Splashjet is leading manufacturer of inkjet ink offering range of products like Sublimation Ink, DTG Ink, Plotter Ink and Bulk inkjet Ink for a wide range of applications.
Wood Based Industries - Jagath Sawmill , HandapangodaTrishan Perera
Jagath Sawmill is located in Arakawila, Handapangoda, Kaluthara District and was established in 1987. It employs 20 workers with no prior training who work from 7:30am to 5pm. The manager has 6 years of experience in the sawmill industry and an A/L qualification in Commerce. The sawmill uses older technology and traditional methods to produce wood boards from local rubber trees as its main product. It reuses saw dust and mixing agents to minimize environmental impact. While it has experienced workers and sources local materials, the lack of new technology and trained staff present weaknesses.
Synthesis and characterisation of pvc pipe 2BADAL PANCHAL
This document summarizes a student project to modify PVC pipes to reduce noise from flowing water. The students' objectives were to increase pipe density and reduce friction between the water and pipe interior. They developed a new PVC pipe formulation, tested prototype pipes, and found their modified formulation reduced ash content and improved compression strength compared to a reference pipe. Their aim was to design a quieter pipe for carrying water.
Material specifications for rotomoulding powders are important because they provide information about properties that affect the molding process. These specifications include the melt flow index, dry flow rate, bulk density, and particle size distribution which influence how easily the powder will flow into all areas of the mold. Variations in these properties between batches of powder supplied can negatively impact the quality of molded parts by causing uneven wall thicknesses, gaps, and voids if not monitored. It is recommended to request and review certificates of analysis which specify these material properties for each batch received.
Frequently Asked Questions about Rotational MouldingFrancis Ward Ltd
Rotomoulding can be used to create thick-walled plastic products in a variety of sizes and materials. It is a versatile process that allows for complex shapes without seams or joints. While more expensive than blowmoulding for high volumes, rotomoulding is well-suited for low volume or customized parts due to relatively low setup costs. Proper design, material selection, and manufacturing techniques are keys to optimizing the strength and lifespan of rotomoulded products.
The document provides an overview of tissue machine operator training, focusing on crepe tissue production and the factors that influence creping. It discusses how increasing percent crepe through differences in yankee and reel speeds can improve sheet properties like bulk and softness. It also explains that coatings are applied to the yankee dryer to hold the sheet during creping and help build a good roll, while release aids facilitate sheet removal and influence properties. Common problems and methods for adjusting crepe, coatings and release aids to protect the dryer surface and meet sheet specifications are described.
Synthesis and characterisation of pvc pipeBADAL PANCHAL
This document summarizes a student project to modify the formulation of PVC pipes to reduce noise produced when water flows through them. The students visited a pipe manufacturing plant to obtain raw materials for their modified recipe. Their formulation adds calcium carbonate filler and wax to the standard PVC pipe ingredients. They tested the reference pipe and will test their new formulation. The goal is to reduce noise by increasing density and decreasing friction between the water and pipe walls.
Renishaw Ti6Al4V metal powder re-use studyLucy Grainger
There are various issues and concerns surrounding the re-use of metal powders through metal powder bed processes. This presentation discusses some of these issues and presents the latest results of a powder re-use study, in which a single batch of Ti6Al4V alloy powder was used over 38 routine builds. Chemistry and physical properties of the powder were assessed over the period of the study as well as tensile properties of built test bars.
Wood Based Industries - Jagath Sawmill , HandapangodaTrishan Perera
Jagath Sawmill is located in Arakawila, Handapangoda, Kaluthara District and was established in 1987. It employs 20 workers with no prior training who work from 7:30am to 5pm. The manager has 6 years of experience in the sawmill industry and an A/L qualification in Commerce. The sawmill uses older technology and traditional methods to produce wood boards from local rubber trees as its main product. It reuses saw dust and mixing agents to minimize environmental impact. While it has experienced workers and sources local materials, the lack of new technology and trained staff present weaknesses.
Synthesis and characterisation of pvc pipe 2BADAL PANCHAL
This document summarizes a student project to modify PVC pipes to reduce noise from flowing water. The students' objectives were to increase pipe density and reduce friction between the water and pipe interior. They developed a new PVC pipe formulation, tested prototype pipes, and found their modified formulation reduced ash content and improved compression strength compared to a reference pipe. Their aim was to design a quieter pipe for carrying water.
Material specifications for rotomoulding powders are important because they provide information about properties that affect the molding process. These specifications include the melt flow index, dry flow rate, bulk density, and particle size distribution which influence how easily the powder will flow into all areas of the mold. Variations in these properties between batches of powder supplied can negatively impact the quality of molded parts by causing uneven wall thicknesses, gaps, and voids if not monitored. It is recommended to request and review certificates of analysis which specify these material properties for each batch received.
Frequently Asked Questions about Rotational MouldingFrancis Ward Ltd
Rotomoulding can be used to create thick-walled plastic products in a variety of sizes and materials. It is a versatile process that allows for complex shapes without seams or joints. While more expensive than blowmoulding for high volumes, rotomoulding is well-suited for low volume or customized parts due to relatively low setup costs. Proper design, material selection, and manufacturing techniques are keys to optimizing the strength and lifespan of rotomoulded products.
