The ISV product line includes valve sizes ranging form 1/4" to 56" in pressure classes through 2500 and up to 10,000 psig working pressures with a large selection of body materials and trims.
Pipeline, Oil & Gas Service Ball Valves
API 6D and API 608, API 607 Firesafe with NACE compliance
2 & 3 piece trunion mounted ball valves
2 & 3 piece floating ball valves
Industrial Floating Ball Valves
API 608 / ASME B16.34, API 607 Firesafe with NACE compliance
2 & 3 piece flanged, SW, BW and NPT
Uni-body NPT
2 & 3 piece NPT industrial valves
Hytork® develops and manufacturers actuators for the automation of industrial valves. Product range includes pneumatic actuators and a wide range of control accessories. Product development is based on modular construction that allows for fast delivery from stock components and easy upgrade to control units as well as quick and efficient modification and repair.
Roth Pump standard steam condensate pump stations are the most popular and meet most water applications. These units will deliver hot water at temperatures up to 200˚F (93˚C) and will not vapor bind at 210˚F (98˚C). Receiver capacities from 8 (30 liters) to 50 gallons (189 liters) can be supplied on these standard condensate pump units.
Eliminate cavitation at high temperatures. Manage a higher load during cold starts. Dependable pumps to handle hotter water. Higher pressure at lower motor speeds. No mechanical seals below water line.
The Spirax Sarco Direct Operated Temperature Regulators are for use on steam and liquid applications. The regulators give stable, modulating control within close tolerances. On storage and constant load applications they will control at set value. On variable load applications they will normally operate within
a very narrow temperature band.
Titan Flow Controls Series CV-50 Check ValvePatrick Bryant
Titan Flow Control, Inc. is a full line manufacturer of high quality check valves, butterfly valves, pipeline strainer, pump products and fabricated designs.
In-line check valves
Silent check valves
Wafer type check valves
Globe type check valves
Single disc check valves
Reslient seated butterfly valves
Ball valves
Y and T strainers
Basket strainers
Suction diffusers
Foot valves
Fabricated products
Spirax Sarco provides knowledge, service, products and turnkey solutions for the control and efficient use of steam, air and other industrial fluids for industrial and commercial users.
Steam Traps - All types and sizes including repair kits
Regulators - Pressure, temperature, back pressure and relief
Condensate - Pumps Electric and steam driven
Control Systems - Valves and actuators
Steam traps are the hardest working components in the steam system. Maintenance or replacement of steam traps must be as quick and efficient as possible to avoid unnecessary disruption to related processes.
Traditional steam trapping assemblies often require the plant to be shut down for traps to be maintained or replaced taking significant time and reducing production output.
The PC3000 and PC4000 incorporate isolation valves, strainer, two-bolt steam trap connection and blowdown valves, all in a single unit for quick and easy installation and operation.
Historically electric actuators had never been deemed 'capable' in industrial applications. Not capable as they could not take the ambient temperatures of those application environments, they did not have the speed, they were not 'robust', they did not have the Fail-Safe capability, or if they did have all these attributes the cost was prohibitive. The ILEA series of industrial linear electric actuators overcomes previous weaknesses in electric valve actuators.
Steam thermocompressors utilize a flow of high pressure steam to boost the pressure of a stream of low pressure steam. The purpose can be to either recycle the low pressure steam with the added heat, or to create a usable steam supply from a low pressure steam source.
Hytork® develops and manufacturers actuators for the automation of industrial valves. Product range includes pneumatic actuators and a wide range of control accessories. Product development is based on modular construction that allows for fast delivery from stock components and easy upgrade to control units as well as quick and efficient modification and repair.
Roth Pump standard steam condensate pump stations are the most popular and meet most water applications. These units will deliver hot water at temperatures up to 200˚F (93˚C) and will not vapor bind at 210˚F (98˚C). Receiver capacities from 8 (30 liters) to 50 gallons (189 liters) can be supplied on these standard condensate pump units.
Eliminate cavitation at high temperatures. Manage a higher load during cold starts. Dependable pumps to handle hotter water. Higher pressure at lower motor speeds. No mechanical seals below water line.
The Spirax Sarco Direct Operated Temperature Regulators are for use on steam and liquid applications. The regulators give stable, modulating control within close tolerances. On storage and constant load applications they will control at set value. On variable load applications they will normally operate within
a very narrow temperature band.
Titan Flow Controls Series CV-50 Check ValvePatrick Bryant
Titan Flow Control, Inc. is a full line manufacturer of high quality check valves, butterfly valves, pipeline strainer, pump products and fabricated designs.
In-line check valves
Silent check valves
Wafer type check valves
Globe type check valves
Single disc check valves
Reslient seated butterfly valves
Ball valves
Y and T strainers
Basket strainers
Suction diffusers
Foot valves
Fabricated products
Spirax Sarco provides knowledge, service, products and turnkey solutions for the control and efficient use of steam, air and other industrial fluids for industrial and commercial users.
Steam Traps - All types and sizes including repair kits
Regulators - Pressure, temperature, back pressure and relief
Condensate - Pumps Electric and steam driven
Control Systems - Valves and actuators
Steam traps are the hardest working components in the steam system. Maintenance or replacement of steam traps must be as quick and efficient as possible to avoid unnecessary disruption to related processes.
