The document is a 5-page curriculum vitae for Siegmund Sanchez that outlines his 13 years of experience in electrical engineering design for the oil and gas industry. It details his educational background, skills, work history, qualifications and references. He has worked as a senior electrical designer, freelance estimator, and instructor and has extensive experience with software like ETAP, AutoCAD, and PDMS.
Dear Brothers & Freshers;
This article is Specifically Prepared to Guide Indian Fresh Graduates of B.E/B TECH/DIPLOMA (Civil, Mechanical, Electrical, Instrumentation, and Chemical Engg) who are interested to get a Job & to develop Skills required to enter into EPC DESIGN INDUSTRY in Oil, Gas,Petrochemical & Power plant Projects as a Fresher.
Dear Brothers & Freshers;
This article is Specifically Prepared to Guide Indian Fresh Graduates of B.E/B TECH/DIPLOMA (Civil, Mechanical, Electrical, Instrumentation, and Chemical Engg) who are interested to get a Job & to develop Skills required to enter into EPC DESIGN INDUSTRY in Oil, Gas,Petrochemical & Power plant Projects as a Fresher.
We optimise productivity for materials handling through excellent service and innovative solutions, specialising in brownfields design and construct.
Established for 26 years in WA, a Pty Ltd company, and privately owned by two directors that are actively involved in the business and have worked in the iron ore industry for more than 20 years each.
We employ over 90 multi skilled engineering professional and trades technicians that are passionate about their work.
My target is to be employed by an organization for a Management Level post where the following would be applicable:
-Continuous development for my skills and capabilities based on periodic appraisal for my performance.
-Supporting my career path in conformity with the organizational strategy and objectives.
My previous and current professional experience to be considered:
-Facility Management
-Project Coordination (large scale projects)
-Pre-sales and Marketing (Enterprise Building Solutions: Security and Building Management)
-Building Management Systems (pre-sales, sales, engineering, commissioning and start-up)
-Academic Research (electro-magnetic waves)
Additional trainings/certificates/diplomas conducted:
-Project Management Professionals (PMP Certified-Project Management Institute PMI)
-Professional Diploma on Human Resources (Certificate Project: Planning for Establishing Honeywell Training and Development Academy)
-Leadership workshop (Honeywell Corporate)
-Six Sigma Green Belt Certificated (Certificate Project: Investigating Local Market for Enterprise Building Integrated Solutions "EBI" - Honeywell Corporate)
Looking forward to being short-listed for interviews by recruiters for one of the below working areas (willing to travel or relocate as needed):
-Facility Management
-Building Automation/Management and Integrated Systems
-Business Development Management (Sales and Marketing activities as needed)
-Project Management
I have total experience of 20+ years in the field of Construction and Project management of instrumentation projects with various reputed establishments. I was holding the post of Instrument Engineer with M/s. Daelim Saudi Arabia Co. Ltd. (EPC) Saudi Arabia, till May2016.
During the course of my tenure, I have developed high level of Managerial and Technical proficiency by working with highly reputed establishments in various countries
We optimise productivity for materials handling through excellent service and innovative solutions, specialising in brownfields design and construct.
Established for 26 years in WA, a Pty Ltd company, and privately owned by two directors that are actively involved in the business and have worked in the iron ore industry for more than 20 years each.
We employ over 90 multi skilled engineering professional and trades technicians that are passionate about their work.
My target is to be employed by an organization for a Management Level post where the following would be applicable:
-Continuous development for my skills and capabilities based on periodic appraisal for my performance.
-Supporting my career path in conformity with the organizational strategy and objectives.
My previous and current professional experience to be considered:
-Facility Management
-Project Coordination (large scale projects)
-Pre-sales and Marketing (Enterprise Building Solutions: Security and Building Management)
-Building Management Systems (pre-sales, sales, engineering, commissioning and start-up)
-Academic Research (electro-magnetic waves)
Additional trainings/certificates/diplomas conducted:
-Project Management Professionals (PMP Certified-Project Management Institute PMI)
-Professional Diploma on Human Resources (Certificate Project: Planning for Establishing Honeywell Training and Development Academy)
-Leadership workshop (Honeywell Corporate)
-Six Sigma Green Belt Certificated (Certificate Project: Investigating Local Market for Enterprise Building Integrated Solutions "EBI" - Honeywell Corporate)
Looking forward to being short-listed for interviews by recruiters for one of the below working areas (willing to travel or relocate as needed):
-Facility Management
-Building Automation/Management and Integrated Systems
-Business Development Management (Sales and Marketing activities as needed)
-Project Management
I have total experience of 20+ years in the field of Construction and Project management of instrumentation projects with various reputed establishments. I was holding the post of Instrument Engineer with M/s. Daelim Saudi Arabia Co. Ltd. (EPC) Saudi Arabia, till May2016.
