Sichuan Yaxi Machine was founded in 1942 and is a state-owned enterprise located in Southwest China that manufactures rubber and plastic machinery. It has over 600 employees and produces a wide range of equipment for rubber mixing, calendaring, recycling scrap tires, and more. Yaxi Machine exports products to over 10 countries and has a long history and reputation for quality in the rubber machinery industry.
Clirik featured product mineral powder grinding mill with ceisoAmmy Cheng
1. The document describes a mineral powder grinding mill that can grind materials into powder between 150-3000 mesh sizes.
2. It has high efficiency and energy savings compared to other mills. It also has a long lifecycle and is safe and reliable to use.
3. The mill can grind materials into a fine powder between 325-2500 mesh and achieve over 97% fineness of 5 microns or less.
Clirik clum mill-calcium carbonate powder making machine Ammy Cheng
clum series vertical mill is the professional used for calcium carbonate powder making machine .it is made by shanghai clirik machinery co,.ltd.the websites :
http://www.gypsumgrindingmill.in/
This document summarizes the key specifications and features of the HGM series stone grinding mill machine. The mill is suitable for grinding materials with a Mohs hardness of less than 9 to a fineness of 150-3000 mesh. It has high efficiency and energy savings compared to other mills. The main components include the grinding chamber, classifier, speed reducer, and other auxiliary equipment. The manufacturer is Shanghai Clirik Machinery Co which specializes in mining equipment.
Haohua Group has two factories - Huadong Rubber Co. and Shandong Haohua Tire Co. Huadong Rubber was founded in 1991 and produces steel radial tires. Shandong Haohua Tire was founded in 2011 in Weifang, China and produces passenger, light truck, and bus tires under various brands. The document provides details on production equipment and facilities at both factories, including mixing, calendaring, tire building, curing, inspection, and warehouse equipment from manufacturers in Italy, Germany, Japan, and China.
Mechanically induced Calender Gauge variations relate directly to your rubber calender's mechanical condition. Thus it's basically a maintenance issue. While there are many maintenance issues that could affect your calender performance, these FIVE directly effect your rubber sheet's calendered gauge
training report on Jyoti cnc automation ltd.Ketan Gojiya
This document provides an overview of Jyoti CNC Automation Ltd., including descriptions of its various production shops. The company operates foundry, sheet metal, paint, machining, and assembly shops. In the foundry shop, the casting process is described, involving sand mixing and mold making, melting and pouring metal, cooling and removing castings. The sheet metal shop uses laser cutting, bending, welding, and grinding equipment. The paint shop provides surface coating using pretreatment and powder coating. The machining shop machines casted parts using techniques like turning, milling, and grinding. The assembly shop assembles CNC machines using a fixed position layout.
The quartz powder grinding machine can grind materials into fine powders between 325 mesh and 2500 mesh (5-47 microns) with several advantages over other mills. It has no moving parts to wear out and produces powders in a very narrow particle size range at high efficiency while using 30% less energy compared to other mills. The machine can be adjusted to control the final particle size and comes in several models with throughput capacities ranging from 0.4 to 30 tons per hour. It has a long lifecycle and is safe, reliable, and environmentally friendly.
Clirik featured product mineral powder grinding mill with ceisoAmmy Cheng
1. The document describes a mineral powder grinding mill that can grind materials into powder between 150-3000 mesh sizes.
2. It has high efficiency and energy savings compared to other mills. It also has a long lifecycle and is safe and reliable to use.
3. The mill can grind materials into a fine powder between 325-2500 mesh and achieve over 97% fineness of 5 microns or less.
Clirik clum mill-calcium carbonate powder making machine Ammy Cheng
clum series vertical mill is the professional used for calcium carbonate powder making machine .it is made by shanghai clirik machinery co,.ltd.the websites :
http://www.gypsumgrindingmill.in/
This document summarizes the key specifications and features of the HGM series stone grinding mill machine. The mill is suitable for grinding materials with a Mohs hardness of less than 9 to a fineness of 150-3000 mesh. It has high efficiency and energy savings compared to other mills. The main components include the grinding chamber, classifier, speed reducer, and other auxiliary equipment. The manufacturer is Shanghai Clirik Machinery Co which specializes in mining equipment.
Haohua Group has two factories - Huadong Rubber Co. and Shandong Haohua Tire Co. Huadong Rubber was founded in 1991 and produces steel radial tires. Shandong Haohua Tire was founded in 2011 in Weifang, China and produces passenger, light truck, and bus tires under various brands. The document provides details on production equipment and facilities at both factories, including mixing, calendaring, tire building, curing, inspection, and warehouse equipment from manufacturers in Italy, Germany, Japan, and China.
Mechanically induced Calender Gauge variations relate directly to your rubber calender's mechanical condition. Thus it's basically a maintenance issue. While there are many maintenance issues that could affect your calender performance, these FIVE directly effect your rubber sheet's calendered gauge
training report on Jyoti cnc automation ltd.Ketan Gojiya
This document provides an overview of Jyoti CNC Automation Ltd., including descriptions of its various production shops. The company operates foundry, sheet metal, paint, machining, and assembly shops. In the foundry shop, the casting process is described, involving sand mixing and mold making, melting and pouring metal, cooling and removing castings. The sheet metal shop uses laser cutting, bending, welding, and grinding equipment. The paint shop provides surface coating using pretreatment and powder coating. The machining shop machines casted parts using techniques like turning, milling, and grinding. The assembly shop assembles CNC machines using a fixed position layout.
