[INC 281 MULTIDISCIPLINARY WORKSHOP WEEKLY REPORT]                    January 20, 2012

  Name-Surname         Mr.Prissada    Chuachai
      Student ID.      53211819
     Group Name        Bork-Kron-Thai
Engineering Team       Golf,Champ,Bank,June
        Members

   Product Design P’ Dookdik , P’ Friend , P’Ake , P’ L
   Team Members

Weekly Progress
   In the last week. My group share work of each a preson. I’m learning
about triac circuit and isolate circuit. I have designed 2 the circuit,
Calcilation, Choose the appropriate equipment with circuit. MOC3041 it
is Optoisolators Triac Driver Output. It works by light, Thereafter it
allows current to flow through and can withstand current and voltage at
higher. Internal components is 1.Anode 2.cathode 3.nc 4.main terminal
5.substrate don’t connect 6.main terminal.
     MAC4DHM it is Triac device. I search information about this device.
Sensitive Gate Triac. It can blocking voltageto 600 V. On-State current
rating of 4.0 Amperes RMS at 93 degree celsius and low level triggering
and holding characteristics. Nexy week, I will buy device and test circuit
for in order to use it.




          Figure 1. Triac    device                         Figure 2. Display interface

Engineering Analysis


                                     Department of Control System and Instrumentation Engineering
                                        KING MONGKUT’s UNIVERSITY OF TECHNOLOGY THONBURI
[INC 281 MULTIDISCIPLINARY WORKSHOP WEEKLY REPORT]               January 20, 2012

Strong Point
   - check information of device and find device follow store
   - Gather all the circuit of each a person
Week Point
  - The device used to create rare.

Next Week Job
   -   Next week,   We will buy device and test circuit for in order to use it.




                                 Department of Control System and Instrumentation Engineering
                                    KING MONGKUT’s UNIVERSITY OF TECHNOLOGY THONBURI

Weekly report week8 29 3-55

  • 1.
    [INC 281 MULTIDISCIPLINARYWORKSHOP WEEKLY REPORT] January 20, 2012 Name-Surname Mr.Prissada Chuachai Student ID. 53211819 Group Name Bork-Kron-Thai Engineering Team Golf,Champ,Bank,June Members Product Design P’ Dookdik , P’ Friend , P’Ake , P’ L Team Members Weekly Progress In the last week. My group share work of each a preson. I’m learning about triac circuit and isolate circuit. I have designed 2 the circuit, Calcilation, Choose the appropriate equipment with circuit. MOC3041 it is Optoisolators Triac Driver Output. It works by light, Thereafter it allows current to flow through and can withstand current and voltage at higher. Internal components is 1.Anode 2.cathode 3.nc 4.main terminal 5.substrate don’t connect 6.main terminal. MAC4DHM it is Triac device. I search information about this device. Sensitive Gate Triac. It can blocking voltageto 600 V. On-State current rating of 4.0 Amperes RMS at 93 degree celsius and low level triggering and holding characteristics. Nexy week, I will buy device and test circuit for in order to use it. Figure 1. Triac device Figure 2. Display interface Engineering Analysis Department of Control System and Instrumentation Engineering KING MONGKUT’s UNIVERSITY OF TECHNOLOGY THONBURI
  • 2.
    [INC 281 MULTIDISCIPLINARYWORKSHOP WEEKLY REPORT] January 20, 2012 Strong Point - check information of device and find device follow store - Gather all the circuit of each a person Week Point - The device used to create rare. Next Week Job - Next week, We will buy device and test circuit for in order to use it. Department of Control System and Instrumentation Engineering KING MONGKUT’s UNIVERSITY OF TECHNOLOGY THONBURI