VJ Presentation 3 Oct 2022.pptx
•Download as PPTX, PDF•
0 likes•7 views
This document summarizes hazards identified for a chill water piping installation and welding project at Kobelco (M) Sdn. Bhd. It identifies the most critical safety hazard as working at height without fall protection and the most critical health hazard as inhalation of welding fumes. Recommendations are provided for both hazards, including use of fall protection like harnesses and administrative controls for training as well as personal protective equipment like respirators. A review program is outlined to ensure the effectiveness of the proposed control measures for safety and health. Benefits of implementing the recommendations include increased productivity, protecting company reputation, compliance with laws, and reduced costs.
Report
Share
Report
Share
Recommended
Resume1 (1)
This document provides the resume of J. Balaji, who has over 10 years of experience in safety and environment roles. He holds qualifications including a B.Sc in Physics, a Post Graduate Diploma in Health Safety and Environment, an M.Sc in Physics (pursuing), and NEBOSH and fire safety certifications. Balaji has worked in safety officer and engineer roles for companies in Kuwait, Qatar, Dubai, and India, with responsibilities including inspection, auditing, training, permitting and emergency response. He is a member of the American Society of Safety Engineers Kuwait Chapter and is proficient in Microsoft Office, computer hardware and networking.
Internship report (Ikram Ali)
1) The document outlines the internship report submitted by Ikram Ali Zardari to DESCON Engineering Services & Technology regarding their internship in the Health, Safety, and Environment department.
2) During the internship, Ikram was introduced to key HSE concepts like risk management techniques, HAZOP studies, loss prevention engineering, and fire water systems.
3) The internship provided both theoretical and practical experience in these areas through daily sessions, assignments, and group discussions with the HSE team. Ikram's report indicates the value gained from the training at DESCON.
RESUME
Mohammad Shehzad has over 9 years of experience as an HSE Supervisor in Saudi Arabia. He has a NEBOSH international General Certificate in Occupational Health and Safety and postgraduate qualifications. He has extensive training in areas such as first aid, permit systems, confined space entry, working at heights, and more. His experience includes roles with Sadara, Fluor Arabia Ltd., CPSC, Samsung, and others on projects such as laboratories, infrastructure, and oil and gas facilities where he implemented safety policies and procedures.
Update CV 01.08.15
Edmar Reso is a safety professional with over 15 years of experience in the construction industry. He has extensive training in occupational health and safety and holds certificates in NEBOSH, IOSH Managing Safely, and other safety programs. Reso is currently working as an HSE officer for a construction project in Qatar and is responsible for ensuring safety compliance and conducting inspections, investigations, and reporting. He aims to reduce hazards and eliminate accidents through clear communication of safety goals and objectives.
Nebosh Ghana_BATD173
This document provides information on a NEBOSH International Technical Certificate in Oil and Gas Operational Safety course taking place from March 21-26, 2016 in Accra, Ghana. The course leader, Patrick Casken, has over 25 years of experience in health and safety. The course covers principles of process safety management in oil and gas, focusing on hydrocarbon process safety to effectively manage risks. It is suitable for safety professionals in oil and gas onshore and offshore. The course objectives are to provide a safer workplace, assurance of safety standards, and return on investment through practical knowledge.
Summer training report
The document is a summer training report submitted by Indranil Banerjee, a 3rd year civil engineering student at Aliah University. It summarizes Indranil's 1 month summer training from June 1-30, 2017 at the Godrej Prakriti Phase-III housing project site run by Simplex Infrastructures Limited in Sodepur, Kolkata. The report covers various topics learned during the training, including safety practices, the role of the store department, plant and machinery used, and provides an overview of the housing project.
PRAVEENKUMAR SAFETY CV (7).doc - Copy
Praveenkumar Mahadev Mane is applying for a safety engineer position. He has over 10 years of experience as a safety officer and assistant safety officer on large infrastructure projects in the Middle East. Currently, he works as an HSE engineer on the $7.82 billion Riyadh Metro project in Saudi Arabia. Previously, he has held safety roles on tunneling and metro projects in Abu Dhabi and Dubai. Mane holds qualifications in nursing, occupational health and safety management, and emergency response.
Seminar 141120202109-conversion-gate02
This document summarizes a seminar on construction site safety and management. It discusses why safety is important, including reducing costs from accidents, legal obligations, and protecting a company's reputation. It then outlines the key aspects of a safety management plan, including identifying hazards, developing controls and training, conducting inspections, and analyzing any accidents. The document provides examples of physical, biological, chemical, and ergonomic hazards common in construction. It emphasizes the importance of planning, communication through tools like signage and training, and ongoing review and improvement of safety practices.
