Photoreforming of biomass to value-added chemicals and fuels is a chemical approach to extract photosynthetically-trapped energy in complex biomolecules which otherwise disintegrate naturally in the environment. Designing precise photocatalytic materials that can selectively break the sturdy, nature-designed biomass with multiplex chemical composition/bonding and inaccessible sites is central to deploying this technology. Polymeric carbon nitride (CN) comprised of a 2D network of condensed heptazine/triazine (C6N7/C3N3) core has shown great promise for photoreforming of biomass derivatives due to intriguing physicochemical and optical properties. This review comprehensively summarizes the state-of-the-art applications of CN-based photocatalysts for the conversion of lignocellulosic biomass derivatives. Various chemical and structural modifications in CN structure such as doping, surface functionalization, hybridization entailing to higher selectivity and conversion have been discussed aiming at providing valuable guidance for future CN-based materials design.
Water-splitting photoelectrodes consisting of heterojunctions of carbon nitri...Pawan Kumar
Quinary and senary non-stoichiometric double perovskites such as Ba2Ca0.66Nb1.34−xFexO6−δ (BCNF) have been utilized for gas sensing, solid oxide fuel cells and thermochemical CO2 reduction. Herein, we examined their potential as narrow bandgap semiconductors for use in solar energy harvesting. A cobalt co-doped BCNF, Ba2Ca0.66Nb0.68Fe0.33Co0.33O6−δ (BCNFCo), exhibited an optical absorption edge at ∼800 nm, p-type conduction and a distinct photoresponse up to 640 nm while demonstrating high thermochemical stability. A nanocomposite of BCNFCo and g-C3N4 (CN) was prepared via a facile solvent-assisted exfoliation/blending approach using dichlorobenzene and glycerol at a moderate temperature. The exfoliation of g-C3N4 followed by wrapping on perovskite established an effective heterojunction between the materials for charge separation. The conjugated 2D sheets of CN enabled better charge migration resulting in increased photoelectrochemical performance. A blend composed of 40 wt% perovskites and CN performed optimally, whilst achieving a photocurrent density as high as 1.5 mA cm−2 for sunlight-driven water-splitting with a Faradaic efficiency as high as ∼88%.
Polymeric carbon nitride-based photocatalysts for photoreforming of biomass d...Pawan Kumar
Photoreforming of biomass to value-added chemicals and fuels is a chemical approach to extract photosynthetically-trapped energy in complex biomolecules which otherwise disintegrate naturally in the environment. Designing precise photocatalytic materials that can selectively break the sturdy, nature-designed biomass with multiplex chemical composition/bonding and inaccessible sites is central to deploying this technology. Polymeric carbon nitride (CN) comprised of a 2D network of condensed heptazine/triazine (C6N7/C3N3) core has shown great promise for photoreforming of biomass derivatives due to intriguing physicochemical and optical properties. This review comprehensively summarizes the state-of-the-art applications of CN-based photocatalysts for the conversion of lignocellulosic biomass derivatives. Various chemical and structural modifications in CN structure such as doping, surface functionalization, hybridization entailing to higher selectivity and conversion have been discussed aiming at providing valuable guidance for future CN-based materials design.
Photocatalytic Mechanism Control and Study of Carrier Dynamics in CdS@C3N5 Co...Pawan Kumar
We present a potential solution to the problem of extraction of photogenerated holes from CdS nanocrystals and nanowires. The nanosheet form of C3N5 is a low-band-gap (Eg = 2.03 eV), azo-linked graphenic carbon nitride framework formed by the polymerization of melem hydrazine (MHP). C3N5 nanosheets were either wrapped around CdS nanorods (NRs) following the synthesis of pristine chalcogenide or intercalated among them by an in situ synthesis protocol to form two kinds of heterostructures, CdS-MHP and CdS-MHPINS, respectively. CdS-MHP improved the photocatalytic degradation rate of 4-nitrophenol by nearly an order of magnitude in comparison to bare CdS NRs. CdS-MHP also enhanced the sunlight-driven photocatalytic activity of bare CdS NWs for the decolorization of rhodamine B (RhB) by a remarkable 300% through the improved extraction and utilization of photogenerated holes due to surface passivation. More interestingly, CdS-MHP provided reaction pathway control over RhB degradation. In the absence of scavengers, CdS-MHP degraded RhB through the N-deethylation pathway. When either hole scavenger or electron scavenger was added to the RhB solution, the photocatalytic activity of CdS-MHP remained mostly unchanged, while the degradation mechanism shifted to the chromophore cleavage (cycloreversion) pathway. We investigated the optoelectronic properties of CdS-C3N5 heterojunctions using density functional theory (DFT) simulations, finite difference time domain (FDTD) simulations, time-resolved terahertz spectroscopy (TRTS), and photoconductivity measurements. TRTS indicated high carrier mobilities >450 cm2 V–1 s–1 and carrier relaxation times >60 ps for CdS-MHP, while CdS-MHPINS exhibited much lower mobilities <150 cm2 V–1 s–1 and short carrier relaxation times <20 ps. Hysteresis in the photoconductive J–V characteristics of CdS NWs disappeared in CdS-MHP, confirming surface passivation. Dispersion-corrected DFT simulations indicated a delocalized HOMO and a LUMO localized on C3N5 in CdS-MHP. C3N5, with its extended π-conjugation and low band gap, can function as a shuttle to extract carriers and excitons in nanostructured heterojunctions, and enhance performance in optoelectronic devices. Our results demonstrate how carrier dynamics in core–shell heterostructures can be manipulated to achieve control over the reaction mechanism in photocatalysis.
Synthesis and Characterization of Zinc Phthalocyanine-Cellulose Nanocrystal (...Pawan Kumar
We report highly fluorescent cellulose nanocrystals (CNCs) formed by conjugating a carboxylated zinc phthalocyanine (ZnPc) to two different types of CNCs. The conjugated nanocrystals (henceforth called ZnPc@CNCs) were bright green in color and exhibited absorption and emission maxima at ∼690 and ∼715 nm, respectively. The esterification protocol employed to covalently bind carboxylated ZnPc to surface hydroxyl group rich CNCs was expected to result in a monolayer of ZnPc on the surface of the CNCs. However, dynamic light scattering (DLS) studies indicated a large increase in the hydrodynamic radius of CNCs following conjugation to ZnPc, which suggests the binding of multiple ZnPc molecular layers on the CNC surface. This binding could be through co-facial π-stacking of ZnPc, where ZnPc metallophthalocyanine rings are horizontal to the CNC surface. The other possible binding mode would give rise to conjugated systems where ZnPc metallophthalocyanine rings are oriented vertically on the CNC surface. Density functional theory based calculations showed stable geometry following the conjugation protocol that involved covalently attached ester bond formation. The conjugates demonstrated superior performance for potential sensing applications through higher photoluminescence quenching capabilities compared to pristine ZnPc.
Sunlight-driven water-splitting using two dimensional carbon based semiconduc...Pawan Kumar
The overwhelming challenge of depleting fossil fuels and anthropogenic carbon emissions has driven research
into alternative clean sources of energy. To achieve the goal of a carbon neutral economy, the harvesting of
sunlight by using photocatalysts to split water into hydrogen and oxygen is an expedient approach to fulfill
the energy demand in a sustainable way along with reducing the emission of greenhouse gases. Even though
the past few decades have witnessed intensive research into inorganic semiconductor photocatalysts, their
quantum efficiencies for hydrogen production from visible photons remain too low for the large scale
deployment of this technology. Visible light absorption and efficient charge separation are two key necessary
conditions for achieving the scalable production of hydrogen from water. Two-dimensional carbon based
nanoscale materials such as graphene oxide, reduced graphene oxide, carbon nitride, modified 2D carbon
frameworks and their composites have emerged as potential photocatalysts due to their astonishing
properties such as superior charge transport, tunable energy levels and bandgaps, visible light absorption,
high surface area, easy processability, quantum confinement effects, and high photocatalytic quantum yields.
The feasibility of structural and chemical modification to optimize visible light absorption and charge
separation makes carbonaceous semiconductors promising candidates to convert solar energy into chemical
energy. In the present review, we have summarized the recent advances in 2D carbonaceous photocatalysts
with respect to physicochemical and photochemical tuning for solar light mediated hydrogen evolution
Heterostructured nanocomposite tin phthalocyanine@mesoporous ceria (SnPc@CeO2...Pawan Kumar
Heterostructured tin phthalocyanine supported to mesoporous ceria was synthesized and used a
photocatalyst for CO2 reduction under visible light. The photoreduction CO2 activities of the
heterostructures were investigated in the presence of triethylamine as sacrificial agent. The developed
photocatalyst exhibited high catalytic activity for photoreduction of CO2 and after 24 hours of visible
light irradiation 2342 mmol g1 cat of methanol (fMeOH ¼ 0.0223 or 2.23%) and 840 mmol g1 cat of CO
(fCO ¼ 0.0026 or 0.26%) were obtained as the major reaction products. The methanol formation rate
(RMeOH) and CO formation rate (RCO) was found to be 97.5 mmol h1 g1 cat and 35.0 mmol h1 g1 cat
respectively. While under the identical experimental conditions mesoporous ceria (meso-CeO2) gave
only 316 mmol g1 cat of methanol (fMeOH ¼ 0.003 or 0.30%) and 126 mmol g1 cat CO (fCO ¼ 0.0004
or 0.04%) with product formation rate RMeOH ¼ 13.2 mmol h1 g1 cat and RCO ¼ 5.3 mmol h1 g1 cat.
Furthermore, the recovered catalyst showed consistent catalytic activity for at least five runs without any
significant loss in product yields
Remarkable self-organization and unusual conductivity behavior in cellulose n...Pawan Kumar
Aqueous suspensions of cellulose nanocrystals were blended with Poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) [PEDOT:PSS], and cast into thin films. The morphology, structure and electrical properties of the resulting nanocomposite thin films were thoroughly characterized. We found that the CNC–PEDOT:PSS blends self-organize into a layered vertical stack with a pitch of 100–200 nm while retaining a continuous percolation network for PEDOT. Atomic force microscopy, dynamic light scattering and multi-angle light scattering measurements confirmed the wrapping of polymer chains around the rod-like CNCs. The blended films exhibited improved molecular ordering of the PEDOT chains with concomitant improvement in the carrier mobility. The remarkable self-organization and enhanced structural order enabled the CNC–PEDOT:PSS blends to exhibit a high conductivity typical of PEDOT:PSS even when the content of the insulating CNCs in the nanocomposite was as high as 50 wt%.
Water-splitting photoelectrodes consisting of heterojunctions of carbon nitri...Pawan Kumar
Quinary and senary non-stoichiometric double perovskites such as Ba2Ca0.66Nb1.34−xFexO6−δ (BCNF) have been utilized for gas sensing, solid oxide fuel cells and thermochemical CO2 reduction. Herein, we examined their potential as narrow bandgap semiconductors for use in solar energy harvesting. A cobalt co-doped BCNF, Ba2Ca0.66Nb0.68Fe0.33Co0.33O6−δ (BCNFCo), exhibited an optical absorption edge at ∼800 nm, p-type conduction and a distinct photoresponse up to 640 nm while demonstrating high thermochemical stability. A nanocomposite of BCNFCo and g-C3N4 (CN) was prepared via a facile solvent-assisted exfoliation/blending approach using dichlorobenzene and glycerol at a moderate temperature. The exfoliation of g-C3N4 followed by wrapping on perovskite established an effective heterojunction between the materials for charge separation. The conjugated 2D sheets of CN enabled better charge migration resulting in increased photoelectrochemical performance. A blend composed of 40 wt% perovskites and CN performed optimally, whilst achieving a photocurrent density as high as 1.5 mA cm−2 for sunlight-driven water-splitting with a Faradaic efficiency as high as ∼88%.