During the course of my tenure, I have developed high level of Managerial and Technical proficiency by working with highly reputed establishments in various countries
Inspection, Testing and Commissioning of Electrical Switchboards, Circuit Bre...Living Online
THE WORKSHOP:
Whether you are designing, specifying, installing, testing or commissioning electrical equipment from small to large commercial and industrial installations, you need to have a thorough understanding of switchboards, switchgear, circuit breakers and associated protective relays.
The overall focus of this workshop is on electrical inspection, testing and commissioning and will commence with a detailed examination of switchgear (and circuit breakers). Circuit breakers are critical components in electrical distribution systems and their operation significantly affects the overall operation of the system. Protection relays are then discussed. These are used in power systems to maximise continuity of supply and are found in both small and large power systems from generation, through transmission, distribution and utilisation of power in plant, industrial and commercial equipment.
We cover commissioning and periodic inspection of cables and their various failure modes and how to detect these faults. The often neglected topic of switchboards will be detailed next, followed by the interesting topic of interfacing to the control system (either PLC’s or other control devices).
Case studies and practical sessions are used throughout to illustrate key practical principles.
This workshop covers key elements in a practical and project focused way. Many people assume (wrongly) that inspecting, testing and commissioning is a fairly straightforward process and is simply a rubber stamp confirmation of a so-called outstanding design. Our experience in the field demonstrates quite the opposite; where the litany of problems ranges from design and installation errors to equipment manufacturing defects. It is best that these problems are identified and corrected before the inevitable downtime comes in an operational installation where many thousands of dollars are lost in correcting the faults. The situation today is made more challenging by the heightened safety requirements and interfacing to low powered electronic control and monitoring devices (such as PLC’s) using software that has to also be verified.
1. Curriculum Vitae Siegmund Sanchez
Page 1 of 4
Siegmund Sanchez, MIEAust
CAREER OVERVIEW
I am a resultdrivenprofessionalwith13years of experience in Electrical Engineeringdesign.Which
includes FrontEnd,Conceptual andDetail Design of anddocumentationin the Oil andGas industry.
My key skills and expertise include:
Can prepare Short circuit and Load flow calculation using SKMPower Tools or ETAP.
Can manually calculate short circuit currents.
ExcellentKnowledge of Protection Coordination and can develop Time Current Curves and by
use of ETAP or MS Excel.
Has Basic Knowledgeof Gasdetectionsystemshavingdone coordination with Instrumentation
engineers.
Familiar with Industry standards such as IEC, BS, IEEE, NFPA, SHELL DEP, AS/NZS 3000.
Can select Hazardous area Equipment in accordance to IECex, ATEX and/or AS/NZS 60079.
Cable sizing, UPS and battery sizing, Protective device selection, load schedules.
Detaileddesignof Single line diagrams,Motorcontrol Schematics,Cable routing layouts, Cable
tray layouts, Lighting layouts, Earthing layouts, Installation details, etc.
Lighting design with use software such as Dialux, Chalmlite and Luxicon as well manual
Calculations.
CAD software such as AutoCAD, Microstation, PDS, PDMS, Navisworks, Smart Plant review.