The document provides an overview of tissue machine operator training, focusing on crepe tissue production and the factors that influence creping. It discusses how increasing percent crepe through differences in yankee and reel speeds can improve sheet properties like bulk and softness. It also explains that coatings are applied to the yankee dryer to hold the sheet during creping and help build a good roll, while release aids facilitate sheet removal and influence properties. Common problems and methods for adjusting crepe, coatings and release aids to protect the dryer surface and meet sheet specifications are described.
Synthesis and characterisation of pvc pipeBADAL PANCHAL
This document summarizes a student project to modify the formulation of PVC pipes to reduce noise produced when water flows through them. The students visited a pipe manufacturing plant to obtain raw materials for their modified recipe. Their formulation adds calcium carbonate filler and wax to the standard PVC pipe ingredients. They tested the reference pipe and will test their new formulation. The goal is to reduce noise by increasing density and decreasing friction between the water and pipe walls.
Renishaw Ti6Al4V metal powder re-use studyLucy Grainger
There are various issues and concerns surrounding the re-use of metal powders through metal powder bed processes. This presentation discusses some of these issues and presents the latest results of a powder re-use study, in which a single batch of Ti6Al4V alloy powder was used over 38 routine builds. Chemistry and physical properties of the powder were assessed over the period of the study as well as tensile properties of built test bars.
This product data sheet provides information on DX-5400, a high temperature resistant novolac epoxy coating and sealant. It is a 100% solids, solvent-free coating that offers chemical resistance to acids, caustics, and petroleum products. It can withstand continuous temperatures up to 450°F and intermittent temperatures up to 500°F. The product has a glossy finish, requires minimal surface preparation, and offers quick return to service within 24 hours at 77°F.
Testing equipments used in thermal spraying aluminium coatingAshwary Jain
This document discusses testing equipment used for thermal spraying aluminium coatings. It describes tests performed before blasting includes blotter tests and checking grit quality. After blasting, dust contamination, surface profile replica tape, salt contamination, and temperature/humidity tests are done. Additional tests after coating include dry film thickness measurement, adhesion testing using a pull-off tester, bend testing, and holiday detection by applying voltage to find defects. The tests help ensure proper surface preparation and coating quality.
PANSEAL is a unique epoxy coating formulated for corrosion protection of surfaces like cooling towers, storage tanks, and AHU drain pans. It seals leaks immediately, has a high-solids formula that is solvent-free and fire rated. PANSEAL bonds well to surfaces even under less than ideal conditions, provides excellent chemical resistance, and is suitable for uses like tank linings, pipeline coating, and corrosion protection of steel, concrete, and other materials. It offers properties like flexibility, adhesion, and resistance to chemicals, moisture, abrasion, and temperatures from -20 to 250 degrees Fahrenheit.
White paper - investigating the effects of multiple re-use of Ti6Al4V powder ...Lucy Grainger
- The document investigates the effects of repeatedly re-using Ti6Al4V metal powder in additive manufacturing builds over 38 total builds using a Renishaw AM250 system.
- Analysis found a small but steady increase in oxygen and nitrogen levels in the powder as builds increased, with oxygen levels exceeding specifications after around 16 builds. However, nitrogen levels remained within specifications.
- Physical properties of the powder like particle size distribution and flow were also affected, but the changes were minor and not expected to impact the manufacturing process or part quality.
- It was concluded that repeatedly re-using the powder up to 38 times did not significantly alter the powder properties or composition enough to require powder disposal under normal manufacturing conditions.
This document provides product data for SilverShield 5000X, a two-part epoxy coating with zinc flakes. It can be used indoors or outdoors to protect surfaces like pipes, tanks, and structural steel from corrosion. The coating has excellent adhesion and flexibility, provides a metallic silver finish, and protects in temperatures from -18 to 121 degrees Celsius. It is a 100% solids coating that is easy to apply by spray, brush, or roller in thicknesses between 4-12 mils.
This document provides information on a novolac epoxy paste called DURAPATCH that is designed for quickly patching, sealing, and repairing cracks, holes, and leaks. It can repair surfaces made of metal, plastic, fiberglass, and concrete. DURAPATCH cures within minutes, allowing for reduced downtime. It is suitable for field and machine shop repairs. The paste is self-priming, trowelable, sands and machines well, and has excellent bonding strength for many commercial and residential repairs. The kit contains resin, hardener, and a trowel for mixing and applying the product.
This document summarizes the properties and application of ELASTASEAL, a flexible epoxy coating designed for applications requiring high elongation. ELASTASEAL can tolerate expansion and contraction, adjusts to freeze-thaw cycles, and provides corrosion protection for surfaces like cooling towers, expansion joints, and concrete. It is a 100% solids, solvent-free coating that offers excellent adhesion and flexibility with elongation up to 300%. ELASTASEAL can be applied to surfaces like metal, concrete, wood, and geotextiles, and is suitable for uses like tank linings, secondary containment, and crack repair.
This document is the 2015 catalogue for Dongguan Rongxin Silicone Technology CO.,LTD. It describes the company's location, certifications, and various silicone and polyurethane products including mold making silicone rubbers, shoe sole silicone rubber, life casting silicone rubber, and electronic potting silicones. Product details such as characteristics, applications, curing properties, and packaging are provided.
Reelpower WC calibrated and certified linear measurement Testing Cables give you peace of mind and keep your customers happy with a quick and easy way to make sure that your measuring equipment is working accurately.