Traditional steam trapping assemblies often require the plant to be shut down for traps to be maintained or replaced taking significant time and reducing production output.
The PC3000 and PC4000 incorporate isolation valves, strainer, two-bolt steam trap connection and blowdown valves, all in a single unit for quick and easy installation and operation.
Historically electric actuators had never been deemed 'capable' in industrial applications. Not capable as they could not take the ambient temperatures of those application environments, they did not have the speed, they were not 'robust', they did not have the Fail-Safe capability, or if they did have all these attributes the cost was prohibitive. The ILEA series of industrial linear electric actuators overcomes previous weaknesses in electric valve actuators.
Steam thermocompressors utilize a flow of high pressure steam to boost the pressure of a stream of low pressure steam. The purpose can be to either recycle the low pressure steam with the added heat, or to create a usable steam supply from a low pressure steam source.
SPX Flow, under the Pneumatic Products brand, manufactures single and twin tower desiccant dryers designed to remove water vapor from natural gas. The skid mounted units also include particulate and coalescing filters that capture solid contaminants to a submicron level.
Spirax Sarco, leader in products and services for steam system management, released the PV4 and PV6 piston valves for isolation purposes. The valves are available in NPT and SW versions, from ½” to 2”. Bodies are available in forged carbon steel or forged stainless steel.
These valves are designed to Class 800 and provide tight shutoff, suitable for steam, condensate and other liquid systems.
For closed-circuit cooling, Delta recommends a cooling tower plus a plate heat exchanger system. The skid-mounted plate heat exchanger provides a closed-circuit on the hot side of the heat exchanger. The non-corroding Delta cooling tower feeds the cold side of the plate heat exchanger.
The Williams & Davis Series 2000D is a classic 2-pass, dry-back horizontal firetube boiler that offers high efficiency, flexibility, reliability, safety and ease of operation. The Dryback design provides full access to boiler tubes, tube sheet, and furnace for ease of maintenance and includes single rear tube sheet construction, which reduces tube sheet stresses. Series 2000D provides high flue gas velocities and low stack temperatures to maximize its performance. All units are factory fire tested and shipped as an integrated package, ready for quick connection to utilities.
The Super High Efficiency Coalescing Filters (SHECF) are designed to remove liquid aerosols from compressed air and gas streams. Located upstream of air dryers, coalescing filters intercept liquid aerosols and coalesce them into larger droplets which are easily removed by gravity.
Applications oil industry: Wellhead control panels, chemical injection skids, hydraulic control packages, gas compression skids, offshore and onshore. Highly reliable devices utilizing the Custom Control Sensors Dual-Snap® Belleville disc spring principle. Turck® electrical connection for easy “plug and play” in Class I, Division 2 applications. Turck® connector provides superior ingress protection. Hermetically sealed electrical assembly for environmental protection. No electrical junction box required.Rigid, compact and internally adjustable for convenient field set point adjustment. Repeatable and stable set points.
Vibration and shock resistant. High cycle life. High over-pressure capability. Various options for wetted materials and electrical ratings to meet a wide range of application requirements and media compatibility.
There is a variant of the simple version of the butterfly valve that provides distinct advantages for many applications. Referred to somewhat officially as a triple offset butterfly valve, it can also be more commonly called simply a triple offset valve.
Titan brand Suction Diffuser provides pump protection while reducing space, energy, installation, and maintenance requirements. The Suction Diffuser functions as a strainer, preventing foreign materials and harmful particulates from entering the pump inlet. It also employs internal vanes that reduce turbulence to minimize stress and erosion of the pump body and components. The innovative product design allows a single component to replace three in a typical pump installation: elbow, strainer, entry pipe.
DHV Gate, Globe, Check, Ball, Wellhead, Choke, & API 6A Gate valves with material of carbon steel, cast iron, stainless steel and alloy steel. Based on our high technology equipped foundry facility, workshop and laboratory, we will leave you completely satisfied with our quality products in both commodity and special application lines.
This brochure provides an overview of our wellhead valves.
Groth Corporation's Pressure/Vacuum Relief Valves, Pressure Relief Valves, Vacuum Relief Valves, Pilot Operated Valves, Flame and Detonation Arresters, Emergency Relief Valves, Waste Gas Burners, Pressure Regulators and more have been protecting refineries, chemical processing plants and facilities with atmospheric, fixed-roof storage tanks for more than 50 years.
Recommended for industrial applications where large bore valves handle hot steam or isolate parts of their plants and have high/low temperatures that prevent the use of rubber lining elements.
Specifically Designed for any industry that must obtain pressure or level transmitter readings on tanks and vessels. Valves are designed to ASME B16.34 and feature minimal dead space, preventing build-up. Purge ports and optional milled flats enable Clean In Place and drainage without process interruption.
Bolt pattern accommodates standard industry ANSI 150# flanged connections and retrofits to knife gate patterns. Hardware configuration allows separate bolting of valve to tank and transmitter to valve as an additional safety measure for hazardous media.
