PD43 with Flat Top Door : 211 mm (8.3 in)
PD43c : 211 mm (8.3 in)
PD43c with Optional External Media Holder : 211 mm (8.3 in)
Height ;
PD43 with Standard Door : 249 mm (9.8 in)
PD43 with Flat Top Door : 209 mm (8.2 in)
PD43c : 205 mm (8.1 in)
PD43c with Optional External Media Holder : 217 mm (8.5 in)
Weight ;
PD43 with Standard Door : 8.4 kg (18.5 lbs)
PD43 with Flat Top Door : 8.3 kg (18.3 lbs)
PD43c : 5.1 kg (11.2 lbs)
PD43c with Optional External Media Holder : 6.0 kg (13.2 lbs)
PRINT SPECIFICATIONS
Max Print Width : 104 mm (4.1 in)
Print Speed : 203 mm/s (8.0 ips) @ 8.0 dpmm (203 dpi), 152 mm/s (6.0 ips) @ 11.8 dpmm (300 dpi)
Resolution : 8.0 dpmm (203 dpi), 11.8 dpmm (300 dpi)
Media Compatibility
Max. Media Diameter (OD) ;
PD43 with Standard Door : 213 mm (8.375 in)
PD43 with Flat Top Door : 152 mm (6.0 in)
PD43c with External Media Holder : 203 mm (8.0 in)
Media Core Sizes (ID) : 1, 1.5, 3 in
Media Width : 19 mm (0.75 in) to 118 mm (4.65 in)
Label Length : 6.4 mm (0.25 in) to 172.7 cm (68.0 in)
>하이온아이티
주소 : 서울 금천구 가산디지털2로 165, 1304호 (백상스타타워2차)
대표번호 : 02-2038-0018 / 이메일 : hion@hionit.com
홈페이지 : http://hionsmart.com
Pushing the limits of ePRTC: 100ns holdover for 100 daysAdtran
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?Speck&Tech
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slackshyamraj55
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
Essentials of Automations: The Art of Triggers and Actions in FMESafe Software
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
Communications Mining Series - Zero to Hero - Session 1DianaGray10
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
20 Comprehensive Checklist of Designing and Developing a WebsitePixlogix Infotech
Dive into the world of Website Designing and Developing with Pixlogix! Looking to create a stunning online presence? Look no further! Our comprehensive checklist covers everything you need to know to craft a website that stands out. From user-friendly design to seamless functionality, we've got you covered. Don't miss out on this invaluable resource! Check out our checklist now at Pixlogix and start your journey towards a captivating online presence today.
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...Neo4j
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
A tale of scale & speed: How the US Navy is enabling software delivery from l...sonjaschweigert1
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AIVladimir Iglovikov, Ph.D.
Presented by Vladimir Iglovikov:
- https://www.linkedin.com/in/iglovikov/
- https://x.com/viglovikov
- https://www.instagram.com/ternaus/
This presentation delves into the journey of Albumentations.ai, a highly successful open-source library for data augmentation.
Created out of a necessity for superior performance in Kaggle competitions, Albumentations has grown to become a widely used tool among data scientists and machine learning practitioners.
This case study covers various aspects, including:
People: The contributors and community that have supported Albumentations.
Metrics: The success indicators such as downloads, daily active users, GitHub stars, and financial contributions.
Challenges: The hurdles in monetizing open-source projects and measuring user engagement.
Development Practices: Best practices for creating, maintaining, and scaling open-source libraries, including code hygiene, CI/CD, and fast iteration.
Community Building: Strategies for making adoption easy, iterating quickly, and fostering a vibrant, engaged community.
Marketing: Both online and offline marketing tactics, focusing on real, impactful interactions and collaborations.
Mental Health: Maintaining balance and not feeling pressured by user demands.
Key insights include the importance of automation, making the adoption process seamless, and leveraging offline interactions for marketing. The presentation also emphasizes the need for continuous small improvements and building a friendly, inclusive community that contributes to the project's growth.
Vladimir Iglovikov brings his extensive experience as a Kaggle Grandmaster, ex-Staff ML Engineer at Lyft, sharing valuable lessons and practical advice for anyone looking to enhance the adoption of their open-source projects.
Explore more about Albumentations and join the community at:
GitHub: https://github.com/albumentations-team/albumentations
Website: https://albumentations.ai/
LinkedIn: https://www.linkedin.com/company/100504475
Twitter: https://x.com/albumentations
How to Get CNIC Information System with Paksim Ga.pptxdanishmna97
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
2. 2
iMZ Series User Guide
continued
Table of Contents
Proprietary Statements.............................................................................................4
Document Conventions............................................................................................6
Introduction to the iMZ Series................................................................................7
Unpacking and Inspection................................................................ 7
Reporting Damage............................................................................ 7
Getting Ready to Print...............................................................................................9
Battery................................................................................................ 9
Installing and Removing the Battery.............................................................9
iMZ Series Quad Power Station..................................................................13
Battery Safety...............................................................................................14
Charger Safety..............................................................................................14
Loading the Media (All models)..................................................... 15
Using Pre-Printed Receipt Media................................................... 16
Operator Controls........................................................................... 18
Normal Boot-up LED Behavior....................................................................20
Diagnostic (Two key) Report LED Behavior................................................20
Forced Download Description and LED Behavior......................................21
Rebooting After a Firmware Download or Forced Firmware Download
(Description and LED Behavior)..................................................................22
Shutting Down LED Sequence....................................................................22
Communication (Blue) LED Behavior..........................................................22
Verify the Printer Is Working..........................................................23
Printing a Configuration Label.....................................................................23
Cable Communication..................................................................................24
Wireless Communications with Bluetooth®.............................................................
26
Bluetooth®
Personal Area Network (PAN)...................................................26
Bluetooth®
Connections..............................................................................26
Bluetooth pairing requiring Man-In-The-Middle (MITM) protection..........27
Connecting to Apple Devices......................................................................28
WLAN Overview..............................................................................29
Setting Up the Software.................................................................29
Wearing the Printer..................................................................................................30
Belt Clip.........................................................................................................30
Adjustable Shoulder Strap...........................................................................31
Preventive Maintenance........................................................................................32
Extending Battery Life....................................................................32
General Cleaning Instructions........................................................33
Troubleshooting.......................................................................................................35
Interpreting Indicators....................................................................35
Troubleshooting Topics..................................................................35
Resetting an iMZ Series Printer.....................................................37
Information On Back Of Printer......................................................37
Troubleshooting Tests....................................................................38
Printing a Configuration Label.....................................................................38
Communications Diagnostics......................................................................38
Calling Technical Support............................................................................39
Specifications.............................................................................................................42
Printing Specifications ................................................................................42
3. 3
iMZ Series User Guide
Memory and Communications Specifications, iMZ series.........................42
Media Specifications....................................................................................42
ZPL Bar Code Specifications and Commands............................................43
CPCL and ZPL Font Specifications ............................................................44
Fonts..........................................................................................................44
Matrix (in dots) (HxW)...............................................................................44
Min. Char. Size (HxW)...............................................................................44
Max. CPI.....................................................................................................44
Font............................................................................................................45
Matrix (in dots) (HxW)...............................................................................45
Type*.........................................................................................................45
Min. Char. Size (HxW)...............................................................................45
Maz. C.P.I....................................................................................................45
USB Communications Port..........................................................................46
Pin#...........................................................................................................46
Signal Name..............................................................................................46
Type...........................................................................................................46
Description................................................................................................46
Physical, Environmental and Electrical Specifications...............................46
iMZ Series Accessories ...............................................................................48
Appendix A.................................................................................................................49
Interface Cables............................................................................................49
USB Cable.....................................................................................................49
More Interface Cables .................................................................................49
Appendix B.................................................................................................................50
Media Supplies.............................................................................................50
iMZ Series Media.........................................................................................50
Appendix C.................................................................................................................51
Battery Disposal...........................................................................................51
Product Disposal..........................................................................................51
Appendix D.................................................................................................................52
Product Support...........................................................................................52
Product Support Contacts...........................................................................53
Appendix E..................................................................................................................54
Using zebra.com..........................................................................................54
Index..............................................................................................................................56
Patent Numbers........................................................................................................57
6. 6
iMZ Series User Guide
Document Conventions
The following conventions are used throughout this docu-
ment to convey certain information:
If you are viewing this guide online, click the underlined text
to jump to a related Web site. Click on italic text (not under-
lined) to jump to that location in this manual.
