Tillage operations are broadly grouped into two types based on the time. Depending upon the purpose or necessity, different types of tillage are carried out. They are deep ploughing, subsoiling and year-round tillage.
Tillage refers to agricultural practices that mechanically agitate soil, such as plowing, stirring, digging, and overturning. It is often classified into primary and secondary tillage based on depth and thoroughness. Primary tillage like plowing produces a rough surface, while secondary tillage creates a smoother seedbed. Tillage can have both positive effects, like aerating soil and destroying weeds, and negative effects, such as increased erosion and loss of nutrients. Modern no-till and conservation tillage methods are increasingly used as alternatives to minimize environmental impacts.
Tillage and tith are important for soil health and crop growth. Tillage refers to working the surface soil to create favorable conditions for crop establishment, growth, and yield. There are two types of tillage - preparatory and special purpose. Preparatory tillage includes primary tillage using plows or tractors on new land, and secondary tillage like harrowing to create good soil structure. Zero tillage involves minimum soil disturbance and control of weeds through non-mechanical means. Tillage provides benefits like improved water holding capacity, aeration, and nutrient availability through enhanced organic matter breakdown. However, too much or improperly timed tillage can damage soil structure and increase erosion.
Tillage is the agricultural preparation of soil by mechanical agitation of various types, such as digging, stirring, and overturning. It is an important method used for control of weeds.
Conservation tillage, Practices used in Conservation Tillagescience book
This is presentation on topic of Conservation Tillage, it gives You information about conservation tillage, types of conservation tillage, Practices used in conservation tillage. It enhanced Your knowledge about conservation tillage.
There are several types of tillage operations that are carried out throughout the year depending on the crop and soil conditions. Primary tillage such as deep ploughing is used to turn over large clods of soil and kill pests and weeds. Secondary tillage such as harrowing is then used for finer cultivation to further break up clods and uproot remaining weeds. After seedbed preparation, crops like wheat and soybean are sown on flat, levelled fields. During the growing season, after tillage operations like fertilizer application, earthing up, and inter-cultivation are used to support crops.
Tillage and tilth involve mechanical soil manipulation to create ideal conditions for plant growth. Tillage includes primary tillage like ploughing to open soil and secondary tillage like harrowing to break clods. The objectives are to prepare seedbeds, control weeds, aerate soil, and mix amendments. On-season tillage occurs before planting while off-season tillage conditions soil for future crops. Different tillage types include subsoiling to break hardpans and puddling for rice where soil is tilled under water. The depth and number of tillage operations varies by crop needs and soil conditions.
Tillage refers to mechanically preparing and maintaining soil. The purposes of tillage are to develop soil structure, kill weeds, and manage crop residue. A seedbed is where seeds germinate and young plants grow; it must be firm for seed contact but porous for air and water movement. Good soil tilth is developed by tilling at the proper time and depth to maintain proper soil structure and aggregation without compaction. Minimum tillage delays primary tillage until seeding, leaving more crop residue on the soil surface to conserve moisture and reduce erosion while still controlling weeds chemically. Contour tillage and terracing help slow water runoff across sloped fields.
What is tillage A Presentation By Mr Allah Dad Khan Agriculture Expert KPK ...Mr.Allah Dad Khan
Tillage has a long history dating back to the 16th century when wooden plows were used. Over subsequent centuries, plow designs evolved to include cast iron, steel, and specialized chisel and coulter plows. Tillage is defined as the mechanical modification of soil structure through cutting, crushing, and mixing actions. The benefits of tillage include soil conditioning, weed suppression, residue management, and nutrient release. However, tillage can also negatively impact soils by causing compaction, crusting, erosion, organic matter loss, and altering soil biology.
Tillage refers to agricultural practices that mechanically agitate soil, such as plowing, stirring, digging, and overturning. It is often classified into primary and secondary tillage based on depth and thoroughness. Primary tillage like plowing produces a rough surface, while secondary tillage creates a smoother seedbed. Tillage can have both positive effects, like aerating soil and destroying weeds, and negative effects, such as increased erosion and loss of nutrients. Modern no-till and conservation tillage methods are increasingly used as alternatives to minimize environmental impacts.
Tillage and tith are important for soil health and crop growth. Tillage refers to working the surface soil to create favorable conditions for crop establishment, growth, and yield. There are two types of tillage - preparatory and special purpose. Preparatory tillage includes primary tillage using plows or tractors on new land, and secondary tillage like harrowing to create good soil structure. Zero tillage involves minimum soil disturbance and control of weeds through non-mechanical means. Tillage provides benefits like improved water holding capacity, aeration, and nutrient availability through enhanced organic matter breakdown. However, too much or improperly timed tillage can damage soil structure and increase erosion.
Tillage is the agricultural preparation of soil by mechanical agitation of various types, such as digging, stirring, and overturning. It is an important method used for control of weeds.
Conservation tillage, Practices used in Conservation Tillagescience book
This is presentation on topic of Conservation Tillage, it gives You information about conservation tillage, types of conservation tillage, Practices used in conservation tillage. It enhanced Your knowledge about conservation tillage.
There are several types of tillage operations that are carried out throughout the year depending on the crop and soil conditions. Primary tillage such as deep ploughing is used to turn over large clods of soil and kill pests and weeds. Secondary tillage such as harrowing is then used for finer cultivation to further break up clods and uproot remaining weeds. After seedbed preparation, crops like wheat and soybean are sown on flat, levelled fields. During the growing season, after tillage operations like fertilizer application, earthing up, and inter-cultivation are used to support crops.
Tillage and tilth involve mechanical soil manipulation to create ideal conditions for plant growth. Tillage includes primary tillage like ploughing to open soil and secondary tillage like harrowing to break clods. The objectives are to prepare seedbeds, control weeds, aerate soil, and mix amendments. On-season tillage occurs before planting while off-season tillage conditions soil for future crops. Different tillage types include subsoiling to break hardpans and puddling for rice where soil is tilled under water. The depth and number of tillage operations varies by crop needs and soil conditions.
Tillage refers to mechanically preparing and maintaining soil. The purposes of tillage are to develop soil structure, kill weeds, and manage crop residue. A seedbed is where seeds germinate and young plants grow; it must be firm for seed contact but porous for air and water movement. Good soil tilth is developed by tilling at the proper time and depth to maintain proper soil structure and aggregation without compaction. Minimum tillage delays primary tillage until seeding, leaving more crop residue on the soil surface to conserve moisture and reduce erosion while still controlling weeds chemically. Contour tillage and terracing help slow water runoff across sloped fields.
What is tillage A Presentation By Mr Allah Dad Khan Agriculture Expert KPK ...Mr.Allah Dad Khan
Tillage has a long history dating back to the 16th century when wooden plows were used. Over subsequent centuries, plow designs evolved to include cast iron, steel, and specialized chisel and coulter plows. Tillage is defined as the mechanical modification of soil structure through cutting, crushing, and mixing actions. The benefits of tillage include soil conditioning, weed suppression, residue management, and nutrient release. However, tillage can also negatively impact soils by causing compaction, crusting, erosion, organic matter loss, and altering soil biology.
Tillage is the manipulation of soil with tools & implements for loosening the surface crust & bringing about conditions favorable for the germination of seeds and the growth of crops.
soil condition resulting from tillage
good Tilth - soft, friable & properly aerated
crop emergence, establishment, growth and development
easy infiltration of water & are retentive of moisture for satisfactory growth of plants
To prepare the seed bed to a satisfactory level which promotes good germination and establishment of the seedlings
To control weeds and improve close plant-soil interaction in the rooting zone.
To loosen the soil for easy penetration and proliferation
To remove the other sprouting materials in the soil
To modify the soil temperature
To break hard soil pans and improve drainage facilities
To manage the plant residues by incorporating into the soil or to retain on the top layer to reduce erosion.
To improve the physical conditions of the soil
To harvest rain water easily and soil erosion can be minimised.
To establish specific surface configurations for sowing, irrigation, drainage, etc.