There are industrial process control applications where it can be beneficial to operate valve actuators with pressurized water instead of compressed air. There are instances, common at remote sites, where compressed air is not available, but mains water supply in the pressure range from
60-100psi (4 - 7 bar) is present. Standard HYTORK XL Actuators have been used successfully in water applications but the manufacturer recommends that their XLW Actuators, specifically designed for water operation, are
used in this application to assure smooth and reliable operation. Specialties of the XLW series address concerns with corrosion protection, bearings and preventing ingress of particulates with the water. Contaminated water can cause
damage to the actuator seals and bearing areas, reducing operating efficiency and actuator life.
Flame control products for industrial fluid operationsCTi Controltech
Groth Corporation's Pressure/Vacuum Relief Valves, Pressure Relief Valves, Vacuum Relief Valves, Pilot Operated Valves, Flame and Detonation Arresters, Emergency Relief Valves, Waste Gas Burners, Pressure Regulators and more have been protecting refineries, chemical processing plants and facilities with atmospheric, fixed-roof storage tanks for more than 50 years.
ISTEC’s Aquametro Domino Chemical Meters (ATEX) are intended for use in potentially explosive atmospheres and are available in nominal diameter (DN) of 1/2" (15mm), 3/4" (20mm), 1" (25mm), 1-1/2" (40mm) and 2" (50mm). Flow measurement of liquids in chemical, chemo-technical, pharmaceutical, cosmetic and other industries for batching and filling operations.
Modular self-contained dryer modules incorporate all controls,diagnostics, filtration, and valved connection points to provide easy installation and startup. Combine multiple units to increase capacity and provide redundancy.
This is a packaged clean steam generator ready for use after connection of utilities. The unit produces clean steam using a purified feedwater source and plant steam.
Deflagration Flame Arresters are fire safety devices used to protect stored or process media from deflagrations. A deflagration flame arrester can be used on the top of a tank in certain conditions, as an in-line safety device where combustible gases are transported through low pressure pipe lines.
Krombach® Triple-Eccentric Valves (Tri-EX) AK110 come in fabricated designs from 4” to 112” and feature non-rubbing rotation to minimize required torque while maximizing life span of the seat and laminated seal ring. Valves specially designed to shut off in high temperature service where other, resilient seated valves are not well suited, such as many severe service refining and power applications.
Severe Service Control & Isolation Valves in the Refining IndustryCTi Controltech
Mogas Industries manufactures a line of industrial ball valves specifically designed for the most demanding applications, including extremes of temperature, pressure, abrasive particulates, acidic products, heavy solids build-up, and large pressure differential. The Mogas valves are designed to provide sufficient levels of safety and performance where the results of failure can be catastrophic. Specialty modifications also provide noise reduction and velocity control. The presentation illustrates and explains the special features needed to accommodate the world's most demanding valve applications, as well as providing process schematics for numerous industrial applications that show how the valves are used.
china wedge gatevalve in API600 and API6D ANSI standard,with quality certified sangong valve. http://www.sangongvalve.com/gate-valve/27-flexible-wedge-gate-valve.html
Used for oil gas steam energery power plant.
GWC Valve International Flanged Floating Ball Valves are designed, constructed, and tested according to API and ASME/ANSI Standards. Other
international standards including BS and Din available upon request.
GWC Valve International brochure for valves that we manufacture nationally and internationally.
GWC products are designed, engineered and manufactured to exceed your stringent process requirements.
GWC's Global Operations are licensed and certified to API-6D, API-6A, API-600, PED and ISO 9000.
SPX Flow, under the Pneumatic Products brand, manufactures single and twin tower desiccant dryers designed to remove water vapor from natural gas. The skid mounted units also include particulate and coalescing filters that capture solid contaminants to a submicron level.
Spirax Sarco, leader in products and services for steam system management, released the PV4 and PV6 piston valves for isolation purposes. The valves are available in NPT and SW versions, from ½” to 2”. Bodies are available in forged carbon steel or forged stainless steel.
These valves are designed to Class 800 and provide tight shutoff, suitable for steam, condensate and other liquid systems.
For closed-circuit cooling, Delta recommends a cooling tower plus a plate heat exchanger system. The skid-mounted plate heat exchanger provides a closed-circuit on the hot side of the heat exchanger. The non-corroding Delta cooling tower feeds the cold side of the plate heat exchanger.
The Williams & Davis Series 2000D is a classic 2-pass, dry-back horizontal firetube boiler that offers high efficiency, flexibility, reliability, safety and ease of operation. The Dryback design provides full access to boiler tubes, tube sheet, and furnace for ease of maintenance and includes single rear tube sheet construction, which reduces tube sheet stresses. Series 2000D provides high flue gas velocities and low stack temperatures to maximize its performance. All units are factory fire tested and shipped as an integrated package, ready for quick connection to utilities.
The Super High Efficiency Coalescing Filters (SHECF) are designed to remove liquid aerosols from compressed air and gas streams. Located upstream of air dryers, coalescing filters intercept liquid aerosols and coalesce them into larger droplets which are easily removed by gravity.
Applications oil industry: Wellhead control panels, chemical injection skids, hydraulic control packages, gas compression skids, offshore and onshore. Highly reliable devices utilizing the Custom Control Sensors Dual-Snap® Belleville disc spring principle. Turck® electrical connection for easy “plug and play” in Class I, Division 2 applications. Turck® connector provides superior ingress protection. Hermetically sealed electrical assembly for environmental protection. No electrical junction box required.Rigid, compact and internally adjustable for convenient field set point adjustment. Repeatable and stable set points.