Cautions, Important, and Note
Caution • Warns you of the potential for electrostatic discharge.
Caution • Warns you of a potential electric shock situation.
Caution • Warns you of a situation where excessive heat could cause
a burn
Caution • Advises you that failure to take or avoid a specific action
could result in physical harm to you.
Caution • Advises you that failure to take or avoid a specific action
could result in physical harm to the hardware.
Important • Advises you of information that is essential to complete a
task.
Note • Indicates neutral or positive information that emphasizes or
supplements important points of the main text.
7. 7
iMZ Series User Guide
Introduction to the iMZ Series
Thank you for choosing our Zebra®
iMZ™ Series Mobile
Printers. These rugged printers will surely become productive
and efficient additions to your workplace thanks to their inno-
vative design. Zebra Technologies is the leader in industrial
printers with world-class support for all of your bar code print-
ers, software, and supplies.
This user’s guide gives you the information you will need
to operate the iMZ320 and iMZ220 printers. These printers
use CPCL and ZPL programming languages. To create and
print labels using the CPCL and ZPL languages, refer to the
Mobile Printing Systems CPCL Programming Manual and ZPL
Programming Guide (See Appendix G for instructions on how
to access manuals.)
iMZ Series Software Utilities:
• Zebra Net Bridge™ : printer configuration, fleet management
• Zebra Setup Utility: single printer configuration, quick setup
• Zebra Designer Pro: label design
• Zebra Designer Drivers: Windows®
driver
• OPOS Driver: Windows driver
• Multiplatform SDK
• Zebra Downloader
(These utilities can be found on the product CD that comes
with the printer and at www.zebra.com . See Appendix F.)
Unpacking and Inspection
• Check all exterior surfaces for damage.
• Open the media cover (refer to “Loading the Media” in
the Getting Ready to Print section) and inspect the media
compartment for damage.
In case shipping is required, save the carton and all packing
material.
Reporting Damage
If you discover shipping damage:
• Immediately notify and file a damage report with the ship-
ping company. Zebra Technologies Corporation is not re-
sponsible for any damage incurred during shipment of the
printer and will not cover the repair of this damage under
its warranty policy.
• Keep the carton and all packing material for inspection.
• Notify your authorized Zebra re-seller.
8. 8
iMZ Series User Guide
Note: Tapping the Zebra Print TouchTM
icon with a Near Field
Communication (NFC) enabled smartphone will provide instant
access to printer-specific information. For more information about
NFC and Zebra products, go to http://www.zebra.com/nfc. Bluetooth
pairing applications via NFC is also possible. Please see Zebra Multi-
platform SDK for more information.
http:www.zebra.com/nfc
www.zebra.com/imz-info
1
2
3
4
5
6
7
8
9
10
1. Feed Switch
2. Media Status Light
3. USB Port
4. Battery Charging Receptacle
5. Media/Black Bar Sensor
6. Media Cover
7. Platen
8. Printhead
9. Latch Release Button
10. Communications Status
Indicator
11. Charge Status Indicator
12. Power Switch
13. Power Indicator
14. Belt Clip
15. Battery Door Latch
16. Battery Compartment Cover
17. Battery Pack
18. External Charge Contacts
Figure 1: iMZ Series Overview (iMZ220 Illustrated)
14
1718 16
11
12
13
15
9. 9
iMZ Series User Guide
Getting Ready to Print
Battery
Installing and Removing the Battery
Important • Batteries are shipped partially charged. Remove any
protective packaging from new battery packs prior to use.
www.zebra.co
m/imz-info
www.zebra.com/imz-info
www.zebra.com/imz-info
Figure 2.1: Installing the Battery
1. Use a coin to rotate the
Battery Compartment
lock 1
/4 turn as shown.
2. Remove the Battery
Compartment Cover
3. Plug the Battery
Packconnectorintothe
Printer.
Battery Pack
Notelocationoflabel
4. Re-install the Battery Compartment Cover and
rotate the lock back 1
/4 turn to lock it in place .
Ensure the battery leads are not pinched prior to replacing the
battery cover.
Note: Scanning the QR code with a smartphone will provide printer-
specific information at www.zebra.com/imz-info.
10. 10
iMZ Series User Guide
www.zebra.com
/imz-info
Figure 2.2: Removing the Battery
1. Use a coin to rotate the
Battery Compartment
lock1
/4 turnasshown.
2. Remove the Battery
Compartment Cover
Battery Pack
Connector
Squeeze lock to release
before unplugging con-
nector.
3. Lift Battery
pack free from
the printer.
4. Install a replacement battery by following the procedure described in Figure 2.1
Always release the locking barb before unplugging the battery
connector. Do not attempt to remove the connector by force, or by
using pliers, etc. as this could cause damage to the printer’s CPU
assembly.
11. 11
iMZ Series User Guide
When the battery is first installed, the printer power and
charge indicators should indicate the battery is not fully
charged (see “Charging the Battery” below and “Operator
Controls”).
You must charge the battery fully before using the printer for the first
time.
Charging the Battery
Preparing the Charger Power Supply
Before charging the battery for the first time, you must pre-
pare the Charger Power Supply. Refer to Figure 3 below:
Figure 3: Preparing the Charger Power Supply
continued
1.Removethepowersup-
ply from its box. Remove
anddiscardtheshipping
ringfromthemainsrecep-
tacle cavity.
Shipping Ring
Remove and discard
2. Verify that the mains adapter
shippedwithyourPrinteristhecorrect
one for your region.
Mains Adapter
3.Installthemainsadapterinto
the Power Supply by hooking
the top edge into the mains
receptaclecavity,androtating
it until it snaps into place.
US/Japan-100-110 VAC
China-220 VACUK -230 VAC
Euro/Brazil
-230 VAC
Aust-240 VAC
12. 12
iMZ Series User Guide
Charging the battery
Refer to Figure 4.
1. Plug the Charger Power Supply into the appropriate A.C.
wall receptacle. Then insert the charge cable into the
printer’s charger jack.
2. The printer’s charger indicator will indicate the status of
the charger as follows:
• An Amber light indicates the battery is charging, and that
the battery is less than 90% charged.
• A Green light indicates the battery is fully charged. The
battery is ready for use.
Approximate Charge Times :
Batteries are fully charged after 3.5 hours from the low-bat-
tery shut-off state. Partially discharged batteries will take less
time to charge.
NOTES: Use of the printer while charging will increase charge times.
Charge times are for completely discharged batteries.
As a safety feature the battery will stop charging after 4.5
hours regardless of the battery’s charge state.
www.zebra.com/imz-info
Charger Jack
12 VDC
Figure 4: Charging the Battery
iMZ Series Charger Power Supply p/n AT17947-TAB
110-240 VAC 50-60 Hz 0.6A Input; 12 VDC 1.25 A output
Plug into AC receptacle
13. 13
iMZ Series User Guide
iMZ Series Quad Power Station
The iMZ series Quad Power Station is designed to dock and
charge up to four iMZ series printers of either type simultane-
ously.
1. Ensure that the Power Station has been installed properly
per its instruction manual. Ensure that the power supply
is properly connected and its power indicator light is on.
2. Slide a printer into any one of the four docking bays as
shown in Figure 5.
