The document provides information about MXE electric actuators from Tolomatic, including:
- They use either solid bearing or profiled rail bearing designs for durability and long service life.
- Both bearing types are designed to maximize contact area and reduce wear.
- Additional features like dust wipers, stainless steel bands, and multiple screw technologies enhance durability.
- The actuators are available in different sizes and configurations to meet a wide range of application needs.
Tolomatic mxe electric rodless actuator catalogElectromate
This document provides specifications and details for the MXE electric screw-drive actuator from Tolomatic. It describes the two bearing options - solid bearing and profiled rail. The solid bearing is designed for applications with moderate loads and guidance, while the profiled rail is for moderate to heavy loads. Tables and graphs show the maximum moment and load capacities for each actuator size with the different bearing options. Dimensions and other technical specifications are provided.
Tolomatic rod and rodless style electric actuators brochureElectromate
The document provides information on various electric actuator models from Tolomatic, including rodless screw actuators (MXE-S and MXE-P), which are designed for long life and durability. The MXE-S uses solid bearings, while the MXE-P uses recirculating ball bearings to support loads. Both provide options for mounting motors and accessories.
Tolomatic tks & tkb electric rodless actuator brochureElectromate
The document provides information on Tolomatic's TKS and TKB electric rodless actuators. It summarizes the key features and specifications of the TKS precision screw drive actuator and TKB precision belt drive actuator. Tables compare the actuators' load capacities, bending moments, speeds and other performance specifications. The document is intended to help customers select the appropriate actuator for their application.
Tolomatic mxb belt drive actuator catalogElectromate
The document describes the MxB Rodless belt drive actuator from Tolomatic. It has two versions, the MxB-U which is unguided and requires external guidance, and the MxB-P which has a profiled rail system for guidance and load support. Both offer speeds up to 150-200 in/sec, thrusts up to 418 lbf, and strokes up to 200 inches. They are designed for applications requiring precision positioning, load support, and long service life.
Tolomatic b3 s & b3w electric rodless actuator brochureElectromate
The document provides information on the Tolomatic B3S and B3W electric rodless actuators. The B3S is a screw-drive actuator capable of loads up to 8,000 lbs with thrust up to 2,700 lbs and speeds up to 60 in/sec. The B3W is a belt-drive actuator capable of loads up to 8,000 lbs with speeds up to 200 in/sec. Both utilize a patented internal ball bearing guidance system and have stroke lengths up to 179 inches for the B3S and 207 inches for the B3W.
The document provides information on the National Series 900A crane, including:
- Key features such as a 26 ton rating, 103' four-section boom, self-lubricating wear pads, and internal anti-two-block.
- Mounting configurations showing how the crane can be mounted on truck beds of different lengths, requiring front stabilizers for full 360 degree capacity.
- Specifications including maximum capacities, reaches, weight ratings, and dimensions for different mounting options.
GAM spiral bevel gearboxes are configurable, reliable, and economical right angle gearbox solutions designed for a wide range of applications. They use precision cut and hardened spiral bevel gears that provide high efficiencies and low backlash. GAM offers 11 frame sizes and various input/output configurations. The gearboxes are designed to be robust and maintenance-free, and can handle high torque and power requirements. They are available through Electromate.
GAM spiral bevel gearboxes are highly configurable, reliable, and economical right angle solutions designed for a wide range of applications. They feature precision cut and hardened spiral bevel gears that provide efficiencies between 94-98% and backlash from 10 to 30 arc-min. The modular design allows them to be configured for virtually any application with torque capabilities up to 4,440Nm and frame sizes up to 350mm. GAM spiral bevel gearboxes are dependable, maintenance-free, and lubricated for life.
Tolomatic mxe electric rodless actuator catalogElectromate
This document provides specifications and details for the MXE electric screw-drive actuator from Tolomatic. It describes the two bearing options - solid bearing and profiled rail. The solid bearing is designed for applications with moderate loads and guidance, while the profiled rail is for moderate to heavy loads. Tables and graphs show the maximum moment and load capacities for each actuator size with the different bearing options. Dimensions and other technical specifications are provided.
Tolomatic rod and rodless style electric actuators brochureElectromate
The document provides information on various electric actuator models from Tolomatic, including rodless screw actuators (MXE-S and MXE-P), which are designed for long life and durability. The MXE-S uses solid bearings, while the MXE-P uses recirculating ball bearings to support loads. Both provide options for mounting motors and accessories.
Tolomatic tks & tkb electric rodless actuator brochureElectromate
The document provides information on Tolomatic's TKS and TKB electric rodless actuators. It summarizes the key features and specifications of the TKS precision screw drive actuator and TKB precision belt drive actuator. Tables compare the actuators' load capacities, bending moments, speeds and other performance specifications. The document is intended to help customers select the appropriate actuator for their application.
Tolomatic mxb belt drive actuator catalogElectromate
The document describes the MxB Rodless belt drive actuator from Tolomatic. It has two versions, the MxB-U which is unguided and requires external guidance, and the MxB-P which has a profiled rail system for guidance and load support. Both offer speeds up to 150-200 in/sec, thrusts up to 418 lbf, and strokes up to 200 inches. They are designed for applications requiring precision positioning, load support, and long service life.
Tolomatic b3 s & b3w electric rodless actuator brochureElectromate
The document provides information on the Tolomatic B3S and B3W electric rodless actuators. The B3S is a screw-drive actuator capable of loads up to 8,000 lbs with thrust up to 2,700 lbs and speeds up to 60 in/sec. The B3W is a belt-drive actuator capable of loads up to 8,000 lbs with speeds up to 200 in/sec. Both utilize a patented internal ball bearing guidance system and have stroke lengths up to 179 inches for the B3S and 207 inches for the B3W.
The document provides information on the National Series 900A crane, including:
- Key features such as a 26 ton rating, 103' four-section boom, self-lubricating wear pads, and internal anti-two-block.
- Mounting configurations showing how the crane can be mounted on truck beds of different lengths, requiring front stabilizers for full 360 degree capacity.
- Specifications including maximum capacities, reaches, weight ratings, and dimensions for different mounting options.
GAM spiral bevel gearboxes are configurable, reliable, and economical right angle gearbox solutions designed for a wide range of applications. They use precision cut and hardened spiral bevel gears that provide high efficiencies and low backlash. GAM offers 11 frame sizes and various input/output configurations. The gearboxes are designed to be robust and maintenance-free, and can handle high torque and power requirements. They are available through Electromate.
GAM spiral bevel gearboxes are highly configurable, reliable, and economical right angle solutions designed for a wide range of applications. They feature precision cut and hardened spiral bevel gears that provide efficiencies between 94-98% and backlash from 10 to 30 arc-min. The modular design allows them to be configured for virtually any application with torque capabilities up to 4,440Nm and frame sizes up to 350mm. GAM spiral bevel gearboxes are dependable, maintenance-free, and lubricated for life.
Rapidshor is a modular steel shoring system that is cost effective with a high leg capacity of up to 74kN. It can be used for birdcage supports, towers, tableforms, and backprops. Rapidshor features include a high load capacity, captive deck system, modular design for quick erection, long jack extensions without bracing, corrosion resistance from galvanized finishing, tilt heads and bases for sloping surfaces, and cost savings from using less equipment than other systems.
The document describes Megashor, a modular heavy-duty shoring system that can support axial loads up to 1,000kN. Megashor features high load capacity, flexibility to assemble into various configurations, and accessories that make it versatile. It is used for applications like bridge and stadium construction where it supports slabs, trusses, and roofs during construction activities. Megashor legs come in various sizes and can be configured into single or multi-leg props, towers, and trusses to suit different load requirements and spaces.
The document summarizes Baldor Electric's product offerings for the mining industry. It states that Baldor Electric provides a complete line of reliable power transmission products like motors, gearing, variable speed drives, and other components that are designed specifically for mining operations and ensure maximum uptime. The products are application-specific solutions for different types of mining processes and are engineered to perform reliably in severe mining environments.
- Ultraframe is a new, innovative single sided formwork system that is much faster to erect than traditional methods. It uses modular stacking frames that can be easily attached and moved between pour locations without disassembly.
- The Ultraframe system comes in three frame sizes up to 9.6m tall, allowing it to form walls of various heights. It is flexible in terms of the type of formwork used.
- Ultraframe reduces costs by eliminating the need for wall ties, raking props, and other equipment. Its reusable anchor ties also reduce cast-in component costs.
Torque Systems designs high-performance brushless servo motors, including the TORQUEMASTER 3300 series. These motors provide smooth operation throughout a full speed range with fast response, accurate control, and high torque-to-inertia ratios. When integrated with brush amplifiers, they provide effective motion control solutions for applications like factory automation. The 3300 series delivers superior low-speed and high-speed performance in a compact package. They are available in different torque and speed options with various feedback and mounting configurations.
PROJECT ON STUDY OF COMMUNICATION PROBLEM IN ABB DRIVE - CopyAmanraj Singh Padan
This document provides an overview of a study conducted on drive communication failures at the New Bar Mill of Tata Steel in Jamshedpur, India. It describes the mill's automation configuration, including the PLC control system and drive section components. The study examined problems that occurred in the drive PLC communication and network layout over time, looking at fault history, recommendations from the equipment supplier ABB, and network modifications made in recent years.
Wrap spring clutches and brakes provide high torque in a compact package. They can be mechanically or electrically actuated and are factory assembled and tested. The document discusses various wrap spring product series including the DCB clutch brakes for single-position output and the SC spring clutch which can be mechanically actuated. It provides details on product specifications, dimensions, and part numbers.
The document describes ServoDisc motors from Kollmorgen that offer improved performance over conventional DC servo motors for motion control applications. Key points:
1) ServoDisc motors use an ironless copper disc armature and axial magnetic field, enabling up to 10 times faster acceleration and zero cogging torque compared to conventional designs.
2) Their compact, low-inertia design provides full torque from zero to maximum speed, outperforming conventional motors for applications requiring high throughput.
3) The catalog presents specifications for Kollmorgen's N-Series ServoDisc motors, ranging from 69 to 143 oz-in of continuous torque, with optional feedback devices and compatible amplifiers.
This document provides information on tube and pipe bevelling machines manufactured by Powermaster. It lists the company's global branch offices and sales/service centers. It then provides details on several models of bevelling machines, including the FM-1625, FM-3000, FM-4000, FM-4500, and FM-8000. For each model, it gives specifications such as locking range, speed, torque, stroke, and dimensions. It also describes features like broached bushes, gear boxes, mandrels, and jaws. The document is aimed at providing technical specifications for Powermaster's line of tube and pipe bevelling equipment.
Konecranes provides lifting solutions for workstations, ranging from manual hoists to electric chain hoists and cranes. Their workstation lifting systems are designed with safety and ergonomics as top priorities to help prevent workplace injuries. Konecranes offers a variety of customizable lifting products suited for different load capacities and industrial environments, as well as global service support.
This document describes a 115V VFD heavy duty electric chain hoist that is designed for medium to heavy industrial use. It has a built-in variable frequency drive that provides dual speed capacity. The compact body and plug-and-lift installation make the hoist versatile for any workstation application. Key features include a 4:1 speed ratio, NEMA 4 rating, ASME H4 heavy duty classification, upper and lower limit switches, and lifetime lubricated gears and bearings. It is available in models ranging from 1/2 to 3 ton capacity.
Manufacturing process of 500/600MW stator winding barAvinash Kumar
The document discusses the manufacturing process of stator winding bars for 500/600MW generators at BHEL. It describes the key sections of the manufacturing process, including conductor cutting, insulation, impregnation and assembly. It provides details on the size and number of conductors, insulation classifications, transposition process, resin systems, testing procedures and specifications of 600MW generators. The training gave insights into the complex architecture and coordinated working of various units in a large power plant.
Design of vibration isolation for vibratory compactorsManohar M Hegde
This document discusses the design of vibration isolation systems for vibratory compactors. It covers the function and working principles of vibratory compactors, the health effects of vibration on operators, challenges in vibration isolation design, isolation methods using lumped parameter modeling, considerations in selecting rubber mounts, and examples of isolating plate and drum compactors in one and two stages. The document provides analysis of isolation system design through mathematical modeling and evaluates isolation performance based on reducing vibration levels at operator contact points below safety thresholds.
1. The document describes improvements made to the single-axis robot ISB/SSPA Series, including increased precision, rigidity, payload capacity, speed, and acceleration/deceleration.
2. New small and medium sizes have been added to the iron base SSPA Series. Performance has also been upgraded across models with higher payloads, longer stroke lengths, and increased speeds and accelerations.
3. The document provides specification details on the various series, including positioning repeatability, available sizes, strokes, motor outputs, ball screw leads, speeds, payloads, and allowable moments for each model.
The document summarizes Gudel's new generation of Trackmotion Overhead modules, which allow industrial robots to be mounted in overhead, wall-mounted, or elevated positions. The new modules offer improved guideways, roller systems, carriages, and lubrication to support robots weighing up to 5 tons. They are available in 4 sizes to accommodate different robots. The modules provide increased flexibility and efficiency in manufacturing automation.
This document describes a dual powered water drawing system that uses both solar energy and AC power. The system aims to provide a more economical solution for supplying water to agricultural fields compared to using pumps. It consists of a control panel, DC gear motor, pulleys, belts, buckets, bearings, shafts, and frame. The control panel uses a transformer and switch to operate the system from either solar panels or AC supply. The motor turns the shafts using V-belts and pulleys to lift water in buckets on a belt in a continuous cycle, powered by either energy source. The system components are specified to fulfill this water lifting function in a durable and efficient manner.
- The chief Labong'o has returned to the village without news of when it will rain, worrying the villagers.
- The medicine man Ndithi has a vision that the ancestor Podho demands the sacrifice of Oganda, Labong'o's beautiful daughter, to the lake monster in order to make it rain.
- Labong'o is devastated by this prophecy and dreads telling Oganda and the villagers. He must decide whether to sacrifice Oganda to save the tribe or refuse and risk the tribe's destruction.
Black budget- How intelligence agencies spend $52 billioncherazigzag
The document appears to be a newspaper page listing for Friday, August 30th, 2013. It includes the page numbers A22 and A23, as well as some cryptic letters and words that may be part of an article listing or classified listing. The overall content and purpose of the document is unclear from the limited information provided.
O documento fornece informações sobre a empresa de consultoria contábil ECO CONTÁBIL Ltda, incluindo seus sócios, capital social, missão, valores, responsabilidade social, estratégias de marketing e demonstrações financeiras.
Facility Office es una empresa que provee una amplia gama de productos y servicios para oficinas, incluyendo suelos técnicos, iluminación LED, mamparas, cortinas, mobiliario, sillería y taquillas. La empresa se enfoca en cubrir las necesidades de sus clientes y ofrece estudios personalizados, alta calidad, garantías y un compromiso con el medio ambiente.
Rapidshor is a modular steel shoring system that is cost effective with a high leg capacity of up to 74kN. It can be used for birdcage supports, towers, tableforms, and backprops. Rapidshor features include a high load capacity, captive deck system, modular design for quick erection, long jack extensions without bracing, corrosion resistance from galvanized finishing, tilt heads and bases for sloping surfaces, and cost savings from using less equipment than other systems.
The document describes Megashor, a modular heavy-duty shoring system that can support axial loads up to 1,000kN. Megashor features high load capacity, flexibility to assemble into various configurations, and accessories that make it versatile. It is used for applications like bridge and stadium construction where it supports slabs, trusses, and roofs during construction activities. Megashor legs come in various sizes and can be configured into single or multi-leg props, towers, and trusses to suit different load requirements and spaces.
The document summarizes Baldor Electric's product offerings for the mining industry. It states that Baldor Electric provides a complete line of reliable power transmission products like motors, gearing, variable speed drives, and other components that are designed specifically for mining operations and ensure maximum uptime. The products are application-specific solutions for different types of mining processes and are engineered to perform reliably in severe mining environments.
- Ultraframe is a new, innovative single sided formwork system that is much faster to erect than traditional methods. It uses modular stacking frames that can be easily attached and moved between pour locations without disassembly.
- The Ultraframe system comes in three frame sizes up to 9.6m tall, allowing it to form walls of various heights. It is flexible in terms of the type of formwork used.
- Ultraframe reduces costs by eliminating the need for wall ties, raking props, and other equipment. Its reusable anchor ties also reduce cast-in component costs.
Torque Systems designs high-performance brushless servo motors, including the TORQUEMASTER 3300 series. These motors provide smooth operation throughout a full speed range with fast response, accurate control, and high torque-to-inertia ratios. When integrated with brush amplifiers, they provide effective motion control solutions for applications like factory automation. The 3300 series delivers superior low-speed and high-speed performance in a compact package. They are available in different torque and speed options with various feedback and mounting configurations.
PROJECT ON STUDY OF COMMUNICATION PROBLEM IN ABB DRIVE - CopyAmanraj Singh Padan
This document provides an overview of a study conducted on drive communication failures at the New Bar Mill of Tata Steel in Jamshedpur, India. It describes the mill's automation configuration, including the PLC control system and drive section components. The study examined problems that occurred in the drive PLC communication and network layout over time, looking at fault history, recommendations from the equipment supplier ABB, and network modifications made in recent years.
Wrap spring clutches and brakes provide high torque in a compact package. They can be mechanically or electrically actuated and are factory assembled and tested. The document discusses various wrap spring product series including the DCB clutch brakes for single-position output and the SC spring clutch which can be mechanically actuated. It provides details on product specifications, dimensions, and part numbers.
The document describes ServoDisc motors from Kollmorgen that offer improved performance over conventional DC servo motors for motion control applications. Key points:
1) ServoDisc motors use an ironless copper disc armature and axial magnetic field, enabling up to 10 times faster acceleration and zero cogging torque compared to conventional designs.
2) Their compact, low-inertia design provides full torque from zero to maximum speed, outperforming conventional motors for applications requiring high throughput.
3) The catalog presents specifications for Kollmorgen's N-Series ServoDisc motors, ranging from 69 to 143 oz-in of continuous torque, with optional feedback devices and compatible amplifiers.
This document provides information on tube and pipe bevelling machines manufactured by Powermaster. It lists the company's global branch offices and sales/service centers. It then provides details on several models of bevelling machines, including the FM-1625, FM-3000, FM-4000, FM-4500, and FM-8000. For each model, it gives specifications such as locking range, speed, torque, stroke, and dimensions. It also describes features like broached bushes, gear boxes, mandrels, and jaws. The document is aimed at providing technical specifications for Powermaster's line of tube and pipe bevelling equipment.
Konecranes provides lifting solutions for workstations, ranging from manual hoists to electric chain hoists and cranes. Their workstation lifting systems are designed with safety and ergonomics as top priorities to help prevent workplace injuries. Konecranes offers a variety of customizable lifting products suited for different load capacities and industrial environments, as well as global service support.
This document describes a 115V VFD heavy duty electric chain hoist that is designed for medium to heavy industrial use. It has a built-in variable frequency drive that provides dual speed capacity. The compact body and plug-and-lift installation make the hoist versatile for any workstation application. Key features include a 4:1 speed ratio, NEMA 4 rating, ASME H4 heavy duty classification, upper and lower limit switches, and lifetime lubricated gears and bearings. It is available in models ranging from 1/2 to 3 ton capacity.
Manufacturing process of 500/600MW stator winding barAvinash Kumar
The document discusses the manufacturing process of stator winding bars for 500/600MW generators at BHEL. It describes the key sections of the manufacturing process, including conductor cutting, insulation, impregnation and assembly. It provides details on the size and number of conductors, insulation classifications, transposition process, resin systems, testing procedures and specifications of 600MW generators. The training gave insights into the complex architecture and coordinated working of various units in a large power plant.