Vibration and shock resistant. High cycle life. High over-pressure capability. Various options for wetted materials and electrical ratings to meet a wide range of application requirements and media compatibility.
There is a variant of the simple version of the butterfly valve that provides distinct advantages for many applications. Referred to somewhat officially as a triple offset butterfly valve, it can also be more commonly called simply a triple offset valve.
Titan brand Suction Diffuser provides pump protection while reducing space, energy, installation, and maintenance requirements. The Suction Diffuser functions as a strainer, preventing foreign materials and harmful particulates from entering the pump inlet. It also employs internal vanes that reduce turbulence to minimize stress and erosion of the pump body and components. The innovative product design allows a single component to replace three in a typical pump installation: elbow, strainer, entry pipe.
DHV Gate, Globe, Check, Ball, Wellhead, Choke, & API 6A Gate valves with material of carbon steel, cast iron, stainless steel and alloy steel. Based on our high technology equipped foundry facility, workshop and laboratory, we will leave you completely satisfied with our quality products in both commodity and special application lines.
This brochure provides an overview of our wellhead valves.
Groth Corporation's Pressure/Vacuum Relief Valves, Pressure Relief Valves, Vacuum Relief Valves, Pilot Operated Valves, Flame and Detonation Arresters, Emergency Relief Valves, Waste Gas Burners, Pressure Regulators and more have been protecting refineries, chemical processing plants and facilities with atmospheric, fixed-roof storage tanks for more than 50 years.
Recommended for industrial applications where large bore valves handle hot steam or isolate parts of their plants and have high/low temperatures that prevent the use of rubber lining elements.
Specifically Designed for any industry that must obtain pressure or level transmitter readings on tanks and vessels. Valves are designed to ASME B16.34 and feature minimal dead space, preventing build-up. Purge ports and optional milled flats enable Clean In Place and drainage without process interruption.
Bolt pattern accommodates standard industry ANSI 150# flanged connections and retrofits to knife gate patterns. Hardware configuration allows separate bolting of valve to tank and transmitter to valve as an additional safety measure for hazardous media.
There are industrial process control applications where it can be beneficial to operate valve actuators with pressurized water instead of compressed air. There are instances, common at remote sites, where compressed air is not available, but mains water supply in the pressure range from
60-100psi (4 - 7 bar) is present. Standard HYTORK XL Actuators have been used successfully in water applications but the manufacturer recommends that their XLW Actuators, specifically designed for water operation, are
used in this application to assure smooth and reliable operation. Specialties of the XLW series address concerns with corrosion protection, bearings and preventing ingress of particulates with the water. Contaminated water can cause
damage to the actuator seals and bearing areas, reducing operating efficiency and actuator life.
Flame control products for industrial fluid operationsCTi Controltech
Groth Corporation's Pressure/Vacuum Relief Valves, Pressure Relief Valves, Vacuum Relief Valves, Pilot Operated Valves, Flame and Detonation Arresters, Emergency Relief Valves, Waste Gas Burners, Pressure Regulators and more have been protecting refineries, chemical processing plants and facilities with atmospheric, fixed-roof storage tanks for more than 50 years.
ISTEC’s Aquametro Domino Chemical Meters (ATEX) are intended for use in potentially explosive atmospheres and are available in nominal diameter (DN) of 1/2" (15mm), 3/4" (20mm), 1" (25mm), 1-1/2" (40mm) and 2" (50mm). Flow measurement of liquids in chemical, chemo-technical, pharmaceutical, cosmetic and other industries for batching and filling operations.
Modular self-contained dryer modules incorporate all controls,diagnostics, filtration, and valved connection points to provide easy installation and startup. Combine multiple units to increase capacity and provide redundancy.
This is a packaged clean steam generator ready for use after connection of utilities. The unit produces clean steam using a purified feedwater source and plant steam.
Deflagration Flame Arresters are fire safety devices used to protect stored or process media from deflagrations. A deflagration flame arrester can be used on the top of a tank in certain conditions, as an in-line safety device where combustible gases are transported through low pressure pipe lines.
Krombach® Triple-Eccentric Valves (Tri-EX) AK110 come in fabricated designs from 4” to 112” and feature non-rubbing rotation to minimize required torque while maximizing life span of the seat and laminated seal ring. Valves specially designed to shut off in high temperature service where other, resilient seated valves are not well suited, such as many severe service refining and power applications.
Severe Service Control & Isolation Valves in the Refining IndustryCTi Controltech
Mogas Industries manufactures a line of industrial ball valves specifically designed for the most demanding applications, including extremes of temperature, pressure, abrasive particulates, acidic products, heavy solids build-up, and large pressure differential. The Mogas valves are designed to provide sufficient levels of safety and performance where the results of failure can be catastrophic. Specialty modifications also provide noise reduction and velocity control. The presentation illustrates and explains the special features needed to accommodate the world's most demanding valve applications, as well as providing process schematics for numerous industrial applications that show how the valves are used.
china wedge gatevalve in API600 and API6D ANSI standard,with quality certified sangong valve. http://www.sangongvalve.com/gate-valve/27-flexible-wedge-gate-valve.html
Used for oil gas steam energery power plant.
GWC Valve International Flanged Floating Ball Valves are designed, constructed, and tested according to API and ASME/ANSI Standards. Other
international standards including BS and Din available upon request.