Polymeric carbon nitride-based photocatalysts for photoreforming of biomass d...Pawan Kumar
Photoreforming of biomass to value-added chemicals and fuels is a chemical approach to extract photosynthetically-trapped energy in complex biomolecules which otherwise disintegrate naturally in the environment. Designing precise photocatalytic materials that can selectively break the sturdy, nature-designed biomass with multiplex chemical composition/bonding and inaccessible sites is central to deploying this technology. Polymeric carbon nitride (CN) comprised of a 2D network of condensed heptazine/triazine (C6N7/C3N3) core has shown great promise for photoreforming of biomass derivatives due to intriguing physicochemical and optical properties. This review comprehensively summarizes the state-of-the-art applications of CN-based photocatalysts for the conversion of lignocellulosic biomass derivatives. Various chemical and structural modifications in CN structure such as doping, surface functionalization, hybridization entailing to higher selectivity and conversion have been discussed aiming at providing valuable guidance for future CN-based materials design.
Photocatalytic Mechanism Control and Study of Carrier Dynamics in CdS@C3N5 Co...Pawan Kumar
We present a potential solution to the problem of extraction of photogenerated holes from CdS nanocrystals and nanowires. The nanosheet form of C3N5 is a low-band-gap (Eg = 2.03 eV), azo-linked graphenic carbon nitride framework formed by the polymerization of melem hydrazine (MHP). C3N5 nanosheets were either wrapped around CdS nanorods (NRs) following the synthesis of pristine chalcogenide or intercalated among them by an in situ synthesis protocol to form two kinds of heterostructures, CdS-MHP and CdS-MHPINS, respectively. CdS-MHP improved the photocatalytic degradation rate of 4-nitrophenol by nearly an order of magnitude in comparison to bare CdS NRs. CdS-MHP also enhanced the sunlight-driven photocatalytic activity of bare CdS NWs for the decolorization of rhodamine B (RhB) by a remarkable 300% through the improved extraction and utilization of photogenerated holes due to surface passivation. More interestingly, CdS-MHP provided reaction pathway control over RhB degradation. In the absence of scavengers, CdS-MHP degraded RhB through the N-deethylation pathway. When either hole scavenger or electron scavenger was added to the RhB solution, the photocatalytic activity of CdS-MHP remained mostly unchanged, while the degradation mechanism shifted to the chromophore cleavage (cycloreversion) pathway. We investigated the optoelectronic properties of CdS-C3N5 heterojunctions using density functional theory (DFT) simulations, finite difference time domain (FDTD) simulations, time-resolved terahertz spectroscopy (TRTS), and photoconductivity measurements. TRTS indicated high carrier mobilities >450 cm2 V–1 s–1 and carrier relaxation times >60 ps for CdS-MHP, while CdS-MHPINS exhibited much lower mobilities <150 cm2 V–1 s–1 and short carrier relaxation times <20 ps. Hysteresis in the photoconductive J–V characteristics of CdS NWs disappeared in CdS-MHP, confirming surface passivation. Dispersion-corrected DFT simulations indicated a delocalized HOMO and a LUMO localized on C3N5 in CdS-MHP. C3N5, with its extended π-conjugation and low band gap, can function as a shuttle to extract carriers and excitons in nanostructured heterojunctions, and enhance performance in optoelectronic devices. Our results demonstrate how carrier dynamics in core–shell heterostructures can be manipulated to achieve control over the reaction mechanism in photocatalysis.
Synthesis and Characterization of Zinc Phthalocyanine-Cellulose Nanocrystal (...Pawan Kumar
We report highly fluorescent cellulose nanocrystals (CNCs) formed by conjugating a carboxylated zinc phthalocyanine (ZnPc) to two different types of CNCs. The conjugated nanocrystals (henceforth called ZnPc@CNCs) were bright green in color and exhibited absorption and emission maxima at ∼690 and ∼715 nm, respectively. The esterification protocol employed to covalently bind carboxylated ZnPc to surface hydroxyl group rich CNCs was expected to result in a monolayer of ZnPc on the surface of the CNCs. However, dynamic light scattering (DLS) studies indicated a large increase in the hydrodynamic radius of CNCs following conjugation to ZnPc, which suggests the binding of multiple ZnPc molecular layers on the CNC surface. This binding could be through co-facial π-stacking of ZnPc, where ZnPc metallophthalocyanine rings are horizontal to the CNC surface. The other possible binding mode would give rise to conjugated systems where ZnPc metallophthalocyanine rings are oriented vertically on the CNC surface. Density functional theory based calculations showed stable geometry following the conjugation protocol that involved covalently attached ester bond formation. The conjugates demonstrated superior performance for potential sensing applications through higher photoluminescence quenching capabilities compared to pristine ZnPc.
Sunlight-driven water-splitting using two dimensional carbon based semiconduc...Pawan Kumar
The overwhelming challenge of depleting fossil fuels and anthropogenic carbon emissions has driven research
into alternative clean sources of energy. To achieve the goal of a carbon neutral economy, the harvesting of
sunlight by using photocatalysts to split water into hydrogen and oxygen is an expedient approach to fulfill
the energy demand in a sustainable way along with reducing the emission of greenhouse gases. Even though
the past few decades have witnessed intensive research into inorganic semiconductor photocatalysts, their
quantum efficiencies for hydrogen production from visible photons remain too low for the large scale
deployment of this technology. Visible light absorption and efficient charge separation are two key necessary
conditions for achieving the scalable production of hydrogen from water. Two-dimensional carbon based
nanoscale materials such as graphene oxide, reduced graphene oxide, carbon nitride, modified 2D carbon
frameworks and their composites have emerged as potential photocatalysts due to their astonishing
properties such as superior charge transport, tunable energy levels and bandgaps, visible light absorption,
high surface area, easy processability, quantum confinement effects, and high photocatalytic quantum yields.
The feasibility of structural and chemical modification to optimize visible light absorption and charge
separation makes carbonaceous semiconductors promising candidates to convert solar energy into chemical
energy. In the present review, we have summarized the recent advances in 2D carbonaceous photocatalysts
with respect to physicochemical and photochemical tuning for solar light mediated hydrogen evolution
Heterostructured nanocomposite tin phthalocyanine@mesoporous ceria (SnPc@CeO2...Pawan Kumar
Heterostructured tin phthalocyanine supported to mesoporous ceria was synthesized and used a
photocatalyst for CO2 reduction under visible light. The photoreduction CO2 activities of the
heterostructures were investigated in the presence of triethylamine as sacrificial agent. The developed
photocatalyst exhibited high catalytic activity for photoreduction of CO2 and after 24 hours of visible
light irradiation 2342 mmol g1 cat of methanol (fMeOH ¼ 0.0223 or 2.23%) and 840 mmol g1 cat of CO
(fCO ¼ 0.0026 or 0.26%) were obtained as the major reaction products. The methanol formation rate
(RMeOH) and CO formation rate (RCO) was found to be 97.5 mmol h1 g1 cat and 35.0 mmol h1 g1 cat
respectively. While under the identical experimental conditions mesoporous ceria (meso-CeO2) gave
only 316 mmol g1 cat of methanol (fMeOH ¼ 0.003 or 0.30%) and 126 mmol g1 cat CO (fCO ¼ 0.0004
or 0.04%) with product formation rate RMeOH ¼ 13.2 mmol h1 g1 cat and RCO ¼ 5.3 mmol h1 g1 cat.
Furthermore, the recovered catalyst showed consistent catalytic activity for at least five runs without any
significant loss in product yields
Remarkable self-organization and unusual conductivity behavior in cellulose n...Pawan Kumar
Aqueous suspensions of cellulose nanocrystals were blended with Poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) [PEDOT:PSS], and cast into thin films. The morphology, structure and electrical properties of the resulting nanocomposite thin films were thoroughly characterized. We found that the CNC–PEDOT:PSS blends self-organize into a layered vertical stack with a pitch of 100–200 nm while retaining a continuous percolation network for PEDOT. Atomic force microscopy, dynamic light scattering and multi-angle light scattering measurements confirmed the wrapping of polymer chains around the rod-like CNCs. The blended films exhibited improved molecular ordering of the PEDOT chains with concomitant improvement in the carrier mobility. The remarkable self-organization and enhanced structural order enabled the CNC–PEDOT:PSS blends to exhibit a high conductivity typical of PEDOT:PSS even when the content of the insulating CNCs in the nanocomposite was as high as 50 wt%.
Boosting Photocatalytic Activity Using Carbon Nitride Based 2D/2D van der Waa...Pawan Kumar
The surging demand for energy and staggering pollutants in the environment have geared the scientific community to explore sustainable pathways that are economically feasible and environmentally compelling. In this context, harnessing solar energy using semiconductor materials to generate charge pairs to drive photoredox reactions has been envisioned as a futuristic approach. Numerous inorganic crystals with promising nanoregime properties investigated in the past decade have yet to demonstrate practical application due to limited photon absorption and sluggish charge separation kinetics. Two-dimensional semiconductors with tunable optical and electronic properties and quasi-resistance-free lateral charge transfer mechanisms have shown great promise in photocatalysis. Polymeric graphitic carbon nitride (g-C3N4) is among the most promising candidates due to fine-tuned band edges and the feasibility of optimizing the optical properties via materials genomics. Constructing a two-dimensional (2D)/2D van der Waals (vdW) heterojunction by allies of 2D carbon nitride sheets and other 2D semiconductors has demonstrated enhanced charge separation with improved visible photon absorption, and the performance is not restricted by the lattice matching of constituting materials. With the advent of new 2D semiconductors over the recent past, the 2D/2D heterojunction assemblies are gaining momentum to design high performance photocatalysts for numerous applications. This review aims to highlight recent advancements and key understanding in carbon nitride based 2D/2D heterojunctions and their applications in photocatalysis, including small molecules activation, conversion, and degradations. We conclude with a forward-looking perspective discussing the key challenges and opportunity areas for future research.
Photo-assisted oxidation of thiols to disulfides using cobalt ‘‘Nanorust’’ un...Pawan Kumar
Heterogeneous ‘‘Nanorust’’ containing cobalt oxide has been developed for the visible light assisted
oxidation of thiols to disulfides using molecular oxygen as an oxidant under alkaline free conditions and
therefore more environmentally friendly. Pyrolysis of heterogenized tetrasulfonated cobalt(II) phthalocyanine
(CoPcS) supported on mesoporous ceria (CeO2) transforms it into a novel heterogeneous ‘‘Nanorust’’
containing CoOx-C,N@CeO2 which exhibited higher catalytic activity than the homogeneous CoPcS as well
as the ceria immobilized CoPcS catalyst. Importantly, these catalysts could easily be recovered and recycled
for several runs, which makes the process greener and cost-effective.
Effect of morphology on the photoelectrochemical performance of nanostructure...Pawan Kumar
Cu2O is a promising earth-abundant semiconductor photocathode for sunlight-driven water splitting. Characterization results are presented to show how the photocurrent density (Jph), onset potential (Eonset), band edges, carrier density (NA), and interfacial charge transfer resistance (Rct) are affected by the morphology and method used to deposit Cu2O on a copper foil. Mesoscopic and planar morphologies exhibit large differences in the values of NA and Rct. However, these differences are not observed to translate to other photocatalytic properties of Cu2O. Mesoscopic and planar morphologies exhibit similar bandgap (e.g.) and flat band potential (Efb) values of 1.93 ± 0.04 eV and 0.48 ± 0.06 eV respectively. Eonset of 0.48 ± 0.04 eV obtained for these systems is close to the Efb indicating negligible water reduction overpotential. Electrochemically deposited planar Cu2O provides the highest photocurrent density of 5.0 mA cm−2 at 0 V vs reversible hydrogen electrode (RHE) of all the morphologies studied. The photocurrent densities observed in this study are among the highest reported values for bare Cu2O photocathodes.