The quartz powder grinding machine can grind materials into fine powders between 325 mesh and 2500 mesh (5-47 microns) with several advantages over other mills. It has no moving parts to wear out and produces powders in a very narrow particle size range at high efficiency while using 30% less energy compared to other mills. The machine can be adjusted to control the final particle size and comes in several models with throughput capacities ranging from 0.4 to 30 tons per hour. It has a long lifecycle and is safe, reliable, and environmentally friendly.
Clirik large capacity ball mill cement ball mill with fairest priceAmmy Cheng
This document summarizes the specifications and features of the Clirik Large Capacity Ball Mill/Cement Ball Mill. Key details include:
- The ball mill is used for grinding materials into fine particle sizes and can grind a variety of materials. It works by rotating a cylinder with grinding balls that impact and grind the materials.
- Models range in cylinder size from 900x1800 to 3600x8500 and have processing capacities from 0.8 to 260 tons per hour. They can produce particle sizes from 75 to 890 microns.
- Features include high production capacity, low energy consumption, simple structure, and low costs. The company is based in Shanghai and has experience manufacturing grinding mills.
This document provides a history of ISGEC Heavy Engineering Ltd, an Indian engineering company established in 1933. It details the company's origins in sugar milling and its evolution into a global engineering firm. The summary highlights that ISGEC now has operations in over 76 countries, key partnerships and acquisitions over the years that expanded its capabilities, and financial data showing its growth into a multi-billion dollar company.
Harbin Dadi Biology Organic Fertilizer Co., Ltd. is a Chinese manufacturer of organic fertilizer granulation equipment, animal feed pellet machines, and biomass fuel pellet machines. They have over 8 years of experience and produce a line of granulation machines in various sizes with capacities ranging from 0.3 to 30 tons per hour. Their products are used to make organic fertilizer granules, wood pellets, and animal feed pellets from various raw materials. The company is located in Harbin, China and exports its products internationally.
This document summarizes the products and services of Harbin Dadi Biology Organic Fertilizer Co., Ltd., an organic fertilizer equipment manufacturer located in Harbin, China. It describes their main products as organic fertilizer granule machines, animal feed pellet machines, and biomass fuel pellet machines. It provides technical specifications for various models of these machines with different capacities, power requirements, and sizes. It also describes the components of a complete organic fertilizer production line that the company can provide.
Harbin Dadi Biology Organic Fertilizer Co., Ltd. manufactures and exports organic fertilizer granule machines, animal feed pellet machines, and biomass fuel pellet machines. The company was founded in 2006 and is located in Harbin, China. It produces a line of organic fertilizer granulation machines in various sizes with capacities ranging from 0.3 to 9 tons per hour.
The Rotosolver II is a high shear mixer developed by Admix to improve on their existing Rotosolver design. It delivers enhanced performance and efficiency through several design improvements:
1. It reduces energy consumption by up to 30% through streamlining and utilizing computational fluid dynamics software during development.
2. It improves dispersion by providing over 115% more mechanical high shear surface area and more than doubling the number of shearing edges.
3. It features an easy-to-clean design with an open mixing chamber to allow for thorough cleaning.
HMT Ltd. Pinjore is a machine tool manufacturing company located in Pinjore, India. It was established in 1963 and produces milling machines. The presentation discusses the various production processes at HMT Pinjore, including the pattern shop, foundry, heat treatment, machine shop, engine assembly, testing, and tractor assembly. Key parts of the engine like the crankcase, cylinder, piston, connecting rod, and crankshaft are machined at HMT. Finally, HMT produces several models of tractors.
The document provides details about an industrial training project on automation using programmable logic controllers (PLCs) conducted by Rohit Singh at Moserbaer in Noida, India. It describes Moserbaer's CD manufacturing process which involves 23 steps from color buffer to receiver handler. These include cooling, dye coating, quality control, sputtering, UV lacquering and final inspection. PLCs are used to automate the process by controlling pneumatic cylinders, sensors and other components involved in the robotic arms that transport CDs between each stage.
- Isgec Heavy Engineering is a large Indian engineering company with over 5,500 employees and annual turnover over $500 million.
- They have 80 years of experience in boilers and 48 years specifically in high pressure boilers.
- They supply a wide range of industrial boiler systems as well as providing turnkey solutions for entire thermal power plants and sugar mills.
The Dolomite powder making machine has several advantages over other mills including the ability to grind friable materials to a fine particle size range of 5-74 microns while classifying. It has no moving parts to wear out or generate heat. The manufacturer, Shanghai Clirik Machinery CO., LTD, has over 8 years of experience producing these machines which can adjust particle size by changing the feed rate. The machines come in several models with varying capacities from 0.4 to 30 tons per hour.
Quantum X is created with patented Norton Quantum and Vortex2 3D engineered grain spacing, combined with the revolutionary Vitrium3 bond innovation; resulting in a grinding wheel that provides maximum performance, raised productivity and reduced process costs.
Through research and development, Winter has created a new type of grinding wheel called CarbonForce. CarbonForce uses a lightweight carbon fiber reinforced polymer core, offering higher strength than steel but lower weight than aluminum. This provides a 75% weight reduction over steel-hubbed wheels. The lightweight wheels are easier for operators to handle and enable higher wheel speeds and productivity. They also improve surface finish, reduce costs, and increase machine life. CarbonForce is well-suited for applications like outer diameter grinding, centerless grinding, camshaft grinding, and gear grinding.
