1. The weekly report summarizes progress on a multidisciplinary workshop project involving product design and engineering analysis. 2. It discusses learning how to use an Altium program for PCB boards and brainstorming project functions and ventilation information with architects. 3. The concepts focused on a fan that provides fresh air ventilation, but projects and core values were still uncertain, limiting engineering efficiency.

1. [INC 281 MULTIDISCIPLINARY WORKSHOP WEEKLY REPORT] February 9, 2012
Name-Surname Mr.Noppakorn Rumrattana
Student ID. 53211808
Group Name Habitทย
Engineering Team Apitorn(Gang),Sopon(O),Marin(U),Weerawat(Chetoss)
Members Pongsakorn(Art)
Product Design P’Peet,P’Ice,P’Tae,P’Tuang
Team Members
Weekly Progress
Today I went to Bangkunthien,In the morning Aj Wuttichai assigned all students to learn about
how to use program altium that is program for made pcb board.
In the afternoon,I met the architect and interior in my group to discussion and brainstorming
about the projects and function that we wanted to use.My friend and I was assigned by architect
to find the information about ventilation of air and techonology that supported to make the
fan.The concepts in my group was “The fan that can ventilation and make fresh of air”.But it
made times so much to dispute about the projects that they decided to produce and the core
value that still uncertainly from achitect, so the engineering can’t do the full efficientcy that they
will be.
The information that I search is the ventilation of air,the working process of air will have the
fresh air that will always instead of polution air and temperature will be ambient
temperature.The ventilation of air that use in the room had 2 types was Negetive room and
Positive room.The negetive room will always have the problem about high temperature and bad
smell so this room will have filter to protect dust and insects in the inner air and will have
exhaust fan example of this room is kitchen and toilet. The positive room will have the problem
about dust example of this room is bedroom or clinic room so they will make the air pressure in
this room high than the outside. To make dust go to outside.
Figure 1. Negative room Figure 2. Positive room
Engineering Analysis
Strong Point
- They have the too much information supported to make projects
Week Point
- The uncertainly of products that we will make its.
Next Week Job
- I will give the information and help to decide to choose the one package that we will to do.
Department of Control System and Instrumentation Engineering
KING MONGKUT’s UNIVERSITY OF TECHNOLOGY THONBURI