Trolly ppt
•Download as PPTX, PDF•
2 likes•8,962 views
This document outlines a smart cart trolley project for automatic shopping billing and library management using wireless networks. It lists the project coordinators and guides, team members, block diagram of hardware components including a PIC microcontroller, barcode reader, smart card reader, EEPROM, buzzer, and LCD display. It also specifies the hardware components, software used including Keil μvision3 and Express PCB/SCH, and concludes that the automated system avoids manual errors and provides safety.
Report
Share
Report
Share
![Mr.R.Srivel,[HODECE].
2/9/2015 2
PROJECT COORDINATOR](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
Smart Intelligent trolley
The document describes a proposed smart trolley project. The project aims to reduce billing time in supermarkets by allowing for self-checkout using barcode scanners on a smart trolley. The trolley would contain a Raspberry Pi, barcode readers, display, and connect to the store's system wirelessly for billing. It provides background on current tedious billing processes, then outlines the proposed hardware and software components of the smart trolley, including a Raspberry Pi, barcode scanners, battery, and Android application.
Intelligent shopping cart
The document describes the design of an intelligent shopping trolley system that uses RFID and other technologies to automatically calculate bills, provide offer information to customers, and streamline the checkout process. The system is intended to make shopping faster, easier and cheaper by avoiding long payment lines, informing customers of deals, and allowing them to see billing details in advance. Key components of the system include an RFID reader, ZigBee module, display, and Arduino board to control operations and interface with a PC for processing payments.
Smart cards
Smart cards are small electronic devices about the size of a credit card that contain memory and an integrated circuit chip. They provide identification, authentication, and data storage capabilities. Smart cards were invented in 1968 and come in various types including embossed, magnetic stripe, memory, optical, microprocessor, and contactless cards. They have wide-ranging applications including use in payphones, banking, retail, electronic purse, health care, ID verification, and access control. Advantages of smart cards include flexibility, security, data integrity, and ease of use while disadvantages include fees, liability if stolen or lost, limited data capacity, and lack of universal technology support.
Smart Shopping System
This document presents a project proposal for a Smart Shopping System using RFID technology. The system aims to develop an automated billing process for supermarkets to expedite checkout. It proposes using RFID tags on products and a reader on a shopping cart. As products are added to the cart, their information is automatically detected and the running bill is updated. When checkout is ready, the final bill can be sent to the billing computer. This would eliminate long lines and reduce staff needs compared to traditional barcoded billing. The system architecture and methodology are presented, including hardware requirements like RFID tags and a reader, and software like a database and programming languages. Screenshots of prototype screens are also included. The conclusion states this system could benefit both
Paper battery in IEEE format
This document summarizes a paper about paper batteries. It begins by outlining the limitations of current battery technologies such as limited lifetimes, leakage, and environmental concerns. It then discusses previous work done to develop paper batteries, including early prototypes created by Pushparaj et al. and Yi Cui et al. and work by Dr. Mangilal Agrawal to customize output voltages. The document aims to analyze properties, applications, advantages, and disadvantages of paper batteries in depth based on literature. Paper batteries combine carbon nanotubes with conventional paper to create an ultra-thin, flexible energy storage device that can function as both a high-energy battery and supercapacitor.
Smart shopping system using rfid
This document proposes a smart shopping system using RFID technology that can automatically generate bills. Key features include:
1) RFID antennas will detect items in a shopping basket and automatically generate a bill using RFID tags on each product.
2) The system supports both registered users with smart cards for payment from preloaded balances as well as non-registered users who must pay at checkout.
3) Product details like codes, names, prices are stored in a database and the system has features for modifying, deleting, and generating automatic bills from detected inventory.
Latest Electrical Mini Projects For EEE Students
Simple Mini Projects For EEE Can Be Implemented By Using Microcontroller And Different Technologies. We Hope That Our Innovative Projects For EEE Students Offer Immense Help And Make Them Select Suitable Projects For Their Project Work.
https://www.elprocus.com
Visit our page to get more ideas on Electrical Mini Projects developed by professionals.
Elprocus provides free verified electronic projects kits around the world with abstracts, circuit diagrams, and free electronic software. We provide guidance manual for Do It Yourself Kits (DIY) with the modules at best price along with free shipping.
VOICE OPERATED WHEELCHAIR
This document describes a project to build a voice-operated wheelchair for physically disabled persons. The objective is to design hardware for voice recognition and corresponding wheelchair actions. Group members include Mandar Jadhav, Mayuresh Todkar and Dayanand Patil, guided by Dr. V. Jayashree. The system is aimed to help those paralyzed below the neck or with quadriplegia. It will allow independent wheelchair movement through voice commands without need for personal assistance. The design uses a microphone, voice recognition IC, microcontroller, motor drivers and batteries to power DC motors for forward, reverse, left and right wheelchair movement.
Recommended
Smart Intelligent trolley
The document describes a proposed smart trolley project. The project aims to reduce billing time in supermarkets by allowing for self-checkout using barcode scanners on a smart trolley. The trolley would contain a Raspberry Pi, barcode readers, display, and connect to the store's system wirelessly for billing. It provides background on current tedious billing processes, then outlines the proposed hardware and software components of the smart trolley, including a Raspberry Pi, barcode scanners, battery, and Android application.