To incorporate and mix applied fertilizers and manures into the soil.
To destroy the eggs and larvae of insects and their breeding places.
This document discusses tillage practices and implements. It defines tillage as the mechanical manipulation of soil to improve physical conditions for plant growth. The primary aims of tillage are producing suitable soil structure, controlling weeds and moisture, and incorporating organic matter. Objectives include improving soil tilth, manipulating plant residues, managing water and air in soil, and controlling pests. Various tillage implements are described for primary tillage like moldboard plows and secondary tillage like disc harrows. The effects of different tillage practices and appropriate implements are discussed for different soil and climate conditions.
Tillage is the physical manipulation of soil using tools and implements to improve soil tilth for better plant growth. Primary tillage implements include the mouldboard plough, disc plough, and reversible plough, while secondary tillage implements are cultivators, harrows, and seed drills. Tillage aims to create good soil structure and control weeds through mulch tillage.
Crop residue management is a year-round process that aims to maintain sufficient crop residue cover. It influences all field operations and the amount, orientation, and distribution of residue. Conservation tillage systems like no-till, mulch-till and ridge-till leave over 30% residue cover after planting by disturbing only strips or the top of ridges during planting. Maintaining residue cover reduces erosion and improves soil quality. No-till provides environmental benefits due to mulch cover but soil improvement takes years of continuous use along with other practices like crop rotations and cover crops.
Tillage glossary A Presentation By Mr Allah Dad Khan Agriculture Expert KPK ...Mr.Allah Dad Khan
Bulk density measures soil compaction and can limit root growth when exceeding thresholds that vary by soil texture. Conservation tillage maintains at least 30% ground cover or 1,000 lbs/acre of residue after planting to reduce erosion. Intensive tillage disturbs the entire soil surface before and during planting, leaving little residue and requiring chemical weed control. Surface sealing occurs when raindrops impact bare soil, concentrating fine particles at the surface and impeding infiltration. Disks are implements with circular blades used to cut residue, break up soil structure, and level the surface. Inversion tillage buries residues by flipping over a layer of soil, leaving the surface bare and susceptible to erosion.
Healthy soil contains microorganisms, organic matter, and nutrients that are essential for plant growth. To create conditions where microbes thrive, soil should be kept cool, dark, and moist by using plants, mulch, and minimizing disturbance. When preparing degraded land, observing existing plant life and soil properties can help determine amendments like compost, cover crops, biochar, and manure to improve soil quality. Proper soil preparation and amendment is crucial for supporting life on Earth.
Tillage is a piece of farm equipment used for the preparation of the soil by mechanical agitation of various types, such as digging, mixing, and overturning.
Examples of human-powered tilling techniques using hand tools include shoveling, gathering, mattock work, hoeing, and raking. The meaning of “Tillage” is the land that can be tilled.
There are various types of tillage implement like rotary tiller or rotavator, plough, harrow, cultivator, subsoiler and many more used in agriculture activity
Tillage is the mechanical manipulation of soil to provide favorable conditions for crop production. It involves operations like ploughing, harrowing, and weed control. The objectives of tillage are to prepare a seedbed, add nutrients and organic matter to soil, aerate the soil, control weeds, and increase water holding capacity. Primary tillage like ploughing is used to open up land for crop production while secondary tillage implements such as disc harrows and cultivators are used for finer soil operations after primary tillage. Different tillage implements are made of materials suitable for their various components and functions.
Tillage operations are carried out to prepare soil for planting crops by improving tilth. Good tilth refers to soil that is porous and friable with balanced capillary and non-capillary pores. The objectives of tillage include preparing seed beds, controlling weeds, conserving soil and water, improving soil structure and aeration, increasing permeability, and destroying pests. Tillage influences soil physical properties like pore space, structure, bulk density and water content. Primary tillage includes plowing using various plows, while secondary tillage further breaks up clods and prepares seed beds through harrowing and planking. Minimum tillage aims to reduce tillage operations and their negative impacts.
The document discusses different methods for preparing soil for planting crops. It describes various tillage techniques like plowing, rotavating, and digging that can loosen and aerate the soil. Single digging and double digging techniques are explained for turning over soil layers. While tillage can improve soil conditions, it can also reduce organic matter and harm soil organisms. The main purposes of land preparation are to put the soil in optimal physical condition for plant growth and development.
The document discusses different conservation tillage systems such as ridge tillage and no-till. Ridge tillage uses specialized planters and cultivators to maintain permanent ridges for row crops, while no-till does not use tillage and simply plants crops into previous crop residues. No-till provides soil erosion control and requires fewer field passes but may have issues with weeds, pests, and slower soil warming. The document also describes an innovative no-till system developed by Steve Groff that uses cover crops and a roller to prepare fields with little herbicide.
This document discusses various tillage systems and implements used in agriculture. It describes seasonal, off-seasonal and special purpose tillage operations. For seasonal tillage, it explains preparatory tillage including primary and secondary tillage. Primary tillage implements discussed are the mouldboard plough, disc plough, chisel plough and subsoiler. Secondary tillage implements mentioned are harrows, cultivators and rollers. The document also provides details on traditional desi and mesion ploughs as well as modern tractor-drawn implements used for different tillage purposes.
SALT is a diversified farming system which can be considered agroforestry since rows of permanent shrubs like coffee, cacao, citrus and other fruit trees are dispersed throughout the farm plot.
The strips not occupied by permanent crops, however, are planted alternately to cereals (corn, upland rice, sorghum, etc.) or other crops (sweet potato, melon, pineapple, castor bean, etc.) and legumes (soybean, mung bean, peanut, etc.).
The document discusses various types of tillage and land preparation equipment used in agriculture. It defines tillage as modifying the soil structure to create suitable conditions for plant growth. Primary tillage like plows are used to break up soil while secondary tillage implements such as disc harrows and cultivators further break up soil clods and level the surface. Conservation tillage is also discussed, which leaves over 30% of the soil surface covered with residue to reduce erosion. Proper tillage is necessary to control weeds, aerate the soil, and prepare high quality seedbeds for crop growth.
This document discusses tools and equipment for conservation agriculture. It begins by contrasting traditional tillage practices with minimum tillage and no-till approaches. It then describes various tillage implements like rippers, subsoilers, and chisel plows that can be used for minimum tillage. Direct seeding equipment is also discussed, including hand tools, animal-drawn planters, and motorized planters. Cover crop management techniques like mechanical and chemical weed control are also outlined. The document emphasizes the importance of only tilling where crops will be planted to preserve soil cover and minimize disturbance in conservation agriculture.
To prepare land for planting vegetables, proper soil preparation is essential. Land preparation has evolved over time from manual to mechanized processes. The key steps to prepare soil for a vegetable garden are: 1) remove existing vegetation from the garden area, 2) analyze the soil quality, 3) till the soil to break it up and remove debris, 4) mix compost or fertilizer into the tilled soil to enrich it, and 5) allow the cultivated soil to sit before planting to improve soil structure and fertility. Proper land preparation helps ensure good crop establishment and yield.
Dr. Sjoerd Duiker - Repairing ravaged soilsJohn Blue
Repairing ravaged soils - Dr. Sjoerd Duiker, Extension Agronomist, Penn State University, from the 2020 Conservation Tillage and Technology Conference, held March 3-4, 2020, Ada, OH, USA.
Puddling involves saturating soil and breaking up aggregates through plowing and harrowing when the soil is flooded or saturated. This process is important for rice cultivation as it controls weeds, conserves water, and makes transplanting easier. However, puddling also destroys the soil structure, reduces pore space, increases compaction, and can lead to issues like waterlogging over the long term. Puddling decreases hydraulic conductivity and permeability while increasing bulk density, moisture retention, and causing changes to the soil thermal properties. Overall, puddling improves conditions for rice growth but degrades the soil physical properties.
