3. BROADEN YOUR FUTURE
www.fiberhomegroup.com
Client
3
Client, is a program
that provides local
services to customers
corresponding to the
server. With the
exception of locally
running applications,
which are typically
installed on a regular
local PC and need to
work with the server.
4. BROADEN YOUR FUTURE
www.fiberhomegroup.com
LCT
4
Orientation:The LCT is a
member of Fiberhome network
management system family.It is
designed in complince with the OSI
standard issued by ISO.In the
TMN(Telecommunication
Management Network)model,it is in
the NEL(Network Element Layer)
Application Scenarios:Support
handling emergency maintenance
tasks on the existing network when
the equipment is offline or
inconvenient to login on the EMS
client. Helps monitor and identify
problems by querying alarms,
performance, equipment
configuration and other information.
5. BROADEN YOUR FUTURE
www.fiberhomegroup.com
Difference between Client and LCT
5
OTNM2000 Client:The subnet-level element management system that
supports complete configuration,performance,alarm security,and service
management function.It is used to configure and monitor the NEs in the
network topology.
LCT:The local craft terminal that supports basic performance,alarm and other
management functions.It is used for maintenance and commissioning of the
local equipment,and serves as a supplementary measure for the
OTNM2000's monitoring of the equipment.
7. BROADEN YOUR FUTURE
www.fiberhomegroup.com
User Authority
7
ADMIN: Full authority of OTNM2000,all OTNM2000 function can be used
by ADMIN user account
MONITOR:Partly authority of OTNM2000,only Performance and Alarm Check
can be used by MONITOR user account;user account in this group
only can check alarm,performance
OTNM2000 offers different kinds of user authority,mainly ADMIN and MONITOR authority
9. BROADEN YOUR FUTURE
www.fiberhomegroup.com
1Point to Point Service(E-Line）
2 Point to Multi Point Service(E-Tree)
3 Multi Point to Multi Point Service(E-Lan)
4 CES Service
5 610 Service Configuration
10. BROADEN YOUR FUTURE
www.fiberhomegroup.com
Point to Point Service
Configuration Overview
Steps Overview:-
1. UNI Port Configuration
2. Tunnel Configuration
3. PW Configuration
4. L2VPN Configuration
5. Deliver Service
11. BROADEN YOUR FUTURE
www.fiberhomegroup.com
Point to Point Service
UNI Port Configuration
2. Unfold IPRAN Ne Config, choose Eth
Interface
3. Click Add and add Main Eth-Interface
1. Right Click on the NE, choose the NE
Config
12. BROADEN YOUR FUTURE
www.fiberhomegroup.com
Point to Point Service
UNI Port Configuration
5. Click Ethernet property, UNI port mode
should be L2, Then Right click and
deliver it.
4. Choose the UNI Port (0/2/0/8) on
both side and add it;
13. BROADEN YOUR FUTURE
www.fiberhomegroup.com
Point to Point Service
Tunnel Configuration
1. Choose Business Configuration,
and add tunnel
2. Input the Path Name, Protection is
1:1 Trail Protection, then click Next
14. BROADEN YOUR FUTURE
www.fiberhomegroup.com
Point to Point Service
Tunnel Configuration
1. Choose Business Configuration,
and add tunnel
2. Input the Path Name, Protection is
1:1 Trail Protection, then click Next
15. BROADEN YOUR FUTURE
www.fiberhomegroup.com
Point to Point Service
Tunnel Configuration
3. Source is 1-2, and Sink is 1-1,
label will be allocated by FH Staff,
then click Next
4. Click Next till finish, the path will be chosen automatically
16. BROADEN YOUR FUTURE
www.fiberhomegroup.com
Point to Point Service
PW Configuration
1. Right on the Tunnel just created, choose Add PW
2. PW Label should be set as 1005 as
Tunnel label is started from 1001, Click
Next till finish
20. BROADEN YOUR FUTURE
www.fiberhomegroup.com
1 Point to Point Service (E-Line)
2Point to Multi Point Service (E-Tree)
3 Multi Point to Multi Point Service(E-Lan)
4 CES Service
5 610 Service Configuration
21. BROADEN YOUR FUTURE
www.fiberhomegroup.com
Point to Multi Point Service
Configuration Overview
Steps Overview:-
1. UNI Port Configuration
2. Tunnel Configuration
3. PW Configuration
4. L2VPN Configuration
5. Deliver Service
The Green Steps are same as E-
Line Services
Attention:
There are 2 tunnels and 2 pws, one is
from 1-1 to 1-2, another one is from 1-1 to
1-3
22. BROADEN YOUR FUTURE
www.fiberhomegroup.com
Point to Multi Point Service
L2VPN Configuration
1. Click Business Configuration, And find
the L2VPN Service.
2. Typing the Service name and Service type.
23. BROADEN YOUR FUTURE
www.fiberhomegroup.com
Point to Multi Point Service
L2VPN Configuration
3. The first blue one is root point, others are leaf
point
4. Binding the PWs from 1-1 to 1-2 and 1-3, Click
Next till finish
25. BROADEN YOUR FUTURE
www.fiberhomegroup.com
1 Point to Point Service (E-Line)
3Multi Point to Multi Point Service(E-Lan)
4 CES Service
2 Point to Multi Point Service (E-Tree)
5 610 Service Configuration
26. BROADEN YOUR FUTURE
www.fiberhomegroup.com
Multi Point to Multi Point Service
Configuration Overview
Steps Overview:-
1. UNI Port Configuration
2. Tunnel Configuration
3. PW Configuration
4. L2VPN Configuration
5. Deliver Service
The Green Steps are same as E-
Line Services
Attention:
There are 3 tunnels and 3 pws, one is from 1-1
to 1-2, one is from 1-1 to 1-3, one is from 1-2 to
1-3
27. BROADEN YOUR FUTURE
www.fiberhomegroup.com
Multi Point to Multi Point Service
L2VPN Configuration
1. Click Business Configuration, And find
the L2VPN Service.
