This document provides information about plate heat exchangers from Alfa Laval, including:
- The working principle is that channels are formed between corrugated plates allowing two media to flow through alternate channels and transfer heat through the plates with counter-current flow for highest efficiency.
- Standard materials include mild steel, stainless steel, titanium, nitrile and EPDM.
- Technical data includes pressure vessel codes and mechanical design pressures and temperatures for different models.
- Dimensions are provided for three models.
The COLTON blowdown tanks are vertical vented receivers designed to vent flash steam from intermittent boiler
blowdown and to allow the remaining condensate to cool before being discharged to the drain.
Heyyyyy como están ?, espero muy bien !!!!!, en esta oportunidad a través de un ejercicio, quiero mostrarte como en 4 pasos sencillos como puedes calcular el espesor de diseño de una tubería recta considerando presión interna según ASME B31.1
Utilizando tablas y graficos que te permitirán obtener propiedades necesarias para el cálculo . Este código se refiere principalmente a los efectos de la temperatura y la presión en los componentes de la tubería.
Las reglas de esta sección del Código se han elaborado teniendo en cuenta las necesidades de aplicaciones que incluyen las tuberías que suelen encontrarse en las centrales de generación de energía eléctrica, las plantas industriales, los sistemas de calefacción geotérmica y los sistemas de calefacción y refrigeración centrales.
En el Código B31.1, encontramos las condiciones de diseño que definen las presiones, temperaturas y diversas fuerzas aplicables al diseño de los sistemas de tuberías de potencia.
Estos sistemas de tuberías siempre se deben diseñar para la condición más severa de presión, temperatura y carga coincidentes, pero depende directamente de las necesidades de la planta y del usuario . La condición más severa será aquella que resulte en el mayor espesor de pared de la tubería requerido y la mayor clasificación de componentes.
En un gasoducto, el proceso inicial de diseño toma en cuenta los parámetros operacionales relacionados con la tasa de flujo, presión, temperatura, contaminantes, las construcciones que afectan el factor de seguridad y la ruta (tierra o costa afuera), con esta información podemos elaborar el diseño conceptual donde fijamos los tamaños estándares de la tubería, seleccionamos el material, todo esto nos permitirá evaluar la factibilidad técnica y costos. Parte del diseño esta relacionado al espesor. Acompañame en este post donde te enseñaré como calcular el espesor de diseño segun ASME B31.8 #diseño #ASMEB31 #gas #pipeline #ductos #design
ASME B31.4, es un código cuyo alcance técnico cubre los requisitos de diseño y construcción para sistemas de tubería de transporte por oleoducto de hidrocarburos líquidos y que reciente adopto los sistemas de tuberías para lodos (slurries). Acompáñame en este articulo y te ensenare como realizar el calculo de espesor de pared en tuberia recta segun ASME B31.4
Weiber is a leading manufacturer of Floor Level Cabinet Ovens. Large, low cost, shelf processing Floor Level
Cabinet Oven is specially designed for bulky or numerous parts at temperatures to 550°F. Work can be placed
directly on reinforced floor or shelf loaded.
Weiber Shelf Oven provides large work space at low cost. The equipment is ideal for shelf processing applications such as baking, drying, curing and preheating at temperatures up to 550 F.
The COLTON blowdown tanks are vertical vented receivers designed to vent flash steam from intermittent boiler
blowdown and to allow the remaining condensate to cool before being discharged to the drain.
Heyyyyy como están ?, espero muy bien !!!!!, en esta oportunidad a través de un ejercicio, quiero mostrarte como en 4 pasos sencillos como puedes calcular el espesor de diseño de una tubería recta considerando presión interna según ASME B31.1
Utilizando tablas y graficos que te permitirán obtener propiedades necesarias para el cálculo . Este código se refiere principalmente a los efectos de la temperatura y la presión en los componentes de la tubería.
Las reglas de esta sección del Código se han elaborado teniendo en cuenta las necesidades de aplicaciones que incluyen las tuberías que suelen encontrarse en las centrales de generación de energía eléctrica, las plantas industriales, los sistemas de calefacción geotérmica y los sistemas de calefacción y refrigeración centrales.
En el Código B31.1, encontramos las condiciones de diseño que definen las presiones, temperaturas y diversas fuerzas aplicables al diseño de los sistemas de tuberías de potencia.
Estos sistemas de tuberías siempre se deben diseñar para la condición más severa de presión, temperatura y carga coincidentes, pero depende directamente de las necesidades de la planta y del usuario . La condición más severa será aquella que resulte en el mayor espesor de pared de la tubería requerido y la mayor clasificación de componentes.