This document discusses various agronomic measures for soil conservation. It defines contour cultivation as conducting agricultural activities like plowing and sowing across the slope of the land. This reduces soil and water loss by interrupting runoff. Choice of crops and cropping systems can also impact soil conservation, with close-growing crops providing better protection than row crops. Other agronomic measures discussed include strip cropping, cover crops, mulching, and applying manures/fertilizers. Mechanical measures to conserve soil include contour bunding, graded bunding, bench terracing, and vegetative barriers.
This document discusses various aspects of tillage including definitions, objectives, types, and modern concepts. Tillage refers to mechanical soil manipulation to prepare optimal conditions for seed germination and crop growth. The main objectives of tillage are to prepare seedbeds, control weeds, aerate soil, and incorporate amendments uniformly. Types include on-season (preparatory, after cultivation) and off-season tillage. Modern concepts emphasize minimum tillage, zero-tillage, stubble mulching, and conservation tillage to reduce impacts of conventional tillage. Main field preparation involves primary, secondary tillage, and seedbed formation.
The document discusses various processes of soil erosion by wind and water. Wind erosion primarily occurs through saltation, which moves particles up to 0.4mm in diameter through a series of jumps, and can create blowouts on dunes. Water erosion involves raindrop impact, rainsplash, sheetwash, and the formation of rills and gullies. Farming practices like excessive tillage and removing vegetation can increase erosion risk, resulting in loss of nutrients, sedimentation in reservoirs, and reduced soil productivity. Methods to prevent erosion include maintaining soil structure, providing organic matter, using windbreaks, mulching, and contour plowing.
Tillage is the manipulation of soil with tools & implements for loosening the surface crust & bringing about conditions favorable for the germination of seeds and the growth of crops.
soil condition resulting from tillage
good Tilth - soft, friable & properly aerated
crop emergence, establishment, growth and development
easy infiltration of water & are retentive of moisture for satisfactory growth of plants
To prepare the seed bed to a satisfactory level which promotes good germination and establishment of the seedlings
To control weeds and improve close plant-soil interaction in the rooting zone.
To loosen the soil for easy penetration and proliferation
To remove the other sprouting materials in the soil
To modify the soil temperature
To break hard soil pans and improve drainage facilities
To manage the plant residues by incorporating into the soil or to retain on the top layer to reduce erosion.
To improve the physical conditions of the soil
To harvest rain water easily and soil erosion can be minimised.
To establish specific surface configurations for sowing, irrigation, drainage, etc.
To incorporate and mix applied fertilizers and manures into the soil.
To destroy the eggs and larvae of insects and their breeding places.
This document discusses tillage practices and implements. It defines tillage as the mechanical manipulation of soil to improve physical conditions for plant growth. The primary aims of tillage are producing suitable soil structure, controlling weeds and moisture, and incorporating organic matter. Objectives include improving soil tilth, manipulating plant residues, managing water and air in soil, and controlling pests. Various tillage implements are described for primary tillage like moldboard plows and secondary tillage like disc harrows. The effects of different tillage practices and appropriate implements are discussed for different soil and climate conditions.
Tillage is the physical manipulation of soil using tools and implements to improve soil tilth for better plant growth. Primary tillage implements include the mouldboard plough, disc plough, and reversible plough, while secondary tillage implements are cultivators, harrows, and seed drills. Tillage aims to create good soil structure and control weeds through mulch tillage.
Crop residue management is a year-round process that aims to maintain sufficient crop residue cover. It influences all field operations and the amount, orientation, and distribution of residue. Conservation tillage systems like no-till, mulch-till and ridge-till leave over 30% residue cover after planting by disturbing only strips or the top of ridges during planting. Maintaining residue cover reduces erosion and improves soil quality. No-till provides environmental benefits due to mulch cover but soil improvement takes years of continuous use along with other practices like crop rotations and cover crops.
Tillage glossary A Presentation By Mr Allah Dad Khan Agriculture Expert KPK ...Mr.Allah Dad Khan
Bulk density measures soil compaction and can limit root growth when exceeding thresholds that vary by soil texture. Conservation tillage maintains at least 30% ground cover or 1,000 lbs/acre of residue after planting to reduce erosion. Intensive tillage disturbs the entire soil surface before and during planting, leaving little residue and requiring chemical weed control. Surface sealing occurs when raindrops impact bare soil, concentrating fine particles at the surface and impeding infiltration. Disks are implements with circular blades used to cut residue, break up soil structure, and level the surface. Inversion tillage buries residues by flipping over a layer of soil, leaving the surface bare and susceptible to erosion.
Healthy soil contains microorganisms, organic matter, and nutrients that are essential for plant growth. To create conditions where microbes thrive, soil should be kept cool, dark, and moist by using plants, mulch, and minimizing disturbance. When preparing degraded land, observing existing plant life and soil properties can help determine amendments like compost, cover crops, biochar, and manure to improve soil quality. Proper soil preparation and amendment is crucial for supporting life on Earth.
Tillage is a piece of farm equipment used for the preparation of the soil by mechanical agitation of various types, such as digging, mixing, and overturning.
Examples of human-powered tilling techniques using hand tools include shoveling, gathering, mattock work, hoeing, and raking. The meaning of “Tillage” is the land that can be tilled.
There are various types of tillage implement like rotary tiller or rotavator, plough, harrow, cultivator, subsoiler and many more used in agriculture activity
Tillage is the mechanical manipulation of soil to provide favorable conditions for crop production. It involves operations like ploughing, harrowing, and weed control. The objectives of tillage are to prepare a seedbed, add nutrients and organic matter to soil, aerate the soil, control weeds, and increase water holding capacity. Primary tillage like ploughing is used to open up land for crop production while secondary tillage implements such as disc harrows and cultivators are used for finer soil operations after primary tillage. Different tillage implements are made of materials suitable for their various components and functions.
Tillage operations are carried out to prepare soil for planting crops by improving tilth. Good tilth refers to soil that is porous and friable with balanced capillary and non-capillary pores. The objectives of tillage include preparing seed beds, controlling weeds, conserving soil and water, improving soil structure and aeration, increasing permeability, and destroying pests. Tillage influences soil physical properties like pore space, structure, bulk density and water content. Primary tillage includes plowing using various plows, while secondary tillage further breaks up clods and prepares seed beds through harrowing and planking. Minimum tillage aims to reduce tillage operations and their negative impacts.
The document discusses different methods for preparing soil for planting crops. It describes various tillage techniques like plowing, rotavating, and digging that can loosen and aerate the soil. Single digging and double digging techniques are explained for turning over soil layers. While tillage can improve soil conditions, it can also reduce organic matter and harm soil organisms. The main purposes of land preparation are to put the soil in optimal physical condition for plant growth and development.
The document discusses different conservation tillage systems such as ridge tillage and no-till. Ridge tillage uses specialized planters and cultivators to maintain permanent ridges for row crops, while no-till does not use tillage and simply plants crops into previous crop residues. No-till provides soil erosion control and requires fewer field passes but may have issues with weeds, pests, and slower soil warming. The document also describes an innovative no-till system developed by Steve Groff that uses cover crops and a roller to prepare fields with little herbicide.
This document discusses various tillage systems and implements used in agriculture. It describes seasonal, off-seasonal and special purpose tillage operations. For seasonal tillage, it explains preparatory tillage including primary and secondary tillage. Primary tillage implements discussed are the mouldboard plough, disc plough, chisel plough and subsoiler. Secondary tillage implements mentioned are harrows, cultivators and rollers. The document also provides details on traditional desi and mesion ploughs as well as modern tractor-drawn implements used for different tillage purposes.
SALT is a diversified farming system which can be considered agroforestry since rows of permanent shrubs like coffee, cacao, citrus and other fruit trees are dispersed throughout the farm plot.
The strips not occupied by permanent crops, however, are planted alternately to cereals (corn, upland rice, sorghum, etc.) or other crops (sweet potato, melon, pineapple, castor bean, etc.) and legumes (soybean, mung bean, peanut, etc.).
