Weekly report week3
•Download as DOCX, PDF•
0 likes•121 views
The weekly report discusses progress on a multidisciplinary workshop project. It summarizes discussions from group meetings on customer needs and brainstorming home appliances. The group focused on designing a cooker hood, researching materials that don't absorb odors like aluminum and properties needed. Figures show a cooker hood design and interior. The report notes strong teamwork but some seniors taking long to conclude work. Next week the engineering team will present research for designing a real product.
Report
Share
Report
Share
![[INC 281 MULTIDISCIPLINARY WORKSHOP WEEKLY REPORT] January 26, 2012
Name-Surname Mr.prissada Chuachai
Student ID. 53211819
Group Name Bork-Korn=Thai
Engineering Golf(04),Champ(19),Bank(30),June(31)
Team Members
Product Design P’Duk-dik
P’Friend
Team Members P’Ake
P’Elle
Weekly Progress
For this week is third week for discussion in my group. We are meeting at KMUTT
(Bangkuntien).In the morning professor of architecture presentation about “Need”. It is
customer’s needs. In the afternoon, My group have brainstorm about appliances in the home at
the most comfortable. After that, In concussion be made about cooker hood. I have received from
senior about materials can be used to make kitchenware and the materials don’t absorb odors. I
had to find information about it. Most of the material it is made, It is aluminum because it is
flexible and it can bend up easily, smooth surface because if the rough surface will be at here by
oiliness and soot. Then it is difficult to clean. Internal devices. Withstand heat better, Non
corrosive. System internal will be knowledge of physics about internal air passages. It is subjects
dynamic. Fine all the information. Can be used as a reason to this project
Figure 1.Cooker hood Figure 2. Interiors
Engineering Analysis
Strong Point
- Teamwork
- Thinking logically
Week Point
- Senior use long time in the conclusion of work
- Careless
Next Week Job
Engineering Team will present, Obtaining from doing the research, To the Designing
Team and later deveiop the products intoreality
Department of Control System and Instrumentation Engineering
KING MONGKUT’s UNIVERSITY OF TECHNOLOGY THONBURI](https://image.slidesharecdn.com/weeklyreportweek3-120131113503-phpapp02/85/Weekly-report-week3-1-320.jpg)
Recommended
Inc 281 multidisciplinary workshop weekly report3
This weekly report summarizes the progress of the Bork-Korn=Thai engineering team. In the third week, the team met at KMUTT to discuss customer needs presented by an architecture professor. They brainstormed home appliance designs and decided to focus on a cooker hood. Research was done on suitable materials for the hood, focusing on aluminum for its flexibility and smooth surface for easy cleaning. Next steps include presenting research findings to the design team and developing the product. Figures 1 and 2 show a cooker hood interior as examples. The strong points of teamwork and logical thinking were noted, along with the weakness of seniors taking long times for conclusions.
Senior project
The document outlines the steps taken to build an electronics project, including drafting plans, gathering materials, measuring and cutting wood, piecing together and sealing a speaker box, assembling an acrylic box, adding legs, wiring components, and finishing and testing the completed project.
Shruti Kishor's resume
Architect proficient in CAD, SketchUp and Revit with some professional experience. Currently looking for full time positions in California.
Zionsville first street design development plans
The document contains contact information for VS Engineering Inc. including their address, email, phone number and fax. It also lists various street names and contains project codes and dates at the bottom of each page suggesting it is a engineering or surveying report with multiple pages detailing locations.
ICI magazine
Mr. Danny Lee is a 28-year-old structural engineer working in Kuala Lumpur. He has a degree from UTM and 3 years of experience working on construction sites. Some of the projects he has worked on include Residens 222 and Residens 228. As a structural engineer, he is responsible for ensuring buildings and structures can withstand loads like earthquakes and winds to maintain safety. The job requires long hours with little time off. It can also be difficult to find structural engineers due to the physical demands of working outdoors.
Matematicas blog
Este documento explica los conceptos básicos de los logaritmos, incluyendo sus definiciones, propiedades y tablas de valores. Explica que un logaritmo es el exponente a la base que hay que elevar para obtener un número dado, y que el antilogaritmo es el valor resultante. También describe las propiedades de los logaritmos como la suma y resta, y explica los conceptos de característica y mantisa de los logaritmos vulgares base 10.