EDUCATION & QUALIFICATIONS
Professional EngineerMember(MemberNo.4623424) | 2015 - Present
Institutionof EngineersAustralia
Bachelor of Science inElectrical Engineering|1996-2000
Technological Institute of the Philippines
Professional Training
Electrical system Protection Coordination | Pamav Training Institute | www.pamavtech.com
Protective Relaying | Pamav Training Institute | www.pamavtech.com
Safety Training
BASIC OFFSHORE SAFETY INDUCTION AND EMERGENCY TRAINING (BOSIET)
Megamas Training Company | www.megamas.com
PERSONAL AND CONTACTDETAILS
Address: 3/14-16 HornbySt. BrightonEast,Victoria,Australia
Mobile: 0432337175
Email: engr_siegsanchez@yahoo.com;siegsanch@gmail.com
Eligibilitytowork inAustralia: AustralianPermanent Resident(VisaSub-Class189)
2. Curriculum Vitae Siegmund Sanchez
Page 2 of 4
HELICOPTER UNDERWATER ESCAPE TRAINING (HUET)
Megamas Training Company | www.megamas.com
PERMIT TO WORK FOR SUPERVISORS (PTW)
Megamas Training Company | www.megamas.com
COMPETENT FRONT LINE WORK SITE SUPERVISOR (IMS-5)
Megamas Training Company | www.megamas.com
ISSOW (INTEGRATED SAFE SYSTEMOF WORK)
Megamas Training Company | www.megamas.com
Computer skills
SOFTWARE Level of Expertise Years of Experience
ETAP Intermediate 3 years
SKM Power Tools Beginner 1 year
AutoCAD Advanced 12 years
Microstation Intermediate 4 years
MS Office (Word,Excel,Power
Point)
Advanced 15 years
DIALUX Advanced 5 years
CHAMLITE Advanced 8 years
AVEVA PDMS Advanced 8 years
NAVISWORKS Advanced 8 years
INTERGRAPH PDS Intermediate 1.5 years
SMART PLANT REVIEW Advanced 1.5 years
Memberships
ENGINEERS AUSTRALIA
INSTITUTE OF INTEGRATED ELECTRICAL ENGINEERS OF THE PHILIPPINES
WORK EXPERIENCE
FREELANCE ELECTRICAL ESTIMATOR | July 2016 – September 2016
Client:JCW ELECTRICAL | Bunbury, WA | www.jcwelectrical.com.au
JCW Electrical Groupprovidesindustrial,commercial &domesticmaintenanceandinstallationsfor
the Greater Bunbury& BusseltonRegions of WesternAustralia.
My Dutiesand Responsibilities:
ReportingtoEstimatingManager,Providesonline supportforcreationof quotes.
EstimatingMaterial andlabourquantitiesbyInterpretingdrawingsandspecificationsand
utilizingapplicable Australianstandardssuch asAS/NZS3000.
SENIOR ELECTRICAL DESIGNER | January 2009 – March 2016
Petrokon Utama Engineering Consultant | Kuala Belait, Brunei | www.pusbbrunei.com.bn
3. Curriculum Vitae Siegmund Sanchez
Page 3 of 4
PetrokonUtama SendirianBerhad (PUSB) isamulti-disciplineengineeringconsultancyestablishedin
Brunei DarussalaminJanuary1984 to provide designengineeringandproject management services
to the oil and gas, petrochemical and building industries.
My Dutiesand Responsibilities:
Preparation of Engineering documentations such as Load schedules, Cable sizing and
selection, Lighting Calculations, UPS and battery sizing calculations, Construction Scope of
work, Material Requisitions and Vendor Document Review.
Preparationof Shortcircuitand Load flow studies using SKMpower tools or ETAP as well as
manual calculations.
Conducting Electrical Systems Protection Coordination Study.
Performing Man-hour Estimates
Checking/Preparing of 2D Detail Design Drawings such as Single Line diagrams, Inter-
connection Wiring diagrams, Motor Control Schematic, Lighting Reticulation/Loop
Diagrams, Lighting Layouts, Cable Ladder/Tray & Cable Routing Layouts and Lightning and
Earthing Layouts.
PDMS Modelling & 2D extractions (Cable tray/Ladders, Supports & Equipment)
Performing Material take-off
ConductsWork Site Verification,as-builtandsurveyof existing and new Offshore /Onshore
facilities to gather information needed for the preparation of the design.
Provide in-house and on the job training to juniors and trainees as part of the competency
development program.
Achievements:
Leda teamof designersinthe successful completionsof TankGroup-27switchboard
replacementandNewElectrical &Control Building.
SuccessfullyProvidedEngineeringDocumentationanddesignwithinthe allottedMan-hours.
SENIOR ELECTRICAL DESIGNER | March 10, 2008 - December 20, 2008
MMC - Oil & Gas Engineering | Kuala Lumpur, Malaysia | www.mmcog.com
MMC Oil & Gas Engineering is a provider of complete engineering design services to the oil & gas
and petrochemical industries.