Intelligent shopping cart
The document describes the design of an intelligent shopping trolley system that uses RFID and other technologies to automatically calculate bills, provide offer information to customers, and streamline the checkout process. The system is intended to make shopping faster, easier and cheaper by avoiding long payment lines, informing customers of deals, and allowing them to see billing details in advance. Key components of the system include an RFID reader, ZigBee module, display, and Arduino board to control operations and interface with a PC for processing payments.
Smart cards
Smart cards are small electronic devices about the size of a credit card that contain memory and an integrated circuit chip. They provide identification, authentication, and data storage capabilities. Smart cards were invented in 1968 and come in various types including embossed, magnetic stripe, memory, optical, microprocessor, and contactless cards. They have wide-ranging applications including use in payphones, banking, retail, electronic purse, health care, ID verification, and access control. Advantages of smart cards include flexibility, security, data integrity, and ease of use while disadvantages include fees, liability if stolen or lost, limited data capacity, and lack of universal technology support.
Smart Shopping System
This document presents a project proposal for a Smart Shopping System using RFID technology. The system aims to develop an automated billing process for supermarkets to expedite checkout. It proposes using RFID tags on products and a reader on a shopping cart. As products are added to the cart, their information is automatically detected and the running bill is updated. When checkout is ready, the final bill can be sent to the billing computer. This would eliminate long lines and reduce staff needs compared to traditional barcoded billing. The system architecture and methodology are presented, including hardware requirements like RFID tags and a reader, and software like a database and programming languages. Screenshots of prototype screens are also included. The conclusion states this system could benefit both
Paper battery in IEEE format
This document summarizes a paper about paper batteries. It begins by outlining the limitations of current battery technologies such as limited lifetimes, leakage, and environmental concerns. It then discusses previous work done to develop paper batteries, including early prototypes created by Pushparaj et al. and Yi Cui et al. and work by Dr. Mangilal Agrawal to customize output voltages. The document aims to analyze properties, applications, advantages, and disadvantages of paper batteries in depth based on literature. Paper batteries combine carbon nanotubes with conventional paper to create an ultra-thin, flexible energy storage device that can function as both a high-energy battery and supercapacitor.
Smart shopping system using rfid
This document proposes a smart shopping system using RFID technology that can automatically generate bills. Key features include:
1) RFID antennas will detect items in a shopping basket and automatically generate a bill using RFID tags on each product.
2) The system supports both registered users with smart cards for payment from preloaded balances as well as non-registered users who must pay at checkout.
3) Product details like codes, names, prices are stored in a database and the system has features for modifying, deleting, and generating automatic bills from detected inventory.
Latest Electrical Mini Projects For EEE Students
Simple Mini Projects For EEE Can Be Implemented By Using Microcontroller And Different Technologies. We Hope That Our Innovative Projects For EEE Students Offer Immense Help And Make Them Select Suitable Projects For Their Project Work.
https://www.elprocus.com
Visit our page to get more ideas on Electrical Mini Projects developed by professionals.
Elprocus provides free verified electronic projects kits around the world with abstracts, circuit diagrams, and free electronic software. We provide guidance manual for Do It Yourself Kits (DIY) with the modules at best price along with free shipping.
VOICE OPERATED WHEELCHAIR
This document describes a project to build a voice-operated wheelchair for physically disabled persons. The objective is to design hardware for voice recognition and corresponding wheelchair actions. Group members include Mandar Jadhav, Mayuresh Todkar and Dayanand Patil, guided by Dr. V. Jayashree. The system is aimed to help those paralyzed below the neck or with quadriplegia. It will allow independent wheelchair movement through voice commands without need for personal assistance. The design uses a microphone, voice recognition IC, microcontroller, motor drivers and batteries to power DC motors for forward, reverse, left and right wheelchair movement.
Green Internet of things for Smart World
Green internet of things for smart world provides you overview regarding the topic.Technology utilizes the resources but it should be ecofriendly.
Digital clock
The presentation introduces digital clocks, including their history, components, implementation, uses, and future plans. It discusses how the first digital watches were invented in the 1880s and the first digital alarm clock was patented in 1956. The presentation implements a digital clock circuit in Multisim using ICs like 74LS47, 74LS90, 74HC32, and other components like function generators, push buttons, and 7-segment displays. Digital clocks are now commonly used in devices like cars, radios, TVs, and computers to display time accurately and easily readably compared to analog clocks. Future plans include adding time setting, on/off, date, and alarm functions.
Smart card
This is a compiled ppt of various ppt on the internet. Not my original work. Done for people who need ready refeerence
IRJET- Design and Development of Underground Cable Fault Detection and Locali...
The document describes a system to detect and localize faults in underground cables using IoT. It can detect both open and short circuit faults. For open circuits, it measures the cable's capacitance, which varies linearly with the length of the fault. For short circuits, it measures the cable's inductance, which also varies linearly with the fault length. A microcontroller processes the capacitance and inductance measurements and displays the fault location on an LCD and webpage. This allows easy, low-cost detection and localization of underground cable faults.