Hamilton Resourcing Brochure
The document discusses talent retention services from Hamilton Resourcing and its partners. Hamilton Resourcing was founded in 2009 to provide talent management tools and services, including talent acquisition, development, and retention. One of its partners for talent retention services is The McQuaig Institute, founded in the 1960s, which has over 1200 company clients using its psychometric profiling tools to assess personality traits like attitude, motivation, and temperament that impact success. Another partner is Integrity International, which has specialized in defining and measuring integrity for over 20 years.
Tarjetas 4 b
Este documento describe las condiciones de uso de una tarjeta de crédito 4B Mastercard, incluyendo los límites diarios y semanales de compras y retiros de efectivo, las formas de pago, las comisiones por emisión de tarjetas, retiros de efectivo y compras, y los requisitos para obtener una tarjeta.
Recommended
Inc 281 multidisciplinary workshop weekly report3
This weekly report summarizes the progress of the Bork-Korn=Thai engineering team. In the third week, the team met at KMUTT to discuss customer needs presented by an architecture professor. They brainstormed home appliance designs and decided to focus on a cooker hood. Research was done on suitable materials for the hood, focusing on aluminum for its flexibility and smooth surface for easy cleaning. Next steps include presenting research findings to the design team and developing the product. Figures 1 and 2 show a cooker hood interior as examples. The strong points of teamwork and logical thinking were noted, along with the weakness of seniors taking long times for conclusions.
Senior project
The document outlines the steps taken to build an electronics project, including drafting plans, gathering materials, measuring and cutting wood, piecing together and sealing a speaker box, assembling an acrylic box, adding legs, wiring components, and finishing and testing the completed project.
Shruti Kishor's resume
Architect proficient in CAD, SketchUp and Revit with some professional experience. Currently looking for full time positions in California.
Zionsville first street design development plans
The document contains contact information for VS Engineering Inc. including their address, email, phone number and fax. It also lists various street names and contains project codes and dates at the bottom of each page suggesting it is a engineering or surveying report with multiple pages detailing locations.
ICI magazine
Mr. Danny Lee is a 28-year-old structural engineer working in Kuala Lumpur. He has a degree from UTM and 3 years of experience working on construction sites. Some of the projects he has worked on include Residens 222 and Residens 228. As a structural engineer, he is responsible for ensuring buildings and structures can withstand loads like earthquakes and winds to maintain safety. The job requires long hours with little time off. It can also be difficult to find structural engineers due to the physical demands of working outdoors.
Matematicas blog
Este documento explica los conceptos básicos de los logaritmos, incluyendo sus definiciones, propiedades y tablas de valores. Explica que un logaritmo es el exponente a la base que hay que elevar para obtener un número dado, y que el antilogaritmo es el valor resultante. También describe las propiedades de los logaritmos como la suma y resta, y explica los conceptos de característica y mantisa de los logaritmos vulgares base 10.
Hamilton Resourcing Brochure
The document discusses talent retention services from Hamilton Resourcing and its partners. Hamilton Resourcing was founded in 2009 to provide talent management tools and services, including talent acquisition, development, and retention. One of its partners for talent retention services is The McQuaig Institute, founded in the 1960s, which has over 1200 company clients using its psychometric profiling tools to assess personality traits like attitude, motivation, and temperament that impact success. Another partner is Integrity International, which has specialized in defining and measuring integrity for over 20 years.
Tarjetas 4 b
Este documento describe las condiciones de uso de una tarjeta de crédito 4B Mastercard, incluyendo los límites diarios y semanales de compras y retiros de efectivo, las formas de pago, las comisiones por emisión de tarjetas, retiros de efectivo y compras, y los requisitos para obtener una tarjeta.
Horario jornada escolar 2012
El documento presenta el horario de la jornada escolar de la Institución Educativa Gustavo Rojas Pinilla para el año 2012, con 6 periodos de 50 minutos cada día de lunes a viernes, y actividades adicionales los martes (dirección de curso) y viernes (eucaristía).