Single-atom catalysts for biomass-derived drop-in chemicalsPawan Kumar
Conversion of biomass to fuel and drop-in chemicals is envisaged to solve the problem of depleting fossil fuel reserves while leveling-off the staggering CO2 concentration. By-passing the natural carbon cycle via the transformation of abundant lignocellulosic biomass into chemicals does not add any extra CO2 to the environment and the net CO2 concentration remains the same. The paradigm shifts from fossil fuel-based chemicals to biomass-derived products will rely on efficient and cost-effective catalysts that can compete with cheap and readily available fossil fuels. Existing transition and noble metal-based nanoparticle catalysts either in the supported or unsupported form are crippling due to poor activity/selectivity, deactivation of catalytically active sites, and the complex composition, recalcitrant nature, and high moisture content of biomass. Single-atom catalysts (SACs) possessing single-atom centers decorated on support have shown great promise in biomass conversion due to their unique geometric configuration, electronic properties, and ensemble effect. In contrast to traditional catalytic systems, SACs encompass the advantages of both heterogeneous and homogeneous catalysts with improved performance and easy recyclability. Because of the availability of each metal center for the reaction and unique geometrical configuration, SACs have displayed exceptional catalytic activity and selectivity (~95% in most cases). In addition, the SACs show increased thermal and chemical stability due to the stabilization of the metal center on the support. The present chapter highlights the various aspects of SACs for efficient and selective biomass conversion into drop-in chemicals.
Nanostructured composite materials for CO2 activationPawan Kumar
The increasing energy crisis and the worsening global climate caused by the excessive
utilization of the fossil fuel have boosted tremendous research about CO2 capture, storage and
utilization. Among these approaches, utilization of carbon dioxide to produce valuable chemicals
is preferred than dumping it. Particularly, utilization of CO2 as feedstock for the photocatalytic
conversion into valuable products is a viable approach for harvesting solar radiation as an energy
source and to mitigate increasing CO2 concentration. Artificial photosynthesis by using
nanostructured materials as photocatalyst has immense potential to convert carbon dioxide into
renewable fuels such as methanol/CO etc. The present chapter focuses on the synthesis, characterization and application of various nanostructured materials for CO2 activation including
photoreduction of CO2 to valuable products.
Flexible and Ultrasoft Inorganic 1D Semiconductor and Heterostructure Systems...Pawan Kumar
Low dimensionality and high flexibility are key demands for flexible electronic semiconductor devices. SnIP, the first atomic-scale double helical semiconductor combines structural anisotropy and robustness with exceptional electronic properties. The benefit of the double helix, combined with a diverse structure on the nanoscale, ranging from strong covalent bonding to weak van der Waals interactions, and the large structure and property anisotropy offer substantial potential for applications in energy conversion and water splitting. It represents the next logical step in downscaling the inorganic semiconductors from classical 3D systems, via 2D semiconductors like MXenes or transition metal dichalcogenides, to the first downsizeable, polymer-like atomic-scale 1D semiconductor SnIP. SnIP shows intriguing mechanical properties featuring a bulk modulus three times lower than any IV, III-V, or II-VI semiconductor. In situ bending tests substantiate that pure SnIP fibers can be bent without an effect on their bonding properties. Organic and inorganic hybrids are prepared illustrating that SnIP is a candidate to fabricate flexible 1D composites for energy conversion and water splitting applications. SnIP@C3N4 hybrid forms an unusual soft material core–shell topology with graphenic carbon nitride wrapping around SnIP. A 1D van der Waals heterostructure is formed capable of performing effective water splitting.
TiO2-HfN Radial Nano-Heterojunction: A Hot Carrier Photoanode for Sunlight-Dr...Pawan Kumar
The lack of active, stable, earth-abundant, and visible-light absorbing materials to replace
plasmonic noble metals is a critical obstacle for researchers in developing highly efficient and costeffective photocatalytic systems. Herein, a core–shell nanotube catalyst was fabricated consisting of
atomic layer deposited HfN shell and anodic TiO2 support layer with full-visible regime photoactivity
for photoelectrochemical water splitting. The HfN active layer has two unique characteristics: (1) a
large bandgap between optical and acoustic phonon modes (2) and no electronic bandgap, which
allows a large population of long life-time hot carriers, which are used to enhance the photoelectrochemical performance. The photocurrent density (≈2.5 mA·cm−2 at 1 V vs. Ag/AgCl) obtained in
this study under AM 1.5G 1 Sun illumination is unprecedented, as it is superior to most existing
plasmonic noble metal-decorated catalysts and surprisingly indicates a photocurrent response that
extends to 730 nm. The result demonstrates the far-reaching application potential of replacing active
HER/HOR noble metals such as Au, Ag, Pt, Pd, etc. with low-cost plasmonic ceramics.
Vapor Deposition of Semiconducting Phosphorus Allotropes into TiO2 Nanotube A...Pawan Kumar
Recent evidence of exponential environmental degradation will demand a drastic shift in research and development toward exploiting alternative energy resources such as solar energy. Here, we report the successful low-cost and easily accessible synthesis of hybrid semiconductor@TiO2 nanotube photocatalysts. In order to realize its maximum potential in harvesting photons in the visible-light range, TiO2 nanotubes have been loaded with earth-abundant, low-band-gap fibrous red and black phosphorus (P). Scanning electron microscopy– and scanning transmission electron microscopy–energy-dispersive X-ray spectroscopy, X-ray diffraction, Raman spectroscopy, X-ray photoelectron microscopy, and UV–vis measurements have been performed, substantiating the deposition of fibrous red and black P on top and inside the cavities of 100-μm-long electrochemically fabricated nanotubes. The nanotubular …
Photocatalytic Mechanism Control and Study of Carrier Dynamics in CdS@C3N5 Co...Pawan Kumar
We present a potential solution to the problem of extraction of photogenerated holes from CdS nanocrystals and nanowires. The nanosheet form of C3N5 is a low-band-gap (Eg = 2.03 eV), azo-linked graphenic carbon nitride framework formed by the polymerization of melem hydrazine (MHP). C3N5 nanosheets were either wrapped around CdS nanorods (NRs) following the synthesis of pristine chalcogenide or intercalated among them by an in situ synthesis protocol to form two kinds of heterostructures, CdS-MHP and CdS-MHPINS, respectively. CdS-MHP improved the photocatalytic degradation rate of 4-nitrophenol by nearly an order of magnitude in comparison to bare CdS NRs. CdS-MHP also enhanced the sunlight-driven photocatalytic activity of bare CdS NWs for the decolorization of rhodamine B (RhB) by a remarkable 300% through the improved extraction and utilization of photogenerated holes due to surface passivation. More interestingly, CdS-MHP provided reaction pathway control over RhB degradation. In the absence of scavengers, CdS-MHP degraded RhB through the N-deethylation pathway. When either hole scavenger or electron scavenger was added to the RhB solution, the photocatalytic activity of CdS-MHP remained mostly unchanged, while the degradation mechanism shifted to the chromophore cleavage (cycloreversion) pathway. We investigated the optoelectronic properties of CdS-C3N5 heterojunctions using density functional theory (DFT) simulations, finite difference time domain (FDTD) simulations, time-resolved terahertz spectroscopy (TRTS), and photoconductivity measurements. TRTS indicated high carrier mobilities >450 cm2 V–1 s–1 and carrier relaxation times >60 ps for CdS-MHP, while CdS-MHPINS exhibited much lower mobilities <150 cm2 V–1 s–1 and short carrier relaxation times <20 ps. Hysteresis in the photoconductive J–V characteristics of CdS NWs disappeared in CdS-MHP, confirming surface passivation. Dispersion-corrected DFT simulations indicated a delocalized HOMO and a LUMO localized on C3N5 in CdS-MHP. C3N5, with its extended π-conjugation and low band gap, can function as a shuttle to extract carriers and excitons in nanostructured heterojunctions, and enhance performance in optoelectronic devices. Our results demonstrate how carrier dynamics in core–shell heterostructures can be manipulated to achieve control over the reaction mechanism in photocatalysis.
Synthesis of flower-like magnetite nanoassembly: Application in the efficient...Pawan Kumar
A facile approach for the synthesis of magnetite microspheres with flower-like morphology is reported
that proceeds via the reduction of iron(III) oxide under a hydrogen atmosphere. The ensuing magnetic
catalyst is well characterized by XRD, FE-SEM, TEM, N2 adsorption-desorption isotherm, and
Mössbauer spectroscopy and explored for a simple yet efficient transfer hydrogenation reduction of a
variety of nitroarenes to respective anilines in good to excellent yields (up to 98%) employing hydrazine
hydrate. The catalyst could be easily separated at the end of a reaction using an external magnet and
can be recycled up to 10 times without any loss in catalytic activity.
Vapor Deposition of Semiconducting Phosphorus Allotropes into TiO2 Nanotube A...Pawan Kumar
Recent evidence of exponential environmental degradation will demand a drastic shift in research and development toward
exploiting alternative energy resources such as solar energy. Here, we
report the successful low-cost and easily accessible synthesis of hybrid
semiconductor@TiO2 nanotube photocatalysts. In order to realize its
maximum potential in harvesting photons in the visible-light range, TiO2
nanotubes have been loaded with earth-abundant, low-band-gap fibrous
red and black phosphorus (P). Scanning electron microscopy− and
scanning transmission electron microscopy−energy-dispersive X-ray
spectroscopy, X-ray diffraction, Raman spectroscopy, X-ray photoelectron microscopy, and UV−vis measurements have been performed,
substantiating the deposition of fibrous red and black P on top and
inside the cavities of 100-μm-long electrochemically fabricated nanotubes. The nanotubular morphology of titania and a vapor-transport technique are utilized to form heterojunctions of P and
TiO2. Compared to pristine anatase 3.2 eV TiO2 nanotubes, the creation of heterojunctions in the hybrid material resulted in
1.5−2.1 eV photoelectrocatalysts. An enhanced photoelectrochemical water-splitting performance under visible light compared
with the individual components resulted for the P@TiO2 hybrids. This feature is due to synergistically improved charge
separation in the heterojunction and more effective visible-light absorption. The electronic band structure and charge-carrier
dynamics are investigated in detail using ultraviolet photoelectron spectroscopy and Kelvin probe force microscopy to elucidate
the charge-separation mechanism. A Fermi-level alignment in P@TiO2 heterojunctions leads to a more reductive flat-band
potential and a deeper valence band compared to pristine P and thus facilitates a better water-splitting performance. Our results
demonstrate effective conversion efficiencies for the nanostructured hybrids, which may enable future applications in
optoelectronic applications such as photodetectors, photovoltaics, photoelectrochemical catalysts, and sensors.
Visible light assisted reduction of nitrobenzenes using Fe(bpy)3+2/rGOnanocom...Pawan Kumar
Visible-light-induced photocatalytic reduction of aromatic nitrobenzenes to the corresponding anilinesat room temperature using reduced graphene oxide (rGO) immobilized iron(II) bipyridine complex asphotocatalyst is described. The rGO-immobilized iron catalyst exhibited superior catalytic activity thanhomogeneous iron(II) bipyridine complex and much higher than metal free rGO photocatalysts. Theheterogeneous photocatalyst was found to be robust and could easily be recovered and reused for severalruns without any significant loss in photocatalytic activity.
A ruthenium trinuclear polyazine complex was synthesized and subsequently immobilized through
complexation to a graphene oxide support containing phenanthroline ligands (GO-phen). The developed
photocatalyst was used for the photocatalytic reduction of CO2 to methanol, using a 20 watt white cold
LED flood light, in a dimethyl formamide–water mixture containing triethylamine as a reductive
quencher. After 48 h illumination, the yield of methanol was found to be 3977.57 5.60 mmol gcat
1.
The developed photocatalyst exhibited a higher photocatalytic activity than graphene oxide, which
provided a yield of 2201.40 8.76 mmol gcat
1. After the reaction, the catalyst was easily recovered and
reused for four subsequent runs without a significant loss of catalytic activity and no leaching of the
metal/ligand was detected during the reaction.