RFID BASED ATTENDANCE SYSTEM PPT
This document describes an RFID-based attendance system. It includes a block diagram of the system which uses an RFID reader module connected to a PIC microcontroller and LCD display powered by a power supply. The system works by detecting an RFID card within 10cm, checking the card information against a database, and increasing the attendance count for that student and storing it in the database if it matches. The system aims to automate attendance tracking in educational institutions for ease of use and data analysis.
anti sleep alarm for students
This document provides an overview of an anti-sleep alarm circuit project. It includes a circuit diagram, descriptions of the main components used including an IC555 timer, relay, push button switch, buzzer, resistor, capacitor, transistor and diode. It describes the power supply, including the transformer, rectifier and filter. It explains how the circuit operates to sound an alarm after a set time interval if the push button is not pressed. The conclusion states that the circuit can be used to automatically switch home appliances on and off to save time and electricity.
Automatic speed controller in real time vehicles.
One third of the number of fatal or serious accidents are associated with excessive or inappropriate speed, as well as changes in the roadway. So to overcome this problem we are introducing a automatic speed controller in vehicles at schools, hospitals and danger zones. In this zones, the vehicles are not possible to move above the predefined speed limit. It is basically a Mechatronics system. Ie it is a combination of both mechanical and electronics system.
Presentation on Green IoT
This document presents a proposal for Green Internet of Things (IoT) to enable a smart and sustainable future world. It discusses how Green IoT aims to reduce energy consumption and greenhouse gas emissions through energy efficient design, production, utilization and disposal of IoT devices and systems. Key enabling technologies for Green IoT include green RFID, wireless sensor networks, computer clouding, machine-to-machine communication and green data centers. Design principles for Green IoT focus on minimizing energy usage through approaches like predictive data delivery, optimized routing, trading off processing for communication, using renewable energy sources, and developing advanced sensor cloud architectures. Future research directions include modeling energy consumption and investigating more energy efficient system structures to realize a smart world powered by
IoT Based Garbage Monitoring System ppt
1) A group of students presented on an IOT Garbage Monitoring System to help keep cities clean.
2) The system uses ultrasonic sensors and a microcontroller to monitor garbage levels in bins and displays the status on an LCD screen and web page.
3) When fully implemented, the system will help support initiatives like Swachh Bharat Mission by enabling real-time garbage monitoring and efficient collection.
Automated teller machine
An embedded system is defined as a device that contains a programmable computer but is not intended as a general purpose computer. Embedded systems have a microprocessor or microcontroller as their core component and are used in devices like ATMs, camcorders, fax machines, televisions, cruise missiles, home security systems, and standby generators. An ATM is an automated teller machine that allows customers of a bank access to financial transactions without a human clerk by providing 24-hour access to cash, account balances, cheque books, bill payments, account statements, and pin changes.
HEART ATTACK DETECTION SYSTEM
Nowadays numerous persons are mislaying their life owing to heart attack and shortage of medical attention to patient at correct stage.We all know heart attack can kill your life in 3 attempts but now days it can be dangerous in first attempt also. If checking our health regularly on daily basis then we can detect so many different diseases by detecting them previously, Life is precious. Many people among us lose their life to heart attack. Heart attack is not easy to detect, To overcome and help our society from heart diseases and attack, we are developing such a system which will help to decrease the death rate and early detection a heart attack. Hence, in this project we are implementing heart rate monitoring and heart attack recognition system . The sensor is then interfaced to a micro-controller that allows checking heart rate readings and transmitting them over Internet. The user may set the high as well as low level of heart beat limit. Once these limits are set the system can start monitoring the patient’s heartbeat and as soon as the heart beat readings goes above or below the limit set by the user the system will send an alert about high or low heartbeat as well about chances of heart attack . For this the system uses two circuits. One is the transmitting circuit which is with the patient and the other is the receiver circuit which is being supervised by the doctor or nurse. The system makes use of heart beat sensor to find out the current heart beat level and display it on the LCD screen.
Automation of shopping cart to ease queue in malls by using RFID
RFID technology is proposed to automate the shopping cart and billing process in malls. The current barcode system requires line of sight scanning and is slow. The proposed system uses RFID tags embedded in products that can be automatically read by an RFID reader in the cart from a distance. As shoppers add items to their cart, the tags are read and the items and running total are displayed. This allows for a more efficient checkout where the total is already known without additional scanning. The system architecture uses an RFID reader, microcontroller, Zigbee for wireless communication, and an LCD for display. Benefits include simplified billing, increased speed, and an improved overall shopping experience.
Smart Vehicle using IoT
This document proposes a smart vehicle security system using IoT that allows users to remotely monitor and control their vehicles via a mobile app. It cites statistics on vehicle theft in India to motivate the need for such a system. The system would use sensors and cameras on the vehicle to detect motion and stream live video to authenticated users. It provides an overview of the hardware, software, and mobile app design, including features like geofencing, remote locking/unlocking, and notification of abnormal activity. Future work is mentioned to incorporate machine learning and blockchain technology.