Acero
Este documento describe los beneficios del reciclaje de acero y cómo hacerlo. El acero es un material ampliamente utilizado que puede reciclarse indefinidamente. Reciclar acero reduce el consumo de energía y materias primas en un 70% y las emisiones de CO2 en una tonelada y media por cada tonelada reciclada. Los consumidores deben depositar los envases de acero limpios en el contenedor amarillo para su correcto reciclaje.
Planta1236
Este documento describe las principales partes de una planta: la raíz, que absorbe agua y nutrientes del suelo; el tallo, que soporta el resto de la planta; las hojas, donde ocurre la fotosíntesis; las flores, los órganos reproductivos; y el fruto, que contiene las semillas y se forma a partir del ovario una vez polinizadas las flores. Cada parte tiene funciones vitales para la supervivencia y reproducción de la planta.
Trabajo de informática mishell
Tu información personal como nombre, edad, lugar de nacimiento y dirección pueden ser usados para robar tu identidad o acosarte si los compartes en internet con personas que no conoces o confías. Es importante mantener la privacidad de datos personales sensibles como números de cuentas o tarjetas de crédito y no publicar fotos de estos documentos en línea.
Matematicas 6 c
El documento explica los conceptos básicos de interés simple. Define interés como el tanto por ciento sobre el capital durante un periodo de tiempo. Presenta las fórmulas para calcular el interés, capital y tasa de interés basado en los datos provistos. Incluye ejemplos para practicar cálculos de interés simple.
Making music esp_decoder
El documento presenta un acertijo en el que cada letra del alfabeto se corresponde con un número. Se deben sustituir las letras de varias palabras por los números correspondientes para descifrar mensajes relacionados con cantar y alabar al Señor.
Autonomía
El documento describe tres tipos de autonomía: autonomía emocional, que se refiere a cambios en las relaciones íntimas especialmente con los padres; autonomía conductual, que es la capacidad de tomar decisiones independientes y sostenerlas; y autonomía de valores, que es la capacidad de resistir presiones externas y tener un conjunto de principios sobre lo que es importante.
Incio de clases por grado
Este documento establece las condiciones básicas para las asignaturas de tecnología e informática para todos los grados. Entre las condiciones se incluyen el mantenimiento de una bitácora actualizada de todas las actividades académicas, la realización de proyectos cooperativos cada bimestre que integren todos los temas cubiertos, y la evaluación cualitativa y cuantitativa de todas las actividades según los saberes de saber, saber hacer y saber ser. Los estudiantes deben manifestar su acuerdo con estas condiciones para el
Taaaar9
El documento describe cómo la ideología neoliberal se ha infiltrado en el sentido común de las personas para presentar el sistema capitalista como el único mundo posible. Ha debilitado otras ideologías como el socialismo y promueve valores individualistas que benefician a las corporaciones. Además, ha despolitizado la esfera pública para reducir la ética y la justicia a las reglas del mercado en lugar de los principios democráticos.
1.7 acta junta de docentes
Este documento es el acta de una junta de docentes que incluye la asistencia de los maestros, un análisis del rendimiento académico de los estudiantes, informes del tutor, maestros e inspector, y resoluciones sobre estudiantes con bajo rendimiento y estimulos. Se discutieron temas como el rendimiento académico, comportamiento e informes del director, e identificaron estudiantes en riesgo o con problemas de comportamiento.
Armando ríos piter inauguró los trabajos de la reunión plenaria que se desarr...
El Coordinador de los Diputados Federales del PRD, Armando Ríos Piter inauguró los trabajos de la reunión plenaria que se desarrolla en el Puerto de Acapulco, con la presencia del Presidente Nacional del Partido, Jesús Zambrano; el Coordinador de los Senadores del PRD, Carlos Navarrete; el Presidente de la Mesa Directiva, Guadalupe Acosta Naranjo y el gobernador del Estado, Ángel Aguirre, donde el mandatario estatal agradeció el apoyo que Guerrero ha recibido por parte de los legisladores del Sol Azteca.