Recommended
Resume1 (1)
This document provides the resume of J. Balaji, who has over 10 years of experience in safety and environment roles. He holds qualifications including a B.Sc in Physics, a Post Graduate Diploma in Health Safety and Environment, an M.Sc in Physics (pursuing), and NEBOSH and fire safety certifications. Balaji has worked in safety officer and engineer roles for companies in Kuwait, Qatar, Dubai, and India, with responsibilities including inspection, auditing, training, permitting and emergency response. He is a member of the American Society of Safety Engineers Kuwait Chapter and is proficient in Microsoft Office, computer hardware and networking.
Internship report (Ikram Ali)
1) The document outlines the internship report submitted by Ikram Ali Zardari to DESCON Engineering Services & Technology regarding their internship in the Health, Safety, and Environment department.
2) During the internship, Ikram was introduced to key HSE concepts like risk management techniques, HAZOP studies, loss prevention engineering, and fire water systems.
3) The internship provided both theoretical and practical experience in these areas through daily sessions, assignments, and group discussions with the HSE team. Ikram's report indicates the value gained from the training at DESCON.
RESUME
Mohammad Shehzad has over 9 years of experience as an HSE Supervisor in Saudi Arabia. He has a NEBOSH international General Certificate in Occupational Health and Safety and postgraduate qualifications. He has extensive training in areas such as first aid, permit systems, confined space entry, working at heights, and more. His experience includes roles with Sadara, Fluor Arabia Ltd., CPSC, Samsung, and others on projects such as laboratories, infrastructure, and oil and gas facilities where he implemented safety policies and procedures.
Update CV 01.08.15
Edmar Reso is a safety professional with over 15 years of experience in the construction industry. He has extensive training in occupational health and safety and holds certificates in NEBOSH, IOSH Managing Safely, and other safety programs. Reso is currently working as an HSE officer for a construction project in Qatar and is responsible for ensuring safety compliance and conducting inspections, investigations, and reporting. He aims to reduce hazards and eliminate accidents through clear communication of safety goals and objectives.
Nebosh Ghana_BATD173
This document provides information on a NEBOSH International Technical Certificate in Oil and Gas Operational Safety course taking place from March 21-26, 2016 in Accra, Ghana. The course leader, Patrick Casken, has over 25 years of experience in health and safety. The course covers principles of process safety management in oil and gas, focusing on hydrocarbon process safety to effectively manage risks. It is suitable for safety professionals in oil and gas onshore and offshore. The course objectives are to provide a safer workplace, assurance of safety standards, and return on investment through practical knowledge.
Summer training report
The document is a summer training report submitted by Indranil Banerjee, a 3rd year civil engineering student at Aliah University. It summarizes Indranil's 1 month summer training from June 1-30, 2017 at the Godrej Prakriti Phase-III housing project site run by Simplex Infrastructures Limited in Sodepur, Kolkata. The report covers various topics learned during the training, including safety practices, the role of the store department, plant and machinery used, and provides an overview of the housing project.
PRAVEENKUMAR SAFETY CV (7).doc - Copy
Praveenkumar Mahadev Mane is applying for a safety engineer position. He has over 10 years of experience as a safety officer and assistant safety officer on large infrastructure projects in the Middle East. Currently, he works as an HSE engineer on the $7.82 billion Riyadh Metro project in Saudi Arabia. Previously, he has held safety roles on tunneling and metro projects in Abu Dhabi and Dubai. Mane holds qualifications in nursing, occupational health and safety management, and emergency response.
Seminar 141120202109-conversion-gate02
This document summarizes a seminar on construction site safety and management. It discusses why safety is important, including reducing costs from accidents, legal obligations, and protecting a company's reputation. It then outlines the key aspects of a safety management plan, including identifying hazards, developing controls and training, conducting inspections, and analyzing any accidents. The document provides examples of physical, biological, chemical, and ergonomic hazards common in construction. It emphasizes the importance of planning, communication through tools like signage and training, and ongoing review and improvement of safety practices.
Behaviour Based Safety Approach in Shipyard
This document summarizes a study on implementing a Behaviour Based Safety (BBS) approach in a shipyard in South India. The study involved observing 15 workers (10 grinding workers and 5 forklift operators) to identify critical unsafe behaviors. Checklists were developed and workers were observed and given daily feedback. Over 8 weeks, the percentage of observed safe behaviors increased while unsafe behaviors decreased for both groups. For grinding workers, the safety index improved from 43% to 88%, while for forklift operators it increased from 49% to 89%. The results suggest BBS is an effective method for improving safety performance in shipyards by modifying worker behaviors.
BATD164
This document provides information about a NEBOSH International Technical Certificate in Oil and Gas Operational Safety course being held from March 14-17, 2016 in Cape Town, South Africa. It introduces the course leader, Patrick Casken, who has over 25 years of experience in health and safety. The course covers principles of process safety management in the oil and gas industries and managing operational risks. It is suitable for safety professionals working in the oil and gas industry and focuses on hydrocarbon process safety and process safety management. The course uses a risk-based approach and covers topics like incident investigation, hazards, risk assessment, process safety, emergency response, and transport safety over its 5 days.