The document discusses various types of tillage and land preparation equipment used in agriculture. It defines tillage as modifying the soil structure to create suitable conditions for plant growth. Primary tillage like plows are used to break up soil while secondary tillage implements such as disc harrows and cultivators further break up soil clods and level the surface. Conservation tillage is also discussed, which leaves over 30% of the soil surface covered with residue to reduce erosion. Proper tillage is necessary to control weeds, aerate the soil, and prepare high quality seedbeds for crop growth.
This document discusses tools and equipment for conservation agriculture. It begins by contrasting traditional tillage practices with minimum tillage and no-till approaches. It then describes various tillage implements like rippers, subsoilers, and chisel plows that can be used for minimum tillage. Direct seeding equipment is also discussed, including hand tools, animal-drawn planters, and motorized planters. Cover crop management techniques like mechanical and chemical weed control are also outlined. The document emphasizes the importance of only tilling where crops will be planted to preserve soil cover and minimize disturbance in conservation agriculture.
To prepare land for planting vegetables, proper soil preparation is essential. Land preparation has evolved over time from manual to mechanized processes. The key steps to prepare soil for a vegetable garden are: 1) remove existing vegetation from the garden area, 2) analyze the soil quality, 3) till the soil to break it up and remove debris, 4) mix compost or fertilizer into the tilled soil to enrich it, and 5) allow the cultivated soil to sit before planting to improve soil structure and fertility. Proper land preparation helps ensure good crop establishment and yield.
Dr. Sjoerd Duiker - Repairing ravaged soilsJohn Blue
Repairing ravaged soils - Dr. Sjoerd Duiker, Extension Agronomist, Penn State University, from the 2020 Conservation Tillage and Technology Conference, held March 3-4, 2020, Ada, OH, USA.
Puddling involves saturating soil and breaking up aggregates through plowing and harrowing when the soil is flooded or saturated. This process is important for rice cultivation as it controls weeds, conserves water, and makes transplanting easier. However, puddling also destroys the soil structure, reduces pore space, increases compaction, and can lead to issues like waterlogging over the long term. Puddling decreases hydraulic conductivity and permeability while increasing bulk density, moisture retention, and causing changes to the soil thermal properties. Overall, puddling improves conditions for rice growth but degrades the soil physical properties.
This document discusses various agronomic measures for soil conservation. It defines contour cultivation as conducting agricultural activities like plowing and sowing across the slope of the land. This reduces soil and water loss by interrupting runoff. Choice of crops and cropping systems can also impact soil conservation, with close-growing crops providing better protection than row crops. Other agronomic measures discussed include strip cropping, cover crops, mulching, and applying manures/fertilizers. Mechanical measures to conserve soil include contour bunding, graded bunding, bench terracing, and vegetative barriers.
This document discusses various aspects of tillage including definitions, objectives, types, and modern concepts. Tillage refers to mechanical soil manipulation to prepare optimal conditions for seed germination and crop growth. The main objectives of tillage are to prepare seedbeds, control weeds, aerate soil, and incorporate amendments uniformly. Types include on-season (preparatory, after cultivation) and off-season tillage. Modern concepts emphasize minimum tillage, zero-tillage, stubble mulching, and conservation tillage to reduce impacts of conventional tillage. Main field preparation involves primary, secondary tillage, and seedbed formation.
The document discusses various processes of soil erosion by wind and water. Wind erosion primarily occurs through saltation, which moves particles up to 0.4mm in diameter through a series of jumps, and can create blowouts on dunes. Water erosion involves raindrop impact, rainsplash, sheetwash, and the formation of rills and gullies. Farming practices like excessive tillage and removing vegetation can increase erosion risk, resulting in loss of nutrients, sedimentation in reservoirs, and reduced soil productivity. Methods to prevent erosion include maintaining soil structure, providing organic matter, using windbreaks, mulching, and contour plowing.
Soil erosion occurs through water and wind carrying away topsoil. This is harmful because it removes nutrients needed for plant growth. Factors that increase erosion include removal of vegetation, plowing, overgrazing, construction, and mining. Erosion can be reduced through techniques like no-till farming, contour plowing, terracing, and replanting vegetation on disturbed land. Preventing excessive erosion is important for maintaining fertile soils and limiting environmental damage.
Soil erosion occurs through water and wind carrying away topsoil. This is harmful because it removes nutrients needed for plant growth and it takes a long time to recover lost topsoil. Soil erosion is worsened by activities like agriculture, deforestation, overgrazing, and construction which leave soil exposed. To prevent erosion, farmers use techniques like no-till farming, chisel plowing, cover cropping, and contour plowing to minimize disturbance and keep the soil covered. On slopes, terracing creates level areas to reduce runoff. Exposed soil from activities can be controlled through spraying water or containing eroded soil until the land is reclaimed with topsoil and vegetation.
Soil erosion occurs through water and wind carrying away topsoil. This is harmful because it removes nutrients needed for plant growth and it takes a long time to recover lost topsoil. Soil erosion is worsened by activities like agriculture, deforestation, overgrazing, and construction which leave soil exposed. To prevent erosion, farmers use techniques like no-till farming, chisel plowing, cover cropping, and contour plowing to keep soil protected. On slopes, terracing is used to segment steep areas. Exposed soils from activities are controlled through spraying water or containing runoff until the area can be reclaimed with topsoil and vegetation.
Soil erosion occurs through water and wind carrying away topsoil. This is harmful because it removes nutrients needed for plant growth and it takes a long time to recover lost topsoil. Soil erosion is worsened by activities like agriculture, deforestation, overgrazing, and construction which leave soil exposed. To prevent erosion, farmers use techniques like no-till farming, chisel plowing, cover cropping, and contour plowing to keep soil protected. On slopes, terracing is used to segment steep areas. Exposed soils from activities are controlled through spraying water or containing runoff until the area can be reclaimed with topsoil and vegetation.
Soil erosion occurs through water and wind carrying away topsoil. This is harmful because it removes nutrients needed for plant growth and it takes a long time to recover lost topsoil. Soil erosion is made worse by activities like agriculture, deforestation, overgrazing, and construction which leave soil exposed. To reduce erosion, farmers use techniques like no-till farming, chisel plowing, cover cropping, and contour plowing to keep soil protected. On slopes, terracing is used to segment steep areas. Exposed soils from activities are controlled through spraying water or containing runoff until the area can be reclaimed with topsoil and vegetation.
Here are the key steps in preparing land for irrigated and rainfed rice planting:
- Plowing to break up the soil 15 cm deep and incorporate organic matter.
- Harrowing to break up soil clods, incorporate stubbles, and allow weed seeds to germinate. Leveling is also done through harrowing.
- Additional harrowing with 1 week intervals for irrigated fields and 1 day for rainfed to further incorporate plants and allow more weed seeds to germinate.
- Cleaning and repairing levees by patching holes, cracks, and breaks to prevent seepage and pest infestation.
- Fields should rest for at least 30 days between
Soil erosion occurs through water and wind carrying away topsoil. This is harmful because it removes nutrients needed for plant growth. Factors that increase erosion include removal of vegetation, steep slopes, cultivation, forest and grazing land mismanagement. Erosion exceeds soil formation when accelerated by human activities. To reduce erosion, farmers use techniques like no-till farming, cover cropping, and contour plowing to keep soil protected. On slopes, terracing creates flat surfaces to slow water flow. Exposed soils are managed through spraying water or containing eroded areas until revegetation.
Rainfed agriculture and watershed managementChandanGauttam
This document discusses various soil and crop management practices for efficient water utilization in rainfed areas. It describes practices like deep tillage, conservation tillage, making bunds, summer ploughing, mulching, soil amendment, contour farming, and using organic matter to improve soil structure and moisture retention. It also discusses selecting suitable drought-resistant crops and cultivars, proper sowing times, optimal planting patterns and densities, green manuring, and providing protective irrigation at critical growth stages to improve crop yields with limited available water. The overall aim is to enhance water infiltration and storage in soil while reducing evaporation losses, thereby optimizing water utilization under rainfed conditions.