Sunlight-driven water-splitting using two-dimensional carbon based semiconduc...Pawan Kumar
The overwhelming challenge of depleting fossil fuels and anthropogenic carbon emissions has driven research into alternative clean sources of energy. To achieve the goal of a carbon neutral economy, the harvesting of sunlight by using photocatalysts to split water into hydrogen and oxygen is an expedient approach to fulfill the energy demand in a sustainable way along with reducing the emission of greenhouse gases. Even though the past few decades have witnessed intensive research into inorganic semiconductor photocatalysts, their quantum efficiencies for hydrogen production from visible photons remain too low for the large scale deployment of this technology. Visible light absorption and efficient charge separation are two key necessary conditions for achieving the scalable production of hydrogen from water. Two-dimensional carbon based nanoscale materials such as graphene oxide, reduced …
Sunlight-driven water-splitting using twodimensional carbon based semiconductorsPawan Kumar
The overwhelming challenge of depleting fossil fuels and anthropogenic carbon emissions has driven research
into alternative clean sources of energy. To achieve the goal of a carbon neutral economy, the harvesting of
sunlight by using photocatalysts to split water into hydrogen and oxygen is an expedient approach to fulfill
the energy demand in a sustainable way along with reducing the emission of greenhouse gases. Even though
the past few decades have witnessed intensive research into inorganic semiconductor photocatalysts, their
quantum efficiencies for hydrogen production from visible photons remain too low for the large scale
deployment of this technology. Visible light absorption and efficient charge separation are two key necessary
conditions for achieving the scalable production of hydrogen from water. Two-dimensional carbon based
nanoscale materials such as graphene oxide, reduced graphene oxide, carbon nitride, modified 2D carbon
frameworks and their composites have emerged as potential photocatalysts due to their astonishing
properties such as superior charge transport, tunable energy levels and bandgaps, visible light absorption,
high surface area, easy processability, quantum confinement effects, and high photocatalytic quantum yields.
The feasibility of structural and chemical modification to optimize visible light absorption and charge
separation makes carbonaceous semiconductors promising candidates to convert solar energy into chemical
energy. In the present review, we have summarized the recent advances in 2D carbonaceous photocatalysts
with respect to physicochemical and photochemical tuning for solar light mediated hydrogen evolution.
Boosting Photocatalytic Activity Using Carbon Nitride Based 2D/2D van der Waa...Pawan Kumar
The surging demand for energy and staggering pollutants in the environment have geared the scientific community to explore sustainable pathways that are economically feasible and environmentally compelling. In this context, harnessing solar energy using semiconductor materials to generate charge pairs to drive photoredox reactions has been envisioned as a futuristic approach. Numerous inorganic crystals with promising nanoregime properties investigated in the past decade have yet to demonstrate practical application due to limited photon absorption and sluggish charge separation kinetics. Two-dimensional semiconductors with tunable optical and electronic properties and quasi-resistance-free lateral charge transfer mechanisms have shown great promise in photocatalysis. Polymeric graphitic carbon nitride (g-C3N4) is among the most promising candidates due to fine-tuned band edges and the feasibility of optimizing the optical properties via materials genomics. Constructing a two-dimensional (2D)/2D van der Waals (vdW) heterojunction by allies of 2D carbon nitride sheets and other 2D semiconductors has demonstrated enhanced charge separation with improved visible photon absorption, and the performance is not restricted by the lattice matching of constituting materials. With the advent of new 2D semiconductors over the recent past, the 2D/2D heterojunction assemblies are gaining momentum to design high performance photocatalysts for numerous applications. This review aims to highlight recent advancements and key understanding in carbon nitride based 2D/2D heterojunctions and their applications in photocatalysis, including small molecules activation, conversion, and degradations. We conclude with a forward-looking perspective discussing the key challenges and opportunity areas for future research.
Photo-assisted oxidation of thiols to disulfides using cobalt ‘‘Nanorust’’ un...Pawan Kumar
Heterogeneous ‘‘Nanorust’’ containing cobalt oxide has been developed for the visible light assisted
oxidation of thiols to disulfides using molecular oxygen as an oxidant under alkaline free conditions and
therefore more environmentally friendly. Pyrolysis of heterogenized tetrasulfonated cobalt(II) phthalocyanine
(CoPcS) supported on mesoporous ceria (CeO2) transforms it into a novel heterogeneous ‘‘Nanorust’’
containing CoOx-C,N@CeO2 which exhibited higher catalytic activity than the homogeneous CoPcS as well
as the ceria immobilized CoPcS catalyst. Importantly, these catalysts could easily be recovered and recycled
for several runs, which makes the process greener and cost-effective.
Effect of morphology on the photoelectrochemical performance of nanostructure...Pawan Kumar
Cu2O is a promising earth-abundant semiconductor photocathode for sunlight-driven water splitting. Characterization results are presented to show how the photocurrent density (Jph), onset potential (Eonset), band edges, carrier density (NA), and interfacial charge transfer resistance (Rct) are affected by the morphology and method used to deposit Cu2O on a copper foil. Mesoscopic and planar morphologies exhibit large differences in the values of NA and Rct. However, these differences are not observed to translate to other photocatalytic properties of Cu2O. Mesoscopic and planar morphologies exhibit similar bandgap (e.g.) and flat band potential (Efb) values of 1.93 ± 0.04 eV and 0.48 ± 0.06 eV respectively. Eonset of 0.48 ± 0.04 eV obtained for these systems is close to the Efb indicating negligible water reduction overpotential. Electrochemically deposited planar Cu2O provides the highest photocurrent density of 5.0 mA cm−2 at 0 V vs reversible hydrogen electrode (RHE) of all the morphologies studied. The photocurrent densities observed in this study are among the highest reported values for bare Cu2O photocathodes.
Single-atom catalysts for biomass-derived drop-in chemicalsPawan Kumar
Conversion of biomass to fuel and drop-in chemicals is envisaged to solve the problem of depleting fossil fuel reserves while leveling-off the staggering CO2 concentration. By-passing the natural carbon cycle via the transformation of abundant lignocellulosic biomass into chemicals does not add any extra CO2 to the environment and the net CO2 concentration remains the same. The paradigm shifts from fossil fuel-based chemicals to biomass-derived products will rely on efficient and cost-effective catalysts that can compete with cheap and readily available fossil fuels. Existing transition and noble metal-based nanoparticle catalysts either in the supported or unsupported form are crippling due to poor activity/selectivity, deactivation of catalytically active sites, and the complex composition, recalcitrant nature, and high moisture content of biomass. Single-atom catalysts (SACs) possessing single-atom centers decorated on support have shown great promise in biomass conversion due to their unique geometric configuration, electronic properties, and ensemble effect. In contrast to traditional catalytic systems, SACs encompass the advantages of both heterogeneous and homogeneous catalysts with improved performance and easy recyclability. Because of the availability of each metal center for the reaction and unique geometrical configuration, SACs have displayed exceptional catalytic activity and selectivity (~95% in most cases). In addition, the SACs show increased thermal and chemical stability due to the stabilization of the metal center on the support. The present chapter highlights the various aspects of SACs for efficient and selective biomass conversion into drop-in chemicals.
Nanostructured composite materials for CO2 activationPawan Kumar
The increasing energy crisis and the worsening global climate caused by the excessive
utilization of the fossil fuel have boosted tremendous research about CO2 capture, storage and
utilization. Among these approaches, utilization of carbon dioxide to produce valuable chemicals
is preferred than dumping it. Particularly, utilization of CO2 as feedstock for the photocatalytic
conversion into valuable products is a viable approach for harvesting solar radiation as an energy
source and to mitigate increasing CO2 concentration. Artificial photosynthesis by using
nanostructured materials as photocatalyst has immense potential to convert carbon dioxide into
renewable fuels such as methanol/CO etc. The present chapter focuses on the synthesis, characterization and application of various nanostructured materials for CO2 activation including
photoreduction of CO2 to valuable products.
Flexible and Ultrasoft Inorganic 1D Semiconductor and Heterostructure Systems...Pawan Kumar
Low dimensionality and high flexibility are key demands for flexible electronic semiconductor devices. SnIP, the first atomic-scale double helical semiconductor combines structural anisotropy and robustness with exceptional electronic properties. The benefit of the double helix, combined with a diverse structure on the nanoscale, ranging from strong covalent bonding to weak van der Waals interactions, and the large structure and property anisotropy offer substantial potential for applications in energy conversion and water splitting. It represents the next logical step in downscaling the inorganic semiconductors from classical 3D systems, via 2D semiconductors like MXenes or transition metal dichalcogenides, to the first downsizeable, polymer-like atomic-scale 1D semiconductor SnIP. SnIP shows intriguing mechanical properties featuring a bulk modulus three times lower than any IV, III-V, or II-VI semiconductor. In situ bending tests substantiate that pure SnIP fibers can be bent without an effect on their bonding properties. Organic and inorganic hybrids are prepared illustrating that SnIP is a candidate to fabricate flexible 1D composites for energy conversion and water splitting applications. SnIP@C3N4 hybrid forms an unusual soft material core–shell topology with graphenic carbon nitride wrapping around SnIP. A 1D van der Waals heterostructure is formed capable of performing effective water splitting.
TiO2-HfN Radial Nano-Heterojunction: A Hot Carrier Photoanode for Sunlight-Dr...Pawan Kumar
The lack of active, stable, earth-abundant, and visible-light absorbing materials to replace
plasmonic noble metals is a critical obstacle for researchers in developing highly efficient and costeffective photocatalytic systems. Herein, a core–shell nanotube catalyst was fabricated consisting of
atomic layer deposited HfN shell and anodic TiO2 support layer with full-visible regime photoactivity
for photoelectrochemical water splitting. The HfN active layer has two unique characteristics: (1) a
large bandgap between optical and acoustic phonon modes (2) and no electronic bandgap, which
allows a large population of long life-time hot carriers, which are used to enhance the photoelectrochemical performance. The photocurrent density (≈2.5 mA·cm−2 at 1 V vs. Ag/AgCl) obtained in
this study under AM 1.5G 1 Sun illumination is unprecedented, as it is superior to most existing
plasmonic noble metal-decorated catalysts and surprisingly indicates a photocurrent response that
extends to 730 nm. The result demonstrates the far-reaching application potential of replacing active
HER/HOR noble metals such as Au, Ag, Pt, Pd, etc. with low-cost plasmonic ceramics.
Vapor Deposition of Semiconducting Phosphorus Allotropes into TiO2 Nanotube A...Pawan Kumar
Recent evidence of exponential environmental degradation will demand a drastic shift in research and development toward exploiting alternative energy resources such as solar energy. Here, we report the successful low-cost and easily accessible synthesis of hybrid semiconductor@TiO2 nanotube photocatalysts. In order to realize its maximum potential in harvesting photons in the visible-light range, TiO2 nanotubes have been loaded with earth-abundant, low-band-gap fibrous red and black phosphorus (P). Scanning electron microscopy– and scanning transmission electron microscopy–energy-dispersive X-ray spectroscopy, X-ray diffraction, Raman spectroscopy, X-ray photoelectron microscopy, and UV–vis measurements have been performed, substantiating the deposition of fibrous red and black P on top and inside the cavities of 100-μm-long electrochemically fabricated nanotubes. The nanotubular …
Photocatalytic Mechanism Control and Study of Carrier Dynamics in CdS@C3N5 Co...Pawan Kumar
We present a potential solution to the problem of extraction of photogenerated holes from CdS nanocrystals and nanowires. The nanosheet form of C3N5 is a low-band-gap (Eg = 2.03 eV), azo-linked graphenic carbon nitride framework formed by the polymerization of melem hydrazine (MHP). C3N5 nanosheets were either wrapped around CdS nanorods (NRs) following the synthesis of pristine chalcogenide or intercalated among them by an in situ synthesis protocol to form two kinds of heterostructures, CdS-MHP and CdS-MHPINS, respectively. CdS-MHP improved the photocatalytic degradation rate of 4-nitrophenol by nearly an order of magnitude in comparison to bare CdS NRs. CdS-MHP also enhanced the sunlight-driven photocatalytic activity of bare CdS NWs for the decolorization of rhodamine B (RhB) by a remarkable 300% through the improved extraction and utilization of photogenerated holes due to surface passivation. More interestingly, CdS-MHP provided reaction pathway control over RhB degradation. In the absence of scavengers, CdS-MHP degraded RhB through the N-deethylation pathway. When either hole scavenger or electron scavenger was added to the RhB solution, the photocatalytic activity of CdS-MHP remained mostly unchanged, while the degradation mechanism shifted to the chromophore cleavage (cycloreversion) pathway. We investigated the optoelectronic properties of CdS-C3N5 heterojunctions using density functional theory (DFT) simulations, finite difference time domain (FDTD) simulations, time-resolved terahertz spectroscopy (TRTS), and photoconductivity measurements. TRTS indicated high carrier mobilities >450 cm2 V–1 s–1 and carrier relaxation times >60 ps for CdS-MHP, while CdS-MHPINS exhibited much lower mobilities <150 cm2 V–1 s–1 and short carrier relaxation times <20 ps. Hysteresis in the photoconductive J–V characteristics of CdS NWs disappeared in CdS-MHP, confirming surface passivation. Dispersion-corrected DFT simulations indicated a delocalized HOMO and a LUMO localized on C3N5 in CdS-MHP. C3N5, with its extended π-conjugation and low band gap, can function as a shuttle to extract carriers and excitons in nanostructured heterojunctions, and enhance performance in optoelectronic devices. Our results demonstrate how carrier dynamics in core–shell heterostructures can be manipulated to achieve control over the reaction mechanism in photocatalysis.