Alexis Catabona Gruspe_original
This document provides a summary of Alexis Catabona Gruspe's qualifications and experience. It includes her personal details, career objectives, qualifications such as NEBOSH and OSHA certifications, employment history as a Safety Officer for various oil and gas projects in Qatar and the UAE, responsibilities in those roles, training and seminars attended, commendations and awards received, and education background.
GHULAM MARCH 2015
The candidate is seeking a senior level position in industrial safety and has over 9 years of experience in the field. They have technical qualifications including NEBOSH and IOSH certifications. Responsibilities would include maintaining safety documents, conducting audits and inspections, advising on safety equipment purchases and maintenance, conducting safety training programs, and ensuring compliance with safety laws and standards. The candidate has worked as a Safety Officer for a construction company in Saudi Arabia on various industrial projects since 2005.
Nebosh SA_BATD164
This document provides information about a 3-day NEBOSH International Technical Certificate in Oil and Gas Operational Safety course taking place from March 14-16, 2016 in Johannesburg, South Africa. It introduces the course leader, Patrick Casken, who has over 25 years of experience in health and safety. The course covers principles of process safety management in the oil and gas industries and focuses on hydrocarbon process safety to effectively manage risks onshore and offshore. It is suitable for safety professionals working in the oil and gas industry and aims to provide knowledge to manage risks and achieve international health and safety standards. The course will be taught through a risk-based approach and cover topics like incident investigation, hazards, risk management, process safety,
Srinivasa Rao - HSE
Srinivasa Rao has over 20 years of experience in HSE roles in oil, gas and manufacturing projects. He has a diploma in Fire and Safety Engineering and is NEBOSH, OSHAS and IOSH certified. He has worked on projects in the UAE, Malaysia, Saudi Arabia and India, ensuring safety compliance and training workers. His responsibilities include conducting inspections, investigating incidents, developing safety programs, and advising on fire protection.
EDEAGHE ONOSABUNA GABRIEL CV (1)
Gabriel Edeaghe Onosabuna is a safety officer seeking a career opportunity. He has over 15 years of experience in health, safety, and environment roles for oil and gas companies. He has a higher national diploma in petroleum engineering and various safety certifications. Gabriel seeks to utilize his skills to promote organizational growth while achieving career excellence.
Job Safety Analyses For Energization of Substation..doc
This document outlines safety practices for energizing a substation. It lists 6 key steps of the job: 1) obtaining a work permit, 2) work preparation and planning, 3) arranging and inspecting tools/equipment, 4) conducting a daily toolbox talk, 5) using hand tools, and 6) switching the main control switch. For each step, potential hazards are identified and controls are recommended to minimize risks. Proper personal protective equipment, lockout/tagout procedures, communications, and only allowing certified personnel to perform high-risk tasks are among the numerous controls described to enhance safety when energizing the substation.
Safety plan
This document outlines the safety policy and procedures for a road upgrading project in Nepal. It includes the project organizational chart, roles and responsibilities of staff, identified hazards, and mitigation measures. The objectives are to establish health and safety committees, ensure compliance with legislation, provide training, and actively manage risks. Hazards addressed include physical, chemical, mechanical, physiological, psychosocial, and biological risks. Procedures outlined are for access control, ground support, fire prevention, ventilation, illumination, air monitoring, emergencies, and record keeping. Personal protective equipment and reviews of the policy are also discussed.
construction site safety and management
This seminar presentation discusses construction site safety and management. It covers identifying hazards, developing a safety plan, implementing safety procedures, checking compliance, and learning from accidents. The presentation outlines common hazards at construction sites, appropriate personal protective equipment, and a PDCA approach to safety management involving planning, responsibilities/communication, checking, and acting on lessons learned. Accident analysis is discussed as a way to investigate root causes and implement corrective actions to prevent future incidents.
Industrial safety unit v ppt
The document discusses various topics related to industrial safety, including explosions, disaster management, catastrophe control, hazard control, safety education and training, factories act, safety regulations, and product safety. It defines different types of explosions like chemical explosions, physical explosions, and vapor cloud explosions. It outlines the roles and responsibilities of organizations and individuals in disaster management and discusses approaches to hazard control in industries.
Hse nitish
This document provides an overview of safety and environmental management practices in the upstream oil and gas industry. It discusses the health, safety, and environmental policy of ONGC, terms used in the industry, causes of accidents, major activities (drilling, production, exploration), and safety practices for each. It also covers risk assessment and analysis, technologies to enhance fire and life safety, and concludes by emphasizing the importance of addressing potential health risks early in project planning processes.
