Voice over IP is expected to be very promising application in the next generation communication networks. The objective of this paper is to analyse the VoIP performance among the most competing next generation wireless networks like WiMAX, WLAN and its integrated frameworks etc. WiMAX having higher bandwidth provides higher capacity but with degraded quality of service while WLAN provides low capacity and coverage. Hence, an integrated network using WiMAX backbone and WLAN hotspots has been developed and VoIP application has been setup. As OPNET 14.5.A provides a real life simulation environment, we have opted OPNET as the simulation platform for all performance studies in this work. Quality of the service is critically analysed with parameters like jitter, MOS and delay for various voice codecs in the aforesaid networks for both fixed and mobile scenario. Finally, it is observed and concluded that the WiMAX-WLAN integrated network provides improved and optimal performance over WLAN and WiMAX network with respect to network capacity and quality of service. Exhaustive simulation results have been provided.
Comparative Study for Performance Analysis of VOIP Codecs Over WLAN in Nonmob...Zac Darcy
Voice over IP (VoIP) applications such as Skype, Google Talk, and FaceTime are promising technologies for providing cheaper voice calls to end users over extant networks. Wireless networks such as WiMAX and Wi-Fi focus on providing perfection of service for VoIP. However, there are numerous aspects that affect quality of voice connections over wireless networks [13]. The adoption of Voice over Wireless Local Area Network is on tremendous increase due its relief, non-invasive, economicexpansion, low maintenance cost, universal coverage and basic roaming capabilities.
COMPARATIVE STUDY FOR PERFORMANCE ANALYSIS OF VOIP CODECS OVER WLAN IN NONMOB...Zac Darcy
Voice over IP (VoIP) applications such as Skype, Google Talk, and FaceTime are promising technologies for providing cheaper voice calls to end users over extant networks. ireless networks such as WiMAX and Wi-Fi focus on providing perfection of service for VoIP. However, there are numerous aspects that affect quality of voice connections over wireless networks [13]. The adoption of Voice over Wireless Local Area
Network is on tremendous increase due its relief, non-invasive, economicexpansion, low maintenance cost, universal coverage and basic roaming capabilities. However, expansion Voice over Internet Protocol (VoIP) over Wireless Local Area Network (WLAN) is a challenging task for many network specialist and engineers. Voice codec is one of the most critical components of a VoIP system. In this project, we evaluate
the performance analysis of various codecs such as G.711, G.723 and G.729 over Wi-Fi networks. NS2 WiFi
simulation models are designed. Performance metrics such as Mean Opinion Score (MOS), average
end-to-end latency, and disconcert are evaluated and discussed [13]. 1. In this paper, our area of interest is to compare and study the performance analysis of VoIP codecs in Non-mobility scenarios by changing some parameters and plotting the graphs throughput, End to end Delay, MOS, Packet delivery Ratio, and Jitter by using Network Simulator version.
2. In this paper we analyze the different performance parameters, Recent research has focused on simulation studies with non- mobility scenarios to analyze different VoIP codecs with nodes up to 5. We have simulated the different VoIP codecs in non-mobility scenario with nodes up to 300.
Comparative Study for Performance Analysis of VOIP Codecs Over WLAN in Nonmob...Zac Darcy
Voice over IP (VoIP) applications such as Skype, Google Talk, and FaceTime are promising technologies
for providing cheaper voice calls to end users over extant networks. Wireless networks such as WiMAX and
Wi-Fi focus on providing perfection of service for VoIP. However, there are numerous aspects that affect
quality of voice connections over wireless networks [13]. The adoption of Voice over Wireless Local Area
Network is on tremendous increase due its relief, non-invasive, economicexpansion, low maintenance cost,
universal coverage and basic roaming capabilities. However, expansion Voice over Internet Protocol
(VoIP) over Wireless Local Area Network (WLAN) is a challenging task for many network specialist and
engineers. Voice codec is one of the most critical components of a VoIP system. In this project, we evaluate
the performance analysis of various codecs such as G.711, G.723 and G.729 over Wi-Fi networks. NS2 WiFi simulation models are designed. Performance metrics such as Mean Opinion Score (MOS), average
end-to-end latency, and disconcert are evaluated and discussed [13].
1. In this paper, our area of interest is to compare and study the performance analysis of VoIP
codecs in Non-mobility scenarios by changing some parameters and plotting the graphs
throughput, End to end Delay, MOS, Packet delivery Ratio, and Jitter by using Network
Simulator version.
2. In this paper we analyze the different performance parameters, Recent research has focused on
simulation studies with non- mobility scenarios to analyze different VoIP codecs with nodes up to
5. We have simulated the different VoIP codecs in non-mobility scenario with nodes up to 300.
COMPARATIVE STUDY FOR PERFORMANCE ANALYSIS OF VOIP CODECS OVER WLAN IN NONMOB...Zac Darcy
The recent Voice over IP (VOIP) applications such as Skype, Google Talk, and Face Time have
changed the way people communicate to each other. Due to the low cost, people find VOIP as an
alternative to the expensive traditional Public Switched Telephone Network (PSTN). VOIP has
set of parameters that defined its Quality of Service (QoS) such as end to delay, jitter, packets
loss, Mean Opinion Score (MOS, and throughput[13]. The existing wireless networks such as WiFi offer flexibility to support such applications. At the time the IEEE 802.11 (Wi-Fi) technology
showed great success as cheap wireless internet access. The Motive of this survey paper is to
analyse of Qos in VOIP [13].
COMPARATIVE STUDY FOR PERFORMANCE ANALYSIS OF VOIP CODECS OVER WLAN IN NONMOB...Zac Darcy
Voice over IP (VoIP) applications such as Skype, Google Talk, and FaceTime are promising technologies
for providing cheaper voice calls to end users over extant networks. Wireless networks such as WiMAX and
Wi-Fi focus on providing perfection of service for VoIP. However, there are numerous aspects that affect
quality of voice connections over wireless networks [13]. The adoption of Voice over Wireless Local Area
Network is on tremendous increase due its relief, non-invasive, economicexpansion, low maintenance cost,
universal coverage and basic roaming capabilities. However, expansion Voice over Internet Protocol
(VoIP) over Wireless Local Area Network (WLAN) is a challenging task for many network specialist and
engineers. Voice codec is one of the most critical components of a VoIP system. In this project, we evaluate
the performance analysis of various codecs such as G.711, G.723 and G.729 over Wi-Fi networks. NS2 WiFi simulation models are designed. Performance metrics such as Mean Opinion Score (MOS), average
end-to-end latency, and disconcert are evaluated and discussed [13]
Comparative Study for Performance Analysis of VOIP Codecs Over WLAN in Nonmob...Zac Darcy
Voice over IP (VoIP) applications such as Skype, Google Talk, and FaceTime are promising technologies for providing cheaper voice calls to end users over extant networks. Wireless networks such as WiMAX and Wi-Fi focus on providing perfection of service for VoIP. However, there are numerous aspects that affect quality of voice connections over wireless networks [13]. The adoption of Voice over Wireless Local Area Network is on tremendous increase due its relief, non-invasive, economicexpansion, low maintenance cost, universal coverage and basic roaming capabilities.
COMPARATIVE STUDY FOR PERFORMANCE ANALYSIS OF VOIP CODECS OVER WLAN IN NONMOB...Zac Darcy
Voice over IP (VoIP) applications such as Skype, Google Talk, and FaceTime are promising technologies for providing cheaper voice calls to end users over extant networks. ireless networks such as WiMAX and Wi-Fi focus on providing perfection of service for VoIP. However, there are numerous aspects that affect quality of voice connections over wireless networks [13]. The adoption of Voice over Wireless Local Area
Network is on tremendous increase due its relief, non-invasive, economicexpansion, low maintenance cost, universal coverage and basic roaming capabilities. However, expansion Voice over Internet Protocol (VoIP) over Wireless Local Area Network (WLAN) is a challenging task for many network specialist and engineers. Voice codec is one of the most critical components of a VoIP system. In this project, we evaluate
the performance analysis of various codecs such as G.711, G.723 and G.729 over Wi-Fi networks. NS2 WiFi
simulation models are designed. Performance metrics such as Mean Opinion Score (MOS), average
end-to-end latency, and disconcert are evaluated and discussed [13]. 1. In this paper, our area of interest is to compare and study the performance analysis of VoIP codecs in Non-mobility scenarios by changing some parameters and plotting the graphs throughput, End to end Delay, MOS, Packet delivery Ratio, and Jitter by using Network Simulator version.