The document discusses how human activities can negatively impact soil. It explains that farming can harm soil through excessive use of fertilizers and overgrazing, which can lead to desertification. Construction and development removes soil and can cause pollution through soil runoff. Mining activities like strip mining and open pit mining result in soil loss and degradation. However, conservation efforts like crop rotation, conservation tillage, terraces, and windbreaks can help conserve soil and reduce erosion.
This document summarizes information about cultivators and puddlers. It describes cultivators as machines that disturb the top soil surface to prepare seedbeds or kill weeds. There are different types of cultivators including animal drawn, semi-mounted, and mounted. Puddling is an important process in wetland rice cultivation that involves repeatedly ploughing and harrowing soil under water to increase its water holding capacity and facilitate transplanting. Rotary tillers and power tillers equipped with cage wheels are commonly used puddling equipment.
Soil erosion is the process by which topsoil is removed from one location and transported to another by water, wind, animals or humans. There are different types of soil erosion including splash erosion caused by raindrops, sheet erosion caused by surface runoff on flat land, rill erosion where runoff forms small channels, and gully erosion where rills deepen into large ditches. Soil erosion can be controlled through methods like establishing ground cover, planting trees and crops, using mulch, and constructing structures like gabions, check dams, and terraces. Controlling soil erosion preserves soil fertility and the environment.
Soil erosion is the removal of topsoil from a region by forces of wind, water, or human activities. It can occur naturally through weathering or be accelerated by human activities like farming. Factors that contribute to soil erosion include wind, rain, improper farming techniques, deforestation, flooding, and human development that removes vegetation. This can turn fertile regions into deserts and cause problems like famines, landslides, and flash floods by reducing the soil's ability to absorb water. Methods to prevent soil erosion include afforestation, crop rotation, terrace farming, providing drainage canals, and planting trees/grass along with river embankments.
conservation agriculture ; concept and technology interventiondeepakrai26
Conservation agriculture is an approach to managing agro-ecosystems that focuses on improved productivity, profits, food security, and preservation of resources and the environment. It has three key principles: continuous minimum mechanical soil disturbance, permanent organic soil cover, and crop rotation. Direct seeding or planting with minimum soil disturbance is used to maintain soil cover, as are herbicides for weed control. Permanent soil cover protects the soil and benefits organisms and moisture levels. Crop rotation recycles nutrients and increases biodiversity below ground. Adopting conservation agriculture provides economic benefits through reduced costs and labor needs as well as improved soil structure and moisture over time, leading to agronomic and environmental benefits.
Soil erosion is the removal of topsoil from the land, primarily due to human mismanagement. There are three main types of erosion: sheet erosion caused by moving water, gully erosion from water in steep areas, and wind erosion in dry bare areas. Some key causes are overgrazing, cultivation on steep slopes, overcropping, and deforestation. To conserve soils, proper land management techniques can be used, including terracing, strip cropping, crop rotation, contour ploughing, reforestation, and windbreaks. These practices help reduce runoff and protect soil from heavy rainfall and winds.
This document discusses different concepts of tillage including conventional tillage, minimum tillage, zero tillage, stubble mulch tillage, and conservation tillage. Conventional tillage uses heavy plows which can create hard pans and increase soil degradation over time. Minimum tillage aims to reduce tillage operations to only what is necessary for seeding. Zero tillage plants new crops without any soil preparation or tillage by controlling weeds with herbicides. Stubble mulch tillage leaves crop residues on the soil surface year-round. Conservation tillage conserves soil and moisture by keeping organic residues on the surface rather than incorporating them into the soil.
This document discusses various concepts related to soil water and soil density. It defines tillage as the preparation of soil for planting and cultivation after planting. It describes different types of conventional tillage like primary and secondary tillage. It also discusses conservation tillage techniques like no-till that minimize soil disruption. The document then covers topics like soil porosity, bulk density, particle density, and factors that affect them. It describes how soil compaction and texture influence properties like strength and root growth. Finally, it discusses concepts like soil water retention, hydraulic conductivity, and matric and osmotic potential.
Intercultural practices ,Cultural practices in AgreculturalSamraz Qasim
This document discusses various intercultural practices for crops including weeding, mulching, earthing up, thinning, and gap filling. Weeding involves removing weeds to reduce competition for crops. Mulching involves covering the soil to conserve moisture by reducing evaporation. Earthing up lifts soil around crop bases to improve anchorage and prevent lodging. Thinning removes excess seedlings to avoid overcrowding. Gap filling replants areas where seedlings did not establish to optimize plant population. The goal of thinning and gap filling is to ensure an optimum plant density. Various tools are used for different intercultural operations.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat Plein
Tillage practices a guide
1.
2. Abstract
Tillage has been used for millennia to prepare the soil prior to sowing many of the annual grain crops. It
involves applying power to break up and rearrange the entire topsoil structure. It has the primary aim of
destroying weeds and pests but is also important for incorporating, redistributing or releasing nutrients
and making the soil texture suitable for seed sowing, seed germination and for easy penetration of
seedling roots.
Introduction
The English word “tillage” is derived from the Old English “tillen” which means “to toil”. With only
human or animal power available, it took a long time and much toil to till even moderate-sized areas of
land. When tractors became available, larger areas could be cultivated per person.
Tractors and their increasing power also made it possible to expand cropping areas into more difficult
soils. In time this created problems in less robustly structured soils with many loamy and fine-textured
topsoils weakening within a few years of tractors replacing animal teams for tillage. Fortunately, such
weakening is reversible.
In the absence of tillage, structural stability of soil aggregates improves after several years under, for
example, subterranean clover pasture. Surface water runoff can increase following tillage on many soils,
causing increased water erosion particularly on sloping cropland. Erosion by wind is also increased by
tillage because the topsoil is left bare and loose. Other potentially undesired effects of tillage include
reducing soil organic matter through oxidation and deleterious effects on soil micro flora and fauna, also
leading to reduced soil structural stability and increased surface runoff and water or wind erosion. If it
were possible to retain the desired effects of tillage while reducing or removing the problems it can
generate, that would be a major step forward.
1.0 Tillage practices have a direct correlation to soil health
Farmers have a direct impact on soil quality through many of their field practices, including tillage. Many
areas, including Michigan, have experienced a heightened sense of awareness of the importance of soil
quality. Farmers have a direct impact on soil quality through many of their field practices, including
tillage.
Soil erosion from wind and water increases as tillage of a field increases. Though the soil may not move
off the field, it will be moved from higher to lower elevations, causing some parts of the field to be less
productive.
According to the Michigan State University Extension, compaction is also a common side effect of tillage
– at the soil surface, the plow layer and the subsoil. Crusting at the surface happens when unprotected
wet soil particles are pounded together to form a thin, dense surface layer. This hard surface inhibits
water from infiltrating down through the soil profile. It will also increase the potential for water runoff
after rain or snow.
3. Compaction at the plow layer not only causes problems with production but also makes seedbed
preparation more labor-intensive. Compacted soils require a secondary tillage followed by a packing tool
to make a good seedbed and ensure a good plant stand. Every pass over the field – for any type of tillage
or by other farm tools – can break up soil aggregates and reduce the ability of the soil to hold moisture.
Heavily tilled fields may have a good seedbed for planting, but any rainfall after planting may cause the
surface to seal, resulting in surface compaction. Some soil at this point will harden, reducing plant
viability. Soils will soften when it rains again, but plants will suffer as soon as it dries out.
Subsoil compaction, or plow pan, is compaction below the tilled surface layer. The pressure of tillage
equipment pressing on the subsoil can cause this. The pressure of tractor tires on moldboard-plowed
furrows also can cause subsoil compaction. The effect of subsoil compaction can be exacerbated when
fields are tilled when they’re wet.