Design of vibration isolation for vibratory compactorsManohar M Hegde
This document discusses the design of vibration isolation systems for vibratory compactors. It covers the function and working principles of vibratory compactors, the health effects of vibration on operators, challenges in vibration isolation design, isolation methods using lumped parameter modeling, considerations in selecting rubber mounts, and examples of isolating plate and drum compactors in one and two stages. The document provides analysis of isolation system design through mathematical modeling and evaluates isolation performance based on reducing vibration levels at operator contact points below safety thresholds.
1. The document describes improvements made to the single-axis robot ISB/SSPA Series, including increased precision, rigidity, payload capacity, speed, and acceleration/deceleration.
2. New small and medium sizes have been added to the iron base SSPA Series. Performance has also been upgraded across models with higher payloads, longer stroke lengths, and increased speeds and accelerations.
3. The document provides specification details on the various series, including positioning repeatability, available sizes, strokes, motor outputs, ball screw leads, speeds, payloads, and allowable moments for each model.
The document summarizes Gudel's new generation of Trackmotion Overhead modules, which allow industrial robots to be mounted in overhead, wall-mounted, or elevated positions. The new modules offer improved guideways, roller systems, carriages, and lubrication to support robots weighing up to 5 tons. They are available in 4 sizes to accommodate different robots. The modules provide increased flexibility and efficiency in manufacturing automation.
This document describes a dual powered water drawing system that uses both solar energy and AC power. The system aims to provide a more economical solution for supplying water to agricultural fields compared to using pumps. It consists of a control panel, DC gear motor, pulleys, belts, buckets, bearings, shafts, and frame. The control panel uses a transformer and switch to operate the system from either solar panels or AC supply. The motor turns the shafts using V-belts and pulleys to lift water in buckets on a belt in a continuous cycle, powered by either energy source. The system components are specified to fulfill this water lifting function in a durable and efficient manner.
- The chief Labong'o has returned to the village without news of when it will rain, worrying the villagers.
- The medicine man Ndithi has a vision that the ancestor Podho demands the sacrifice of Oganda, Labong'o's beautiful daughter, to the lake monster in order to make it rain.
- Labong'o is devastated by this prophecy and dreads telling Oganda and the villagers. He must decide whether to sacrifice Oganda to save the tribe or refuse and risk the tribe's destruction.
Black budget- How intelligence agencies spend $52 billioncherazigzag
The document appears to be a newspaper page listing for Friday, August 30th, 2013. It includes the page numbers A22 and A23, as well as some cryptic letters and words that may be part of an article listing or classified listing. The overall content and purpose of the document is unclear from the limited information provided.
O documento fornece informações sobre a empresa de consultoria contábil ECO CONTÁBIL Ltda, incluindo seus sócios, capital social, missão, valores, responsabilidade social, estratégias de marketing e demonstrações financeiras.
Facility Office es una empresa que provee una amplia gama de productos y servicios para oficinas, incluyendo suelos técnicos, iluminación LED, mamparas, cortinas, mobiliario, sillería y taquillas. La empresa se enfoca en cubrir las necesidades de sus clientes y ofrece estudios personalizados, alta calidad, garantías y un compromiso con el medio ambiente.
אלעד גולדנברג: שנקר - 13 אוקטובר 2013 - סחר של יום חדש - עולם המסחר האלקטרוניElad Goldenberg
שיעור ראשון בקורס "עולם המסחר האלקטרוני – סחר של יום חדש", אלעד גולדנברג
* איקומרס ואתם
* מהו איקומרס
* השיעורים המיוחדים שבנינו לכם
* פתיחת חנות האונליין שלכם
* מושגי ליבה של עולם האיקומרס
* על מה נדבר בשיעור הבא
This document provides summaries for 15 books that were nominees for the 2013-2014 GA Peach Book Award. Each summary is 1-3 sentences and highlights the essential plot elements or themes of the book. The summaries are organized alphabetically by book title.
Tolomatic's MXE Electric Linear Screw Actuators are designed to outlast every electric linear screw actuator on the market
The MXE electric screw actuators set a new standard for durability. MXE electric screw actuators are available with 2 different carriers (carriages).
1) The MXE-P profiled rail offers high load and bending moment capacities in a low profile package.
2) The MXE-S solid bearing design reduces stress concentration by 59% for optimal performance.
Features of the MXE electric linear screw actuators:
High thrust capabilities (up to 4,300 lbf, 19,127N)
6 body sizes accommodate a wide range of forces and loads
Your choice of solid or ball bearing screw/nut combinations
Excellent repeatability, high duty cycle performance
High load capacity (up to 2,583 lbf, 11,490N with auxiliary carrier)
Heavy Duty Linear Actuators, Belt Driven Actuators: MXBTolomatic
Tolomatic's heavy duty linear actuator, the MXB electric belt driven actuator is designed to outlast every rodless actuator on the market.
The MXB belt driven actuators set a new standard for durability. Built with Endurance Technology materials, MXB belt driven actuators are available with 2 different carriers (carriages).
1) The MXB-P profiled rail offers high load and bending moment capacities in a low profile package.
2) The MXB-U is designed for applications where loads are externally guided and supported.
Features of the MXB belt driven actuators:
High speed and acceleration capabilities (up to 1200 in/sec2)
6 body sizes accommodate a wide range of forces and loads
Polyurethane belt with steel members resists stretching
Excellent repeatability, high duty cycle performance
Choose MXB belt drive for longer strokes than screw drive actuators
Tolomatic ima integrated motor rod style actuator brochureElectromate
The document describes the IMA integrated motor actuator from Tolomatic. The IMA combines a servo motor integrated into a ball or roller screw-driven actuator to provide efficient, high force motion in a compact design. It has features like long life, high accuracy, and compatibility. The IMA eliminates the need for multiple components like couplers, belts, and gears. It is suitable for applications across industries requiring reliable, affordable actuated motion.
The document discusses Thomson BSA lead and ball screw products. It provides an overview of lead screw applications and features, including descriptions of custom plastic nuts, custom actuators, precision screw products, and complete assemblies. It also covers product details for advanced anti-backlash supernuts, flange mount supernuts, thread mount supernuts, thread mount bronze nuts, and more. Dimensional drawings and specifications are provided.
The document discusses Thomson BSA lead and ball screws. It includes information on their precision rolling process, PTFE coating, and various types of lead screws and nuts they offer, including anti-backlash supernuts. The document notes the advantages of lead screws over ball screws such as lower cost, variety of sizes available, and less vibration and noise. It also provides design considerations for using lead screws such as load limits, cantilevered loads, column loading, and critical speed.
Torque Systems designs high-performance brush servo motors that provide efficiency, flexibility, and long service life. Their TORQUEMASTER 4000 series motors deliver smooth operation throughout the full speed range with fast response, accurate control, and high torque-to-inertia ratios. They are designed for applications including factory automation, packaging, robotics, machine tools, and medical devices. The 4000 series provides superior low-speed performance and maximum power ratings with low thermal resistance for high-speed performance in a compact package.
Thomson Linear Mechanical Motion SolutionsElectromate
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
The document discusses Thomson, a company that manufactures mechanical motion solutions including linear motion products like linear ball bushing bearings, linear guides, ball screws, linear motion systems, and linear actuators. It provides information on their broad product offerings, over 60 years of experience, and worldwide support infrastructure.
Torque Systems designs high-performance brush servo motors that provide efficiency, flexibility, and long service life. Their TORQUEMASTER 2000 series motors deliver smooth operation throughout the full speed range with fast response, accurate control, and high torque-to-inertia ratios. These brush servo motors are suitable for applications in factory automation, packaging, robotics, machine tools, and medical devices. The 2000 series motors offer superior low-speed performance and maximum power ratings with low thermal resistance for high-speed performance in a compact package.
This document provides product information on John Crane's Metastream T Series couplings. The couplings feature scalloped stainless steel flexible membranes designed for high torque and misalignment conditions. They are available in a cartridge design for easy installation and maintenance of integral balance. Standard features include API compliance, intrinsic balance exceeding class 9, and temperature range of -55°C to 150°C. The document describes the selection process and provides technical specifications and dimensions for the T Series couplings.
Pronic is a world leader in tapping solutions for sheet metal. They provide in-die, in-line, and off-line tapping machines for automotive, electrical, and appliance manufacturing. Their modular tapping units can be customized for application-specific requirements like tight spaces, high speeds, or difficult materials. Examples demonstrate how they optimize tapping processes for parts in the automotive and electrical industries to improve production efficiency and lower costs.
The document provides information on Danaher Motion's lead screw products, including precision lead screws, polymer nuts, and engineering guidelines. It discusses key features such as precision accuracy, bearing-grade polymers, anti-backlash designs, and load capacities. It also provides product specifications, ordering information, and engineering property tables and charts.
The document provides information about lead screw assemblies from Danaher Motion. It discusses key features such as precision accuracy, bearing grade polymer nuts, and ActiveCAM technology that provides zero backlash. It also lists common applications for lead screws in medical, semiconductor, and manufacturing equipment. Engineering guidelines are provided that cover load limits, critical speeds, column loading, temperature limits, and efficiency formulas.
Thomson Linear Super Metric Ball Bushing Bearings Electromate
The document describes new Super Metric Ball Bushing bearings and pillow blocks from Danaher Motion. The bearings offer low friction, self-alignment, high accelerations and speeds, integral wipers to keep out dirt, and adjustable open and closed configurations. The pillow blocks contain replaceable bearings, integral seals, and tapped or through-hole mounting for easy installation. They provide increased load capacity and travel life over single bearing versions.
Thomson super metric_ball_bushing_bearings_specsheetElectromate
The document describes new Super Metric Ball Bushing bearings and pillow blocks from Danaher Motion. The bearings offer low friction, self-alignment, high accelerations and speeds, integral wipers to keep out dirt, and adjustable open and closed configurations. The pillow blocks contain replaceable bearings, integral seals, and tapped or through-hole mounting for easy installation. They provide increased load capacity and travel life over single bearing versions.
EDRIVE manufactures electric linear actuators for industrial automation applications requiring durable construction, long life, and high precision. The document introduces several of EDRIVE's actuator series, summarizing their key features:
- The VecTac VT series provides cost-effective actuators up to 2,000 lbf thrust and 40 in/sec velocity for general industrial use.
- The L-Tac LS series is designed for long strokes from 24-60 inches at up to 40 in/sec velocity and 2,000 lbf thrust.
- The E-Tac ET series offers an affordable solution for lighter 300 lbf loads at speeds up to 33 in/sec.
- Heavier-duty models include the
The document is a selection guide for Kollmorgen KBMTM Series Brushless Motors. It provides information on 14 different motor sizes ranging from the KBM-10 to KBM-260, including dimensional drawings, performance specifications, and installation guidelines. Standard features include fully encapsulated windings, PTC thermistor protection, and RoHS compliance. Options include sensor feedback models and choices of insulation systems. Modifications requiring engineering review include special windings, rotor hub changes, and coating/plating alterations. Safety, packaging/storage, and electrical interface guidelines are provided to ensure proper installation and operation.
The document provides information about the RSA and GSA electric rod-style actuators from Tolomatic. It describes the key features of the RSA, which provides a basic electric screw-driven rod actuator, and the GSA, which provides guidance and support for loads. Both actuators can be built to order with various mounting, rod end, screw, and motor options to suit a wide range of applications.
Torque Systems designs high-performance brush servo motors, including the TORQUEMASTER 2200 series. These motors provide fast response, accurate control, high torque-to-inertia ratios, and smooth operation throughout a full speed range. The 2200 Series delivers superior low and high speed performance. When integrated with brush amplifiers, they provide efficient motion control solutions for applications like factory automation. The motors are available in sizes from 5-10 lb-in torque with customization options.
The document discusses diamond wire saws and their use in efficient underwater cutting for offshore decommissioning projects. It provides an overview of Mactech, a leader in underwater cutting technologies, and their various diamond wire saw models ranging from 4 to 102 inches. The saws can cut through materials like pipelines, structures, and shipwrecks. Articulating diamond wire saws are highlighted as having advantages like minimizing excavation needs and deck space due to their compact, articulating design.
Similar to Tolomatic mxe electric_actuators_catalog (20)
Automated screw thread quality checking using SMAC LAR55 actuator new produc...Electromate
The document discusses an automated screw thread quality checking solution using SMAC LAR55 actuators. It allows 100% inspection of screw threads to check for issues like oversizing, cross-threading, depth, and pitch. This can help automakers meet higher quality standards by eliminating defective parts and providing immediate feedback. The LAR55's precision Z-theta motion makes it suitable for automatically checking screw threads.
An overview of the various kinematic models in both parallel and serial robot...Electromate
This document provides an overview of kinematic models for parallel and serial robotic mechanisms and their suitability for precision applications. It introduces Ilian Bonev, a professor at École de technologie supérieure who is an expert in parallel robots and precision robotics. It then describes some parallel robots that have been developed at the Control and Robotics Laboratory including ones for medical, manufacturing, and research applications. The document concludes with sections on robot calibration methods and the differences between serial and parallel mechanisms.
Galil motion control robotic symposium presentation-linear motion from non-li...Electromate
The document discusses non-linear robotic motion control solutions. It describes how Galil Motion Control provides controllers for various types of non-linear robots like SCARA and delta robots. It covers topics like selecting the robot topology, designing each joint, motor selection, forward and inverse kinematics equations, vibration reduction techniques, and examples of implementing motion control for SCARA robots.
Advanced motion controls robotics symposium presentation-open standard tools ...Electromate
This document discusses the development of control software for a linear delta robot used in 3D printing. It describes using PLCopen function blocks and XML files to create reusable software components for robot kinematics and handling G-code from slicing programs. Function block diagrams are created to process G-code, set coordinate systems, and represent the overall project logic. The solution involves creating user-defined function blocks to handle the robot's inverse kinematics and translate G-code commands into motions.
Maxon motor ag robotic symposium presentation-impedance control overview and ...Electromate
The document discusses impedance control, an approach to robot control that models mechanical systems as electrical circuits using impedance. It defines electrical and mechanical impedance analogously and describes how components like resistors, inductors, and capacitors correspond to dampers, masses, and springs physically. The document outlines applications of impedance control and emphasizes the importance of selecting low-inertia motors, high-efficiency gears, and fast, accurate sensors and controllers. Overall, the document argues that impedance control requires creative engineering of mechanical designs and electrical components.
Kollmorgen robotic symposium presentation-motor design impacts on the optimiz...Electromate
The document discusses how motor design impacts the optimization of robotic systems. It explains that frameless motors can enable smaller, lighter and faster robots through their direct drive capabilities and high torque density. The document also covers various motor topologies and important concepts like torque constant, motor size constant, and how they relate to continuous torque capacity, efficiency and losses. Application examples discussed include collaborative robots, surgical robots, and mobile robots.
Harmonic drive llc robotics symposium presentation-designing from the inside ...Electromate
The document discusses defining robot performance requirements and how customized solutions from Harmonic Drive can help meet those requirements. It provides an overview of Harmonic Drive's product line and gear technologies, then discusses how mechanical modifications and performance customizations can be made to their gear components and systems to optimize robots for specific design requirements and applications. Customizations like increased accuracy, stiffness, torque properties and materials can be made, with varying levels of difficulty and cost implications discussed.
Thomson Linear Dual Shaft Rail 2DA Modular SpecsElectromate
This document provides specifications and dimensional drawings for Thomson Industries' Dual Shaft Rail linear guides with modular carriages. It includes part numbers, dimensions, load ratings and descriptions of the components. Linear guides use dual linear race shaft rails and modular carriages with open type Super Smart Ball Bushings. They are used in continuously supported applications requiring rigidity and are adaptable to any drive system.
Thomson Linear 2DA QuickSlide System with BrakeElectromate
This document provides specifications for Thomson Industries' 2DA QuickSlide system with brake, including:
- It offers manual locking with infinite positioning, no carriage surface deflection when locked, and immediate availability in common sizes.
- The locking mechanism does not increase load on the bearing and allows zero axial movement during locking.
- It provides a fully supported dual shaft assembly for maximum rigidity and unlimited travel.
Thomson Linear RoundRail 2CA Web Universal Carriage SpecsElectromate
This document contains specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, part numbers, load ratings and descriptions of the components. The linear guides use a double shaft and welded web design for improved torque strength and deflection characteristics. They are designed to move medium loads with low friction and are commonly used when bridging gaps.
Thomson Linear RoundRail 1VC Double End Supported SpecsElectromate
The document provides specifications for various FluoroNyliner linear guide components including:
- Pillow blocks, twin pillow blocks, shaft end support blocks, and mounting table tops for different size linear guides ranging from 0.375 to 1.5 inches in diameter.
- It lists the part numbers, dimensions, materials, weights, and other specifications for each component.
- It also includes an illustration of a double end supported linear guide system with pillow blocks, shafts, end supports, and a size B mounting table top.
Thomson Linear RoundRail 2CA Web Flanged Carriage SpecsElectromate
This document provides specifications for Thomson Industries' Twin Shaft Web Linear Guide system. It includes dimensions, load capacity information, and part numbers for various components of the 2CA linear guide, which features a flanged carriage design and double linear race shaft for improved torque and deflection characteristics. Configuration and installation details are also listed.
Thomson Linear RoundRail Twin Shaft Web 2CAElectromate
The document provides specifications for Thomson RoundRail linear guides and components. It includes dimensions, features, and part numbering for twin shaft web linear guides in both vertical and horizontal configurations ranging from 0.5 to 1 inch in diameter. Load capacity charts are provided for different guide sizes and configurations that can support loads between 165 to 3000 pounds depending on the model. Maximum guide lengths are listed as 72 inches and engineering calculations for shaft deflection are also noted.
Thomson Linear RoundRail 1VC Double Unsupported SpecsElectromate
The document contains specifications for various FluoroNyliner linear guide parts, including dimensions, part numbers, materials, load ratings, and performance notes. It lists 14 different linear guide parts with nominal diameters ranging from 0.375 to 1.5 inches. For each part, it provides dimensions for components like bearing blocks, carriages, and table tops. It also includes general information on specifying linear guides and product notes on materials and lubrication.
The Thomson WhisperTrak electric linear actuator offers a compact, quiet, and durable solution for applications requiring linear motion. It is particularly well-suited for personal mobility, medical, and rehabilitation equipment due to its small size and silent operation. The actuator provides reliable, maintenance-free movement and has an IP67 rating, making it protected against water and dust. Its flexibility and high performance in a small package make it suitable for a wide range of industries.
The document provides information on the T-Series Ball Profile Rail from Thomson, including:
- It is lightweight, highly flexible, and forgiving, making it suitable for applications with poor misalignment.
- It has a low cost of installation as it can be mounted directly to non-machined bases without special tools.
- It offers industry standard dimensions and dimensions interchangeable with other rail brands, allowing for easy replacement.
Thomson Linear RoundRail Accessories Collapsable Bellows SpecsElectromate
This document provides specifications for various bellows that can be used to protect slides and shafts. It lists different part numbers for bellows with a range of nominal shaft diameters from 1/4 to 1 1/2 inches. The bellows are made of polyester cover and PVC stiffeners. Dimensions such as length, width, and height are provided for each part number. Some bellows are single shaft while others are dual shaft or for horizontal vs vertical systems. Each bellows comes with attachment pieces like Velcro or mounting brackets.