2. In this paper we analyze the different performance parameters, Recent research has focused on simulation studies with non- mobility scenarios to analyze different VoIP codecs with nodes up to 5. We have simulated the different VoIP codecs in non-mobility scenario with nodes up to 300.
Comparative Study for Performance Analysis of VOIP Codecs Over WLAN in Nonmob...Zac Darcy
Voice over IP (VoIP) applications such as Skype, Google Talk, and FaceTime are promising technologies
for providing cheaper voice calls to end users over extant networks. Wireless networks such as WiMAX and
Wi-Fi focus on providing perfection of service for VoIP. However, there are numerous aspects that affect
quality of voice connections over wireless networks [13]. The adoption of Voice over Wireless Local Area
Network is on tremendous increase due its relief, non-invasive, economicexpansion, low maintenance cost,
universal coverage and basic roaming capabilities. However, expansion Voice over Internet Protocol
(VoIP) over Wireless Local Area Network (WLAN) is a challenging task for many network specialist and
engineers. Voice codec is one of the most critical components of a VoIP system. In this project, we evaluate
the performance analysis of various codecs such as G.711, G.723 and G.729 over Wi-Fi networks. NS2 WiFi simulation models are designed. Performance metrics such as Mean Opinion Score (MOS), average
end-to-end latency, and disconcert are evaluated and discussed [13].
1. In this paper, our area of interest is to compare and study the performance analysis of VoIP
codecs in Non-mobility scenarios by changing some parameters and plotting the graphs
throughput, End to end Delay, MOS, Packet delivery Ratio, and Jitter by using Network
Simulator version.
2. In this paper we analyze the different performance parameters, Recent research has focused on
simulation studies with non- mobility scenarios to analyze different VoIP codecs with nodes up to
5. We have simulated the different VoIP codecs in non-mobility scenario with nodes up to 300.
COMPARATIVE STUDY FOR PERFORMANCE ANALYSIS OF VOIP CODECS OVER WLAN IN NONMOB...Zac Darcy
The recent Voice over IP (VOIP) applications such as Skype, Google Talk, and Face Time have
changed the way people communicate to each other. Due to the low cost, people find VOIP as an
alternative to the expensive traditional Public Switched Telephone Network (PSTN). VOIP has
set of parameters that defined its Quality of Service (QoS) such as end to delay, jitter, packets
loss, Mean Opinion Score (MOS, and throughput[13]. The existing wireless networks such as WiFi offer flexibility to support such applications. At the time the IEEE 802.11 (Wi-Fi) technology
showed great success as cheap wireless internet access. The Motive of this survey paper is to
analyse of Qos in VOIP [13].
COMPARATIVE STUDY FOR PERFORMANCE ANALYSIS OF VOIP CODECS OVER WLAN IN NONMOB...Zac Darcy
Voice over IP (VoIP) applications such as Skype, Google Talk, and FaceTime are promising technologies
for providing cheaper voice calls to end users over extant networks. Wireless networks such as WiMAX and
Wi-Fi focus on providing perfection of service for VoIP. However, there are numerous aspects that affect
quality of voice connections over wireless networks [13]. The adoption of Voice over Wireless Local Area
Network is on tremendous increase due its relief, non-invasive, economicexpansion, low maintenance cost,
universal coverage and basic roaming capabilities. However, expansion Voice over Internet Protocol
(VoIP) over Wireless Local Area Network (WLAN) is a challenging task for many network specialist and
engineers. Voice codec is one of the most critical components of a VoIP system. In this project, we evaluate
the performance analysis of various codecs such as G.711, G.723 and G.729 over Wi-Fi networks. NS2 WiFi simulation models are designed. Performance metrics such as Mean Opinion Score (MOS), average
end-to-end latency, and disconcert are evaluated and discussed [13]
Analysis of VoIP Traffic in WiMAX EnvironmentEditor IJMTER
Worldwide Interoperability for Microwave Access (WiMAX) is currently one of the
hottest technologies in wireless communication. It is a standard based on the IEEE 802.16 wireless
technology that provides a very high throughput broadband connections over long distances. In
parallel, Voice Over Internet Protocol (VoIP) is a new technology which provides access to voice
communication over internet protocol and hence it is becomes an alternative to public switched
telephone networks (PSTN) due to its capability of transmission of voice as packets over IP
networks. A lot of research has been done in analyzing the performances of VoIP traffic over
WiMAX network. In this paper we review the analysis carried out by several authors for the most
common VoIP codec’s which are G.711, G.723.1 and G.729 over a WiMAX network using various
service classes. The objective is to compare the results for different types of service classes with
respect to the QoS parameters such as throughput, average delay and average jitter.
PERFORMANCE EVALUATION OF OSPF AND RIP ON IPV4 & IPV6 TECHNOLOGY USING G.711 ...IJCNCJournal
Migration from IPv4 to IPv6 is still visibly slow, mainly because of the inherent cost involved in the implementation, hardware and software acquisition. However, there are many values IPv6 can bring to the
IP enabled environment as compared to IPv4, particularly for Voice Over Internet Protocol (VoIP) solutions. Many companies are drifting away from circuit based switching such as PSTN to packet based switching (VoIP) for collaboration. There are several factors determining the effective utilization and
quality of VoIP solutions. These include the choice of codec, echo control, packet loss, delay, delay variation (jitter), and the network topology. The network is basically the environment in which VoIP is deployed. State of art network design for VoIP technologies requires impeccable Interior Gateway routing
protocols that will reduce the convergence time of the network, in the event of a link failure. Choice of CODEC is also a main factor. Since most research work in this area did not consider a particular CODEC as a factor in determining performance, this paper will compare the behaviour of RIP and OSPF in IPv4
and IPv6 using G.711 CODEC with riverbed modeller17.5.
PERFORMANCE EVALUATION OF OSPF AND RIP ON IPV4 & IPV6 TECHNOLOGY USING G.711 ...IJCNCJournal
Migration from IPv4 to IPv6 is still visibly slow, mainly because of the inherent cost involved in the implementation, hardware and software acquisition. However, there are many values IPv6 can bring to the
IP enabled environment as compared to IPv4, particularly for Voice Over Internet Protocol (VoIP) solutions. Many companies are drifting away from circuit based switching such as PSTN to packet based switching (VoIP) for collaboration. There are several factors determining the effective utilization and
quality of VoIP solutions. These include the choice of codec, echo control, packet loss, delay, delay variation (jitter), and the network topology. The network is basically the environment in which VoIP is deployed. State of art network design for VoIP technologies requires impeccable Interior Gateway routing
protocols that will reduce the convergence time of the network, in the event of a link failure. Choice of CODEC is also a main factor. Since most research work in this area did not consider a particular CODEC as a factor in determining performance, this paper will compare the behaviour of RIP and OSPF in IPv4
and IPv6 using G.711 CODEC with riverbed modeller17.5.
This research work investigates and improves the performance of Voice over Internet Protocol (VoIP) traffic using IPV4 and IPV6 over WiMAX networks and the impact of various voice codec schemes and statistical distribution for Voice over Internet Protocol (VoIP) over WiMAX has been investigated in detail.
Comparative Analysis of Quality of Service for Various Service Classes in WiM...Editor IJCATR
Broadband access is an important requirement to satisfy user demands and support a new set of real time services and
applications. WiMAX, as a Broadband Wireless Access solution for Wireless Metropolitan Area Networks, covering large distances
with high throughput and is a promising technology for Next Generation Networks. Nevertheless, for the successful deployment of
WiMAX based solutions, Quality of Service (QoS) is a mandatory feature that must be supported. Quality of Service (QoS) is an
important consideration for supporting variety of applications that utilize the network resources. These applications include voice over
IP, multimedia services, like, video streaming, video conferencing etc. In this paper the performances of the MPEG-4 High quality
video traffic over a WiMAX network using various service classes has been investigated. To analyze the QoS parameters, the WiMAX
module developed based on popular network simulator NS-3 is used. Various parameters that determine QoS of real life usage
scenarios and traffic flows of applications is analyzed. The objective is to compare different types of service classes with respect to the
QoS parameters, such as, throughput, packet loss, average delay and average jitter.
