This weekly report summarizes the progress of a student group working on a rice cooker design project. The engineering team focused on developing the concept and block diagram for the rice cooker. They presented on the cooker's functions like cooking rice, frying, and keeping food warm. The report describes the rice cooker working at 140 degrees Celsius and using a sensor to measure temperature and control the heating coil. For next week, the group plans to define the control circuit for the rice cooker and use a microcontroller to operate other devices.

1. [INC 281 MULTIDISCIPLINARY WORKSHOP WEEKLY REPORT] January 20, 2012
Name-Surname Mr.Prissada Chuachai
Student ID. 53211819
Group Name Bork-Kron-Thai
Engineering Team Golf,Champ,Bank,June
Members
Product Design P’ Dookdik , P’ Friend , P’Ake , P’ L
Team Members
Weekly Progress
This week, My group was sepasate between architecture team and
engineering team. Engineering group. Engineering Group has made the
concept of architecture that was done is Rice cooker. My group have a
prasent about block digarm, Specify function is 1. Cook rice 2. Fry 3.
Auntrip, shape of rice cooker and process of the Rice cooker. From
search information about principles. Rice cooker it working at
temperature 140 degree celsius. After the water evaporates out of the
pot, Higher temperature. The sensor measures the temperature off or
cut working of coil. System function Auntrip can set time of working
coil. So use device Timer and you can time set up 5-6 hour. In addition
to that, Circuit that use for control process of Rice cooker will define in
next week. And my group will use micro controller for control other
device. The last all device will design for storage in Rice cooker.
Figure 1. The rice cooker Figure 2. The steaming
Engineering Analysis
Strong Point
Department of Control System and Instrumentation Engineering
KING MONGKUT’s UNIVERSITY OF TECHNOLOGY THONBURI

2. [INC 281 MULTIDISCIPLINARY WORKSHOP WEEKLY REPORT] January 20, 2012
- check information of device
- Specify function clearly
Week Point
- Designer do not decide the produce and function. but engineering team is decide the
produce
- The device used to create rare.
Next Week Job
- My group will design circuit and shape of rice cooker
Department of Control System and Instrumentation Engineering
KING MONGKUT’s UNIVERSITY OF TECHNOLOGY THONBURI