OBSTACLE AVOIDING CAR
This document describes an obstacle avoiding car project created by Utkarsh Bingewar, Shubham Thakur, and Rupesh Rote, with guidance from their assistant professor Mrs. Varsha Nanaware. The car uses an ultrasonic sensor and Arduino board to detect obstacles and navigate around them. When an obstacle is detected, the Arduino controls the motors to turn the car left or right to avoid the obstacle. The obstacle avoiding car has applications in areas like surveillance, hazardous environments, and unmanned vehicle navigation.
Smart shopping cart (using RFID)
This document describes a student project to develop a smart shopping cart that improves the shopping experience. The cart will scan RFID tags on products to show prices and a running total on a display. When the user is ready to check out, their total bill will already be calculated. The system will use an Arduino microcontroller, RFID reader, WiFi module, and display. It will connect to a backend server using a wireless network. The project aims to be completed by May 20th according to the provided timeline and budget.
Industry 4.0 PPT PDF for Smart Manufacturing using IIoT (Industrial IoT i.e. ...
Industry 4.0 PPT PDF for Smart Manufacturing using IIoT (Industrial IoT i.e. ...Enerco Energy Solutions LLP
Industry 4.0 has widespread application across Industries (Manufacturing, Logistics, Mobility etc.). In case of manufacturing and processing industries Industry 4.0 means Smart Manufacturing using IIoT (Industrial Internet of Things or simply Industrial IoT) in a connected smart factory.
It enables an Organization to make smart data-driven decisions based on Big Data, Artificial Intelligence and Machine Learning. Industry 4.0 IIoT has several benefits such as Resource Optimization, Cost Reduction, Automation, Predictive Maintenance and Prescriptive Analytics and Control etc.SMART CAR-PARKING SYSTEM USING IOT
The document describes a smart car parking system using IoT. The system uses sensors like IR sensors and a wifi module connected to an Arduino board to detect available parking spots. This information is sent to a mobile app to guide drivers to empty spots, reducing congestion and emissions. The system's advantages include shorter wait times, fuel savings, and directing users to open spaces. It has applications in malls, restaurants, and theaters to more efficiently manage parking.
Biochips seminar report
The document summarizes the advantages and disadvantages of biochip technology. The key advantages are that biochips allow for detection of multiple viral agents in parallel, clarification of unknown diseases, increased diagnosis speed, viral typing, and epidemiological tracing. However, the disadvantages are that early biochip fabrication methods had limitations in achieving high density and mass production.
Abstract Smart Card Technology
This document discusses smart card technology, focusing on key characteristics like portability, security, open platforms, and memory management. It provides historical context on the development of smart cards and their growing market. The document examines memory management challenges with smart cards and potential solutions. It also compares smart cards to biometric identification and addresses security issues with smart card applications.
SMART CARD
Smart cards are plastic cards with embedded microchips that can store data and enable phone calls, payments, and other applications. The technology originated in the 1970s and has since been used for pay phones, debit/credit cards, SIM cards, transit cards, and more. There are several types of smart cards including contact cards that require insertion, contactless cards that use embedded antennas, and dual/hybrid cards with both contact and contactless capabilities. Smart cards are used across many industries like retail, transportation, healthcare, banking, and more. Future applications may incorporate biometrics and enable online purchases directly from smart cards.
Final ppt
1. The project aims to develop a smart ride system using sensors, mobile apps and cloud servers to provide real-time traffic monitoring and make roads safer.
2. The system will use infrared sensors to detect traffic density and blind spots, notify drivers of ambulances via mobile apps, and update information to a cloud server.
3. The hardware includes Arduino, WiFi modules, infrared sensors and the software includes apps, databases and programming for the system integration.
PASSWORD PROTECTED DOOR OPENING SYSTEM BY HEMANTA
This is the most convenient way for security in Door. In this system only by giving the correct password the door will be open otherwise not.
More Related Content
What's hot
Green Internet of things for Smart World
Green internet of things for smart world provides you overview regarding the topic.Technology utilizes the resources but it should be ecofriendly.
Digital clock
The presentation introduces digital clocks, including their history, components, implementation, uses, and future plans. It discusses how the first digital watches were invented in the 1880s and the first digital alarm clock was patented in 1956. The presentation implements a digital clock circuit in Multisim using ICs like 74LS47, 74LS90, 74HC32, and other components like function generators, push buttons, and 7-segment displays. Digital clocks are now commonly used in devices like cars, radios, TVs, and computers to display time accurately and easily readably compared to analog clocks. Future plans include adding time setting, on/off, date, and alarm functions.
Smart card
This is a compiled ppt of various ppt on the internet. Not my original work. Done for people who need ready refeerence
IRJET- Design and Development of Underground Cable Fault Detection and Locali...
The document describes a system to detect and localize faults in underground cables using IoT. It can detect both open and short circuit faults. For open circuits, it measures the cable's capacitance, which varies linearly with the length of the fault. For short circuits, it measures the cable's inductance, which also varies linearly with the fault length. A microcontroller processes the capacitance and inductance measurements and displays the fault location on an LCD and webpage. This allows easy, low-cost detection and localization of underground cable faults.