Throughput Performance Analysis VOIP over LTEiosrjce
IOSR Journal of Electronics and Communication Engineering(IOSR-JECE) is a double blind peer reviewed International Journal that provides rapid publication (within a month) of articles in all areas of electronics and communication engineering and its applications. The journal welcomes publications of high quality papers on theoretical developments and practical applications in electronics and communication engineering. Original research papers, state-of-the-art reviews, and high quality technical notes are invited for publications.
Video steaming Throughput Performance Analysis over LTEiosrjce
IOSR Journal of Electronics and Communication Engineering(IOSR-JECE) is a double blind peer reviewed International Journal that provides rapid publication (within a month) of articles in all areas of electronics and communication engineering and its applications. The journal welcomes publications of high quality papers on theoretical developments and practical applications in electronics and communication engineering. Original research papers, state-of-the-art reviews, and high quality technical notes are invited for publications.
Comparisons of QoS in VoIP over WIMAX by Varying the Voice codes and Buffer sizeEditor IJCATR
Voice over Internet Protocol (VoIP) is developed for voice communications system based on voice packets transmitted over
IP network with real-time communications of voice across networks using the Internet protocols. Quality of Service (QoS) mechanism
is applied to guarantee successful voice packets transmitted over IP network with reduced delay or drop according to assigned priority
of voice packets. In this paper, the goal of simulation models is present to investigate the performance of VoIP codecs and buffer size
for improving quality of service (QoS) with the simulation results by using OPNET modeler version 14.5. The performance of the
proposed algorithm is analyzed and compared the quality of service for VoIP. The final simulated result shows that the VoIP service
performance best under G.729 voice encoder scheme and buffer size 256 Kb over WiMAX network.
Performance Evaluation of Interactive Video Streaming over WiMAX Network IJECEIAES
Nowadays, the desire of internet access and the need of digital encodings have influenced quite a large number of users to access high quality video application. Offering multimedia services not only to the wired but to wireless mobile client is becoming more viable. In wireless medium, videostreaming still has high resource requirements, for example, bandwidth, traffic priority, smooth play-backs. Therefore, bandwidth demands of these applications are far exceeding the capacity of 3G and Wireless Local Area Networks (LANs). The current research demonstrates the introductory understanding of the Worldwide Interoperability for Microwave Access (WiMax) network, applications, the mechanisms, its potential features, and techniques used to provide QoS in WiMAX, and lastly the network is simulated to report the diverse requirements of streamed video conferencing traffic and its specifications. For this purpose two input parameters of video traffic are selected, i.e, refresh rate, which is monitored in terms of frames per second and pixel resolutions which basically counts the number of pixels in digital imaging. The network model is developed in OPNET. Different outcomes from simulation based models are analyzed and appropriate reasons are also discussed. Apart from this, the second aim of the current research is to address whether WiMAX access technology for streaming video applications could provide comparable network performance to Asymmetric Digital Subscriber Line (ADSL). For this purpose network metrices such as End to End delay and throughput is taken into consideration for optimization.
Traffic Offloading Solutions: Femto, WiFi and Integrated Femto-WiFiShristi Pradhan
I provide a comprehensive overview on various traffic offloading solutions:
1. Femtocells, which provides the benefits of scalability, automatic configuration and self-optimization.
2. WiFi, widely available in homes and hotspots.
3. Integrating femto and WiFi together to reap the benefits of both femtocell and WiFi technology.
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
Analysis of VoIP Traffic in WiMAX EnvironmentEditor IJMTER
Worldwide Interoperability for Microwave Access (WiMAX) is currently one of the
hottest technologies in wireless communication. It is a standard based on the IEEE 802.16 wireless
technology that provides a very high throughput broadband connections over long distances. In
parallel, Voice Over Internet Protocol (VoIP) is a new technology which provides access to voice
communication over internet protocol and hence it is becomes an alternative to public switched
telephone networks (PSTN) due to its capability of transmission of voice as packets over IP
networks. A lot of research has been done in analyzing the performances of VoIP traffic over
WiMAX network. In this paper we review the analysis carried out by several authors for the most
common VoIP codec’s which are G.711, G.723.1 and G.729 over a WiMAX network using various
service classes. The objective is to compare the results for different types of service classes with
respect to the QoS parameters such as throughput, average delay and average jitter.
PERFORMANCE EVALUATION OF OSPF AND RIP ON IPV4 & IPV6 TECHNOLOGY USING G.711 ...IJCNCJournal
Migration from IPv4 to IPv6 is still visibly slow, mainly because of the inherent cost involved in the implementation, hardware and software acquisition. However, there are many values IPv6 can bring to the
IP enabled environment as compared to IPv4, particularly for Voice Over Internet Protocol (VoIP) solutions. Many companies are drifting away from circuit based switching such as PSTN to packet based switching (VoIP) for collaboration. There are several factors determining the effective utilization and
quality of VoIP solutions. These include the choice of codec, echo control, packet loss, delay, delay variation (jitter), and the network topology. The network is basically the environment in which VoIP is deployed. State of art network design for VoIP technologies requires impeccable Interior Gateway routing
protocols that will reduce the convergence time of the network, in the event of a link failure. Choice of CODEC is also a main factor. Since most research work in this area did not consider a particular CODEC as a factor in determining performance, this paper will compare the behaviour of RIP and OSPF in IPv4
and IPv6 using G.711 CODEC with riverbed modeller17.5.
PERFORMANCE EVALUATION OF OSPF AND RIP ON IPV4 & IPV6 TECHNOLOGY USING G.711 ...IJCNCJournal
Migration from IPv4 to IPv6 is still visibly slow, mainly because of the inherent cost involved in the implementation, hardware and software acquisition. However, there are many values IPv6 can bring to the
IP enabled environment as compared to IPv4, particularly for Voice Over Internet Protocol (VoIP) solutions. Many companies are drifting away from circuit based switching such as PSTN to packet based switching (VoIP) for collaboration. There are several factors determining the effective utilization and
quality of VoIP solutions. These include the choice of codec, echo control, packet loss, delay, delay variation (jitter), and the network topology. The network is basically the environment in which VoIP is deployed. State of art network design for VoIP technologies requires impeccable Interior Gateway routing
protocols that will reduce the convergence time of the network, in the event of a link failure. Choice of CODEC is also a main factor. Since most research work in this area did not consider a particular CODEC as a factor in determining performance, this paper will compare the behaviour of RIP and OSPF in IPv4
and IPv6 using G.711 CODEC with riverbed modeller17.5.
This research work investigates and improves the performance of Voice over Internet Protocol (VoIP) traffic using IPV4 and IPV6 over WiMAX networks and the impact of various voice codec schemes and statistical distribution for Voice over Internet Protocol (VoIP) over WiMAX has been investigated in detail.
Comparative Analysis of Quality of Service for Various Service Classes in WiM...Editor IJCATR
Broadband access is an important requirement to satisfy user demands and support a new set of real time services and
applications. WiMAX, as a Broadband Wireless Access solution for Wireless Metropolitan Area Networks, covering large distances
with high throughput and is a promising technology for Next Generation Networks. Nevertheless, for the successful deployment of
WiMAX based solutions, Quality of Service (QoS) is a mandatory feature that must be supported. Quality of Service (QoS) is an
important consideration for supporting variety of applications that utilize the network resources. These applications include voice over
IP, multimedia services, like, video streaming, video conferencing etc. In this paper the performances of the MPEG-4 High quality
video traffic over a WiMAX network using various service classes has been investigated. To analyze the QoS parameters, the WiMAX
module developed based on popular network simulator NS-3 is used. Various parameters that determine QoS of real life usage
scenarios and traffic flows of applications is analyzed. The objective is to compare different types of service classes with respect to the
QoS parameters, such as, throughput, packet loss, average delay and average jitter.