GWC Valve International brochure for valves that we manufacture nationally and internationally.
GWC products are designed, engineered and manufactured to exceed your stringent process requirements.
GWC's Global Operations are licensed and certified to API-6D, API-6A, API-600, PED and ISO 9000.
GWC Valve International produces a full line of API-6D Trunnion Mounted Ball valves in both Three-Piece Forged and Two-Piece Cast Design. We offer a full range of materials in carbon, alloy and stainless steel from Trunnion Mounted Ball Valve Trunnion Ball Valve API 6A and API 6D general to severe in application.
GWC produces a full line of API-6D Trunnion Mounted Ball valves in both Three-Piece Forged and
Two-Piece Cast Design. We offer a full range of materials in carbon, alloy and stainless steel from
Trunnion Mounted Ball Valve Trunnion Ball Valve API 6A and API 6D general to severe in application.
JGB Enterprises complete line of Industrial Cleaning Hoses including Rubber, PVC & Plastic suction, Sewer cleaning, Vacuum, Water washdown & Discharge Hoses, has never made waste transfer so easy to meet the needs of every individual waste management customer. JGB Enterprises supplies a multitude of accessories including aluminum, polypropylene, & stainless camlock quick couplers, hose clamps & tools, strainers & sight glasses, valves, and more!
Metso's Neles® T5 series top entry rotary ball valves are designed to meet the requirements of chemical, petro-chemical and refining industries with improved process safety and efficiency of plant. T5 series valves with famous trunnion mounted Stemball® design are suitable with wide rangeability for demanding heavy duty rotary control applications such as crude oil, hot residual oil, LPG and other hydrocarbon gases and vapors under medium and high pressures. Unique Stemball® design combined with anti-cavitation and low noise Q-trim technology are making the T5 series valve most suitable with wide rangeability for demanding control applications like anti surge and blow down services. The new high noise reduction Q2-trim is available for gas applications.
Canawest Technologies Inc. offers premium quality butterfly valve in various designs such as, high pressure, high temperature and high sealing performance designs. Butterfly valve mainly used for segregating or regulating flow of water. For more details, visit: http://cwtvalve.com/butterfly-valve/.
Plug Valve Installation and Operating Instructionsalexbrown529
CWT Valve is one of the reputed manufacturers of Plug Valve. They offer a top quality plug valve in various designs such as cryogenic and steam jacketed plug valves, which are structured and designed to deliver high performance under the effective operative techniques. For more information, visit: http://cwtvalve.com/plug-valve/.
THINKTANK®️ is the leading manufacturer of control valves in China, we focus on the production and development of pneumatic or electric globe type control valves, self-operated pressure regulator and double-seat control valves
Una válvula de bola, conocida también como válvula de esfera, es un mecanismo de llave de paso que sirve para regular el flujo de un fluido canalizado y se caracteriza porque el mecanismo regulador situado en el interior es una bola perforada.
A ball valve, also known as a spherical valve, is a stopcock mechanism used to regulate the flow of a piped fluid and is characterised by having a perforated ball inside as its regulating mechanism.
Controls and regula- tors for ideal temperature, pressure and flow control; steam traps for efficient drainage of condensate for maximum heat transfer; flowmeters for precise mea- surement of liquids; liquid drain traps for automatic and continuous drain trap operation to boost system efficiency; rotary filters for increased productivity through proper filtering of fluids; condensate recovery pumps for effective condensate management to save water and sewage costs; stainless steel specialty products for maintaining quality and purity of steam; and a full range of pipeline auxiliaries, all work together to produce a productive steam system. Spirax Sarco’s new line of engineered equipment reduces installation costs with prefabricated assemblies and fabricated modules for system integrity and turnkey advantages.
Mining applications can be hard on the equipment. Abrasive, corrosive, erosive — all those conditions apply in varying proportions. So it can come as a relief to know that FluoroSeal® Non-Lubricated Plug Valves, both Sleeved and Lined, can handle even the hardest of condition combinations, in a variety of mining operations.
Roth regenerative turbine chemical duty pumps provide continuous, high pressure pumping of non-lubricating and corrosive liquids. These regenerative turbine pumps are provided with one piece, machined self-centering impellers for operation with a wide variety of chemicals .
Custom Control Sensors, Inc. (CCS) is a global leader in the design,
testing, manufacturing and supply of pressure, temperature and liquid
flow switches for the Industrial, Energy, Aerospace and Defense markets.
Founded in 1958, CCS revolutionized the industrial pressure switch
market by utilizing its patented Dual-Snap® disc spring technology.
KING-GAGE® Systems are designed and manufactured by King Engineering as application specific solutions for level measurement and inventory tank gauging. Our company furnishes components for new installations, upgrades, and retrofit applications on storage or processing vessels, including electronic pressure transmitters and sanitary level sensors to meet 3-A standards for clean-in-place applications. We provide graphic tank level indicators, digital processors, and operator interfaces in both single and multiple tank configurations supporting industrial protocols for PLC and/or LAN interfaces to simplify process control integration.
Pneumatic Products BAP desiccant dryer purifiers are designed to provide a continuous supply of clean, safe breathing air from your existing compressed air system.