NOTES: If you are using a shoulder strap, ensure it is pulled away
from the printer when installing in the Power Station.
Do not use the printer when it is installled in the Power
Station
The printer’s charge status indicator will turn amber if the
printer is properly inserted and the battery is less than
90% charged.
The printer’s charge indicators will allow you to monitor the
Figure 5: iMZ Series Quad Power Station
Green (Power)
Indicator
SlidePrinterintodockingbay
iMZ220 Printer
iMZ320 Printer
Amber/Green (Charge)
Indicator
14. 14
iMZ Series User Guide
charging process. Refer to the Controls section of this manual
for more information.
Battery Safety
Caution • Avoid accidental short circuiting of any battery. Allowing
battery terminals to contact conductive material will create a short
circuit which could cause burns and other injuries or could start a
fire.
Important • Always dispose of used batteries properly. Refer to
Appendix D for more battery recycling information.
Caution • Use of any charger not approved specifically by Zebra for
use with its batteries could cause damage to the battery pack or the
printer and will void the warranty.
Read carefully and always observe the safety guidelines for Li-Ion
batteries provided with each Battery Pack.
Charger Safety
Do not place the Power Station in locations where liquids or metallic
objects may be dropped into the charging bays.
Use care when installing either the Charger Power Supply shipped
with the printer or the power supply supplied with the iMZ series
Power Station. Do not block the ventilating slots on the top and
bottom covers of either power supply.
Ensure that the Charger Power Supply is plugged into a power
source which will not accidently be turned off if you will be charging
batteries overnight.
15. 15
iMZ Series User Guide
Loading the Media (All models)
1. Open the printer: Refer to Figure 6.
• Press the latch release button on the top of the printer as
shown at “1” below. The media cover will flip open auto-
matically revealing the media compartment.
2. Load the media: Refer to Figure 8
• Insert the roll of media into the media compartment.
Ensure that the media pulls off the core in the direction
shown in Figure 8.
3. Close the Media Cover: Refer to Figure 9.
• Pull a short length of media out of the printer
• Close the Media Cover firmly and ensure it is securely
latched on both sides..
• Turn on the printer and press the Feed button.
The printer will advance media until the Feed button is re-
leased. Verify the media is feeding properly and without
binding or skewing sideways.
Figure 6: Opening the iMZ Printer (IMZ220 shown)
continued
Media Compartment
Latch Release
Button
16. 16
iMZ Series User Guide
Figure 7: Media Black Bar Dimensions
Using Pre-Printed Receipt Media
iMZ series printers support alignment of pre-printed receipts
by using the out of paper sensor located near the printhead.
Please be aware of the following factors:
1) Note the black bar location and dimensions as detailed
below and in the Specifications section of this manual.
2) Complete information on using pre-printed media
can be found in the FORM command topic in the CPCL
Programming Manual. The CPCL manual is available
on the iMZ Product CD or on the Zebra Web site at
http://www.zebra.com/manuals.
0.19 - 0.24 in.
(3,0 - 6,0 mm)
0.59 in.
(15 mm)
3 inch media
(76.2 mm)
0.19 - 0.24 in.
(3,0 - 6,0 mm)
0.59 in.
(15 mm)
3 inch media
(76.2 mm)
17. 17
iMZ Series User Guide
Figure 8: Installing Media
Media Roll
Notedirectionmedia
pulls off the roll.
Media Cover
Pullashortlengthofmedia
out of the Printer
Figure 9: Closing the Media Cover
Ensurebothsidesofthemedia
cover are securely latched
when closed.
18. 18
iMZ Series User Guide
Operator Controls
iMZ series printer controls are detailed below and in Figure
10.
The printer has two control buttons and four multipurpose
indicators.
The Power Button turns the printer on and off.
The Feed Button advances a length of media until it is re-
leased.
The Green/Amber indicator to the left of the Power Button
indicates the status of the printer’s built-in charger:
• If the indicator is off the battery is not being charged.
• If the indicator is Amber the battery is being charged.
• If the indicator is Green, the battery is fully charged.
The Green Indicator between the Power and Feed buttons
has two states:
• A rapidly blinking light indicates a low battery condition.
• A steadily lit indicator means that power is on and the
battery charge level is sufficient for use
The Amber Indicator to the right of the Feed button is an er-
ror indicator.
• An un-lit indicator means there is no error condition and
the printer can be used.
• A blinking indicator could mean one of two conditions ex-
ist, which will inhibit printer operation:
1. There is no media loaded.
2. The media cover is open.
3. If both the above conditions are met and the error
light is still flashing, there could be no application load-
ed in the printer, or the application could have become
corrupted.
The Blue Indicator just above the product I.D. label is a com-
munications indicator. Its functions vary depending on the
wireless communications option installed in the printer.
• If the printer has a Bluetooth®
radio option:
1. A solid blue LED indicates the printer has paired with
another Bluetooth device.
2. A fast blinking LED indicates that the printer is receiv-
ing data via Bluetooth communications.
3. Blue LED is off until communication is established.
19. 19
iMZ Series User Guide
• If the printer has an 802.11n radio installed:
1. A slow blinking blue light indicates the printer is
searching for a wireless Local Area Network (WLAN).
2. A solid blue light indicates the printer has established
communication with a WLAN.
3. A fast blinking light indicates that a data transmission
is taking place.
iMZ220
Figure 10: Printer Controls
Power Button
PressuntilPowerLightturnson,then
release. Press again to turn unit off. Feed Button
Press to advance the media. Re-
lease to stop.
Communication Light (Blue)
WLAN: 1) Slow blink = searching for AP; 2) Solid blue = com-
munication with AP established; 3) Fast blink = data transmis-
sion in progress.
Bluetooth: 1) LED off until communication with other BT de-
vice is established; 2) Once paired, LED is solid blue; Fast blink
= data transmission in progress.
Charge Light
(Green/Amber)
Greenindicatesafullycharged
battery. Amber indicates
the battery is less than 90%
charged.
Media Status Light
(Amber)
When off indicates normal op-
eration.Blinking indicates either
no media or that the media
compartment is open.
Power Light (Green)
Indicatespowerstatusandbatterycondition.
A steadily lit indicator means the battery has
morethana30%chargeremaining.Ablinking
indicator means the battery has less than a
30% charge remaining.
20. 20
iMZ Series User Guide
Normal Boot-up LED Behavior
1. Press Power (on/off) button for 1.5 seconds until Green
power LED becomes solid.
2. When Power button is released within 1 second, the
Green power LED starts blinking to indicate start of pow-
er-up sequence.
3. Once 1/3 of the total boot-up time has elapsed (approx.
4-5 seconds), the Amber media status LED becomes sol-
id, and the Green power LED continues blinking.
4. Once 2/3 of the total boot-up time has elapsed (approx.
8-10 seconds), the Blue communication LED becomes
solid, the media status LED continues to be solid Amber,
and the Green power LED continues blinking.
5. When the boot-up sequence is successfully complet-
ed, the power LED turns solid Green, the media status
(Amber) and communication (Blue) LEDs turn off.
Note: If continue to hold down the power button without releasing,
the LED will remain illuminated solid green until the power button is
released and the printer will not power on. Only when power button
is pressed for 1.5 seconds and released before 2.5 seconds the printer
will proceed to the power up sequence. This behavior was design to
avoid accidentally power up the printer when the power button is
pressed against an object for long periods of time when carrying the
printer in a bag.
Diagnostic (Two key) Report LED Behavior
1. Press Feed and Power buttons (see Fig. 10) simultane-
ously to activate printing of two key report.
2. Green power LED starts blinking.
3. After 6 seconds the printer prints Zebra logo and the
words “Building Two Key Report”, indicating the user to
wait.
Building Two-Key Report.....
21. 21
iMZ Series User Guide
5. LED lighting sequence replicates the one described
above while waiting for the two key report to print.