Linksverkehr-Schulungen von Sunny Cars.pdf
[PDF] Pressemitteilung: Pflicht für Mietwagen-Kunden: Zusatzqualifikation für Länder mit Linksverkehr - Sunny Cars mit kostenlosen Kursangeboten
[http://www.lifepr.de?boxid=155256]
53211808 weekly report
The weekly report summarizes the progress of an engineering student group from King Mongkut's University of Technology Thonburi. In the morning, the group discussed the architecture and final concept pattern for their mosquito detector product. In the afternoon, the engineering teams presented their final concepts to advisors. The strong point of the group's design was that the product design was clear and the panel selection was appropriate. The weak point was the limited time for discussions. Next week, the group will consult with teachers and learn about example internal products from Toshiba.
Weekly report 53211808
1. The weekly report summarizes progress on a multidisciplinary workshop project involving product design and engineering analysis.
2. It discusses learning how to use an Altium program for PCB boards and brainstorming project functions and ventilation information with architects.
3. The concepts focused on a fan that provides fresh air ventilation, but projects and core values were still uncertain, limiting engineering efficiency.
More Related Content
Viewers also liked
Horario jornada escolar 2012
El documento presenta el horario de la jornada escolar de la Institución Educativa Gustavo Rojas Pinilla para el año 2012, con 6 periodos de 50 minutos cada día de lunes a viernes, y actividades adicionales los martes (dirección de curso) y viernes (eucaristía).
Acero
Este documento describe los beneficios del reciclaje de acero y cómo hacerlo. El acero es un material ampliamente utilizado que puede reciclarse indefinidamente. Reciclar acero reduce el consumo de energía y materias primas en un 70% y las emisiones de CO2 en una tonelada y media por cada tonelada reciclada. Los consumidores deben depositar los envases de acero limpios en el contenedor amarillo para su correcto reciclaje.
Planta1236
Este documento describe las principales partes de una planta: la raíz, que absorbe agua y nutrientes del suelo; el tallo, que soporta el resto de la planta; las hojas, donde ocurre la fotosíntesis; las flores, los órganos reproductivos; y el fruto, que contiene las semillas y se forma a partir del ovario una vez polinizadas las flores. Cada parte tiene funciones vitales para la supervivencia y reproducción de la planta.
Trabajo de informática mishell
Tu información personal como nombre, edad, lugar de nacimiento y dirección pueden ser usados para robar tu identidad o acosarte si los compartes en internet con personas que no conoces o confías. Es importante mantener la privacidad de datos personales sensibles como números de cuentas o tarjetas de crédito y no publicar fotos de estos documentos en línea.
Matematicas 6 c
El documento explica los conceptos básicos de interés simple. Define interés como el tanto por ciento sobre el capital durante un periodo de tiempo. Presenta las fórmulas para calcular el interés, capital y tasa de interés basado en los datos provistos. Incluye ejemplos para practicar cálculos de interés simple.
Making music esp_decoder
El documento presenta un acertijo en el que cada letra del alfabeto se corresponde con un número. Se deben sustituir las letras de varias palabras por los números correspondientes para descifrar mensajes relacionados con cantar y alabar al Señor.
Autonomía
El documento describe tres tipos de autonomía: autonomía emocional, que se refiere a cambios en las relaciones íntimas especialmente con los padres; autonomía conductual, que es la capacidad de tomar decisiones independientes y sostenerlas; y autonomía de valores, que es la capacidad de resistir presiones externas y tener un conjunto de principios sobre lo que es importante.
Incio de clases por grado
Este documento establece las condiciones básicas para las asignaturas de tecnología e informática para todos los grados. Entre las condiciones se incluyen el mantenimiento de una bitácora actualizada de todas las actividades académicas, la realización de proyectos cooperativos cada bimestre que integren todos los temas cubiertos, y la evaluación cualitativa y cuantitativa de todas las actividades según los saberes de saber, saber hacer y saber ser. Los estudiantes deben manifestar su acuerdo con estas condiciones para el
Taaaar9
El documento describe cómo la ideología neoliberal se ha infiltrado en el sentido común de las personas para presentar el sistema capitalista como el único mundo posible. Ha debilitado otras ideologías como el socialismo y promueve valores individualistas que benefician a las corporaciones. Además, ha despolitizado la esfera pública para reducir la ética y la justicia a las reglas del mercado en lugar de los principios democráticos.