Thomson Linear Roundrail Dual Shaft Rail 2DA SpecsElectromate
The document provides specifications for Danaher Motion's dual shaft rail linear guides with integrated carriages. It includes dimensions, load ratings, dynamic capacities, and part numbering for the 2DA series linear guides available in nominal diameters of 0.5, 0.75, and 1.0 inches. Both full and short length carriage options are detailed along with components, material specifications, and the supplier contact information.
Thomson Linear RoundRail Continuous Support 1PC SpecsElectromate
This document provides specifications for various linear guide assemblies with table tops from Thomson Industries. It includes dimensions, part numbers, load ratings and limit data for single rail linear guides with sizes ranging from M12 to M40 diameter in configurations with 4 pillow blocks, 2 twin pillow blocks or no pillow blocks and size E or F table tops. Mounting details and specifications are provided for the various components including rails, pillow blocks and table tops.
Thomson Linear RoundRail Continuous Support 1PB SpecsElectromate
The document contains specifications for various continuously supported linear guide assemblies and their components. It lists part numbers, dimensions, load ratings, and other technical specifications for linear guides, support rails, pillow blocks, and bearings. Materials include aluminum alloys and bearings include ball bushings. Linear guides are specified by part number plus length and provide continuous support for applications requiring rigidity.
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/temporal-event-neural-networks-a-more-efficient-alternative-to-the-transformer-a-presentation-from-brainchip/
Chris Jones, Director of Product Management at BrainChip , presents the “Temporal Event Neural Networks: A More Efficient Alternative to the Transformer” tutorial at the May 2024 Embedded Vision Summit.
The expansion of AI services necessitates enhanced computational capabilities on edge devices. Temporal Event Neural Networks (TENNs), developed by BrainChip, represent a novel and highly efficient state-space network. TENNs demonstrate exceptional proficiency in handling multi-dimensional streaming data, facilitating advancements in object detection, action recognition, speech enhancement and language model/sequence generation. Through the utilization of polynomial-based continuous convolutions, TENNs streamline models, expedite training processes and significantly diminish memory requirements, achieving notable reductions of up to 50x in parameters and 5,000x in energy consumption compared to prevailing methodologies like transformers.
Integration with BrainChip’s Akida neuromorphic hardware IP further enhances TENNs’ capabilities, enabling the realization of highly capable, portable and passively cooled edge devices. This presentation delves into the technical innovations underlying TENNs, presents real-world benchmarks, and elucidates how this cutting-edge approach is positioned to revolutionize edge AI across diverse applications.
AppSec PNW: Android and iOS Application Security with MobSFAjin Abraham
Mobile Security Framework - MobSF is a free and open source automated mobile application security testing environment designed to help security engineers, researchers, developers, and penetration testers to identify security vulnerabilities, malicious behaviours and privacy concerns in mobile applications using static and dynamic analysis. It supports all the popular mobile application binaries and source code formats built for Android and iOS devices. In addition to automated security assessment, it also offers an interactive testing environment to build and execute scenario based test/fuzz cases against the application.
This talk covers:
Using MobSF for static analysis of mobile applications.
Interactive dynamic security assessment of Android and iOS applications.
Solving Mobile app CTF challenges.
Reverse engineering and runtime analysis of Mobile malware.
How to shift left and integrate MobSF/mobsfscan SAST and DAST in your build pipeline.
Skybuffer SAM4U tool for SAP license adoptionTatiana Kojar
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
How information systems are built or acquired puts information, which is what they should be about, in a secondary place. Our language adapted accordingly, and we no longer talk about information systems but applications. Applications evolved in a way to break data into diverse fragments, tightly coupled with applications and expensive to integrate. The result is technical debt, which is re-paid by taking even bigger "loans", resulting in an ever-increasing technical debt. Software engineering and procurement practices work in sync with market forces to maintain this trend. This talk demonstrates how natural this situation is. The question is: can something be done to reverse the trend?
"Frontline Battles with DDoS: Best practices and Lessons Learned", Igor IvaniukFwdays
At this talk we will discuss DDoS protection tools and best practices, discuss network architectures and what AWS has to offer. Also, we will look into one of the largest DDoS attacks on Ukrainian infrastructure that happened in February 2022. We'll see, what techniques helped to keep the web resources available for Ukrainians and how AWS improved DDoS protection for all customers based on Ukraine experience
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
In the realm of cybersecurity, offensive security practices act as a critical shield. By simulating real-world attacks in a controlled environment, these techniques expose vulnerabilities before malicious actors can exploit them. This proactive approach allows manufacturers to identify and fix weaknesses, significantly enhancing system security.
This presentation delves into the development of a system designed to mimic Galileo's Open Service signal using software-defined radio (SDR) technology. We'll begin with a foundational overview of both Global Navigation Satellite Systems (GNSS) and the intricacies of digital signal processing.
The presentation culminates in a live demonstration. We'll showcase the manipulation of Galileo's Open Service pilot signal, simulating an attack on various software and hardware systems. This practical demonstration serves to highlight the potential consequences of unaddressed vulnerabilities, emphasizing the importance of offensive security practices in safeguarding critical infrastructure.
Fueling AI with Great Data with Airbyte WebinarZilliz
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
Taking AI to the Next Level in Manufacturing.pdfssuserfac0301
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
Connector Corner: Seamlessly power UiPath Apps, GenAI with prebuilt connectorsDianaGray10
Join us to learn how UiPath Apps can directly and easily interact with prebuilt connectors via Integration Service--including Salesforce, ServiceNow, Open GenAI, and more.
The best part is you can achieve this without building a custom workflow! Say goodbye to the hassle of using separate automations to call APIs. By seamlessly integrating within App Studio, you can now easily streamline your workflow, while gaining direct access to our Connector Catalog of popular applications.
We’ll discuss and demo the benefits of UiPath Apps and connectors including:
Creating a compelling user experience for any software, without the limitations of APIs.
Accelerating the app creation process, saving time and effort
Enjoying high-performance CRUD (create, read, update, delete) operations, for
seamless data management.
Speakers:
Russell Alfeche, Technology Leader, RPA at qBotic and UiPath MVP
Charlie Greenberg, host
Dandelion Hashtable: beyond billion requests per second on a commodity serverAntonios Katsarakis
This slide deck presents DLHT, a concurrent in-memory hashtable. Despite efforts to optimize hashtables, that go as far as sacrificing core functionality, state-of-the-art designs still incur multiple memory accesses per request and block request processing in three cases. First, most hashtables block while waiting for data to be retrieved from memory. Second, open-addressing designs, which represent the current state-of-the-art, either cannot free index slots on deletes or must block all requests to do so. Third, index resizes block every request until all objects are copied to the new index. Defying folklore wisdom, DLHT forgoes open-addressing and adopts a fully-featured and memory-aware closed-addressing design based on bounded cache-line-chaining. This design offers lock-free index operations and deletes that free slots instantly, (2) completes most requests with a single memory access, (3) utilizes software prefetching to hide memory latencies, and (4) employs a novel non-blocking and parallel resizing. In a commodity server and a memory-resident workload, DLHT surpasses 1.6B requests per second and provides 3.5x (12x) the throughput of the state-of-the-art closed-addressing (open-addressing) resizable hashtable on Gets (Deletes).
HCL Notes and Domino License Cost Reduction in the World of DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Driving Business Innovation: Latest Generative AI Advancements & Success StorySafe Software
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Tolomatic mxe electric_actuators_catalog
1. MXE ELECTRIC ACTUATORS
MAXIMUM DURABILITYMAXIMUM DURABILITY
S SOLID BEARING
P PROFILED RAIL
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
2. 2 1.800.328.21742 1.800.328.21742 1.800.328.2174
S-SOLID BEARING
•Large bearing surface contact area optimizes
stress distribution on bearing for long service life
•Large carrier mounting pattern for more load
stability and compatibility with existing BCS
applications
•Engineered bearing material does not require
additional lubrication
• Solid bearings are field replaceable
P-PROFILED RAIL
•THK® Caged Ball® bearings with reduced friction for
reliable service life
•High load and bending moment capacities
•Low profile to fit your application
•High precision bearings feature smooth, low
breakaway motion
The MXE electric actuator is exactly what
you expect from the industry’s number
one rodless supplier. Designed with our
exclusive ENDURANCE TECHNOLOGYSM
features, the MX delivers superior per-
formance to meet the most demanding
applications. Nobody knows rodless like
Tolomatic, and the MX proves it.
THE MXE ELECTRIC ACTUATOR – DESIGNED TO OUTLAST
EVERY RODLESS ACTUATOR ON THE MARKET
• DURABLE BEARINGS. Two bearing choices to match your application
needs. Solid bearing design optimizes stress distribution for optimal
performance. Profiled rail design uses THK® Caged Ball® technology to
reduce friction and extend actuator life.
• DURABLE BANDS. Stainless steel bands are stronger and will not
elongate like elastomer (non-metallic) bands, providing a reliable seal
over the life of the actuator.
Choose from our broad line of MX products: MXP pneumatic rodless cylinders and
MXE electric actuators. World class product performance, five days built-to-order and
legendary customer service . . . what you expect from the leader . . . Tolomatic!
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
3. www.tolomatic.com/mxe 3www.tolomatic.com/mxe 3
SELECT THE PERFORMANCE YOU NEED
MOMENT & LOAD CAPACITY COMPARISON
Bearing
Type Solid Bearing Profiled Rail
Moment Moderate High
Capacity + Mx Capacity
Ideal • Side Loads • High Moment Loads
Applications • Moderate or Light • High Speeds with
Loads Heavy Loads
• Guided Loads • High Precision
Product Features Page 4 Page 6
Tolomatic MX
Electric
Actuator Model
Graph for model comparison, data from MXE40 actuator
Choose from: • Two Bearing Models • Six Actuator Sizes • Built to Your Specified Stroke Length
0
1,000
2,000
PS
MAX.BENDINGMOMENT(in.-lbs.)
1,800
1,600
1,400
1,200
800
600
400
200
224
Nm
112
Nm
MAX.Fz[LOAD](lbs.)MAX.Fz[LOAD](lbs.)
225
736
FzMx
Fz
MyMy
Mz
Mx My Mz Fz
TABLE OF CONTENTS
Introduction..........................................2
Comparison..........................................3
S Solid Bearing Features......................4
P Profiled Rail Features........................6
Motion Control Systems Overview........8
S Moment and Load Capacity...........10
P Moment and Load Capacity...........11
Specifications.....................................12
Tube Clamp Reqirements...................15
Screw Critical Speed Capacities.........16
S Solid Bearing Dimensions...............26
P Profiled Rail Bearing Dimensions....28
Inline Motor Mounting Dimensions......30
S Reverse Parallel Motor Mounting
Dimensions.........................................34
P Reverse Parallel Motor Mounting
Dimensions.........................................39
Switches ............................................44
S Adjustment Procedures..................47
Compile Application Requirements.....48
Selection Guidelines...........................49
Service Parts......................................50
Ordering.............................................51
4. 4 1.800.328.21744 1.800.328.21744 1.800.328.21744 1.800.328.21744 1.800.328.21744 1.800.328.21744 1.800.328.2174
S SOLID BEARING Endurance Technology features are
designed for maximum durability to
provide extended service life.
DUST WIPER
•Formed end cap and
side dust wipers keep
contaminants from entering
the actuator’s internal area
RETAINED DUST BAND
•Retained dust band keeps contaminants from entering
the actuator interior, protecting components for
reduced maintenance and increased uptime
LARGE FLEXIBLE
MOUNTING PATTERN
•Carrier gives more load stability
•Compatibility with existing BCS
applications
•More fastening options
STAINLESS STEEL BAND
•Exterior dust band
made of fatigue
resistant
stainless
steel
STAINLESS STEEL IS
DURABLE, FLEXIBLE AND
CORROSION RESISTANT
NON-WEAR BAND RETENTION
•Magnetically retained band is not subject to
wear as are mechanically retained systems
MULTIPLE SCREW TECHNOLOGIES
YOU CAN CHOOSE:
•Solid nuts of engineered resins
for quiet performance at the
lowest cost - 5 choices
•Ball nuts offer positioning
accuracy and repeatability
with longer life, low-backlash
available - 3 choices
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
5. www.tolomatic.com/mxe 5www.tolomatic.com/mxe 5www.tolomatic.com/mxe 5www.tolomatic.com/mxe 5www.tolomatic.com/mxe 5www.tolomatic.com/mxe 5
…MAXIMUM DURABILITY
OPTIONS
AUXILIARY CARRIER DC
• 2X higher Fz (load) capacity
• High bending moment capacity
FLOATING MOUNT FL
•Compensates for non-parallelism between MX
actuator and externally guided load
TUBE CLAMPS TC
•Used for intermediate support
•Flush with bottom of actuator
to retain low profile
•Drop-in, adjustable mounting locations
(MXE16 uses T-nuts with mounting plates)
MOUNTING PLATES MP
•To provide clearance for motor and mount
•Use in conjunction with tube clamps
SWITCHES
•Wide variety of sensing choices: Reed, Solid
State PNP or NPN, all available normally open
or normally closed
•Flush mount, drop-in installation
•Bright LEDs, power & signal indication
•CE rated, RoHS compliant
NOTE: Boxed letters
indicate ordering codes
TRAPEZOIDAL BEARINGS
•Trapezoidal design maximizes bearing
surface area for less pressure on
bearing surfaces; less pressure results
in less wear
•Engineered bearing material has
low static and dynamic friction with
low wear properties for long lasting,
smooth operation
•Bearings are field replaceable for
extended service life
INCH OR METRIC MOUNTING
•Your choice of inch (US standard) or metric
mounting to the carrier
NON-BINDING BEARING ARMS
•Bearings are tensioned
indirectly, providing bind
free adjustment
YOUR MOTOR HERE
YOU CAN CHOOSE:
•Motor or gearbox supplied and installed by Tolomatic
•Specify the device to be installed and actuator ships
with proper mounting hardware - MXE is a “Your Motor
Here” actuator for easy in-line motor installation. Check
our website (www.tolomatic.com/ymh) for complete
YMH information
•Specify and ship your device to Tolomatic for factory
installation
MOTOR ORIENTATION
YOU CAN CHOOSE:
•In-line option directly couples the driving shaft
and is a one-piece housing construction for
optimum alignment and support of the motor
•Reverse-parallel option minimizes the overall
length and offers a 1:1 or 2:1 belt ratio
INTERNAL MAGNETS
•Standard feature that allows
sensor installation on the
open side or bottom of the
extrusion
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
6. 6 1.800.328.21746 1.800.328.21746 1.800.328.21746 1.800.328.21746 1.800.328.2174
P PROFILED RAIL Endurance Technology features are
designed for maximum durability to
provide extended service life.
INTERNAL MAGNETS
•Standard feature that allows
sensor installation on the
open side or bottom of the
extrusion
INCH OR
METRIC
MOUNTING
•Your choice of
inch (US standard) or
metric mounting to
the carrier
CAGED BALL®
BEARINGS
•THK® Caged Ball® bearings are
used to reduce friction and extend
actuator life
•Caged Ball® technology creates a
grease pocket between ball elements,
reducing friction, noise and maintenance
•Large permissible moment loads
•High speed operation, low heat
generation
•High precision, smooth, low friction
motion
DUST WIPER
•Formed end cap and
side dust wipers keep
contaminants from entering
the actuator’s internal area
STAINLESS STEEL BAND
•Exterior dust band made
of fatigue resistant
stainless steel
STAINLESS STEEL IS
DURABLE, FLEXIBLE AND
CORROSION RESISTANT
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
7. www.tolomatic.com/mxe 7www.tolomatic.com/mxe 7www.tolomatic.com/mxe 7www.tolomatic.com/mxe 7
…MAXIMUM DURABILITY
OPTIONS
AUXILIARY CARRIER DC
• 2X higher Fz (load) capacity
• High bending moment capacity
TUBE CLAMPS TC
•Used for intermediate support
•Flush with bottom of actuator
to retain low profile
•Drop-in, adjustable mounting locations
(MXE16 uses T-nuts with Mounting Plates)
MOUNTING PLATES MP
•To provide clearance for motor and mount
•Use in conjunction with tube clamps
SWITCHES
•Wide variety of sensing choices: Reed, Solid
State PNP or NPN, all available normally open
or normally closed
•Flush mount, drop-in installation
•Bright LEDs, power & signal indication
•CE rated, RoHS compliant
NOTE: Boxed letters
indicate ordering codes
NON-WEAR BAND RETENTION
•Magnetically retained band is not
subject to wear as are mechanically
retained systems
•Immediate band engagement and
release results in less drag on carrier
for lower friction force during initial carrier
movement
LOW CARRIER HEIGHT
•Reduces overall actuator envelope
•Large mounting pattern for high load stability
YOUR MOTOR HERE
YOU CAN CHOOSE:
•Motor or gearbox supplied and installed by Tolomatic
•Specify the device to be installed and actuator
ships with proper mounting hardware - MXE is a
“Your Motor Here” actuator for easy in-line motor
installation. Check our website (www.tolomatic.com/
ymh) for complete YMH information
•Specify and ship your device to Tolomatic for factory
installation
MOTOR ORIENTATION
YOU CAN CHOOSE:
•In-line option directly couples the driving shaft
and is a one-piece housing construction for
optimum alignment and support of the motor
•Reverse-parallel option minimizes the overall
length and offers a 1:1 or 2:1 belt ratio
MULTIPLE SCREW TECHNOLOGIES
YOU CAN CHOOSE:
•Solid nuts of engineered resins
offer quiet performance at the
lowest cost - 5 choices
•Ball nuts offer positioning
accuracy and repeatability
with longer life, low-backlash
available - 3 choices
RETAINED DUST BAND
•Retained dust band keeps
contaminants from entering
the actuator interior, protecting
components for reduced
maintenance and increased uptime
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
8. 8 1.800.328.21748 1.800.328.21748 1.800.328.2174
HUB MULTI-AXIS MOTION HUB WITH I/O
BOB BREAK OUT BOARD
MRS STEPPER SYSTEM
STEPPER MOTORS
NEMA 23-Frame and 34-Frame MRS Stepper Motors
STEPPER DRIVE AND
CONTROLLER
The DS [STAC6-S] & SI [STAC6-Si]
represent the latest developments in
stepper drive technology, incorporating
features that derive the highest
performance from today’s stepper
motors. Anti-resonance and waveform
damping control algorithms provide
excellent performance.
• Current Output 0.5 to 6.0 A
• 90-135 VAC Input
• 167V Bus
• Set-up and configuration software
• Configurable idle current reduction
• External control options
• Pulse and direction
• Analog command signal
• Host command via RS232/485
• Integral control options -
Si ProgrammerTM
- intuitive easy-to-use
graphical programming language
•Designed for
increased torque
and acceleration
rates over a wider
speed range
•Standard NEMA
frame sizes
(23 and 34)
MMI OPERATOR INTERFACE
• Networks Stepper products
for multi-axis motion
applications.
STEPPER ACCESSORIES
• Connects the I/O points of the
DS [STAC6-S] &
SI [STAC6-Si]
• Allows visual setup of the
panel to show a particular
action taking place, or to
prompt the user to make a
decision or provide information
such as move distance, move
speed, repeat count.
• Speeds up to 3,000 RPM
• High resolution (up to 51,200 steps per rev)
• Holding torque to 1845 oz-in (13.03 Nm)
• 2000 line Quadrature encoder option
• 10 ft. power cables with connector
pre-wired
DS
[ ]
SI
[ ]
! !