6. Once boot-up time sequence permits the two key report
to start printing, then the two key report prints.
7. Power LED turns solid Green once two key is complete.
Forced Download Description and LED Behavior
If for some reason the printer becomes inoperable, or the
end-user wants to put the printer into forced download mode,
follow the steps below.
Note: Connect the printer to a PC via a USB cable as shown in Fig. 12
before you start a forced firmware download.
Part 1: Set the Printer in Forced Download Mode and Wait for Data
1. Press and hold the Feed button.
2. Press and hold the Power button for 2 seconds and re-
lease while still pressing the Feed button.
3. The Green power LED will blink.
4. Continue pressing the Feed button for 16 seconds and
then release.
5. The Amber LED will start blinking and the Green LED will
turn solid. This indicates the printer is in forced down-
load mode and waiting for data.
Part 2: Receiving Data
1. Connect the printer to a PC via a USB cable as indicated
above.
2. When a firmware download is initiated, the Green power
LED stays solid, and the Blue communication LED blinks
indicating the printer is receiving data.
Part 3: Writing New Firmware to Flash Memory
1. The Green power LED will remain solid and the Amber
media status LED will blink slowly when recently sent
firmware is being written to the printer’s flash memory.
2. The printer will automatically reboot. (See the following
section.)
22. 22
iMZ Series User Guide
Rebooting After a Firmware Download or Forced Firmware
Download (Description and LED Behavior)
When the user downloads an application (via either a normal
or forced download), the firmware file is written to the printer
flash memory and the printer is automatically rebooted.
When the printer is rebooted, the following occurs in the
printer:
1. Decompression of the downloaded application.
2. Writing process of all the executables, libraries and sup-
port files to the file system.
3. Starting of the normal application start-up process.
Steps 1 and 2 will take approximately 30 seconds. During
those 30 seconds the Green power LED will blink.
The normal boot-up will follow which will take the stan-
dard boot time of approximately 15 seconds. Therefore, af-
ter a firmware download (either normal or forced) the user will
see the Green power LED blink for approximately 35 seconds,
followed by a solid Amber LED and solid Blue LED for a final
overall reboot time of 45 seconds.
Shutting Down LED Sequence
To shut off the printer, press and release the Power button.
Communication (Blue) LED Behavior
Printers with WLAN radio
1. Slow blinking Blue means searching for AP.
2. Solid Blue, means communication with AP established.
3. Fast blinking Blue (data transmission is taking place).
Printers with Bluetooth radio
1. Blue LED is off until communication with other BT device
is established.
2. Once paired, communication LED is solid Blue.
3. Fast blinking Blue (data transmission is taking place).
23. 23
iMZ Series User Guide
Verify the Printer Is Working
Before you connect the printer to your computer, portable
data terminal or wireless LAN, make sure that the printer is in
proper working order. You can do this by printing a configu-
ration label using the “two key reset” method. If you can’t get
this label to print, refer to “Troubleshooting”.
Printing a Configuration Label
1. Press Feed and Power buttons (see Fig. 10) simultane-
ously.
2. Release the Power button after approximately one sec-
ond.
3. Release the Feed button approximately one second after
Green power LED is illuminated.
4. After 6 seconds the printer prints Zebra logo and the
words “Building Two Key Report” indicating the user to
wait.
5. LED lighting sequence replicates the one described in
steps 3) and 4) above while waiting for the two key re-
port to print.
6. Once boot-up time sequence permits the two key report
to start printing, then the two key report prints.
7. Power LED turns solid Green once two key is com-
plete.
Note: Refer to Fig. 18 for details on configuration report content.
24. 24
iMZ Series User Guide
Connecting the Printer
The printer must establish communications with a host ter-
minal which sends the data to be printed. Communications
occur in four basic ways:
• Via a cable using the USB 2.0 protocol. Windows drivers
are available through Zebra Designer Driver. Zebra Setup
Utilities can be used to configure the printer settings us-
ing a USB cable.
• By means of a wireless LAN (Local Area Network) using
an optional radio per 802.11n specifications.
• By means of a Bluetooth short range radio link.
• WinMobile®
, Blackberry®
, and Android®
devices use
standard Bluetooth®
protocol.
• iMZ Series printers are compatible with iOS devic-
es, therefore printing via Bluetooth to an Apple®
device is
possible.
Cable Communication
Caution • The printer should be turned off before connecting or
disconnecting the communications cable.
The small connector on the USB cable plugs into the printer.
The connectors are keyed to assure correct alignment; do not
try to force the cable if it does not plug in. The other end of
the cable must be plugged into the host terminal as shown in
Figure 11, or the USB port on a computer as shown in Figure
12. The iMZ series utilizes the USB Open HCI interface driver
allowing it to communicate with Windows®
based devices.
25. 25
iMZ Series User Guide
USB drivers are included in the Zebra Designer Driver which
can be downloaded from the Zebra Web site. Other terminals
or communications devices may require the installation of
special drivers to use the USB connection. Consult the factory
for further details.
www.zebra.com/imz-info
www.zebra.com/imz-info
USB Communications
Cable to Terminal
Refer to Appendix A for details.
Figure 11: Cable Communications
Figure 12: Communications with a P.C.
Communications
Port
USB Communications
Cable to Computer
Refer to Appendix A for details.
Communications
Port
26. 26
iMZ Series User Guide
Wireless Communications with Bluetooth
Bluetooth is a worldwide standard for the exchange of data
between two devices via radio frequencies. Bluetooth radios
are relatively low powered to help prevent interference with
other devices running at similar radio frequencies. This limits
the range of a Bluetooth device to about 10 meters (32 feet).
Both the printer and the device it communicates with must fol-
low the Bluetooth standard.
Bluetooth Personal Area Network (PAN)
Each Bluetooth enabled iMZ series printer is identified by
a unique Bluetooth Device Address (BDA) loaded into the
printer when manufactured. In order to exchange data, two
Bluetooth enabled devices must establish a connection.
Bluetooth software is always running in the background,
ready to respond to connection requests. One device (known
as the master) must request a connection with another. The
second device (the slave) then accepts or rejects the connec-
tion. A Bluetooth enabled iMZ series printer will normally act
as a slave creating a PAN with the handheld terminal. Up to
seven (7) devices can create a PAN with Bluetooth technology,
and this PAN is referred to as a “Piconet”.
Bluetooth Connections
Bluetooth connections to the iMZ can be created by using
the default user interface for Bluetooth communication that
comes in the handheld device (the master device). Normally,
this process has several steps including “discover the slave
devices nearby”, selecting the printer among those devic-
es and pairing the two devices. The Bluetooth radio in the
iMZ complies to BT spec v.2.1, therefore it supports security
modes 1,2,3, and 4. By default the printer comes with security
mode ”1” (no security). To change the security mode and se-
curity settings in the printer use Zebra Setup Utilities.
If the master device trying to connect to the iMZ only sup-
ports Bluetooth Specification 2.0 or earlier, the iMZ will con-
nect since the Bluetooth standard is backwards compatible
with previous standard versions. If the master device is BT 2.0
or earlier and Authentication is set to “on” from the master
side, then the master device will require a PIN from the printer.
27. 27
iMZ Series User Guide
By default the PIN is not set in the printer. To a set your own
PIN in the printer connect the printer with a cable to a PC or
Laptop and use a Set-up Utility to set a PIN of your choice in
the printer which can be up to 16 characters.
The discovery and pairing routine can be bypassed in cus-
tom applications. Software developers may use Zebra’s
Multiplatform SDK to aid them in coding the connection to the
printer.
Bluetooth pairing requiring Man-In-The-Middle (MITM) protection
Some devices may require an authenticated Bluetooth con-
nection between themselves and the iMZ printer. By requiring
authentication, you can guarantee that the link occurs be-
tween only the two devices involved, and that no third device
(the Man-In-The-Middle) can view the data being passed be-
tween them. MITM protection is possible in Bluetooth security
mode 3 or above.