2. Typing the Service name and Service type.
30. BROADEN YOUR FUTURE
www.fiberhomegroup.com
1 Point to Point Service (E-Line)
4CES Service
2 Point to Multi Point Service (E-Tree)
3 Multi Point to Multi Point Service (E-Lan)
5 610 Service Configuration
31. BROADEN YOUR FUTURE
www.fiberhomegroup.com
CES Service
Configuration Overview
Steps Overview:-
1. Simulation Interface
Configuration
2. Tunnel Configuration
3. PW Configuration
4. L2VPN Configuration
5. Deliver Service
The Green Steps are same as E-
Line Services
32. BROADEN YOUR FUTURE
www.fiberhomegroup.com
CES Service
Simulation Interface Configuration
2. Unfold IPRAN Ne Config, choose
Simulation Interface Logical
3. Right click in the blank area, choose Add.
1. Right Click on the NE, choose the NE
Config
33. BROADEN YOUR FUTURE
www.fiberhomegroup.com
CES Service
Simulation Interface Configuration
4. Choose the STM port, then choose
Select
4. VC Type should be VC12, Choose the time slot,
then add the interface
35. BROADEN YOUR FUTURE
www.fiberhomegroup.com
CES Service
L2VPN Configuration
1. Right click on the PW,
then add CES Service
2. The configuration is shown in the
picture, click Next till finish
37. BROADEN YOUR FUTURE
www.fiberhomegroup.com
1 Point to Point Service (E-Line)
5610 Service Configuration
2 Point to Multi Point Service (E-Tree)
3 Multi Point to Multi Point Service (E-Lan)
4 CES Service
38. BROADEN YOUR FUTURE
www.fiberhomegroup.com
610 Service
Configuration Overview
Steps Overview:-
1. UNI Port Configuration
2. Tunnel Configuration
3. PW Configuration
4. L2VPN Configuration
5. Deliver Service
Attention:
For 610 Service, Only UNI Port
and Tunnel Configuration are
different;
39. BROADEN YOUR FUTURE
www.fiberhomegroup.com
610 Service
UNI Port Confgiuration
1. Choose Business
Confgiuration, and Service
Global Settings, then choose
SDHPAN NE Global Setting
2. Change the GE1 from NNI to UNI.
42. BROADEN YOUR FUTURE
www.fiberhomegroup.com
Alarm Check
42
Port Alarm Check:
1、double click on
NE,and choose the
slot you want to
check
2、click port
info,and choose the
port you want to
check
3、right click on the
port,choose the
Current Alarm,and
the port alarm will be
shown on the top
43. BROADEN YOUR FUTURE
www.fiberhomegroup.com
Alarm Check
43
Board Alarm Check:
1、double click on
NE,and choose the
slot you want to
check
2、click the slot,and
there will be a
Current Alarm
item,click the
Current Alarm,all the
alarm of this slot will
be shown at the top
44. BROADEN YOUR FUTURE
www.fiberhomegroup.com
Performance Check
44
Port PM Check:
1、double click on
NE,and choose the
slot you want to check
2、click port info,and
choose the port you
want to check
3、right click on the
port,choose the
Current
Performance,and the
port performance will
be shown on the top
45. BROADEN YOUR FUTURE
www.fiberhomegroup.com
Performance Check
45
Board PM Check:
1、double click on
NE,and choose the
slot you want to
check
2、click the slot,and
there will be a
Current Performance
item,click the Current
Performance,all the
performance of this
slot will be shown at
the top
52. BROADEN YOUR FUTURE
www.fiberhomegroup.com
Alarm Level
52
The level of an alarm
indicates the degreeof
severity,inportance and
urgency of an alarm
The alarm can be
classified into four
leverls by the OTNM2000
The following introduces the product positioning, features and configuration requirements of the OTNM2000. The OTNM2000 is a type of software researched and developed by FiberHome to effectively manage multiple types of FiberHome transmission devices on the same platform.
The OTNM2000 consists of the data collection module, data processing module and GUI management module.
The data collection module collects the alarm and performance data of managed objects. The data processing module analyzes and processes the collected data and then stores the data in the database. The data processing module also provides support for alarm management, performance management, configuration management, security management, service management and event management
of the GUI management module.
The GUI management module consists of the configuration management module (Devcfg) and interface management module (OTNM2000).
Configuration management module: a program used by the EMS to configure devices and the system operating environment. The Devcfg is mainly used for data backup and restoration.
Interface management module: Indicates the main interface program of the OTNM2000. It provides the alarm management, performance management,configuration management, security management, service management and event management functions.
The OTNM2000 consists of the data collection module, data processing module and GUI management module.
The data collection module collects the alarm and performance data of managed objects. The data processing module analyzes and processes the collected data and then stores the data in the database. The data processing module also provides support for alarm management, performance management, configuration management, security management, service management and event management
of the GUI management module.
The GUI management module consists of the configuration management module (Devcfg) and interface management module (OTNM2000).
Configuration management module: a program used by the EMS to configure devices and the system operating environment. The Devcfg is mainly used for data backup and restoration.
Interface management module: Indicates the main interface program of the OTNM2000. It provides the alarm management, performance management,configuration management, security management, service management and event management functions.
Network users must be based on actual situation using the configuration management module (Devcfg) to configure network , and to save configuration in the data database, so we could use the management interface module to (OTNM2000) realize all management functions，according to the configuration data.