Many farmers are addressing the compaction problem by using a minimal tillage system. There are
several types of minimal tillage systems with various degrees of soil disturbance. With no-till, the soil is
not disturbed during planting and a high amount of crop residue remains on the soil surface. With ridge-
till, the seedbed is prepared on ridges. The soil between the ridges is undisturbed, and the residue is left
between the ridges. Mulch-till involves a minimal amount of disturbance prior to tillage. Chisel plowing
is a common type of mulch-till.
An important part of all of these practices is that residue is left on the field. Michigan State University
Extension educator Paul Gross visited several fields throughout IsabellaCounty during the fall of 2012
and measured the amount of residue left after various tillage types. His findings are illustrated in the
accompanying photos, which show that limited tillage greatly reduced compaction.
Fall tillage is a common practice on many Michigan farms. Farmers should understand how this and
other tillage practices affect their soils and their subsequent crops. The challenge is that no two farming
4. systems are exactly the same, so farmers need to find a way to reduce tillage that will work for their
individual farms. Some may need to use more than one tillage practice in their crop rotations.
2.0 Types of Tillage
Tillage operations are broadly grouped into two types based on the time. Types of Primary Tillage
Depending upon the purpose or necessity, different types of tillage are carried out. They are deep
ploughing, subsoiling and year-round tillage.
Deep Tillage
Deep ploughing turns out large sized clods, which are baked by the hot sun when it is done in summer.
These clods crumble due to alternate heating and cooling and due to occasional summer showers. This
process of gradual disintegration of clods improves soil structure. The rhizomes and tubers of perennial
weeds (world's problematic weeds viz., Cynodon dactylon and Cyperus rotundus) die due to exposure to
hot sun. Summer deep ploughing kills pests due to exposure of pupae to hot sun.
A deep tillage of 25-30 cm depth is necessary for deep rooted crop like pigeonpea while moderate deep
tillage of 15-20 cm is required for maize.
Deep tillage also improves soil moisture content. However the advantage of deep tillage in dry farming
condition depends on rainfall pattern and crop.
It is advisable to go for deep ploughing only for long duration, deep rooted crops. Depth of ploughing
should be related to the amount of rainfall that it can wet.
Subsoiling
5. Hard pans may be present in the soil which restrict root growth of crops. These may be silt pans, iron or
aluminium pans, clay pans or -man-made pans. Man-made pans are tillage pans induced by repeated
tillage at the same depth. Root growth of crops is confined to top few centimetres of soil where deep
penetration of roots is inhibited by hard pans.
For example, cotton roots grow to a depth of 2 m in deep alluvial soil without any pans. When hard pans
are present, they grow only up to hard pan, say 15-20 cm.
Similarly, vertical root growth of sugarcane is restricted due to hard pans and it is not compensated by
horizontal spread. Subsoiling is breaking the hard pan without inversion and with less disturbance of top
soil. A narrow cut is made in the top soil while share of the subsoiler shatters hard pans. Chisel ploughs
are also used to break hard pans present even at 60-70 cm. The effect of subsoiling does not last long.
To avoid closing of subsoil furrow, vertical mulching is adopted.
Year-round Tillage
Tillage operations carried out throughout the year are known as year-round tillage. In dry farming
regions, field preparation is initiated with the help of summer showers. Repeated tillage operations are
carried out until sowing of the crop. Even after harvest of the crop, the field is repeatedly ploughed or
harrowed to avoid weed growth in the off season.
Secondary Tillage
Lighter or finer operations performed on the soil after primary tillage are known as secondary tillage.
After ploughing, the fields are left with large clods with some weeds and stubbles partially uprooted.
Harrowing is done to a shallow depth to crush the clods and to uproot the remaining weeds and
stubbles. Disc harrows, cultivators, blade harrows etc., are used for this purpose.
6. Planking is done to crush the hard clods to smoothen the soil surface and to compact the soil lightly.
Thus the field is made ready for sowing after ploughing by harrowing and planking. Generally sowing
operations are also included in secondary tillage.
Layout of Seedbed and Sowing
After the seedbed preparation, the field is laid out properly for irrigation and sowing or planting
seedlings. These operations are crop specific. For most of the crops like wheat, soybean, pearl millet,
groundnut, castor etc., fIat levelled seedbed is prepared. After the secondary tillage, these crops are
sown without any land treatments. However, growing crops during rainy season in deep black soils is a
problem due to ill-drained conditions and as tillage is not possible during the rainy season. Broadbed
and furrows (BBF) are, therefore, formed before the onset of monsoon and dry sowing is resorted to.
For some crops like maize, vegetables etc., the field has to be laid out into ridges and furrows. Sugarcane
is planted in the furrows or trenches. Crops like tobacco, tomato, chillies are planted with equal inter
and intra-row spacing so as to facilitate two-way intercultivation. After field preparation, a marker is run
in both the directions. The seedlings are transplanted at the intercepts.
7. Layout of Seedbed
AFTER CULTIVATION
The tillage operations that are carried out in the standing crop are called after tillage. It includes drilling
or side dressing of fertilisers, earthing up and intercultivation.
Earthing up is an operation carried out with country plough or ridge plough so as to form ridges at the
base of the crop. It is done either to provide extra support against lodging as in sugarcane or to provide
more soil volume for better growth of tubers as in potato or to facilitate irrigation as in vegetables.
Intercultivation is working blade harrows, rotary hoes etc., in between the crop rows so as to control
weeds. Intercultivation may also serve as moisture conservation measure by closing deep cracks in black
soils.
2.0 Plow
Moldboard plowing can provide soil pulverization and nearly complete burial of weed seeds and residue.
Secondary tillage operations, such as disking or field cultivation, allow for uniform incorporation of
fertilizers and pesticides and smoothing of the soil surface. Additionally, crop cultivation for weed
control is usually practiced.
Soils that tend to be wet are well suited for a fall moldboard plow system. Plowing speeds up warming
and drying of these soils, thus avoiding spring delays. Although vulnerable to erosion, wet soils are often
relatively flat, thus soil loss caused by runoff may not be a major concern. With fall moldboard plowing,
more time is available in the spring for additional tillage operations. However, on steeper slopes, the
8. potential for soil erosion by water throughout the winter and spring is great because surface residue in
not available to protect the soil. Likewise, in drier climates, the potential for soil erosion by wind is
greater without residue cover.
Spring plowing reduces the potential for wind and water erosion throughout the winter, but the labor
and time requirements in the spring can offset these advantages. Furthermore, spring plowing may
produce clods, which require unplanned tillage operations to develop a seedbed. Excessive soil moisture
losses, especially in dry years, is another disadvantage with spring plowing and the associated secondary
tillage operations.
4.0 Tillage or No-Tillage: High Yields or Soil Health?
The growing emphasis on soil health could be a deciding factor in what type and how much tillage
farmers will utilize in the future.
Dealers who haven’t picked up on the push for “soil health” in the last few years haven’t been paying
enough attention. When you see mention of ag-related trends in media like the New York Times, it’s
probably not because they were looking to write something about agriculture (“Farmers Put Down the
Plow for More Productive Soil,” New York Times, March 9, 2015).
In all likelihood, the collective volume of coverage soil health is getting in local, regional and ag media
somehow got their attention.
9. In many cases, for the general public and mainstream media, when discussing issues such as this, it
tends to center on conservation, the environment and “regulation of agricultural pollution.”
For the farmer, the issue is far more pragmatic. A Texas farmer, who switched to no-tillage in 2005 for
his 6,000 acres, was quoted in the article, and put the issue into “farm” perspective: “My goal is to
improve my soil so I can grow a better crop so I can make more money. If I can help the environment in
the process, fine, but that’s not my goal.”
Farm equipment dealers and manufacturers who make tillage tools are dragged into the debate because
conventional tillage practices are often cast as the villain when the discussion turns to soil health. To
paraphrase Shakespeare’s Hamlet, “To till or not to till, that is the question.” That’s to say, to purchase
tillage equipment or not to purchase tillage equipment is becoming the question.
It’s one that is near and dear to the hearts and wallets of many dealers and equipment makers.