Monitrol is a turn-key fluid control system including a globe style control valve, a variety of built in sensors for Flow, Pressure and Temperature, a High Precision Electric Actuator, along with controller and an easy to use Touch Screen interface. Monitrol can manage up to three variables (sensors), simultaneously with its control logic. Flexibility allows the control logic in Monitrol to be bypassed if that is desired. A Building Management System can still maintain all control and just make use of the sensor information if that is desired. A full range of I/O signals, feedback and modbus TCP communications are standard.
Hytork® develops and manufacturers actuators for the automation of industrial valves. The product range includes pneumatic actuators and a wide range of control accessories. Product development is based on modular construction that allows for fast delivery from stock components and easy upgrade to control units as well as quick and efficient modification and repair.
Three piece body valves area multi-purpose ball valves. They tend to be used in more demanding applications where maintenance will be required on a more frequent basis than 2 piece valves. The 3 piece body's center section can be removed to allow the valve end caps to be welded without the possibility of damaging the valve seats. Any combination of end connections can be supplied to meet your custom requirements.
Because of their structural design, trunnion mount ball valves are suitable for all pressure ranges and sizes.They are used by many manufacturers as a basis of design for their severe service ball valve offerings. A trunnion mount ball valve can also be advantageous for applications employing valve automation. Since the ball is not held in place by a tight fitting seal arrangement, operating torque tends to be lower for comparably sized trunnion valves, when compared to floating ball valves.
Ball valves are used throughout fluid based applications, from residential to heavy industrial. The compact and rugged design of this valve type provides superior service when properly applied. There are many variants of the basic design, with manufacturers providing builds that meet very specific and stringent requirements posed by certain types of industrial process control applications.
The application and suitability of existing and new valves at various function points throughout the power generation system is outlined and explained. The paper does a good job of reducing the complicated issue into a few pages of direct understandable explanation.
Steam heat exchange solutions allow heat to pass from a primary heat source to a secondary fluid without direct contact, the two main 'steam to water' types are 'shell & tube' and 'plate' heat exchangers.
Used in indirect heating applications.
Fluids can be heated in large volumes.
Safe, efficient & sterile.
Pre-assembled or un-assembled to suit your needs.
These extremely versatile traps work efficiently on both light and heavy condensate loads. Although compact in size, their discharge capacity is high and continuous, ensuring maximum heat transfer.
The KING-GAGE 780XD Purge Control is an extremely rugged unit designed specifically for hazardous areas requiring flameproof or ATEX (Ex d) rating. A proprietary wet check assembly ensures positive seal of fluids to ensure containment integrity. Loop powered transmitter provides 4-20mAdc output while components are isolated from the process media by a continuous air purge. Total consumption rate is less than 0.083 scfm for energy saving operation with external air/gas supply.The only internal element is a simple length of pipe extending into the tank.
A regenerative turbine pump varies from the more familiar centrifugal pump mostly in the design of its impeller. This design difference makes the regenerative turbine pump uniquely suited for low NPSH (Net Positive Suction Head) applications, among others. Regenerative turbine pumps can safely pump liquids close to the boiling point without the detriment of cavitation, and the pump design is suitable for handling highly unstable liquids.
Insertion turbine flow meters measure flow of liquid, gas, and
steam by detecting the frequency of rotation of the turbine blades. The frequency of turbine rotation is directly proportional to the flow velocity. Insertion turbine flow meters measure flow by detecting the local velocity within the pipe. The fluid velocity is combined with other parameters to calculate the average pipe velocity and volumetric flow rate.
Titan Flow Control, Inc. is proud to manufacture high quality check valves, y-strainers, basket strainers, duplex strainers, butterfly valves, pump protection products, fabricated products, and other pipeline accessories for commercial and industrial applications.
An illustrated outline of various methods and technologies used to measure steam boiler water level. Each is fully explained with an illustration, formulas, and commentary.
Cash Valve provides highly engineered pressure regulating and back pressure valves along with cost effective custom packages for OEM engineered applications for industrial and commercial customers who require mechanical control of pressure.
Cash Valve provides product from cryogenic through high temperature for Steam, Air, Gas, and Liquid applications meeting tight shut-off and extended service life. Cash Valve provides code certifications that meet various global standards such as PED, TPED, and Chinese as well as non-code requirements.
More from Mountain States Engineering and Controls (20)
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Trunnion Mount Ball Valves For Industrial Pipelines
1. Series BT3BSeries BT3B
Two Piece Trunnion MountedTwo Piece Trunnion Mounted
Ball ValveBall Valve
is a registered trademark of International Standard Valve, Inc.
www.isvalve.com sales@isvalve.com Bulletin No. ISV-SB210.7 Issue 09/2013
ASME
CLASS
150
through
1500
WCB
LCC
CF8M
Body
API 6D
Fire Safe
NACE
CE
®
International Standard Valve, Inc.
ISV
Mountain States Engineering and Controls
Lakewood, CO USA | 303-232-4100 | www.mnteng.com
2. Example: ISV figure number BT3B-F060-1210RF-DH-NFG
Describes an ASME class 600, two piece bolted body design, full port, trunnion supported ball valve, raised face flange ends, with WCB body material, carbon steel +
Electroless Nickel Plated ball-stem & trunnion, Devlon seat inserts, HNBR o-ring seals, gear operated, meets NACE and is fire safe tested.