Deepak Jain has over 12 years of experience in finance, accounting, costing, budgeting and MIS. He currently works as the Manager of Plant Accounting and Finance at Carlsberg India Pvt. Ltd. in Alwar, Rajasthan. He has a CA certification from the Institute of Chartered Accountants of India and a B.Com degree. Previously he has worked at Axa Parenteral Limited and Hemma Herbs Pvt. Limited in various finance and accounting roles. He is proficient in ERP systems like SAP and Microsoft Office applications.
The survey of 63 employees of the Office of the Attorney General found that most commute from the Richmond area and drive alone. Two-thirds said they would be more likely to carpool if an emergency ride home program was available. Respondents were willing to drive up to four miles to join a carpool or vanpool and cited lack of flexibility as the primary reason for not currently using alternatives to driving alone. The emergency ride home program was seen as the largest motivating factor for switching to an alternative commute mode.
This document describes a problem-based learning (PBL) assignment for an Engineering Mathematics course at Bahrain Polytechnic that involves solving Archimedes' sphere and cylinder problem. The assignment aims to address various learning outcomes related to theoretical mathematics knowledge, practical skills, and problem-solving skills. Students are tasked with parameterizing the problem, calculating volumes using integration techniques, applying trigonometric identities and series expansions, and verifying the solution numerically and experimentally.
The document discusses spend under management (SUM) as an important organizational initiative that aims to bring 85% or more of an enterprise's total spending under active management. This can result in cost savings of 5-20% per dollar of new spend brought under management, translating to millions or even tens of millions in realized savings. SUM is more than just sourcing and considers factors like ensuring adherence to contracts, purchase order accuracy, demand management, and supplier performance management.
This report examines potential solutions to reduce single-occupancy vehicle commuting in the Richmond, Virginia region. It analyzes case studies of cash incentive programs for carpooling in Atlanta, Seattle, and Washington D.C. that provided financial compensation of $1-3 per trip. The report recommends that RideFinders apply for a grant to implement a two-to-three month pilot program in Richmond offering cash rewards of up to $50-75 per month for carpooling, modeled after successful programs that increased carpooling rates and ridership retention. Outreach to employers would promote the temporary incentive program aimed at encouraging more commuters to carpool instead of driving alone.
Velox Cabs is a radio taxi company located in and around Coimbatore, India that provides timely transportation services. The company plans to set up an office and parking area by renting 1900 square feet of space for Rs. 6,00,000 initially and Rs. 35,000 per month. Velox Cabs will operate in the growing radio taxi industry in India, which has an annual turnover of Rs. 1,100 crore and 35% annual growth. The company conducts a SWOT analysis and financial projections to establish a strong business model to take advantage of the increasing demand for reliable radio taxi services.
This document contains slides from a presentation on JavaScript fundamentals. It introduces JavaScript's core data types like numbers, strings, Booleans, objects and arrays. It also covers language features like functions, control structures, callbacks and custom objects. It includes examples and three coding exercises ("Labs") to practice working with ranges, vectors and callbacks in JavaScript.
The document discusses the Global Reporting Initiative (GRI) framework for sustainability reporting. It provides the following key details:
- GRI is an international independent standards organization that helps organizations report on their economic, environmental, and social impacts. Over 7,500 organizations use GRI guidelines for sustainability reports.
- The GRI framework provides a holistic approach to address broad social, environmental, and economic performance. It includes standard disclosures and indicators to measure and benchmark organizational impacts.
- Major Indian companies like Maruti Suzuki, Wipro, and others have adopted the GRI framework to report on their sustainability performance and impacts in areas like reducing environmental footprint, resource efficiency, and social initiatives.
Clirik large capacity ball mill cement ball mill with fairest priceAmmy Cheng
This document summarizes the specifications and features of the Clirik Large Capacity Ball Mill/Cement Ball Mill. Key details include:
- The ball mill is used for grinding materials into fine particle sizes and can grind a variety of materials. It works by rotating a cylinder with grinding balls that impact and grind the materials.
- Models range in cylinder size from 900x1800 to 3600x8500 and have processing capacities from 0.8 to 260 tons per hour. They can produce particle sizes from 75 to 890 microns.
- Features include high production capacity, low energy consumption, simple structure, and low costs. The company is based in Shanghai and has experience manufacturing grinding mills.
This document provides a history of ISGEC Heavy Engineering Ltd, an Indian engineering company established in 1933. It details the company's origins in sugar milling and its evolution into a global engineering firm. The summary highlights that ISGEC now has operations in over 76 countries, key partnerships and acquisitions over the years that expanded its capabilities, and financial data showing its growth into a multi-billion dollar company.
Harbin Dadi Biology Organic Fertilizer Co., Ltd. is a Chinese manufacturer of organic fertilizer granulation equipment, animal feed pellet machines, and biomass fuel pellet machines. They have over 8 years of experience and produce a line of granulation machines in various sizes with capacities ranging from 0.3 to 30 tons per hour. Their products are used to make organic fertilizer granules, wood pellets, and animal feed pellets from various raw materials. The company is located in Harbin, China and exports its products internationally.