IPSA manufactures a pack of 50 pieces of 9 inch by 11 inch 220 grit water abrasive paper that is strong, durable, and made from high-quality materials to remove rust.
PIPESEAL is an epoxy paste designed to quickly seal cracks, holes, and leaks in pipes made of materials like copper, steel, lead, and cast iron. It hardens within 5 minutes when applied and heated with a heat gun. PIPESEAL is 100% solids with no VOCs, making it environmentally friendly. It can seal leaks up to 1/2 inch in diameter and withstand pressures over 1200 psi. To use, the resin and hardener must be thoroughly mixed together and applied to the leak, then heated to cure fully within minutes.
Gopani has a modern state-of-art facility where glass fibre filter cartridges are manufactured in a highly controlled environment. The cartridge filter is manufactured using the highest quality yarn, suitable core material and sturdy end-caps. Every glass fibre filter undergoes a thorough quality check before moving out of the facility. Gopani’s Clarywound GF catridge filters are extremely resistant to corrosive liquids and aggressive chemicals. The filter works like a dream for applications involving high temperature exposure, reactive chemicals and corrosive liquids.
PANSEAL Paste Grade is a two-component, no-VOC epoxy paste designed for steel tank repairs. It bonds well to steel, concrete, and other surfaces. It can seal cracks and leaks and is suitable for vertical and overhead applications due to its thick viscosity. PANSEAL Paste Grade dries hard in 8 hours at room temperature and can be topcoated within 14 days or machined after curing.
Anti setoff powders are used to create a gap between freshly printed sheets in order to ensure there is no ink transfer and to help the sheets dry a little faster. In addition, the powder improves the slide characteristics of the printing stock in the delivery and in postpress. But which tiny microscopic grains of powder are best suited to which applications?
Internship presentation at Fabrimax Engg Pvt Ltdabhishekgawande
This document summarizes an industry internship presentation by two mechanical engineering students at G.H. Raisoni College of Engineering. The presentation describes the fabrication processes at Fabrimax Engineering Pvt Ltd, where the students interned. It provides an overview of the company and its quality standards. Key fabrication processes like CNC cutting, three roller bending, and submerged metal arc welding are explained. Post-weld inspection techniques like dye penetrant testing, radiography testing, and ultrasonic testing are also summarized. A case study on using a robotic system for automatic ultrasonic weld inspection is presented to improve production quality and rates.
A spherical aluminum oxide abrasive is the best choice for polishing resins like polycarbonate and acrylic. Here's why. Learn more: http://nanophase.com/markets/optical-surface-polishing/
"Nano Alumina Slurries for Improved Polishing on Thermoset and Thermoplastic Resins" was presented by Abigail Hooper at Optifab 2015 in Rochester, NY.
Controlled experiments and trials have led to improved throughput and cost reduction in filter glass polishing. This presentation explores how to achieve a deterministic process to reduce variability in optical polishing. Learn more: http://nanophase.com/markets/optical-surface-polishing/
"Deterministic Polishing from Theory to Practice" was presented by Abigail Hooper at Optifab 2015 in Rochester, NY.
הדפסה תלת מימדית בטכנולוגיית SLA (סטריאוליטוגרפיה) במדפסות PROJET 6000-7000Caliber_Engineering
The document describes the ProJet® 6000/7000 Crossover 3D printers. It summarizes that the printers can achieve the highest levels of performance of SLA printers in-house with unmatched accuracy and precision, a range of high performing material choices, and fast build speeds. It provides details on the printers' accuracy within 15 microns, ability to produce fine features of 0.125mm, and use in precision medical and electronics parts. Graphs and images showcase speed tests showing part production in under 5 hours and throughput of over 40 parts per hour. The document also outlines the printers' material options, easy and fast job turnover and material changes, size options, accessory options like washers and software, and use in manufacturing production
This document describes two models of a Gardner impact tester: the IG-1120 and IG-1142. The IG-1120 tests the impact resistance of various coatings and materials and can exert forces from 80 to 160 inch-pounds. The IG-1142 was developed for evaluating materials that exceed the 160 inch-pound limit of the IG-1120, and can measure impact strength from 0 to 320 inch-pounds. Both devices use a falling weight to impact test samples and determine the point of failure visually or through a holiday detector. The document also provides contact information for the manufacturer.
Sukano is a Swiss-based company that produces masterbatch additives to enhance the performance of polyester and other resins. It has production sites in the Americas, Europe, and Asia Pacific. Sukano helps customers solve product and processing challenges through its edge technologies, materials expertise, customer-oriented solutions, and powerful R&D department. This results in excellent product performance, globally standardized quality, and increased competitiveness for customers.
Marking T Echnologies For Industrial MarketsMarkStillman
This document discusses marking technologies for industrial markets. It provides an overview of Matthews, a supplier of marking products with over 150 years of experience. The document then discusses the primary reasons for marking products as identification, traceability, compliance, and operational needs. It outlines common marking methods as printing, indenting, etching, and labeling/tagging. For each method, it provides examples and benefits. It concludes by advising readers to consider their specific application needs and production processes to determine the best marking method and source of additional information.
This document discusses marking technologies for industrial markets. It provides an overview of Matthews, a supplier of marking products with over 150 years of experience. The document then discusses the primary reasons for marking products as identification, traceability, compliance, and operational needs. It outlines common marking methods as printing, indenting, etching, and labeling/tagging. For each method, it provides examples and benefits. It stresses considering factors like the product, material, production needs, and intended usage to determine the best marking method for an application. It positions Matthews as an expert resource that can help evaluate marking processes.