To authenticate the link, the two devices must demonstrate
that they have each seen the same six digit number during the
pairing process. On the iMZ, the only means of displaying a
six digit number during pairing is to print the value. Therefore,
there is a new SGD provided allowing a set of options:
! U1 setvar “bluetooth.allow _ no _ display _ nu-
meric _ comparison”
The three options are:
1. “off”: Bluetooth pairing uses “Just Works”, with no MITM
protection.
2. “print” (default): The user will compare the six digit value
printed by the printer with the value displayed on the pairing
device. If the values match, the user will accept on the pairing
device and pairing will succeed with MITM protection. If the
values do not match, the user will reject on the pairing device.
Note: Android devices require MITM protection therefore Android
devices will negotiate the connection to Bluetooth security mode 3.
28. 28
iMZ Series User Guide
3. “no print”: The user will accept or reject the value dis-
played on the pairing device. If accepted, the pairing will suc-
ceed. There is a security risk that this connection could be
monitored by another device which interfered during the pair-
ing process.
In addition, the iMZ Series supports Near Field
Communication (NFC) technology. With the new “Print Touch”
feature, end-users can automatically connect via Bluetooth
from a handheld device that supports NFC technology. Simply
touching the NFC handheld device to the “Print Touch” icon
on the printer will connect and pair the handheld device to
the printer. Bluetooth pairing via NFC is supported by the
Multiplatform SDK.
Connecting to Apple Devices
The iMZ Series has the required technology to directly con-
nect via Bluetooth to an Apple device.
If the device has iOS 5, the user must tap the Settings icon
in the Apple device and then select Bluetooth. The discovery
routine will happen automatically from this screen. Once the
printer is discovered, select the printer to finish the pairing
process. Once the iMZ printer is paired, the user will be able to
use the printer in any application that supports the iMZ printer.
A demo application is available in the Apple store.
iM
Z320
http://www.zebra.com/nfc
Figure 13: NFC Connectivity
29. 29
iMZ Series User Guide
In iOS 6 pairing the printer within the application that sup-
ports printing to a Zebra iMZ device is now possible. The
user of an iOS 6 device does not need to pair the printer via
Bluetooth outside the application.
WLAN Overview
iMZ Series printers can be equipped with a radio using the
industry standard 802.11 protocols. They will have the FCC ID
number on the serial number label on the back of the unit.
• iMZ Series Wireless Network Printers with the Zebra
802.11 WLAN radio module can be identified by the text
“Wireless Network Printer” on the serial number label on
the back of the printer.
• These printers allow communication as a node within a
wireless local area network (WLAN). Methods of estab-
lishing communications to the printer will vary with each
application.
General information on establishing WLAN communica-
tions can be found in the ”CPCL Programming Manual” which
is available on-line. More information and LAN configuration
utilities are included in Zebra’s Net Bridge™ program (version
2.8 and later). Zebra Setup Utilities (ZSU) can also be used to
configure WLAN communications settings. Both Net Bridge
and ZSU may be downloaded from the Zebra Web site.
Setting Up the Software
iMZ Series printers use Zebra’s CPCL and ZPL Programming
languages which were designed for mobile printing ap-
plications. CPCL and ZPL are fully described in the ”CPCL
Programming Manual” and the “ZPL Programming Guide”
available on-line at www.zebra.com/manuals.
You can also use Designer Pro, Zebra’s Windows®
based la-
bel creation program which uses a graphical interface to cre-
ate and edit labels in either language.
Refer to Appendix E for tips on downloading the Designer
Pro application from Zebra’s Web site.
30. 30
iMZ Series User Guide
Wearing the Printer
Belt Clip
All iMZ Series printers are have a belt clip installed as a stan-
dard feature. To use: hook the clip over your belt, and ensure
that the clip is securely attached to the belt. The belt clip will
pivot slightly to allow you to move freely while wearing the
printer.
continued
Figure 14: Using the Belt Clip
Clipprintertobelt
31. 31
iMZ Series User Guide
Adjustable Shoulder Strap
Refer to Figure 15 if you have ordered the shoulder strap op-
tion for your printer. Secure each end of the shoulder strap as
shown below. Use the main buckle on the shoulder strap to
adjust to the desired length.
NOTE: If you are using a shoulder strap, ensure it is pulled away from
the printer when installing in the Power Station. See page 13.
www.zebra.com/imz-info
Hold Buckle
Pull Strap here to
lengthen
Pull Strap here to
shorten
Figure 15: Using the Optional Shoulder Strap
Oncetheshoulderstrapissecured,
slidethebuckleasshownuntil
you achieve the desired
length.
Thread the free end of the shoulder strap
through one of the slots on the belt clip
Threadthefreeendoftheshoulderstrapthroughthe
buckle and pull tight to adjust.
Secure the other end of the strap in the remaining slot on the belt clip.
32. 32
iMZ Series User Guide
Preventive Maintenance
Extending Battery Life
• Always observe the safety precautions in the Lithium-
Ion Battery Technical Bulletin included with each Battery
Pack.
• Never expose the battery to direct sunlight or tempera-
tures over 104° F (40° C).
• Do not charge the battery when the temperature exceeds
113° F (45° C).
• Always use a Zebra power supply designed specifically
for the iMZ series printers. Use of any other kind of pow-
er supply may damage the battery.
• Use the correct media for your printing requirements. An
authorized Zebra re-seller can help you determine the op-
timum media for your application.
• If you print the same text or graphic on every label, con-
sider using a pre-printed label.
• Choose the correct print darkness, and print speed for
your media.
NOTE: Use of label media in an iMZ series printer requires a “Tone”
setting of 50 for best results. The Tone setting can be modified by
connecting the printer to a PC and using the Label Vista application.
Refer to the Cable Communications section of “Connecting the
Printer” in this manual.
• Use software handshaking (XON/XOFF) whenever possi-
ble.
• Remember that any rechargeable battery will lose its
ability to maintain a charge over time. It can only be re-
charged a finite number of times before it must be re-
placed. Always dispose of batteries properly. Refer to
Appendix D for more information on battery disposal.
• If you print while charging the battery, charge times will
be prolonged. Extensive printing while charging could de-
plete the battery enough to cause the low battery warn-
ing indicator to turn on. You should suspend printing at
that time and allow the battery to re-charge completely.
continued
33. 33
iMZ Series User Guide
General Cleaning Instructions
Caution • To avoid possible personal injury or damage to the printer,
never insert any pointed or sharp objects into the printer.
Always turn the printer off before performing any cleaning
procedures.
Use care when working near the tear bar. The edges are very sharp.
Caution • The printhead can be very hot after prolonged printing.
Allow it to cool off before attempting any cleaning procedures.
Only use a Zebra cleaning pen or a cotton swab saturated with
alcohol for cleaning the printhead.
Caution • Use only cleaning agents specified in the following tables.
Zebra Technologies Corporation will not be responsible for damage
caused by any other cleaning materials used on this printer.
Area Method Interval
Printhead
Use a Zebra cleaning pen or a
70% isopropyl alcohol solution
on a cotton swab to clean the
print elements from end to end
(the print elements are located
in the thin gray line on the
printhead).
After every five rolls of media
(or more often, if needed)
Linerless media requires
more frequent cleaning.Platen
Use a soft lint-free cloth to
wipe the platen roller when
dirty.
Avoid using alcohol or solvents
on the surface of linerless
platens as they will damage the
platen roller.
Tear bar
Clean thoroughly with a
Zebra cleaning pen or a 70%
isopropyl alcohol solution and
a cotton swab.