1.7 acta junta de docentes
Este documento es el acta de una junta de docentes que incluye la asistencia de los maestros, un análisis del rendimiento académico de los estudiantes, informes del tutor, maestros e inspector, y resoluciones sobre estudiantes con bajo rendimiento y estimulos. Se discutieron temas como el rendimiento académico, comportamiento e informes del director, e identificaron estudiantes en riesgo o con problemas de comportamiento.
Armando ríos piter inauguró los trabajos de la reunión plenaria que se desarr...
El Coordinador de los Diputados Federales del PRD, Armando Ríos Piter inauguró los trabajos de la reunión plenaria que se desarrolla en el Puerto de Acapulco, con la presencia del Presidente Nacional del Partido, Jesús Zambrano; el Coordinador de los Senadores del PRD, Carlos Navarrete; el Presidente de la Mesa Directiva, Guadalupe Acosta Naranjo y el gobernador del Estado, Ángel Aguirre, donde el mandatario estatal agradeció el apoyo que Guerrero ha recibido por parte de los legisladores del Sol Azteca.
Linksverkehr-Schulungen von Sunny Cars.pdf
[PDF] Pressemitteilung: Pflicht für Mietwagen-Kunden: Zusatzqualifikation für Länder mit Linksverkehr - Sunny Cars mit kostenlosen Kursangeboten
[http://www.lifepr.de?boxid=155256]
Viewers also liked (20)
Armando ríos piter inauguró los trabajos de la reunión plenaria que se desarr...
Armando ríos piter inauguró los trabajos de la reunión plenaria que se desarr...
Jugendmedienschutz und Social Media - Worauf Schulleitungen achten müssen
Jugendmedienschutz und Social Media - Worauf Schulleitungen achten müssen
Similar to Weekly report week3
53211808 weekly report
The weekly report summarizes the progress of an engineering student group from King Mongkut's University of Technology Thonburi. In the morning, the group discussed the architecture and final concept pattern for their mosquito detector product. In the afternoon, the engineering teams presented their final concepts to advisors. The strong point of the group's design was that the product design was clear and the panel selection was appropriate. The weak point was the limited time for discussions. Next week, the group will consult with teachers and learn about example internal products from Toshiba.
Weekly report 53211808
1. The weekly report summarizes progress on a multidisciplinary workshop project involving product design and engineering analysis.
2. It discusses learning how to use an Altium program for PCB boards and brainstorming project functions and ventilation information with architects.
3. The concepts focused on a fan that provides fresh air ventilation, but projects and core values were still uncertain, limiting engineering efficiency.
53211834 report week2
P'gong presented a table design called "Butterfly" that incorporated Feng Shui principles like a circular shape. The group discussed how to realize the product's functions. Later, teachers said the product was not approved and that Corekon and 3 other groups must combine projects. The group will discuss a new concept and product next week after being told to join with other groups.
15 march weekly template
This weekly report summarizes the progress of student group Habitทย. They met with advisors AJ from engineering and architecture to discuss feedback on their mosquito detector product. The advisors suggested simplifying the design by removing unnecessary parts like the LCD touch screen display. The group agreed to these changes and will test the revised design next week to demonstrate progress to teachers. In engineering analysis, the concept remained the same but design patterns changed quickly, making it hard for engineering to implement.
Weekly 22.03
This weekly report discusses progress on a student project group called Kid-wa Care pete fond lek dis ple wijak pop p’bell p’oat. The report discusses pressing a new button, modifying an architectural design to work with real features, and gathering project information for a step function report. It also notes strengths in making keys work and weaknesses in English grammar for writing reports. Next steps are to present the project.
weekly report2
This weekly report summarizes the progress of the Chot-Choei engineering team in their multidisciplinary workshop. The team discussed their product design with the industrial design student but did not receive clear direction. They then dismantled a damaged mobile phone to learn more about its internal components. Feedback from design teachers indicated the team's idea was good but the design needed improvement. The engineering analysis noted strong team relationships but identified delays from limited ideas and late arrivals. Their next steps are to present research findings to the design student and continue work once a concept is finalized.