En un gasoducto, el proceso inicial de diseño toma en cuenta los parámetros operacionales relacionados con la tasa de flujo, presión, temperatura, contaminantes, las construcciones que afectan el factor de seguridad y la ruta (tierra o costa afuera), con esta información podemos elaborar el diseño conceptual donde fijamos los tamaños estándares de la tubería, seleccionamos el material, todo esto nos permitirá evaluar la factibilidad técnica y costos. Parte del diseño esta relacionado al espesor. Acompañame en este post donde te enseñaré como calcular el espesor de diseño segun ASME B31.8 #diseño #ASMEB31 #gas #pipeline #ductos #design
ASME B31.4, es un código cuyo alcance técnico cubre los requisitos de diseño y construcción para sistemas de tubería de transporte por oleoducto de hidrocarburos líquidos y que reciente adopto los sistemas de tuberías para lodos (slurries). Acompáñame en este articulo y te ensenare como realizar el calculo de espesor de pared en tuberia recta segun ASME B31.4
Weiber is a leading manufacturer of Floor Level Cabinet Ovens. Large, low cost, shelf processing Floor Level
Cabinet Oven is specially designed for bulky or numerous parts at temperatures to 550°F. Work can be placed
directly on reinforced floor or shelf loaded.
Weiber Shelf Oven provides large work space at low cost. The equipment is ideal for shelf processing applications such as baking, drying, curing and preheating at temperatures up to 550 F.
Five-zone split tube furnace with separated temperature control unit and max working temperature of 1100 oC. This five zone furnace can create step thermal gradient or one
constant temperature zone up to 25" length by adjusting five zone temperatures.
Five Zones Split Tube Furnace is a CE certified split 80mm OD (3" I.D) Five-zone tube furnace which can achieve faster heating up to 1200oC and create smooth thermal gradient or one uniform constant temperature zone by adjust four zone temperature.
Weiber has designed Gravity Convection Oven especially for, baking, sterilizing, drying evaporating, and heat treating, annealing and testing. The main aim behind the construction of oven is to remove moisture from chamber as quickly as possible in order to dry samples.For more information please logon http://cutt.us/PfIuS
Victory Energy Firetube Boiler for extreme duty - Frontier SeriesCTi Controltech
By design, the Frontier® Series 3-pass and 4-pass wetback, and now dryback too, boilers are engineered and built for minimum maintenance and maximum output. Wall-to-wall super-structure and rifled tubes ensure years of extreme-duty performance.
Victory Energy utilizes the "latest" burner/control technology available to establish the most dependable operation needed for your specific application.
Lab Vacuum oven is an oven that heats a sample in vacuum. WEIBER vacuum pumps are designed to provide excellent vacuum & temperature performance. Heating in vacuum is important for preventing oxidation and this allows the use of higher temperatures without boiling. The entire heat-treating process can take place under vacuum or precisely controlled atmospheres can be introduced. They are designed and manufactured to suit various I.S. & A.S.T.M. standards application in the growing field of Medical, Agricultural, Industrial, Research laboratories & Hospitals. For more information please visit: http://goo.gl/nr7jNi
Desco Medical India, a renowned name in the field of suppliers, exporters and manufacturers. Desco Medical is a reputed name in India and across the globe. It manufactures world class range of Medical and Hospital equipment and accessories. The one such much-demanded product of our extensive range is Laboratory Vertical Autoclave which is used for sterilization under saturated steam pressure.
https://goo.gl/YbmYDC
Goodman 5 Ton 16 Seer Air Conditioner Condenser W R410A Refrigerant at The Fu...Factory Furnace Outlet
Goodman 5 Ton 16 Seer Air Conditioner Condenser W R410A Refrigerant at The Furnace Outlet - Get a deal on Goodman 5 Ton Air Conditioner (AC) with 13, 14, 16 and 18 SEER for sale @ cheap prices from Factory Furnace Outlet Store and get extra discount.
Goodman 5 Ton 16 Seer Air Conditioner Condenser W R410A Refrigerant at The Fu...Factory Furnace Outlet
Goodman 5 Ton 16 Seer Air Conditioner Condenser W R410A Refrigerant at The Furnace Outlet - Get a deal on Goodman 5 Ton Air Conditioner (AC) with 13, 14, 16 and 18 SEER for sale @ cheap prices from Factory Furnace Outlet Store and get extra discount.
The benefit of convection is more even browning for baking and faster roasting, which seals in juices and prevents drying out of meats. Weiber offers user friendly, economical and high performance Convection Bench Oven with Self Timer. The oven timer is located on the oven control panel and is designed to be used to keep track of cooking times. Weiber timer feature allow users to set a specific time for the oven to start and stop. For More Information Please Logon http://goo.gl/6VPCUN
This is a packaged clean steam generator ready for use after connection of utilities. The unit produces clean steam using a purified feedwater source and plant steam.