• ANTI-RESONANCE
Achieves higher speeds and better
torque utilization
! Please note the Tolomatic ordering codes. Use these codes when ordering stepper components from Tolomatic
(Applied Motion Products model equivalents appear in [brackets])
• COMMAND SIGNAL SMOOTHING
Soften effect of changes in velocity
and direction
• MICROSTEP EMULATION
Smooth, high resolution motion
across range of speeds
• TORQUE RIPPLE SMOOTHING
Adjusts current waveform to reduce
low speed torque ripple, providing
smoother motion at low speeds
• SELF TEST Measure motor
parameters automatically to
optimize system performance
ADD YOUR MOTION CONTROL SYSTEM TO THE MXE or
INDUSTRY
STANDARD
MOUNTING
HYBRID
MOTOR
DESIGN
LATEST IN
MICROSTEPPING
TECHNOLOGY
9. www.tolomatic.com/mxe 9www.tolomatic.com/mxe 9
MRV SERVO SYSTEM
DIGITAL SERVO DRIVE
AND CONTROLLER
Designed by Tolomatic, the Axiom+ PV
combines the functions of a servo drive,
motion controller and programmable logic
controller in a single package. Our all-
in-one design eliminates the confusion
of multiple software packages, removes
discrete wiring or network programming
between controllers, and simplifies
application programming.
The free Windows®
-based software
package programs the PLC functions in
a standard ladder logic environment and
the motion control functions in a simple
graphical motion editor.
SERVO MOTORS
The MRV series of brushless servo
motors is available in a wide range of
torque outputs to meet your demanding
applications. These motors are designed
for precision motion profiles, low inertia,
maximum power density and long
continuous life.
SPECIFICATIONS:
TORQUE Max. Rotor
Cont. Peak Speed Inertia
(lb-in) (lb-in) (RPM) (lb-in2
)
MRV11 3 12 5000 0.02
MRV21 4 11 6000 0.05
MRV22 8 22 6000 0.10
MRV23 11 33 6000 0.14
MRV24 15 47 6000 0.19
MRV31 17 85 6000 0.38
MRV32 30 150 6000 0.69
MRV33 44 220 6000 1.00
MRV51 80 240 3000 2.53
SPECIFICATIONS:
PV10 PV20 PV30
Input Line 95 - 250 VAC, 1Ø or 3Ø
Input Hz 47 - 63 Hz
Output Current Peak (Apeak) 10 20 30
Output Current Cont (Acont) 5 10 15
Output Power Cont (kW) 1.4 2.8 4.2
Discrete Inputs 15, optically isolated 5-25VDC
Discrete Outputs 8, optically isolated 5-25VDC
Analog Inputs 1, 14-bit Differential ±10VDC
•1000 line quadrature industry standard
incremental encoder feedback
•Standard NEMA
frame sizes
(17, 23, 34 and 56) •Thermistor provides
over temperature
protection
•IP65 rated
SELECT A COMPLETE SYSTEM FROM TOLOMATIC
• FLUX VECTOR CURRENT CONTROL
Provides closed loop motor control
of torque producing current by
sensing motor current in each
individual motor phase. This gives
a high bandwidth torque response
over the full speed range with high
efficiency and minimal phase lag
• PLUGGABLE SCREW TERMINAL BLOCKS
Allows easier termination, quick
connection or removal of wiring and
direct access to signals for testing
with a meter
• MODBUS RTU COMMUNICATIONS
Standard Modbus RTU is built
into the drive for communications
to other controllers or operator
interfaces
• AMPLIFIER ONLY OPTION
The DV version is for use with an
external controller that provides
analog velocity, analog torque or
step commands
HIGH RESOLUTION ENCODER
INDUSTRY
STANDARD
MOUNTING
INTEGRAL
PROTECTION
INNOVATIVE
SERVO
TECHNOLOGY
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
10. 10 1.800.328.217410 1.800.328.217410 1.800.328.2174
The above ratings are the maximum values for shock-free, vibration-
free operation in a typical industrial environment, which must not be
exceeded even in dynamic operation. Contact Tolomatic for assistance
in selecting the most appropriate actuator for your application. =
Mxmax
LF
Mx +
Mymax
My +
Mzmax
Mz +
Fymax
Fy + < 1
Fzmax
Fz
With combined loads, LF
must not exceed the value 1.
Ratings were calculated with the following conditions:
1.) Coupling between carriers is rigid.
2.) Load is equally distributed between carriers.
STANDARD CARRIER
S SOLID BEARING MOMENT AND LOAD CAPACITY
*At minimum “D” distance see graph below for complete information
DC AUXILIARY CARRIER
3.) Coupling device applies no
misalignment loads to carriers.
AUXILIARY CARRIER BENDING
MOMENTS WITH INCREASED “D”
DISTANCE BETWEEN CARRIERS
“D”DISTANCE BETWEEN
CARRIERS
“D”DISTANCE BETWEEN
CARRIERS
SIZE
MAXIMUM BENDING MOMENTS MAX. LOAD
Mx My Mz Fz
in-lbs N-m in-lbs N-m in-lbs N-m lbf N
16 22 2.5 19 2.1 25 2.8 35 156
25 60 6.8 110 12.4 34 3.8 70 311
32 100 11.3 350 39.5 140 15.8 150 667
40 275 31.1 600 67.8 220 24.9 225 1,001
50 315 35.6 1,155 131.0 341 38.5 315 1,401
63 585 66.1 2,340 264.0 520 58.8 520 2,313
SIZE
“D”
MINIMUM
MAXIMUM BENDING MOMENTS* MAX. LOAD
Mxa Mya Mza Fza
in mm in-lbs N-m in-lbs N-m in-lbs N-m lbf N
16 5.0 127 44 5.0 175 19.8 175 19.8 70 311
25 6.0 152 120 13.6 420 47.5 420 47.5 140 623
32 7.0 178 200 22.6 1,050 119.0 1,050 119.0 300 1,334
40 8.5 216 550 62.1 1,913 216.0 1,913 216.0 450 2,002
50 8.6 218 630 71.2 2,709 306.0 2,709 306.0 630 2,802
63 13.0 330 1,170 132.0 6,760 764.0 6,760 764.0 1,040 4,626
30
25
20
15
10
5
700
600
500
400
300
200
0 2,500
2500 500 750 1,000 1,250 1,500 1,750
5,000 7,500 10,000
Mya & Mza MOMENT (in-lbs)
Mya & Mza MOMENT (N-m)
DISTANCEBETWEEN
CARRIERS(in)
DISTANCEBETWEEN
CARRIERS(mm)
12,500 15,000
16
25 32
40
16
25 32
40
5050
6363
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
11. www.tolomatic.com/mxe 11www.tolomatic.com/mxe 11
STANDARD CARRIER
*At minimum “D” distance see below for complete information
P PROFILED RAIL MOMENT AND LOAD CAPACITY
DC AUXILIARY
CARRIER
The above ratings are the maximum values for shock-free, vibration-
free operation in a typical industrial environment, which must not be
exceeded even in dynamic operation. Contact Tolomatic for assistance
in selecting the most appropriate actuator for your application. =
Mxmax
LF
Mx +
Mymax
My +
Mzmax
Mz +
Fymax
Fy + < 1
Fzmax
Fz
With combined loads, LF
must not exceed the value 1.
Ratings were calculated with the following conditions:
1.) Coupling between carriers is rigid.
2.) Load is equally distributed between carriers.
3.) Coupling device applies no
misalignment loads to carriers.
AUXILIARY CARRIER BENDING
MOMENTS WITH INCREASED “D”
DISTANCE BETWEEN CARRIERS
“D”DISTANCE BETWEEN
CARRIERS
“D”DISTANCE BETWEEN
CARRIERS
SIZE
MAXIMUM BENDING MOMENTS MAXIMUM LOAD
Mx My Mz Fy Fz
in-lbs N-m in-lbs N-m in-lbs N-m lbf N lbf N
16 39 4.5 339 38.3 339 38.3 217 966 217 966
25 126 14.3 502 56.7 377 42.6 449 1,996 449 1,996
32 226 25.6 1,344 152.0 1,344 152.0 569 2,531 569 2,531
40 604 68.2 1,913 216.0 1,913 216.0 736 3,274 736 3,274
50 811 91.7 3,483 394.0 3,483 394.0 1,014 4,510 1,014 4,510
63 1,019 115.0 5,339 603.0 5,339 603.0 1,292 5,745 1,292 5,745
Mating surface of mounted component must maintain a flatness of at least .0015" [0.040mm]
SIZE
“D”
MINIMUM
MAXIMUM BENDING MOMENTS* MAXIMUM LOAD
Mxa Mya Mza Fya Fza
in mm in-lbs N-m in-lbs N-m in-lbs N-m lbf N lbf N
16 5.0 127 79 8.9 620 70.0 620 70.0 434 1,932 434 1,932
25 6.0 152 252 28.5 1,610 182 1,610 182 898 3,993 898 3,993
32 7.0 178 453 51.1 2,202 249 2,202 249 1,138 5,063 1,138 5,063
40 8.5 216 1,208 136.0 3,601 407 3,601 407 1,472 6,549 1,472 6,549
50 8.6 218 1,623 183.0 4,966 561 4,966 561 2,028 9,020 2,028 9,020
63 13.0 330 2,038 230.0 9,508 1,074 9,508 1,074 2,583 11,490 2,583 11,490
30
25
20
15
10
5
700
600
500
400
300
200
0 10,0005,000
1,0000 2,000 3,000500 1,500 2,500
20,000 25,00015,000 30,000
Mya & Mza MOMENT (in-lbs)
Mya & Mza MOMENT (N-m)
DISTANCEBETWEEN
CARRIERS(in)
DISTANCEBETWEEN
CARRIERS(mm)
16
25 3232
40
5050
16
25
40
6363
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
12. IP Rating - 44 Approximately equivalent to the requirements of IP44
(protected against ingress of solid particles greater than .039 in (1 mm) and splashing water)
12 1.800.328.217412 1.800.328.217412 1.800.328.2174
ACTUATOR
SERIES
SCREW
DIAMETER
SCREW
TYPE
SCREW
PITCH
BREAKAWAY TORQUE
SINGLE
CARRIER
AUXILIARY
CARRIER
in mm rev/in oz-in N-m oz-in N-m
MXE16 0.250 6.35 SN 02 10 0.071 14 0.099
0.250 6.35 SN 04 10 0.071 14 0.099
0.250 6.35 SN 16 10 0.071 14 0.099
MXE25 0.375 9.53 BN 08 16 0.113 18 0.127
0.375 9.53 BNL 08 16 0.113 18 0.127
0.500 12.70 SN 01 30 0.212 46 0.325
0.500 12.70 SN 02 25 0.177 35 0.247
0.500 12.70 SN 05 18 0.127 22 0.155
MXE32 0.375 9.53 BN 08 16 0.113 18 0.127
0.375 9.53 BNL 08 16 0.113 18 0.127
0.500 12.70 SN 01 30 0.212 46 0.325
0.500 12.70 SN 02 25 0.177 35 0.247
0.500 12.70 SN 05 18 0.127 22 0.155
MXE40 0.500 12.70 BN 02 28 0.198 35 0.247
0.500 12.70 BNL 02 28 0.198 35 0.247
0.625 15.88 BN 05 35 0.247 45 0.318
0.625 15.88 BNL 05 35 0.247 45 0.318
0.625 15.88 SN 02 35 0.245 44 0.311
0.750 19.05 SN 01 50 0.353 72 0.508
MXE50 0.750 19.05 BN 02 40 0.282 50 0.353
0.750 19.05 BNL 02 40 0.282 50 0.353
0.750 19.05 BN 05 35 0.247 45 0.318
0.750 19.05 BNL 05 35 0.247 45 0.318
0.750 19.05 SN 01 50 0.353 72 0.508
0.750 19.05 SN 02 35 0.247 44 0.311
MXE63 1.000 25.40 BN 01 75 0.530 107 0.756
1.000 25.40 BNL 01 75 0.530 107 0.756
1.000 25.40 BN 02 75 0.530 107 0.756
1.000 25.40 BNL 02 75 0.530 107 0.756
1.000 25.40 BN 04 85 0.600 121 0.855
1.000 25.40 BNL 04 85 0.600 121 0.855
1.000 25.40 SN 04 75 0.530 107 0.756
BREAKAWAY TORQUEFRICTION FORCE S-ACTUATORS
350
300
250
200
150
100
50
0
1500
1250
1000
750
500
250
0
0
5
10
15
20
25
30
35
40
45
0
25
50
75
100
125
150
175
200
FRICTION FORCE (lbf)
FRICTION FORCE (N)
LOADWEIGHT(lbf)
LOADWEIGHT(N)
32
5050
25
40
32
25
40
6363
1616
S & P ACTUATOR SPECIFICATIONS AND BREAKAWAY TORQUE
CARRIER WEIGHT
(including nut bracket
assembly)
BASE ACTUATOR WEIGHT
(excluding nut bracket and
carrier assembly)
WEIGHT PER UNIT
OF STROKE STRAIGHTNESS /
FLATNESS*
TEMPERATURE
RANGE
ACTUATOR
SERIES
S SOLID P PROFILED S SOLID P PROFILED S SOLID P PROFILED
lb kg lb kg lb kg lb kg lb/in kg/mm lb/in kg/mm in mm °F °C
MXE16 0.47 0.21 0.58 0.26 1.24 0.56 1.43 0.65 0.10 0.0018 0.12 0.0021
.00067 x L†
.0170 x L†
40
to
130
4
to
54
MXE25 0.91 0.41 1.02 0.46 2.11 0.96 2.44 1.11 0.19 0.0034 0.25 0.0045
MXE32 1.74 0.79 2.12 0.96 2.74 1.24 3.30 1.50 0.29 0.0052 0.37 0.0066
MXE40 3.15 1.43 3.72 1.69 5.34 2.42 6.88 3.12 0.40 0.0071 0.58 0.0104
MXE50 5.27 2.39 6.97 3.16 14.91 6.76 18.27 8.29 0.64 0.0114 0.84 0.0150
MXE63 12.96 5.88 25.54 11.58 35.05 15.90 39.34 17.84 1.08 0.0193 1.36 0.0243
GENERAL ACTUATOR SPECIFICATIONS
*Actuator mounted on a flat surface and fully restrained
(See tube clamp graphs page 15)
†
L = Maximum distance between supports
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
26. 26 1.800.328.217426 1.800.328.217426 1.800.328.2174
S-SOLID BEARING ACTUATOR DIMENSIONS
B
STROKE
A
N
O
O
P
Q
Q
R
S
T
U
Y
N P
Q
Q
R
S
T
U
Y
D
E
F
Z Z
G
H
J
K
L
M
D
E
F
G
K
V
X
X
M
WL
C
C
HEAD MOUNTING HOLES
16
HEAD MOUNTING HOLES
25, 32
HEAD MOUNTING HOLES
40, 50, 63
MOUNTING PATTERN
16, 25, 32, 50
MOUNTING PATTERN
40, 63
I
STROKE
+
A
+
B
F
J
K
H
E
J G
D
L
M
MXE16 MXE25 MXE32 MXE40 MXE50 MXE63
A 2.72 3.79 3.97 4.93 5.58 8.32
mm 69.1 96.3 100.9 125.2 141.7 211.3
B 2.84 3.96 4.14 5.12 5.82 8.51
mm 72.1 100.6 105.1 130 147.8 216.2
C 0.50 0.92 0.50 0.63 1.31 1.88
mm 12.7 23.4 12.7 16 33.3 47.8
D 1.66 2.25 2.18 2.99 3.47 4.33
mm 42.2 57.2 55.4 75.9 88.1 110.0
E 1.89 2.30 3.06 3.51 4.44 5.50
mm 48.0 58.4 77.8 89.2 112.8 139.7
F 1.58 2.18 2.86 3.47 4.10 5.59
mm 40.1 55.4 72.6 88.2 104.1 142.0
G 0.83 0.95 1.21 1.54 1.82 2.30
mm 21.1 24.1 30.7 39.1 46.2 58.4
H 1.38 1.87 1.87 - - -
mm 35.1 47.5 47.5 - - -
I 0.32 0.30 0.30 - - -
mm 8.1 7.6 7.6 - - -
J 0.66 1.01 1.01 - - -
mm 16.8 25.7 25.7 - - -