This product data sheet provides information on DX-5400, a high temperature resistant novolac epoxy coating and sealant. It is a 100% solids, solvent-free coating that offers chemical resistance to acids, caustics, and petroleum products. It can withstand continuous temperatures up to 450°F and intermittent temperatures up to 500°F. The product has a glossy finish, requires minimal surface preparation, and offers quick return to service within 24 hours at 77°F.
Testing equipments used in thermal spraying aluminium coatingAshwary Jain
This document discusses testing equipment used for thermal spraying aluminium coatings. It describes tests performed before blasting includes blotter tests and checking grit quality. After blasting, dust contamination, surface profile replica tape, salt contamination, and temperature/humidity tests are done. Additional tests after coating include dry film thickness measurement, adhesion testing using a pull-off tester, bend testing, and holiday detection by applying voltage to find defects. The tests help ensure proper surface preparation and coating quality.
PANSEAL is a unique epoxy coating formulated for corrosion protection of surfaces like cooling towers, storage tanks, and AHU drain pans. It seals leaks immediately, has a high-solids formula that is solvent-free and fire rated. PANSEAL bonds well to surfaces even under less than ideal conditions, provides excellent chemical resistance, and is suitable for uses like tank linings, pipeline coating, and corrosion protection of steel, concrete, and other materials. It offers properties like flexibility, adhesion, and resistance to chemicals, moisture, abrasion, and temperatures from -20 to 250 degrees Fahrenheit.
White paper - investigating the effects of multiple re-use of Ti6Al4V powder ...Lucy Grainger
- The document investigates the effects of repeatedly re-using Ti6Al4V metal powder in additive manufacturing builds over 38 total builds using a Renishaw AM250 system.
- Analysis found a small but steady increase in oxygen and nitrogen levels in the powder as builds increased, with oxygen levels exceeding specifications after around 16 builds. However, nitrogen levels remained within specifications.
- Physical properties of the powder like particle size distribution and flow were also affected, but the changes were minor and not expected to impact the manufacturing process or part quality.
- It was concluded that repeatedly re-using the powder up to 38 times did not significantly alter the powder properties or composition enough to require powder disposal under normal manufacturing conditions.
This document provides product data for SilverShield 5000X, a two-part epoxy coating with zinc flakes. It can be used indoors or outdoors to protect surfaces like pipes, tanks, and structural steel from corrosion. The coating has excellent adhesion and flexibility, provides a metallic silver finish, and protects in temperatures from -18 to 121 degrees Celsius. It is a 100% solids coating that is easy to apply by spray, brush, or roller in thicknesses between 4-12 mils.
This document provides information on a novolac epoxy paste called DURAPATCH that is designed for quickly patching, sealing, and repairing cracks, holes, and leaks. It can repair surfaces made of metal, plastic, fiberglass, and concrete. DURAPATCH cures within minutes, allowing for reduced downtime. It is suitable for field and machine shop repairs. The paste is self-priming, trowelable, sands and machines well, and has excellent bonding strength for many commercial and residential repairs. The kit contains resin, hardener, and a trowel for mixing and applying the product.
This document summarizes the properties and application of ELASTASEAL, a flexible epoxy coating designed for applications requiring high elongation. ELASTASEAL can tolerate expansion and contraction, adjusts to freeze-thaw cycles, and provides corrosion protection for surfaces like cooling towers, expansion joints, and concrete. It is a 100% solids, solvent-free coating that offers excellent adhesion and flexibility with elongation up to 300%. ELASTASEAL can be applied to surfaces like metal, concrete, wood, and geotextiles, and is suitable for uses like tank linings, secondary containment, and crack repair.
This document is the 2015 catalogue for Dongguan Rongxin Silicone Technology CO.,LTD. It describes the company's location, certifications, and various silicone and polyurethane products including mold making silicone rubbers, shoe sole silicone rubber, life casting silicone rubber, and electronic potting silicones. Product details such as characteristics, applications, curing properties, and packaging are provided.
Reelpower WC calibrated and certified linear measurement Testing Cables give you peace of mind and keep your customers happy with a quick and easy way to make sure that your measuring equipment is working accurately.
IPSA manufactures a pack of 50 pieces of 9 inch by 11 inch 220 grit water abrasive paper that is strong, durable, and made from high-quality materials to remove rust.
PIPESEAL is an epoxy paste designed to quickly seal cracks, holes, and leaks in pipes made of materials like copper, steel, lead, and cast iron. It hardens within 5 minutes when applied and heated with a heat gun. PIPESEAL is 100% solids with no VOCs, making it environmentally friendly. It can seal leaks up to 1/2 inch in diameter and withstand pressures over 1200 psi. To use, the resin and hardener must be thoroughly mixed together and applied to the leak, then heated to cure fully within minutes.
Gopani has a modern state-of-art facility where glass fibre filter cartridges are manufactured in a highly controlled environment. The cartridge filter is manufactured using the highest quality yarn, suitable core material and sturdy end-caps. Every glass fibre filter undergoes a thorough quality check before moving out of the facility. Gopani’s Clarywound GF catridge filters are extremely resistant to corrosive liquids and aggressive chemicals. The filter works like a dream for applications involving high temperature exposure, reactive chemicals and corrosive liquids.