Five-zone split tube furnace with separated temperature control unit and max working temperature of 1100 oC. This five zone furnace can create step thermal gradient or one
constant temperature zone up to 25" length by adjusting five zone temperatures.
Five Zones Split Tube Furnace is a CE certified split 80mm OD (3" I.D) Five-zone tube furnace which can achieve faster heating up to 1200oC and create smooth thermal gradient or one uniform constant temperature zone by adjust four zone temperature.
Weiber has designed Gravity Convection Oven especially for, baking, sterilizing, drying evaporating, and heat treating, annealing and testing. The main aim behind the construction of oven is to remove moisture from chamber as quickly as possible in order to dry samples.For more information please logon http://cutt.us/PfIuS
Victory Energy Firetube Boiler for extreme duty - Frontier SeriesCTi Controltech
By design, the Frontier® Series 3-pass and 4-pass wetback, and now dryback too, boilers are engineered and built for minimum maintenance and maximum output. Wall-to-wall super-structure and rifled tubes ensure years of extreme-duty performance.
Victory Energy utilizes the "latest" burner/control technology available to establish the most dependable operation needed for your specific application.
Lab Vacuum oven is an oven that heats a sample in vacuum. WEIBER vacuum pumps are designed to provide excellent vacuum & temperature performance. Heating in vacuum is important for preventing oxidation and this allows the use of higher temperatures without boiling. The entire heat-treating process can take place under vacuum or precisely controlled atmospheres can be introduced. They are designed and manufactured to suit various I.S. & A.S.T.M. standards application in the growing field of Medical, Agricultural, Industrial, Research laboratories & Hospitals. For more information please visit: http://goo.gl/nr7jNi
Desco Medical India, a renowned name in the field of suppliers, exporters and manufacturers. Desco Medical is a reputed name in India and across the globe. It manufactures world class range of Medical and Hospital equipment and accessories. The one such much-demanded product of our extensive range is Laboratory Vertical Autoclave which is used for sterilization under saturated steam pressure.
https://goo.gl/YbmYDC
Goodman 5 Ton 16 Seer Air Conditioner Condenser W R410A Refrigerant at The Fu...Factory Furnace Outlet
Goodman 5 Ton 16 Seer Air Conditioner Condenser W R410A Refrigerant at The Furnace Outlet - Get a deal on Goodman 5 Ton Air Conditioner (AC) with 13, 14, 16 and 18 SEER for sale @ cheap prices from Factory Furnace Outlet Store and get extra discount.
Goodman 5 Ton 16 Seer Air Conditioner Condenser W R410A Refrigerant at The Fu...Factory Furnace Outlet
Goodman 5 Ton 16 Seer Air Conditioner Condenser W R410A Refrigerant at The Furnace Outlet - Get a deal on Goodman 5 Ton Air Conditioner (AC) with 13, 14, 16 and 18 SEER for sale @ cheap prices from Factory Furnace Outlet Store and get extra discount.
The benefit of convection is more even browning for baking and faster roasting, which seals in juices and prevents drying out of meats. Weiber offers user friendly, economical and high performance Convection Bench Oven with Self Timer. The oven timer is located on the oven control panel and is designed to be used to keep track of cooking times. Weiber timer feature allow users to set a specific time for the oven to start and stop. For More Information Please Logon http://goo.gl/6VPCUN
This is a packaged clean steam generator ready for use after connection of utilities. The unit produces clean steam using a purified feedwater source and plant steam.
The combination of three factors such geometry configuration, optimized pipe diameters and special high efficiency fins, allows to improve the following features:
§ maximum capacity in relation to the heat exchanger size;
§ optimized pressure drops of the primary fluid thanks to the use of different tube diameters and achievable circuits; § possibility to select the optimal unit thanks to the use of different modules.
Convegno Europeo
IL PASSAGGIO AI REFRIGERANTI ALTERNATIVI:
IMPATTO SU IMPIANTI NUOVI ED ESISTENTI
Le Ultime Tecnologie nel Condizionamento e nella Refrigerazione; Sistemi, Attrezzatura, Componenti, Formazione e Certificazione; il Phase Down
15 marzo 2018 | 14.00 - 18.30
Mostra Convegno Expocomfort
Centro Congressi Stella Polare: Sala Sagittarius
Organizzato da ATF - Associazione Tecnici del Freddo
The Air Process heater will provide hot air and gas up to 1000 degree Fahrenheit (540 C) with infinite control by varying the voltage and air velocity supplied. Units are fitted with a tubing "T" for convenient power lead outlet, while larger diameters can be supplied with post terminals on the sheath for direct electrical connections.