Synthesis of flower-like magnetite nanoassembly: Application in the efficient...Pawan Kumar
A facile approach for the synthesis of magnetite microspheres with flower-like morphology is reported
that proceeds via the reduction of iron(III) oxide under a hydrogen atmosphere. The ensuing magnetic
catalyst is well characterized by XRD, FE-SEM, TEM, N2 adsorption-desorption isotherm, and
Mössbauer spectroscopy and explored for a simple yet efficient transfer hydrogenation reduction of a
variety of nitroarenes to respective anilines in good to excellent yields (up to 98%) employing hydrazine
hydrate. The catalyst could be easily separated at the end of a reaction using an external magnet and
can be recycled up to 10 times without any loss in catalytic activity.
Vapor Deposition of Semiconducting Phosphorus Allotropes into TiO2 Nanotube A...Pawan Kumar
Recent evidence of exponential environmental degradation will demand a drastic shift in research and development toward
exploiting alternative energy resources such as solar energy. Here, we
report the successful low-cost and easily accessible synthesis of hybrid
semiconductor@TiO2 nanotube photocatalysts. In order to realize its
maximum potential in harvesting photons in the visible-light range, TiO2
nanotubes have been loaded with earth-abundant, low-band-gap fibrous
red and black phosphorus (P). Scanning electron microscopy− and
scanning transmission electron microscopy−energy-dispersive X-ray
spectroscopy, X-ray diffraction, Raman spectroscopy, X-ray photoelectron microscopy, and UV−vis measurements have been performed,
substantiating the deposition of fibrous red and black P on top and
inside the cavities of 100-μm-long electrochemically fabricated nanotubes. The nanotubular morphology of titania and a vapor-transport technique are utilized to form heterojunctions of P and
TiO2. Compared to pristine anatase 3.2 eV TiO2 nanotubes, the creation of heterojunctions in the hybrid material resulted in
1.5−2.1 eV photoelectrocatalysts. An enhanced photoelectrochemical water-splitting performance under visible light compared
with the individual components resulted for the P@TiO2 hybrids. This feature is due to synergistically improved charge
separation in the heterojunction and more effective visible-light absorption. The electronic band structure and charge-carrier
dynamics are investigated in detail using ultraviolet photoelectron spectroscopy and Kelvin probe force microscopy to elucidate
the charge-separation mechanism. A Fermi-level alignment in P@TiO2 heterojunctions leads to a more reductive flat-band
potential and a deeper valence band compared to pristine P and thus facilitates a better water-splitting performance. Our results
demonstrate effective conversion efficiencies for the nanostructured hybrids, which may enable future applications in
optoelectronic applications such as photodetectors, photovoltaics, photoelectrochemical catalysts, and sensors.
Visible light assisted reduction of nitrobenzenes using Fe(bpy)3+2/rGOnanocom...Pawan Kumar
Visible-light-induced photocatalytic reduction of aromatic nitrobenzenes to the corresponding anilinesat room temperature using reduced graphene oxide (rGO) immobilized iron(II) bipyridine complex asphotocatalyst is described. The rGO-immobilized iron catalyst exhibited superior catalytic activity thanhomogeneous iron(II) bipyridine complex and much higher than metal free rGO photocatalysts. Theheterogeneous photocatalyst was found to be robust and could easily be recovered and reused for severalruns without any significant loss in photocatalytic activity.
A ruthenium trinuclear polyazine complex was synthesized and subsequently immobilized through
complexation to a graphene oxide support containing phenanthroline ligands (GO-phen). The developed
photocatalyst was used for the photocatalytic reduction of CO2 to methanol, using a 20 watt white cold
LED flood light, in a dimethyl formamide–water mixture containing triethylamine as a reductive
quencher. After 48 h illumination, the yield of methanol was found to be 3977.57 5.60 mmol gcat
1.
The developed photocatalyst exhibited a higher photocatalytic activity than graphene oxide, which
provided a yield of 2201.40 8.76 mmol gcat
1. After the reaction, the catalyst was easily recovered and
reused for four subsequent runs without a significant loss of catalytic activity and no leaching of the
metal/ligand was detected during the reaction.
Sunlight-driven water-splitting using two-dimensional carbon based semiconduc...Pawan Kumar
The overwhelming challenge of depleting fossil fuels and anthropogenic carbon emissions has driven research into alternative clean sources of energy. To achieve the goal of a carbon neutral economy, the harvesting of sunlight by using photocatalysts to split water into hydrogen and oxygen is an expedient approach to fulfill the energy demand in a sustainable way along with reducing the emission of greenhouse gases. Even though the past few decades have witnessed intensive research into inorganic semiconductor photocatalysts, their quantum efficiencies for hydrogen production from visible photons remain too low for the large scale deployment of this technology. Visible light absorption and efficient charge separation are two key necessary conditions for achieving the scalable production of hydrogen from water. Two-dimensional carbon based nanoscale materials such as graphene oxide, reduced …
Sunlight-driven water-splitting using twodimensional carbon based semiconductorsPawan Kumar
The overwhelming challenge of depleting fossil fuels and anthropogenic carbon emissions has driven research
into alternative clean sources of energy. To achieve the goal of a carbon neutral economy, the harvesting of
sunlight by using photocatalysts to split water into hydrogen and oxygen is an expedient approach to fulfill
the energy demand in a sustainable way along with reducing the emission of greenhouse gases. Even though
the past few decades have witnessed intensive research into inorganic semiconductor photocatalysts, their
quantum efficiencies for hydrogen production from visible photons remain too low for the large scale
deployment of this technology. Visible light absorption and efficient charge separation are two key necessary
conditions for achieving the scalable production of hydrogen from water. Two-dimensional carbon based
nanoscale materials such as graphene oxide, reduced graphene oxide, carbon nitride, modified 2D carbon
frameworks and their composites have emerged as potential photocatalysts due to their astonishing
properties such as superior charge transport, tunable energy levels and bandgaps, visible light absorption,
high surface area, easy processability, quantum confinement effects, and high photocatalytic quantum yields.
The feasibility of structural and chemical modification to optimize visible light absorption and charge
separation makes carbonaceous semiconductors promising candidates to convert solar energy into chemical
energy. In the present review, we have summarized the recent advances in 2D carbonaceous photocatalysts
with respect to physicochemical and photochemical tuning for solar light mediated hydrogen evolution.
Heterojunctions of halogen-doped carbon nitride nanosheets and BiOI for sunli...Pawan Kumar
A fluorine-doped, chlorine-intercalated carbon nitride (CNF-Cl) photocatalyst has been synthesized for simultaneous improvements in light harvesting capability along with suppression
of charge recombination in bulk g-C3N4. The formation of heterojunctions of these CNF-Cl nanosheets with low bandgap, earth abundant bismuth oxyiodide (BiOI) was achieved, and the
synthesized heterojunctions were tested as active photoanodes in photoelectrochemical water splitting experiments. BiOI/CNF-Cl heterojunctions exhibited extended light harvesting with a
band-edge of 680 nm and generated photocurrent densities approaching 1.3 mA cm−2 under AM1.5 G one sun illumination. Scanning Kelvin probe force microscopy under optical bias
showed a surface potential of 207 mV for the 50% BiOI/CNF-Cl nanocomposite, while pristine CNF-Cl and BiOI had surface photopotential values of 83 mV and 98 mV, respectively, which in turn, provided direct evidence of superior charge separation in the heterojunction blends. Enhanced charge carrier separation and improved light harvesting capability in BiOI/CNF-Cl hybrids were found to be the dominant factors in increased photocurrent, compared to the pristine constituent materials.
Heterojunctions of halogen-doped carbon nitride nanosheets and BiOI for sunli...Pawan Kumar
A fluorine-doped, chlorine-intercalated carbon nitride (CNF-Cl) photocatalyst has been synthesized for simultaneous improvements in light harvesting capability along with suppression of charge recombination in bulk gC 3 N 4. The formation of heterojunctions of these CNF-Cl nanosheets with low bandgap, earth abundant bismuth oxyiodide (BiOI) was achieved, and the synthesized heterojunctions were tested as active photoanodes in photoelectrochemical water splitting experiments. BiOI/CNF-Cl heterojunctions exhibited extended light harvesting with a band-edge of 680 nm and generated photocurrent densities approaching 1.3 mA cm− 2 under AM1. 5 G one sun illumination. Scanning Kelvin probe force microscopy under optical bias showed a surface potential of 207 mV for the 50% BiOI/CNF-Cl nanocomposite, while pristine CNF-Cl and BiOI had surface photopotential values of 83 mV and 98 mV …
Water-splitting photoelectrodes consisting of heterojunctions of carbon nitri...Pawan Kumar
Quinary and senary non-stoichiometric double perovskites such as Ba2Ca0.66Nb1.34-xFexO6-δ (BCNF) have been utilized for gas sensing, solid oxide fuel cells and thermochemical CO2 reduction. Herein, we examined their potential as narrow bandgap semiconductors for use in solar energy harvesting. A cobalt co-doped BCNF, Ba2Ca0.66Nb0.68Fe0.33Co0.33O6-δ (BCNFCo), exhibited an optical absorption edge at ~ 800 nm, p-type conduction and a distinct photoresponse upto 640 nm while demonstrating high thermochemical stability. A nanocomposite of BCNFCo and g-C3N4 (CN) was prepared via a facile solvent assisted exfoliation/blending approach using dichlorobenzene and glycerol at a moderate temperature. The exfoliation of g-C3N4 followed by wrapping on perovskite established an effective heterojunction between the materials for charge separation. The conjugated 2D sheets of CN enabled better charge migration resulting in increased photoelectrochemical performance. A blend composed of 40 wt% perovskite and CN performed optimally, whilst achieving a photocurrent density as high as 1.5 mA cm-2 for sunlight-driven water-splitting with a Faradaic efficiency as high as ~ 88%.
Coproduction of hydrogen and lactic acid from glucose photocatalysis on band-...Pawan Kumar
Photocatalytic transformation of biomass into value-added chemicals coupled with co-production of hydrogen provides an explicit route to trap sunlight into the chemical bonds. Here, we demonstrate a rational design of Zn1-xCdxS solid solution homojunction photocatalyst with a pseudo-periodic cubic zinc blende (ZB) and hexagonal wurtzite (WZ) structure for efficient glucose conversion to simultaneously produce hydrogen and lactic acid. The optimized Zn0.6Cd0.4S catalyst consists of a twinning superlattice, has a tuned bandgap, and displays excellent efficiency with respect to hydrogen generation (690 ± 27.6 μmol·h−1·gcat.−1), glucose conversion (~90%), and lactic acid selectivity (~87%) without any co-catalyst under visible light irradiation. The periodic WZ/ZB phase in twinning superlattice facilitates better charge separation, while superoxide radical (⋅O2-) and photogenerated holes drive the glucose transformation and water oxidation reactions, respectively. This work demonstrates that rational photocatalyst design could realize an efficient and concomitant production of hydrogen and value-added chemicals from glucose photocatalysis.