This document summarizes the products and services of Harbin Dadi Biology Organic Fertilizer Co., Ltd., an organic fertilizer equipment manufacturer located in Harbin, China. It describes their main products as organic fertilizer granule machines, animal feed pellet machines, and biomass fuel pellet machines. It provides technical specifications for various models of these machines with different capacities, power requirements, and sizes. It also describes the components of a complete organic fertilizer production line that the company can provide.
Harbin Dadi Biology Organic Fertilizer Co., Ltd. manufactures and exports organic fertilizer granule machines, animal feed pellet machines, and biomass fuel pellet machines. The company was founded in 2006 and is located in Harbin, China. It produces a line of organic fertilizer granulation machines in various sizes with capacities ranging from 0.3 to 9 tons per hour.
The Rotosolver II is a high shear mixer developed by Admix to improve on their existing Rotosolver design. It delivers enhanced performance and efficiency through several design improvements:
1. It reduces energy consumption by up to 30% through streamlining and utilizing computational fluid dynamics software during development.
2. It improves dispersion by providing over 115% more mechanical high shear surface area and more than doubling the number of shearing edges.
3. It features an easy-to-clean design with an open mixing chamber to allow for thorough cleaning.
HMT Ltd. Pinjore is a machine tool manufacturing company located in Pinjore, India. It was established in 1963 and produces milling machines. The presentation discusses the various production processes at HMT Pinjore, including the pattern shop, foundry, heat treatment, machine shop, engine assembly, testing, and tractor assembly. Key parts of the engine like the crankcase, cylinder, piston, connecting rod, and crankshaft are machined at HMT. Finally, HMT produces several models of tractors.
The document provides details about an industrial training project on automation using programmable logic controllers (PLCs) conducted by Rohit Singh at Moserbaer in Noida, India. It describes Moserbaer's CD manufacturing process which involves 23 steps from color buffer to receiver handler. These include cooling, dye coating, quality control, sputtering, UV lacquering and final inspection. PLCs are used to automate the process by controlling pneumatic cylinders, sensors and other components involved in the robotic arms that transport CDs between each stage.
- Isgec Heavy Engineering is a large Indian engineering company with over 5,500 employees and annual turnover over $500 million.
- They have 80 years of experience in boilers and 48 years specifically in high pressure boilers.
- They supply a wide range of industrial boiler systems as well as providing turnkey solutions for entire thermal power plants and sugar mills.
The Dolomite powder making machine has several advantages over other mills including the ability to grind friable materials to a fine particle size range of 5-74 microns while classifying. It has no moving parts to wear out or generate heat. The manufacturer, Shanghai Clirik Machinery CO., LTD, has over 8 years of experience producing these machines which can adjust particle size by changing the feed rate. The machines come in several models with varying capacities from 0.4 to 30 tons per hour.
Quantum X is created with patented Norton Quantum and Vortex2 3D engineered grain spacing, combined with the revolutionary Vitrium3 bond innovation; resulting in a grinding wheel that provides maximum performance, raised productivity and reduced process costs.
Through research and development, Winter has created a new type of grinding wheel called CarbonForce. CarbonForce uses a lightweight carbon fiber reinforced polymer core, offering higher strength than steel but lower weight than aluminum. This provides a 75% weight reduction over steel-hubbed wheels. The lightweight wheels are easier for operators to handle and enable higher wheel speeds and productivity. They also improve surface finish, reduce costs, and increase machine life. CarbonForce is well-suited for applications like outer diameter grinding, centerless grinding, camshaft grinding, and gear grinding.
Deepak Jain has over 12 years of experience in finance, accounting, costing, budgeting and MIS. He currently works as the Manager of Plant Accounting and Finance at Carlsberg India Pvt. Ltd. in Alwar, Rajasthan. He has a CA certification from the Institute of Chartered Accountants of India and a B.Com degree. Previously he has worked at Axa Parenteral Limited and Hemma Herbs Pvt. Limited in various finance and accounting roles. He is proficient in ERP systems like SAP and Microsoft Office applications.
The survey of 63 employees of the Office of the Attorney General found that most commute from the Richmond area and drive alone. Two-thirds said they would be more likely to carpool if an emergency ride home program was available. Respondents were willing to drive up to four miles to join a carpool or vanpool and cited lack of flexibility as the primary reason for not currently using alternatives to driving alone. The emergency ride home program was seen as the largest motivating factor for switching to an alternative commute mode.
This document describes a problem-based learning (PBL) assignment for an Engineering Mathematics course at Bahrain Polytechnic that involves solving Archimedes' sphere and cylinder problem. The assignment aims to address various learning outcomes related to theoretical mathematics knowledge, practical skills, and problem-solving skills. Students are tasked with parameterizing the problem, calculating volumes using integration techniques, applying trigonometric identities and series expansions, and verifying the solution numerically and experimentally.
The document discusses spend under management (SUM) as an important organizational initiative that aims to bring 85% or more of an enterprise's total spending under active management. This can result in cost savings of 5-20% per dollar of new spend brought under management, translating to millions or even tens of millions in realized savings. SUM is more than just sourcing and considers factors like ensuring adherence to contracts, purchase order accuracy, demand management, and supplier performance management.
This report examines potential solutions to reduce single-occupancy vehicle commuting in the Richmond, Virginia region. It analyzes case studies of cash incentive programs for carpooling in Atlanta, Seattle, and Washington D.C. that provided financial compensation of $1-3 per trip. The report recommends that RideFinders apply for a grant to implement a two-to-three month pilot program in Richmond offering cash rewards of up to $50-75 per month for carpooling, modeled after successful programs that increased carpooling rates and ridership retention. Outreach to employers would promote the temporary incentive program aimed at encouraging more commuters to carpool instead of driving alone.