1. Valve Type 2. Service /Design Style 3. Body Design 4. Bore 5. Pressure Rating 6. Body Material
Code Description
BT Ball Valve
Trunnion
BF Ball Valve
Floater
Code Description
0 Adjustable Packing-
(Commercial Design)
1 Adjustable Packing-
Flanged (API 608,
ASME B16.34)
2 Adjustable Packing
THRD,SW,NIPPLE,B
W Ends
(API 608, ASME
B16.34)
3 O-Ring Stem Seal
4 Metal Seated Valve
Code Description
A 1 pc End Entry
B 2 pc Split- Bolted
C 2 pc Threaded
D 2 pc Seal Weld
E 3 pc Bolted
F 3 pc Threaded
G 3 pc Welded
Code Description
R Reduced
F Full
S Standard Port
Code Class
015 Class 150
030 Class 300
040 Class 400
060 Class 600
090 Class 900
150 Class 1500
250 Class 2500
450 Class 4500
Code Description
11 A105N
12 WCB
21 A105N/LF2
24 LCC
36 CF8M
92 CS+ SS Seat
Pocket
7. Trim Material 8. End Connections 9. Seat 10. Seal 11. Features 12. Operator
Code Description
10 C.S. + ENP
30 Stainless
Steel
36 316SS /
CF8M
61 410 SS
Code Description
RF Flg-RF
RJ Flg-RTJ
FF Flg-FF
WW WE x WE
WF RF x WE
WJ RTJ x WE
Code Description
N Nylon
T PTFE
D Devlon
H HNBR
R R-PTFE
C TFM 4215
M TFM 4105
J TFM 1600
V Viton
E EPDM
F Delrin
Code Description
V Viton
H HNBR
L Low Temp.
(-50 F.) O-Ring
9 PTFE-LIP SEAL
G Graphite
T PTFE
M TFM
E EPDM
F Delrin
K Kel-F
Code Description
NF NACE
compliant,
Fire Safe
Tested
NW NACE
compliant,
Non-Fire
Tested
WF Without
NACE,
Fire Safe
Tested
WW Without
NACE Non-
Fire Tested
Code Description
L Locking Lever
B Bare Stem
A Actuated
G Manual Gear
H Non-locking
Lever
C Chain Wheel
O Oval Hand
wheel
S Spring Return
Lever
Code Description
Special
configurations.
Actuator Pad
Blowout proof stem
Low + high
pressure seat
sealing—Self
relieving seat
design
Metal backup
seats
accomplishes
fire safe
functionality.
NACE bolting is
standard
Drain valve for block
and bleed operation
3 mil. Electroless
Nickel Plated Trim
is Standard
Secondary
injection system
with separate
Internal Check
Valve for
Secondary
Sealing (standard
on 6” and larger,
optional on 2”-4”)
2” square operating
drive nut at hand
wheel hub.
Detachable hand
wheel
Locking device
standard with
gear operator
2-piece bolted
body design.
Design meets
API 6D, API
608 & ASME
B16.34.
Manufactured,
tested and
monogrammed
in accordance
with API 6D.
Rugged
polymeric seat
material
Each valve is
uniquely
serialized for
enhanced
traceability.
Fire safe tested
to API 607 5th
Edition
Product Certifications
API 6D
API 607
PED CE
13. Modifier Code
2
Specifying ISV Series No. BT3B 2 PC trunnion ball valves
ISV Series No. BT3B STANDARD FEATURES
B T 3 B - F 0 6 0 - 1 2 1 0 R F - D H - N F G -
1 2 3 4 5 6 7 8 9 10 11 12 13
Grease
injection fitting
for emergency
stem seal
3. ISV Series No. BT3B Two Piece Construction Trunnion Mounted Ball Valves
3
No Part Name Materials
1 Body A216 WCB A352 LCC A351 CF8M
2 End Cap A216 WCB A352 LCC A351 CF8M
3 Ball A105N + ENP Low temp A350 LF2 + ENP A182 F316
4 Stem AISI 1045 + ENP Low temp. C.S. + ENP 17-4PH
5 Seat Insert 1)
Devlon V 1)
(Class 150 & 300: 15% glass filled PTFE)
6 O-Ring HNBR Low temp. HNBR HNBR
7 Seat Ring A105N + ENP A350 LF2 + ENP A182 F316
8 Seat Gasket Graphite
9 Seat Pusher A105N + ENP A350 LF2 + ENP A182 F316
10 Seat Spring Inconel X-750
11 Gasket Graphite (Body-Cap Gasket is Graphite SPW 2)
12 Gland A105N + ENP A350 LF2 + ENP A182 F316
13 Trunnion A105N + ENP A350 LF2 + ENP A182 F316
14 Trunnion Cover 3)
A105N A350 LF2 A182 F316
15 Anti-static ball 304SS
16 Anti-static spring 304SS
17 Stem Key C.S.
18 Bearing C.S. + PTFE (DU) S.S. + PTFE
19 Thrust Washer S.S. + PTFE (DU) 4)
S.S. + PTFE 4)