RFID BASED ATTENDANCE SYSTEM PPT
This document describes an RFID-based attendance system. It includes a block diagram of the system which uses an RFID reader module connected to a PIC microcontroller and LCD display powered by a power supply. The system works by detecting an RFID card within 10cm, checking the card information against a database, and increasing the attendance count for that student and storing it in the database if it matches. The system aims to automate attendance tracking in educational institutions for ease of use and data analysis.
anti sleep alarm for students
This document provides an overview of an anti-sleep alarm circuit project. It includes a circuit diagram, descriptions of the main components used including an IC555 timer, relay, push button switch, buzzer, resistor, capacitor, transistor and diode. It describes the power supply, including the transformer, rectifier and filter. It explains how the circuit operates to sound an alarm after a set time interval if the push button is not pressed. The conclusion states that the circuit can be used to automatically switch home appliances on and off to save time and electricity.
Automatic speed controller in real time vehicles.
One third of the number of fatal or serious accidents are associated with excessive or inappropriate speed, as well as changes in the roadway. So to overcome this problem we are introducing a automatic speed controller in vehicles at schools, hospitals and danger zones. In this zones, the vehicles are not possible to move above the predefined speed limit. It is basically a Mechatronics system. Ie it is a combination of both mechanical and electronics system.
Presentation on Green IoT
This document presents a proposal for Green Internet of Things (IoT) to enable a smart and sustainable future world. It discusses how Green IoT aims to reduce energy consumption and greenhouse gas emissions through energy efficient design, production, utilization and disposal of IoT devices and systems. Key enabling technologies for Green IoT include green RFID, wireless sensor networks, computer clouding, machine-to-machine communication and green data centers. Design principles for Green IoT focus on minimizing energy usage through approaches like predictive data delivery, optimized routing, trading off processing for communication, using renewable energy sources, and developing advanced sensor cloud architectures. Future research directions include modeling energy consumption and investigating more energy efficient system structures to realize a smart world powered by
IoT Based Garbage Monitoring System ppt
1) A group of students presented on an IOT Garbage Monitoring System to help keep cities clean.
2) The system uses ultrasonic sensors and a microcontroller to monitor garbage levels in bins and displays the status on an LCD screen and web page.
3) When fully implemented, the system will help support initiatives like Swachh Bharat Mission by enabling real-time garbage monitoring and efficient collection.
Automated teller machine
An embedded system is defined as a device that contains a programmable computer but is not intended as a general purpose computer. Embedded systems have a microprocessor or microcontroller as their core component and are used in devices like ATMs, camcorders, fax machines, televisions, cruise missiles, home security systems, and standby generators. An ATM is an automated teller machine that allows customers of a bank access to financial transactions without a human clerk by providing 24-hour access to cash, account balances, cheque books, bill payments, account statements, and pin changes.
HEART ATTACK DETECTION SYSTEM
Nowadays numerous persons are mislaying their life owing to heart attack and shortage of medical attention to patient at correct stage.We all know heart attack can kill your life in 3 attempts but now days it can be dangerous in first attempt also. If checking our health regularly on daily basis then we can detect so many different diseases by detecting them previously, Life is precious. Many people among us lose their life to heart attack. Heart attack is not easy to detect, To overcome and help our society from heart diseases and attack, we are developing such a system which will help to decrease the death rate and early detection a heart attack. Hence, in this project we are implementing heart rate monitoring and heart attack recognition system . The sensor is then interfaced to a micro-controller that allows checking heart rate readings and transmitting them over Internet. The user may set the high as well as low level of heart beat limit. Once these limits are set the system can start monitoring the patient’s heartbeat and as soon as the heart beat readings goes above or below the limit set by the user the system will send an alert about high or low heartbeat as well about chances of heart attack . For this the system uses two circuits. One is the transmitting circuit which is with the patient and the other is the receiver circuit which is being supervised by the doctor or nurse. The system makes use of heart beat sensor to find out the current heart beat level and display it on the LCD screen.
Automation of shopping cart to ease queue in malls by using RFID
RFID technology is proposed to automate the shopping cart and billing process in malls. The current barcode system requires line of sight scanning and is slow. The proposed system uses RFID tags embedded in products that can be automatically read by an RFID reader in the cart from a distance. As shoppers add items to their cart, the tags are read and the items and running total are displayed. This allows for a more efficient checkout where the total is already known without additional scanning. The system architecture uses an RFID reader, microcontroller, Zigbee for wireless communication, and an LCD for display. Benefits include simplified billing, increased speed, and an improved overall shopping experience.
Smart Vehicle using IoT
This document proposes a smart vehicle security system using IoT that allows users to remotely monitor and control their vehicles via a mobile app. It cites statistics on vehicle theft in India to motivate the need for such a system. The system would use sensors and cameras on the vehicle to detect motion and stream live video to authenticated users. It provides an overview of the hardware, software, and mobile app design, including features like geofencing, remote locking/unlocking, and notification of abnormal activity. Future work is mentioned to incorporate machine learning and blockchain technology.
