CFIA 2012 Food Industry ingredients Competitive Intelligence Report

13-14-15 March 2012
Rennes, France – Parc des expositions

Pour tous renseignements : contact@veillesalon.com
Tél. 08 71 57 21 78 - Fax. 01 34 35 04 89
Une prestation réalisée par la société VIEDOC
Un site produit et édité par VIEDOC Solutions
2 rue les bains
8 rue de Malleville, 95880 EnghienHélène Boucher, 78280 Guyancourt

Pour tous renseignements : contact@veillesalon.com - Tél : +33(0)1 30 43 45 27
Sites web : www.veillesalon.com et www.viedoc.fr

Page |2

TABLE OF CONTENT
Table of content ......................................................................................................................................... 2
Abstract ...................................................................................................................................................... 4
Introduction................................................................................................................................................ 5
Attractive & Convenient solutions ............................................................................................................. 6
1.1
Natural and traditional looking packaging solutions.................................................................. 7
1.1.1 Gault&Fremont: Home-made looking baking molds .......................................................... 7
1.1.2 Emin Leydier: Back to basics for cardboard packaging solutions ....................................... 9
1.2
Convenient packaging solutions ................................................................................................. 9
1.2.1 EtikOuest: New open&close system ................................................................................... 9
1.2.2 Torus Pak: Straight-to-plate packaging ............................................................................. 11
1.2.3 Plus Pack: Ready2Cook range ........................................................................................... 14
Packages with lower environmental footprint......................................................................................... 15
1.3
Using less material and making packages lighter ..................................................................... 16
1.3.1 DuoPlast: Stronger stretchable films ................................................................................ 16
1.3.2 Acti Pack: “Hot Fill” PET container .................................................................................... 18
1.3.3 Knauf Industries: Lighter ready-to-eat container ............................................................. 19
1.4
Making recycling easier with mono-material packages ........................................................... 20
1.4.1 Plastic Force: All APET tray system for seafood and meat products ................................ 20
1.4.2 Knauf Industries: Sealable self-absorbing fish and meat tray .......................................... 21
1.4.3 Serap Packaging: All APET tray and top film system......................................................... 22
1.5
Making recycling easier with composite packages .................................................................. 23
1.5.1 Cgl Pack: Optimum range ................................................................................................. 23
1.5.2 Velfor: Eco-designed package for ready to eat meals ...................................................... 25
1.6
Using materials comprising recycled or renewable ressources ............................................... 26
1.6.1 Klöckner Pentaplast: Incorporating recycled or bio-based materials............................... 26
1.6.2 Sharpak: c-LOW trays ........................................................................................................ 28
1.6.3 San Cayetano France: Pulp trays....................................................................................... 29
1.6.4 Flexico: Bio-based press-to-close sliders .......................................................................... 30
Optimized machines and equipments...................................................................................................... 33
1.7
Machines .................................................................................................................................. 33
1.7.1 MLB Opercula: New machine for liquid and semi-liquid products ................................... 33
1.7.2 Tramper Technology: Separating large packs at high speeds........................................... 36
1.8
Equipments............................................................................................................................... 37
1.8.1 Craemer: Flexible and cost effective alternative to wood pallets .................................... 37
1.8.2 MDM: Wood Plastic composite foldable pallet surrounds .............................................. 39
1.8.3 D&B France: Stackable lightweight plastic pallets ............................................................ 39
Conclusion ................................................................................................................................................ 41
A Propos de Veille Salon ........................................................................................................................... 42
Présentation de Viedoc Sarl ..................................................................................................................... 43

© VIEDOC - Pour tout renseignement : contact@veillesalon.com

Page |3

DISCLAIMER

Ce rapport a été élaboré à partir des interviews réalisées par nos soins auprès des exposants présents
sur l’événement incriminé, de la collecte d’information et de son analyse lors des conférences qui s’y
sont tenues et de la compilation des résultats de recherches issus d’une veille internet postévénement.

Ainsi, les données qui figurent dans ce rapport ont strictement valeur d’information. Bien que l’objectif
soit de diffuser des informations actualisées et exactes, VEILLE SALON ne peut pas garantir le résultat
et tout préjudice qui pourrait résulter de l’utilisation de ces informations ne pourra lui en être imputé.
L’utilisation ou la reproduction de tout ou partie de ce document est interdite sans l’accord écrit
préalable de VEILLE SALON.

Pour obtenir l’intégralité des conditions d’utilisation de ce rapport, merci de nous contacter.


Page |4

ABSTRACT
Abstract:
CFIA has now become the place to be and go for professionals of the food business. Indeed, this is the
only exhibition in France gathering under one roof the whole of the food industry suppliers providing
Ingredients & Additives, Equipments & Food processing and Packaging. Some of the packaging
solutions shown, like wooden or paper baking molds, are definitely only aimed at the food industry.
Other packages on display however could very well be used in many other industrial sectors with or
without any adjustments as the trend for lighter, more efficient and eco-designed packages is seen
across all sectors. Backed by growing customer demand for more environmentally friendly products,
sustainable packaging is now sought by many companies that see in them a way of possible cost saving
and definite sales increase.
Key words:
Packaging, eco-designed, LCA, life cycle, convenient, bio-based, biodegradable, compostable,
recyclable, film, tray, punnet, mold, paper, cardboard, pulp, glass, plastic, PET, PE, PP, fibre, fiber, cup,
container, bag, label, slider, pallet, machine, equipment
***
Résumé:
Le CFIA est le salon de tous les professionnels de l’agroalimentaire. C'est en effet le seul salon en
France qui rassemble sous un même toit l'ensemble des fournisseurs de cette l'industrie proposant
Ingrédients & Additifs, Equipements et Solutions de conditionnement. Certaines des solutions
d'emballage présentées, comme les moules de cuisson en papier ou bois, sont destinées uniquement à
l'industrie agroalimentaire. Certaines autres, par contre, sont tout à fait transposables avec ou sans
ajustements car la tendance de fond pour des emballages plus légers, plus efficaces et éco-conçus se
retrouve dans tous les secteurs d’activités. Soutenus par la demande croissante des clients pour des
produits plus respectueux de l’environnement, les emballages « durables » sont de plus en plus
recherchés par de nombreuses entreprises qui voient en eux une source possible d’économies et un
argument marketing fort.
Mots clés:
Emballage, éco-conçu, ACV, cycle de vie, pratique, bio-sourcé, biodégradable, compostable, recyclable,
film, barquette, moule, papier, carton, verre, plastique, PET, PE, PP, fibre, verrine, pot, sachet,
étiquette, zipper, palette, réhausse, machine, équipement


Page |5

INTRODUCTION
CFIA is the only exhibition in France gathering the whole of the food industry suppliers under one roof.
Year after year this exhibition is attracting more and more people and with 1300 exhibitors and nearly
15 000 visitors for this year’s edition, CFIA Rennes has become the place to be for professionals of the
food business.
On the 1300 companies exhibiting 430 were companies involved in packaging, offering either
packaging solutions or packaging equipments. The other companies at CFIA were involved in
Equipments & Food processing (750) and Ingredients (120).
Some of the packaging solutions shown at the show are aimed at the food business only whereas
others are packages can be used in many other industrial sectors with or without any adjustments.
That why VeilleSalon included this exhibition in its 2013 offer whose aim is to provide you with a broad
view of the latest trends and innovations of the packaging industry. As a reminder, the three other
packaging exhibitions VeilleSalon went to or will go to this year are: PCD and Aerosol&Dispensing
Forum (February), Pharmapack (February), and Emballage (November).
For each one of the events, VeilleSalon will write up a comprehensive report with contact names and
phone number, details of the products shown and available corresponding patents. Furthermore, and
at the end of the year a summarized document will be issued and sent to our subscribers.
For more information about this offer, please contact Bruno Galimand on +33 (0)1 43 45 27 or at
bgalimand@viedoc.biz.