Velox Cabs is a radio taxi company located in and around Coimbatore, India that provides timely transportation services. The company plans to set up an office and parking area by renting 1900 square feet of space for Rs. 6,00,000 initially and Rs. 35,000 per month. Velox Cabs will operate in the growing radio taxi industry in India, which has an annual turnover of Rs. 1,100 crore and 35% annual growth. The company conducts a SWOT analysis and financial projections to establish a strong business model to take advantage of the increasing demand for reliable radio taxi services.
This document contains slides from a presentation on JavaScript fundamentals. It introduces JavaScript's core data types like numbers, strings, Booleans, objects and arrays. It also covers language features like functions, control structures, callbacks and custom objects. It includes examples and three coding exercises ("Labs") to practice working with ranges, vectors and callbacks in JavaScript.
The document discusses the Global Reporting Initiative (GRI) framework for sustainability reporting. It provides the following key details:
- GRI is an international independent standards organization that helps organizations report on their economic, environmental, and social impacts. Over 7,500 organizations use GRI guidelines for sustainability reports.
- The GRI framework provides a holistic approach to address broad social, environmental, and economic performance. It includes standard disclosures and indicators to measure and benchmark organizational impacts.
- Major Indian companies like Maruti Suzuki, Wipro, and others have adopted the GRI framework to report on their sustainability performance and impacts in areas like reducing environmental footprint, resource efficiency, and social initiatives.
This document discusses opportunities for rural growth and outlines a proposed research agenda. It identifies three types of rural regions and their main challenges. New technologies and business opportunities can provide rural dwellers with new sources of income if connectivity and skills are improved. The document proposes pulling together existing research findings, identifying rural assets like ecosystems services, and better communicating research to policymakers to help shape policy and investments that support rural growth. A phased approach is suggested starting with understanding contexts and potentials before establishing development strategies and addressing obstacles.
The document summarizes the current US policy and alternatives for addressing the Islamic State (ISIS) militant group. The US is leading a coalition to degrade and destroy ISIS through military airstrikes against ISIS targets in Iraq and Syria, training and equipping Iraqi and Kurdish forces, and disrupting ISIS's financing. However, the Obama administration refuses to coordinate with the Syrian regime. The US has conducted over 2,000 airstrikes and deployed 3,100 military personnel to train Iraqi forces. It is also providing weapons and aid to Kurdish peshmerga forces. The goal is to support local forces in retaking ISIS-controlled territory and limiting the group's resources and ability to operate
This document contains notes from a JavaScript fundamentals training covering topics like data types, variables, operators, control structures, objects, functions and more. It includes examples of JavaScript code and instructions for short coding exercises. The goal is to teach JavaScript language basics and get students writing their first programs.
report of industrial training done at MAKINO.
For over two decades, Makino Auto Industries Pvt. Ltd. has been the trusted name in the automotive industry. The company's product range of Automotive clutch assemblies, brake assemblies and components are amongst the category leaders in India and discerning markets of the world.
Established in 1990 Makino has 4 plants in India. Started as a Friction Disc manufacturer and now a complete clutch & Brake Solution Provider.
Experts of Automotive Clutches & Brakes (2W, 3W and 4W applications)
Working with major OEM in India for 2 W and 3 W applications
Vision is to provide technologically advanced clutches & brakes for existing and future vehicles.
"MAKINO is committed to consistently provide the Original Equipment Manufacturer and vehicle owner quality products.
50,000 m3 AAC Line Technical Introduction of Zhengzhou DEYIJimmy Ma
Zhengzhou Deyi Heavy Industrial Machinery Manufacturing Co., Ltd. is a Chinese manufacturer of equipment for new wall materials. It has over 100 production lines and manufactures large hydraulic brick-making machines, steam-pressing equipment, and aerated concrete equipment. It has grown to be a leader in wall machinery through product development, quality products, and efficient service. The document then provides details on Deyi's autoclaved aerated concrete production process and equipment for an annual output of 50,000 cubic meters. This includes information on material proportions, land and energy requirements, costs, and examples of international contracts signed.
Program Development of Cement Industry at Jamshoro, SindhRana Ahtisham
Cement manufacturing Process. Details of Machinery, Production Rate. Case Study of Zeal Pak Cement Industry at Hyderabad, Sindh. Special zoninf for cement industry
BAOFENG MMC is a medium-sized mechanical engineering company in Northeast China specializing in centrifugal alloy rolls and machines for rubber, plastics, oilseed, and paper processing industries. It has 326 staff dedicated to industrial work including new construction, expansion, and maintenance projects. Since 2001, BAOFENG MMC has delivered solid results for clients and remains at the forefront of new technologies and innovations in the industry.
The document summarizes Kuldeep Singh Rao's practical training presentation at Binani Cement Ltd in Binanigram, Sirohi, Rajasthan. It describes the cement manufacturing process including raw material extraction and preparation, kiln processing to form clinker, cement milling, and packaging. It also discusses the instrumentation used in the automated plant to measure and control parameters, including the distributed control system.
The document provides an overview of DTK Group of Industries' manufacturing facilities in Aurangabad and Pune, India. It details the company's vision, facilities, workforce, equipment, processes, quality systems, major customers, and products. Key points include: DTK has over 60,000 square feet of manufacturing space across four facilities, employs over 125 people, and has a wide range of pressing, welding, and machining equipment. The company aims to be a preferred supplier of sheet metal and machined components through continually upgrading its technology and processes.