PANSEAL Paste Grade is a two-component, no-VOC epoxy paste designed for steel tank repairs. It bonds well to steel, concrete, and other surfaces. It can seal cracks and leaks and is suitable for vertical and overhead applications due to its thick viscosity. PANSEAL Paste Grade dries hard in 8 hours at room temperature and can be topcoated within 14 days or machined after curing.
Anti setoff powders are used to create a gap between freshly printed sheets in order to ensure there is no ink transfer and to help the sheets dry a little faster. In addition, the powder improves the slide characteristics of the printing stock in the delivery and in postpress. But which tiny microscopic grains of powder are best suited to which applications?
Internship presentation at Fabrimax Engg Pvt Ltdabhishekgawande
This document summarizes an industry internship presentation by two mechanical engineering students at G.H. Raisoni College of Engineering. The presentation describes the fabrication processes at Fabrimax Engineering Pvt Ltd, where the students interned. It provides an overview of the company and its quality standards. Key fabrication processes like CNC cutting, three roller bending, and submerged metal arc welding are explained. Post-weld inspection techniques like dye penetrant testing, radiography testing, and ultrasonic testing are also summarized. A case study on using a robotic system for automatic ultrasonic weld inspection is presented to improve production quality and rates.
A spherical aluminum oxide abrasive is the best choice for polishing resins like polycarbonate and acrylic. Here's why. Learn more: http://nanophase.com/markets/optical-surface-polishing/
"Nano Alumina Slurries for Improved Polishing on Thermoset and Thermoplastic Resins" was presented by Abigail Hooper at Optifab 2015 in Rochester, NY.
Controlled experiments and trials have led to improved throughput and cost reduction in filter glass polishing. This presentation explores how to achieve a deterministic process to reduce variability in optical polishing. Learn more: http://nanophase.com/markets/optical-surface-polishing/
"Deterministic Polishing from Theory to Practice" was presented by Abigail Hooper at Optifab 2015 in Rochester, NY.
הדפסה תלת מימדית בטכנולוגיית SLA (סטריאוליטוגרפיה) במדפסות PROJET 6000-7000Caliber_Engineering
The document describes the ProJet® 6000/7000 Crossover 3D printers. It summarizes that the printers can achieve the highest levels of performance of SLA printers in-house with unmatched accuracy and precision, a range of high performing material choices, and fast build speeds. It provides details on the printers' accuracy within 15 microns, ability to produce fine features of 0.125mm, and use in precision medical and electronics parts. Graphs and images showcase speed tests showing part production in under 5 hours and throughput of over 40 parts per hour. The document also outlines the printers' material options, easy and fast job turnover and material changes, size options, accessory options like washers and software, and use in manufacturing production
This document describes two models of a Gardner impact tester: the IG-1120 and IG-1142. The IG-1120 tests the impact resistance of various coatings and materials and can exert forces from 80 to 160 inch-pounds. The IG-1142 was developed for evaluating materials that exceed the 160 inch-pound limit of the IG-1120, and can measure impact strength from 0 to 320 inch-pounds. Both devices use a falling weight to impact test samples and determine the point of failure visually or through a holiday detector. The document also provides contact information for the manufacturer.
Sukano is a Swiss-based company that produces masterbatch additives to enhance the performance of polyester and other resins. It has production sites in the Americas, Europe, and Asia Pacific. Sukano helps customers solve product and processing challenges through its edge technologies, materials expertise, customer-oriented solutions, and powerful R&D department. This results in excellent product performance, globally standardized quality, and increased competitiveness for customers.
Marking T Echnologies For Industrial MarketsMarkStillman
This document discusses marking technologies for industrial markets. It provides an overview of Matthews, a supplier of marking products with over 150 years of experience. The document then discusses the primary reasons for marking products as identification, traceability, compliance, and operational needs. It outlines common marking methods as printing, indenting, etching, and labeling/tagging. For each method, it provides examples and benefits. It concludes by advising readers to consider their specific application needs and production processes to determine the best marking method and source of additional information.
This document discusses marking technologies for industrial markets. It provides an overview of Matthews, a supplier of marking products with over 150 years of experience. The document then discusses the primary reasons for marking products as identification, traceability, compliance, and operational needs. It outlines common marking methods as printing, indenting, etching, and labeling/tagging. For each method, it provides examples and benefits. It stresses considering factors like the product, material, production needs, and intended usage to determine the best marking method for an application. It positions Matthews as an expert resource that can help evaluate marking processes.
The document provides information about Fujifilm Sericol's solvent-based inkjet inks. It discusses that while Fujifilm aims to provide accurate technical information and recommendations, printing conditions can vary so users should test products for their own applications. It also mentions that Fujifilm's policy of continuous improvement may make some information outdated, so users should follow current recommendations.
Sublimation paper printer is an effective printing method that transfers high-quality, full-color information onto a variety of substrates. It is the process of solid ink converted into a gas without passing through a liquid state to result in vibrant and long-lasting prints. Here's a general introduction to paper printers.
Visit us: https://www.bpiae.com/product/sublimation-paper-printer/
From about the middle of last year, the consensus seemed to be that inkjet had finally attained the same quality as offset lithography or flexography. How has that consensus been reached when the areas that inkjet still finds difficult are things like large regions of mid-tone tints? You simply don’t see press vendors, or buyers, making such comparisons. Inkjet problem areas are mostly caused by non-uniformity at both the microscopic and macroscopic levels. Martin Bailey explores how these spatial variations can be remedied and discusses an emerging ISO Technical Specification (ISO TS 18621-21) that is designed to objectively characterise some of these types of variation.