Multifunctional carbon nitride nanoarchitectures for catalysisPawan Kumar
Catalysis is at the heart of modern-day chemical and pharmaceutical industries, and there is an urgent demand to develop metal-free, high surface area, and efficient catalysts in a scalable, reproducible and economic manner. Amongst the ever-expanding two-dimensional materials family, carbon nitride (CN) has emerged as the most researched material for catalytic applications due to its unique molecular structure with tunable visible range band gap, surface defects, basic sites, and nitrogen functionalities. These properties also endow it with anchoring capability with a large number of catalytically active sites and provide opportunities for doping, hybridization, sensitization, etc. To make considerable progress in the use of CN as a highly effective catalyst for various applications, it is critical to have an in-depth understanding of its synthesis, structure and surface sites. The present review provides an overview of the recent advances in synthetic approaches of CN, its physicochemical properties, and band gap engineering, with a focus on its exclusive usage in a variety of catalytic reactions, including hydrogen evolution reactions, overall water splitting, water oxidation, CO2 reduction, nitrogen reduction reactions, pollutant degradation, and organocatalysis. While the structural design and band gap engineering of catalysts are elaborated, the surface chemistry is dealt with in detail to demonstrate efficient catalytic performances. Burning challenges in catalytic design and future outlook are elucidated.
Nanoengineered Au-Carbon Nitride Interfaces Enhance PhotoCatalytic Pure Water...Pawan Kumar
Photocatalytic pure water splitting using solar energy is one of the promising routes to produce sustainable green hydrogen (H2). Tuning the interfacial active site density at catalytic heterojunctions and better light management are imperative to steer the structure-activity correlations to enhance the photo-efficiency of nanocomposite photocatalysts. Herein, we report the decoration of nitrogen defects-rich carbon nitride CN(T) with metallic Au nanostructures of different morphologies and sizes to investigate their influence on the photocatalytic hydrogen evolution reactions (HER). The CN(T)-7-NP nano-heterostructure comprises Au nanoparticles (NPs) of ~7 nm and thiourea-derived defective CN exhibits an excellent H2 production rate of 76.8 µmol g–1 h–1 from pure water under simulated AM 1.5 solar irradiation. In contrast to large-size Au nanorods, the high activity of CN(T)-7-NP was attributed to their strong localized surface plasmon resonance (LSPR) mediated visible absorption and interfacial charge separation. The surface ligands used to control Au nanostructures morphology were found to play a major role in the stabilization of NPs and improve interfacial charge transport between Au NPs and CN(T). First-principles calculations revealed that defects in CN and Au-CN interfacial sites in these nanocomposites facilitate the separation of e-/h+ pairs after light excitation and provide lower energy barrier pathways for H2 production by photocatalytic water splitting.
HYDROGEN GENERATION FROM WASTE WATER BY USING SOLAR ENERGY | J4RV3I11004Journal For Research
Objective of this paper is to produce hydrogen which is an ideal fuel for the next generation because it is abundantly available in nature, energy efficient and clean. Wide varieties of technologies are available to produce hydrogen but only few of them are considered environmental friendly. Solar water splitting via photo catalytic reaction is one of them which have attracted tremendous attention. In this paper we are working on hydrogen production via solar splitting. Photo catalytic water splitting is one of the promising technologies to produce pure and clean hydrogen. Since it is reasonable having low process cost and has a small reactor, it can be made for house hold application and hence has a huge market potential. Generation of hydrogen under visible irradiation is the main area of work. Based on the literature reported here, visible irradiation can be achieved by doping of TiO2 with metal or non-metal. We have used Fe doping to increase the efficiency. The result indicates that Fe doped sieves produce more hydrogen than the normal TiO2 coated sieve and the efficiency can be increased if we increase the number of doped sieves and surface area.
Production of Renewable Fuels by the Photocatalytic Reduction of CO2 using Ma...Pawan Kumar
The photo-reductive performance of natural ilmenite was boosted and the production of renewable fuels from the reduction of CO2 was enhanced by doping the natural mineral with magnesium. The doping was achieved by high energy ball milling in the presence of MgO and Mg(NO3)2. The photo-reduction of CO2 in aqueous solution led to the evolution of H2, CH4, C2H4, and C2H6, and the insertion of Mg in the structure of ilmenite enabled increases of up to 1245% in the fuel production yield, reaching total production of 210.9 µmol h-1 gcat-1. Displacements of the conduction band to more negative potentials were evidenced for the samples doped with magnesium. Indirect effects such as increases in the valence band maximum, and the introduction of intermediate energy levels were also evidenced through the measurement of the crystallite size and the determination of the band structure of the materials. Mott-Schottky analyses of the samples showed the n-type nature of the semiconductor materials and enabled the estimation of the density of charge carriers, which strongly influenced the photocatalytic performance. The strong potential of the application of natural ilmenite in gas phase artificial photosynthesis was proved by the evaluation of CO2 reduction in gas conditions, which allowed the enhancement in the selectivity and significantly increased the production of CH4 as compared to aqueous solution, reaching an important yield of CH4 of 16.1 µmol h-1 gcat-1.
Similar to Polymeric carbon nitride-based photocatalysts for photoreforming of biomass derivatives (20)
Isolated Iridium Sites on Potassium-Doped Carbon-nitride wrapped Tellurium Na...Pawan Kumar
Many industrial processes such transesterification of fatty acid for biodiesel production, soap manufacturing and biosynthesis of ethanol generate glycerol as a major by-product that can be used to produce commodity chemicals. Photocatalytic transformation of glycerol is an enticing approach that can exclude the need of harsh oxidants and extraneous thermal energy. However, the product yield and selectivity remain poor due to low absorption and unsymmetrical site distribution on the catalyst surface. Herein, tellurium (Te) nanorods/nanosheets (TeNRs/NSs) wrapped potassium-doped carbon nitride (KCN) van der Waal (vdW) heterojunction (TeKCN) is designed to enhance charge separation and visible-NIR absorption. The iridium (Ir) single atom sites decoration on the TeKCN core-shell structure (TeKCNIr) promotes selective oxidation of glycerol to glyceraldehyde with a conversion of 45.6% and selectivity of 61.6% under AM1.5G irradiation. The catalytic selectivity can reach up to 88% under 450 nm monochromatic light. X-ray absorption spectroscopy (XAS) demonstrates the presence of undercoordinated IrN2O2 sites which improved catalytic selectivity for glycol oxidation. Band energies and computational calculations reveal faile charge transfer in the TeKCNIr heterostructure. EPR and scavenger tests discern that superoxide (O2•−) and hydroxyl (•OH) radicals are prime components driving glycerol oxidation.
Isolated Iridium Sites on Potassium-Doped Carbon-nitride wrapped Tellurium Na...Pawan Kumar
Many industrial processes such transesterification of fatty acid for biodiesel production, soap manufacturing and biosynthesis of ethanol generate glycerol as a major by-product that can be used to produce commodity chemicals. Photocatalytic transformation of glycerol is an enticing approach that can exclude the need of harsh oxidants and extraneous thermal energy. However, the product yield and selectivity remain poor due to low absorption and unsymmetrical site distribution on the catalyst surface. Herein, tellurium (Te) nanorods/nanosheets (TeNRs/NSs) wrapped potassium-doped carbon nitride (KCN) van der Waal (vdW) heterojunction (TeKCN) is designed to enhance charge separation and visible-NIR absorption. The iridium (Ir) single atom sites decoration on the TeKCN core-shell structure (TeKCNIr) promotes selective oxidation of glycerol to glyceraldehyde with a conversion of 45.6% and selectivity of 61.6% under AM1.5G irradiation. The catalytic selectivity can reach up to 88% under 450 nm monochromatic light. X-ray absorption spectroscopy (XAS) demonstrates the presence of undercoordinated IrN2O2 sites which improved catalytic selectivity for glycol oxidation. Band energies and computational calculations reveal faile charge transfer in the TeKCNIr heterostructure. EPR and scavenger tests discern that superoxide (O2•−) and hydroxyl (•OH) radicals are prime components driving glycerol oxidation.
Isolated Iridium Sites on Potassium-Doped Carbon-nitride wrapped Tellurium Na...Pawan Kumar
Many industrial processes such transesterification of fatty acid for biodiesel production, soap manufacturing and biosynthesis of ethanol generate glycerol as a major by-product that can be used to produce commodity chemicals. Photocatalytic transformation of glycerol is an enticing approach that can exclude the need of harsh oxidants and extraneous thermal energy. However, the product yield and selectivity remain poor due to low absorption and unsymmetrical site distribution on the catalyst surface. Herein, tellurium (Te) nanorods/nanosheets (TeNRs/NSs) wrapped potassium-doped carbon nitride (KCN) van der Waal (vdW) heterojunction (TeKCN) is designed to enhance charge separation and visible-NIR absorption. The iridium (Ir) single atom sites decoration on the TeKCN core-shell structure (TeKCNIr) promotes selective oxidation of glycerol to glyceraldehyde with a conversion of 45.6% and selectivity of 61.6% under AM1.5G irradiation. The catalytic selectivity can reach up to 88% under 450 nm monochromatic light. X-ray absorption spectroscopy (XAS) demonstrates the presence of undercoordinated IrN2O2 sites which improved catalytic selectivity for glycol oxidation. Band energies and computational calculations reveal faile charge transfer in the TeKCNIr heterostructure. EPR and scavenger tests discern that superoxide (O2•−) and hydroxyl (•OH) radicals are prime components driving glycerol oxidation.
Solar-Driven Cellulose Photorefining into Arabinose over Oxygen-Doped Carbon ...Pawan Kumar
Biomass photorefining is a promising strategy to address the energy crisis and transition toward carbon carbon-neutral society. Here, we demonstrate the feasibility of direct cellulose photorefining into arabinose by a rationally designed oxygen-doped polymeric carbon nitride, which generates favorable oxidative species (e.g., O2–, •OH) for selective oxidative reactions at neutral conditions. In addition, we also illustrate the mechanism of the photocatalytic cellulose to arabinose conversion by density functional theory calculations. The oxygen insertion derived from oxidative radicals at the C1 position of glucose within cellulose leads to oxidative cleavage of β-1,4 glycosidic linkages, resulting in the subsequent gluconic acid formation. The following decarboxylation process of gluconic acid via C1–C2 α-scissions, triggered by surface oxygen-doped active sites, generates arabinose and formic acid, respectively. This work not only offers a mechanistic understanding of cellulose photorefining to arabinose but also sets up an example for illuminating the path toward direct cellulose photorefining into value-added bioproducts under mild conditions.
Solar-Driven Cellulose Photorefining into Arabinose over Oxygen-Doped Carbon ...Pawan Kumar
Biomass photorefining is a promising strategy to address the energy crisis and transition toward carbon carbon-neutral society. Here, we demonstrate the feasibility of direct cellulose photorefining into arabinose by a rationally designed oxygen-doped polymeric carbon nitride, which generates favorable oxidative species (e.g., O2–, •OH) for selective oxidative reactions at neutral conditions. In addition, we also illustrate the mechanism of the photocatalytic cellulose to arabinose conversion by density functional theory calculations. The oxygen insertion derived from oxidative radicals at the C1 position of glucose within cellulose leads to oxidative cleavage of β-1,4 glycosidic linkages, resulting in the subsequent gluconic acid formation. The following decarboxylation process of gluconic acid via C1–C2 α-scissions, triggered by surface oxygen-doped active sites, generates arabinose and formic acid, respectively. This work not only offers a mechanistic understanding of cellulose photorefining to arabinose but also sets up an example for illuminating the path toward direct cellulose photorefining into value-added bioproducts under mild conditions.