This document summarizes several mobile concrete block machines. The NF-4A machine can produce up to 2,080 blocks per 8 hours, weighs 0.96 tons, and has dimensions of 1200x1200x1100 mm. It uses electric and hydraulic systems for an efficient production cycle. The NF-6A machine is larger, can produce 700-800 blocks per hour, weighs 2.6 tons, and can move automatically. It uses three-dimensional box excitation for high quality blocks. These machines are suitable for small and medium businesses due to their mobility, efficiency and relatively small investment required.
This document discusses ball mills and related topics. It includes presentations on ball mill operation and design, ball mill motor sizing, standard operating procedures for ball mills, and applications of ball mills in cement production and other industries. Links are provided to websites on ball mill suppliers and related information.
This document presents a case study on the implementation of Theory of Constraints (TOC) in a start-up firm that manufactures sheet metal and aluminum extrusions. The firm was facing challenges like slow throughput, high inventory, and incomplete orders. By applying TOC principles, modifications were made to machines to increase their capacity. This improved synchronization between automatic and manual machines, reduced operators requirements, and increased monthly production. As a result, throughput increased, costs reduced, and profit improved after implementing TOC.
The document introduces ball mills, which are energy-saving grinding machines used in mineral processing and other industries. It describes the structure, working principle, applications, features and technical parameters of ball mills. Ball mills grind material by rotating a cylinder with steel balls, causing them to fall back and impact the material to be ground. They are widely used to grind ores and other materials in mining and other industries.
OVERVIEW
Due to the growing number of cars and trucks worldwide, used tires are available in large quantities at a very low cost. With a little smart recycling, you can get a whole lot of used tires: granule in various sizes, steel and Profit. Sales revenue depends naturally on the quality of the output material a process that is as efficient as possible. PICCOLI has designed a system dedicated to tire recycling, which ultimately produces high quality materials for recycling. Final products can be fragments for thermal recycling, predominantly in the cement and rubber industry of approximately 5 mm
PICCOLI GREEN TECHNOLOGY , PICCOLI MOTORS , PGT GROUP
Clirik vertical roller grinding mill, vertical grinding mill for sale in africaShanghai Clirik Mahcinery
1. Clirik manufactures vertical roller grinding mills for grinding friable materials to fine powder between 5-74 microns. Their mills can grind over 100 materials efficiently in a single pass with classification.
2. Their vertical mills have several advantages over other mills including higher efficiency, longer lifespan with no wear parts, safer operation, and finer particle size control.
3. Clirik has been manufacturing these vertical mills for 8 years and they are suitable for grinding materials like dolomite, limestone, and barite to various finenesses depending on the model.
The latest r & d mica grinding machine with ceisoAmmy Cheng
The document provides information on the HGM series of mica grinding machines, including their applications, features, working principles, and specifications. Key points include:
- The machines can grind materials with Mohs hardness below 9 into powders between 325 and 2500 mesh. They are used in industries like paint, paper, rubber, and plastics.
- Features include high efficiency, long-lasting parts, safety, adjustable fineness between 325 and 2500 mesh, and environmentally-friendly operation.
- The working principle involves using a motor, reducer, rollers, and ring to grind materials conveyed by elevator into powder, which is then classified and collected.
The fine grinding mill has several advantages over other mills: it can grind materials to an average particle size of 5-74 microns while classifying them into a narrow size range within the same machine. There are no moving parts to wear out or generate heat, and no screens to plug. The mill is suitable for grinding over 100 types of friable or crystalline materials into very fine powder. It has passed international quality certifications and been exported worldwide.
Higher capacity calcite grinding machine with ceisoAmmy Cheng
This document summarizes the features and specifications of the HGM series of higher capacity calcite grinding machines. The machines can grind materials with a Mohs hardness of less than 9 to a fineness of 150-3000 mesh. Key features include high efficiency, long-lasting parts, safety and flexibility to adjust the fineness of materials ground. The machines also have low noise and dust pollution. Specifications for several models are provided including their dimensions, motor power and throughput capacities.
Intelligent PdM Horizontal Vibration Centrifuge-ALPHAKyle Lee
Alpha Intelligent PdM Centrifuge adopts sensing technology, the predictive maintenance of the centrifuge can be realized by embedding sensors in centrifuge, monitoring the equipment running status in real time and protecting the normal operation of the centrifuge by 7*24. Our machine is underground commissioning in factory, a new type of powerful solid-liquid separation equipment in CHPP.
This document provides an overview of Sadanand's 4-week industrial training at the Sheet Metal and Fabrication Shop of Lohia Corp. Limited. It begins with a brief history of Lohia Corp and an introduction to sheet metal. It then describes the key processes in the sheet metal department like shearing, punching, bending, and welding. Several CNC and manual machines used are outlined like the Amada VIPROS 255 CNC press, 340-ton bending press, MIG welding, drilling machines, and Makino A92 machine. The training concluded with Sadanand gaining engineering skills for sack machine production and learning about key production principles and the importance of workers.
This document discusses a limestone micro powder grinder. It begins by describing the grinding process, which involves crushing limestone into smaller pieces and then grinding it into a fine powder in a grinding chamber. It then lists the main equipment used in a limestone production line, including a main grinding unit, blower, classifiers, and other auxiliary equipment. Finally, it provides specifications for different models of limestone micro powder grinders and contact information for the company that manufactures them.