Throughput Performance Analysis VOIP over LTEiosrjce
IOSR Journal of Electronics and Communication Engineering(IOSR-JECE) is a double blind peer reviewed International Journal that provides rapid publication (within a month) of articles in all areas of electronics and communication engineering and its applications. The journal welcomes publications of high quality papers on theoretical developments and practical applications in electronics and communication engineering. Original research papers, state-of-the-art reviews, and high quality technical notes are invited for publications.
Video steaming Throughput Performance Analysis over LTEiosrjce
IOSR Journal of Electronics and Communication Engineering(IOSR-JECE) is a double blind peer reviewed International Journal that provides rapid publication (within a month) of articles in all areas of electronics and communication engineering and its applications. The journal welcomes publications of high quality papers on theoretical developments and practical applications in electronics and communication engineering. Original research papers, state-of-the-art reviews, and high quality technical notes are invited for publications.
Comparisons of QoS in VoIP over WIMAX by Varying the Voice codes and Buffer sizeEditor IJCATR
Voice over Internet Protocol (VoIP) is developed for voice communications system based on voice packets transmitted over
IP network with real-time communications of voice across networks using the Internet protocols. Quality of Service (QoS) mechanism
is applied to guarantee successful voice packets transmitted over IP network with reduced delay or drop according to assigned priority
of voice packets. In this paper, the goal of simulation models is present to investigate the performance of VoIP codecs and buffer size
for improving quality of service (QoS) with the simulation results by using OPNET modeler version 14.5. The performance of the
proposed algorithm is analyzed and compared the quality of service for VoIP. The final simulated result shows that the VoIP service
performance best under G.729 voice encoder scheme and buffer size 256 Kb over WiMAX network.
Performance Evaluation of Interactive Video Streaming over WiMAX Network IJECEIAES
Nowadays, the desire of internet access and the need of digital encodings have influenced quite a large number of users to access high quality video application. Offering multimedia services not only to the wired but to wireless mobile client is becoming more viable. In wireless medium, videostreaming still has high resource requirements, for example, bandwidth, traffic priority, smooth play-backs. Therefore, bandwidth demands of these applications are far exceeding the capacity of 3G and Wireless Local Area Networks (LANs). The current research demonstrates the introductory understanding of the Worldwide Interoperability for Microwave Access (WiMax) network, applications, the mechanisms, its potential features, and techniques used to provide QoS in WiMAX, and lastly the network is simulated to report the diverse requirements of streamed video conferencing traffic and its specifications. For this purpose two input parameters of video traffic are selected, i.e, refresh rate, which is monitored in terms of frames per second and pixel resolutions which basically counts the number of pixels in digital imaging. The network model is developed in OPNET. Different outcomes from simulation based models are analyzed and appropriate reasons are also discussed. Apart from this, the second aim of the current research is to address whether WiMAX access technology for streaming video applications could provide comparable network performance to Asymmetric Digital Subscriber Line (ADSL). For this purpose network metrices such as End to End delay and throughput is taken into consideration for optimization.
Traffic Offloading Solutions: Femto, WiFi and Integrated Femto-WiFiShristi Pradhan
I provide a comprehensive overview on various traffic offloading solutions:
1. Femtocells, which provides the benefits of scalability, automatic configuration and self-optimization.
2. WiFi, widely available in homes and hotspots.
3. Integrating femto and WiFi together to reap the benefits of both femtocell and WiFi technology.
Similar to VOIP PERFORMANCE OVER BROADBAND WIRELESS NETWORKS UNDER STATIC AND MOBILE ENVIRONMENTS (20)
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
How to Split Bills in the Odoo 17 POS ModuleCeline George
Bills have a main role in point of sale procedure. It will help to track sales, handling payments and giving receipts to customers. Bill splitting also has an important role in POS. For example, If some friends come together for dinner and if they want to divide the bill then it is possible by POS bill splitting. This slide will show how to split bills in odoo 17 POS.
We all have good and bad thoughts from time to time and situation to situation. We are bombarded daily with spiraling thoughts(both negative and positive) creating all-consuming feel , making us difficult to manage with associated suffering. Good thoughts are like our Mob Signal (Positive thought) amidst noise(negative thought) in the atmosphere. Negative thoughts like noise outweigh positive thoughts. These thoughts often create unwanted confusion, trouble, stress and frustration in our mind as well as chaos in our physical world. Negative thoughts are also known as “distorted thinking”.
Students, digital devices and success - Andreas Schleicher - 27 May 2024..pptxEduSkills OECD
Andreas Schleicher presents at the OECD webinar ‘Digital devices in schools: detrimental distraction or secret to success?’ on 27 May 2024. The presentation was based on findings from PISA 2022 results and the webinar helped launch the PISA in Focus ‘Managing screen time: How to protect and equip students against distraction’ https://www.oecd-ilibrary.org/education/managing-screen-time_7c225af4-en and the OECD Education Policy Perspective ‘Students, digital devices and success’ can be found here - https://oe.cd/il/5yV
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
The French Revolution, which began in 1789, was a period of radical social and political upheaval in France. It marked the decline of absolute monarchies, the rise of secular and democratic republics, and the eventual rise of Napoleon Bonaparte. This revolutionary period is crucial in understanding the transition from feudalism to modernity in Europe.
For more information, visit-www.vavaclasses.com
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdfTechSoup
In this webinar you will learn how your organization can access TechSoup's wide variety of product discount and donation programs. From hardware to software, we'll give you a tour of the tools available to help your nonprofit with productivity, collaboration, financial management, donor tracking, security, and more.
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
Read| The latest issue of The Challenger is here! We are thrilled to announce that our school paper has qualified for the NATIONAL SCHOOLS PRESS CONFERENCE (NSPC) 2024. Thank you for your unwavering support and trust. Dive into the stories that made us stand out!
VOIP PERFORMANCE OVER BROADBAND WIRELESS NETWORKS UNDER STATIC AND MOBILE ENVIRONMENTS
1. International Journal of Wireless & Mobile Networks (IJWMN) Vol.2, No.4, November 2010
DOI: 10.5121/ijwmn.2010.2407 82
VOIP PERFORMANCE OVER BROADBAND
WIRELESS NETWORKS UNDER STATIC AND
MOBILE ENVIRONMENTS
Anindita Kundu1
, Iti Saha Misra2
, Salil K. Sanyal3
, Suman Bhunia4
,
Department of Electronics and Telecommunication Engineering, Jadavpur University,
Kolkata-700032, India
1kundu.anindita@gmail.com,2iti@etce.jdvu.ac.in,
3s_sanyal@ieee.org, 4sumanbhunia@gmail.com
ABSTRACT
Voice over IP is expected to be very promising application in the next generation communication
networks. The objective of this paper is to analyse the VoIP performance among the most competing next
generation wireless networks like WiMAX, WLAN and its integrated frameworks etc. WiMAX having
higher bandwidth provides higher capacity but with degraded quality of service while WLAN provides
low capacity and coverage. Hence, an integrated network using WiMAX backbone and WLAN hotspots
has been developed and VoIP application has been setup. As OPNET 14.5.A provides a real life
simulation environment, we have opted OPNET as the simulation platform for all performance studies in
this work. Quality of the service is critically analysed with parameters like jitter, MOS and delay for
various voice codecs in the aforesaid networks for both fixed and mobile scenario. Finally, it is observed
and concluded that the WiMAX-WLAN integrated network provides improved and optimal performance
over WLAN and WiMAX network with respect to network capacity and quality of service. Exhaustive
simulation results have been provided.
KEYWORDS
WiMAX-WLAN Integrated network, backbone, hotspot, VoIP Codecs, Silence Suppression
1. INTRODUCTION
Wireless networking can now be considered as the backbone of the modern telecommunication
system. The fast demand for high speed data transfer without appreciable loss has led to the
evolution of technologies like WiMAX and WLAN. Although the above technologies have
reached an enhanced level to meet the customer demand, still there is ample scope to increase
the data rate and quality of service (QoS) beyond the present level.