HSE Engineer
HSE professional with twelve years plus experience in the construction/manufacturing industry – buildings, infrastructure, pre-cast concrete and fabrication of heavy steel structures/equipment in oil/gas sector with basic qualifications in Electrical engineering and additional qualifications in health safety and environment. Highly pro-active and articulate in communication and possessing excellent leadership, management and persuasive skills to bring about changes in the work culture particularly on health, safety and environmental issues.
Safety equipments
This document discusses various safety considerations and protocols for construction sites. It covers why safety is important, different types of safety risks like electrical, chemical and fire safety. It outlines personal protective equipment that should be worn like hard hats, gloves, safety glasses. It provides safety rules for construction sites regarding speed limits, unauthorized access. It discusses hazards and how to control them through measures like clean worksites, ladder safety, lifting precautions, training programs and having an emergency response system. Personal protective equipment and clothing of different classes are also outlined.
MUSADDIQ UPDATED CV
This resume is for Musaddiq Shah, who is applying for the position of Safety Officer/Supervisor. He has over 3 years of experience in health, safety, and environment roles. He holds several safety certifications and speaks multiple languages. His responsibilities have included inspecting worksites for hazards, ensuring scaffold and lifting equipment safety, conducting safety training programs, and maintaining safety compliance and statistics.
ANAND HSE- CV
The letter is a cover letter from Anand Kumar C S applying for the position of HSE Advisor. He has 8 years of experience in manufacturing and marine industries. He currently works as an HSE Engineer at Jurong Shipyard Pte Ltd in Singapore. He has strong experience in project safety management, risk assessment, hazard identification, and safety systems. He holds certifications in NEBOSH, fire safety, and hazard identification. He believes he can significantly contribute to maintaining high safety standards based on his experience.
saqib cv 1 (1)(1)
This document contains the resume of Muhammad Saqib for the role of a Health, Safety & Environment professional. It outlines his objective of conducting safety evaluations and surveys to ensure compliance with regulations. It describes his job duties such as circulating safety materials, inspecting workplaces, maintaining safety records and ensuring staff training on fire safety and first aid. It also provides details of his 4.7 years of international and domestic work experience in safety roles, along with his education qualifications and computer skills.
Safety health and environment
This document outlines the safety, health, environment and security plan for PT. Karinda Daya Perkasa. It discusses establishing a SHE management system to ensure work is performed safely and healthily. The contractor will base their site SHE program on 5 pillars: identifying risks, cultivating a safety culture, supervision, following safe work procedures, and inspections/audits. The plan also discusses organizing a safety committee, coordination internally and externally, and implementing programs like basic SHE rules, training, permitting, fire prevention and emergency response.
CV NADAKKAL (2)
This document is a curriculum vitae for Roopesh Nadakkal, who has over 7 years of experience as a Health, Safety, and Environment (HSE) Officer working in oil, gas, and infrastructure construction projects in the United Arab Emirates, Saudi Arabia, and India. He holds several professional health and safety qualifications and has worked on projects such as airport construction in Abu Dhabi and refinery expansion projects in Saudi Arabia. His responsibilities have included implementing health and safety policies, conducting risk assessments, investigating incidents, and ensuring compliance with regulations.
More Related Content
Similar to VJ Presentation 3 Oct 2022.pptx
Behaviour Based Safety Approach in Shipyard
This document summarizes a study on implementing a Behaviour Based Safety (BBS) approach in a shipyard in South India. The study involved observing 15 workers (10 grinding workers and 5 forklift operators) to identify critical unsafe behaviors. Checklists were developed and workers were observed and given daily feedback. Over 8 weeks, the percentage of observed safe behaviors increased while unsafe behaviors decreased for both groups. For grinding workers, the safety index improved from 43% to 88%, while for forklift operators it increased from 49% to 89%. The results suggest BBS is an effective method for improving safety performance in shipyards by modifying worker behaviors.
BATD164
This document provides information about a NEBOSH International Technical Certificate in Oil and Gas Operational Safety course being held from March 14-17, 2016 in Cape Town, South Africa. It introduces the course leader, Patrick Casken, who has over 25 years of experience in health and safety. The course covers principles of process safety management in the oil and gas industries and managing operational risks. It is suitable for safety professionals working in the oil and gas industry and focuses on hydrocarbon process safety and process safety management. The course uses a risk-based approach and covers topics like incident investigation, hazards, risk assessment, process safety, emergency response, and transport safety over its 5 days.
Alexis Catabona Gruspe_original
This document provides a summary of Alexis Catabona Gruspe's qualifications and experience. It includes her personal details, career objectives, qualifications such as NEBOSH and OSHA certifications, employment history as a Safety Officer for various oil and gas projects in Qatar and the UAE, responsibilities in those roles, training and seminars attended, commendations and awards received, and education background.