K 1.31 Ø1.30 Ø1.30 Ø2.19 Ø2.69 Ø3.01
mm 33.3 Ø33.0 Ø33.0 Ø55.6 Ø68.3 Ø76.5
L M3x0.5
(4)
M5x0.8
(8)
M5x0.8
(8)
M6x1.0
(4)
M6x1.0
(4)
M6x1.0
(4)
mm
M3x0.5
(4)
M5x0.8
(8)
M5x0.8
(8)
M6x1.0
(4)
M6x1.0
(4)
M6x1.0
(4)
M Ø.188
(2)
Ø.158
(2)
Ø.158
(2)
Ø.189
(2)
Ø.188
(2)
Ø.188
(2)
mm
Ø4.78
(2)
Ø4.01
(2)
Ø4.01
(2)
Ø4.80
(2)
Ø4.78
(2)
Ø4.78
(2)
N 4.12 5.31 6.02 7.87 7.91 12.11
mm 104.6 134.9 153 200 200.9 307.6
O 1.18 1.57 1.77 - 1.88 -
mm 30.0 39.9 45 - 47.8 -
P - 1.00 1.00 1.00 2.50 3.00
mm - 25.4 25.4 25.4 63.5 76.2
Q - 1.07 1.10 1.63 1.25 1.50
mm - 27.2 28 41.3 31.8 38.1
R - 1/4-20
(2)
1/4-20
(2)
1/4-20
(2)
3/8-16
(2)
3/8-16
(2)
mm
- M6x1.0
(2)
M8x1.25
(2)
M8x1.25
(2)
M10x1.5
(2)
M10x1.5
(2)
S - #10-32
(2)
1/4-20
(2)
5/16-18
(2)
3/8-16
(2)
3/8-16
(2)
mm
- M6x1.0
(2)
M8x1.25
(2)
M8x1.25
(2)
M10x1.5
(2)
M10x1.5
(2)
T #8-32
(6)
1/4-20
(6)
1/4-20
(6)
5/16-18
(8)
3/8-16
(6)
3/8-16
(8)
mm
M4x0.7
(6)
M6x1.0
(6)
M8x1.25
(6)
M8x1.25
(8)
M10x1.5
(6)
M10x1.5
(8)
U 1.18 1.18 1.73 2.00 2.59 3.25
mm 30.0 30.0 44.0 51.0 65.8 82.6
V - - - Ø2.49 Ø3.01 Ø3.01
mm - - - Ø63.2 Ø76.5 Ø76.5
W - - - M5x0.8
(4)
M5x0.8
(4)
M5x0.8
(4)
mm
- - - M5x0.8
(4)
M5x0.8
(4)
M5x0.8
(4)
X - - - 15° 15° 15°
mm - - - 15° 15° 15°
Y (Shaft length) MXE16 MXE25 MXE32 MXE40 MXE50 MXE63
LMI 0.64 0.55 0.55 0.69 1.35 1.35
mm 16.3 14.0 14.0 17.5 34.3 34.3
17 FRAME RP 0.87 - - - - -
mm 22.1 - - - - -
23 FRAME RP - 1.99 1.99 1.99 2.10 1.92
mm - 50.5 50.5 50.5 53.3 48.8
34 FRAME RP - 2.20 2.20 2.20 2.10 1.92
mm - 55.9 55.9 55.9 53.3 48.8
56 FRAME RP - - - - - 1.92
mm - - - - - 48.8
Z (Shaft dia.) MXE16 MXE25 MXE32 MXE40 MXE50 MXE63
LMI (BN02) 0.156 0.25 0.25 0.312 0.5 –
mm 3.96 6.35 6.35 7.92 12.70 –
LMI (all others) 0.156 0.25 0.25 0.393 0.5 0.5
mm 3.96 6.35 6.35 9.98 12.70 12.70
RP (BN02) 0.156 0.25 0.25 0.25 0.5 0.5
mm 3.96 6.35 6.35 6.35 12.70 12.70
RP (all others) 0.156 0.25 0.25 0.375 0.5 0.5
mm 3.96 6.35 6.35 9.53 12.70 12.70
27. www.tolomatic.com/mxe 27www.tolomatic.com/mxe 27
S-SOLID BEARING OPTION DIMENSIONS
D
MINIMUM
DISTANCE
BETWEEN
CARRIERS
B
STROKE
A
C
E F
N
O
K
J
STROKE
+
A
+
B
+
D
M
L
G
H
MXE16S MXE25S MXE32S MXE40S MXE50S MXE63S
A 2.72 3.79 3.97 4.93 5.58 8.32
mm 69.1 96.3 100.9 125.2 141.7 211.3
B 2.84 3.96 4.14 5.12 5.82 8.51
mm 72.1 100.6 105.1 130 147.8 216.2
AUXILIARY CARRIER
D 5.00 6.00 7.00 8.50 8.60 13.00
mm 127.0 152.4 177.8 215.9 218.4 330.2
FLOATING MOUNT
C 1.86 2.52 3.37 4.32 5.04 6.10
mm 47.2 64.1 93.3 109.7 128.0 154.9
E 0.98 1.25 2.76 3.94 3.94 5.00
mm 24.9 31.8 70.1 100.0 100.0 127.0
F 0.47 0.63 1.97 2.95 3.15 3.94
mm 11.9 15.9 50.0 74.9 80.0 100.1
G - - - 2.17 - 2.76
mm - - - 55.1 - 70.1
H* Ø.18 (2) Ø.24 (2) Ø.28 (2) Ø.28 (4) Ø.36 (2) Ø.34 (4)
mm Ø4.6 (2) Ø6.1 (2) Ø7.1 (2) Ø7.1 (4) Ø9.1 (2) Ø8.6 (4)
I 2.28 2.80 3.67 4.26 5.24 6.17
mm 57.9 71.0 93.3 108.2 133.1 156.7
MOUNTING PLATE/TUBE CLAMP KITS
J** 0.50 1.00 0.75 0.63 1.25 1.00
mm 12.7 25.4 19.1 16.0 31.8 25.4
J*** - 1.38 1.13 1.00 1.25 1.00
mm - 35.1 28.7 25.4 31.8 25.4
K 0.83 0.95 1.21 1.54 1.82 2.30
mm 21.1 24.1 30.7 39.1 46.2 58.4
L 2.50 4.00 5.00 5.00 5.60 8.00
mm 63.5 101.6 127.0 127.0 142.2 203.2
M 1.88 3.39 4.25 4.41 5.00 7.00
mm 47.8 86.0 108.0 112.0 127.0 177.8
N 1.00 1.00 1.00 0.79 0.79 1.00
mm 25.4 25.4 25.4 20.0 20.0 25.4
O Ø.22 (2) Ø.22 (2) Ø.28 (2) Ø.28 (2) Ø.28 (2) Ø.42 (2)
mm Ø5.6 (2) Ø5.6 (2) Ø7.1 (2) Ø7.1 (2) Ø7.1 (2) Ø10.7 (2)
* MXE16, MXE25, MXE32 & MXE50 USE 2 CENTER HOLES, MXE40 & MXE63 USE 4 CORNER HOLES
** MOUNTING PLATE THICKNESS FOR 23 FRAME MOTORS (17 FRAME MOTORS ON MXE16)
*** MOUNTING PLATE THICKNESS FOR 34 FRAME MOTORS (AND 56 FRAME MOTORS ON MXE63)
NOTE: MXE16
uses MP
(mounting plate)
with included T-nuts
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
28. 28 1.800.328.217428 1.800.328.217428 1.800.328.2174
P-PROFILED RAIL ACTUATOR DIMENSIONS
B
STROKE
A
C
C
N
O
O
P
Q
R
X
DE
F
G
K
LM
T
UU
S
NV
O
O
Q
R
MOUNTING PATTERN
16, 25
DE
F
G
H
J
K
L
W
V
W
X
STROKE
+
A
+
B
MOUNTING PATTERN
32, 40, 50, 63
HEAD MOUNTING HOLES
40, 50, 63
HEAD MOUNTING HOLES
25, 32 HEAD MOUNTING HOLES
16
M
Z
Z
I
F
J
KHE
J
G
D
L
M
MXE16 MXE25 MXE32 MXE40 MXE50 MXE63
A 2.72 3.79 3.97 4.93 5.58 8.32
mm 69.1 96.3 100.9 125.2 141.7 211.3
B 2.84 3.96 4.14 5.12 5.82 8.51
mm 72.1 100.6 105.1 130.0 147.8 216.2
C 0.50 0.92 0.50 0.63 1.31 1.88
mm 12.7 23.4 12.7 16.0 33.3 47.8
D 1.66 2.25 2.18 2.99 3.47 4.33
mm 42.2 57.2 55.4 75.9 88.0 110.0
E 2.05 2.60 3.05 3.77 4.90 5.71
mm 52.1 66.1 77.4 95.7 124.5 145.0
F 1.80 2.65 3.25 3.85 4.62 5.65
mm 45.7 67.4 82.6 97.8 117.3 143.5
G 0.83 0.95 1.21 1.54 1.82 2.30
mm 21.1 24.1 30.7 39.1 46.2 58.4
H 1.38 1.87 1.87 - - -
mm 35.1 47.5 47.5 - - -
I 0.32 0.30 0.30 - - -
mm 8.1 7.6 7.6 - - -
J 0.66 1.01 1.01 - - -
mm 16.8 25.7 25.7 - - -
K 1.31 Ø1.30 Ø1.30 Ø2.19 Ø2.69 Ø2.19
mm 33.3 Ø33.0 Ø33.0 Ø55.6 Ø68.3 Ø55.6
L M3x0.5
(4)
M5x0.8
(8)
M5x0.8
(8)
M6x1.0
(4)
M6x1.0
(4)
M6x1.0
(4)
mm
M3x0.5
(4)
M5x0.8
(8)
M5x0.8
(8)
M6x1.0
(4)
M6x1.0
(4)
M6x1.0
(4)
M Ø.188
(2)
Ø.158
(2)
Ø.158
(2)
Ø.189
(2)
Ø.188
(2)
Ø.188
(2)
mm
Ø4.78
(2)
Ø4.01
(2)
Ø4.01
(2)
Ø4.80
(2)
Ø4.78
(2)
Ø4.78
(2)
N 4.33 5.31 6.69 7.87 8.50 12.11
mm 110.0 135.0 170.0 200 215.9 207.6
O 1.58 1.57 1.07 1.00 1.00 1.57
mm 40.0 40.0 27.2 25.4 25.4 39.9
P - - 3.37 4.50 2.75 5.12
mm - - 85.6 114.3 69.9 130.0
Q #8-32
(6)
1/4-20
(6)
5/16-18
(8)
5/16-18
(8)
5/16-18
(8)
3/18-16
(8)
mm
M4x0.7
(6)
M6x1.0
(6)
M8x1.25
(8)
M8x1.25
(8)
M8x1.25
(8)
M10x1.5
(8)
R 1.10 1.57 1.97 2.84 3.13 3.87
mm 28.0 40.0 50.0 72.1 79.5 98.3
S - - - Ø2.49 Ø3.01 Ø3.01
mm - - - Ø63.2 Ø76.5 Ø76.5
T - - - M5x0.8
(4)
M5x0.8
(4)
M5x0.8
(4)
mm
- - - M5x0.8
(4)
M5x0.8
(4)
M5x0.8
(4)
U - - - 15° 15° 15°
mm - - - 15° 15° 15°
V 1.58 1.58 1.77 2.50 1.50 2.56
mm 40.0 40.0 45.0 63.5 38.1 65.0
W 5/32 1/4 5/16 5/16 5/16 3/8
mm M4 M6 M8 M8 M8 M8
X (Shaft length) MXE16 MXE25 MXE32 MXE40 MXE50 MXE63
LMI 0.64 0.55 0.55 0.69 1.35 1.35
mm 16.3 14 14 17.5 34.3 34.3
17 FRAME RP 0.87 - - - - -
mm 22.1 - - - - -
23 FRAME RP - 1.99 1.99 1.99 2.10 1.92
mm - 50.5 50.5 50.5 53.3 48.8
34 FRAME RP - 2.2 2.2 2.2 2.10 1.92
mm - 55.9 55.9 55.9 53.3 48.8
56 FRAME RP - - - - - 1.92
mm - - - - - 48.8
Z (Shaft dia.) MXE16 MXE25 MXE32 MXE40 MXE50 MXE63
LMI (BN02) 0.156 0.25 0.25 0.312 0.5 –
mm 3.96 6.35 6.35 7.92 12.70 –
LMI (all others) 0.156 0.25 0.25 0.393 0.5 0.5
mm 3.96 6.35 6.35 9.98 12.70 12.70
RP (BN02) 0.156 0.25 0.25 0.25 0.5 0.5
mm 3.96 6.35 6.35 6.35 12.70 12.70
RP (all others) 0.156 0.25 0.25 0.375 0.5 0.5
mm 3.96 6.35 6.35 9.53 12.70 12.70
29. www.tolomatic.com/mxe 29www.tolomatic.com/mxe 29
P-PROFILED RAIL OPTION DIMENSIONS
G
I
J
B
STROKE
A
C
E
F
D
MINIMUM
DISTANCE
BETWEEN
CARRIERS
STROKE
+
A
+
B
+
D
H
MXE16S MXE25S MXE32S MXE40S MXE50S MXE63S
A 2.72 3.79 3.97 4.93 5.58 8.32
mm 69.1 96.3 100.9 125.2 141.7 211.3
B 2.84 3.96 4.14 5.12 5.82 8.51
mm 72.1 100.6 105.1 130 147.8 216.2
AUXILIARY CARRIER
D 5.00 6.00 7.00 8.50 8.60 13.00
mm 127.0 152.4 177.8 215.9 218.4 330.2
MOUNTING PLATE/TUBE CLAMP KITS
C* 0.50 1.00 0.75 0.63 1.25 1.00
mm 12.7 25.4 19.1 16.0 31.8 25.4
C** - 1.38 1.13 1.00 1.25 1.00
mm - 35.1 28.7 25.4 31.8 25.4
E 2.05 2.60 3.05 3.77 1.90 5.71
mm 52.1 66.1 77.4 95.7 124.5 145.0
F 0.83 0.95 1.21 1.54 1.82 2.30
mm 21.1 24.1 30.7 39.1 46.2 58.4
G 2.50 4.00 5.00 5.00 5.60 8.00
mm 63.5 101.6 127.0 127.0 142.2 203.2
H 1.88 3.39 4.25 4.41 5.00 7.00
mm 47.8 86.0 108.0 112.0 127.0 177.8
I 1.00 1.00 1.00 0.79 0.79 1.00
mm 25.4 25.4 25.4 20.0 20.0 25.4
J Ø.22 (2) Ø.22 (2) Ø.28 (2) Ø.28 (2) Ø.28 (2) Ø.42 (2)
mm Ø5.6 (2) Ø5.6 (2) Ø7.1 (2) Ø7.1 (2) Ø7.1 (2) Ø10.7 (2)
* MOUNTING PLATE THICKNESS FOR 23 FRAME MOTORS (17 FRAME MOTORS ON MXE16)
** MOUNTING PLATE THICKNESS FOR 34 FRAME MOTORS (AND 56 FRAME MOTORS ON MXE63)
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
30. 30 1.800.328.217430 1.800.328.217430 1.800.328.2174
A
B
C
C
E
E
F
F
G
H
D
J
K
MRV11
A Ø1.18
mm Ø30.0
B 1.376
mm 34.95
C 0.316
mm 8.03
D Ø1.855 BC
mm Ø47.12 BC
E 1.656
mm 42.06
F 0.828
mm 21.03
G Ø.154 (4)
mm Ø3.91 (4)
H Ø.1885/.1895 x
.16 DP (2)
mm Ø4.788/4.813 x
4.1 DP (2)
I 0.45
mm 11.4
J 0.30
mm 7.6
K 1.85
mm 47.0
L Ø 1.810 BC
mm Ø 45.97 BC
M Ø.170 THRU (4)
mm 4.32 THRU (4)
N O
M
A
L
P
J
K
B
F
C
D
E
G
A
H
MRV2x MRS2x MRS3x
A Ø1.46 Ø1.46 Ø1.46
mm Ø37.1 Ø37.1 Ø37.1
B 1.870 1.870 1.870
mm 47.50 47.50 47.50
C .800 .800 .800
mm 20.32 20.32 20.32
D 1.010 1.010 1.010
mm 25.65 25.65 25.65
E 2.06 2.06 2.06
mm 52.3 52.3 52.3
F .298 .298 .298
mm 7.57 7.57 7.57
G Ø.1555/.1560 x .23 DP (2) Ø.1555/.1560 x .23 DP (2) Ø.1555/.1560 x .23 DP (2)
mm Ø3.948/3.961 x 5.8 DP (2) Ø3.948/3.961 x 5.8 DP (2) Ø3.948/3.961 x 5.8 DP (2)
H Ø.22 THRU (4) Ø.22 THRU (4) Ø.22 THRU (4)
mm Ø5.7 THRU (4) Ø5.7 THRU (4) Ø5.7 THRU (4)
I 2.38 2.38 2.38
mm 60.5 60.5 60.5
J 2.49 1.93 2.37
mm 63.2 49.0 60.2
K 1.34 1.34 1.34
mm 34.0 34.0 34.0
L 2.80 2.60 3.42
mm 71.1 66.0 86.9
M 2.80 2.60 3.25
mm 71.1 66.0 82.6
N #10-24 x 0.75 DP (4) M5X0.8 x .40 DP (4) M5X0.8 x .40 DP (4)
mm #10-24 x 19.1 DP (4) M5X0.8 x 10.2 DP (4) M5X0.8 x 10.2 DP (4)
O Ø2.625 BC Ø2.625 BC Ø3.875 BC
mm Ø66.68 BC Ø66.68 BC Ø98.43 BC
P Ø1.504 Ø1.504 Ø2.877
mm Ø38.20 Ø38.20 Ø73.08
MXE25/32
S-SOLID BEARING AND P-PROFILED RAIL IN-LINE MOTOR MOUNTING
MXE16
L
M
31. www.tolomatic.com/mxe 31www.tolomatic.com/mxe 31
S-SOLID BEARING AND P-PROFILED RAIL IN-LINE MOTOR MOUNTING
A
M
L
C
E
O
N
K
J
B
D
D
F
G
H
MRV2x MRV3x MRS2x MRS3x
A Ø1.81 Ø1.81 Ø1.81 Ø1.81
mm Ø46.0 Ø46.0 Ø46.0 Ø46.0
B Ø2.488 BC Ø2.488 BC Ø2.488 BC Ø2.488 BC
mm Ø63.20 BC Ø63.20 BC Ø63.20 BC Ø63.20 BC
C 2.488 2.488 2.488 2.488
mm 63.20 63.20 63.20 63.20
D 15° 15° 15° 15°
mm 15° 15° 15° 15°
E 2.488 2.488 - -
mm 63.20 63.20 - -
F 3.02 3.02 3.02 3.02
mm 76.7 76.7 76.7 76.7
G Ø.22 THRU (8) Ø.22 THRU (8) Ø.22 THRU (4) Ø.22 THRU (4)
mm Ø.57 THRU (8) Ø.57 THRU (8) Ø.57 THRU (4) Ø.57 THRU (4)
H Ø.1865/.1875 x .23 DP (4) Ø.1865/.1875 x .23 DP (4) Ø.1865/.1875 x .23 DP (2) Ø.1865/.1875 x .23 DP (2)
mm Ø4.737/4.763 x 5.8 DP (4) Ø4.737/4.763 x 5.8 DP (4) Ø4.737/4.763 x 5.8 DP (2) Ø4.737/4.763 x 5.8 DP (2)
I 1.53 1.56 1.52 1.56
mm 38.9 39.6 38.6 39.6
J 2.63 2.38 2.07 2.95
mm 66.8 60.5 52.6 74.9
K Ø2.625 BC Ø3.875 BC Ø2.625 BC Ø3.875 BC
mm Ø66.68 BC Ø98.43 BC Ø66.68 BC Ø98.43 BC
L Ø1.504 Ø2.879 Ø1.504 Ø2.879
mm Ø38.2 Ø73.13 Ø38.2 Ø73.13
M #10-24 x .75 DP (4) #10-24 x .75 DP (4) M5x0.8 x .41 (4) M5x0.8 x .41 (4)
mm #10-24 x 19.1 DP (4) #10-24 x 19.1 DP (4) M5x0.8 x 10.4 (4) M5x0.8 x 10.4 (4)
N 2.63 3.75 2.35 3.75
mm 66.8 95.3 59.7 95.3
O 2.63 3.95 2.35 3.95
mm 66.8 100.3 59.7 100.3
MXE40
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
32. 32 1.800.328.217432 1.800.328.217432 1.800.328.2174
S-SOLID BEARING AND P-PROFILED RAIL IN-LINE MOTOR MOUNTING
MXE50
MRV2x MRV3x, GH3x MRS2x MRS3x GH2x
A Ø2.31 Ø2.31 Ø2.31 Ø2.31 Ø2.31
mm Ø58.7 Ø58.7 Ø58.7 Ø58.7 Ø58.7
B Ø3.010 BC Ø3.010 BC Ø3.010 BC Ø3.010 BC Ø3.010 BC
mm Ø76.45 BC Ø76.45 BC Ø76.45 BC Ø76.45 BC Ø76.45 BC
C 3.010 3.010 3.010 3.010 3.010
mm 76.45 76.45 76.45 76.45 76.45
D 15° 15° 15° 15° 15°
mm 15° 15° 15° 15° 15°
E Ø3.390 Ø3.390 Ø3.390 Ø3.390 Ø3.390
mm Ø86.11 Ø86.11 Ø86.11 Ø86.11 Ø86.11
F Ø.22 THRU (4) Ø.22 THRU (4) Ø.22 THRU (4) Ø.22 THRU (4) Ø.22 THRU (4)
mm Ø5.6 THRU (4) Ø5.6 THRU (4) Ø5.6 THRU (4) Ø5.6 THRU (4) Ø5.6 THRU (4)
G .1865/.1875 x .23 DP (2) .1865/.1875 x .23 DP (2) .1865/.1875 x .23 DP (2) .1865/.1875 x .23 DP (2) .1865/.1875 x .23 DP (2)
mm 4.737/4.763 x 5.8 DP (2) 4.737/4.763 x 5.8 DP (2) 4.737/4.763 x 5.8 DP (2) 4.737/4.763 x 5.8 DP (2) 4.737/4.763 x 5.8 DP (2)
H 1.50 1.50 1.50 1.50 1.50
mm 38.1 38.1 38.1 38.1 38.1
I 3.30 3.05 2.77 3.24 3.05
mm 83.8 77.5 70.4 82.3 77.5