The GS valve is a high performance variable orifice control valve. Known as a sliding gate valve, the GS3 seat design features a non turbulent, straight through flow path. The flow is broken apart into multiple streams creating a reduced field of energy. The result is greater service life, quieter operation and a control valve that performs at the highest levels possible within extreme conditions. Maximized temperatures and pressures, 986 F and 1,450 psi. Sizes 1/2″ – 10″ (DN 15 – 250) Carbon Steel and 316 Ti Stainless Steel, and Hastelloy C4 in select sizes.
Industrial Bimetallic Thermometers: 3 and 5 Inch Adjustable AngleMiller Energy, Inc.
Heavy duty, industrial bimetallic thermometers with a versatile case and stem that can be adjusted to almost any angle for easy viewing. The head can be rotated 360º and the stem positioning moves over 180º. These thermometers are rugged
and preferred by the process, offshore, power, pharmaceutical, and chemical industries.
The union connection is 1/2-14 NPT, but others are
Spirax Sarco, leader in products and services for steam system management, released the PV4 and PV6 piston valves for isolation purposes. The valves are available in NPT and SW versions, from ½” to 2”. Bodies are available in forged carbon steel or forged stainless steel.
These valves are designed to Class 800 and provide tight shutoff, suitable for steam, condensate and other liquid systems.
Hoffer Flow Controls has been designing and manufacturing quality turbine flowmeters and related process instrumentation. Hoffer Flow Controls manufactures high precision turbine flowmeters, not only for the cryogenic industry but is a world leader in turbine flowmeter technology for the measurement of clean liquids and gases throughout the processing industries.
Flowell Pneumatics Pvt Ltd is a Compressed Air Piping Manufacturer based in Pune. We design, supply and install modular aluminium compressed air piping systems.
<https://flowellpneumatics.in/>
Compressed Air Piping Manufacturer I Flowell Pneumatics
Ts20 alfa laval
1. 880-2715
h698
H
363
W
EPM00001EN 0503
How to contact Alfa Laval
Up-to-date Alfa Laval contact details for
all countries are always available on our
website at www.alfalaval.com
Working principle
Channels are formed between the plates and the corner ports
are arranged so that the two media flow through alternate
channels. The heat is transferred through the plate between
the channels, and complete counter-current flow is created
for highest possible efficiency. The corrugation of the plates
provides the passage between the plates, supports each plate
against the adjacent one and enhances the turbulence, result-
ing in efficient heat transfer.
STANDARD MATERIALS
Frame plate
Mild steel, Epoxy painted
Nozzles
Carbon steel
Metal lined: Stainless steel, Titanium
Rubber lined: Nitrile, EPDM
Plates
Stainless steel Alloy 316 or Titanium
Gaskets
Nitrile, EPDM or HeatSealF™
TECHNICAL DATA
Pressure vessel codes, PED, ASME, pvcALS™
Mechanical design pressure (g) / temperature
FM PED, pvcALS™ 1.0 MPa / 180°C
FG PED 1.6 MPa / 180°C *)
FG ASME 150 psig / 350°F
FG pvcALS™ 1.6 MPa / 180°C
FS PED 3.0 MPa / 160°C
FS ASME 150 psig / 350°F
*) Frame FG also approved for 1.2 MPa / 200ºC
to allow use in steam systems without safety valves.
CONNECTIONS
FM PED Size 200 mm DIN 2501, PN10,
ASME CI. 150
FM pvcALS™ Size 200 mm DIN 2501, PN10,
ASME CI. 150, JIS 10K
FG PED Size 200 mm DIN 2501, PN16,
ASME CI. 150
FG ASME Size 8" ASME CI. 150
FG pvcALS™ Size 200 mm DIN 2501, PN16,
ASME CI. 150, JIS 10K
FS PED Size 200 mm DIN 2501, PN25/PN40,
ASME CI. 300
FS ASME Size 8" ASME CI. 300/ASME CI. 150
Flow principle of a plate heat exchanger
Dimensions
Measurements (mm)
Type H W h
TS20-MFM 1405 740 360
TS20-MFG 1405 800 360
TS20-MFS 1435 800 390
All rights reserved for changes in specifications
Maximum heat transfer surface
85 m² (910 sq. ft)
Particulars required for quotation
– Flow rates or heat load
– Temperature program
– Physical properties of liquids in question (if not water)
– Desired working pressure
– Maximum permitted pressure drop
– Available steam pressure
The number of tightening bolts may vary depending on pressure rating.