WLANs [1] are mostly designed for private wired LANs and have been enormously successful
for data traffic but not for voice traffic as it is highly sensitive to delay and loss [2]. Voice over
WLAN has become popular, but maintenance of the speech quality is still one of many technical
challenges of the VoIP system. VoIP is spreading rapidly and huge requirement of supporting
multiple concurrent VoIP communications is coming up, but WLAN can support only a handful
number of users [3] [4].
The IEEE 802.11 Standard supporting WLAN architecture specifies two different mechanisms,
namely the contention-based Distributed Coordination Function (DCF) [5] and the polling-
based Point Coordination Function (PCF) [1] under MAC sub layer of the data link layer. DCF
uses a carrier sense multiple access with collision avoidance (CSMA/CA) scheme for medium
access and the optional four way handshaking request-to-send/clear-to-send [1] (RTS/CTS)
2. International Journal of Wireless & Mobile Networks (IJWMN) Vol.2, No.4, November 2010
83
mechanisms to eliminate hidden and exposed terminal problem. Best effort service can only
provide satisfactory results based on traffic types in case of unavailability of differentiation and
prioritization. However, for real time traffic such as VoIP the scheme does not support better
QoS. These features make the DCF scheme a less feasible option to support QoS for VoIP
traffic. On the other hand, the PCF mode enables the polled stations to transmit data without
contending for the channel. Studies on VoIP over WLAN in PCF mode [6] show that the polling
overhead is high with increased number of stations in a basic service set (BSS). This results in
excessive delay and poor performance of VoIP under heavy load conditions in PCF mode. Thus,
both DCF and PCF modes have limited support for real-time applications. Supporting VoIP
over WLAN using DCF mode poses significant challenges, because the performance
characteristics of their physical and MAC layers are much worse than their wired counterparts.
Thus, there is sufficient reason to make a performance study for VoIP over WLAN.
WiMAX (Worldwide Interoperability for Microwave Access) [7][8] on the other hand is
designed to deliver a metro area last mile Broadband Wireless Access (BWA) service. So, while
wireless LAN supports transmission range of up to few hundred meters, WiMAX system ranges
up to 30 miles [7]. Unlike a typical IEEE 802.11 WLAN with 11Mbps bandwidth which
supports very limited VoIP connections [4], an IEEE 802.16 WiMAX with 70Mbps bandwidth
[9] has the capacity to support comparatively large number of VoIP users. These features led to
the study and comparison of the VoIP QoS in IEEE 802.11b WLAN and IEEE 802.16 WiMAX
networks.
IEEE 802.16 support 5 types of service classes, namely UGS (Unsolicited Grant Service), rtPS
(real time Polling Service), nrtPS (non-real time Polling Service), BE (Best Effort Service),
ertPS (extended rtPS service) [10]. UGS supports fixed-size data packets at a constant bit rate
(CBR). It supports real time applications like VoIP or streaming applications but wastes
bandwidth during the off periods. rtPS supports variable bit rate(VBR) real-time service such as
VoIP. Delay-tolerant data streams such as an FTP is designed to be supported by the nrtPS. This
requires variable-size data grants at a minimum guaranteed rate. The nrtPS is similar to the rtPS
but allows contention based polling. Data streams, such as Web browsing, that do not require a
minimum service-level guarantee is supported by BE service. BE connections are never polled
and receive resources through contention. ertPS was introduced to support VBR real-time
services such as VoIP and video streaming. It has an advantage over UGS and rtPS for VoIP
applications as it carries lower overhead than UGS and rtPS [11] and hence is modeled in our
system.
Since, WiMAX is expected to create the opportunity to successfully penetrate the commercial
barrier by providing higher bandwidth, establishing wireless commons becomes an important
factor. The audible spectrum being fixed and a large part of the audible bandwidth already been
allocated to some organisations, the requirement of bandwidth for other organisations is still
increasing [12]. This has resulted in the bandwidth crunch. Also, with the fourth generation
mobile networks taken into consideration, network integration is another major technical and
social challenge regarding the future of the community-based Wi-Fi networks [13]. According
to [13], the foundation of the WiMAX PTP commons is the process of hot-spot interconnection
and integration. Instead of global Internet connectivity, many current applications and
businesses are expected to be better utilized with decreased bandwidth consumption by the use
of localized Wi-Fi constellation. With a step towards the next generation, an integrated network
as shown in Figure 1, comprising of both the WiMAX and WLAN network and using nodes
with dual stack is expected to provide a better performance with respect to the QoS and
bandwidth utilisation than a single WiMAX or WLAN network.
VoIP has been widely accepted for its cost effectiveness and easy implementation. A VoIP
system consists of three indispensable components, namely 1) codec, 2) packetizer, and 3)
playout buffer. Analog voice signals are compressed, and encoded into digital voice streams by
3. International Journal of Wireless & Mobile Networks (IJWMN) Vol.2, No.4, November 2010
84
the codecs. The output digital voice streams are then packed into constant-bit-rate (CBR) voice
packets by the packetizer. Voice signal when transmitted over an IP network, is first divided
into small fixed or variable size pieces, called payloads. One or more of these pieces are then
packed together for transmission. These packs are further encapsulated using one or more
appropriate sets of headers to generate IP packets for transmission. The packet header contains
all information pertaining to the destination, routing, control, and management of the IP packets
[14].Thus, preset circuits for transmission of information are not required. However, additional
bandwidth, processing, and memory space is needed for the packet header processing, and
packet buffering. This is an essential factor to be considered for real time applications like
VoIP. The smaller the number of voice or speech frames packed into a packet, the greater the
protocol/encapsulation overhead and processing delay. The larger the number of voice or speech
frames packed into one packet, the greater the packet processing or storing and transmission
delay [14]. The playout buffer is used at the receiver end to smooth the speech by removing the
delay jitter. Additional network delay not only causes the receiver’s playout buffer to wait
longer before reconstructing voice signal, it can also affect the liveliness of a speech signal
during a telephone conversation. ITU-T’s G.114 [15] states that the one-way ETE delay must be
less than 150 msec, and the packet loss must remain low (e.g., less than 5%) in order to
maintain the toll quality of the voice signal [16]. A one way conversation is very sensitive to
packet delay jitter but can tolerate certain (about 5%) of packet loss [15]. Loss of large number
of contiguous packets may give the impression of connection dropout to the communicating
parties.
Figure 1. WLAN integration using WiMAX [13]
Figure 2. A high-level packet voice transmission model [14]
The schematic diagram of a simple high-level packet voice transmission model is shown in
Figure 2. At the outgoing side, the analog voice signal is first digitized and packetised (voice
frame) using the techniques presented before. One or more voice frames are then packed into
one data packet for transmission. This involves mostly UDP encapsulation of RTP packets. The
UDP packets are then transmitted over a packet-switched (IP) network. This network adds (a)
switching, routing, and queuing delay, (b) delay jitter, and (c) probably packet loss. At the
incoming side, in addition to decoding, deframing, and depacking, a number of data/packet
processing mechanisms need to be incorporated to mitigate the effects of network impairments
such as delay, loss, delay jitter, etc. The objective is to maintain the real-timeliness, liveliness,
or interactive behavior of the voice streams.
4. International Journal of Wireless & Mobile Networks (IJWMN) Vol.2, No.4, November 2010
85
Quality of VoIP transmission under noisy environment is usually measured in terms of jitter
[17], MOS [18] and packet end-to-end delay [19]. Perceived voice with zero jitter, high MOS
and low packet end-to-end delay is considered to be the best. With the two competing wireless
networks namely WLAN and WiMAX, this paper analyses the perceived voice quality as
measured using OPNET 14.5.A and 15.0.A simulation environment.
2. VOICE OVER IP
Voice is analog and is converted into the digital format before transmitting over Internet. This
process is called encoding and the reverse is called decoding. Both the tasks are performed by
voice codecs [20]. With bandwidth utilization becoming a great concern, voice compression
techniques are used in practice [20] to reduce the bandwidth consumption. Voice compression
by a codec adds an additional overhead of algorithmic delay. Thus, a codec is expected to
provide good quality of VoIP even after compression, with minimum delay.