GHULAM MARCH 2015
The candidate is seeking a senior level position in industrial safety and has over 9 years of experience in the field. They have technical qualifications including NEBOSH and IOSH certifications. Responsibilities would include maintaining safety documents, conducting audits and inspections, advising on safety equipment purchases and maintenance, conducting safety training programs, and ensuring compliance with safety laws and standards. The candidate has worked as a Safety Officer for a construction company in Saudi Arabia on various industrial projects since 2005.
Nebosh SA_BATD164
This document provides information about a 3-day NEBOSH International Technical Certificate in Oil and Gas Operational Safety course taking place from March 14-16, 2016 in Johannesburg, South Africa. It introduces the course leader, Patrick Casken, who has over 25 years of experience in health and safety. The course covers principles of process safety management in the oil and gas industries and focuses on hydrocarbon process safety to effectively manage risks onshore and offshore. It is suitable for safety professionals working in the oil and gas industry and aims to provide knowledge to manage risks and achieve international health and safety standards. The course will be taught through a risk-based approach and cover topics like incident investigation, hazards, risk management, process safety,
Srinivasa Rao - HSE
Srinivasa Rao has over 20 years of experience in HSE roles in oil, gas and manufacturing projects. He has a diploma in Fire and Safety Engineering and is NEBOSH, OSHAS and IOSH certified. He has worked on projects in the UAE, Malaysia, Saudi Arabia and India, ensuring safety compliance and training workers. His responsibilities include conducting inspections, investigating incidents, developing safety programs, and advising on fire protection.
EDEAGHE ONOSABUNA GABRIEL CV (1)
Gabriel Edeaghe Onosabuna is a safety officer seeking a career opportunity. He has over 15 years of experience in health, safety, and environment roles for oil and gas companies. He has a higher national diploma in petroleum engineering and various safety certifications. Gabriel seeks to utilize his skills to promote organizational growth while achieving career excellence.
Job Safety Analyses For Energization of Substation..doc
This document outlines safety practices for energizing a substation. It lists 6 key steps of the job: 1) obtaining a work permit, 2) work preparation and planning, 3) arranging and inspecting tools/equipment, 4) conducting a daily toolbox talk, 5) using hand tools, and 6) switching the main control switch. For each step, potential hazards are identified and controls are recommended to minimize risks. Proper personal protective equipment, lockout/tagout procedures, communications, and only allowing certified personnel to perform high-risk tasks are among the numerous controls described to enhance safety when energizing the substation.
Safety plan
This document outlines the safety policy and procedures for a road upgrading project in Nepal. It includes the project organizational chart, roles and responsibilities of staff, identified hazards, and mitigation measures. The objectives are to establish health and safety committees, ensure compliance with legislation, provide training, and actively manage risks. Hazards addressed include physical, chemical, mechanical, physiological, psychosocial, and biological risks. Procedures outlined are for access control, ground support, fire prevention, ventilation, illumination, air monitoring, emergencies, and record keeping. Personal protective equipment and reviews of the policy are also discussed.
construction site safety and management
This seminar presentation discusses construction site safety and management. It covers identifying hazards, developing a safety plan, implementing safety procedures, checking compliance, and learning from accidents. The presentation outlines common hazards at construction sites, appropriate personal protective equipment, and a PDCA approach to safety management involving planning, responsibilities/communication, checking, and acting on lessons learned. Accident analysis is discussed as a way to investigate root causes and implement corrective actions to prevent future incidents.
Industrial safety unit v ppt
The document discusses various topics related to industrial safety, including explosions, disaster management, catastrophe control, hazard control, safety education and training, factories act, safety regulations, and product safety. It defines different types of explosions like chemical explosions, physical explosions, and vapor cloud explosions. It outlines the roles and responsibilities of organizations and individuals in disaster management and discusses approaches to hazard control in industries.
Hse nitish
This document provides an overview of safety and environmental management practices in the upstream oil and gas industry. It discusses the health, safety, and environmental policy of ONGC, terms used in the industry, causes of accidents, major activities (drilling, production, exploration), and safety practices for each. It also covers risk assessment and analysis, technologies to enhance fire and life safety, and concludes by emphasizing the importance of addressing potential health risks early in project planning processes.
HSE Engineer
HSE professional with twelve years plus experience in the construction/manufacturing industry – buildings, infrastructure, pre-cast concrete and fabrication of heavy steel structures/equipment in oil/gas sector with basic qualifications in Electrical engineering and additional qualifications in health safety and environment. Highly pro-active and articulate in communication and possessing excellent leadership, management and persuasive skills to bring about changes in the work culture particularly on health, safety and environmental issues.
Safety equipments
This document discusses various safety considerations and protocols for construction sites. It covers why safety is important, different types of safety risks like electrical, chemical and fire safety. It outlines personal protective equipment that should be worn like hard hats, gloves, safety glasses. It provides safety rules for construction sites regarding speed limits, unauthorized access. It discusses hazards and how to control them through measures like clean worksites, ladder safety, lifting precautions, training programs and having an emergency response system. Personal protective equipment and clothing of different classes are also outlined.