Solar-Driven Cellulose Photorefining into Arabinose over Oxygen-Doped Carbon ...Pawan Kumar
Biomass photorefining is a promising strategy to address the energy crisis and transition toward carbon carbon-neutral society. Here, we demonstrate the feasibility of direct cellulose photorefining into arabinose by a rationally designed oxygen-doped polymeric carbon nitride, which generates favorable oxidative species (e.g., O2–, •OH) for selective oxidative reactions at neutral conditions. In addition, we also illustrate the mechanism of the photocatalytic cellulose to arabinose conversion by density functional theory calculations. The oxygen insertion derived from oxidative radicals at the C1 position of glucose within cellulose leads to oxidative cleavage of β-1,4 glycosidic linkages, resulting in the subsequent gluconic acid formation. The following decarboxylation process of gluconic acid via C1–C2 α-scissions, triggered by surface oxygen-doped active sites, generates arabinose and formic acid, respectively. This work not only offers a mechanistic understanding of cellulose photorefining to arabinose but also sets up an example for illuminating the path toward direct cellulose photorefining into value-added bioproducts under mild conditions.
Partial Thermal Condensation Mediated Synthesis of High-Density Nickel Single...Pawan Kumar
Direct selective transformation of greenhouse methane (CH4) to liquid oxygenates (methanol) can substitute energy-intensive two-step (reforming/Fischer–Tropsch) synthesis while creating environmental benefits. The development of inexpensive, selective, and robust catalysts that enable room temperature conversion will decide the future of this technology. Single-atom catalysts (SACs) with isolated active centers embedded in support have displayed significant promises in catalysis to drive challenging reactions. Herein, high-density Ni single atoms are developed and stabilized on carbon nitride (NiCN) via thermal condensation of preorganized Ni-coordinated melem units. The physicochemical characterization of NiCN with various analytical techniques including HAADF-STEM and X-ray absorption fine structure (XAFS) validate the successful formation of Ni single atoms coordinated to the heptazine-constituted CN network. The presence of uniform catalytic sites improved visible absorption and carrier separation in densely populated NiCN SAC resulting in 100% selective photoconversion of (CH4) to methanol using H2O2 as an oxidant. The superior catalytic activity can be attributed to the generation of high oxidation (NiIII═O) sites and selective C─H bond cleavage to generate •CH3 radicals on Ni centers, which can combine with •OH radicals to generate CH3OH.
Partial Thermal Condensation Mediated Synthesis of High-Density Nickel Single...Pawan Kumar
Direct selective transformation of greenhouse methane (CH4) to liquid oxygenates (methanol) can substitute energy-intensive two-step (reforming/Fischer–Tropsch) synthesis while creating environmental benefits. The development of inexpensive, selective, and robust catalysts that enable room temperature conversion will decide the future of this technology. Single-atom catalysts (SACs) with isolated active centers embedded in support have displayed significant promises in catalysis to drive challenging reactions. Herein, high-density Ni single atoms are developed and stabilized on carbon nitride (NiCN) via thermal condensation of preorganized Ni-coordinated melem units. The physicochemical characterization of NiCN with various analytical techniques including HAADF-STEM and X-ray absorption fine structure (XAFS) validate the successful formation of Ni single atoms coordinated to the heptazine-constituted CN network. The presence of uniform catalytic sites improved visible absorption and carrier separation in densely populated NiCN SAC resulting in 100% selective photoconversion of (CH4) to methanol using H2O2 as an oxidant. The superior catalytic activity can be attributed to the generation of high oxidation (NiIII═O) sites and selective C─H bond cleavage to generate •CH3 radicals on Ni centers, which can combine with •OH radicals to generate CH3OH.
Selective Cellobiose Photoreforming for Simultaneous Gluconic Acid and Syngas...Pawan Kumar
Here, we demonstrate the selective cellobiose (building block of cellulose) photoreforming for gluconic acid and syngas co-production in acidic conditions by rationally designing a bifunctional polymeric carbon nitride (CN) with potassium/sulfur co-dopant. This heteroatomic doped CN photocatalyst possesses enhanced visible light absorption, higher charge separation efficiency than pristine CN. Under acidic conditions, cellobiose is not only more efficiently hydrolyzed into glucose but also promotes the syngas and gluconic acid production. Density functional theory (DFT) calculations reveal the favorable generation of •O2− during the photocatalytic reaction, which is essential for gluconic acid production. Consequently, the fine-designed photocatalyst presents excellent cellobiose conversion (>80%) and gluconic acid selectivity (>70%) together with the co-production of syngas (~56 μmol g-1 h-1) under light illumination. The current work demonstrates the feasibility of biomass photoreforming with value-added chemicals and syngas co-production under mild condition.
Selective Cellobiose Photoreforming for Simultaneous Gluconic Acid and Syngas...Pawan Kumar
Here, we demonstrate the selective cellobiose (building block of cellulose) photoreforming for gluconic acid and syngas co-production in acidic conditions by rationally designing a bifunctional polymeric carbon nitride (CN) with potassium/sulfur co-dopant. This heteroatomic doped CN photocatalyst possesses enhanced visible light absorption, higher charge separation efficiency than pristine CN. Under acidic conditions, cellobiose is not only more efficiently hydrolyzed into glucose but also promotes the syngas and gluconic acid production. Density functional theory (DFT) calculations reveal the favorable generation of •O2− during the photocatalytic reaction, which is essential for gluconic acid production. Consequently, the fine-designed photocatalyst presents excellent cellobiose conversion (>80%) and gluconic acid selectivity (>70%) together with the co-production of syngas (~56 μmol g-1 h-1) under light illumination. The current work demonstrates the feasibility of biomass photoreforming with value-added chemicals and syngas co-production under mild condition.
Selective Cellobiose Photoreforming for Simultaneous Gluconic Acid and Syngas...Pawan Kumar
Here, we demonstrate the selective cellobiose (building block of cellulose) photoreforming for gluconic acid and syngas co-production in acidic conditions by rationally designing a bifunctional polymeric carbon nitride (CN) with potassium/sulfur co-dopant. This heteroatomic doped CN photocatalyst possesses enhanced visible light absorption, higher charge separation efficiency than pristine CN. Under acidic conditions, cellobiose is not only more efficiently hydrolyzed into glucose but also promotes the syngas and gluconic acid production. Density functional theory (DFT) calculations reveal the favorable generation of •O2− during the photocatalytic reaction, which is essential for gluconic acid production. Consequently, the fine-designed photocatalyst presents excellent cellobiose conversion (>80%) and gluconic acid selectivity (>70%) together with the co-production of syngas (~56 μmol g-1 h-1) under light illumination. The current work demonstrates the feasibility of biomass photoreforming with value-added chemicals and syngas co-production under mild condition.
Partial Thermal Condensation Mediated Synthesis of High-Density Nickel Single...Pawan Kumar
Direct selective transformation of greenhouse methane (CH4) to liquid oxygenates (methanol) can substitute energy-intensive two-step (reforming/Fischer–Tropsch) synthesis while creating environmental benefits. The development of inexpensive, selective, and robust catalysts that enable room temperature conversion will decide the future of this technology. Single-atom catalysts (SACs) with isolated active centers embedded in support have displayed significant promises in catalysis to drive challenging reactions. Herein, high-density Ni single atoms are developed and stabilized on carbon nitride (NiCN) via thermal condensation of preorganized Ni-coordinated melem units. The physicochemical characterization of NiCN with various analytical techniques including HAADF-STEM and X-ray absorption fine structure (XAFS) validate the successful formation of Ni single atoms coordinated to the heptazine-constituted CN network. The presence of uniform catalytic sites improved visible absorption and carrier separation in densely populated NiCN SAC resulting in 100% selective photoconversion of (CH4) to methanol using H2O2 as an oxidant. The superior catalytic activity can be attributed to the generation of high oxidation (NiIII═O) sites and selective C─H bond cleavage to generate •CH3 radicals on Ni centers, which can combine with •OH radicals to generate CH3OH.
Recent advancements in tuning the electronic structures of transitional metal...Pawan Kumar
The smooth transition from finite non-renewables to renewable energy conversion technologies will require efficient electrocatalysts which can harness intermittent energies to store in the form of chemical bonds. The oxygen evolution reaction (OER) impedes the widespread usage of water electrolyzers to convert H2O into H2 and persists as a bottleneck, including other energy conversion devices with sluggish four H+/e− kinetics. In this context, designing highly active and stable catalysts capable of driving a lower overpotential in the OER to produce continuous hydrogen (H2) is a primary demanded. This chapter discussed the mechanism of the OER in conventional adsorbate oxygen and lattice oxygen participation in transition metal oxides (TMOs). Further, the influences of surface engineering, doping, and defects in the TMOs and understanding the electronic structure to screen electrodes towards the structure–activity relationship are highlighted. Specifically, the adsorption strength of O 2p is understood in detail as its binding ability over the surface of TMOs can be correlated directly to the OER activity. The iterative development of TMOs in terms of understanding electronic structural attributes is essential for the commercial deployment of energy conversion technologies. The comprehensive outlook of this chapter investigates thoroughly how TMOs can be used as significant materials for the OER in the near future.
Hole transport materials (HTMs) have a significant impact on the effectiveness of organic electronic devices; therefore, we present a molecular architecture of pyrazino[2,3-g]quinoxaline (PQ10)-based room-temperature organic liquid crystalline semiconductor (OLCS) as an alternative HTM. The PQ10 compound exhibits three different rectangular columnar (Colr) phases offering an impressive hole mobility of 8.8 × 10−3 cm2V−1s−1 which is found to be dexterous than most of existing polymeric hole transport materials. The charge transport mechanism is governed by the hole polarons hopping through H-aggregates of the PQ10 molecules and the hole mobility remains nearly constant throughout the mesophase range, but it decreases with increasing applied electric field. The current-voltage characteristics of the PQ10 have also been investigated in all three Colr phases and explained via the Poole-Frenkel conduction mechanism. The dielectric spectroscopy has been eventually carried out to understand the nature of dielectric permittivity and conductivity as a function of temperature and a correlation is established between the molecular architecture of the Colr phases and aforementioned physical properties. Solar cell simulation has been additionally performed to demonstrate that the PQ10 material can be a better choice as HTM for organic electronics and photovoltaic applications.
Nanoengineered Au-Carbon Nitride Interfaces Enhance Photo-Catalytic Pure Wate...Pawan Kumar
Photocatalytic pure water splitting using solar energy is one of the promising routes to produce sustainable green hydrogen (H2). Tuning the interfacial active site density at catalytic heterojunctions and better light management are imperative to steer the structure-activity correlations to enhance the photo-efficiency of nanocomposite photocatalysts. Herein, we report the decoration of nitrogen defects-rich carbon nitride CN(T) with metallic Au nanostructures of different morphologies and sizes to investigate their influence on the photocatalytic hydrogen evolution reactions (HER). The CN(T)-7-NP nano-heterostructure comprises Au nanoparticles (NPs) of ~7 nm and thiourea-derived defective CN exhibits an excellent H2 production rate of 76.8 µmol g–1 h–1 from pure water under simulated AM 1.5 solar irradiation. In contrast to large-size Au nanorods, the high activity of CN(T)-7-NP was attributed to their strong localized surface plasmon resonance (LSPR) mediated visible absorption and interfacial charge separation. The surface ligands used to control Au nanostructures morphology were found to play a major role in the stabilization of NPs and improve interfacial charge transport between Au NPs and CN(T). First-principles calculations revealed that defects in CN and Au-CN interfacial sites in these nanocomposites facilitate the separation of e-/h+ pairs after light excitation and provide lower energy barrier pathways for H2 production by photocatalytic water splitting.
Cooperative Copper Single Atom Catalyst in Two-dimensional Carbon Nitride for...Pawan Kumar
Renewable electricity powered carbon dioxide (CO2) reduction (eCO2R) to high-value fuels like methane (CH4) holds the potential to close the carbon cycle at meaningful scales. However, this kinetically staggered 8-electron multistep reduction still suffers from inadequate catalytic efficiency and current density. Atomic Cu-structures can boost eCO2R-to-CH4 selectivity due to enhanced intermediate binding energies (BEs) resulting from favorably shifted d-band centers. Herein, we exploit two-dimensional carbon nitride (CN) matrices, viz. Na-polyheptazine (PHI) and Li-polytriazine imides (PTI), to host Cu-N2 type single atom sites with high density (∼1.5 at%), via a facile metal ion exchange process. Optimized Cu loading in nanocrystalline Cu-PTI maximizes eCO2R-to-CH4 performance with Faradaic efficiency (FECH4) of ≈68% and a high partial current density of 348 mA cm−2 at a low potential of -0.84 V versus RHE, surpassing the state-of-the-art catalysts. Multi-Cu substituted N-appended nanopores in the CN frameworks yield thermodynamically stable quasi-dual/triple sites with large interatomic distances dictated by the pore dimensions. First-principles calculations elucidate the relative Cu-CN cooperative effects between the two matrices and how the Cu-Cu distance and local environment dictate the adsorbate BEs, density of states, and CO2-to-CH4 energy profile landscape. The 9N pores in Cu-PTI yield cooperative Cu-Cu sites that synergistically enhance the kinetics of the rate-limiting steps in the eCO2R-to-CH4 pathway.