Exterior Water dampened cloth As needed
Media
Compartment
Interior
Brush/air blow. Units with
linerless platens: Clean inside
surfaces with a Zebra cleaning
pen or 70% Isopropyl alcohol
on cotton swab.
After every five rolls of media
(or more often, if needed)
Media/Black Bar
Sensor
iMZ Series Cleaning Instructions
34. 34
iMZ Series User Guide
continued
Figure 16: iMZ Series Cleaning
Caution • To avoid possible personal injury or damage to the Printer, never
insert any pointed or sharp objects into the Printer.
Media
Compartment
Printhead
Elements
Tear Bar
Platen Surface
Media/Black
Bar Sensor
35. 35
iMZ Series User Guide
Troubleshooting
Interpreting Indicators
The printer’s indicators display various printer functions
and their status. Check the indicator status, then refer to the
Troubleshooting topic referenced in the chart.
Function
Indicator
Color
Indicator Status:
Steady
Indicator Status:
Blinking
Troubleshooting
Topic
Power Green
Indicates printer is on
and battery condition
is OK to use.
Blinking signifies Low
Battery
3
Charger
Amber/
Green
Off indicates battery
is not charging. Am-
ber indicates battery
is charging. Green
indicates battery is
charged.
N/A 1,6,10
Error Amber
Off indicates no error
condition
No media or media
door is open.
Application may be
missing or corrupted
2,4,7,9
Commu-
nications
Blue
Bluetooth: Printer has
paired with another
Bluetooth device.
Data is being received 5,8
802.11n: Radio is asso-
ciated with a WLAN
Radio is trying to as-
sociate with a WLAN.
5,8
Troubleshooting Topics
1. No power:
• Ensure you press and hold the Power switch until the
Power light comes on.
• Check that battery is installed properly.
• Recharge or replace battery as necessary.
2. Media does not feed:
• Be sure Media Cover is closed and latched.
• Check media compartment. Ensure media is not binding
on the sides of the compartment.
3. Poor or faded print:
• Clean printhead.
• Check battery for possible damage. Recharge or replace as
necessary.
• Check quality of media.
• If using label media, ensure the “Tone” setting is set to 50.
4. Partial or missing print:
36. 36
iMZ Series User Guide
• Check media alignment.
• Clean printhead.
• Ensure Media Cover is properly closed and latched.
5. No print:
• Replace battery.
• Check cable to terminal.
• (Wireless units only) Restore wireless connection.
6. Reduced battery life:
• Check battery date code — if battery is one to two years
old, short life may be due to normal aging.
• Recharge or replace battery.
7. Flashing Amber indicator:
• Check that media is loaded and that printhead is closed and
securely latched.
• If media is present and latch is closed, indicates that no
application is present or application is corrupted. Program
must be re-loaded.
8. Communication Error:
• (Wireless units only) Check that media is loaded, head is
closed and blue communication link light is on.
•(USB) Replace cable to terminal.
9. Label Jam:
• Open media cover.
• Generously apply alcohol to Printer in area of jammed
label.
10. Battery Pack Is Hard to Install:
• Do not force the battery into place. Verify you have not
pinched any wires between the battery and the printer.
• Verify you are plugging the battery connector into the
printer correctly.
37. 37
iMZ Series User Guide
Resetting an iMZ Series Printer
If the printer has locked up and is not responding to any operator inputs
or external commands, either from a connected terminal or from a linked
LAN, you can perform a forced reset as follows:
Press and hold the Power (on/off) button for approx. 4.5 sec-
onds until the printer shuts down.
Information On Back Of Printer
The printer build date is identified by the Year and Week codes of the printer serial number label
located on the bottom of the unit. (See Figure 17 below).
Figure 17: Determining Your Printer Version (iIMZ320 illustrated)
UID#
PLACE BAR CODE HERE
XXXXSYYWWNNNNNS/N:
PLACE BAR CODE HERE
XXX-XXXXXXXX-XXPCC:
Serial Number
encoded in
128 symbology
Product Configuration
Code (PCC)
encoded in
128 symbology
Customer Code
2 Digit
Product Code
2 Digit
UID Number
encoded in
Datamatrix
ECC 200
symbology
Contains FCC ID: I28MD-ZBR4WA; IC ID:3798B-ZBR4WA
ZBR4
Date Code YYWWNNNNN
Sequential number
(00001-99999),resets
each week
Week (01-52)
Last two digits
of year (00-99)Site
1 Digit
38. 38
iMZ Series User Guide
Troubleshooting Tests
Printing a Configuration Label
To print out a listing of the printer’s current configuration fol-
low these steps:
1. Turn the printer off. Load the media compartment with
journal media (media with no black bars printed on the
back)
2. Follow the steps outlined in Diagnostic (Two key) Report LED
Behavior on Page 20.
Refer to Figures 18 and 18a for a sample configuration print-
out.
Communications Diagnostics
If there is a problem transferring data between the computer
and the printer, try putting the printer in the Communications
Diagnostics Mode (also referred to as the “DUMP” mode). The
printer will print the ASCII characters and their text represen-
tation (or the period ‘.’, if not a printable character) for any data
received from the host computer
To enter Communications Diagnostics Mode:
1. Print a configuration label as described above.
2. At the end of 2nd diagnostics report, the printer will print:
“Press FEED key to enter DUMP mode”.
3. Press the FEED key. The printer will print: “Entering
DUMP mode”.
Note • If the FEED key is not pressed within 3 seconds, the printer
will print “DUMP mode not entered” and will resume normal
operation.
4. At this point, the printer is in DUMP mode and will print
the ASCII hex codes of any data sent to it, and their text
representation (or “.” if not a printable character).
Additionally, a file with a “.dmp” extension containing the
ASCII information will be created and stored in the printer’s
memory. It can be viewed, “cloned” or deleted using the Label
Vista application. (Refer the Label Vista documentation for
more information.)
To terminate the Communications Diagnostics Mode and re-
39. 39
iMZ Series User Guide
turn the printer to normal operations:
1. Turn the printer OFF.
2. Wait 5 seconds.
3. Turn the printer ON.
Calling Technical Support
If the printer fails to print the configuration label, or you en-
counter problems not covered in the Troubleshooting Guide,
contact Zebra Technical Support. Technical Support ad-
dresses and phone numbers for your area can be found in
Appendix D of this manual. You will need to supply the fol-
lowing information:
• Model number and type (e.g. iMZ220)
• Unit serial number (Found on the large label on the back
of the printer, also found in the configuration label print-
out. Refer to Figure18.)
• Product Configuration Code (PCC) (15 digit number found
on the label on the back of the unit)
40. 40
iMZ Series User Guide
Identifies Printer
as a iMZ320
Firmware Version
Print Head Test
Bluetooth™
Radio Address
Figure 18: Configuration Label Example (iMZ320 illustrated)
Report ap-
pears only
on units with
wireless op-
tions installed.
Units with no
wireless op-
tions will print
an empty line
and resume
Unit Serial Number
41. 41
iMZ Series User Guide
continued
Resident Human
Readable fonts
installed.
Files Loaded in
Printer Memory
(will include Pre-
scaled or Scal-
able Fonts).
Figure18a: Configuration Label Example (continued)
Flash
and RAM
Memory
Installed
Maximum
Label Size
CCL (CPCL)
and ZPL
programming
language is
supported
42. 42
iMZ Series User Guide
Specifications
Note.- Printer specifications are subject to change without notice.