Page |6

ATTRACTIVE & CONVENIENT SOLUTIONS
The primary role of packaging is protection. However, in western countries this function is very much
taken for granted and packages are used for marketing purposes and sales development. Indeed,
looking at shelves in supermarkets, we see that brands very much compete on packaging and label
grounds.
Customers are looking for convenient good-looking products. Plastic boxes are becoming more stylish
with glassware looks, dark shades for a luxury feel. Also seeing what is inside the box is reassuring and
we see more and more ready-to-eat food in see-through boxes.

Seraphine glassware launched in 2010(left) and the Box (right) that made 50% of the market in France in 2010
(Source: Europlastiques)

Largely, packages rely on vision to attract our attention, but other senses like smell may also be used
to drive customers’ choice on the supermarket shelf
Aromepack is an aromatic package developed by Spanish company Enplater going beyond common
packaging perception. Aromepack is available with a range of aromas like cinnamon, bread, chocolate,
coffee…

Odorant flexible package developed by Entplater called Aromepack
(Source: Enplater)


Page |7

1.1 NATURAL AND TRADITIONAL LOOKING PACKAGING SOLUTIONS
Today when purchasing a product, customers need to be reassured about quality and safety. They also
want healthy products made with “natural” ingredients they trust. The packaging used may help
convey certain values. Indeed, paper and natural fiber looking trays give food products a more
traditional feel than aluminum trays for instance.
Some companies specialize in this type of paper trays for the baking industry where the home-made
looking of products is particularly appreciated. Italian company Novacart is one of them.
Novacart’s Ecos Paper Baking Mould is an ecological and innovative solution living a traditional image
to sweet and savory products. It has been designed to carry out the double function as a baking mould
as well as tray for its final presentation on the dining-table. It can stand baking in conventional and
microwave oven up to the temperature of + 200°C. Also, the mold does not require greasing or other
treatments for easy release from the customer

1.1.1 Gault&Fremont: Home-made looking baking molds
Address
Gault&Frémont
16, rue des Yvaudières
37700 Saint-Pierre des Corps
France
www.gaultetfremont.com
www.bio-food-pack.com

Contact
Frédéric Leduc
Sales & Marketing Director
Phone: +33 (0)2 47 32 37 80
Mobile: +33 (0)6 42 57 58 44
fleduc@gaultetfremont.fr

In 2010, Gault & Frémont, the French leader for specialty packaging in paper and cardboard, acquired
BioFoodPack, the French manufacturing leader for food containers in parchment paper.
BioFoodPack designs, manufactures and sells vegetable parchment food containers for «ready-to-eat»
meals (mainly for freezing and baking applications).


Page |8

BioFoodPack biodegradable baking molds are designed for agro-food, bakery and pastry sectors and to
the general public. These products are meant to be an alternative to aluminum molds.
BioFoodPack solutions for packaging and cooking exhibit technical performances (high mechanical
strength, grease proof) together with environmental qualities (recyclable raw material, no chemical
products, compostable and biodegradable paper, FSC labeled paper).

FoodBioPack advantages:
Performance:
- stands up to temperatures up to 230°C
- siliconized coating for easy removing
- suitable for use on production lines – unstacks easily (rolled edges)
- internal spiral structure for better resistance
- metal detection not required
- oil and moisture proof
Ease of use:
- suitable for traditional and microwave ovens
- optimal, homogeneous and quick baking
- holds its shape while cooking
Appearance:
- traditional home-made looking presentation of oven baked preparations
- eco-friendlier than aluminum baking molds
More information is available in www.bio-food-pack.com/uploads/100201_BFP_Plaquette_Web_maq.pdf

Page |9

1.1.2 Emin Leydier: Back to basics for cardboard packaging solutions
Address
Groupe VELFOR
Route du Velay
43500 St Pal En Chalencon
France
www.emin-leydier.fr

Contact
Elodie Faudot
Marketing Manager
Phone: +33 (0)4 74 73 19 08
Mobile: +33 (0)6 86 64 40 64
elodie.faudot@emin-leydier.com

The Emin Leydier group is a family run-business that produces paper and packaging products. Emin
Leydier paper mills produce 750,000 tons of corrugating paper annually at 2 production sites in France.
Elytra® produces corrugated packaging suitable for direct food contact in a state-of-the-art plant, built
in 2003 by the Emin Leydier Groupe. Unique in Europe, due to its high level of cleanliness, especially in
terms of hygiene, the elytra production process guarantees:
 Application of Good Manufacturing Practices as used in the pharmaceutical, cosmetics and
food sectors
 Reduction of the dust level in the packaging and dust contamination of the workplace
 Control of hygiene throughout
 Application of the inertia principle for material in direct contact with food
Elytra is certified ISO 9001, has obtained BRC (British Retail Consortium) and Institute of Packaging
accreditation as well as GMP (Good Manufacturing Practices) by Fefco-Esbo.
At CFIA 2012, Elodie Faudot told us that many customers are now asking for « simpler » cardboard
packaging as many companies want to convey a message in line with the respect of the environment.
Boxes developped for those customers are therefore plain with very simple decorations.
Another trend they see is mono-material packaging solutions. Plastic films
traditionnally used to maintain parts within the box are replaced by
cardboard parts and boxes that can be seals without tape are developped .
These all-cardboard packaging solutions are easier to recycle and appeal to
customers caring for the environment.

1.2 CONVENIENT PACKAGING SOLUTIONS
In addition to being reassuring and attractive, packaging solutions must be convenient as customers
are more and more looking for product that allow them to save time and effort.

1.2.1 EtikOuest: New open&close system
Address
EtikOuest
ZA de Soullans
BP 349
85303 Challans
France
www.etikouest.com


Contact
Jean-René Chesne
Sales manager
Phone: +33 (0)2 51 49 17 27
jrchesne@etikouest.com

P a g e | 10
Simplissime is an Open & Close system designed and conceived for airtight bags that can thereby easily
be opened to eat and reclosed to preserve.
A one-use label showing that the bag has never been opened is unstuck from the packaging in order to
make a window appear. This open area can be nearly as wide as the bag and also helps the consumer
take or pour the product easily. The repositionable adhesive disclosed while first opening allow to
reclose the the bag over and over while reducing the volume of the package as the product goes along.
As the bags’ Open & Close system is airtight and resists to steam, it could either be used on grocery or
fresh products’ industry. The repositionable window label can be applied automatically and the film
can be cut off by packing machines, by film printers or even by Etik Ouest.

Simplissime system adapts to bag’s content
(Source: EtikOuest)

Featuring:
 ideal for grocery or fresh products
 adapted to Flow packs, Quadro Seal packs or flat bottom packs
 help the consumer to open an reclose the packaging
 preserve the product as the reclosing system is integrated within the label
 can be applied on any kind of materials even the most delicate ones
Comprising:
 a tamper-proof system to guarantee first opening
 a pull-up corner
 a tear-off moveable part with makes a window appear once it has been removed
 an adhesive system to reclose the package again and again
Advantages:
 airtight system
 easy to open system thanks to the removable label
 bag reclosing is achieved by bending it over
 package volume is reduced along with product use
 film application and cut off is made by film printer or EtikOuest
 customized shape to fit any kind of bags
 cheaper than zip solutions


P a g e | 11

1.2.2 Torus Pak: Straight-to-plate packaging
Address
Torus Pak Europe
Representative office
10 Avenue Vergon
94340 Joinville le pont
France
www.toruspak.com
www.innovativedesign.se

Contact
Laurent Boumendil
Account Manager
Phone: +33 (0)148 831 334
Mobile: +33 (0)614 622 241
laurent.boumendil@toruspak.com

Torus Pak is a packaging solution for the food industry developed by Swedish company Innovative
Design of Scandinavia AB. Torus Pak Europe N.V. sells and markets the patented Torus Pak® packaging
system to the European market under license.
Torus Pak Europe presented for the first time in France their innovative tray at CFIA Rennes 2012. The
pack is already established in countries like the Nederland, the UK and Germany, but not really known
in France.
This is a “Straight-to-Plate” packaging solution for single portion meals that features a removable
bottom which offers the unique possibility to easily serve the packaged meal on a plate, and still have
the food presented as it was in the package. Indeed, unlike existing trays, Torus-Pak opens from the
bottom, giving customers a restaurant quality meal, in their own home!

Torus Pak’s ingenious system is easy to use and allows stunning food presentation
(Source: Torus Pak)

This feature opens up completely new possibilities for the whole food industry, from restaurants and
caterers to the largest ready meal manufacturers, where current package solutions force the end users
to eat out of the tray or shovel the contents onto their plates.

P a g e | 12
As these solutions can’t offer an attractive presentation, the consumer acceptance of ready meals is
affected in a negative way. By offering meals that are ready to be served on plates, hotels, caterers
and ready meal producers can reach new markets and customers.
“Using the Torus Pak trays for our meals can help us saving both time and money as we’ll be able to
serve our clients perfectly presented meals for a minimal effort”, said Martin and Victoria at First
Choice Catering in Hertfordshire, who started using Torus Pak in February.
Torus Pak’s unique solution has been named winner of two prestigious innovation awards the last two
years: Food Hospitality Innovativeprijs in the Netherlands 2010, and the Packaging Innovation Award in
Sweden 2011.

Benefits and features:
• A unique solution for all types of prepared food. The system combines Torus Pak
trays, top film and a Torus Pak sealing machine.
• All Torus Pak trays are easy and simple to use, and have been tested on consumers of
all ages and abilities.
• The Torus Pak tray has all the same features as a traditional tray in strength and
appearance but includes the additional feature of a pull tab that opens the package
from the bottom. To use the tray simply pull the tab to open the bottom and the
freshly cooked meal is perfectly presented on the plate.
• MAP packaged meals can be accommodated.
• The tray and film are polypropylene – can be frozen and reheated in the microwave
To view the striking result Torus Pak allows you to get on: www.youtube.com/watch?v=R7BfN5nwrAQ
Torus Pak is filled and sealed as usual and tolerates pasteurizing, MAP (modified atmosphere), and
tough handling. Torus Pak is made of PP and can be heated in the microwave. The important
difference is that it opens from the bottom by pulling the bottom off.
Torus Pak offers a packaging solution that is both innovative and environmentally friendly. The thin
bottom on the Torus Pak reduces the amount of material that is used, which in turn reduces the
impact on the environment – both in production and recycling.
Effective logistics solution
Torus Pak trays are specially designed for transport on European pallets that hold 15 boxes
with 720 Torus Pak trays each. Torus Pak therefore can deliver 10 800 trays per pallet, which is
not only the market’s most effective logistics solution, but also reduces emissions due to the
decrease in transportation.
Less material consumption
Torus Pak is designed to complement a standard European plate (210 mm in diameter),
thereupon the tray has no unnecessary surfaces. The thin bottom on the Torus Pak tray also
means that it has been possible to reduce the weight by up to 30% compared to similar tray
solutions. This reduced material consumption leads in its turn to reduced impact on the
environment by production, transportation, and waste management.


P a g e | 13
Standard range includes rectangular and circular trays with foils at the bottom and on top. Additional
stiff lid may be provided for premium food preparations.

Innovative Design of Scandinavia have filled 6 patents regarding their innovative tray pack. The main
one is detailed below.
→ Torus Pak’s main patent details
Title: TRAY WITH SEPARATE BOTTOM AND METHOD FOR PRODUCING SUCH A TRAY
Patent number: WO2012002884
Publication date: 2012-01-05
Abstract: A disposable tray (1 ) comprising a side wall module (2) and a bottom (7), where the bottom (7) is a
separate bottom attached to the side wall module (2), where the bottom (7) is fixedly attached to the side wall
module (2) and where the bottom (7) consists of a foil that is thinner than the walls of the side wall module (2).
The invention also discloses a method for producing a tray with a separate bottom.


P a g e | 14

1.2.3 Plus Pack: Ready2Cook range
Address
Plus Pack SAS
ZI Les Fromentaux
38270 Beaurepaire
France
Phone: +33 (0)4 74 79 07 11
www.pluspack.com

Contact
Jean-Michel Sabathier
Director of Sales for France & Belgium
Phone: +33 (0)4 74 79 07 11
Mobile: +33 (0)6 46 45 46 76
j.sabathier@pluspack.com

Plus Pack is an innovative international company that manufactures aluminum and thermo-formed
plastic packaging for food products. Founded in 1963, Plus Pack has operations in seven countries
across Europe, with production and warehousing facilities are located in Denmark and Belgium.
At CFIA Rennes 2012, Plus Pack presented their Ready2Cook range developed a couple of years ago. In
France, ready to cook meals are not much sought after, but some countries in Europe see in these
products a real alternative to fast-food. Moreover, these convenient meals allow customers to have
well balanced and healthy meals.
Ready2Cook is therefore a packaging solution that allows companies to offer consumers the
opportunity to provide fresh, wholesome, ready-made meals that consumers can put directly in the
oven at home.
Ready2Cook trays can be packed in a modified atmosphere and hermetically sealed to preserve
freshness. A clear anti-fog treated OPS click-on dome lid is also available. After usage the alufoil
containers are easily recyclable.

With more than 30 standard smoothwall aluminum container styles, the Ready2Cook® range provides
a solution for every demand. All containers are made of quality aluminum, which offers optimal barrier
properties, good thermal conductivity, cold and heat resistance and decorative properties. New sizes
and shapes are continuously added to the range.


P a g e | 15

PACKAGES WITH LOWER ENVIRONMENTAL FOOTPRINT
Sustainability is a mega-trend amongst all industrial sectors and packaging solutions having a lower
impact on the environment are sought in order make more efficient use of natural resources and
energy.
Indeed, the 3R principle for better packages state that reusing, recycling and reducing may help deal
with increasing amount of packaging waste treatment, gas emissions, and scarcity of fossil resources…
Life Cycle Assessments (LCA) is a measurement tool that allows to compare the burden on the
environment of different package solutions and to choose the best possible packaging for a given
product and use.

Also, LCA, when part of an eco-design strategy, makes it possible to take into consideration the whole
life of the packaging solution, from the raw material used to the packaging end of life with disposal.
The basic idea of eco-designing is to minimize the packaging environmental footprint.
The main ideas we see companies developing today to minimize the carbon footprint of their packages
are basically:
- Making lighter packages with expended PET and PS (Clocker pentacles) and glass replacement
for instance.
- Using less material with thinner films and walls…
- Making recycling easier with mono material, easy to separate composite packages…
- Facilitating packaging end of life treatment with biodegradable materials.
Optimized packages can feature two or more of these ideas. For instance, composite packages whose
plastic pot and cardboard parts are easily separated are optimized in terms of raw materials in order to
make the solution cost effective. Indeed, these pots wich are optimized in terms of raw material,
recycling and cost are a very good exemple of what can be done in package eco-design.

P a g e | 16

1.3 USING LESS MATERIAL AND MAKING PACKAGES LIGHTER
Many companies specialized in coextruded films have optimized their solutions in order to get
improved environemental footprint.
This is the case for instance of Spanich based company Plastienvase
which now offers films that are thinner and that therefore have a
lower impact on the environment.
Companies that choose their new SOL film, which is thinner than
previous solutions, also benefits from reduced costs on storage,
transport and ecotax.
This film material can be transparent (SOL NATURAL) or opaque (SOL BLANCO) and consists of a
multilayer co-extrusion with EVOH barrier. It is available from 25 microns on and can be laminated
with PET, OPA, or PP films.
Another company, Vezelpas from Portugal also presented films with reduced thickness at CFIA 2012.
Their latest 7 layer coextruded films are said to have the same thickness as the 5 layer ones with added
properties and increased performances.
Films are very much used in packaging, be it in primary packages as above or as secondary or tertiary
packaging like in the case of gathering plastic bottle or securing packs on pallets.

1.3.1 DuoPlast: Stronger stretchable films
Address
Duo Plast SAS
Service Commercial
12, avenue de la Lauzière
92600 Asnières sur Seine
France
www.duo-plast.fr

Contact
Sophie Cornilleau
Sales Manager
Phone: +33(0)147 30 35 89
Mobile: +33 (0)616 19 22 82
sophie.cornilleau@duo-plast.fr

Duo Plast is a German manufacturer of stretch films used in the industrial and agricultural sector and
for the packaging of food. At CFIA 2012, Duo Plast presented Duo Food Contact and their patented
stretch film with double edges called DDK.
Duo Food Contact is highly stretchable so less material is need
Duo Food Contact film has been specifically developed for direct food
contact and is certified according to the latest EU Regulation 10/2011.
According to Duo Plast, this approval for direct food contact goes far
beyond the well-known food-safety legislation: Not only the separate
raw materials are assessed to be safe, but also the entire film fulfils
close migration limits.
Duo Plast produces the film under strictest hygiene rules within the
global standard BRC / IoP. In Europe the compliance with the new EU
regulation in connection with a production according to BRC / IoP for
stretch films is said to be unique so far.


P a g e | 17
The certified film offers entirely new possibilities for the food industry. Duo Food Contact is a blown
stretch film that has outstanding technical properties such as extreme elongation and tear strength.
Thanks to this, the film thickness can be reduced and significant material savings can be realized.
Excellent adhesion properties and restraining forces increase transport security considerably.
Benefits include:
 Environmentally friendly and easily recyclable because of 100% polyethylene – free of PIB
 Excellent transparency
 Extreme extensibility and low noise processing
 High puncture and tear resistance in longitudinal and transverse direction
 Excellent adhesion properties for best connected film layers
 Enormous restraining forces for high transport security
 Completely smooth outer side prevents sticking of pallets
Duo Food Contact is suitable as primary packaging for all kinds of food and for packaging raw materials
for food production. It is available in film thickness of 15 microns with inside or outside cling, and as
machine or hand rolls. It may also be equipped with or without double edge (DDK)
Stretch film with double edges for added strength and tear
resistance while reducing the amount of film used
The world wide patented stretch film DDK has already attracted a lot
of attention. The stretch film has won the "German Packaging Award'
and the 'PIF Gold Medal' and signals a new trend in the field of load
security.
The unique feature of this film is the double edge, which makes it
twice as strong and tear-resistant at the edges compared to
conventional films. In addition, it is one-side cling, one side smooth
and connects the packaged goods optimally with the pallet due to a
string generation at the bottom.
Another very important highlight is the unique net structure that is
generated through the wrapping process. The net structure increases
pallet stability significantly while enormous reductions of material
consumption can be realized.


P a g e | 18
Advantages over standard films:
 Higher tear resistance (static and dynamic)
 Maximum extension 10% higher (compared to DUO standard films)
 Smaller unwinding resistance over the whole roll
 Lower noise level at the unwinding process
 Safe handling on fully automatic machines

→ Duo Plast’s main patent details
Title: FILM WITH REINFORCED BORDERS AND EDGES
Patent number: WO2009049804
Abstract: The present invention relates to films (A) with reinforced borders (B, B') and edges, said films having a
lower risk of tearing of the edges during processing. The invention further relates to a method for producing films
of said kind, to a device for the production of said films, and to the use of said films.

1.3.2 Acti Pack: “Hot Fill” PET container
Address
Acti Pack
Z.I. Sud - 4 rue Louis Antoine Beaunier
42162 Andrézieux-Bouthéon cedex 2
France
Tél. + 33 (0)4 77 55 04 09
www.actipack.fr

Contact
Jean-Erick Marsot
Sales Manager
Jeanerick.marsot@actipack.fr

Acti Pack specializes in Polyethylene Terephthalate (PET) injection blow molded jars and bottles and
manufactures ever-practical and innovative PET jars and bottles.
Acti Pack is established in the following sectors: cosmetics (72%), food (21%), leisure and
miscellaneous products (7%), and proposes 2 product development streams in order to meet
customers’ requirements:
• Standard ranges from 75 to 5000 ml l
• Development to special customer specification.
In partnership with ASB Nissei, Acti PacK have developed the very first PET jars combining very good
resistance to filling temperature, resistance to pasteurization together with a round shape, without
deformation panel for easy labeling.


P a g e | 19

Hot Fill is said to be the first PET jar that can stand high filling temperature
(Source: Acti Pack)

The collar which undergoes a slow crystallization allowing it not to deform at high temperatures, can
be fitted either with a metal cap or with a openproof plastic stopper.
Manufactured according to ISO 22000, PET jar "Hot Fill" is suitable for packaging of jams, sauces,
condiments,… It features many advantages compared to glass as it is :
- lightweight optimizing your logistics costs,
- unbreakable ensuring food packaging safety requirement necessary during filling and to eliminate
any risk of breakage in stores,
- recyclable
- may be manufactured using 25%, RPET to improve the jar’s carbon footprint
« Hot fill » jar Specifications
Collar : Twist Off 63
Volume: 350 ml
Weight : 30 grs
Plastic material : PET
Hot filling : maxi 92°C according to product
Pasteurization : 85°C for 20 minutes then cooling
Cristallized collar

1.3.3 Knauf Industries: Lighter ready-to-eat container
Address
Knauf Industries
Vallon d’eau
47700 Casteljaloux
France
www.knauf-industries.fr

Contact
Sébastien Dugrand
Sales manager
Mobile: +33 (0)6 87 93 34 86
sebastien.dugrand@knauf.fr

Knauf Industries design and produce packaging products for the food and healthcare markets. They
offer a complete range of standard and customized protective packaging.
in addition to their comprehensive range of packaging for the food industry, Knauf presented their
Mov’box made of a injected plastic container and a cardboard cover, and aimed at ready made meals.


P a g e | 20
As explained by S Dugrand, the design allows for a 25% weight reduction compared to standard
injected plastic container, making it a more eco-friendly packaging solution than standard packages.

1.4 MAKING RECYCLING EASIER WITH MONO-MATERIAL PACKAGES
1.4.1 Plastic Force: All APET tray system for seafood and meat products
Address
Plastic Force
2 rue de la Clairière
35770 Vern sur Seiche
France
www.plasticforce.fr

Contact
Frédéric Duval
Managing Director
Phone: +33 (0)2 99 62 16 88
Mobile: +33 (0)6 20 64 28 26
frederic.duval@plasticforce.fr

Established in Belgium and France, Plastic Force has been specializing for over 20 years in the design
and manufacture of thermoformed plastic packaging mainly PS, APET, PETG and PP.
At CFIA 2012, they told us about their mono-material tray development that comprises an APET tray
with an APET skin layer.

Also they have developped, an APET tray with 50% recycled content, especially designed to keep meat
and fish juices away. The tray that includes a build-in self absorbing feature is covered with a
microperforated APET film in order to prevent holes from getting clogged with flesh.
Furthermore unlike packaging solutions comprising absorbing blotters, this tray allows gas to go all
around the packaged product and therfore provides extended shelf life. This latest packaging solution
is not yet available as it is still being developped.

P a g e | 21

1.4.2 Knauf Industries: Sealable self-absorbing fish and meat tray
Address
Knauf Industries
Vallon d’eau
47700 Casteljaloux
France
www.knauf-industries.fr

Contact
Sébastien Dugrand
Sales manager
Mobile: +33 (0)6 87 93 34 86
sebastien.dugrand@knauf.fr

This year at CFIA, in addition to their comprehensive range of packaging for the food industry, knauf
presented a self-absorbant sealable XPS tray for fish and meat products. KARY Peal’s main advantage is
that blotters may not be needed making packaged food more appealing.


P a g e | 22

1.4.3 Serap Packaging: All APET tray and top film system
Address
Sirap France
Route Nationale 7
13 550 Noves
France
Phone: +33 (0)4 90 24 25 22
www.sirapgroup.com/packaging

Contact
Christophe Soyer
Sales Manager
Phone: +33 (0)4 90 24 25 18
Mobile: +33 (0)6 31 41 90 51
soyer.christophe@sirapgema.fr

The Sirap Group has been working in the packaging sector for over 50 years and is one of the main
producers of single-use plastic packaging in Europe. Their range of products include foam and rigid
containers.
Their latest development is an all APET system consisting of a tray and a sealing top film made of the
same material for meat, poultry and fish packaging.

Advantages of the new system are:
 Longer shelf life: due to the performances of gas and liquid barrier, the APET System keeps the
food characteristics unaltered for more than 10 days, that is said to be much longer than with
PP packaging.
 Completely recyclable: the mono material APET system can be recycled in the standard PET
circuit (as for plastic bottles).
 Better transparency: the perfect clarity and gloss of the Freshplus-BT film, combined with the
antifog property garantee a superior presentation of the food in the pack.
 Perfect top sealing: the mechanical properties and the seal resistance ensure superior
protection and easy working conditions on the packaging lines.
 Excellent processability: the APET system offers good processability in terms of denesting and
handling of the trays on packaging lines, and in terms of unrolling and sealability of the top
film.
Standard trays are available in several sizes and in different colours (transparent, black, green,
translucent blue and translucent orange).


P a g e | 23

1.5 MAKING RECYCLING EASIER WITH COMPOSITE PACKAGES
1.5.1 Cgl Pack: Optimum range
Address
Cgl Pack
Route du Velay
74990 Annecy
France
Phone: +33 (0)4 50 27 45 47
www.cglpack.com

Contact
Myriam Bozzetto
Press relation
Phone: +33 (0)4 50 27 45 71
mbozzetto@cglpack.com

Optimum Cup is a patented packaging concept that combines cardboard and plastic for food products
and that can be closed with a lid or a cap seal. The plastic tray is clipped into the cardboard tray
without glue and this combination makes it possible to reduce the thicknesses of materials.


P a g e | 24
The advantages of Optimum include:
• a 45% reduction in environmental impact on :
- consumption of non-renewable energy
- ground pollution (eutrophisation)
- greenhouse gas effect
• easy to recycle thanks to the separation of components
• eco-designed, functional and designer packaging

EcoBilan 3X3® is the tool used by Ggl pack to assess their packages
(Source: Cgl Pack)

Absorbpack is a patented packaging solution for fresh food processing products such as fish, meat,
cheeses that traps thaw drip by keeping it in the studs at the bottom of the tray.

Advantages of Absorbpack are:
• eco-designed solution: no more blotters needed
• economical solution: saving on blotter costs
• aesthetic (food no longer steeps in liquid) and functional solution.


P a g e | 25

1.5.2 Velfor: Eco-designed package for ready to eat meals
Address
Groupe VELFOR
Route du Velay
43500 St Pal En Chalencon
France
Phone: +33 (0)4 71 61 30 51
www.velfor.com

Contact
Angélique Brun
Marketing Manager
Phone: +33 (0)4 71 61 78 00
a.brun@verfor.com

At CFIA 2012, Velfor launched their new eco-designed package comprising a PE laminated cardboard
tray with a see through PP or APET lid.
This packaging is suitable for ready-to-eat fresh meals like salads, ready-made and take-away meals
and for bakery.
This convenient, micro-wavable and stackable package has been eco-designed. It is low weight, 100%
recyclable and vegetal inks have been used.
Standard range include 375, 500, 750 and 1000 ml packs and the lid may incorporate napkin,
seasonning, fork and spoon…


P a g e | 26

1.6 USING MATERIALS COMPRISING RECYCLED OR RENEWABLE RESSOURCES
Amongst companies displaying PET trays, many of them now offer trays made using recycled PET as
this plastic material is perhaps the one that has the best collection and recycling rate. This is due to the
fact that bottled drink consumption has shown a tremendous growth over the past 15 years, and that
most plastic bottle are now made of PET facilitating the development of post-consumer treatment of
empty bottles. Trays, pots and cups made of polypropylene and polyethylene also come in recyclecontaing format as these thermoplastic resins are easy to recycle and very much in used in the
packaging industry.
Besides using post-consumer material, replacing part of the plastic material used with mineral or
vegetal (waste) matter or using bio-based plastics may be some other ways of reducing the burden of
packaging on the environement.

1.6.1 Klöckner Pentaplast: Incorporating recycled or bio-based materials
Address
Klöckner Pentaplast
PO Box 1165
56401 Montabaur
Industriestrasse 3-5
56412 Heiligenroth
Germany
Phone: +49.2602 915 297
www.kpfilms.com

Contact
Carine Gomet
Business Manager France
Phone: +49 2602 915-394
Mobile: +49 170 7847110
c.gomet@kpfilms.com

For more than 40 years Klöckner Pentaplast has been producing rigid films for the food and
pharmaceutical packaging industries.
Kp offers a full range of rigid forming films for food called Pentafood® films that:
 Protect products, extend shelf lives, and ensure safety and hygiene.
 Are specially formulated with unique attributes, such as barrier protection and heat resistance.
 Are manufactured to look great and enhance shelf appeal.
 Perform beautifully on current packaging and converting machines.
SmartCycle® films contain recycled plastic beverage bottles
SmartCycle mono- and multi-layer films offer a range of products with various guaranteed levels (for
example 50 or 70%) of post-consumer recycled plastic bottle content. These films are certified to meet
packaging regulations and to comply with all FDA regulations for direct food contact as well as all
applicable EU regulations and directives for food contact. In addition, the films exceed U.S. California
and Oregon regulations for rigid plastic packaging containers.
These films are used for trays, clamshells, blisters, all-plastic boxes, and various other containers as
well as printed signage and stationery applications.
SmartCycle films provide a plastic packaging option to consumer product companies and retailers
while building long-term value by helping them move toward their sustainable packaging goals.
Because the SmartCycle logo may appear on the plastic containers using this film, consumers can make
educated choices on their purchases.


P a g e | 27

The SmartCycle process of making film from recycled plastic bottles saves energy, natural resources,
and, ultimately, will help spur collection of bottles and potentially custom packaging.
This begins with marking all packages with the SmartCycle logo derived from the petaloid base found
on most PET bottles. A key goal of SmartCycle is to help people feel positive about and responsible for
their packaging choice by conveying the story of sustainable packaging to the entire packaging value
chain (Cycle)—consumers, retailers, OEMs, converters, and resource recovery plants.
Finally, at the end of the use cycle, the goal of the SmartCycle mark is to facilitate actual recycling—not
down cycling. Currently, most municipalities, retailers, and recycling companies collect only bottles
and do not recycle plastic clamshells due to concern for mixing polymer types. With a unique
identifying mark, SmartCycle packages could potentially allow these items to be reprocessed into new
containers along with bottles made from like plastics.
TerraPET™ films consist of up to 30% renewable resource content
Pentaclear®, Pentaform® and Pentafood® rigid TerraPET™ films provide the same brilliant cosmetic
clarity and performance properties as standard APET films and are made in part from sugar cane,
TerraPET films allow companies to replace fossil fuel based material with up to 30% plant based
material.
TerraPET films have the same performance properties as standard APET films so there is no need to
change tooling or package design. These films process on existing equipment in the same
thermoforming range and have the same cuttability as standard APET. With a heat-deflection
temperature of over 145°F, no special handling or logistics are necessary.
Furthermore, as with standard APET films, packages produced with these films can be marked with SPI
resin identification code 1 and waste from thermoforming operations is compatible with existing preconsumer recycling streams.

TerraPET was selected to make thermoformed
clear clamshells for the packaging of AT&T products.


P a g e | 28
TerraPET is a new product that was launched in 2011. It is already in production in the USA, and could
be supplied to any European company if interested.
However, it should be said that as long as bio-based plastics will be a lot more expensive than
conventional fossil-based polymers (twice as expensive in the case of TerraPET) companies will find it
hard to make the vegetal choice.

1.6.2 Sharpak: c-LOW trays
Address
Dyna Plast
rue Just Meisonasse
89600 Saint-Florentin
France
Phone : +33 (0)3 86 43 81 00
www.dynaplast.com

Contact
Sébastien Gall
Sales Manager
Mobile: +33 (0)6 75 61 42 12
sgall@dynaplast.fr

Owning 18 companies in a number of European countries, the family-run Groupe Guillin has
specialised in the manufacture of short-life plastics packaging for the agri-food industries since its
formation in 1972.
One of the group’s company called Sharpak Yate has developped
a tray with low carbon footprint. The c-Low material was
launched in 2011 initially for meat, fish and sausage tray packs.
According to Sharpak, c-LOW is produced using a blend of a
natural mineral, recyclate and virgin polypropylene providing a
significant carbon reduction over conventional polypropylene
punnets.

The firm has also developed the material for its mushroom
punnets :
• c-LOW mushroom packaging represents a 33%
reduction over conventional PP mushroom punnets
• c-LOW is said to be the lowest carbon footprint
punnet available
• c-LOW is blended from post consumer waste stream
and a natural mineral filler content
• c-LOW has the lowest virgin petrochemical content
• c-LOW has a natural non-plastic appearance and is
soft to the touch
• c-LOW is manufactured through the highly efficient
and waste-free Rotary Thermoforming process at
Sharpak Yate.
According to Sharpak, c-LOW trays retain the same mechanical properties as polypropylene trays, with
“excellent chill impact and top load properties and no increase in product weight”.


P a g e | 29

1.6.3 San Cayetano France: Pulp trays
Address
San Cayetano France
Parc d’activités des Châtelets
22 950 Trégueux
France
Phone: +33 (0)296 766 241
www.gruposc.com

Contact
Paul Aberer
Managing Director
Mobile: +33 (0)679 01 13 37
paberer@gruposc.com

Spanish company San Cayetano has developed cellulose packaging solutions for the food and industrial
sectors in order to find a use for scraps from its cardboard boxes production. They provide cellulose
packaging solutions for several applications:
- Modified Atmosphere Packaging applications for fresh meats, fish and poultry with extended
shelf life.
- Dual Ovenable Trays for Ready Meals
- Fresh Fruit and Vegetable packaging solutions -100 % compostable and biodegradable
packaging solutions
The technology to produce trays from cellulose has improved a lot in the past years and Grupo San
Cayetano is now capable to produce the next generation of pulp trays that exhibit:
 Economic competitiveness compared to existing plastic trays as these cellulose solutions are
only 10% more expensive as PP trays
 Quality and performance in terms of:
◦ Heat treatment up to 140 °C
◦ Unequalled Cool - to - Touch
◦ Moisture and water resistant
◦ Oxygen barrier caracteristics for MAP applications
◦ Microwaveability
◦ Biodegradable and compostable
With an easy peeled liner for selective recycling
San Cayetano barrier cellulose trays destined for Modified Atmosphere Packaging applications can be
provided with a pull-tab for peeling off the inside liner after use by the final consumer.

Following the correct instructions indicated on the package, the consumer will open the packaging and
afterwards will peel off the inside liner obtaining the bare cellulose base and the separate plastic liner.
Differentiated waste disposal is possible of the plastic liner (2 to 4 grams) and the remaining 100 %
cellulose tray (20 to 40 grams).
Also available in all biodegradable version
The San Cayetano Fruittray, 100% virgin cellulose, biodegradable and compostable, allows for hermetic
sealing with NewFoodPackaging lidding materials composed of Cellulose or Polyolefin based materials,
all certified according to the European Standard of Industrial Biodegradability EN 13 432.

P a g e | 30
The result is a cellulose tray, allowing for natural respiration rates of the produce and fruit, with
excellent moisture vapor transmission rates, allowing for a natural habitat combined with transparent
biodegradable top sealing film, providing a total sustainable packaging solution. The package is also
available with bio compostable liner.

Also available in micro-waveable and ovenable versions
San Cayetano has developed an innovative packaging solution for Ready Meals based on
Microwaveable Cellulose Trays and Dual Ovenable Trays. This technology combines cellulose trays with
an inside polyolefin liner either suitable for Microwave or Tradional oven.

Consumer testing has confirmed that cellulose trays provide an immediate perception of sustainable
packaging and user-friendlyness. The cellulose structure gives this tray technology severalkey features:




Cool To Touch feature: No other existing tray can withstand the oven temperatures and
give such a convincing Cool To Touch as the cellulose trays. Tray temperatures remains
below 47 °C, comfortable touching temperatures with inside boiling water.
Tray Rigidity during heat treatments: Unlike CPET, the Cellulose trays keep their rigidity
during heat treatment. This is a great safety feature versus existing CPET trays (at 65 °C
CPET trays are soft and unsteady).
Disposal after Use: Consumers immediately perceive cellulose as sustainable packaging
material and value the disposal friendly feature of cellulose trays.

The company already presented the cellulose trays at last year’ CFIA, and Managing Director Mr.
Aberer, told us that first deliveries were made earlier this year.

1.6.4 Flexico: Bio-based press-to-close sliders
Address
1 route de Méru
Hénonville
60544 Méru Cédex
France
Phone: +33 (0)3 44 49 49 49
www.flexico.com

Contact
Philippe Courtois
Sales Director
Phone: +33 (0)3 44 49 49 13
Mobile: +33 (0)6 86 41 75 92
p.courtois@flexico.fr

P a g e | 31
Founded in 1950, the FLEXICO group, with headquarters in the north of France, has become the
European leader in the field of flexible resealable packaging. Their range of resealable and recloseable
bags is produced in 5 factories: 3 factories in France, 1 in Germany and 1 in Spain.
With a wide range of technical solutions on offer, Flexico satisfies the requirements of most markets,
such as foodstuffs, textile, hygiene, health & beauty, gardening, electronic as well as the consumer
market (freezer bags...). Thanks to its Research and Development department, Flexico is able to adapt
to customer's packaging requirements and guarantees competitive and innovative "turnkey" solutions.
At CFIA 2012, Flexico presented their latest packaging developments:
- Doypack® with stopper: the aluminum pouch with stopper offers a graet barrier towards
gases, smells, moisture and UV
- Latest Zipgrip® solutions: These slider profiles allow bags to be easily opened and closed.
- Joker® "Ensacheuse 535": This compact machine allows optimum filling of Joker bags

Joker® "Ensacheuse 535" developed by flexico
(Source: Flexico)

→ Flexico’s main patent details
Title: MACHINE FOR AUTOMATIC PLACEMENT OF SLIDERS AND ASSOCIATED METHOD
Patent number: EP2248436
Abstract:
The machine has a spreader guide (300) placed opposite to a slide placing device.
The spreader guide has a guiding channel i.e. rabbet (310a), in which closing
profiles (20) are rotated, where the spreader guide is made of plastic or metal.
Width of the channel is lower than thickness of an anchorage unit such that the
anchorage unit is not penetrated in the channel when the profiles are supplied by
the supply unit. A portion (23) of the closing profiles subjacent to the anchorage
unit is pinched by walls of the channel to separate respective free ends (21) of the
closing profiles. An independent claim is also included for a method for
automatically placing a slide on closing profiles.


P a g e | 32
In addition to their traditional range of slider and zipper profiles in polyethylene and polypropylene,
Flexico now proposes a biodegradable version called Biozip® and a bio-based version called
NatureZip®.
Biozip® profiles are suitable for food contact and are manufactured from renewable resources (such as
maze or sunflower) and comply with EN 13432 for biodegradable packagings. They may be welded
onto compostable films.

Biozip®is Flexico’s biodegradable zipper profile
(Source: Flexico)

NatureZip® profiles are made from bio-based polyethylene (PE) synthesized from sugar cane or beet.
They are suitable for food contact and have the sale physical and chemical properties as petroleum
based polyethylene profiles. They may be welded onto any film displaying a PE layer.

NatureZip® is Flexico’s bio-based PE zipper profile
(Source: Flexico)


P a g e | 33

OPTIMIZED MACHINES AND EQUIPMENTS
1.7 MACHINES
1.7.1 MLB Opercula: New machine for liquid and semi-liquid products
Address
MLB Opercula
44 rue Roger Salengro
69743 Genas Cedex
France
Phone: +33 (0)472 472 525
www.mlb.fr

Contact
Henri Jouve
Sales Director
Phone: +33 (0)472 472 518
Mobile: +33 (0)613 395 974
henri.jouve@mlb.fr

Created in 1928, MLB Opercula is today a leader in membrane seals and covers. They develop reliable
and sustainable closure systems and machines for all types of sensitive products (e.g. agrifood,
cosmetics, pharmaceuticals…).
Up to recently, MLB Opercula’s range of machines included four
systems: MLB Piana, MLB Moderata, MLB Allegra and MLB Velocia.
Since CFIA 2012, their range also comprises MLB Optima.
MLB Optima has been especially developed for dairy transformers. The
machine allows the conditioning of liquid and semi-pasty products
(yoghurts, cream, fromage frais ...) in pots or unstackable cups. It can
process 50 mm to 116.5 mm wide containers.
This simple machine is very robust and easy to maintain It may also be
customized according to specific needs and its price is attractive as the
basic machine only costs 29 000 euros.


P a g e | 34


P a g e | 35


P a g e | 36
Also presented at CFIA 2102 was izy’O, a partially open lid that allows to have control on liquids or
powder flowing from the jar. This solution is suitable for nomad consumption of all types of yogurt cup
or bottle. To open the lid, users simply pull up the tab. Aluminum lid tear up precisely.

1.7.2 Tramper Technology: Separating large packs at high speeds
Address
Tramper Technology BV
Postbus 2 4430
AA 's-Gravenpolder
The Netherlands
Phone: +31 (0)113 31 28 11
www.trampertechnology.nl

Contact
Barry Moeleker
Sales & Technical Support
Mobile: +31 (0)6 20 43 93 29
bm@ttbv.nl

Tramper Technology (formerly Tramper Techniek) develops and produces machines and complete
production lines for the food processing and packaging sector.

P a g e | 37
Tramper offers sophisticated, servo-controlled multi-denesters with high level of flexibility. The
equipments can separate dishes, trays, blisters or lids from 1 to 16 pieces simultaneously. Their multidenester range includes 3 models.
At CFIA 2012 and for the first time in France, Tramper Technology presented their largest denester
equipment. The Tramper D-3100 is a multi-denester with a large denesting range that is ideal for
applications where relatively large packages must be separated at high speed.
Features of the D-3100-P are:
 Single and multiple denesting of single compartment and
multiple compartment products.
 Suitable for single or double track denesting.
 Available as a stand-alone system or integrated into the
line control.
 Denesting at a fixed speed or on demand.
 Application of product numbers for retention of specific
product settings.
 Simply convertible tooling (cassette system) for short
conversion times.
Technical specifications:
- Denesting range 1000 x 320 x 150 mm (L x W x H)
- Capacity to 270 packages per minute
- Machine dimensions 1100 x 1200 x 1800 mm (L x W x H)

1.8 EQUIPMENTS
The search for lightweight and more efficient solutions is seen also in pallets where plastic pallets are
chosen as they are lighter than traditional wood pallets. Furthermore HDPE pallets are recyclable and
better in terms of hygiene and security.
Efficiency is also a drive for pallet innovation. Just like with any other product, providing modular
solutions that can be easily stored when not in use is a trend.

1.8.1 Craemer: Flexible and cost effective alternative to wood pallets
Address
Craemer France
Tour Orion
12-14, rue de Vincennes
93100 Montreuil
France
Phone: +33 (0)1 55 86 10 65
www.craemer.com

Contact
Germinal Fonfria
Sales Director
Mobile: +33 (0)6 43 93 38 88
germinal.fonfria@craemer.com

At CFIA 2012, Craemer presented for the first time in France their latest plastic pallet called D1.
D1 is a lightweight 12kg HDPE pallet with high load-bearing capacity and long service life. The Craemer
D1 pallet has been especially developed for users of wood pallets in intralogistics who would
specifically like to save costs in pallet logistics and who are considering a switch to reusable

P a g e | 38
alternatives due to chipping, lack of hygiene, poor dimensional stability, lack of quality standards or
frequent downtimes and missing pallets.
The D1 pallet is also attractive for users of single-use pallets who often have to deal with damaged
goods after ocean transport.

The D1 is suitable for users that would like to be flexible and prepared for future logistic requirements
as the pallet can be retrofitted with other equipment features at any time - even after long periods of
use:
- up to 4 reinforcement profiles increase the load-bearing capacity to 1250kg max. in high rack
systems
- up to 14 anti-slip profiles for non-slip, safe applications
- RFID technology in the form of transponders for optimising intralogistics processes

→ Craemer’s latest patent details
Title: Plastic pallet with reinforced runner
Patent number: EP2216255
Abstract:
The plastic pallet (1) has a pallet provided with separate runners (6) made of rigid material, where the runners
have a single piece squirted hollow chamber profile with inner reinforcement ribs. The runners are connected
with pallet foot within the range of retaining bars in a form-fit and detachable manner. The runners have a rear
section in the range of retaining bars. The runners are made of glass-fiber reinforced plastic and polymer. The
pallet has retaining devices in cover range for reinforcing elements made of steel.


P a g e | 39

1.8.2 MDM: Wood Plastic composite foldable pallet surrounds
Address
mdm
21 avenue Graham Bell
Bussy St Georges
77607 Marnes la Vallée cedex 3
Phone: +33 (0)1 60 94 03 65
www.mdm.fr

Contact
Gilles Noury
Sales Manager
Gilles.noury@mdm.fr

MDM is a French company providing a wide range of equipments and accessories for industrial
applications. MDM’s solutions address storage, flow streamlining and shipping.
Their foldable pallet surround called “Plasti-Bois” allow to transform a pallet into a container when
needed and to save space when the container is not needed anymore. Plasti-Bois is made of wood
plastic composite material providing a moisture and oil resistant equipment that is splinter free and
recyclable.

MDM’s Plasti-Bois allows to save space as it folds down when unneeded

(Source: MDM)

1.8.3 D&B France: Stackable lightweight plastic pallets
Address
D&B France
ZI Route de Saumur
144, avenue Emile Zola
79102 Thouars Cedex
Phone: +33 (0)5 49 66 30 15
www.db-france.com

Contact
Philippe Chessé
Managing Director
Mobile: +33 (0)6 11 69 34 04
db.france@orange.fr

French company D&B sells a wide range of plastic containers and pallets. At CFIA 2012, the company
highlighted stackable lightweight HDPE pallets. Besides being lightweight theses pallets allow to save
space when not in use.


P a g e | 40


P a g e | 41

CONCLUSION
Although CFIA is not dedicated to packaging, this show nevertheless offers visitors many interesting
packaging solutions and equipments for the food industry.
Most companies exhibiting at this show are not focused on the food industry but provide solutions for
many different sectors. However, some companies are highly specialized and will not be seen in other
exhibitions.
Not surprinsingly, we saw at this year’s CFIA that exhibitors were much focused on offering more
efficient packages in terms both of weight or thickness and recycling. This has indeed been a major
trend for the past years.
Consumers are more and more aware about environmental issues. When buying a product they now
care not only about the content but also about the package. They are therefore looking for ecodesigned packages that show a concern for the environement and bio-based plastic, post-consumer
plastics, certified paper and biodegradable materials have become a must for some companies in
order to keep a competitive edge.
Beside this concern for our planet, food packaging is very much focused on convenience as people
spend less and less time cooking and buy more and more ready-made and on-the-go meals. Packages
have therefore had to evolve and containers, bags and pots have become a real marketing tool for
companies.
Many of the companies seen at CFIA 2012 told us that they will be at Emballage, Paris in November
with new products. So, we look forward to going to Embalage to discover their latest developments
together with those of many other companies that did not make it to Rennes.


P a g e | 42

A PROPOS DE VEILLE SALON
Lancé officiellement depuis le début de l’année 2010 par la société de veille et d’intelligence
économique VIEDOC Consulting, VeilleSalon.com est le premier service professionnel de veille salon
destiné aux entreprises et s’appuie sur un des plus importants annuaires mondiaux des salons,
colloques et autres événements internationaux.
Ce nouveau service professionnel est destiné aussi bien aux visiteurs / entreprises, aux exposants
qu’aux organisateurs de salons.
A travers un annuaire bilingue, c’est plus de 7500 salons et évènements internationaux portant sur la
plupart des secteurs industriels et tertiaires ainsi que les métiers de l’entreprise comme par exemple:
Aéronautique, Agriculture, Agroalimentaire, Automobile, Matériaux, Bâtiment, Biens de consommations,
Cosmétique, Electronique, Défense, Energie, Optique, Pharmaceutique, Télécommunications… pour les secteurs
industriels ;
Banque/assurance, Hôtellerie, Immobilier, Médias/publicités, Services à la personne, Tourisme… pour les
secteurs tertiaires ;
Chimie, Design/architecture, Distribution, Emballage, Enseignement/formation, Hygiène & environnement,
Informatique, Innovation, Maintenance, Mécanique, Qualité, Ressources humaines… pour les métiers

Outre des fonctionnalités puissantes de recherches multicritères (dates, lieux, mots-clés, secteurs,
organisateurs, exposants...), le site VeilleSalon.com propose également aux visiteurs de bénéficier d'un
agenda interactif et personnalisable des salons à venir, d’une newsletter mensuelle, d’un forum et
bien d'autres services encore.
Pour les futurs exposants et les organisateurs d’événements, le site VeilleSalon.com constitue un
véritable outil de communication : inscription des nouveaux événements, présentation de votre
société et de son actualité (innovations produits/process, nouveaux services), mise à disposition
gratuite ou payante des proceedings de conférence sur notre espace dédiée, informations des visiteurs
en temps réel… C’est également un lieu d’échange où les visiteurs peuvent prendre directement
contact avec vous pour préparer au mieux leur visite et obtenir des renseignements complémentaires
sur votre société.
Pourquoi proposer un service professionnel de veille salon ?
La veille salon est idéale pour l'identification et l’analyse de la concurrence, des fournisseurs, de
nouveaux produits, équipements, services, pour détecter des transferts technologiques et des
innovations, réaliser une prospection commerciale avec de nouveaux clients potentiels et optimiser sa
connaissance d'un marché et de ses évolutions.
C’est pourquoi l’équipe de VEILLESALON, au travers des ingénieurs consultants expérimentés et
aguerris aux techniques de veille de la société VIEDOC Consulting vous propose un ensemble de
prestations dans ce domaine : réalisation de veille salon en France comme à l’étranger,
accompagnement individuel sur les lieux d’événements, réalisation d’enquête et d’interviews à la
demande, formation de vos effectifs…
Ainsi, que vous soyez une entreprise soucieuse d’optimiser sa veille salon, un futur exposant ou un
organisateur d’événements, nous avons développé des solutions sur mesure susceptibles de répondre
à vos attentes.
Pour accéder à notre site : http://www.veillesalon.com.

P a g e | 43

PRÉSENTATION DE VIEDOC SARL
VIEDOC est une société au cœur de l’information. Elle constitue un véritable partenaire des entreprises
de la stratégie à l’opérationnel.
VIEDOC a pour vocation d’aider ses clients dans les phases amont de leurs activités (intelligence
économique, knowledge management, analyse de la concurrence, veille technologique, étude de
marché, veille brevets, benchmarking, transferts technologiques, état de l’art…) et couvre ainsi
l’ensemble des métiers liés à la recherche et à l’analyse d’informations utiles à l’entreprises
Ces métiers ne nécessitent pas impérativement des compétences permanentes dans l'entreprise.
Mais, ils imposent une présence pertinente au bon moment dans son cycle de vie. VIEDOC intervient
donc pour ses clients sur des durées longues et également plus courtes lorsqu'il s'agit de mettre en
œuvre son expérience pour aider à la décision.
VIEDOC conseille ainsi des entreprises de tous secteurs d'activité (automobile, aéronautique et
défense, agroalimentaire, cosmétique, santé, matériaux, optique, packaging, télécommunications...).
De part ses activités, VIEDOC peut donc aider toute entreprise ambitieuse et consciente de
l'importance d'investir à ce niveau :
de la PME ultra innovante avide de conseils stratégiques dans des jalons très serrés,
aux grands groupes industriels soucieux de garder leur position de leadership.
Méthodologie :
Notre démarche se veut pragmatique et construite sur une méthodologie rigoureuse reprenant
l'analyse des enjeux, la collecte, le traitement, l’analyse et la diffusion d’informations à forte valeur
ajoutée.
A travers une expérience multisectorielle, VIEDOC met à la disposition de ses clients sa capacité à
assurer des prestations parfaitement adaptées à leurs besoins en étant à la fois à l'écoute de leurs
préoccupations et disponible pour s'adapter à leurs contraintes et à leurs méthodes.
Pour accompagner ses clients avec succès dans les différentes étapes du cycle de vie de leur entreprise
(de la création à la reprise), de leurs produits (de la conception à la vente) ou de leurs projets (de la
première étude à l’achèvement du projet), VIEDOC intervient aussi bien sur l’innovation produit que
process et gère à la fois des informations techniques et économiques.
Spécialistes de la recherche et de l’analyse d’information à forte valeur ajoutée, nous mettons à
contribution notre expérience, nos méthodologies et notre capacité d’analyse pour vous fournir des
informations qualifiées et validées de haute qualité.
Experts dans l’identification des transferts technologiques, nous avons de cesse de cultiver notre vision
multisectorielle en apportant notre professionnalisme et notre savoir faire à de nombreux clients,
grands groupes industriels et PME/PMI, issus d’une dizaine de secteurs d’activités distincts.
C'est cette expérience qui permet, aujourd'hui, de mettre à la disposition de ses clients, une analyse
pertinente ne négligeant aucune des implications techniques, économiques, juridiques ou humaines
de leurs travaux et ce, dans le respect total des règles de déontologie qui guident l’ensemble des
activités de la société VIEDOC.

P a g e | 44

www.veillesalon.com

Un service proposé par :

VIEDOC SARL
2 rue Hélène Boucher
78280 Guyancourt (France)
Tél : +33 (0)1 30 45 43 27
Email : info@viedoc.biz
Site : www.viedoc.fr


CFIA 2012 Food Industry ingredients Competitive Intelligence Report

More Related Content

Viewers also liked

Similar to CFIA 2012 Food Industry ingredients Competitive Intelligence Report

More from Viedoc

Recently uploaded

CFIA 2012 Food Industry ingredients Competitive Intelligence Report