OBSTACLE AVOIDING CAR
This document describes an obstacle avoiding car project created by Utkarsh Bingewar, Shubham Thakur, and Rupesh Rote, with guidance from their assistant professor Mrs. Varsha Nanaware. The car uses an ultrasonic sensor and Arduino board to detect obstacles and navigate around them. When an obstacle is detected, the Arduino controls the motors to turn the car left or right to avoid the obstacle. The obstacle avoiding car has applications in areas like surveillance, hazardous environments, and unmanned vehicle navigation.
Smart shopping cart (using RFID)
This document describes a student project to develop a smart shopping cart that improves the shopping experience. The cart will scan RFID tags on products to show prices and a running total on a display. When the user is ready to check out, their total bill will already be calculated. The system will use an Arduino microcontroller, RFID reader, WiFi module, and display. It will connect to a backend server using a wireless network. The project aims to be completed by May 20th according to the provided timeline and budget.
Industry 4.0 PPT PDF for Smart Manufacturing using IIoT (Industrial IoT i.e. ...
Industry 4.0 PPT PDF for Smart Manufacturing using IIoT (Industrial IoT i.e. ...Enerco Energy Solutions LLP
Industry 4.0 has widespread application across Industries (Manufacturing, Logistics, Mobility etc.). In case of manufacturing and processing industries Industry 4.0 means Smart Manufacturing using IIoT (Industrial Internet of Things or simply Industrial IoT) in a connected smart factory.
It enables an Organization to make smart data-driven decisions based on Big Data, Artificial Intelligence and Machine Learning. Industry 4.0 IIoT has several benefits such as Resource Optimization, Cost Reduction, Automation, Predictive Maintenance and Prescriptive Analytics and Control etc.SMART CAR-PARKING SYSTEM USING IOT
The document describes a smart car parking system using IoT. The system uses sensors like IR sensors and a wifi module connected to an Arduino board to detect available parking spots. This information is sent to a mobile app to guide drivers to empty spots, reducing congestion and emissions. The system's advantages include shorter wait times, fuel savings, and directing users to open spaces. It has applications in malls, restaurants, and theaters to more efficiently manage parking.
Biochips seminar report
The document summarizes the advantages and disadvantages of biochip technology. The key advantages are that biochips allow for detection of multiple viral agents in parallel, clarification of unknown diseases, increased diagnosis speed, viral typing, and epidemiological tracing. However, the disadvantages are that early biochip fabrication methods had limitations in achieving high density and mass production.
Abstract Smart Card Technology
This document discusses smart card technology, focusing on key characteristics like portability, security, open platforms, and memory management. It provides historical context on the development of smart cards and their growing market. The document examines memory management challenges with smart cards and potential solutions. It also compares smart cards to biometric identification and addresses security issues with smart card applications.
SMART CARD
Smart cards are plastic cards with embedded microchips that can store data and enable phone calls, payments, and other applications. The technology originated in the 1970s and has since been used for pay phones, debit/credit cards, SIM cards, transit cards, and more. There are several types of smart cards including contact cards that require insertion, contactless cards that use embedded antennas, and dual/hybrid cards with both contact and contactless capabilities. Smart cards are used across many industries like retail, transportation, healthcare, banking, and more. Future applications may incorporate biometrics and enable online purchases directly from smart cards.
What's hot (20)
IRJET- Design and Development of Underground Cable Fault Detection and Locali...
IRJET- Design and Development of Underground Cable Fault Detection and Locali...
Automation of shopping cart to ease queue in malls by using RFID
Automation of shopping cart to ease queue in malls by using RFID
Industry 4.0 PPT PDF for Smart Manufacturing using IIoT (Industrial IoT i.e. ...
Industry 4.0 PPT PDF for Smart Manufacturing using IIoT (Industrial IoT i.e. ...
Similar to Trolly ppt
Final ppt
1. The project aims to develop a smart ride system using sensors, mobile apps and cloud servers to provide real-time traffic monitoring and make roads safer.
2. The system will use infrared sensors to detect traffic density and blind spots, notify drivers of ambulances via mobile apps, and update information to a cloud server.
3. The hardware includes Arduino, WiFi modules, infrared sensors and the software includes apps, databases and programming for the system integration.
PASSWORD PROTECTED DOOR OPENING SYSTEM BY HEMANTA
This is the most convenient way for security in Door. In this system only by giving the correct password the door will be open otherwise not.
Main project report on GSM BASED WIRELESS NOTICE BOARD
This document is the main project report submitted by four students for their Bachelor of Technology degree in Electronics and Communication Engineering. It describes the development of a GSM based wireless notice board system. The system allows users to update scrolling messages on an LED display board remotely by sending SMS text messages. It aims to provide a more flexible alternative to traditional fixed notice boards by enabling instantaneous message updates from anywhere via the mobile phone SMS service. The report includes chapters on the hardware components, software requirements, schematic diagram, program code, advantages and applications of the project.
COLLISION AVOIDANCE SYSTEM
1) The document describes a collision avoidance system for autonomous vehicles that uses a Raspberry Pi, ultrasonic sensor, camera, GPS module, LCD display, and motor driver.