My Dutiesand Responsibilities:
Checking/preparingof Designof Single line diagrams,Inter-connectiondiagrams&Control
Schematics,Cable schedules,Lightinglayouts,CableLadder/Tray&Cable routinglayouts,
Earthing/Groundinglayouts, EquipmentLayouts, InstallationDetails.
MentoringJuniordesigners
PerformingMaterial Take-offs
PerformingLightingCalculations,CablesizingcalculationsandLoad schedules
3D ModellingwithAvevaPDMSwhichincludesResolvingClashesandattendingmodel
reviews.
Achievements:
Successfully provided accurate andtimelyengineeringdocumentationand designsaswell as
3D ModelingusingPDMS.
ELECTRICAL DESIGNER | January 2007 – February 2008
AKERSOLUTIONS Malaysia | Kuala Lumpur, Malaysia | www.akersolutions.com
4. Curriculum Vitae Siegmund Sanchez
Page 4 of 4
AkerSolutionsisaglobal providerof products, systems and services to the oil and gas industry. We
create solutions to unlock energy safely and sustainably for future generations.
Dutiesand Responsibilities:
Checking/preparingof Designof Single line diagrams,Inter-connectiondiagrams&Control
Schematics,Cable schedules, Lightinglayouts,CableLadder/Tray&Cable routinglayouts,
Earthing/Groundinglayouts, EquipmentLayouts,InstallationDetails
PerformingMaterial Take-offs
PerformingLightingCalculations,Cablesizingcalculations andLoadschedules
Achievements:
Successfullycontributedtothe companybyprovidingaccurate andtimelyengineering
documentationanddesigns..
ELECTRICAL DESIGNER | September 2005 - January 2007
FLUOR | Muntinlupa, Philippines | www.fluor.com
FluorCorporationisone of the world'sleadingpubliclytradedengineering,procurement,
construction,maintenance,andprojectmanagementcompanies.
Dutiesand Responsibilities:
Preparationof Single Line diagrams,Inter-connectiondiagrams&Control Schematics,Cable
Schedules, LightingLayouts,Cable Ladder/Tray&Cable RoutingLayouts,Earthing/Grounding
Layouts,InstallationDetails&EquipmentlayoutsusingMicrostation.
3D ModellingwithIntergraphPDSwhichincludesModellingelectrical Raceway,Resolving
Clashesandattendingmodel reviews.
PerformingLightingCalculations,Cablesizingcalculations,loadschedules.
Achievements:
Receivedthe SpotlightAwardformydedicationandcommitmenttothe DOW OL2K Project,
ELECTRICAL ENGINEER for FACILITIES | December 2004 – August 2005
Concepcion-Carrier Industries | Muntinlupa, Philippines | www.ccac.com.ph.
Dutiesand Responsibilities:
Planning,Designing,constructionsupervisionandMaintenance of BuildingandFacilities.
ELECTRICAL PROJECT ENGINEER | April 10, 2003 – December 17, 2004
S.C. Megaworld construction and development Corp. | Paranaque City, Philippines
Dutiesand Responsibilities:
Coordinatingdesignandconstructiononelectrical works,Preparingestimatesand
budgetarycoston electrical works,Requestandevaluatesproposalsfromsub-contractors,
Monitorand evaluate accomplishmentbyelectrical sub-contractor.
INSTRUCTOR FOR THE ELECTRICAL ENGINEERING DEPARTMENT | January 18, 2001 - May 23, 2003
Technological Institute of the Philippines | Manila, Philippines| www.tip.edu.ph
Dutiesand Responsibilities:
ConductsClassroom instructiononthe subjectsindicatedinhisofficial teachingloadforthe
semesterinaccordance withthe institutionstandardsandpolicies.
5. Curriculum Vitae Siegmund Sanchez
Page 5 of 4
PROFESSIONAL REFERENCES
JuliusCayaon
(formerColleague atAkerSolutions)
Estimator
CPE Switchboards,BibraLake,WestAustralia
0434881277
Francie Perolina
(formerColleague atAkerSolutions)
SeniorElectrical Engineer
Akersolutions(FormerEmployee),KualaLumpur
+639494604800
Felixberto Flores
(former Colleague at Petrokon Utama)
SeniorElectrical Engineer
PetrokonUtama,Brunei Darussalam
+673 8678014