Table 1 shows the bandwidth requirements of some common codecs. G.711 is the international
standard for encoding telephone audio. It has a fixed bit rate of 64kbps. G.729 and G.723.1 are
low bit rate codecs at the expense of high codec complexity. G.729 is an industry standard with
high bandwidth utilization for toll-quality voice calls [21]. G.723.1 is one of the most efficient
codecs with the highest compression ratio and is usually used in video conferencing
applications. G.726 uses ADPCM speech codec standard, and transmits at rates of 16, 24, 32,
and 40 kbps. G.728 officially codes speech at 16kbps using low-delay code excited linear
prediction [22]. For example, during a call using G.711 as codec, the amount of data transfer for
both uplink and downlink will be 87.2 x 2 = 174.4kbps = 0.1703 Mbps = 10.21 Mb per minute.
So, G.711 uses 10.21 Mb/min per VoIP call where as G.729 uses 0.5Mb/min per voice call in
the same way.
Table 1. Bandwidth Requirement of Some Common Codecs [20] [23]
Codecs Algorithm Bandwidth
(kbps)
Ethernet
Bandwidth
Usage
(kbps)
G 711 PCM(Pulse Code Modulation) 64 87.2
G 729 CS-ACELP (Conjugate Structure Algebraic-Code
Excited Linear Prediction)
8 31.2
G 723.1 Multi Rate Coder 6.3 21.9
G 723.1 Multi Rate Coder 5.3 20.8
G 726 ADPCM(Adaptive Differential Pulse Code Modulation) 32 55.2
G 726 ADPCM(Adaptive Differential Pulse Code Modulation) 24 47.2
G 728 LD-CELP (Low-Delay Code Excited Linear Prediction) 16 31.5
Moreover, recently voice codecs are so developed to detect additional parameters talk-spurt [24]
and silence lengths [24] within a conversation. During a voice communication the time duration
during which the user speaks is called a talk-spurt and the time duration during which the user is
silent is called the Silence length or gap. Silence within a communication period leads to the
packetization of the background noise and sending it over the network. This causes bandwidth
wastage. Usually, during a conversation we talk 35% of the time and remain quiet rest of the
5. International Journal of Wireless & Mobile Networks (IJWMN) Vol.2, No.4, November 2010
86
time [24]. Silence suppression is done by the voice activity detection (VAD) algorithm. With
silence suppression during the silence period, the codec does not send any voice data. Instead of
voice data the VAD algorithm generates comfort noise which has packet size much less than the
voice traffic [14]. This is shown in figure 3a. This decreases channel utilisation and thereby
saves bandwidth. Figure 3b shows the scenario when silence is not suppressed and the
background noise are packetised along with the voice signal.
(a) (b)
Figure 3. Packet Creation based on voice activity. (a) Silence is suppressed and Comfort Noise
Generated (b) Silence is not suppressed.
Communication over wireless medium is noise sensitive. Noise causes the signal to reach the
destination with a lead or lag in time. This deviation is called jitter. Lead causes negative jitter
and lag causes positive jitter and both degrade the voice quality. The time taken by voice to be
transmitted from the mouth of the sender to the ear of the receiver is called packet end-to-end
delay. The packet end-to-end delay should be within 150ms for one way voice communication
[14]. Perceived voice quality is typically estimated by the subjective MOS, an arithmetic
average of opinion score. MOS of a particular codec is the average mark given by a panel of
auditors listening to several recorded samples. It ranges from 1(unacceptable) to 5 (excellent). It
depends on delay and packet dropped in the network. The E-model, an analytical model defined
in ITU-T recommendation[25] , provides a framework for an objective on-line quality
estimation based on network performance measurements like delay and loss and application
level factors like low bit rate codecs. The result of the E-model is the calculation of the R-factor
(best case 100 worst case 0) [25] is given by,
R = R0 – Is – Id – Ie + A. (1)
where the term R0 expresses the basic signal-to-noise ratio (received speech level relative to
circuit and acoustic noise), Is represents all impairments that occur more or less simultaneously
with the voice signal, such as: too loud speech level, non-optimum side tone, quantization noise,
etc., Id represents the impairment caused due to delay and echo effects, Ie is an "effective
equipment impairment factor", which represents impairments caused by low bit-rate codecs. It
also includes impairment due to packet-losses of random distribution. The advantage factor ‘A’
allows for an "advantage of access" for certain systems relative to conventional systems, trading
voice quality for convenience. While all other impairment factors are subtracted from the basic
signal-to-noise ratio R0, ‘A’ is added and thus compensates other impairments to a certain
amount. It can be used to take into account the fact that the user will tolerate some decrease in
transmission quality in exchange for the "advantage of access". Examples of such advantages
are cordless and mobile systems or connections into hard-to-reach regions via multi satellite
hops. ‘A’ is 10 for mobile telephony but 0 for VoIP [6]. R0 is considered to be 94.77 and Is is
considered to be 1.43 in OPNET 14.5.A. The relation between MOS and R-factor:
MOS = 1 + 0.035R + 7.10 - 6R(R – 60) (100 – R) (2)
The purpose of this modeling is to compare the performance parameters for the voice codecs in
WiMAX 802.16, WLAN 802.11b and their integrated network and thereby to show that the
integration provides optimal network capacity and quality of service.
6. International Journal of Wireless & Mobile Networks (IJWMN) Vol.2, No.4, November 2010
87
3. SIMULATION ENVIRONMENT
3.1 Scenario 1: Fixed network
Figure 4a shows the fixed WiMAX network setup. The Wireless Deployment Wizard of
OPNET is used to deploy a 7 celled WiMAX network, with multiple subscriber stations under
the coverage of a base station.
(a) (b)
Figure 4. Model for (a) Fixed WiMAX (b) WiMAX-WLAN Integrated Network
The base station is connected to the core network by a server backbone via an IP backbone and
an ASN Gateway which controls the mobility of the mobile nodes. The server backbone is
further connected to the voice server, configured as the SIP server. The base station, IP
Backbone, Server Backbone, ASN Gateway and the Voice Server together represent the service
provider company network. The Base Station and subscriber station parameters are as shown in
Table 2. The number of subscribers in cell 2 and cell 3 are 10 and VoIP calls are configured
between them in mesh.
Table 2. WiMAX and WLAN Network Parameters
WiMAX
Parameters
Values WLAN
Parameters
Values
WiMAX Service
Class
ertPS Physical
Characteristics
Direct Sequence
(DSSS)
BS Transmission
Power
10W Data Rate 11Mbps
SS Transmission
Power
0.5W Transmission
Power
5mW
PHY profile Wireless OFDMA
20MHz
Buffer Size 2048000 bits
Similar to the WiMAX network, a WLAN 802.11b network is also deployed by the Wireless
Deployment Wizard of OPNET featuring a 7 celled WLAN network with multiple subscriber
stations. Unlike, the WiMAX network, the WLAN network has Access Points (APs) in place of
the base stations and the mobile nodes of WiMAX are replaced by mobile nodes of WLAN. The
APs are also connected to the core network. The APs are connected to the voice server
configured as the SIP server via an IP backbone and a server backbone. These nodes represent
the service provider company network in WLAN environment. Similar to the WiMAX network,
the VoIP calls are setup between the subscribers of cell 2 and cell 3 in mesh. The important
parameters of the access points and the subscriber stations are as shown in Table 2.
Like Figure 1, a WLAN integrated network using WiMAX is developed as shown in Figure 4b.
Two WiMAX Base Stations are connected to each other and a SIP server via routers. A special
7. International Journal of Wireless & Mobile Networks (IJWMN) Vol.2, No.4, November 2010
88
type of node called SS_WiMAX_WLAN_AP having dual stack of both WiMAX and WLAN as
shown in Figure 5, is configured as the subscriber station of WiMAX network and Access Point
for the WLAN network. This node is the bridge between the WLAN subscriber stations and the
WiMAX base station. There are 10 WLAN subscriber stations under each
SS_WiMAX_WLAN_AP. VoIP calls are setup between 10 users of two such
SS_WiMAX_WLAN_AP. The parameters of the WiMAX Base Station and the WLAN
subscriber stations are same as shown in Table 2.