MUSADDIQ UPDATED CV
This resume is for Musaddiq Shah, who is applying for the position of Safety Officer/Supervisor. He has over 3 years of experience in health, safety, and environment roles. He holds several safety certifications and speaks multiple languages. His responsibilities have included inspecting worksites for hazards, ensuring scaffold and lifting equipment safety, conducting safety training programs, and maintaining safety compliance and statistics.
ANAND HSE- CV
The letter is a cover letter from Anand Kumar C S applying for the position of HSE Advisor. He has 8 years of experience in manufacturing and marine industries. He currently works as an HSE Engineer at Jurong Shipyard Pte Ltd in Singapore. He has strong experience in project safety management, risk assessment, hazard identification, and safety systems. He holds certifications in NEBOSH, fire safety, and hazard identification. He believes he can significantly contribute to maintaining high safety standards based on his experience.
saqib cv 1 (1)(1)
This document contains the resume of Muhammad Saqib for the role of a Health, Safety & Environment professional. It outlines his objective of conducting safety evaluations and surveys to ensure compliance with regulations. It describes his job duties such as circulating safety materials, inspecting workplaces, maintaining safety records and ensuring staff training on fire safety and first aid. It also provides details of his 4.7 years of international and domestic work experience in safety roles, along with his education qualifications and computer skills.
Safety health and environment
This document outlines the safety, health, environment and security plan for PT. Karinda Daya Perkasa. It discusses establishing a SHE management system to ensure work is performed safely and healthily. The contractor will base their site SHE program on 5 pillars: identifying risks, cultivating a safety culture, supervision, following safe work procedures, and inspections/audits. The plan also discusses organizing a safety committee, coordination internally and externally, and implementing programs like basic SHE rules, training, permitting, fire prevention and emergency response.
CV NADAKKAL (2)
This document is a curriculum vitae for Roopesh Nadakkal, who has over 7 years of experience as a Health, Safety, and Environment (HSE) Officer working in oil, gas, and infrastructure construction projects in the United Arab Emirates, Saudi Arabia, and India. He holds several professional health and safety qualifications and has worked on projects such as airport construction in Abu Dhabi and refinery expansion projects in Saudi Arabia. His responsibilities have included implementing health and safety policies, conducting risk assessments, investigating incidents, and ensuring compliance with regulations.
Similar to VJ Presentation 3 Oct 2022.pptx (20)
Job Safety Analyses For Energization of Substation..doc
Job Safety Analyses For Energization of Substation..doc
Recently uploaded
Sri Guru Hargobind Ji - Bandi Chor Guru.pdf
Sri Guru Hargobind Ji (19 June 1595 - 3 March 1644) is revered as the Sixth Nanak.
• On 25 May 1606 Guru Arjan nominated his son Sri Hargobind Ji as his successor. Shortly
afterwards, Guru Arjan was arrested, tortured and killed by order of the Mogul Emperor
Jahangir.
• Guru Hargobind's succession ceremony took place on 24 June 1606. He was barely
eleven years old when he became 6th Guru.
• As ordered by Guru Arjan Dev Ji, he put on two swords, one indicated his spiritual
authority (PIRI) and the other, his temporal authority (MIRI). He thus for the first time
initiated military tradition in the Sikh faith to resist religious persecution, protect
people’s freedom and independence to practice religion by choice. He transformed
Sikhs to be Saints and Soldier.
• He had a long tenure as Guru, lasting 37 years, 9 months and 3 days
OOPS_Lab_Manual - programs using C++ programming language
This manual contains programs on object oriented programming concepts using C++ language.
一比一原版(uoft毕业证书)加拿大多伦多大学毕业证如何办理
原版一模一样【微信：741003700 】【(uoft毕业证书)加拿大多伦多大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
This study Examines the Effectiveness of Talent Procurement through the Imple...
In the world with high technology and fast
forward mindset recruiters are walking/showing interest
towards E-Recruitment. Present most of the HRs of
many companies are choosing E-Recruitment as the best
choice for recruitment. E-Recruitment is being done
through many online platforms like Linkedin, Naukri,
Instagram , Facebook etc. Now with high technology E-
Recruitment has gone through next level by using
Artificial Intelligence too.