2) The system is able to detect objects using the ultrasonic sensor and camera, determine the distance to objects using vision processing techniques on images from the camera, and control the vehicle's motors using the motor driver to avoid collisions based on object distances.
3) Experimental results showed the system successfully detecting obstacles, measuring distances, and simulating avoidance maneuvers in response to obstacles getting too close. The goal is to reduce accidents caused by human errors by allowing vehicles to autonomously sense and avoid collisions.
SIMPLIFIED SECURED WIRELESS RAILWAY / AIRWAY FOR RESERVATION
This document discusses embedded systems and describes them as a combination of computer hardware and software designed to perform a specific function within a larger system. It notes that while general-purpose computers can perform many different tasks, embedded systems are designed for a dedicated purpose like controlling anti-lock brakes in a vehicle. Real-time embedded systems must also meet precise timing requirements to ensure functions are performed within required time constraints.
IRJET- A Paper on IoT based Digital Notice Board using Arduino ATMega 328
1. The document describes an IOT-based digital notice board system using an Arduino microcontroller that can display notices and announcements via a LED display board.
2. The system consists of an Arduino board connected to a GSM module to receive text messages. When a message is received, the Arduino sends it to control the LED display board. This allows notices to be sent remotely via text and displayed wirelessly.
3. The system aims to provide a low-cost electronic notice board that allows quick dissemination of notices without delays. Notices can be sent from anywhere via the mobile network connected GSM module and displayed immediately on the LED board.
Applying M2M/IoT technology to enable Business Efficiency
This document discusses machine-to-machine (M2M) technology and its applications in Asia. It provides an overview of the M2M landscape in Asia Pacific, defines M2M, discusses an end-customer centric approach to growing M2M, outlines the M2M value chain, and provides case studies of M2M applications in Singapore including structural health monitoring of tunnels and a real-time water monitoring system. The document emphasizes adopting an operations expenditure business model to improve customer service levels and discusses the importance of reliability across the entire M2M ecosystem.
Webinar Presentation- Typical Challenges Faced by Tier 1s in AUTOSAR Tooling
Check out this presentation of webinar conducted on Typical Challenges Faced by Tier 1s in AUTOSAR Tooling.
BLUETOOTH CONTROLLED ROBOCAR
A robot is usually an electro-mechanical machine that is guided by computer and electronic programming. Many robots have been built for manufacturing purpose and can be found in factories around the world. Designing of the latest inverted ROBOT which can be controlling using an APP for android mobile. We are developing the remote buttons in the android app by which we can control the robot motion with them. A smart phone Android operated robot car. Now here is a simple to control our robo car using Bluetooth module HC-05 and AT89S52 microcontroller with our android Smartphone device. The controlling devices of the whole system are a microcontroller. Bluetooth module, DC motors are interfaced to the microcontroller. . The robot in the project can be made to move in all the four directions using the android phone. In achieving the task the controller is loaded with program written using Embedded ‘C’ Languages. Android smart phone controller Bluetooth robot using microcontroller. In our work, move the robot upward, backward, left and right side by the android application such as Bluetooth Controlled Car.
Part 1 master
This document describes the design and implementation of an obstacle avoiding robot. It includes sections on the required components of the robot such as a microcontroller, Bluetooth module, motor driver, capacitors, resistors, DC motors, and more. A block diagram shows the overall system design. Code is written for the microcontroller to control the motors based on input from a Bluetooth connected smartphone. An Android app is developed to allow wireless control of the robot from a phone. The robot is designed to detect and avoid obstacles using sensors and motor control from the microcontroller.
Automatic car parking system (1).pptx
This document presents a design for an automatic car parking system using a microcontroller. The system uses infrared sensors, a stepper motor, LCD display, and other hardware to detect vehicles and automatically guide them into available parking spaces. When a vehicle arrives, the IR sensors detect it and the microcontroller checks for empty spaces. If available, it opens the gate using the stepper motor and guides the vehicle in while updating the space availability on the LCD display. The system aims to make parking more efficient, reduce congestion, and provide real-time space information to users.
Automatic car parking system (1).pptx
This document presents a design for an automatic car parking system using a microcontroller. The system uses infrared sensors, a stepper motor, LCD display, and other hardware to detect vehicles and automatically guide them into available parking spaces. When a vehicle arrives, the IR sensors detect it and the microcontroller checks for empty spaces. If available, it opens the gate using the stepper motor and guides the vehicle in while updating the space availability on the LCD display. The system aims to make parking more efficient, reduce congestion, and provide real-time space information to users.
final report
This document describes a project report on the measurement, protection, and graphical observation of a DC motor using an ATmega-16 microcontroller. The project was completed by three students to fulfill the requirements for a Bachelor of Technology degree. The project involved designing a circuit to measure voltage, current, speed, and torque of a DC motor. The measured values were displayed on a 16x4 LCD and two graphs were plotted on a 128x64 graphical LCD showing the N-I characteristics curve of the motor and a voltage vs. time graph. The circuit provided protection by stopping the motor if parameter values exceeded set limits. The overall goal was to control and observe the DC motor's parameters using a low-cost, portable embedded system.