Figure 5. Protocol Stack of SS_WiMAX_WLAN_AP
3.2 Scenario 2: Mobile Network
Figure 6a shows the simulation setup used for mobile WiMAX network. Here, Generic Routing
Encapsulation (GRE) tunnels are setup between the ASN gateway and the base stations to
control the mobility of the mobile nodes. The mobile nodes are configured to move at a rate of
50 km/hr, 100 km/hr and 150 km/hr. The number of subscribers in cell 2 is 10 and the same in
cell 3 and 7 are 5 each. Voice over IP calls are setup between them using SIP and are shown by
the blue lines in the Figure 6.
(a) (b)
Figure 6. Model for (a) Mobile WiMAX (b) Mobile WiMAX-WLAN Integrated Network
Similarly, a WLAN 802.11b network is also deployed and mobility is configured. Another
scenario having two WLAN hot spots and a large span of area between the hot spots covered by
WiMAX is setup. Such a scenario is shown in Figure 6b. The WiMAX part of the network is
deployed by the Wireless deployment wizard of OPNET and WLAN APs are obtained from the
object palette. 10 special nodes are configured to move from one AP to the other i.e. from one
hot spot to another hot spot while communicating with 5 nodes of cell number 3 and 5 nodes of
cell number 7 of the WiMAX network. Results show that the mobile nodes are supported and
traffic is sent to them even when they are out of the coverage of the WLAN network and within
the jurisdiction of WiMAX network.
8. International Journal of Wireless & Mobile Networks (IJWMN) Vol.2, No.4, November 2010
89
4. SIMULATION RESULTS AND DISCUSSION
4.1 Scenario: Fixed Network
The variation of jitter with and without silence suppression is shown in Figure 7. From 7a, we
see that the average voice jitter is almost 0 for WiMAX implying very good quality of voice
while WLAN has a positive jitter varying from about 0.0007 to 0.001 seconds. The integrated
network shows jitter variation from about 0.0004 to 0.0006 seconds. For G.723.1, the average
jitter is almost 0 irrespective of the network indicating a very good performance. This is because
the bit rate of G.723.1 is 6.3 or 5.3 kbps which results in generation of small packets. However,
modem and fax signals cannot be carried by G.723.1 [24]. It can be used only for narrow band
communications.
(a) (b)
Figure. 7. Average jitter, (a) Without silence suppression (b) With silence suppression
With silence suppression, as shown in Figure 7b, the result is different. Like G.711, G.726 has
its roots in the PSTN network. It is primarily used for international trunks to save bandwidth.
Unlike G.711, G.726 uses 32 kbps to provide nearly the same quality of voice [26] because 32
kbps is the de facto standard. As shown in Figure 7b, the average voice jitter is almost 0 for all
codecs in both WLAN and WLAN-WiMAX integrated network where as the WiMAX network
shows a slight deviation for the voice codec G.726. The deviation for G.726 with 32kbps is the
highest and is about 0.03 sec which is within the allowable limit. G.726 also supports data rates
of 16kbps, 24kbps, and 40kbps. The 24kbps and 16 kbps channels are used for voice
communication in Digital Circuit Multiplication Equipment (DCME) and the 40 kbps is used
for data modem signals (especially modems doing 4800 kbps or higher) in DCME.
(a) (b)
Figure. 8. Average Packet End-to-end Delay (a) Without silence suppression (b) With silence
suppression
Figure 8 shows the packet end-to-end delay variation of the delay sensitive VoIP application for
the three networks. As shown in Figure 8a, the packet end-to-end delay for voice without
silence suppression is less than 0.5 seconds for WiMAX network. On the other hand, the high
bit rate codecs of WLAN network has very high packet end-to-end delay. This is because the
silence period is also packetized which results in an increase in the demand for bandwidth
requirement and causes congestion in the WLAN network. Since, the integrated network has a
9. International Journal of Wireless & Mobile Networks (IJWMN) Vol.2, No.4, November 2010
90
higher capacity; it shows reduced delay than the WLAN network as increased capacity results in
lower congestion.
As shown in Figure 8b, the packet end-to-end delay for VoIP with silence suppression for
WiMAX network is more than WLAN network while for the integrated network it is almost the
same as that in the WiMAX network. With silence suppression, the number of packets to be
sent decreases and thereby releases the congestion in the WLAN network. The distance to be
traversed by the packet in the WiMAX network is much higher than that to be covered in the
WLAN network. Even for the integrated network, the distance traversed by the packet is almost
as large as that of WiMAX network. For WLAN, the packet end-to-end delay is about 0.06
seconds except for G.723.1 where as for WiMAX and WLAN-WiMAX integrated network, the
delay varies from 0.08 seconds (for G.729 and G.711) to 0.13 seconds (for G.723.1).
Figure 9 shows the average MOS obtained by the three networks. As mentioned before, MOS
depends on the packet end-to-end delay and packets loss. As the Figure 9a shows, MOS value
obtained for WiMAX it is above 3, for WLAN it is almost 1. For the integrated network the
MOS value is about 1.5 except for G.723.1 for which it is 2.5. G.723.1 being a low bit rate
codec creates numerous packets which results in increased delay due to packet reassembly. As
a result the MOS value is low in case of WiMAX network. On the other hand, G.723.1 has low
bandwidth requirement and hence less packets are dropped compared to the other codecs in
WLAN network. Hence it has higher MOS compared to the other codecs.
(a) (b)
Figure. 9. Average voice MOS (a) Without silence suppression (b) With silence suppression
The result with silence suppression is totally different as is shown in Figure 9b. Here, WLAN
network performs the best among the three networks with a MOS value above 3.5 except for
G.711 and G.723.1. The MOS value for G.711 is about 3 and for G.723.1 is about 2.5. With the
silence suppression, the number of packets in the network decreases which releases the
congestion in the WLAN network. This reduces the number of packets dropped and hence
increases the MOS value. The codec G.723.1 is a low bit rate codec having bit rate of 5.3 kbps
and 6.3kbps. The packet end-to-end delay is larger for G.723.1 compared to the other codecs
and this result in lower MOS values.
4.2 Scenario 2: Mobile Network
Figure 10 shows the variation of jitter for all the three networks in the mobile scenario. The
mobile nodes are configured to move at a speed of 50 km/hr, 100km/hr and 150 km/hr. As
shown in the figure, the average jitter for WLAN network is very high compared to the WiMAX
network. The WLAN-WiMAX integrated network shows variation of jitter almost like that of
WiMAX. The jitter is very low compared to WLAN implying very good performance. The
average performance of the networks with respect to the variations of speed of the mobile nodes
is almost the same. Between the integrated network and the WiMAX network, the WiMAX
network performs slightly better as no vertical handover is involved. Average Jitter with silence
suppression could not be analyzed due to the limitations of OPNET.
10. International Journal of Wireless & Mobile Networks (IJWMN) Vol.2, No.4, November 2010
91
Average Jitter
0
0.05
0.1
0.15
0.2
0.25
0.3
0.35
50km/hr
100km/hr
150km/hr
50km/hr
100km/hr
150km/hr
50km/hr
100km/hr
150km/hr
WiMAX WLAN Intergrated
Network
Sec
G711 G723.1 G726 G728 G729
Figure. 10. Average Jitter in mobile network
As shown in Figure 11a, the average packet end-to-end delay for the WiMAX network and
WLAN-WiMAX integrated network is negligible compared to the WLAN network. The delay
shown by the WLAN is in the order of minutes which render the network practically unusable.
Figure 11b shows the variation of delay between the WiMAX network and the integrated
network which is almost zero with respect to WLAN. Between the two networks, WLAN is
once again found to perform the best and the integrated network performance is slightly
degraded. It is also observed that the delay increases with the speed and G. 711 has highest
delay among other codecs for integrated network. This is because G. 711 is the highest bit rate
codec and has a data rate of 64kbps. As the mobile nodes move, they get handed over both
horizontally and vertically. With high data rate, more packets eventually get dropped during the
handover. Any packet dropped by the lower layer is perceived as delay by the upper layers.
Hence, the delay associated with G .711 as exhibited in Figure 11b.
Close observation of the results reveals that WiMAX network performs better on the basis of
jitter, MOS and packet end-to-end delay than conventional WLAN 802.11b in case of voice
applications when no silence suppression is considered, i.e. with no bar on the bandwidth usage.