J Ø2.625 BC Ø3.875 BC Ø2.625 BC Ø3.875 BC Ø2.625 BC
mm Ø66.68 BC Ø98.43 BC Ø66.68 BC Ø98.43 BC Ø66.68 BC
K Ø1.504 Ø2.880 Ø1.504 Ø2.880 Ø1.504
mm Ø38.20 Ø73.15 Ø38.20 Ø73.15 Ø38.20
L M5x0.8 x .75 DP M5x0.8 x .75 DP M5x0.8 x .40 DP M5x0.8 x .51 DP M5x0.8 x .75 DP
mm M5x0.8 x 19.1 DP M5x0.8 x 19.1 DP M5x0.8 x 10.2 DP M5x0.8 x 13.0 DP M5x0.8 x 19.1 DP
M 3.00 3.95 2.69 3.95 3.00
mm 76.2 100.2 68.3 100.2 76.2
N 3.00 3.75 2.69 3.75 3.00
mm 76.2 95.3 68.3 95.3 76.2
H
M
N
D
D
B
C
E
F
G
A
J
K
L
33. www.tolomatic.com/mxe 33www.tolomatic.com/mxe 33
MXE63
S-SOLID BEARING AND P-PROFILED RAIL IN-LINE MOTOR MOUNTING
MRV2x, GH2x MRV3x, MRS3x MRV5x, GH3x
A Ø2.31 Ø2.31 Ø2.31
mm Ø58.7 Ø58.7 Ø58.7
B Ø3.010 BC Ø3.010 BC Ø3.010 BC
mm Ø76.45 BC Ø76.45 BC Ø76.45 BC
C 3.010 3.010 3.010
mm 76.45 76.45 76.45
D 15° 15° 15°
mm 15° 15° 15°
E Ø3.390 Ø3.390 Ø3.390
mm Ø86.11 Ø86.11 Ø86.11
F Ø.22 THRU (4) Ø.22 THRU (4) Ø.22 THRU (4)
mm Ø5.6 THRU (4) Ø5.6 THRU (4) Ø5.6 THRU (4)
G .1865/.1875 x .23 DP (2) .1865/.1875 x .23 DP (2) .1865/.1875 x .23 DP (2)
mm 4.737/4.763 x 5.8 DP (2) 4.737/4.763 x 5.8 DP (2) 4.737/4.763 x 5.8 DP (2)
H 1.50 1.50 1.50
mm 38.1 38.1 38.1
I 3.30 3.24 3.83
mm 83.8 82.3 97.3
J Ø2.625 BC Ø3.875 BC Ø3.875 BC
mm Ø66.68 BC Ø98.43 BC Ø98.43 BC
K Ø1.504 Ø2.880 Ø2.880
mm Ø38.20 Ø73.15 Ø73.15
L M5x0.8 x .75 DP M5x0.8 x .51 DP M5x0.8 x .75 DP
mm M5x0.8 x 19.1 DP M5x0.8 x 13.0 DP M5x0.8 x 19.1 DP
M 3.00 3.95 3.95
mm 76.2 100.2 100.2
N 3.00 3.75 3.75
mm 76.2 95.3 95.3
D
D
B
C
E
F
G
A
H
J
K
L
M
N
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
34. 34 1.800.328.217434 1.800.328.217434 1.800.328.2174
TOP MOUNTBOTTOM MOUNT
REVERSE-PARALLEL
BOTTOM (RPB)
mounting surface shown UP
REVERSE-PARALLEL
TOP (RPT)
mounting surface shown UP
REVERSE-PARALLEL
LEFT (RPL)
mounting surface shown UP
REVERSE-PARALLEL
RIGHT (RPR)
mounting surface shown UP
SIDE MOUNT (Right Shown)SIDE MOUNT (Left Shown)
D
BG
H
F
C
A
KJKJ
S-SOLID BEARING REVERSE PARALLEL MOTOR MOUNTING DIMENSIONS
MXE16S & MXE25S
A B C D F G H J K
MOTOR in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm
BRUSHLESS
16
MRV11 0.88 22.2 4.59 116.6 0.72 18.3 1.94 49.3 1.18 30.0 1.00 25.4 4.65 118.1 1.18 30.0 – –
MXE25
MRV21 1.44 36.6 6.96 176.8 2.13 54.1 3.25 82.6 1.60 40.6 1.27 32.3 4.75 120.7 1.45 36.8 1.48 37.6
MRV22 1.44 36.6 6.96 176.8 2.13 54.1 3.25 82.6 1.60 40.6 1.27 32.3 5.75 146.1 1.45 36.8 1.48 37.6
MRV23 1.44 36.6 6.96 176.8 2.13 54.1 3.25 82.6 1.60 40.6 1.27 32.3 6.75 171.5 1.45 36.8 1.48 37.6
MRV24 1.44 36.6 6.96 176.8 2.13 54.1 3.25 82.6 1.60 40.6 1.27 32.3 7.75 196.9 1.45 36.8 1.48 37.6
STEPPER
MXE25
MRS21 1.44 36.6 6.96 176.8 2.13 54.1 3.25 82.6 1.60 40.6 1.27 32.3 1.71 43.4 1.45 36.8 1.48 37.6
MRS22 1.44 36.6 6.96 176.8 2.13 54.1 3.25 82.6 1.60 40.6 1.27 32.3 2.19 55.6 1.45 36.8 1.48 37.6
MRS23 1.44 36.6 6.96 176.8 2.13 54.1 3.25 82.6 1.60 40.6 1.27 32.3 3.05 77.5 1.45 36.8 1.48 37.6
MRS31 1.96 49.8 7.47 189.7 2.38 60.5 4.00 101.6 1.02 25.9 0.69 17.5 3.11 79.0 0.87 22.1 0.9 22.9
MRS32 1.96 49.8 7.47 189.7 2.38 60.5 4.00 101.6 1.02 25.9 0.69 17.5 4.63 117.6 0.87 22.1 0.9 22.9
MRS33 1.96 49.8 7.47 189.7 2.38 60.5 4.00 101.6 1.02 25.9 0.69 17.5 6.14 156.0 0.87 22.1 0.9 22.9
WEIGHT OF
REDUCTION DRIVE
REDUCTION INERTIA
AT MOTOR SHAFT
1:1 2:1 1:1 2:1
ACTUATOR MOTOR lbs kg lbs kg lb-in2
kg-cm2
lb-in2
kg-cm2
MXE16 M R V BRUSHLESS 17 FRAME 0.55 0.25 0.58 0.27 0.001 0.0029 0.002 0.0059
MXE25
M R V BRUSHLESS
ALL FRAME SIZES
2.06 0.93 2.06 0.93 0.087 0.2559 0.112 0.3291
MXE25 M R S STEPPER 23-FRAME 1.92 0.87 1.92 0.87 0.022 0.064 0.046 0.135
MXE25 M R S STEPPER 34-FRAME 2.34 1.06 2.34 1.06 0.025 0.073 0.050 0.146
REDUCTION EFFICIENCY: 0.95
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
35. www.tolomatic.com/mxe 35www.tolomatic.com/mxe 35
TOP MOUNTBOTTOM MOUNT
REVERSE-PARALLEL
BOTTOM (RPB)
mounting surface shown UP
REVERSE-PARALLEL
TOP (RPT)
mounting surface shown UP
REVERSE-PARALLEL
LEFT (RPL)
mounting surface shown UP
REVERSE-PARALLEL
RIGHT (RPR)
mounting surface shown UP
SIDE MOUNT (Right Shown)SIDE MOUNT (Left Shown)
D
BG
H
F
C
A
JJ
S-SOLID BEARING REVERSE PARALLEL MOTOR MOUNTING DIMENSIONS
MXE32S
A B C D F G H J
MOTOR in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm
BRUSHLESS
MRV21 1.44 36.6 6.96 176.8 2.13 54.1 3.25 82.6 1.40 35.6 0.75 19.1 4.75 120.7 1.18 30.0
MRV22 1.44 36.6 6.96 176.8 2.13 54.1 3.25 82.6 1.40 35.6 0.75 19.1 5.75 146.1 1.18 30.0
MRV23 1.44 36.6 6.96 176.8 2.13 54.1 3.25 82.6 1.40 35.6 0.75 19.1 6.75 171.5 1.18 30.0
MRV24 1.44 36.6 6.96 176.8 2.13 54.1 3.25 82.6 1.40 35.6 0.75 19.1 7.75 196.9 1.18 30.0
STEPPER
MRS21 1.44 36.6 6.96 176.8 2.13 54.1 3.25 82.6 1.40 35.6 0.75 19.1 1.71 43.4 1.18 30.0
MRS22 1.44 36.6 6.96 176.8 2.13 54.1 3.25 82.6 1.40 35.6 0.75 19.1 2.19 55.6 1.18 30.0
MRS23 1.44 36.6 6.96 176.8 2.13 54.1 3.25 82.6 1.40 35.6 0.75 19.1 3.05 77.5 1.18 30.0
MRS31 1.96 49.8 7.47 189.7 2.38 60.5 4.00 101.6 0.82 20.8 0.17 4.3 3.11 79.0 0.6 15.2
MRS32 1.96 49.8 7.47 189.7 2.38 60.5 4.00 101.6 0.82 20.8 0.17 4.3 4.63 117.6 0.6 15.2
MRS33 1.96 49.8 7.47 189.7 2.38 60.5 4.00 101.6 0.82 20.8 0.17 4.3 6.14 156.0 0.6 15.2
WEIGHT OF
REDUCTION DRIVE
REDUCTION INERTIA
AT MOTOR SHAFT
1:1 2:1 1:1 2:1
MOTOR lbs kg lbs kg lb-in2
kg-cm2
lb-in2
kg-cm2
M R V BRUSHLESS
ALL FRAME SIZES
2.06 0.93 2.06 0.93 0.087 0.2559 0.112 0.3291
M R S STEPPER 23-FRAME 1.92 0.87 1.92 0.87 0.022 0.064 0.046 0.135
M R S STEPPER 34-FRAME 2.34 1.06 2.34 1.06 0.025 0.073 0.050 0.146
REDUCTION EFFICIENCY: 0.95
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
36. 36 1.800.328.217436 1.800.328.217436 1.800.328.2174
TOP MOUNTBOTTOM MOUNT
REVERSE-PARALLEL
BOTTOM (RPB)
mounting surface shown UP
REVERSE-PARALLEL
TOP (RPT)
mounting surface shown UP
REVERSE-PARALLEL
LEFT (RPL)
mounting surface shown UP
REVERSE-PARALLEL
RIGHT (RPR)
mounting surface shown UP
SIDE MOUNT (Right Shown)SIDE MOUNT (Left Shown)
D
BG
H
F
C
A
JJ
S-SOLID BEARING REVERSE PARALLEL MOTOR MOUNTING DIMENSIONS
MXE40S
A B C D F G H J
MOTOR in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm
BRUSHLESS
MRV21 1.44 36.6 7.46 189.5 2.13 54.1 3.25 82.6 1.57 39.9 1.13 28.7 4.75 120.7 1.37 34.8
MRV22 1.44 36.6 7.46 189.5 2.13 54.1 3.25 82.6 1.57 39.9 1.13 28.7 5.75 146.1 1.37 34.8
MRV23 1.44 36.6 7.46 189.5 2.13 54.1 3.25 82.6 1.57 39.9 1.13 28.7 6.75 171.5 1.37 34.8
MRV24 1.44 36.6 7.46 189.5 2.13 54.1 3.25 82.6 1.57 39.9 1.13 28.7 7.75 196.9 1.37 34.8
MRV31 2.12 53.8 8.14 206.8 2.38 60.5 4.00 101.6 0.92 23.4 0.48 12.2 6.11 155.2 0.72 18.3
MRV32 2.12 53.8 8.14 206.8 2.38 60.5 4.00 101.6 0.92 23.4 0.48 12.2 7.36 186.9 0.72 18.3
MRV33 2.12 53.8 8.14 206.8 2.38 60.5 4.00 101.6 0.92 23.4 0.48 12.2 8.61 218.7 0.72 18.3
STEPPER
MRS21 1.44 36.6 7.46 189.5 2.13 54.1 3.25 82.6 1.57 39.9 1.13 28.7 1.71 43.4 1.37 34.8
MRS22 1.44 36.6 7.46 189.5 2.13 54.1 3.25 82.6 1.57 39.9 1.13 28.7 2.19 55.6 1.37 34.8
MRS23 1.44 36.6 7.46 189.5 2.13 54.1 3.25 82.6 1.57 39.9 1.13 28.7 3.05 77.5 1.37 34.8
MRS31 2.12 53.8 8.14 206.8 2.38 60.5 4.00 101.6 0.99 25.1 0.55 14.0 3.11 79.0 0.79 22.1
MRS32 2.12 53.8 8.14 206.8 2.38 60.5 4.00 101.6 0.99 25.1 0.55 14.0 4.63 117.6 0.79 22.1
MRS33 2.12 53.8 8.14 206.8 2.38 60.5 4.00 101.6 0.99 25.1 0.55 14.0 6.14 156.0 0.79 22.1
WEIGHT OF
REDUCTION DRIVE
REDUCTION INERTIA
AT MOTOR SHAFT
1:1 2:1 1:1 2:1
MOTOR lbs kg lbs kg lb-in2
kg-cm2
lb-in2
kg-cm2
M R V BRUSHLESS
ALL FRAME SIZES
2.17 0.98 2.40 1.09 0.070 0.2043 0.095 0.2767
M R S STEPPER 23-FRAME 2.03 0.92 2.26 1.03 0.022 0.064 0.054 0.159
M R S STEPPER 34-FRAME 2.49 1.13 2.72 1.23 0.025 0.073 0.058 0.168
REDUCTION EFFICIENCY: 0.95
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
37. www.tolomatic.com/mxe 37www.tolomatic.com/mxe 37
TOP MOUNTBOTTOM MOUNT
REVERSE-PARALLEL
BOTTOM (RPB)
mounting surface shown UP
REVERSE-PARALLEL
TOP (RPT)
mounting surface shown UP
REVERSE-PARALLEL
LEFT (RPL)
mounting surface shown UP
REVERSE-PARALLEL
RIGHT (RPR)
mounting surface shown UP
SIDE MOUNT (Right Shown)SIDE MOUNT (Left Shown)
D
BG
H
F
C
A
JJ
S-SOLID BEARING REVERSE PARALLEL MOTOR MOUNTING DIMENSIONS
MXE50S
A B C D F G H J
MOTOR in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm
BRUSHLESS
MRV21 2.51 63.8 9.39 238.5 2.38 60.5 4.00 101.6 2.32 58.9 1.52 38.6 4.75 120.7 2.41 61.2
MRV22 2.51 63.8 9.39 238.5 2.38 60.5 4.00 101.6 2.32 58.9 1.52 38.6 5.75 146.1 2.41 61.2
MRV23 2.51 63.8 9.39 238.5 2.38 60.5 4.00 101.6 2.32 58.9 1.52 38.6 6.75 171.5 2.41 61.2
MRV24 2.51 63.8 9.39 238.5 2.38 60.5 4.00 101.6 2.32 58.9 1.52 38.6 7.75 196.9 2.41 61.2
MRV31 2.51 63.8 9.39 238.5 2.38 60.5 4.00 101.6 1.66 42.2 0.86 21.8 6.11 155.2 1.75 44.5
MRV32 2.51 63.8 9.39 238.5 2.38 60.5 4.00 101.6 1.66 42.2 0.86 21.8 7.36 186.9 1.75 44.5
MRV33 2.51 63.8 9.39 238.5 2.38 60.5 4.00 101.6 1.66 42.2 0.86 21.8 8.61 218.7 1.75 44.5
STEPPER
MRS21 2.51 63.8 9.39 238.5 2.38 60.5 4.00 101.6 2.32 58.9 1.52 38.6 1.71 43.4 2.41 61.2
MRS22 2.51 63.8 9.39 238.5 2.38 60.5 4.00 101.6 2.32 58.9 1.52 38.6 2.19 55.6 2.41 61.2
MRS23 2.51 63.8 9.39 238.5 2.38 60.5 4.00 101.6 2.32 58.9 1.52 38.6 3.05 77.5 2.41 61.2
MRS31 2.51 63.8 9.39 238.5 2.38 60.5 4.00 101.6 1.66 42.2 0.86 21.8 3.11 79.0 1.75 44.5
MRS32 2.51 63.8 9.39 238.5 2.38 60.5 4.00 101.6 1.66 42.2 0.86 21.8 4.63 117.6 1.75 44.5
MRS33 2.51 63.8 9.39 238.5 2.38 60.5 4.00 101.6 1.66 42.2 0.86 21.8 6.14 156.0 1.75 44.5
WEIGHT OF
REDUCTION DRIVE
REDUCTION INERTIA
AT MOTOR SHAFT
1:1 2:1 1:1 2:1
MOTOR lbs kg lbs kg lb-in2
kg-cm2
lb-in2
kg-cm2
M R V BRUSHLESS 23-FRAME 3.49 1.58 4.41 2.00 0.090 0.2634 0.254 0.7433
M R V BRUSHLESS 34-FRAME 3.96 1.80 4.86 2.21 0.090 0.2634 0.254 0.7433
M R S STEPPER 23-FRAME 3.49 1.58 4.41 2.00 0.090 0.2634 0.254 0.7433
M R S STEPPER 34-FRAME 3.96 1.80 4.86 2.21 0.090 0.2634 0.254 0.7433
REDUCTION EFFICIENCY: 0.95
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
38. 38 1.800.328.217438 1.800.328.217438 1.800.328.2174
TOP MOUNTBOTTOM MOUNT
REVERSE-PARALLEL
BOTTOM (RPB)
mounting surface shown UP
REVERSE-PARALLEL
TOP (RPT)
mounting surface shown UP
REVERSE-PARALLEL
LEFT (RPL)
mounting surface shown UP
REVERSE-PARALLEL
RIGHT (RPR)
mounting surface shown UP
SIDE MOUNT (Right Shown)SIDE MOUNT (Left Shown)
D
BG
H
F
C
A
JJ
S-SOLID BEARING REVERSE PARALLEL MOTOR MOUNTING DIMENSIONS
MXE63S
A B C D F G H J
MOTOR in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm
BRUSHLESS
MRV21 2.19 55.6 9.23 234.4 2.59 65.8 5.00 127.0 0.95 24.1 1.85 47.0 4.75 120.7 1.98 50.3
MRV22 2.19 55.6 9.23 234.4 2.59 65.8 5.00 127.0 0.95 24.1 1.85 47.0 5.75 146.1 1.98 50.3
MRV23 2.19 55.6 9.23 234.4 2.59 65.8 5.00 127.0 0.95 24.1 1.85 47.0 6.75 171.5 1.98 50.3
MRV24 2.19 55.6 9.23 234.4 2.59 65.8 5.00 127.0 0.95 24.1 1.85 47.0 7.75 196.9 1.98 50.3
MRV31 2.19 55.6 10.80 275.0 2.59 65.8 5.00 127.0 2.33 59.2 1.43 36.3 6.11 155.2 2.46 62.5
MRV32 2.19 55.6 10.80 275.0 2.59 65.8 5.00 127.0 2.33 59.2 1.43 36.3 7.36 186.9 2.46 62.5
MRV33 2.19 55.6 10.80 275.0 2.59 65.8 5.00 127.0 2.33 59.2 1.43 36.3 8.61 218.7 2.46 62.5
MRV51 2.19 55.6 11.60 294.1 2.59 65.8 5.00 127.0 1.72 43.7 0.83 21.1 9.96 253.0 1.86 47.2
STEPPER
MRS31 2.19 55.6 10.80 275.0 2.59 65.8 5.00 127.0 2.33 59.2 1.43 36.3 3.11 79.0 2.46 62.5
MRS32 2.19 55.6 10.80 275.0 2.59 65.8 5.00 127.0 2.33 59.2 1.43 36.3 4.63 117.6 2.46 62.5
MRS33 2.19 55.6 10.80 275.0 2.59 65.8 5.00 127.0 2.33 59.2 1.43 36.3 6.14 156.0 2.46 62.5
WEIGHT OF
REDUCTION DRIVE
REDUCTION INERTIA
AT MOTOR SHAFT
1:1 2:1 1:1 2:1
MOTOR lbs kg lbs kg lb-in2
kg-cm2
lb-in2
kg-cm2
M R V BRUSHLESS 23-FRAME 3.49 1.58 4.41 2.00 0.090 0.2634 0.254 0.7433