Weekly report template march7
This weekly report summarizes the progress of a student group working on designing a mosquito killing machine. In the first week, the group determined their design would use stimulation like heat and UV light to attract mosquitoes into a fan system that would not allow them to escape. They discussed using UVA black light which has a long wavelength that does not damage DNA like UVB and UVC. In upcoming weeks, the group plans to learn how to produce CO2 as an attractant and further design the machine's functions, specifications, and patterns before building a prototype.
Weekly report template march7
This document contains a weekly report from a student working on a multidisciplinary workshop. The student is on a team designing a mosquito killing machine. In the past week, they determined the design would use UV light stimulation and a fan to pull mosquitoes into the machine where they cannot escape. They are considering using UVA black light which has a long wavelength and will not damage DNA like UVB and UVC. Next week, the team will learn how to make CO2 and further design the machine's functions, specifications, and patterns before building a real prototype.
Weekly report template 2
This weekly report summarizes the progress of a student design team working on two product concepts. The first concept was a machine for cooking and serving fast food, but designing it proved too complex and expensive. The second was an interactive food ordering display, but it did not meet user needs. For next week, the team will redesign their product to better address user requirements and create drawings of the new design. They will also research information to support the redesigned product.
26jan2012 jaturapat pakkawanit 532118042
1. The Engineering Team presented on using low-cost interactive whiteboards with the Wiimote to the Designing Team, though it only functioned at 80% due to remote control signal detection difficulties.
2. The Designing Team assigned tasks to research eliminating food smells, comparing energy usage of traditional vs modern stoves, non-absorbent materials, smoke spreading, and preserving charcoal smell with electric stoves.
3. Research found smoke rises to the ceiling then spreads horizontally in a "ceiling jet", flowing freely in flat or rough ceilings in radial channels.
Pornchanida Chinjantuek 26 01-12
The weekly report summarizes the progress of the KID-WA Company multidisciplinary workshop team. The engineering team researched potential new functionality and technology for electrical appliances and furniture designed for the next 2-3 years. They explored refrigerators that can order fresh food deliveries, offer recipe suggestions, and self-clean. Microwaves were also considered with a focus on functions that engage family members. The team's strong points were helping families spend more time together and saving cooking time, while their main weakness was a limited number of proposed functionalities to explore further. Next steps include presenting work summaries.
22 march 2012 weekly report 53211808
1) The weekly report summarizes the progress of the Habi Thai student group working on developing smart home products.
2) On the reported day, the engineering team presented their work on a mosquito counter and power supply circuit design to teachers, while the architecture team visited other sites.
3) In the evening, the engineering team tested their understanding of each other's roles and responsibilities within the group. The report identifies strong synchronization between subgroups but also challenges in communicating complex functions between them.
Apitorn
This weekly report summarizes the progress of the Habit Thai company engineering team. This week, the team learned basic PCB design using Altium software. They also discussed their ventilation product idea, researching wind properties and ventilation. Their main concept is to "make a good feeling" through ventilation. However, they realized a one-way ventilation system would not work and that good ventilation requires air flow in two directions. Next week, the team will share data about ventilation.
Report 281(1)
1) The document reports on a multidisciplinary engineering team's weekly progress.
2) It discusses the team learning about electronics and designing a chair with a lamp that turns on when someone presses a button and off when they sit down.
3) The engineering analysis identifies strong points like discussing product advantages/disadvantages, and weak points such as different ideas between architecture and engineering potentially limiting circuit design.
weekly report3
1) The student dismantled a damaged mobile phone to look inside its circuit and found the damaged component was the screen.
2) They discussed the project with an industrial design student but she did not provide many details. Engineering students decided to research new technologies similar to their project.
3) The industrial design student met with her teachers, who said her design was not as good as her idea and advised her to work with other groups.
Weekly report template2
This weekly report from an engineering student discusses their multidisciplinary workshop project focused on improving family relationships. Their team met with an architecture professor and expanded their membership. They began researching emotion technology and sensors that could detect movement and respond to heat as part of designing a product to encourage family bonding activities.
Weekly report template1
This weekly report summarizes the progress of the Habit Thai engineering team. The team met to discuss feedback from teachers on their initial product idea. They explored designing a product to detect mood by monitoring changes in body temperature when feelings like anger occur. The team members were assigned to research sensors that could detect mood for their product design. Strengths included diverse ideas from group members. An area for improvement was making their main idea more clear to avoid delays. Their next steps are to share more information and generate many design ideas from this project.