Building an Inkjet Display Panel Printer with High PrecisionMeteor Inkjet Ltd
The document summarizes Meteor Electronics' capabilities for building an inkjet display panel printer with high precision. Key points include:
- Meteor offers modular printer architecture, production-ready printhead drivers, software, and tools to optimize waveforms, fluids, substrates for accurate drop placement.
- Parameters like drop size, velocity, placement accuracy are critical for display quality. Meteor helps optimize the printhead, waveform, fluid, and substrate system.
- Meteor provides drop observation equipment, waveform development services, and reliability testing to help customers develop inkjet processes for displays.
This document provides information about Syracuse Label & Surround Printing. It discusses that they have been in business since 1967 providing printed materials. They have grown to a multi-shift facility with 80 employees. They offer solutions like labels, packaging, and printing. They have various printing capabilities including flexographic, digital, and letterpress printing. They have quality control standards and occupy a 41,000 square foot building. The company strives for efficiencies through lean manufacturing and limited inventory.
Quimóvil is a manufacturer of flexographic, screen printing, and pad printing inks located near Barcelona, Spain. It has sales offices in Spain and exports worldwide, especially to South America, North Africa, the Middle East, and Europe. Quimóvil has certifications for quality and environmental management systems. It focuses on water-based inks with low VOCs that are suitable for various substrates like paper, film, and plastics. Quimóvil also provides auxiliary products, custom ink solutions, and technical support to customers.
PRA offers independent testing, analysis, and technical consultancy services for coatings and substrates. Their UKAS accredited laboratory tests a wide range of materials including paints, inks, adhesives, and plastics. They also provide technical consultancy, investigating coating failures, advising on best practices, and serving as expert witnesses. PRA works with businesses to develop new products, improve performance, and solve issues through analytical testing and formulation development.
Colorpoint Technology Co., Ltd. is a Taiwanese company established in 1998 that specializes in laser printer, copier toner, and inkjet cartridges. In 2005 it became a French-Taiwanese joint venture. It has locations in Taiwan, France, Netherlands, and China. Colorpoint aims to develop long-term partnerships through high-quality, innovative products and support. It manufactures a variety of printer consumables and components through research and development of new technologies. Colorpoint is committed to quality control and environmental protection practices in its manufacturing.
La nueva impresora gran formato ColorPainter M-64s, una impresora de inyección de tinta ecosolvente sin olor. Ofrece 64 " ( 1626 mm ) de ancho de impresión en 6 ( CMYK , Lc, Lm) o 7 colores ( CMYK , Lc, Lm , Gy ), con velocidades de hasta 716 pies cuadrados / h ( 66.5 sm / h ).
La capacidad de impresión de alta velocidad de la ColorPainter M-64s ha sido desarrollada específicamente para atender la creciente demanda de alta productividad del mercado de la impresión gráfica y la señalización.
Greenpack Inks and Coatings is a leading manufacturer of environmentally friendly inks and coatings for the graphics industry. They specialize in developing customized products that meet customers' unique needs. Their mission is to be a preferred supplier through continual improvements that exceed customer expectations. They pride themselves on having the cleanest products in the industry and achieving this through win-win partnerships with customers and suppliers.
This document is a product catalog from Finetone, a supplier of graphic art supplies, that was published in 2015. It provides information on Finetone's portfolio of consumables including inks, coatings, varnishes and other pressroom supplies. The catalog describes various ink series for different printing processes like sheetfed, heatset, coldset and UV printing. It also includes sections on pantone inks, metallic inks, overprint varnishes and why customers should choose Finetone for their printing needs.
This document discusses factors to consider when selecting a sublimation printer, including printing field size, number of ink colors, open vs closed ink systems, service and support options, and ink costs. It provides details on several printer models, such as the Ricoh SG 7100DN for high volume production with a 13" x 19" print field, and the Epson 7890/9890 which offer an 8 color system and large 24"-44" roll widths suitable for photo and apparel printing. Customer service and warranty coverage also vary between printer brands and models.
This document contains contact information for various Golcha Associated office locations in India, including addresses, phone numbers, and emails. It also provides a brief overview of Golcha Associated as a 130-year-old pioneer in talc mining in India with the largest single talc mine and an annual extraction volume of 300,000 MT. The document promotes Golcha Associated's excellence in talc mining, uncompromising values, unmatched innovation, unrivalled technology, unmatched quality, and unparalleled global network exporting to over 24 countries.
Size reduction and the importance of particle sizeUBMCanon
This document discusses size reduction and the importance of low particle size. It describes how micronization is the process of reducing materials to low micron and sub-micron sizes. This provides several benefits like higher surface area, tighter particle size distribution, more uniform and spherical shapes, and more predictable performance. The document then discusses different micronization applications in industries like pharmaceuticals, cosmetics, chemicals, foods and how micronized particles provide advantages for properties, reactions, and processing in these industries. It also provides an overview of micronizer equipment and operating principles.
The document discusses a paradigm shift in label printing using Epson's PrecisionCore print technology. It provides several benefits over traditional label printing methods:
- It offers high speeds up to 11.8 inches per second, high resolution of 600 x 1200 dpi, and uses an intelligent printhead.