Do farmers who have consistently produced high crop yields by using conventional tillage have to give it
up to attain a high level of soil health? Or is there a middle ground that can produce high yields while
improving soil health?
Soil Health: A New Fervor
The amount of recent attention devoted to soil health is clearly beneficial as a precursor to increasing
crop yields that will be required to feed the extra mouths that will need to be fed in the next 20-30
years. This year has been designated as the International Year of Soils. According to USDA, this year of
10. awareness aims to increase global understanding of the importance of soil for food security and
essential ecosystem functions.
“I think part of the excitement is the catchiness of the new term. Years ago we called it soil quality and
now it’s soil health,” says Tony Vyn, professor of agronomy at Purdue University. “Part of it is also the
growing concern for hypoxia (oxygen depletion) in the Gulf of Mexico and the phosphorous going into
Lake Erie.” These factors, he says, would seem to indicate that there’s significant nutrient loss from the
soil taking place, including phosphorous and nitrogen. “This and increased societal scrutiny have
advanced the notion that we need to increase our attention to soil health.”
He says that farmers need to placate these concerns by emphasizing the positive things they’re doing
through farm practices to hold soil, sediment and phosphorous in place. Vyn cites practices like no-till
and strip-till that improve nutrient cycling through crops, as well as the use of cover crops to avoid
nutrient losses to air and water.
“We’re learning more and more about soil microbes that we have never known before. And if we give
them a good home they work for us,” says Jodi DeJong-Hughes, an extension educator at the University
of Minnesota. “It’s only in the last 5-7 years that we have really talked about soil health. For many
farmers, it’s a really new concept. With a new practice, many farmers will watch other farmers try it out
first. If they are successful, then they’ll give it a try too.”
For Paul Jasa, an extension engineer at the University of Nebraska-Lincoln, all of the talk about soil
health is a wake up call to farmers and the rest of the industry. “Soil health disappeared from the radar
screen when large scale farming really took over and farmers could buy technology and we didn’t have
to worry about soil health.”
Jasa says prior to 1950, everybody was an organic farmer. All of the pesticides, fertilizers and technology
weren’t available. Farmers practiced diversity through crop rotation. They utilized things like green
manure cover crops that boosted soil health.
11. “We became lazy managers with the introduction of commercial fertilizers, pesticide to kill pests and
herbicides to kill weeds. We ignored the importance of a healthy soil system and started doing it with
technology instead,” he says. Jasa points to the emergence of glyphosate-resistant weeds as a more
recent example of how the industry has gotten lazy when it comes to soil health. “Unfortunately, a lot of
our technology serves as a band aid. We are treating the symptoms. We’re not treating the problem
itself.”
He likens issues of soil health to human health. “My doctor says my cholesterol is too high and I need to
lose some weight. It’s a lot easier for me to take a cholesterol-lowering pill than it is to exercise and
watch what I eat.”
Tillage & Tradition
DeJong-Hughes from the University of Minnesota places herself on the tillage side of the debate, but
with a big qualifier — farmers need to reduce it.
“If you reduce your tillage, you will improve your soil health. Whether or not a farmer looks at reducing
their tillage depends on their goals and perceptions. Do they believe profit and reduced tillage are
separate goals? Do they believe the only way to get the highest yield is to aggressively till? Or do they
believe improving soil health will ultimately improve profit and yields?”
She says another aspect of reducing tillage that should get farmers’ attention is it goes hand in hand
with reducing costs. “I’ve seen that by reducing tillage we won’t lose yield, however, we decrease our
inputs, especially fuel and labor, plus it improves soil health. Once farmers see this and get used to it,
they usually keep going in that direction.”
DeJong-Hughes estimates that about 70% of Minnesota farmers utilize a disc ripper, disc chisel and/or a
chisel plow, which she considers “conventional tillage” and which leaves less than 30% residue
compared to a moldboard plow, which leaves less than 15%. “It wasn’t that long ago that moldboard
plowing and leaving the soil black with no ‘trash’ made you a good farmer. We’re trying to show there
are new ways to leave more residue.”
She says the biggest battle in getting farmers to look at new techniques is tradition. “Never
underestimate tradition. If their dads did it and their dad’s dad did it and it worked for them, then why
change?”
When conventional farmers see residue levels created by 3 years of corn-on-corn, they’ll probably pull
out their plows, says DeJong-Hughes. “I’m trying to show them that there are other ways to manage
residues without a plow. If they have a corn/bean rotation, they have a lot more options.”
Regardless of circumstances, DeJong-Hughes is recommending to the farmers she’s working with that
the best approach to tillage is to reduce its depth, number of passes and aggressiveness. “I’m pushing
for the least amount of soil disturbance possible. I’ve suggested that some of them take a look at vertical
tillage to manage heavy residue build-up.”
12. What she’s leaning toward is getting her farmers to consider strip-till. “It’s not going to be ideal for
everyone, but I think it’s the best marriage of no-till and full-width tillage. You can get the seed bed to
warm up while leaving 50-60% residue to protect and build soil health. With strip-till, you incorporate
your nutrients so they’re not sitting on top of the soil, and, if needed, you can also till in lime. In
between the row, you have full residue where you get all your soil health benefits, including erosion
protection, water infiltration and water-storing capacity.
“It’s a long list of benefits for farmers. It’s a wonderful way to reduce tillage but still produce high
yields,” says DeJong-Hughes. When it comes to “pure” no-till, she doesn’t promote it because it is at a
yield disadvantage unless it’s done on sandier soil. “On really nice growing seasons, no problem. When
we have a cold and wet spring, we have research that shows no-till gets hit hard, even in southern
Minnesota.”
On the other hand, she acknowledges that in states west of Minnesota, Iowa and Missouri that have
very little rainfall, no-till can be an excellent solution. “My state and east have a lot more rainfall — 2-3
times more — and we don’t need to preserve the soil moisture like others have to do. In the spring, we
need to get our soil to dry out.”
Though he would prefer that farmers avoid the conventional tillage practices many utilize, Francisco
Arriaga, assistant professor & extension soil scientist at the University of Wisconsin-Madison, says there
are times when some level of tillage is necessary.
He points to this past year when farmers in different parts of Wisconsin needed to harvest in less than
ideal conditions; it was too wet. “They called concerned about compaction and rutting issues to the
point where their ground was not level, so they didn’t have a good seedbed. In this scenario, tillage is
about the only way you can go about it.
“It’s bad enough that they’re probably going to have to do some discing, and what I recommend then is
to check to see if there’s any subsoil compaction. There might be some areas where they have to do
some subsoiling. This is a prime example of not being able to avoid tillage. When conditions are not the
best and it’s time to harvest, the farmers must get in the field. It’s a business after all and they have to
get their crops out,” says Arriaga.
13. He believes crop rotation is an ideal approach to minimize tillage and discourages farmers from planting
corn-on-corn for more than 2 seasons. In instances when they plant corn after corn for 3 or 4 years,
some tillage to address residue buildup will improve yields somewhat, Arriaga says.
“This was the original purpose for developing vertical tillage. It was a pretty good way of addressing the
residue without disturbing the soil too much,” he explains. “But it was meant to be a one-pass
operation. A lot of people are doing multiple passes, sometimes in the fall, sometimes fall and spring,
and this can actually be detrimental. It varies a lot, depending on the manufacturer and the setup of the
implement. It can create severe disruption of the soil, which, in my view, is not a good thing.”
Till/No-Till Middle Ground?
While many soil scientists and extension engineers would prefer that farmers avoid tillage whenever
possible, others believe strongly that it’s often necessary and good, and some believe the middle ground
is where vertical tillage comes in and sets the stage for a farmer to initiate the use of no-till and strip-till.
“Corn is a good example of a crop that really likes tillage if it can get it, and it will respond accordingly by
producing high yields,” says Tom Evans of Great Plains Mfg., a maker of tillage and seeding equipment.
“It’s a different matter if you’re on highly erodible land. Then too much tillage can add to the problem.