Bioinspired multimetal electrocatalyst for selective methane oxidationPawan Kumar
Selective partial electrooxidation of methane (CH4) to liquid oxygenates has been a long-sought goal. However, the high activation energy of C–H bonds and competing oxygen evolution reaction limit product selectivity and reaction rates. Inspired by iron (IV)-oxo containing metalloenzymes’ functionality to activate the C–H bond, here we report on the design of a copper-iron-nickel catalyst for selective oxidation of CH4 to formate via a peroxide-assisted pathway. Each catalyst serves a specific role which is confirmed via electrochemical, in situ, and theoretical studies. A combination of electrochemical and in situ spectroelectrochemical studies revealed that H2O2 oxidation on nickel led to the formation of active oxygen species which trigger the formation of iron (IV) at low voltages. Density functional theory analysis helped reveal the role of iron (IV)-oxo species in reducing the activation energy barrier for CH4 deprotonation and the critical role of copper to suppress overoxidation. Our multimetal catalyst exhibits a formate faradaic efficiency of 42% at an applied potential of 0.9 V versus a reversible hydrogen electrode.
Radial Nano-Heterojunctions Consisting of CdS Nanorods Wrapped by 2D CN:PDI P...Pawan Kumar
Solar energy harvesting using semiconductor photocatalysis offers an enticing solution to two of the biggest societal challenges, energy scarcity and environmental pollution. After decades of effort, no photocatalyst exists which can simultaneously meet the demand for excellent absorption, high quantum efficiency and photochemical resilience/durability. While CdS is an excellent photocatalyst for hydrogen evolution, pollutant degradation and organic synthesis, photocorrosion of CdS leads to the deactivation of the catalyst. Surface passivation of CdS with 2D graphitic carbon nitrides (CN) such as g-C3N4 and C3N5 has been shown to mitigate the photocorrosion problem but the poor oxidizing power of photogenerated holes in CN limits the utility of this approach for photooxidation reactions. We report the synthesis of exfoliated 2D nanosheets of a modified carbon nitride constituted of tris-s-triazine (C6N7) linked pyromellitic dianhydride polydiimide (CN:PDI) with a deep oxidative highest occupied molecular orbital (HOMO) position, which ensures sufficient oxidizing power for photogenerated holes in CN. The heterojunction formed by the wrapping of mono-/few layered CN:PDI on CdS nanorods (CdS/CN:PDI) was determined to be an excellent photocatalyst for oxidation reactions including photoelectrochemical water splitting, dye decolorization and the photocatalytic conversion of benzyl alcohol to benzaldehyde. Extensive structural characterization using HR-TEM, Raman, XPS, etc., confirmed wrapping of few-layered CN:PDI on CdS nanorods. The increased photoactivity in CdS/CN:PDI catalyst was ascribed to facile electron transfer from CdS to CN:PDI in comparison to CdS/g-C3N4, leading to an increased electron density on the surface of the photocatalyst to drive chemical reactions.
Radial Nano-Heterojunctions Consisting of CdS Nanorods Wrapped by 2D CN:PDI P...Pawan Kumar
Solar energy harvesting using semiconductor photocatalysis offers an enticing solution to two of the biggest societal challenges, energy scarcity and environmental pollution. After decades of effort, no photocatalyst exists which can simultaneously meet the demand for excellent absorption, high quantum efficiency and photochemical resilience/durability. While CdS is an excellent photocatalyst for hydrogen evolution, pollutant degradation and organic synthesis, photocorrosion of CdS leads to the deactivation of the catalyst. Surface passivation of CdS with 2D graphitic carbon nitrides (CN) such as g-C3N4 and C3N5 has been shown to mitigate the photocorrosion problem but the poor oxidizing power of photogenerated holes in CN limits the utility of this approach for photooxidation reactions. We report the synthesis of exfoliated 2D nanosheets of a modified carbon nitride constituted of tris-s-triazine (C6N7) linked pyromellitic dianhydride polydiimide (CN:PDI) with a deep oxidative highest occupied molecular orbital (HOMO) position, which ensures sufficient oxidizing power for photogenerated holes in CN. The heterojunction formed by the wrapping of mono-/few layered CN:PDI on CdS nanorods (CdS/CN:PDI) was determined to be an excellent photocatalyst for oxidation reactions including photoelectrochemical water splitting, dye decolorization and the photocatalytic conversion of benzyl alcohol to benzaldehyde. Extensive structural characterization using HR-TEM, Raman, XPS, etc., confirmed wrapping of few-layered CN:PDI on CdS nanorods. The increased photoactivity in CdS/CN:PDI catalyst was ascribed to facile electron transfer from CdS to CN:PDI in comparison to CdS/g-C3N4, leading to an increased electron density on the surface of the photocatalyst to drive chemical reactions.
High-Density Cobalt Single-Atom Catalysts for Enhanced Oxygen Evolution React...Pawan Kumar
Single atom catalysts (SACs) possess unique catalytic properties due to low-coordination and unsaturated active sites. However, the demonstrated performance of SACs is limited by low SAC loading, poor metal–support interactions, and nonstable performance. Herein, we report a macromolecule-assisted SAC synthesis approach that enabled us to demonstrate high-density Co single atoms (10.6 wt % Co SAC) in a pyridinic N-rich graphenic network. The highly porous carbon network (surface area of ∼186 m2 g–1) with increased conjugation and vicinal Co site decoration in Co SACs significantly enhanced the electrocatalytic oxygen evolution reaction (OER) in 1 M KOH (η10 at 351 mV; mass activity of 2209 mA mgCo–1 at 1.65 V) with more than 300 h stability. Operando X-ray absorption near-edge structure demonstrates the formation of electron-deficient Co-O coordination intermediates, accelerating OER kinetics. Density functional theory (DFT) calculations reveal the facile electron transfer from cobalt to oxygen species-accelerated OER.
The use of Nauplii and metanauplii artemia in aquaculture (brine shrimp).pptxMAGOTI ERNEST
Although Artemia has been known to man for centuries, its use as a food for the culture of larval organisms apparently began only in the 1930s, when several investigators found that it made an excellent food for newly hatched fish larvae (Litvinenko et al., 2023). As aquaculture developed in the 1960s and ‘70s, the use of Artemia also became more widespread, due both to its convenience and to its nutritional value for larval organisms (Arenas-Pardo et al., 2024). The fact that Artemia dormant cysts can be stored for long periods in cans, and then used as an off-the-shelf food requiring only 24 h of incubation makes them the most convenient, least labor-intensive, live food available for aquaculture (Sorgeloos & Roubach, 2021). The nutritional value of Artemia, especially for marine organisms, is not constant, but varies both geographically and temporally. During the last decade, however, both the causes of Artemia nutritional variability and methods to improve poorquality Artemia have been identified (Loufi et al., 2024).
Brine shrimp (Artemia spp.) are used in marine aquaculture worldwide. Annually, more than 2,000 metric tons of dry cysts are used for cultivation of fish, crustacean, and shellfish larva. Brine shrimp are important to aquaculture because newly hatched brine shrimp nauplii (larvae) provide a food source for many fish fry (Mozanzadeh et al., 2021). Culture and harvesting of brine shrimp eggs represents another aspect of the aquaculture industry. Nauplii and metanauplii of Artemia, commonly known as brine shrimp, play a crucial role in aquaculture due to their nutritional value and suitability as live feed for many aquatic species, particularly in larval stages (Sorgeloos & Roubach, 2021).
DERIVATION OF MODIFIED BERNOULLI EQUATION WITH VISCOUS EFFECTS AND TERMINAL V...Wasswaderrick3
In this book, we use conservation of energy techniques on a fluid element to derive the Modified Bernoulli equation of flow with viscous or friction effects. We derive the general equation of flow/ velocity and then from this we derive the Pouiselle flow equation, the transition flow equation and the turbulent flow equation. In the situations where there are no viscous effects , the equation reduces to the Bernoulli equation. From experimental results, we are able to include other terms in the Bernoulli equation. We also look at cases where pressure gradients exist. We use the Modified Bernoulli equation to derive equations of flow rate for pipes of different cross sectional areas connected together. We also extend our techniques of energy conservation to a sphere falling in a viscous medium under the effect of gravity. We demonstrate Stokes equation of terminal velocity and turbulent flow equation. We look at a way of calculating the time taken for a body to fall in a viscous medium. We also look at the general equation of terminal velocity.
Phenomics assisted breeding in crop improvementIshaGoswami9
As the population is increasing and will reach about 9 billion upto 2050. Also due to climate change, it is difficult to meet the food requirement of such a large population. Facing the challenges presented by resource shortages, climate
change, and increasing global population, crop yield and quality need to be improved in a sustainable way over the coming decades. Genetic improvement by breeding is the best way to increase crop productivity. With the rapid progression of functional
genomics, an increasing number of crop genomes have been sequenced and dozens of genes influencing key agronomic traits have been identified. However, current genome sequence information has not been adequately exploited for understanding
the complex characteristics of multiple gene, owing to a lack of crop phenotypic data. Efficient, automatic, and accurate technologies and platforms that can capture phenotypic data that can
be linked to genomics information for crop improvement at all growth stages have become as important as genotyping. Thus,
high-throughput phenotyping has become the major bottleneck restricting crop breeding. Plant phenomics has been defined as the high-throughput, accurate acquisition and analysis of multi-dimensional phenotypes
during crop growing stages at the organism level, including the cell, tissue, organ, individual plant, plot, and field levels. With the rapid development of novel sensors, imaging technology,
and analysis methods, numerous infrastructure platforms have been developed for phenotyping.
Salas, V. (2024) "John of St. Thomas (Poinsot) on the Science of Sacred Theol...Studia Poinsotiana
I Introduction
II Subalternation and Theology
III Theology and Dogmatic Declarations
IV The Mixed Principles of Theology
V Virtual Revelation: The Unity of Theology
VI Theology as a Natural Science
VII Theology’s Certitude
VIII Conclusion
Notes
Bibliography
All the contents are fully attributable to the author, Doctor Victor Salas. Should you wish to get this text republished, get in touch with the author or the editorial committee of the Studia Poinsotiana. Insofar as possible, we will be happy to broker your contact.
Toxic effects of heavy metals : Lead and Arsenicsanjana502982
Heavy metals are naturally occuring metallic chemical elements that have relatively high density, and are toxic at even low concentrations. All toxic metals are termed as heavy metals irrespective of their atomic mass and density, eg. arsenic, lead, mercury, cadmium, thallium, chromium, etc.
Travis Hills' Endeavors in Minnesota: Fostering Environmental and Economic Pr...Travis Hills MN
Travis Hills of Minnesota developed a method to convert waste into high-value dry fertilizer, significantly enriching soil quality. By providing farmers with a valuable resource derived from waste, Travis Hills helps enhance farm profitability while promoting environmental stewardship. Travis Hills' sustainable practices lead to cost savings and increased revenue for farmers by improving resource efficiency and reducing waste.
Seminar of U.V. Spectroscopy by SAMIR PANDASAMIR PANDA
Spectroscopy is a branch of science dealing the study of interaction of electromagnetic radiation with matter.
Ultraviolet-visible spectroscopy refers to absorption spectroscopy or reflect spectroscopy in the UV-VIS spectral region.
Ultraviolet-visible spectroscopy is an analytical method that can measure the amount of light received by the analyte.