- The technology ensures high quality printing through variable dot size and Epson DURABrite ink which provides excellent durability, scratch resistance, and fade resistance.
- The printer is designed for industrial use and reliability with features like an enclosed design, non-consumable printhead, and ability to print 20 million inches before major service being required.
LPC is a family owned printing company founded in 1898 that now operates in its fourth generation. They serve both domestic and international clients in various industries. LPC has expanded capacity by operating extended shifts and equipment to manage fluctuating demand. They have a wide range of pre-press, press, and bindery equipment and make ongoing investments to improve workflow and expand capabilities. LPC is committed to quality, sustainability, and adding value through services like design, reporting, and reviews. Their mission is to be the printer of choice by providing excellent quality, service, and competitive pricing to help customers succeed.
Company presentation dec 2012 bordeaux by print latPrintLAT
The document discusses Bordeaux Solutions, a company that produces inkjet inks. It provides an overview of the inkjet market and Bordeaux's product offerings, which include solvent-based, water-based, UV, and latex inks. It highlights Bordeaux's R&D process, global presence, and partnerships with OEMs to provide customized inkjet solutions.
Similar to Welcome to Splashjet – High Quality Inkjet Ink, DTG Ink, Sublimation Ink, Plotter Ink (20)
Structural Design Process: Step-by-Step Guide for BuildingsChandresh Chudasama
The structural design process is explained: Follow our step-by-step guide to understand building design intricacies and ensure structural integrity. Learn how to build wonderful buildings with the help of our detailed information. Learn how to create structures with durability and reliability and also gain insights on ways of managing structures.
buy old yahoo accounts buy yahoo accountsSusan Laney
As a business owner, I understand the importance of having a strong online presence and leveraging various digital platforms to reach and engage with your target audience. One often overlooked yet highly valuable asset in this regard is the humble Yahoo account. While many may perceive Yahoo as a relic of the past, the truth is that these accounts still hold immense potential for businesses of all sizes.
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Tastemy Pandit
Know what your zodiac sign says about your taste in food! Explore how the 12 zodiac signs influence your culinary preferences with insights from MyPandit. Dive into astrology and flavors!
Implicitly or explicitly all competing businesses employ a strategy to select a mix
of marketing resources. Formulating such competitive strategies fundamentally
involves recognizing relationships between elements of the marketing mix (e.g.,
price and product quality), as well as assessing competitive and market conditions
(i.e., industry structure in the language of economics).
How MJ Global Leads the Packaging Industry.pdfMJ Global
MJ Global's success in staying ahead of the curve in the packaging industry is a testament to its dedication to innovation, sustainability, and customer-centricity. By embracing technological advancements, leading in eco-friendly solutions, collaborating with industry leaders, and adapting to evolving consumer preferences, MJ Global continues to set new standards in the packaging sector.
Company Valuation webinar series - Tuesday, 4 June 2024FelixPerez547899
This session provided an update as to the latest valuation data in the UK and then delved into a discussion on the upcoming election and the impacts on valuation. We finished, as always with a Q&A
Discover timeless style with the 2022 Vintage Roman Numerals Men's Ring. Crafted from premium stainless steel, this 6mm wide ring embodies elegance and durability. Perfect as a gift, it seamlessly blends classic Roman numeral detailing with modern sophistication, making it an ideal accessory for any occasion.
https://rb.gy/usj1a2
Recruiting in the Digital Age: A Social Media MasterclassLuanWise
In this masterclass, presented at the Global HR Summit on 5th June 2024, Luan Wise explored the essential features of social media platforms that support talent acquisition, including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok.
The Evolution and Impact of OTT Platforms: A Deep Dive into the Future of Ent...ABHILASH DUTTA
This presentation provides a thorough examination of Over-the-Top (OTT) platforms, focusing on their development and substantial influence on the entertainment industry, with a particular emphasis on the Indian market.We begin with an introduction to OTT platforms, defining them as streaming services that deliver content directly over the internet, bypassing traditional broadcast channels. These platforms offer a variety of content, including movies, TV shows, and original productions, allowing users to access content on-demand across multiple devices.The historical context covers the early days of streaming, starting with Netflix's inception in 1997 as a DVD rental service and its transition to streaming in 2007. The presentation also highlights India's television journey, from the launch of Doordarshan in 1959 to the introduction of Direct-to-Home (DTH) satellite television in 2000, which expanded viewing choices and set the stage for the rise of OTT platforms like Big Flix, Ditto TV, Sony LIV, Hotstar, and Netflix. The business models of OTT platforms are explored in detail. Subscription Video on Demand (SVOD) models, exemplified by Netflix and Amazon Prime Video, offer unlimited content access for a monthly fee. Transactional Video on Demand (TVOD) models, like iTunes and Sky Box Office, allow users to pay for individual pieces of content. Advertising-Based Video on Demand (AVOD) models, such as YouTube and Facebook Watch, provide free content supported by advertisements. Hybrid models combine elements of SVOD and AVOD, offering flexibility to cater to diverse audience preferences.
Content acquisition strategies are also discussed, highlighting the dual approach of purchasing broadcasting rights for existing films and TV shows and investing in original content production. This section underscores the importance of a robust content library in attracting and retaining subscribers.The presentation addresses the challenges faced by OTT platforms, including the unpredictability of content acquisition and audience preferences. It emphasizes the difficulty of balancing content investment with returns in a competitive market, the high costs associated with marketing, and the need for continuous innovation and adaptation to stay relevant.