Printing Specifications
Parameter iMZ220 iMZ320
Print Width Up to 1.89 in. (48,0 mm) Up to 2.9 in. (71,2 mm)
Print Speed (max) 3” per second (76,2 mm/second)
Print Speed (normal) 2” per second (5,0 mm/second)
Print Head Life,
calculated
1 x 106
in. (25,4 Km) nominal
Print Density 203 dots/inch (8 dots/mm)
Printhead Burn
Line to Tear Edge
0.2 in. (5,08 mm)
Memory and Communications Specifications, iMZ series
Flash Memory 128 MB
SRAM 128 MB
Standard
Communications
USB 2.0 Full Speed Interface (12 Mbps)
Optional Wireless
Communications
Standard Bluetooth compatible module
Optional 802.11a/b/g/n SRRF module
Dual radio option (802.11a/b/g/n & BT 3.0 available in
Q1-2013
Media Specifications
Parameter iMZ220 iMZ320
Width
2.0 ± .03 in.
(50,8 ±0,8 mm)
3.0 ± .03 in.
(76,2 mm ±0,8 mm)
Max.
Printable
Area
Width
Length
1.9” (48,3 mm) 2.9” (73,7 mm)
Maximum length will vary with the size of loaded applications.
Refer to the configuration label for actual maximum label size.
Label Thickness .002 in to .004 in (0,050 mm to 0,102 mm)
Max. Media Roll
dia.
1.88 in. (47,8 mm) O.D.
Label Inner Core
Diameter
0.40 to 0.75 in.. (10,2 to 19,0 mm)
Black Mark
Dimensions
The reflective media black marks should extend past the
centerline of the roll on the front side of the media.
Minimum mark width: 0.59 in. (15 mm) perpendicular
to edge of media, centered within the width of the roll.
Mark length: 0.19 - 0.24 in. (3,0-6,0 mm) parallel to
edge of media. (See Fig. 7)
UseZebrabranddirectthermalorUVresistantcoatedmediathatisoutsidewound. RefertoAppendix
“B” for more details.
43. 43
iMZ Series User Guide
ZPL Bar Code Specifications and Commands
Linear & 2-D Bar
Codes Available
Barcode (ZPL Command)
Aztec (^B0)
Codabar (^BK)
Codablock (^BB)
Code 11 (^B1)
Code 39 (^B3)
Code 49 (B4)
Code 93 (^BA)
Code 128 (^BC)
DataMatrix (^BX)
EAN-8 (^B8)
EAN-13 (^BE)
GS1 DataBar Omnidirectional (^BR)
Industrial 2 of 5 (^BI)
lnterleaved 2 of 5 (^B2)
ISBT-128 (^BC)
LOGMARS (^BL)
Micro-PDF417 (^BF)
MSI (^BM)
PDF-417 (^B7)
Planet Code (^B5)
Plessey (^BP)
Postnet (^BZ)
Standard 2 of 5 (^BJ)
TLC39 (^BT)
UPC/EAN extensions (^BS)
UPC-A (^BU)
UPC-E (^B9)
Maxi Code (^BD)
QR Code (^BQ)
Rotation Angles 0°, 90°, 180°, and 270°
*Contains UFST from Agfa Monotype Corporation
44. 44
iMZ Series User Guide
CPCL and ZPL Font Specifications
CPCL Font Specification: 203 dpi (8 dots/mm)
Fonts Matrix
(in dots)
(HxW)
Min. Char.
Size (HxW)
Max. CPI
0 (Standard) 9 x 8 .044" x .039" 25.4
1 (min. width) 48 x 13 .236" x .064" 15.6
1 (max. width) 48 x 39 .236” x .192” 5.2
2 (OCR-A) 12 x 20 .059" x .099" 10.2
4 Size 0 (min. width) 47 x 11 .232" x .054" 18.5
4 Size 0 (max. width) 47 x 43 .232” x .212” 4.7
5 Size 0 (min. width) 24 x 7 .118" x .034" 29
5 Size 0 (max. width) 24 x 23 .118” x .113” 8.8
6 (MICR) 27 x 28 .133" x .138" 7.3
7 24 x 12 .118” x .059” 16.9
• Standard Fonts: 25 bitmapped, 1 smooth, scalable (CG
Triumvirate Bold Condensed*)
• Optional Fonts: downloadable bitmapped/scalable fonts.
• International Character Sets (optional): Chinese 16x16 (tra-
ditional), 16x16 (simplified), 24x24 (simplified); Japanese
16x16, 24x24; Korean Mincho, Meong; Russian.
• Scalable text feature.
• Standard resident fonts can be rotated in 90° increments.
• Supports user defined fonts, and graphics and logos.
• Text concatenation to assign different character styles.
• Allows text magnification 1-16 times the original size.
• Proportional and fixed-width fonts.
*Contains UFST from Agfa Monotype Corporation
45. 45
iMZ Series User Guide
ZPL Font Specification: 203 dpi (8 dots/mm)
Font Matrix
(in dots)
(HxW)
Type* Min.
Char. Size
(HxW)
Maz.
C.P.I.
A 9 x 5 U-L-D .044" x .030" 33.3
B 11 x 7 U .054" x .044" 22.7
C,D 18 x 10 U-L-D .089" x .059" 16.9
E 28 x 15 OCR-B .138" x .098" 10.2
F 26 x 13 U-L-D .128" x .079" 12.7
G 60 x 40 U-L-D .295" x .236" 4.2
H 21 x 13 OCR-A .103" x .093" 10.8
GS 24 x 24 SYMBOL .118" x .118" 8.5
P 20 x 18 U-L-D 0.098 x 0.089 N/A
Q 28 x 24 U-L-D 0.138 x 0.118 N/A
R 35 x 31 U-L-D 0.172 x 0.153 N/A
S 40 x 35 U-L-D 0.197 x 0.172 N/A
T 48 x 42 U-L-D 0.236 x 0.207 N/A
U 59 x 53 U-L-D 0.290 x 0.261 N/A
V 80 x 71 U-L-D 0.394 x 0.349 N/A
Ø 15 x 12 U-L-D Scalable (Smooth) Font
*U=upper case, L=lower case, D=descenders
• Character Fonts: Standard bitmapped Zebra fonts: A, B, C,
D, E (OCR-B), F, G, H, (OCR-A), GS, P, Q, R, S, T, U, V & Ø
Smooth font (CG Triumvirate Bold Condensed).
• Supports Unicode UTF-8, UTF-16, and several other single
and multi-byte international character sets (See ZPL pro-
gramming guide for more details).
• Supports user defined fonts and graphics – including cus-
tom logos.
• Bitmap fonts are expandable up to 10 times, height and
width independent. Fonts E and H (OCR-B and OCR-A),
however, are not considered in spec when expanded.
• Smooth scalable font Ø (CG Triumvirate Bold Condensed)
is expandable dot-by-dot, height and width independent.
• Unicode Swiss 721 font available.
46. 46
iMZ Series User Guide
continued
Figure 19: USB Communications Port
5 1
Physical, Environmental and Electrical Specifications
Parameter IMZ220 IMZ320
Weight w/
battery,
excluding media
.70 lbs.
(317,5 g. )
.75 lbs.
(340,2 kg.)
Temperature
Operating : 14° to 122° F (-10° to
50° C)
Charging: 32° to 104° F (-0° to 40° C)
Storage w/o battery: -4° to 140° F
(-25° to 60° C)
Storage w/ battery: -4° to 113° F
(-25° to 45°C)
Relative
Humidity
Operating: 10% to 90% (non-
condensing)
Storage: 10% to 90% (non-
condensing)
Battery Lithium-Ion, 7.4 VDC (nominal);
1500 mAHr.
Printer Input
Power
12.0 VDC; 1.25A
Ingression
Protection (IP)
Rating
42
USB Communications Port
Pin# Signal
Name
Type Description
1 VBUS - USB Bus Power
2 USB - bi-directional I/O Signals
3 USB + bi-directional I/O Signals
4 USB_ID - Identifies A/B connector
5 Return - Ground
48. 48
iMZ Series User Guide
iMZ Series Accessories
Description IMZ220 IMZ320
Adjustable shoulder strap • •
Protective soft case • •
Vehicle Adapter Cable • •
Extra battery packs • •
iMZ Series Quad Power
Station
100-240 VAC
• •
Refer to Appendix A for information on Data I/O Cables
For more details on available accessories, contact your authorized
Zebra re-seller.