Weekly report template1
This weekly report summarizes the progress of the Habit Thai engineering team. The team met to discuss feedback from teachers on their initial product idea. They explored designing a product to detect mood by monitoring changes in body temperature when feelings like anger occur. The team members were assigned to research sensors that could detect mood for their product design. Strengths included diverse ideas from group members. An area for improvement was making their main idea more clear to avoid delays. Their next steps are to share more information and generate many design ideas from this project.
Weekly report template
This weekly report summarizes the progress of the Habit Thai engineering team. The team met to discuss feedback from teachers on their initial product idea. They explored designing a product to detect mood by monitoring changes in body temperature when feelings like anger occur. The team members were assigned to research sensors that could detect mood for their product design. Strengths included diverse ideas from group members. An area for improvement was making their main idea more clear to avoid delays. Their next steps are to share more information and generate many design ideas from this project.
Weekly report template
This weekly report summarizes the progress of the Habit Thai engineering team. The team met to discuss feedback from teachers on their initial product idea. They explored designing a product to detect mood by monitoring changes in body temperature when feelings like anger occur. The team members were assigned to research sensors that could detect mood for their product design. Strengths included diverse ideas from group members. An area for improvement was making their main idea more clear to avoid delays. Their next steps are to share more information and generate many design ideas from this project.
Similar to Weekly report week3 (20)
More from prissada_chuachai
Weekly report week9 5 4-55
The weekly report of the Bork-Kron-Thai engineering team describes their progress on a product design project. The team members are Mr. Prissada Chuachai, Golf, Champ, Bank, and June. They have been working on designs by P' Dookdik, P' Friend, P' Ake, and P' L. The report includes figures showing the team's work on a block diagram and other diagrams, with some errors encountered. It was submitted to the Department of Control System and Instrumentation Engineering at King Mongkut's University of Technology Thonburi.
Weekly report week9 5 4-55
The weekly report of the Bork-Kron-Thai engineering team describes their progress on a product design project. The team members are Mr. Prissada Chuachai, Golf, Champ, Bank, and June. They have been working on designs by P' Dookdik, P' Friend, P' Ake, and P' L. The report includes figures showing the team's work on a block diagram and other diagrams, with some errors encountered.
Weekly report week9 5 4-55
The weekly report of the Bork-Kron-Thai engineering team describes their progress on a product design project. The team members are Mr. Prissada Chuachai, Golf, Champ, Bank, and June. They have been working on designs by P' Dookdik, P' Friend, P' Ake, and P' L. The report includes figures showing the team's work on a block diagram and other diagrams, with some errors encountered.
Weekly report week9 5 4-55
The weekly report of the Bork-Kron-Thai engineering team describes their progress on a product design project. The team members are Mr. Prissada Chuachai, Golf, Champ, Bank, and June. They have been working on designs by P' Dookdik, P' Friend, P' Ake, and P' L. The report includes figures showing the team's work on a block diagram and other diagrams, with some errors encountered. It was submitted to the Department of Control System and Instrumentation Engineering at KING MONGKUT’s UNIVERSITY OF TECHNOLOGY THONBURI.
Weekly report week8 29 3-55
This weekly report summarizes the progress of the Bork-Kron-Thai engineering team. It discusses that the team members shared the work each person is doing, and that the author learned about triac and isolation circuits. The author designed two circuits using an MOC3041 optoisolator triac driver and a MAC4DHM triac device. Next week, the author plans to purchase devices and test circuits.
Weekly report week7fresh 21 3-55
This weekly report summarizes the progress of a student group working on an engineering project. In the past week, the group shared work responsibilities for researching an interface rice cooker. Experiments showed that a rice cooker heats rice to 100 degrees Celsius to prevent sticking, and increases temperature to 134-140 degrees Celsius to release steam. The group is working on a triac circuit to control three coils, using isolation to protect the microcontroller. Next week, they will integrate all rice cooker circuits and perform calculations.