“So regarding your question to till or not to till, the answer is yes,” he says. But rather than only
discussing conventional tillage vs. conservation tillage, Evans says there are really three categories that
need to be brought into the conversation: conventional tillage, vertical tillage and no-till.
He goes on to say, conventional tillage, which would typically include a moldboard plow, a disc harrow
and a field cultivator, “needs to cease. Conventional tillage restricts the root system in a lot of crops
because it causes density changes in the soil profile and it’s prone to erosion. When it comes to pure
conventional tillage, I believe it’s a negative for everybody.”
14. Evans maintains that vertical tillage is the ideal method for creating soil density and healthier soils. “It
makes a uniform density as deep as possible and that depends on the farmer’s ground. The idea is to get
as much of the soil profile as practical to a uniform density. To do this, the first time you’re probably
going to run a subsoiler as deep as practical, 12, 14, 16 inches deep to reset the profile.”
Evans makes a point of stressing the use of a subsoiler, not a v-ripper. “A subsoiler will actually pick the
soil up and set it back down and bury no residue if it’s run properly. A v-ripper with a parabolic shank, on
the other hand, is designed to roll the soil over, so it will disturb it way more than what an inline
subsoiler would do.
“Vertical tillage doesn’t work against no-till, it works with no-till,” he explains. “If a farmer is going to
convert to no-till, the first thing he should do is take an inline subsoiler and reset the profile of the soil
and then no-till on top of it. He may not have to subsoil again for years. But that will reset the profile to
a uniform density while you’re no-tilling on top of that.”
It’s All About the Soil
Joe Dedman, vice president of agronomy for Monty’s Plant Food Co., is a proponent of no-till and he has
another theory on the growing attention to soil health. He says, “We’ve pretty much brought everything
that we have in our arsenal to the marketplace, including new chemistries, new genetics and new
varieties. And of course, farmers are paying for that stack of genetics they have in that seed to help
protect it from insects and diseases. At the same time, we’ve not made the jump in yield that should
come along with all this new technology. People are saying, ‘There’s something missing here.’ What
we’ve been missing is paying attention to the health of our soils.”
Dedman also serves on the soil research team at Soil Renaissance, a branch of the Noble Foundation. He
says they’re working to formulate standards to measure soil health which allow producers to know the
condition of their soil, which can affect its production capabilities.
What people are beginning to discover, Dedman explains, is the more they treat their soils like living
organisms and maintain and feed them, the more it benefits the soil’s biology and the more its biology
will increase. “The more it increases, the more it lends to soil health,” he says. “Then you see better crop
yields, better crop quality and better seed test weights. All of these things go together with soil health,
and conservation tillage goes hand-in-hand with better crop yields and soil health.”
The more attention soil biology and soil health get, the more conventional tillage will be scrutinized. He
explains that the soil ecosystem builds networks. Earthworms dig channels through the soil and deposit
all kinds of nutrients and break nutrients down. Conventional tillage destroys these networks every year
when farmers prepare a seedbed. So the biology must to be rebuilt every season, according to Dedman.
“The more emphasis that is put on soil health and the more data that begins to get released, I believe it
will show the tremendous advantage of not tilling the soil as much as we have been. By growing the soil
ecosystem to its maximum potential, we will take yields a lot higher than we’ve ever been able to do.
That’s because it’s all about the soil,” he says.
“Even though tilled soil warms up sooner, it also exposes the biology that’s in the soil on the surface to
too much heat and too much light,” says Dedman. “You could say it kills them. I want the numbers to go
up when we’re talking soil health. Soil health is related to undisturbed soil or where there’s very little
15. soil disturbance to allow the ecosystem to continue to grow and to build and multiply. We need them to
multiply to do all the work for us when we throw the fertilizers down or apply chemicals. We need those
chemicals to break down for next year’s crop.”
Regardless of the new technology to maximize yields, “It still goes back to soil health; feeding the
ecosystem that’s in the field so it works for me,” he says. “There’s a whole new horizon that people are
writing about and digging into and teaching. There are all kinds of things yet to be discovered about soil
health.”
Advocating for No-Till
To say dedicated no-tillers are passionate about what they do would be an understatement. Boak of
Salford says it’s “a bit like a religion. You get guys who start down the road to no-till and they work really
hard to make it work for them. All of a sudden, they’re opposed to anybody who does tillage.”
Jasa of the University of Nebraska. makes no apologies about his stance on no-tilling vs. conventional
tillage. “If you think about it, Mother Nature never tilled her soil. She’s been growing things for a long
time. She has the best soil structures anywhere because it’s never been tilled. That’s what we want to
get producers to do in their fields as well.”
He says when it comes to soil health, tillage is one of the things a lot of people are looking at because it
really hasn’t been considered much before. “Tillage has always broken down soil health and destroyed
some soil structure. No-till is the practice that’s going to build the soil health the best,” Jasa says.
And so when it comes to no-till itself, “Once a farmer builds a good soil structure and no longer destroys
it with tillage, soil health builds. More importantly, the structure allows water infiltration, air and gas
exchange, and better root penetration. Once your soil gets healthy, the need for tillage sort of drops
away. In the past, tillage begot tillage. If a soil was tilled and you didn’t have that air exchange, you had
to till again to fluff it up to get some air exchange to get the plant up and growing. So if tillage was so
good, why do you have to do it again next year? It’s a temporary fix,” says Jasa.
But soil doesn’t get fixed by only parking the tillage implement. It often takes a couple of years before
producers see the change and, according to Jasa, a lot of producers don’t have the patience, especially
those who want to raise a single crop and be done with it.
“If they’re willing to do cover crops, crop rotation and apply livestock manure, they can help jumpstart
soil biology. Then no-till becomes a lot easier and a lot faster,” he says.
What tillage does is “erase some management mistakes,” Jasa adds. “It made us lazy managers.”
For example, if the farmer didn’t do a good job of weed control in the early season, he goes out and tills
again. If he had a crust on his field, he went out and tilled it again, which left little or no soil structure, so
the soil formed a crust again.”
And while they can be valuable tools, Jasa says, Roundup Ready crops made lazy managers out of a lot
of no-tillers. “In some cases, people switched to no-till or Roundup Ready technology because it took
less management than tillage did. Unfortunately, those are the same producers who are having
problems with glyphosate-resistant weeds. Roundup Ready technology is only a tool to be used, but it
has been misused.”
16. When it comes to corn yield, Jasa explains that he’s had a set of tillage plots since 1981 that he uses to
compare no-till to fall plow, fall chisel and spring disc. “The first couple of years until I got the soil
biology working with me, the yields were statistically the same. After about 5 years, no-till has always
been the most profitable statistically. Whether it’s been the highest yield or not isn’t that important. It’s
more profitable because I don’t have the cost of tillage.”
Reference
Suitable methods of tillage for the farm | fao.org | Retrieved on 20.04.2020 from
http://www.fao.org/3/y5146e08.htm
Plough | Retrieved on 20.04.2020 from
https://www.beroni.in/products/tillage/plough
Reversible Mould Board Plough | https://www.fieldking.com/product-portfolio/plough/reversible-
mould-board-plough/
Christina Curell, February 2014 | Tillage practices have a direct correlation to soil health | canr.msu.edu
| Retrieved on 20.04.2020 from
https://www.canr.msu.edu/news/tillage_practices_have_a_direct_correlation_to_soil_health
Dave Kanicki, 2015 | Tillage or No-Tillage: High Yields or Soil Health? | farm-equipment.com | Retrieved
on 20.04.2020 from
https://www.farm-equipment.com/articles/11545-tillage-or-no-tillage-high-yields-or-soil-health
Tillage :: Types of Tillage |agritech.tnau.ac.in| Retrieved on 20.04.2020 from
http://agritech.tnau.ac.in/agriculture/agri_tillage_typesoftillage.html
Plow | cropwatch.unl.edu | Retrieved on 20.04.2020 from
https://cropwatch.unl.edu/tillage/plow
Tilage | Retrieved on 20.04.2020 from
https://farmease.app/category/tillage