49. 49
iMZ Series User Guide Appendices
Appendix A
Interface Cables
USB Cable
Part Number AT17010-1; USB A to USB Mini B Cable
More Interface Cables
Contact the Factory or your Zebra Sales Representative for more
information on interface cables to most major manufacturer’s data
terminals.
You may also visit the Zebra Web site at http://www.zebra.com for a
listing of interface cables for all series of Zebra mobile printers
50. 50
iMZ Series User Guide Appendices
Appendix B
Media Supplies
To insure maximum printer life and consistent print qual-
ity and performance for your individual application, it is rec-
ommended that only media produced by Zebra be used.
Advantages include:
• Consistent quality and reliability of media products.
• Large range of stocked and standard formats.
• In-house custom format design service.
• Large production capacity which services the needs of
many large and small media consumers including major
retail chains world wide.
• Media products that meet or exceed industry standards.
iMZ Series Media
Z-Select 4000D 3.2 mil Receipt
Width x Length Part # Length Rolls/Carton Wt/Carton
2.00” (50,8 mm) x Cont. 10011043 55’ (16,76 M) 36 9 lbs.
3.00” (76,2 mm) x Cont. 10011044 55’ (16,76 M) 36 13 lbs.
Z-Select 1000D 2.4 mil Receipt
Width x Length Part # Length Rolls/Carton Wt/Carton
2.00” (50,8 mm) x Cont. 10011041 80’ (24,39 M) 36 9 lbs.
3.00” (76,2 mm) x Cont. 10011042 80’ (24,39 M 36 13 lbs.
For more information call Zebra Technologies Corporation at
+1.866.230.9495 (U.S., Canada and Mexico) and ask to speak
to a Media Sales Representative.
51. 51
iMZ Series User Guide Appendices
Appendix C
Battery Disposal
The EPA certified RBRC®
Battery Recycling
Seal on the Lithium-Ion (Li-ion) battery supplied
with your printer indicates Zebra Technologies
Corporation is voluntarily participating in an in-
dustry program to collect and recycle these
batteries at the end of their useful life, when
taken out of service in the United States or Canada. The RBRC
program provides a convenient alternative to placing used
Li-ion batteries into the trash or the municipal waste stream,
which may be illegal in your area.
Important • When the battery is worn out, insulate the terminals with
tape before disposal
Please call 1-800-8-BATTERY for information on Li-ion bat-
tery recycling and disposal bans/restrictions in your area.
Zebra Technologies Corporation’s involvement in this program
is part of our commitment to preserving our environment and
conserving our natural resources.
Outside North America, please follow local battery recycling
guidelines.
Product Disposal
Do not dispose of this product in unsorted
municipal waste. This product is recyclable.
Please recycle according to your local stan-
dards. For more information, please see our
web site at: http://www.zebra.com/recycle.
52. 52
iMZ Series User Guide Appendices
Appendix D
Product Support
When calling with a specific problem regarding your
printer, please have the following information on hand:
• Model number/type (e.g. iMZ220)
• Unit serial number
• Product Configuration Code (PCC)
For Product Support Contacts, see the table on the next
page or contact your local re-seller.
iMZ Series Serial Number Label
iMZ 220 illustrated
www.zebra.com/imz-info
Serial
Number
Bar Code
PCC
Bar Code
53. 53
iMZ Series User Guide Appendices
Product Support Contacts
In the Americas contact
Regional Headquarters Technical Support Customer Service
Dept.
Zebra Technologies Corporation
475 Half Day Road, Suite 500
Lincolnshire, Illinois 60069 U.S.A
T: +1 847 634 6700
Toll-free +1 866 230 9494
F: +1 847 913 8766
T: +1 877 275 9327
F: +1 847 913 2578
Hardware:
ts1@zebra.com
Software:
ts3@zebra.com
Forprinters,parts,media,
and ribbon, please call
your distributor, or
contact us.
T: +1 877 275 9327
E: clientcare@zebra.com
In Europe, Africa, the Middle East, and India contact
Regional Headquarters Technical Support Internal Sales Dept.
Zebra Technologies Europe
Limited
Dukes Meadow
Millboard Road
Bourne End
Buckinghamshire SL8 5XF, UK
T: +44 (0)1628 556000
F: +44 (0)1628 556001
T: +44 (0) 1628 556039
F: +44 (0) 1628 556003
E: Tseurope@zebra.com
For printers, parts,
media, and ribbon,
p l e a s e c a l l y o u r
distributor, or contact
us.
T: +44 (0) 1628 556032
F: +44 (0) 1628 556001
E: cseurope@zebra.com
In the Asia Pacific region contact
Regional Headquarters Technical Support Customer Service
Zebra Technologies Asia Pacific
Pte. Ltd.
120 Robinson Road
#06-01 Parakou Building
Singapore 068913
T: +65 6858 0722
F: +65 6885 0838
T: +65 6858 0722
F: +65 6885 0838
E: (China)
tschina@zebra.com
All other areas:
tsasiapacific@zebra.com
For printers, parts, media,
and ribbon, please call your
distributor, or contact us.
T: +65 6858 0722
F: +65 6885 0836
E: (China) order-csr@zebra.com
All other areas:
csasiapacific@zebra.com
54. 54
iMZ Series User Guide Appendices
continued
Appendix E
Using zebra.com
The following examples use the search functions on Zebra’s
Web site for finding specific documents .
Example1: Find the iMZ Series User Guide.
Go to http://www.zebra.com/us/en/support-downloads.html
Select the appropriate printer in the Printer Support dropdown menu.
Select
Printer
Click on the Manuals tab and select the desired language from the dropdown menu.
Select language
55. 55
iMZ Series User Guide Appendices
Example 2: Find the ZebraNet Bridge Enterprise download page:
Go to http://www.zebra.com/us/en/products-services/software.html and click
on Manage under Software in the Products and Services section. Or click on Manage Software where
shown.
Click on “Download” in the Downloads tab where shown to access the latest soft-
ware.
Click on
Download
Select the
“ZebraNet
Bridge
Enterprise
56. 56
iMZ Series User Guide
Index
A
Accessories
Belt clip 30
list of 48
Shoulder Strap 31
Appendix G 54
B
Battery, charging 11
MZ Series Charger Power Supply 12
using Quad Power Station 13
Battery, installing 9
Battery life, tips for extending 32
Battery, removing 10
Bluetooth Device Address (BDA) 26
Bluetooth™ Networking Overview 26
C
Cable Communication 25
Cleaning
general instructions 33
Communications
infrared (IR) 25
with a cable 24
Communications diagnostics 38
Configuration Label
printing 38
to determine maximum label size 42
F
Font & Barcode Specs
ZPL 43
I
iMZ Series Quad Power Station 13
Information on Back of Printer 37
L
Label Vista
use in troubleshooting 38
M
Manual
CPCL Programming 29
Media
loading 15
pre-printed 16
N
NFC Tag 8
O
Operator Controls 18
P
Preventive Maintenance 32
Programming language
CPCL 7
R
Radio options.?See Wireless communications
Resetting an iMZ Series Printer 37
S
Safety Precautions
placement of charger 14
while charging batterys 14
Software 29
Specifications
Memory/communications 42
Physical 46
printing 42
T
Technical Support, contacting 39
Troubleshooting
Communications Diagnostics Mode 38
control panel indicators 35
Troubleshooting tests 38
printing a configuration label 23,?38
QL configuration label example 37,?40
Troubleshooting Topics 35
W
Wearing the Printer 30
Wireless communications
Bluetooth™ radio 26
Infrared (IrDA) 25
WLAN Overview 28
Z
ZPL Font and Bar Code Specifications and Com-
mands 43