The impact of OTT platforms on the Bollywood film industry is significant. The competition for viewers has led to a decrease in cinema ticket sales, affecting the revenue of Bollywood films that traditionally rely on theatrical releases. Additionally, OTT platforms now pay less for film rights due to the uncertain success of films in cinemas.
Looking ahead, the future of OTT in India appears promising. The market is expected to grow by 20% annually, reaching a value of ₹1200 billion by the end of the decade. The increasing availability of affordable smartphones and internet access will drive this growth, making OTT platforms a primary source of entertainment for many viewers.
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.AnnySerafinaLove
This letter, written by Kellen Harkins, Course Director at Full Sail University, commends Anny Love's exemplary performance in the Video Sharing Platforms class. It highlights her dedication, willingness to challenge herself, and exceptional skills in production, editing, and marketing across various video platforms like YouTube, TikTok, and Instagram.
Building Your Employer Brand with Social MediaLuanWise
Presented at The Global HR Summit, 6th June 2024
In this keynote, Luan Wise will provide invaluable insights to elevate your employer brand on social media platforms including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok. You'll learn how compelling content can authentically showcase your company culture, values, and employee experiences to support your talent acquisition and retention objectives. Additionally, you'll understand the power of employee advocacy to amplify reach and engagement – helping to position your organization as an employer of choice in today's competitive talent landscape.
2. Manufacturer of Quality Inkjet Inks
• Established in 2006
• Dedicated 10 years of Inkjet
• Based in India, Nagpur City, Maharashtra State
Wide Range of Inkjet Inks
• Desktop Printer Inks
• Large Format Printer Inks
• Digital Textile Printing Inks
• Industrial Inkjet Inks
ISO 9001: 2008 QMS certified
ISO 14001: 2004 EMS certified
Splashjet – About Us
3. Product Range
Wide Range -
• Inks for Desktop Printers (SOHO + Photo)
• Inks for Large Format Printers (Photo + LFP + Plotters)
• Sublimation Inks for Transfer Printing
• Inks for Digital Textile Printing
• Inks for Industrial Inkjet Printers
Inks for Desktop Inks for Digital Textile Inks for Sublimation Inks for LFP
4. Product Range - I
Desktop Printer Inks
• Dye Base Inks
• Pigment Base Inks
• Sublimation Inks
Available For :
• Epson
• HP
• Canon
• Brother
• Ricoh
• Lexmark
5. Large Format Printer Inks
• Dye Base Inks
• Pigment Base Inks
• Sublimation Inks
Available For :
• Epson
• HP
• Canon
• Noritsu
• Fuji
• Mutoh
• Mimaki
• Roland
• Encad
Product Range - II
6. Product Range - III
Digital Textile Printing Inks
• Reactive Dye Inks
• Textile Pigment Inks
• Sublimation Inks
Available For :
• Epson
• Xaar
• Ricoh
• Konica Minolta
• Fuji Dimatix
• Panasonic
7. Product Range - IV
Specialty Inkjet Inks
• Digital Inkjet Press Inks
• Inkjet Label Press Inks
• Inkjet Engraver Inks
• Positive Inkjet Film Inks
• Custom Ink Development
* Images used for representation purpose only.
8. Why Splashjet ?
• High “Ink Reliability”
• “Ink Consistency”
• Continuous Improvement
• Infrastructure
• Good “Ink Manufacturing” Practices
• Team Splashjet
• Ethical & Responsible
• Application Support
9. Why Splashjet ?
Specialist in Aqueous
Inkjet Inks for last 10
years
Global Presence
Trusted OEM Partner
and Contract
Manufacturing
State of the Art
Product Development
Clean Room Production
Environment with
minimal Human
intervention
Stringent Quality
Control Procedures
Specific inks for
Industrial Print-heads
Assured Performance
Demanding
Applications
10+ YEARS GLOBAL PARTNER
R&D GMP
VERSATILE CONSISTENTASSURED
11. Pigment Stabilization -
Nano size particle grinding and stabilization technique is used to disperse pigment
particle in inks to ultrafine nano range. Specially developed stabilization
technology plays important role in formulating inks with excellent stability and
consistency.
Dye Purification Technology -
We use latest Reverse Osmosis Systems to obtain high purity dyes. These dyes
ensure excellent run-ability and long print head life. Especially for thermal
printers, low salt content is extremely important for print head performance.
Quality Formulations -
Inks are formulated specific to the application & printers. Formulations are
iterated 100s of times to achieve excellence in performance. In-house product
development technology helps us deliver application specific inks.
Nano Filtration -
This technique allows us to remove undesired particles from ink to ensure
contamination free product. All our inks are filtered through high quality
membrane filters removing all impurities from the inks.
Advanced Technology
13. Ink Consistency – A Glimpse
Viscosity ST D90
Batch 1 3.28 31.71 225.4
Batch 2 3.28 31.72 235.4
Batch 3 3.28 31.72 239.1
Batch 4 3.27 31.83 226.3
0
50
100
150
200
250
300
Values*
Ink Consistency Report
Sample data collected for production data with major raw material batch changes.
Viscosity measured by rotational viscometry, ST measured by DuNoy Ring Method and
Particle Size analyzed by Scattered Laser Diffraction Analysis