Key Words : Talent Management, Talent Acquisition , E-
Recruitment , Artificial Intelligence Introduction
Effectiveness of Talent Acquisition through E-
Recruitment in this topic we will discuss about 4important
and interlinked topics which are
FUNDAMENTALS OF MECHANICAL ENGINEERING.pdf
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
EMERSON EDUARDO RODRIGUES
Impartiality as per ISO /IEC 17025:2017 Standard
This document provides basic guidelines for imparitallity requirement of ISO 17025. It defines in detial how it is met and wiudhwdih jdhsjdhwudjwkdbjwkdddddddddddkkkkkkkkkkkkkkkkkkkkkkkwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwioiiiiiiiiiiiii uwwwwwwwwwwwwwwwwhe wiqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq gbbbbbbbbbbbbb owdjjjjjjjjjjjjjjjjjjjj widhi owqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq uwdhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhwqiiiiiiiiiiiiiiiiiiiiiiiiiiiiw0pooooojjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj whhhhhhhhhhh wheeeeeeee wihieiiiiii wihe
e qqqqqqqqqqeuwiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiqw dddddddddd cccccccccccccccv s w c r
cdf cb bicbsad ishd d qwkbdwiur e wetwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww w
dddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddfffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffw
uuuuhhhhhhhhhhhhhhhhhhhhhhhhe qiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc ccccccccccccccccccccccccccccccccccc bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbu uuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuum
m
m mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm m i
g i dijsd sjdnsjd ndjajsdnnsa adjdnawddddddddddddd uw
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...Paris Salesforce Developer Group
Build the Next Generation of Apps with the Einstein 1 Platform.
Rejoignez Philippe Ozil pour une session de workshops qui vous guidera à travers les détails de la plateforme Einstein 1, l'importance des données pour la création d'applications d'intelligence artificielle et les différents outils et technologies que Salesforce propose pour vous apporter tous les bénéfices de l'IA.Determination of Equivalent Circuit parameters and performance characteristic...
Includes the testing of induction motor to draw the circle diagram of induction motor with step wise procedure and calculation for the same. Also explains the working and application of Induction generator
Blood finder application project report (1).pdf
Blood Finder is an emergency time app where a user can search for the blood banks as
well as the registered blood donors around Mumbai. This application also provide an
opportunity for the user of this application to become a registered donor for this user have
to enroll for the donor request from the application itself. If the admin wish to make user
a registered donor, with some of the formalities with the organization it can be done.
Specialization of this application is that the user will not have to register on sign-in for
searching the blood banks and blood donors it can be just done by installing the
application to the mobile.
The purpose of making this application is to save the user’s time for searching blood of
needed blood group during the time of the emergency.
This is an android application developed in Java and XML with the connectivity of
SQLite database. This application will provide most of basic functionality required for an
emergency time application. All the details of Blood banks and Blood donors are stored
in the database i.e. SQLite.
This application allowed the user to get all the information regarding blood banks and
blood donors such as Name, Number, Address, Blood Group, rather than searching it on
the different websites and wasting the precious time. This application is effective and
user friendly.
Object Oriented Analysis and Design - OOAD
This ppt gives detailed description of Object Oriented Analysis and design.
Supermarket Management System Project Report.pdf
Supermarket management is a stand-alone J2EE using Eclipse Juno program.
This project contains all the necessary required information about maintaining
the supermarket billing system.
The core idea of this project to minimize the paper work and centralize the
data. Here all the communication is taken in secure manner. That is, in this
application the information will be stored in client itself. For further security the
data base is stored in the back-end oracle and so no intruders can access it.
Open Channel Flow: fluid flow with a free surface
Open Channel Flow: This topic focuses on fluid flow with a free surface, such as in rivers, canals, and drainage ditches. Key concepts include the classification of flow types (steady vs. unsteady, uniform vs. non-uniform), hydraulic radius, flow resistance, Manning's equation, critical flow conditions, and energy and momentum principles. It also covers flow measurement techniques, gradually varied flow analysis, and the design of open channels. Understanding these principles is vital for effective water resource management and engineering applications.
Accident detection system project report.pdf
The Rapid growth of technology and infrastructure has made our lives easier. The
advent of technology has also increased the traffic hazards and the road accidents take place
frequently which causes huge loss of life and property because of the poor emergency facilities.
Many lives could have been saved if emergency service could get accident information and
reach in time. Our project will provide an optimum solution to this draw back. A piezo electric
sensor can be used as a crash or rollover detector of the vehicle during and after a crash. With
signals from a piezo electric sensor, a severe accident can be recognized. According to this
project when a vehicle meets with an accident immediately piezo electric sensor will detect the
signal or if a car rolls over. Then with the help of GSM module and GPS module, the location
will be sent to the emergency contact. Then after conforming the location necessary action will
be taken. If the person meets with a small accident or if there is no serious threat to anyone’s
life, then the alert message can be terminated by the driver by a switch provided in order to
avoid wasting the valuable time of the medical rescue team.
Recently uploaded (20)
Advancements in Automobile Engineering for Sustainable Development.pdf
Advancements in Automobile Engineering for Sustainable Development.pdf
comptia-security-sy0-701-exam-objectives-(5-0).pdf
comptia-security-sy0-701-exam-objectives-(5-0).pdf
SENTIMENT ANALYSIS ON PPT AND Project template_.pptx
SENTIMENT ANALYSIS ON PPT AND Project template_.pptx
OOPS_Lab_Manual - programs using C++ programming language
OOPS_Lab_Manual - programs using C++ programming language
This study Examines the Effectiveness of Talent Procurement through the Imple...