Weekly report week5fresh
This weekly report summarizes the progress of a student group working on a rice cooker design project. The engineering team focused on developing the concept and block diagram for the rice cooker. They presented on the cooker's functions like cooking rice, frying, and keeping food warm. The report describes the rice cooker working at 140 degrees Celsius and using a sensor to measure temperature and control the heating coil. For next week, the group plans to define the control circuit for the rice cooker and use a microcontroller to operate other devices.
Weekly report week4
This weekly report summarizes the progress of an engineering student group tasked with designing a rice cooker. In the past week, the group researched the principles and critical components of rice cookers, including heat sources and temperature control systems. They found that rice cookers can transfer heat to rice faster than steaming. For their senior design project, the group wants the rice cooker to also make congee, but the student writing the report needs to learn more about moisture absorption. Their goals for next week are to research new rice cooker technologies and moisture absorption.
Weekly report template
The document is a weekly report from an engineering student. It summarizes the student's work in their multidisciplinary workshop group. In the morning, the student learned about electrical devices and different product designs. Their senior advisors said their initial product concept was not good and they should look for new ideas. For next week, the group will discuss improving their work concept and present their idea of a multi-touch whiteboard device.
Inc 281 multidisciplinary workshop 1
On Thursday, January 5th, the class was divided into groups to work on projects. The author's group was assigned to create a product that encourages people to drink more water and socialize. Each group presented their initial concepts, most related to preventing flooding. In the afternoon, the author's group visited booths at an expo to learn about different companies' products and design choices. Their assignment is to discuss next week whether they can design a product that meets the goals of their brief.
ความสามารถทางวิศวกรรม
This document contains a list of software and hardware components including Solidworks, Pspice, an induction motor, magnetic contractors, a relay, a timer and a breaker. Numbers are provided but no additional context is given to explain their purpose or relevance. The document provides a high-level listing of items but lacks essential details.
ความสามารถทางวิศวกรรม
This document lists various engineering software programs including Solidworks and Pspice. It also mentions components related to electrical engineering including electric motors, magnetic contractors, relays, timers and circuit breakers.
More from prissada_chuachai (12)
Recently uploaded
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
UiPath Test Automation using UiPath Test Suite series, part 5
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
Microsoft - Power Platform_G.Aspiotis.pdf
Revolutionizing Application Development
with AI-powered low-code, presentation by George Aspiotis, Sr. Partner Development Manager, Microsoft
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
Imagine a world where machines not only perform tasks but also learn, adapt, and make decisions. This is the promise of Artificial Intelligence (AI), a technology that's not just enhancing our lives but revolutionizing entire industries.
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.Recently uploaded (20)
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
UiPath Test Automation using UiPath Test Suite series, part 5
UiPath Test Automation using UiPath Test Suite series, part 5
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
Weekly report week3
- 1. [INC 281 MULTIDISCIPLINARY WORKSHOP WEEKLY REPORT] January 26, 2012 Name-Surname Mr.prissada Chuachai Student ID. 53211819 Group Name Bork-Korn=Thai Engineering Golf(04),Champ(19),Bank(30),June(31) Team Members Product Design P’Duk-dik P’Friend Team Members P’Ake P’Elle Weekly Progress For this week is third week for discussion in my group. We are meeting at KMUTT (Bangkuntien).In the morning professor of architecture presentation about “Need”. It is customer’s needs. In the afternoon, My group have brainstorm about appliances in the home at the most comfortable. After that, In concussion be made about cooker hood. I have received from senior about materials can be used to make kitchenware and the materials don’t absorb odors. I had to find information about it. Most of the material it is made, It is aluminum because it is flexible and it can bend up easily, smooth surface because if the rough surface will be at here by oiliness and soot. Then it is difficult to clean. Internal devices. Withstand heat better, Non corrosive. System internal will be knowledge of physics about internal air passages. It is subjects dynamic. Fine all the information. Can be used as a reason to this project Figure 1.Cooker hood Figure 2. Interiors Engineering Analysis Strong Point - Teamwork - Thinking logically Week Point - Senior use long time in the conclusion of work - Careless Next Week Job Engineering Team will present, Obtaining from doing the research, To the Designing Team and later deveiop the products intoreality Department of Control System and Instrumentation Engineering KING MONGKUT’s UNIVERSITY OF TECHNOLOGY THONBURI