However, when more users are to be accommodated, bandwidth becomes a constraint for which
silence suppression has to be used. Now, with silence suppression, WLAN is observed to
provide a better voice quality than WiMAX with the limitation of not supporting vehicular
mobility. WiMAX network though provides high capacity with degradation of the voice quality
as reflected from the MOS value, has to be used to support vehicular mobility. On the other
hand WLAN has less capacity but provides a better voice quality in static scenario. The
integrated network in the static scenario performs better than WiMAX and almost like WLAN
i.e. holds the second best position and in the mobile scenario; the integrated network performs
almost like WiMAX which is much better than WLAN. This is exhibited in Table 3. The mobile
scenario with silence suppression could not be simulated due to the limitations of OPNET.
However, the literature states that the capacity of mobile WiMAX network is doubled when
silence suppression is used [27]. Hence, the integrated deployment of WiMAX and WLAN is
expected to be competent enough to provide optimal voice quality with optimal network
capacity in both static and mobile scenario.
11. International Journal of Wireless & Mobile Networks (IJWMN) Vol.2, No.4, November 2010
92
Packet End-to-End Delay
0
20
40
60
80
100
120
140
160
180
50km/hr
100km/hr
150km/hr
50km/hr
100km/hr
150km/hr
50km/hr
100km/hr
150km/hr
WiMAX WLAN Integrated
Network
Sec
G711 G723.1 G726 G728 G729
Packet End-to-End Delay
0
0.05
0.1
0.15
0.2
0.25
0.3
50km/hr 100km/hr 150km/hr 50km/hr 100km/hr 150km/hr
WiMAX Integrated
Network
sec
G711 G723.1 G726 G728 G729
(a) (b)
Figure. 11. Average Packet End-to-End Delay
Table 3. Tabular representation of the network performance and capacity
Static Network Mobile Network
With silence
suppression
Without silence
suppression
Without silence
suppression
WLAN-WiMAX
Integrated Network
Moderate Moderate Moderate
WLAN Good Bad Bad
WiMAX Bad Good Good
5 CONCLUSION
In this paper extensive simulation based performance analysis has been done over a WiMAX
based BWA network, a WLAN (IEEE 802.11b), and also on a WLAN-WiMAX integrated
network for VoIP application. For this purpose OPNET 14.5.A and 15.0.A have been used as
the simulation platform. Multiple competing traffic sources using SIP signalling over the
networks are generated and the trace of traffic and measurements for different performance
parameters discussed in this paper are obtained for both fixed and mobile scenarios. Since, the
work is focussed on VoIP application, the performance evaluation is carried out through
different voice codecs as supported by OPNET and the measurement attribute is based on the
performance parameters such as jitter, MOS, end-to-end delay etc. suitable for judging the
quality of the network handling real time traffic. A comparative study for the three different
network models for the above measurement has also been made for both scenarios. The optimal
performance is exhibited by WiMAX-WLAN integrated network.
Acknowledgment: The authors deeply acknowledge the support from DST, Govt. of India for this work
in the form of FIST 2007 Project on “Broadband Wireless Communications” in the Department of ETCE,
Jadavpur University.
References
[1] B. P. Crow, I. Widjaja, J. G. Kim & P.T.Satkai, (1997) “IEEE 802.11 Wireless Local Area
Networks”, IEEE Communications, IEEE Communications Magazine, vol. 35, no. 9, pp. 116-
126.
[2] D. Malone, P. Clifford, D.J. Leith, (2006) “On Buffer Sizing for Voice in 802.11 WLANs”,
IEEE Communications Letters, 10(10), 700-703.
[3] http://voip.biz-news.com/news/tags/en_US/VoIP
12. International Journal of Wireless & Mobile Networks (IJWMN) Vol.2, No.4, November 2010
93
[4] A Trapeze Networks White Paper,( 2006) “Smart Mobile™: Next-Generation Wlan Architecture
For High Performance Networks”.
[5] Y.Li, C.Wang, K. Long & W. Zhao, “Modelling Channel Access Delay and Jitter of IEEE
802.11 DCF”, Proceedings of Wireless Personal Communications, Vol 47, No. 3, pp. 417-440.
[6] D.Y. Chen, S. Garg, M. Kappes, & K. S. Trivedi, (2002) “Supporting VBR VoIP traffic with
IEEE 802.11 WLAN in PCF mode”, Proceedings of OPNETWork 2002, Washington D. C.
[7] F.E.Retnasothie, M.K. Ozdemir , T.Y’ Cek , H. Celebi , J. Zhang, & R. Muththaiah,
(2006)“Wireless IPTV over WiMAX: Challenges and Applications”, Proceedings of IEEE
WAMICON, pp 1-5,
[8] A. Ghosh, D. R. Wolter, J. G. Andrews & R. Chen, (2005) “Broadband Wireless Access with
WiMax/802.16: Current Performance Benchmarks and Future Potential”, IEEE Communications
Magazine, Vol 43, No. 2, pp. 129-136.
[9] L. X. Cai, X. (Sherman) Shen, J. W. Mark, L. Cai & Y. Xiao, (2006) “Voice Capacity Analysis
of WLAN With Unbalanced Traffic”, IEEE Transations on Vehicular Technologies, Vol. 55,
No.3.
[10]N.Nagarajan' , Rajeev & B. Kaarthick, (2009)“Performnance analysis of Video Conferencing
and Multimedia application Services over WiMAX”, IEEE International Advance Computing
Conference (IACC 2009), Patiala, India.
[11]G. Chu, D.Wang & S. Mei, (2002) “A QoS Architecture for the MAC protocol of IEEE 802.16
BWA System,” IEEE 2002 ICC, Circuits and Systems, vol. 1, pp. 435 -439.
[12]K.B.Letalef & Wei Zhang, (2009) “Cooperative Communication for Cognitive Radio”,
Proceedings of IEEE, Vol 97, No. 5.
[13]B.Angelov & B.Rao, (2009) “The Progression of WiMAX Toward a Peer-to- Peer Paradigm
Shift”, Annual Review of Communications, Vol 59.
[14]B. Khasnabish, “Implementing Voice over IP”, Wiley-Inter Science, Lexington, Massachusetts,
USA.
[15]G.114 Recommendation, (1996) “One Way Transmission Time”, ITU-T, Geneva.
[16]IEEE, (1998) IEEE Network Magazine, IEEE Press/Publishers, New York, Vol. 12, No.1,
January/ February.
[17]J.Chin, A.Cantoni, (1998)“Phase Jitter ≡ Timing Jitter”, IEEE Communications Letters, Vol. 2,
No. 2.
[18]M.Molina-Garcia, J.I.Alonso, (2009) “Evolution of Mean Opinion Score due to Handover
Events in IEEE 802.11 WLAN Networks”, Proceedings of Radio and Wireless Symposium, San
Diego, CA, pp. 207-210.
[19]M.Baldi, Y.Ofek, (1998) “End to End Delay of videoconferencing over Packet Switched
Networks”, INFOCOM’98, Proceedings of Seventeenth Annual Joint Conference of IEEE
Computer and Communications Society, San Francisco, CA, USA, Vol. 3, pp. 1084-1092.
[20]http://whirlpool.net.au/wiki/?tag=VoIP_Codecs
[21]http://en.wikipedia.org/wiki/G.726
[22]Trad, F. Munir, H. Afifi, (2006) “Capacity Evaluation of VoIP in IEEE 802.11e WLAN
Environment”, IEEE CCNC 2006 Proceedings.
[23]http://wiki.snom.com/Bandwidth_requirements_and_QoS
[24]O.Hersent, J.Petit, D.Gurle, (2005) IP Telephony- Deploying Voice-Over-IP Protocols, John
Wiley & Sons, Ltd.
[25]“The E-Model, a Computational Model for use in Transmission Planning”, (2005) ITU-T Rec
G.107.
[26]http://www.voip-info.org/wiki/view/ITU+G.726S.
[27]Chakchai So-In, Raj Jain, Abdel-Karim Tamimi, (2010) “Capacity Evaluation of IEEE 802.16e
Mobile WiMAX”, Journal of Computer Systems Networks, Networks and Communications,
Volume 2010.