This study Examines the Effectiveness of Talent Procurement through the Imple...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
Determination of Equivalent Circuit parameters and performance characteristic...
Determination of Equivalent Circuit parameters and performance characteristic...
VJ Presentation 3 Oct 2022.pptx
- 1. REPORT OF HAZARDS FOR CHILL WATER PIPING INSTALLATION (WELDING) at Kobelco (M) Sdn. Bhd SAFETY AND HEALTH OFFICER EXAMINATION PAPER 4 – PART II Name : VIEJAY a/l BALACHANDAR Index No : NS14262 I/C No. : 931106-08-6291
- 2. T.T.E ENGINEERING (M) SDN BHD has successfully registered to Construction Industry Development Board Malaysia (CIDB) Grade G7 on 10th September 1996 INTRODUCTION T.T.E ENGINEERING (M) SDN BHD is a subsidiary company of TAKASAGO THERMAL ENGINEERING CO. LTD . Since development from 2 local engineers now has over 40 staffs The new project under TTE Engineering (M) Sdn Bhd is the Cleanroom setup in Keysight
- 4. OBJECTIVES To conduct risk assessment by determination of the likelihood and severity for each of the identified safety and health hazards. To identify critical safety and health hazards in the process of chill water pipe installation activity. To identify and explain the proposed control measure for each critical health and safety hazards
- 5. METHODS USED IN IDENTIFYING THE HAZARD • A thorough description of task to be performed • Identify the hazards associated with each steps • Develop a work plan that includes safety work procedures that will be implemented to control the hazards identified. Job Safety Analysis (JSA) Document Review • Accident Statistics • JSA, PTW, ERA, HIRARC • Manual of Products • Assigned personnel from Kobelco HSE Team Would come and observe the safety and health matters every week • The personnel would fill up the weekly Inspection form for any findings to be rectified immediately
- 6. Method of Risk Assessment Source: Guidelines for Hazard Identification. Risk Assessment and Risk Control (HIRARC), 2008
- 9. Discussions Most critical Safety hazard is working at height (Without fall protection) The Likelihood is 3 Conceivable The severity is 2 • Unsafe working environment It is considered a daily routine • Intermittent exposure to particular hazard. • No of control measures taken to tackle the failing from height hazard • Knowledge towards the hazard is adequate as competent/trained personnel are used. Minor
- 10. Discussions . Most critical Health hazard is Inhalation of welding fumes • Routine job require frequent exposure. Prolong duration of exposure to particular hazard The likelihood is 4 • • Proper control measures are in place Adequate involvement of both employer and employee would make the consequence of accident if happens as inconsequential The severity is 2 • Minor Possible
- 11. Recommendations Recommendations for Safety Hazard‘s • HIERARCHY OF CONTROL PROPOSED PREVENTIVE OF CONTROL MEASURE ELIMINATION N/A SUBSTITUTION ISOLATION ENGINEERING CONTROL use of stairway-type ladders, ADMINISTRATIVE CONTROL Training for WAH, Effective monitoring, MOS review system by EHS, Inspection on the tools and welfare provisions Barricade the working area, competent scaffolder / CF for chain block PERSONAL PROTECTIVE EQUIPMENT Double lanyard safety harness with absorber, cut resistant gloves, non slip steel toe boot, eye wear with side shield - Scissor lift or Boom lift N/A
- 12. Recommendations Recommendations for Health Hazard‘s • HIERARCHY OF CONTROL PROPOSED PREVENTIVE OF CONTROL MEASURE ELIMINATION Cold joining techniques SUBSTITUTION switching to shielded metal arc welding (SMAW) / to gas metal arc welding (GMAW) ISOLATION ENGINEERING CONTROL To use an on-torch extraction (expensive but plausible) ADMINISTRATIVE CONTROL conducted pre-daily site inspection by site supervisor, Effective monitoring, PTP system, Inspection on the tools and PPE weekly, Barricade the working area and proper signage's, sufficient exhaust fan PERSONAL PROTECTIVE EQUIPMENT N/A Heat resistance clothing, heat resistance gloves, face shield, respirators high cut fire resistance boots, fire extinguisher
- 13. Review Program on Proposed Measure Control For Safety Hazard • Schedule audit • Interview workers • Medical surveillance • PDCA(Plan, Do, Check,Act) • JSA/HIRARC • SMBWA For Health Hazard
- 14. Benefits of the Recommendation to the Organization Increase productivity. Protect company’s image from bad reputation. Provide safe and healthy environment. Compliance with legal requirement Cost of operation can be reduced.
- 15. Thank You