20 Socket Cap Screw A574 (eq. B7M) A320 L7M A193 B8
21 Fire Seal Packing Graphite
22 Top Plate A105 + ENP A182 F316
23 Pin C.S.
24 Ball Thrust Washer PTFE 5)
25 Grease Injection Fitting Zinc plated carbon steel 316SS
26 Internal Check Valve Zinc plated carbon steel 316SS
27 Vent Plug Zinc plated carbon steel 316SS
28 Body Stud A193 B7M A320 L7M A193 B8
29 Body Nut A194 2HM A194 4M A194 8
30 Gear Stud C.S.
31 Gear Nut C.S.
32 Drain Valve Zinc plated carbon steel A276 316
33 Manual Gear Commercial Carbon Steel
1) Devlon is a registered trademark of the James Walker company
2) 304SS Spiral wound graphite body gaskets
3) Applies only to 6” – 12” class 150 & class 300 valves
4) 2” – 4” class 150 & class 300 valves are equipped with PTFE bearings
5) 6” and larger valves are equipped with C.S. + PTFE (DU) bearings
Material List of Trunnion Bal Valve (6” - 12” view)
4. ISV Series No. BT3B Two Piece Construction Trunnion Mounted Ball Valves
International Standard Valve, Inc. 10749 Cash Road, Stafford, Texas 77477
713-983-7600, sales@isvalve.com Bulletin No. ISV-SB210.7 Issue 09/2013
Pressure Test to API 6D (WCB body)
Shell Test Seat Test Seat Test
(Hydrostatic) (Hydrostatic) (Air)
Class 150 450 psi 313 psi 80 psi
Class 300 1125 psi 814 psi 80 psi
Class 600 2225 psi 1628 psi 80 psi
Class 900 3350 psi 2442 psi 80 psi
Class 1500 5575 psi 4076 psi 80 psi
Working Pressures (psi)
Class: 150 300 600 900 1500
O-ring Seals: HNBR HNBR HNBR HNBR HNBR
Seats Inserts: RPTFE RPTFE Devlon Devlon Devlon
Min. Temp: -20 deg. F. 285 740 1480 2220 3705
Max. Temp: 300 deg. F. 230 500 1250 1979 at 280 F 3320 at 260F
Dimensions and Weights
Valve Size: NPS 2" 2 1/2" 3" 4" 6" 8" 10" 12"
Class
150
d inch 2 2.5 3 4 6 8 10 12
L (RF) inch 7 7.5 8 9 15.5 18 21 24
L (BW) inch 8.5 9.5 11.13 12 18 20.5 22 25
L (RTJ) inch 7.5 8 8.5 9.5 16 18.5 21.5 24.5
H inch 6 6.5 7.63 8.4 10.9 12.6 15.56 18.13
W (Gear Hand wheel ) inch 18 18 24 24
WT (lbs)
RF 33 42 84 143 214 353 529 860
BW 39 38 77 121 205 340 501 805
Class
300
d inch 2 2.5 3 4 6 8 10 12
L (RF) inch 8.5 9.5 11.13 12 15.88 19.75 22.4 25.5
L (BW) inch 8.5 9.5 11.13 12 15.88 20.51 22 25
L (RTJ) inch 9.13 10.12 11.75 12.64 16.5 20.4 23 26.14
H inch 6 6.5 7.63 8.4 10.9 12.6 15.56 18.13
W (Gear Hand wheel ) inch 18 18 24 24
WT (lbs)
RF 40 60 104 176 260 441 805 1169
BW 31 49 84 143 232 408 754 1109
Class
600
d inch 2 2.5 3 4 6 8 10 12
L (RF) inch 11.5 13 14 17 22 26 31 33
L (BW) inch 11.5 13 14 17 22 26 31 33
L (RTJ) inch 11.63 13.13 14.13 17.13 22.13 26.13 31.14 33.13
H inch 7 6.5 7.7 8.4 10.7 13.5 19.5 22.88
W (Gear Hand wheel ) inch 18 18 24 24
WT (lbs)
RF 84 125 146 269 479 772 1565 2117
BW 69 113 128 258 441 721 1301 1742
Class
900
d inch 2 2 1/2 3 4 6 8 10 12
L (RF) inch 14.50 16.50 15.00 18.00 24.00 29.00 33.00 38.00
L (BW) inch 14.50 16.50 15.00 18.00 24.00 29.00 33.00 38.00
L (RTJ) inch 14.63 16.63 15.13 18.13 24.13 29.13 33.13 38.13
H inch 8.25 8.50 8.86 10.43 13.00 16.14 17.71 19.67
W (Gear Hand wheel ) inch 18 18 24 24 24
WT (lbs)
RF 106 132 172 304 747 1411 2117 2932
BW 99 117 165 289 582 1192 1764 2447
Class
1500
d inch 2.00 2.50 3.00 4.00 5.75 7.67 ― ―
L (RF) inch 14.50 16.50 18.50 21.50 27.75 32.75 ― ―
L (BW) inch 14.50 16.50 18.50 21.50 27.75 32.75 ― ―
L (RTJ) inch 14.63 16.63 18.63 21.63 28.00 33.13 ― ―
H inch 7.75 8.70 10.00 11.44 14.00 17.67 ― ―
W (Gear Hand wheel ) inch 18.00 18.00 24.00 24.00 ― ―
WT (lbs)
RF 121 176 258 476 1173 1918 ― ―
BW 113 157 181 331 913 1493 ― ―