This document summarizes several mobile concrete block machines. The NF-4A machine can produce up to 2,080 blocks per 8 hours, weighs 0.96 tons, and has dimensions of 1200x1200x1100 mm. It uses electric and hydraulic systems for an efficient production cycle. The NF-6A machine is larger, can produce 700-800 blocks per hour, weighs 2.6 tons, and can move automatically. It uses three-dimensional box excitation for high quality blocks. These machines are suitable for small and medium businesses due to their mobility, efficiency and relatively small investment required.

1. Mobile Concrete Block Machine
1.Capacity: 2,080 PCS/8H (Brick size: 390*190*190 MM).
2.Host Machine Power: 3.75 KW
3.Weight: 0.96 T
4.Exterior Size: 1200*1200*1100 MM
5.Certificate: ISO9001: 2008 & CE
Introduction
This machine can suit for, Especially small and medium-sized enterprises and
individuals to use, small investment, quick results.It is a compact machine with
electric and hydraulic system,each procedure action locks with each other to
guarantee the machine operate safely,easily and dependably.Through moldreleasing oil cyclinder,the mold box was locked into the vibration table with high
rigidity to reach the synchronous vibration,so that the concrete can be fluidified
and exhausted in two or three seconds to ensure the high-density,especially
suitable to produce the standard blocks,which can be piled up immediately so that
the pallet investment can be saved directly.
NF-4A Small Manual Block Machine Main Technical Parameters
Overall dimension
1300*1500*1000mm
Hydraulic method
Mould vibration
Demold method
Hydraulic
Exciting power
28.6 KN
Excitation frequency
4500 r/min
Total power
5.95KW
Total mass
1000KG
Molding cycle
30(Second)
Molding
4 Pcs/mould(400*200*200/390*190*190 mm)
Capacity
2000~2600pcs/shift(8h)
Types of bricks can be
made
390*240*190/390*150*190/390*115*190/Customize

2. Raw material
Crushed stone, sand, cement, dust and coal fly ash,
cinder, slag, gangue, gravel, perlite, and other
industrial wastes.
First-rate After-service
★ Provide consultation services for customers, determine operational scales, and provide
factory-establishing plans.
★ Freely install, debug, and provide relevant technical training.
★ Strict carry out three guarantees (guaranteed quality, guaranteed quantity and
guaranteed repair), and so well technical consultation
★ Ensure spare parts and components available adequately and timely.
★ Mould Making and Accessories offered.
NF-6A Mobile Block Making Machine Main Technical Parameters
Overall dimension
5230*2300*5450mm
Hydraulic method
Mould vibration
Demold method
Hydraulic
Turning method
Hydraulic
Hydraulic system
pressure
8-20Mpa
Excitation frequency
3200Hz
Total power
12KW
Total mass
2600KG
Molding cycle
20S
Molding
6 Pcs/mould(400*200*200/390*190*190 mm)
Capacity
700-800Pcs/hour
Types of bricks
390*240*190/390*150*190/390*115*190/Customiz
e
Moving method
Automatically move and hydraulic steering
Excitation way
Three-dimensional box excitation
Raw material
Crushed stone, sand, cement, dust and coal fly
ash, cinder, slag, gangue, gravel, perlite, and
other industrial wastes.

3. Brief Introduction Main Technical Parameters
Overall dimension
3150*1800*2400mm
Demold method
Hydraulic
Turning method
Hydraulic
Hydraulic system
pressure
16-20Mpa
Excitation frequency
3200Hz
Total power
16KW
Total mass
4200KG
Molding cycle
10-15S
Molding
10 Pcs/mould(400*200*200/390*190*190 mm)
Capacity
2000-9000Pcs/hour
Types of bricks can be
made
390*240*190/390*190*190/390*115*190
All kinds of moulds can be made by
customers' drawings
Moving method
Automatically move and hydraulic steering
Excitation way
Three-dimensional box excitation
Raw material
Crushed stone, sand, cement, dust and coal fly
ash, cinder, slag, gangue, gravel, perlite, and
other industrial wastes.