- Ultraframe is a new, innovative single sided formwork system that is much faster to erect than traditional methods. It uses modular stacking frames that can be easily attached and moved between pour locations without disassembly. - The Ultraframe system comes in three frame sizes up to 9.6m tall, allowing it to form walls of various heights. It is flexible in terms of the type of formwork used. - Ultraframe reduces costs by eliminating the need for wall ties, raking props, and other equipment. Its reusable anchor ties also reduce cast-in component costs.

1. Single sided formwork system
Ultraframe

2. Ultraframe - innovative
• Ultraframe is a new innovative single sided
formwork system from RMD Australia. It is
much faster to erect than traditional methods
• The formwork used can be either panels, such
as RMD’s Minima system or traditional
formwork
• Ultraframes modular design enables
formwork to be moved from one pour
location to another without disassembly
Ultraframe – a new, innovative, formwork system
Buxton Cement Works

3. Flexible in size and movement
• Ultraframe has three sizes of
modular stacking frames each 2.3m
high and a Super Slim Soldier top
extension. The three frames are
simply attached by pin connections
• Optional heavy duty wheels allow
easy movement of Ultraframe away
from the curing concrete wall so it
can be moved to the next pour
location without the need for a crane
Ultraframe – Modular and easy to move
BNRR CAMBA

4. Choose the finish you need
M60 Toll Road
• The inherent strength of the three
frame design of Ultraframe enables
it to reach a pour height of up to
9.6m, so it has the versatility to form
walls of relatively low to high
heights depending on your specific
needs
• The Ultraframe system supports
various types of formwork, which
makes it flexible in regards to which
formwork would work more cost
effectively on the project, or provide
the finish required
Ultraframe – The height and finish you want

5. Reduces labor and components needed
• Ultraframe eliminates the use of wall
ties and the need for external raking
props, therefore reducing equipment
required and labour costs
• Ultraframe’s re-usable anchor ties
reduce the cost of cast-in components,
thereby reducing the cost of the project
• Its high load anchorage capacity of up
to 500kN provides support for the
formwork. The two inclined ties carry all
loads due to the applied concrete
pressure. This keeps the system
securely in place
Scottish
Parliament
Building
Ultraframe – many parts are re-usable

6. Superslim and tie
Inclined tie carries all loads due to concrete
pressure.
Soldier components enable flexible
height adjustment to the top section. This
is a vital feature for formwork where
there is a roof above..
Ultraframe 1 - 5 metres

7. Jacks and Pins
Jacks invert to make rear
connections between frames.
Single pin makes front
connection between
frames.
Ultraframe 2 - 7.3 metres

8. Optional Wheel
Wheels with sliding axles enable stripping
and longitudinal movement of gang forms.
500kN tie loads in a pair of 26mm
diameter Ultrarapid ties.
Ultraframe 3 - 9.6 metres

9. Components
26mm diameter Cone, Bolt and
Sleeve, Anchor Plate and Anchor Jig.
Simple and Strong Tie System
Tie System in use

10. Components
Tongue extended
Tongue stowed
Minimize the cost of lost tie items.
Minimizes the time taken for connections

11. Components
Galvanized finish is used for a long and trouble free life.
Ultraframe Frames
Levelling Jack
Tie Beam
Stripping Jack
Cone Bolt
Rear Jack
One design criteria was low maintenance costs

12. Components
Wheels slide on the axles to enable
movement in two planes.
Optional wheels enable Ultraframe to be moved to the next pour

13. Single sided formwork system
Ultraframe