The wet pan mill is described as a new mill with small investment, high yield, and low production costs. It is suitable for selecting and grinding ores like iron ore, gold ore, and other metals. The wet pan mill uses rolling and grinding forces to crush ores into fine, high density products. It introduces ores, water, and grinding balls into the mill base and the materials are repeatedly crushed through rotation and rolling forces.
As rail track technology continues to make major advances, the requirement for abrasives in maintenance and repair operations is increasing. As a multi-solution provider, Saint-Gobain offers a number of abrasive products which comply with all European health, safety and environmental standards and are specially designed for cutting and grinding rail track and surrounding materials.
1. Sichuan Yaxi Machine
was at that time the
sole major professional
manufacturer of
rubber & plastic
machinery in
Southwest and
Northwest China,
appointed by the
Ministry of Machine-
Building Industry.
WHO WE ARE
ABOUT US
SICHUAN YAXI
RUBBER & PLASTIC
MACHINE CO., LTD
was founded in 1942.
It was nationalized in
1952 and directly
affiliated to Sichuan
Provincial Bureau of
Machine-Building
Industry as a state-
owned enterprise
(Class II) SINCE
1942
YAXI
MACHINE
2. Step by step…
72 years
experts enjoy the
special subsidy granted
by the State Council for
their outstanding
contributions.
We produce
every component
by ourselves…
Our registered capital is
8.5 million USD, while
the net asset is more
than 58 million USD
presently. The
occupation of land area is
about 130,000㎡㎡㎡㎡,
including 85,000㎡㎡㎡㎡
workshop area. Our sales
revenue is 53 million USD
in 2013.
We have a CAD
Technical Center and a
Measuring & Checking
Center. we are capable
of casting, forging,
pressing, mechanical
processing, heat-
treating and
assembling. We
produce every
component used in our
machine.
Now we have 625
workers and staffs,
including 153
engineers, technicians
and administrators, of
which 3
3. The company has a
complete
detecting/testing
procedure and perfect
quality control system
Our company has a 48-year
history of manufacturing
rubber machinery
Our region is rich in vanadium
titanium iron mine therefore
our roll has a higher wear
resistance
Sichuan Technical
Supervision Bureau
conferred on Yaxi
“Quality and
Reputation
Trustworthy
Enterprise” and
“Best Quality Prize”
We’re the National
Measurement
Qualified Unit (Class
II)
We have acquired Quality Management
System Certificate ISO9001
Testing Lab in Yaxi
QUALITY ASSURANCEQUALITY ASSURANCEQUALITY ASSURANCEQUALITY ASSURANCE
4. 10%
5%
60%
25%
Yaxi Machines have been exported to
Southeast Asia
Others
Africa, South AmericaIndia
Exporting Products
EXPORTING BUSINESS
Malaysia, Indonesia, Thailand, Vietnam
Japan, Australia
Nigeria, Egypt, Brazil, Colombia,
Argentina
Yaxi production line in Indian factory
5. Introduction of Products
1.Rubber mixing
production lines for
tire manufactures
2.Rubber mixing
production lines for
rubber hose and belt
3.Rubber mixing
production lines for
electric wire and
cable
4. Normal rubber
goods production
lines
1. XY-4S1800 high-
tension calendering
line applied for
coating and pasting
of nylon cord
2. Various calenders
including 2-roll, 3-roll
and 4-roll calenders
1. Various open
mixing mills, rubber
sheeting mills and
rubber warming
mills
(The diameter of
rolls ranges from
250mm to 710mm)
1.Powder making
equipment
2.Devulcanizing
equipment
3.Reclaiming
equipment
Equipment for rubber
mixing production
lines
Equipment for
Calendering
Production Lines
Various open mixing
mills, rubber sheeting
and warming mills
Equipment for Scrap
Tire Reclaiming
Production Line
Products and Service We Offer:
6. Two-Phase
Rubber Mixing
One-Phase
Rubber Mixing
• X(S)M-270/X(S)M-255E internal
mixer + 3 set XKY-660E1 +
batch off machine
• X(S)M-400 internal mixer +
Twin Screw Extruder + Batch-
off Machine
• Internal mixer + 6 set
• XK-660 open mixing mill
1. Equipment for Rubber Mixing Production Lines
1.1 Rubber mixing production lines for TIRETIRETIRETIRE manufactures
FeaturesFeaturesFeaturesFeatures:
1. Rotor type is tangential
4-wing (Banbury) or
ZZ2 rotor
2. Full hydraulic system
3. High voltage frequency
conversion
4. Dual output shaft hard-
gear reducer
11. SOLUTION
XN-75/30 pressurized
kneader
2 set XK-450 open mixing mill
XJ-600 8-roll cooling unit
1. Equipment for rubber mixing production lines
1.4 Rubber mixing production lines for NORMAL RUBBERNORMAL RUBBERNORMAL RUBBERNORMAL RUBBER GOODSGOODSGOODSGOODS manufactures
Features:Features:Features:Features:
1. Small land occupation
and less investment
2. Mixing chamber can
be hydraulically
overturned
Pressurized kneader is mostly applied to shoe manufacturers and other rubber product plant
12. SOLUTION
2.1 XY-4S1730 high-tension calendering system used for coating and
pasting of NYLON CORD
2. Equipment for Rubber Calendering Production Line
Rubber supplyRubber supplyRubber supplyRubber supply:
2 set XKR-660A1 warming mill + 2 set XKR-660B1 warming mill
(A1 means the rear roll is ¼ fluted; B1 means supplying rubber to
calender)
Up stream equipment:Up stream equipment:Up stream equipment:Up stream equipment:
Front let-off device, splicer, pull roll stand, festooner, vertical 8-roll
dryer, high-tension stand etc.