M R V BRUSHLESS 34-FRAME 3.94 1.79 4.84 2.19 0.087 0.2546 0.251 0.7345
M R V BRUSHLESS 56-FRAME 4.20 1.91 5.10 2.31 0.087 0.2546 0.251 0.7345
M R S STEPPER 34-FRAME 3.96 1.80 4.86 2.21 0.090 0.2634 0.254 0.7433
REDUCTION EFFICIENCY: 0.95
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
39. www.tolomatic.com/mxe 39www.tolomatic.com/mxe 39
D
B
TOP MOUNT
J
HC
K
BOTTOM MOUNT
REVERSE-PARALLEL
BOTTOM (RPB)
mounting surface shown UP
REVERSE-PARALLEL
TOP (RPT)
mounting surface shown UP
REVERSE-PARALLEL
LEFT (RPL)
mounting surface shown UP
REVERSE-PARALLEL
RIGHT (RPR)
mounting surface shown UP
F
A
G
SIDE MOUNT (Right Shown)SIDE MOUNT (Left Shown)
P-PROFILED RAIL REVERSE PARALLEL MOTOR MOUNTING DIMENSIONS
MXE16P & MXE25P
A B C D F G H J K
MOTOR in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm
16
MRV11 0.88 22.2 4.59 116.6 0.72 18.3 1.94 49.3 1.18 30.0 0.85 21.6 4.65 118.1 1.04 26.4 1.19 30.2
BRUSHLESS
MXE25
MRV21 1.44 36.6 6.96 176.8 2.13 54.1 3.25 82.6 1.48 37.6 1.13 28.7 4.75 120.7 1.18 30.0 1.38 35.1
MRV22 1.44 36.6 6.96 176.8 2.13 54.1 3.25 82.6 1.48 37.6 1.13 28.7 5.75 146.1 1.18 30.0 1.38 35.1
MRV23 1.44 36.6 6.96 176.8 2.13 54.1 3.25 82.6 1.48 37.6 1.13 28.7 6.75 171.5 1.18 30.0 1.38 35.1
MRV24 1.44 36.6 6.96 176.8 2.13 54.1 3.25 82.6 1.48 37.6 1.13 28.7 7.75 196.9 1.18 30.0 1.38 35.1
STEPPER
MXE25
MRS21 1.44 36.6 6.96 176.8 2.13 54.1 3.25 82.6 1.48 37.6 1.13 28.7 1.71 43.4 1.18 30.0 1.38 35.1
MRS22 1.44 36.6 6.96 176.8 2.13 54.1 3.25 82.6 1.48 37.6 1.13 28.7 2.19 55.6 1.18 30.0 1.38 35.1
MRS23 1.44 36.6 6.96 176.8 2.13 54.1 3.25 82.6 1.48 37.6 1.13 28.7 3.05 77.5 1.18 30.0 1.38 35.1
MRS31 1.96 49.8 7.47 189.7 2.38 60.5 4.00 101.6 0.90 22.9 0.55 14.0 3.11 79.0 0.66 16.8 0.8 20.3
MRS32 1.96 49.8 7.47 189.7 2.38 60.5 4.00 101.6 0.90 22.9 0.55 14.0 4.63 117.6 0.66 16.8 0.8 20.3
MRS33 1.96 49.8 7.47 189.7 2.38 60.5 4.00 101.6 0.90 22.9 0.55 14.0 6.14 156.0 0.66 16.8 0.8 20.3
WEIGHT OF
REDUCTION DRIVE
REDUCTION INERTIA
AT MOTOR SHAFT
1:1 2:1 1:1 2:1
ACTUATOR MOTOR lbs kg lbs kg lb-in2
kg-cm2
lb-in2
kg-cm2
MXE16 M R V BRUSHLESS 17 FRAME 0.55 0.25 0.58 0.27 0.001 0.0029 0.002 0.0059
MXE25
M R V BRUSHLESS
ALL FRAME SIZES
2.06 0.93 2.06 0.93 0.087 0.2559 0.112 0.3291
MXE25 M R S STEPPER 23-FRAME 1.92 0.87 1.92 0.87 0.022 0.064 0.046 0.135
MXE25 M R S STEPPER 34-FRAME 2.34 1.06 2.34 1.06 0.025 0.073 0.050 0.146
REDUCTION EFFICIENCY: 0.95
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
40. 40 1.800.328.217440 1.800.328.217440 1.800.328.2174
D
B
TOP MOUNT
J
HC
K
BOTTOM MOUNT
REVERSE-PARALLEL
BOTTOM (RPB)
mounting surface shown UP
REVERSE-PARALLEL
TOP (RPT)
mounting surface shown UP
REVERSE-PARALLEL
LEFT (RPL)
mounting surface shown UP
REVERSE-PARALLEL
RIGHT (RPR)
mounting surface shown UP
F
A
G
SIDE MOUNT (Right Shown)SIDE MOUNT (Left Shown)
P-PROFILED RAIL REVERSE PARALLEL MOTOR MOUNTING DIMENSIONS
MXE40SMXE32P
A B C D F G H J K
MOTOR in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm
BRUSHLESS
MRV21 1.44 36.6 6.96 176.8 2.13 54.1 3.25 82.6 1.52 38.6 0.65 16.5 4.75 120.7 0.76 19.3 1.20 30.5
MRV22 1.44 36.6 6.96 176.8 2.13 54.1 3.25 82.6 1.52 38.6 0.65 16.5 5.75 146.1 0.76 19.3 1.20 30.5
MRV23 1.44 36.6 6.96 176.8 2.13 54.1 3.25 82.6 1.52 38.6 0.65 16.5 6.75 171.5 0.76 19.3 1.20 30.5
MRV24 1.44 36.6 6.96 176.8 2.13 54.1 3.25 82.6 1.52 38.6 0.65 16.5 7.75 196.9 0.76 19.3 1.20 30.5
STEPPER
MRS21 1.44 36.6 6.96 176.8 2.13 54.1 3.25 82.6 1.52 38.6 0.65 16.5 1.71 43.4 0.76 19.3 1.20 30.5
MRS22 1.44 36.6 6.96 176.8 2.13 54.1 3.25 82.6 1.52 38.6 0.65 16.5 2.19 55.6 0.76 19.3 1.20 30.5
MRS23 1.44 36.6 6.96 176.8 2.13 54.1 3.25 82.6 1.52 38.6 0.65 16.5 3.05 77.5 0.76 19.3 1.20 30.5
MRS31 1.96 49.8 7.47 189.7 2.38 60.5 4.00 101.6 0.94 23.9 0.07 1.8 3.11 79.0 0.18 4.6 0.62 15.7
MRS32 1.96 49.8 7.47 189.7 2.38 60.5 4.00 101.6 0.94 23.9 0.07 1.8 4.63 117.6 0.18 4.6 0.62 15.7
MRS33 1.96 49.8 7.47 189.7 2.38 60.5 4.00 101.6 0.94 23.9 0.07 1.8 6.14 156.0 0.18 4.6 0.60 15.7
WEIGHT OF
REDUCTION DRIVE
REDUCTION INERTIA
AT MOTOR SHAFT
1:1 2:1 1:1 2:1
MOTOR lbs kg lbs kg lb-in2
kg-cm2
lb-in2
kg-cm2
M R V BRUSHLESS
ALL FRAME SIZES
2.06 0.93 2.06 0.93 0.087 0.2559 0.112 0.3291
M R S STEPPER 23-FRAME 1.92 0.87 1.92 0.87 0.022 0.064 0.046 0.135
M R S STEPPER 34-FRAME 2.34 1.06 2.34 1.06 0.025 0.073 0.050 0.146
REDUCTION EFFICIENCY: 0.95
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
41. www.tolomatic.com/mxe 41www.tolomatic.com/mxe 41
D
B
TOP MOUNT
J
HC
K
BOTTOM MOUNT
REVERSE-PARALLEL
BOTTOM (RPB)
mounting surface shown UP
REVERSE-PARALLEL
TOP (RPT)
mounting surface shown UP
REVERSE-PARALLEL
LEFT (RPL)
mounting surface shown UP
REVERSE-PARALLEL
RIGHT (RPR)
mounting surface shown UP
F
A
G
SIDE MOUNT (Right Shown)SIDE MOUNT (Left Shown)
P-PROFILED RAIL REVERSE PARALLEL MOTOR MOUNTING DIMENSIONS
MXE40SMXE40P
A B C D F G H J K
MOTOR in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm
BRUSHLESS
MRV21 1.44 36.6 7.46 189.5 2.13 54.1 3.25 82.6 1.61 40.9 0.83 21.1 4.75 120.7 1.18 30.0 1.18 30.0
MRV22 1.44 36.6 7.46 189.5 2.13 54.1 3.25 82.6 1.61 40.9 0.83 21.1 5.75 146.1 1.18 30.0 1.18 30.0
MRV23 1.44 36.6 7.46 189.5 2.13 54.1 3.25 82.6 1.61 40.9 0.83 21.1 6.75 171.5 1.18 30.0 1.18 30.0
MRV24 1.44 36.6 7.46 189.5 2.13 54.1 3.25 82.6 1.61 40.9 0.83 21.1 7.75 196.9 1.18 30.0 1.18 30.0
MRV31 2.12 53.8 8.14 206.8 2.38 60.5 4.00 101.6 0.96 24.4 0.18 4.6 6.11 155.2 0.53 13.5 0.53 13.5
MRV32 2.12 53.8 8.14 206.8 2.38 60.5 4.00 101.6 0.96 24.4 0.18 4.6 7.36 186.9 0.53 13.5 0.53 13.5
MRV33 2.12 53.8 8.14 206.8 2.38 60.5 4.00 101.6 0.96 24.4 0.18 4.6 8.61 218.7 0.53 13.5 0.53 13.5
STEPPER
MRS21 1.44 36.6 7.46 189.5 2.13 54.1 3.25 82.6 1.61 40.9 0.83 21.1 1.71 43.4 1.18 30.0 1.18 30.0
MRS22 1.44 36.6 7.46 189.5 2.13 54.1 3.25 82.6 1.61 40.9 0.83 21.1 2.19 55.6 1.18 30.0 1.18 30.0
MRS23 1.44 36.6 7.46 189.5 2.13 54.1 3.25 82.6 1.61 40.9 0.83 21.1 3.05 77.5 1.18 30.0 1.18 30.0
MRS31 1.96 49.8 8.14 206.8 2.38 60.5 4.00 101.6 1.03 26.2 0.25 6.4 3.11 79.0 0.6 15.2 0.6 15.2
MRS32 1.96 49.8 8.14 206.8 2.38 60.5 4.00 101.6 1.03 26.2 0.25 6.4 4.63 117.6 0.6 15.2 0.6 15.2
MRS33 1.96 49.8 8.14 206.8 2.38 60.5 4.00 101.6 1.03 26.2 0.25 6.4 6.14 156.0 0.6 15.2 0.6 15.2
WEIGHT OF
REDUCTION DRIVE
REDUCTION INERTIA
AT MOTOR SHAFT
1:1 2:1 1:1 2:1
MOTOR lbs kg lbs kg lb-in2
kg-cm2
lb-in2
kg-cm2
M R V BRUSHLESS
ALL FRAME SIZES
2.17 0.98 2.40 1.09 0.070 0.2043 0.095 0.2767
M R S STEPPER 23-FRAME 2.03 0.92 2.26 1.03 0.022 0.064 0.054 0.159
M R S STEPPER 34-FRAME 2.49 1.13 2.72 1.23 0.025 0.073 0.058 0.168
REDUCTION EFFICIENCY: 0.95
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
42. 42 1.800.328.217442 1.800.328.217442 1.800.328.2174
D
B
TOP MOUNT
J
HC
K
BOTTOM MOUNT
REVERSE-PARALLEL
BOTTOM (RPB)
mounting surface shown UP
REVERSE-PARALLEL
TOP (RPT)
mounting surface shown UP
REVERSE-PARALLEL
LEFT (RPL)
mounting surface shown UP
REVERSE-PARALLEL
RIGHT (RPR)
mounting surface shown UP
F
A
G
SIDE MOUNT (Right Shown)SIDE MOUNT (Left Shown)
MXE50P
A B C D F G H J K
MOTOR in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm
BRUSHLESS
MRV21 2.51 63.8 9.39 238.5 2.38 60.5 4.00 101.6 2.41 61.2 0.98 24.9 4.75 120.7 1.62 41.1 2.03 51.6
MRV22 2.51 63.8 9.39 238.5 2.38 60.5 4.00 101.6 2.41 61.2 0.98 24.9 5.75 146.1 1.62 41.1 2.03 51.6
MRV23 2.51 63.8 9.39 238.5 2.38 60.5 4.00 101.6 2.41 61.2 0.98 24.9 6.75 171.5 1.62 41.1 2.03 51.6
MRV24 2.51 63.8 9.39 238.5 2.38 60.5 4.00 101.6 2.41 61.2 0.98 24.9 7.75 196.9 1.62 41.1 2.03 51.6
MRV31 2.51 63.8 9.39 238.5 2.38 60.5 4.00 101.6 1.75 44.5 0.32 8.1 6.11 155.2 0.96 24.4 1.37 34.8
MRV32 2.51 63.8 9.39 238.5 2.38 60.5 4.00 101.6 1.75 44.5 0.32 8.1 7.36 186.9 0.96 24.4 1.37 34.8
MRV33 2.51 63.8 9.39 238.5 2.38 60.5 4.00 101.6 1.75 44.5 0.32 8.1 8.61 218.7 0.96 24.4 1.37 34.8
STEPPER
MRS21 2.51 63.8 9.39 238.5 2.38 60.5 4.00 101.6 2.41 61.2 0.98 24.9 1.71 43.4 1.62 41.1 2.03 51.6
MRS22 2.51 63.8 9.39 238.5 2.38 60.5 4.00 101.6 2.41 61.2 0.98 24.9 2.19 55.6 1.62 41.1 2.03 51.6
MRS23 2.51 63.8 9.39 238.5 2.38 60.5 4.00 101.6 2.41 61.2 0.98 24.9 3.05 77.5 1.62 41.1 2.03 51.6
MRS31 2.51 63.8 9.39 238.5 2.38 60.5 4.00 101.6 1.75 44.5 0.32 8.1 3.11 79.0 0.96 24.4 1.37 34.8
MRS32 2.51 63.8 9.39 238.5 2.38 60.5 4.00 101.6 1.75 44.5 0.32 8.1 4.63 117.6 0.96 24.4 1.37 34.8
MRS33 2.51 63.8 9.39 238.5 2.38 60.5 4.00 101.6 1.75 44.5 0.32 8.1 6.14 156.0 0.96 24.4 1.37 34.8
WEIGHT OF
REDUCTION DRIVE
REDUCTION INERTIA
AT MOTOR SHAFT
1:1 2:1 1:1 2:1
MOTOR lbs kg lbs kg lb-in2
kg-cm2
lb-in2
kg-cm2
M R V BRUSHLESS 23-FRAME 3.49 1.58 4.41 2.00 0.090 0.2634 0.254 0.7433
M R V BRUSHLESS 34-FRAME 3.96 1.80 4.86 2.21 0.090 0.2634 0.254 0.7433
M R S STEPPER 23-FRAME 3.49 1.58 4.41 2.00 0.090 0.2634 0.254 0.7433
M R S STEPPER 34-FRAME 3.96 1.80 4.86 2.21 0.090 0.2634 0.254 0.7433
REDUCTION EFFICIENCY: 0.95
P-PROFILED RAIL REVERSE PARALLEL MOTOR MOUNTING DIMENSIONS
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
43. www.tolomatic.com/mxe 43www.tolomatic.com/mxe 43
D
B
TOP MOUNT
J
HC
K
BOTTOM MOUNT
REVERSE-PARALLEL
BOTTOM (RPB)
mounting surface shown UP
REVERSE-PARALLEL
TOP (RPT)
mounting surface shown UP
REVERSE-PARALLEL
LEFT (RPL)
mounting surface shown UP
REVERSE-PARALLEL
RIGHT (RPR)
mounting surface shown UP
F
A
G
SIDE MOUNT (Right Shown)SIDE MOUNT (Left Shown)
MXE63P
A B C D F G H J K
MOTOR in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm
BRUSHLESS
MRV21 2.19 55.6 9.23 234.4 2.59 65.8 5.00 127.0 1.98 50.3 0.60 15.2 4.75 120.7 1.10 27.9 1.54 39.1
MRV22 2.19 55.6 9.23 234.4 2.59 65.8 5.00 127.0 1.98 50.3 0.60 15.2 5.75 146.1 1.10 27.9 1.54 39.1
MRV23 2.19 55.6 9.23 234.4 2.59 65.8 5.00 127.0 1.98 50.3 0.60 15.2 6.75 171.5 1.10 27.9 1.54 39.1
MRV24 2.19 55.6 9.23 234.4 2.59 65.8 5.00 127.0 1.98 50.3 0.60 15.2 7.75 196.9 1.10 27.9 1.54 39.1
MRV31 2.19 55.6 10.82 274.8 2.59 65.8 5.00 127.0 2.46 62.5 1.08 27.4 6.11 155.2 1.58 40.1 2.02 51.3
MRV32 2.19 55.6 10.82 274.8 2.59 65.8 5.00 127.0 2.46 62.5 1.08 27.4 7.36 186.9 1.58 40.1 2.02 51.3
MRV33 2.19 55.6 10.82 274.8 2.59 65.8 5.00 127.0 2.46 62.5 1.08 27.4 8.61 218.7 1.58 40.1 2.02 51.3
MRV51 2.19 55.6 11.58 294.1 2.59 65.8 5.00 127.0 1.86 47.2 0.48 12.2 9.96 253.0 0.98 24.9 1.41 35.8
STEPPER
MRS31 2.19 55.6 10.82 274.8 2.59 65.8 5.00 127.0 2.46 62.5 1.08 27.4 3.11 79.0 1.58 40.1 2.02 51.3
MRS32 2.19 55.6 10.82 274.8 2.59 65.8 5.00 127.0 2.46 62.5 1.08 27.4 4.63 117.6 1.58 40.1 2.02 51.3
MRS33 2.19 55.6 10.82 274.8 2.59 65.8 5.00 127.0 2.46 62.5 1.08 27.4 6.14 156.0 1.58 40.1 2.02 51.3
WEIGHT OF
REDUCTION DRIVE
REDUCTION INERTIA
AT MOTOR SHAFT
1:1 2:1 1:1 2:1
MOTOR lbs kg lbs kg lb-in2
kg-cm2
lb-in2
kg-cm2
M R V BRUSHLESS 23-FRAME 3.49 1.58 4.41 2.00 0.090 0.2634 0.254 0.7433
M R V BRUSHLESS 34-FRAME 3.94 1.79 4.84 2.19 0.087 0.2546 0.251 0.7345
M R V BRUSHLESS 56-FRAME 4.20 1.91 5.10 2.31 0.087 0.2546 0.251 0.7345
M R S STEPPER 34-FRAME 3.96 1.80 4.86 2.21 0.090 0.2634 0.254 0.7433
REDUCTION EFFICIENCY: 0.95
P-PROFILED RAIL REVERSE PARALLEL MOTOR MOUNTING DIMENSIONS
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
44. 44 1.800.328.217444 1.800.328.217444 1.800.328.2174
*QD = Quick disconnect Enclosure classification IEC 529 IP67 (NEMA 6) CABLES: Robotic grade, oil resistant polyurethane jacket, PVC insulation
**WARNING: Do not exceed power rating (Watt = Voltage x Amperage). Permanent damage to sensor will occur.
Order
Code
Part
Number Lead
Switching
Logic
Power
LED
Signal
LED
Oper-
ating
Voltage
**Power
Rating
(Watts)
Switching
Current
(mA max.)