Rain Sensor Automatically Controlled Drying Shed for Crop Yield Farmers
1. The document describes a proposed automatic rain-protected drying shed system for farmers that uses a rain sensor, microcontroller, and DC motor.
2. When the rain sensor detects rain, it sends a signal to the microcontroller which activates the DC motor to wrap a protective covering around the roof of the drying shed, shielding crops from rain and moisture.
3. The system aims to prevent crop destruction and degradation that can occur when rained on before sale, protecting farmers' yields and livelihoods.
Part 1 master
This document describes the design and implementation of an obstacle avoiding robot. It includes sections on the required components of the robot such as a microcontroller, Bluetooth module, motor driver, sensors, wheels, and power supply. The microcontroller is programmed to receive Bluetooth commands from a smartphone and control the motor driver and wheels to navigate around obstacles. Circuit diagrams and screenshots of an Android application for controlling the robot are provided. The robot was designed and built by three electrical engineering students for their undergraduate project.
project presentation template on IOT agriculture
The document summarizes a mini-project proposal for an IoT-based monitoring system in smart agriculture. It discusses implementing sensors to monitor soil moisture, temperature, and humidity to automate irrigation. It proposes adding security features like theft detection and temperature/humidity control in storage. The system will use an Arduino, sensors, and WiFi to control pumps, lights, fans, and heaters. It provides block diagrams, circuit diagrams, and discusses the pros and cons as well as references for the project. The goal is to optimize water usage, increase productivity, and provide monitoring where human presence is not possible.
Eye blink sensing
This document describes a vehicle accident prevention system using an eye blink sensor. The system uses an infrared sensor to detect a driver's eye blinks and a microcontroller to process the sensor data. If no eye blinks are detected for a certain period, indicating potential drowsiness, the system will stop the vehicle and trigger an alarm. The system has a transmitter to send eye blink data via RF to a receiver unit in the vehicle which controls the motor and display. The goal is to reduce accidents caused by driver drowsiness or lack of attention.
AUTOMATED PETROL PUMP USING RFID TECHNOLOGY
This document describes an automated petrol pump system that uses RFID technology for contactless payments. A smart card with an embedded RFID tag is issued to customers, which they can scan at the pump to pay for fuel without cash. The system aims to reduce human errors in transactions and fuel theft. It discusses the system components like the RFID reader, microcontroller, keypad, LCD display and relays. The system works by scanning the customer's RFID card, checking if it has sufficient balance, prompting for fuel selection, and then dispensing the petrol amount before updating the card balance.
Flow Thinking @ Ericsson 3G
How we made the journey from flow in our complex products to flow thinking for our processes. Ericsson is number 1 in mobile infrastructure thanks to our ability to innovate around state-of-the art algorithms for optimizing packet data flow. We made a mental leap when we realized that all this is also applicable for flow through our processes.
Resume-Prashanth
Prashanth Moorthy is seeking a position that utilizes his 13 years of experience in instrumentation and control engineering. He has extensive technical skills in designing control systems, including PLC and SCADA selection. He has worked on numerous projects in industries such as desalination, manufacturing, and water treatment. His experience ranges from design and engineering to project management and commissioning.
Similar to Trolly ppt (20)
Main project report on GSM BASED WIRELESS NOTICE BOARD
Main project report on GSM BASED WIRELESS NOTICE BOARD
SIMPLIFIED SECURED WIRELESS RAILWAY / AIRWAY FOR RESERVATION
SIMPLIFIED SECURED WIRELESS RAILWAY / AIRWAY FOR RESERVATION
IRJET- A Paper on IoT based Digital Notice Board using Arduino ATMega 328
IRJET- A Paper on IoT based Digital Notice Board using Arduino ATMega 328
Applying M2M/IoT technology to enable Business Efficiency
Applying M2M/IoT technology to enable Business Efficiency
Webinar Presentation- Typical Challenges Faced by Tier 1s in AUTOSAR Tooling
Webinar Presentation- Typical Challenges Faced by Tier 1s in AUTOSAR Tooling
Rain Sensor Automatically Controlled Drying Shed for Crop Yield Farmers
Rain Sensor Automatically Controlled Drying Shed for Crop Yield Farmers
Trolly ppt
- 1. SMART CART TROLLEY FOR AUTOMATIC SHOP BILLING AND LIBRARY MANAGEMENT USING WIRELESS NETWORKS 2/9/2015 1
- 5. BLOCK DIAGRAM 2/9/2015 5 PIC MICRO CONTROLLER Power supply Smart card Reader BARCODE READER EEPROM BUZZER LCD Display MAX 232
- 7. HARDWARE COMPONENTS • Power Supply • Microcontroller • RFID Reader • LCD • SMART CARD • EEPROM • BUZZER 2/9/2015 7
- 8. SOFTWARE USED • Keil μvision3 • Express PCB • Express SCH 2/9/2015 8
- 9. CONCLUSION • As the system is it completely automated,it avoids manual errors and thus provides ultimate safety to the people. 2/9/2015 9