XY-4S1730 Calender
Down stream equipment:Down stream equipment:Down stream equipment:Down stream equipment:
Cooling unit, festooner, high-tension stand, wind-up unit
14. Calenders
• Vertical 2-roll calender
• Various 3-roll Calender with configuration of “I”
type, “L” type and “Γ” type
• Various 4-roll Calender with configuration of “S”
type
2. Calendering production line
2.2 Various calenders
Notes:
All the rolls of large 4-roll calenders are independently driven by a separate motor with DC converter
technology; The roll 1# and 4# have roll cambers, preloading device and axis-crossing device. The drive of
3-roll and 2-roll calenders adopts either DC converter technology or frequency control technology.
15. 3. Open mills, sheeting mills and warming mills
Various open mills, sheeting mills and warming mills
We offer various open mills, sheeting mills
and warming mills
The roll diameter ranges from 250250250250----710710710710mm (9”-28”)
16. 4. Equipment for Scrap Tire Reclaiming Production Line
4.1 Power making production line
1
• Bead Wire Remover TB1200Bead Wire Remover TB1200Bead Wire Remover TB1200Bead Wire Remover TB1200
to peel off bead wire completely from tires
2
• Tire Shredder LPTire Shredder LPTire Shredder LPTire Shredder LP----1200120012001200
to shred tires into pieces (About 100x150mm)
3
• Cracker ZKCCracker ZKCCracker ZKCCracker ZKC----560G560G560G560G
to crack/loosen the pieces in to crumbs (80mmx 80mm)
4
• Breaker XKPBreaker XKPBreaker XKPBreaker XKP----560G560G560G560G
to break/grind the crumbs into powder (26-30mesh)
5
• Magnetic SelectorMagnetic SelectorMagnetic SelectorMagnetic Selector
to separate the metal particles from steel tire powder
6
• Fiber SeparatorFiber SeparatorFiber SeparatorFiber Separator
to separate the thin fiber particles from nylon tire powder
18. OPTION
1
OPTION
2
• DynamicDynamicDynamicDynamic DevulcanizerDevulcanizerDevulcanizerDevulcanizer DTGDTGDTGDTG----ø1400x3000ø1400x3000ø1400x3000ø1400x3000
to devulcanize the scrap powder under high temperature
and high pressure
• Spiral-type Devulcanizer
to continuously devulcanize the scrap powder under high
temperature and normal pressure
4. Equipment for Scrap Tire Reclaiming Production Line
4.2 Devulcanizing Equipment
19. 4. Equipment for Scrap Tire Reclaiming Production Line
4.3 Reclaiming Equipment
1
• Mixing Mill XKMixing Mill XKMixing Mill XKMixing Mill XK----450450450450
to plasticate the devulcanized power and sheet it
2
• Open kneader XKNOpen kneader XKNOpen kneader XKNOpen kneader XKN----450450450450
to plasticate the devulcanized sheet at high speed ratio
3
• Open Kneader XKNOpen Kneader XKNOpen Kneader XKNOpen Kneader XKN----450450450450
to plasticate the devulcanized sheet at high speed ratio once again
4
• StrainerStrainerStrainerStrainer XJLXJLXJLXJL----200200200200
to purify the reclaimed rubber
5
• Refiner XKJRefiner XKJRefiner XKJRefiner XKJ----480480480480
to refine and sheet the reclaimed rubber (Then weigh and form it as final
reclaimed product.)
20. Leshan Giant Buddha
The Leshan Giant Buddha is
71 meters (233 feet) high,
reaching the peak of the hill.
His head is 14.7 meters
(48.2 feet) long and 10
meters (32.8) wide, with 7-
meter-long (23-foot-long)
ears each of which can hold
two persons inside.
Monkeys in Emei Mountain
Summer stream in Emei Moutain
WELCOME TO LESHAN
Emei mountain stretches
about 200 kilometers
from south to north, with
its main peak Golden
Summit which is 3,099
meters above sea level.
Since ancient times, Mt.
Emei has been famous
for its natural landscape
and Buddhism and
Taoism. The main scenic
spots on the mountain
include Baoguo Temple,
Wannian Temple, Fohu
Temple, Qingyin Pavilion,
Heilongjiang Tunnel,
Hongchun Platform,
Xianfeng Temple, Jiulao
Cave, and Xixiang Pond.
21. CONTACT US
Add: No. 128 Shengli Street, Niu Hua
Town, Wutongqiao District, Leshan City,
Sichuan Province, P.R.China
Overseas Business Department:Overseas Business Department:Overseas Business Department:Overseas Business Department:
Tel: 86-833-3208866
86-833-3206006
huzeyue07@163.com
Yifu.xie@gmail.com
minzelle@163.com
SINCE
1942
YAXI
MACHINE
THANK YOUTHANK YOUTHANK YOUTHANK YOU
Welcome to
Sichuan Yaxi Rubber & Plastic
Machine Co., Ltd
YAXI
MACHINE
SINCE
1942