Current
Con-
sumption
Voltage
Drop
Leak-
age
Current
Temp.
Range
Shock /
Vibration
REED
R Y 8100-9082 5m SPST
Normally
Open
— Red
5 - 240
AC/DC
**10.0 100mA —
3.0 V
max.
—
14
to
158°F
[-10
to
70°C]
50 G /
9 G
R K 8100-9083 QD* 81009082
N Y 8100-9084 5m SPST
Normally
Closed
— Yellow
5 - 110
AC/DC
N K 8100-9085 QD* 81009084
SOLID
STATE
T Y 8100-9088 5m PNP
(Sourcing)
Normally
Open
Green Yellow
10 - 30
VDC
**3.0 100mA
20 mA @
24V
2.0 V
max.
0.05
mA
max.
T K 8100-9089 QD* 81009088
K Y 8100-9090 5m NPN
(Sinking)
Normally
Open
Green Red
K K 8100-9091 QD* 81009090
P Y 8100-9092 5m PNP
(Sourcing)
Normally
Closed
Green Yellow
P K 8100-9093 QD* 81009092
H Y 8100-9094 5m NPN
(Sinking)
Normally
Closed
Green Red
H K 8100-9095 QD* 81009094
SWITCHES
SPECIFICATIONS
MX products offer a wide range of sensing choices. There are
12 switch choices: reed, solid state PNP (sourcing) or solid
state NPN (sinking); in normally open or normally closed; with
flying leads or quick disconnect.
Commonly used for end-of-stroke positioning, these switches
allow drop-in installation anywhere along the entire actuator
length. The one piece design includes the retained fastening
hardware and is designed for any open side or bottom slot on the
MX. The internal piston magnet is a standard feature, therefore
these switches can be installed in the field at any time.
Switches are used to send analog signals to PLC
(programmable logic controller), TLL, CMOS circuit or other
controller device. Switches contain reverse polarity protection.
Solid state QD cables are shielded; shield should be
terminated at flying lead end.
All switches are CE rated and are RoHS compliant. Switches
feature bright red or yellow LED signal indicators; solid state
switches also have green LED power indicators.
RoHS
COMPLIANT
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
45. www.tolomatic.com/mxe 45www.tolomatic.com/mxe 45
WIRING DIAGRAMS
NORMALLY
CLOSED
BRN
BLU
+
-
LOAD
NORMALLY
CLOSED
BRN
BLU
+
-LOAD
or
NORMALLY
OPEN PNP
(SOURCING)
BRN
BLK
+
SIGNAL
LOAD
BLU
-
NORMALLY
OPEN NPN
(SINKING)
BRN
BLK
+
SIGNAL
LOAD
BLU
-
NORMALLY
CLOSED PNP
(SOURCING)
BRN
BLK
+
SIGNAL
LOAD
BLU
-
NORMALLY
CLOSED NPN
(SINKING)
BRN
BLK
+
SIGNAL
LOAD
BLU
-
NORMALLY
OPEN
BRN
BLU
+
-
LOAD
NORMALLY
OPEN
BRN
BLU
+
-LOAD
or
TY, #8100-9088, • TK, #8100-9089
SOLID STATE • NORMALLY OPEN • PNP
NY, #8100-9084, • NK, #8100-9085
REED • NORMALLY CLOSED
QUICK DISCONNECT MALE PLUG PINOUT #8100-9080 QUICK DISCONNECT
FEMALE SOCKET PINOUT
RY, #8100-9082, • RK, #8100-9083
REED • NORMALLY OPEN
KY, #8100-9090, • KK, #8100-9091
SOLID STATE • NORMALLY OPEN • NPN
PY, #8100-9092, • PK, #8100-9093
SOLID STATE • NORMALLY CLOSED • PNP
HY, #8100-9094, • HK, #8100-9095
SOLID STATE • NORMALLY CLOSED • NPN
BROWN (+)
BLUE (-)
BLACK
(SIGNAL)
BLUE (-)
BROWN (+)
BLACK
(SIGNAL)
SWITCHES
SWITCH INSTALLATION AND REPLACEMENT
Place switch in side groove on tube at desired location with "Tolomatic" facing
outward. While applying light pressure to the switch, rotate it such that the switch is
halfway in the groove. Maintaining light pressure, rotate the switch in the opposite
direction until the switch is fully inside the groove with "Tolomatic" visible. Re-position
the switch to the exact location and lock the switch securely into place by tightening
the screw on the switch.
Insert
switch
Rotate
switch
Secure
switch
Tolomatic
Tolomatic
Tolomatic
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
46. 46 1.800.328.217446 1.800.328.217446 1.800.328.2174
SWITCHES
Dimensions in inches [brackets indicate dimensions in millimeters]
SWITCH DIMENSIONS
1.18 [30]
.31 [8]
Ø.28 [7]
.95 [24.1]
1.26 [32.1]
.51 [13]
DETECTION POINT REED
DETECTION POINT
SOLID STATE
13.35 [339]
M8x1
M8x1
197 [5000]
197 [5000]
_ K - QD (Quick disconnect) switch
8100-9180 - QD Cable
_ Y - direct connect
Ø.35
[9]
SWITCH MOUNTING
16 25 32 40 50 63
U 0.31 0.79 1.06 0.81 1.08 1.50
mm 7.9 20.0 27.0 20.5 27.4 38.0
V 0.59 0.83 1.09 0.81 1.08 1.50
mm 15.0 21.0 27.7 20.5 27.4 38.0
W – – – 1.71 2.02 2.44
mm – – – 43.5 51.4 62.0
X – – – 1.71 2.02 2.44
mm – – – 43.5 51.4 62.0
16, 25, 32
MOUNTING DIMENSIONS
40, 50, 63
U
SWITCHES SIT BELOW
TUBE EXTRUSION PROFILE
SWITCHES SIT BELOW
TUBE EXTRUSION PROFILE
V
U
W
V
X
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
47. www.tolomatic.com/mxe 47www.tolomatic.com/mxe 47
ADJUSTMENT PROCEDURES
S SOLID BEARING CARRIER ADJUSTMENT
16 Series
Tools Required:
Inch Models: 1/16 inch and 2.5mm Hex Wrench (Key)
Metric Models: 2 and 2.5 mm Hex Wrench (Key)
1. Loosen endplate screws on both ends of the carrier.
2. Fully loosen all tension and lock screws. They do not need
to be removed, just fully loosened.
3. Tighten tension screws by turning them clockwise until the
carrier is just tight enough so that no side-to-side rocking
motion is present and it can easily be moved by hand over
the entire stroke length with no hesitation. Very little torque
on the screws is required to obtain this condition.
Note: The Tension Screws are the small set screw style
fastener. The Lock Screws are the larger, low head, hex
drive screws.
4. Tighten lock screws by turning them clockwise until tight.
The carrier should feel snug in relation to the tube, with no
side-to-side rocking motion present. If the carrier becomes
too loose, loosen the lock screws, tighten the tension
screws and then retighten the lock screws.
5. Once ideal carrier tension is achieved, fully tighten end plate
screws on both ends of the carrier.
NOTE: MXE16S requires a different carrier
adjustment procedure, see below.
TENSION SCREW
LOCK SCREW
25, 32, 40, 50, 63 Series
The S solid bearing carrier will provide for maximum life when
properly adjusted. The carrier design contains both tension
and lock screws. The tension screws control the amount of
pressure placed on the carrier bearings. The lock screws lock
the tension screws in place and provide fine adjustment of the
carrier bearings. The number of tension and lock screws will
vary depending on the bore size of the actuator.
1. Fully loosen all tension and lock screws. They do not need
to be removed, just fully loosened.
2. Tighten tension screws on both sides of carrier roughly 1/8
to 1/4 turn clockwise past where the screw starts to feel
snug. The carrier should be very difficult or impossible to
move by hand.
3. Next, adjust the lock screws on both sides of the carrier
roughly 1/8 to 1/4 turn clockwise past where the screw
starts to engage.
4. Ideal carrier tension is achieved when the carrier feels
snug in relation to the tube. No rocking motion should be
present. The carrier should be loose enough to be moved
by hand over the entire length of the actuator. If after this
process the carrier has become too loose, equally adjust
all of the lock screws with a slight 1/32 turn counter-
clockwise. A carrier that is adjusted too tight will increase
the breakaway pressure required for motion; in extreme
cases no motion will occur when air is applied.
During the application duty cycle, this process may need to
be repeated. Keeping the carrier properly adjusted will prolong
the life of the S solid bearing system.
TENSION SCREW
LOCK SCREW
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
48. 48 1.800.328.217448 1.800.328.217448 1.800.328.2174
DISTANCE FROM dx ______
CENTER OF CARRIER dy ______
TO LOAD CENTER dz ______
OF GRAVITY
■ inch ■ mm
(U.S. Standard) (Metric)
STROKE LENGTH _____________
■ inch (SK) ■ millimeters (SM)
(U.S. Standard) (Metric)
NOTE: If load or force on carrier changes during cycle use
the highest numbers for calculations
LOAD _______________
■ lb. ■ kg.
(U.S. Standard) (Metric)
COMPILE APPLICATION REQUIREMENTS
USE THE TOLOMATIC SIZING AND SELECTION SOFTWARE AVAILABLE ON-LINE AT
www.tolomatic.com OR... CALL TOLOMATIC 1-800-328-2174 with the above informa-
tion. We will provide any assistance needed to determine the proper MX actuator for the job.
APPLICATION DATA WORKSHEET
FORCES APPLIED Fz ______
TO CARRIER Fy ______
■ lbf. ■ N
(U.S. Standard) (Metric)
BENDING MOMENTS Mx ______
APPLIED TO CARRIER My ______
■ in.-lbs. ■ N-m Mz ______
(U.S. Standard) (Metric)
PRECISION
Repeatability __________________
■ inch ■ millimeters
OPERATING ENVIRONMENT
Temperature, Contamination, etc.
___________________________________
___________________________________
___________________________________
CONTACT
INFORMATION
Name, Phone, Email
Co. Name, Etc.
■ Load attached to carrier OR ■ Load supported by other mechanism
FRONT
VIEWβ
Lz
X
Z
SIDE VIEW
α
Lz
Y
Z
ACTUATOR
ACTUATORCARRIER
CARRIER
CENTER
OF GRAVITY
dz d
Y
d
x
CENTER
OF GRAVITY
dz
d
Y
d
x
ACTUATOR
ACTUATOR
CARRIER
CARRIER
dx
CENTER
OF GRAVITY
CARRIER
ACTUATOR
CARRIER
ACTUATOR
d
z
d
z
d
Y
ACTUATOR
ACTUATOR
CARRIER
CARRIER
CENTER
OF
GRAVITY
dy
d
Z
dy
d
Zd
x
■ Horizontal ■ Side ■ Horizontal Down ■ Vertical
ORIENTATION
■ Angled °
α __________ β ____________
MOVE PROFILE
Move Distance ________________
■ inch ■ millimeters
Dwell Time After Move___________
Max. Speed __________________
■ in/sec ■ mm/sec
MOVE TIME _____________
■ sec
NO. OF CYCLES _____________
■ per minute ■ per hour
FAX 1-763-478-8080
Graph your most
demanding cycle,
including accel/decel,
velocity and dwell
times. You may also
want to indicate load
variations and I/O
changes during the
cycle. Label axes
with proper scale and
units.
MOTION PROFILE
+ Speed ( )
Time or Distance ( )
Fill in known data. Not all information is
required for all applications
-
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:
49. www.tolomatic.com/mxe 49www.tolomatic.com/mxe 49
SELECTION GUIDELINES
The process of select-
ing a load bearing actua-
tor for a given applica-
tion can be complex. It is
highly recommended that
you contact Tolomatic or
a Tolomatic Distributor for
assistance in selecting
the best actuator for your
application. The following
overview of the selection
guidelines are for educa-
tional purposes only.
1
CHOOSE ACTUATOR
BEARING STYLE &
SIZE
Choose an actuator that has
the thrust, speed and mo-
ment load capacity to move
the load. Use the Speed/
Stroke graph (page 16) for
the screw and the Moment
and Load Capacity tables
(pg. 10-11) for the actuator.
2
COMPARE LOAD TO
MAXIMUM LOAD
CAPACITIES
Calculate the application
load (combination of load
mass and forces applied
to the carrier) and appli-
cation bending moments
(sum of all moments Mx,
My, and Mz applied to the
carrier). Be sure to evaluate
the magnitude of dynamic
inertia moments. When a
rigidly attached load mass is
accelerated or decelerated,
its inertia induces bend-
ing moments on the car-
rier. Careful attention to how
the load is decelerated at
the end of the stroke is re-
quired for extended actuator
performance and applica-
tion safety. If either load or
any of your moments ex-
ceed figures indicated in the
Moment and Load Capac-
ity tables (pg. 10-11) for the
actuator consider:
1) Higher capacity bearing style i.e.
S Solid to P Profiled Rail
2) A larger actuator size
3) Auxiliary carrier
4) External guide system
3CALCULATE LOAD
FACTOR LF
For loads with a center of grav-
ity offset from the carrier ac-
count for both applied (static)
and dynamic loads. The load
factor (LF) must not exceed
the value of 1.
=
Mxmax
LF
Mx +
Mymax
My +
Mzmax
Mz +
Fymax
Fy + < 1
Fzmax
Fz
If LF does exceed the value
of 1, consider the four choices
listed in step #2.
4
ESTABLISH YOUR
MOTION PROFILE
AND CALCULATE
ACCELERATION RATE
Using the application stroke
length and maximum carrier
velocity (or time to complete
the linear motion), establish
the motion profile. Select ei-
ther triangular (accel-decel)
or trapezoidal (accel-constant
speed-decel) profile. Now cal-
culate the maximum accelera-
tion and deceleration rates of
the move. Acceleration/de-
celeration should not exceed
critical speed (page 16) for the
screw/nut combination cho-
sen. Also, do not exceed safe
rates of dynamic inertia mo-
ments determined in step #3.
5SELECT THE LEAD
SCREW
Based on the application
requirements for accuracy,
backlash, quiet operation, life,
etc. select the appropriate
lead screw type (Acme screw
with a solid nut or ball screw
with a standard or anti-back-
lash nut) and the pitch (lead).
For additional information
on screw selection, consult
“Which Screw? Picking the
Right Technology” (#9900-
4644) available at www.tolo-
matic.com.
6
SELECT MOTOR
(GEARHEAD IF
NECESSARY) AND
DRIVE
To help select a motor
and drive, use the sizing
equations located in the
Engineering Resources sec-
tion of the Tolomatic Electric
Products Catalog (#3600-
4609) to calculate the ap-
plication thrust and torque
requirements. Refer to Mo-
tor sections to determine the
motor and drive.
7
DETERMINE TUBE
CLAMP/MOUNTING
PLATE
REQUIREMENTS
• Consult the Tube Clamp
Requirements graph for the
model selected (page 15)
• Cross reference the applica-
tion load and maximum dis-
tance between supports
• Select the appropriate num-
ber of tube clamps, and
mounting plates if required
for motor and adapter clear-
ance.
8CONSIDER OPTIONS
• Choose metric or inch (US
standard) load mounting.
(When ordering use SK for
inch and SM for metric)
• Switches - Reed, Solid
State PNP or NPN, all avail-
able normally open or nor-
mally closed
• FL Floating mount bracket
- used when lack of paral-
lelism occurs between the
actuator and an externally
guided and supported load
(available for S Solid bear-
ing style MXE actuators)
S SOLID BEARING 2:1 RULE
For applications using S
solid bearings, binding or
interrupted motion may
occur if the load offset is
equal to or greater than
twice the bearing length
(1X). LOAD OFFSET is
defined as: the distance
from the applied force (or
the load center of gravity)
to the centerline of the
carrier.
If the load offset cannot be
changed consider:
1.) Higher capacity bearing
style, i.e. S to P
2.) Larger Bore Cylinder
3.) Auxiliary Carrier
4.) Add External Guides
50. 50 1.800.328.217450 1.800.328.217450 1.800.328.2174
TO ORDER SERVICE PARTS SWITCHES:
SERVICE PARTS ORDERING
REPAIR
KIT
MODEL
ACTUATOR
SIZE
BEARING
TYPE
STROKE
METRIC
STROKE
LENGTH
AUXILIARY
CARRIER
DISTANCE
BETWEEN
CARRIERS
RK MXE 40 S SM2007.02 DC215.9
Repair kit includes: dust band, end caps, [Also for
S style: bearings and bearing caps]
The part number for a repair kit begins with RK
followed by model, actuator size, bearing type, and
stroke length (SK = inch/US Standard, SM =
metric) (NOTE: If unit has an auxiliary carrier also
include DC and distance between carrier centers)
REPAIR KITS
SWITCHES
Switches for MXE include retained mounting hardware and are the same for all actuator sizes and bearing styles
OPTIONS
MOUNTING OPTIONS
40 50 63
S Solid P Profiled Rail S Solid P Profiled Rail S Solid P Profiled Rail
Floating Mount Kit
Inch 8140-9536 NA 8150-9536 NA 8163-9536 NA
Metric 8140-9036 NA 8150-9036 NA 8163-9036 NA
Mounting Plate Kit
23-Frame 8340-9016 8340-9016 8350-9016 8350-9016 8363-9016 8363-9016
34-Frame 8340-9017 8340-9017 8350-9016 8350-9016 8363-9016 8363-9016
56-Frame NA NA NA NA 8363-9016 8363-9016
MOUNTING OPTIONS
16 25 32
S Solid P Profiled Rail S Solid P Profiled Rail S Solid P Profiled Rail
Floating Mount
Inch 8116-9536 NA 8125-9536 NA 8132-9536 NA
Metric 8116-9036 NA 8125-9036 NA 8132-9036 NA
Mounting Plate Kit
17-Frame 8316-9016 8316-9016 NA NA NA NA
23-Frame NA NA 8325-9016 8325-9016 8332-9016 8332-9016
34-Frame NA NA 8325-9017 8325-9017 8332-9017 8332-9017
Code
Part
Number Lead Normally Sensor Type
R Y 8100-9082 5m (197 in)
Open Reed
R K 8100-9083* Quick disconnect
N Y 8100-9084 5m (197 in)
Closed Reed
N K 8100-9085* Quick disconnect
T Y 8100-9088 5m (197 in)
Open Solid State PNP
T K 8100-9089* Quick disconnect
K Y 8100-9090 5m (197 in)
Open Solid State NPN
K K 8100-9091* Quick disconnect
P Y 8100-9092 5m (197 in)
Closed Solid State PNP
P K 8100-9093* Quick disconnect
H Y 8100-9094 5m (197 in)
Closed Solid State NPN
H K 8100-9095* Quick disconnect
*Also order mating QD cable #8100-9080
8100-9080 Mating QD (Quick disconnect) cable 197 in. (5m)
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By: