This document provides specifications for several types of machinery: a vertical turret milling machine, a tool grinding machine, a precision lathe machine, a center lathe machine, a reciprocating surface grinding machine, and a pillar drilling machine. For each machine, the specifications include information such as make and model, dimensions, speed, power requirement, weight, and other technical details.

1. SARATH CHANDRAN
RAHUL PRADEEP
PRATHIUSH
JISHNU KRISHNAN N V

2.  They are written documents or manuals that stipulate the method of production
capacity, power requirement, fabrication methods & other finer details of the
equipment that makes it apt for use.
 It is important to an engineer as knowing the right surgery tools is to a surgeon.
 An engineer must have a clear understanding of equipment specifications to avoid
equipment breakages.
WHAT IS EQUIPMENT SPECIFICATIONS ?
2

3.  Gives a better understanding of equipment design & operating principles.
 Helps order the right equipment.
 Enables to forecast power and processing demands.
 Facilitates selecting the right service conditions.
 Enables adherence to accurate specification standards.
3

4. VERTICAL TURRET MILLING MACHINE
4

5. Make: ESTEEM Type: 2S
Table Longitudinal Travel 762 mm
Work Table Size 229 x 1069 mm
Spindle Speed 80 – 2720 RPM
Main Drive Motor 3 HP
Head Tilt 450
Forward 450
Backward
Cross Travel 305 mm
Vertical Travel 407 mm
Machine Weight 950 Kgs
Maximum Workpiece Weight 300 Kgs
Overall Height 2160 mm
SPECIFICATIONS OF VERTICAL TURRET MILLING MACHINE
5

6. 6

7. Make: S.I.G.T (P) Ltd. Type: SG 4
Centre Height 150 mm
Capacity (Length x Width) 500 x 250 mm
Standard Grinding Wheel (Dia. x width) 200 x 20 mm
Wheel Balancing Stand 1
Maximum Height from Table to Grinding
Wheel
275 mm
Magnetic Chuck (Recommended) 500 x 200 mm
Electric Motor 1.5 KW, 3 Phase, 2 HP, 2800 RPM
Cross Feed Graduation 0.002 mm
Vertical Feed Graduation 0.05 mm
Net Weight 900 – 1000 Kgs
SPECIFICATIONS OF TOOL GRINDING MACHINE
7

8. 8

9. Make: NAGMATI Type: GNM 1 Series
Swing Over Bed 350 mm
Swing Over Cross Slide 215 mm
Centre Height 175 mm
Swing in Gap No Gap
Admit between Centre 650 mm
Bed Width 240 mm
Spindle Speed 1500 RPM
Motor HP 2 HP (1.5 KW)
Lead Screw Diameter 25.4 mm
Feed Longitudinal 0.15 -0.86 mm
Thread Metric Pitches 0.5 – 6 mm
Net weight 900 – 1100 Kgs
Tailstock Quill Diameter 50 mm
Tail quill Travel 140 mm
Thread Inches 4 – 22 TPI
SPECIFICATIONS OF PRECISION LATHE MACHINE
9

10. 10

11. Make: Mysore Kirloskar Ltd. Type: Turnmaster 35
Bed Length 1828.8 mm
Centre Height 150 mm
Spindle Bore 48 mm
Power 3 HP
Spindle Speed 1430 RPM
Machine Type Geared
Phase 3 Phase
SPECIFICATIONS OF CENTRE LATHE MACHINE
11

12. 12

13. SPECIFICATIONS OF RECIPROCATING SURFACE
GRINDING MACHINE
Make – Alex machine tool Type – NH 500
Grinding (L x W) 500 X 250 mm
Maximum Longitudinal Movement 550 mm
Maximum Cross Movement 280 mm
Grinding wheel( Dia. x Thickness x Bore) 220 x 20 x 50.8 mm
Grinding Wheel Speed 2850 RPM
Grinding Spindle Motor 2 HP
Machine Size( L x W x H) 1250 x 1450 x 1650 mm
Net Weight 1200 Kgs
13

14. 14

15. SPECIFICATIONS OF PILLAR DRILLING MACHINE
Make : SAMPAT Machine Tools Type : BDM/RC 13 MM
Hole Diameter 25 – 50 mm
Drill Depth 500 mm
No Load speed 0 – 2000 RPM
Machine Type Semi-automatic , Manual
Variable Speed Yes
Drilling Diameter 40 mm
15