to lead global market throw environment friendly solution the new concept is to receive electricity by thermal and pressure effects from the wheelbase

1. 1
Thermopiezo
Electric Power
Generation from
Wheelbase
Submitted by:-
)
SONI ASHISH (ENRL:140210125117)
In fulfilment for the award of the degree
Of
BACHELOR OF ENGINEERING
In
PRODUCTION ENGINEERING
GOVERNMENT ENGINEERING
COLLEGE , BHAVNAGAR
Gujarat Technological University, Ahmadabad
YEAR 2017-2018

2. 2
ACKNOWLEDGEMENT
With the extreme pleasure and senses of obligation we the students involve in
this project wish to express our gratitude to all those who spent their valuable
time and help us to achieve competency in our work.
It gives pleasure to express adequately our intentness to our respected Guide
Assistant Prof. Punit trivedi, who has throughout been a source of
inspiration of versatile knowledge meticulous direction and valuable co-
operation. Without him, this project would not have seen a light of day.
Needless to say that it was a privilege for all of us work to under him
and in such coordinative atmosphere.
We are also greatly thankful to our honourable principal Prof. H S trivedi
Sir and Head of production engineering department Prof. A.G.kunte sir who
permits us to do this type of project and always encouraged and help us.

3. 3
GOVERNMENT ENGINEERING COLLEGE
--------------CERTIFICATE-----------------
This is to certify that Mr. SONI ASHISH of B.E. Semester 7th
PRODUCTION Class, Enrolment No. 140210125117 has satisfactorily
completed my work of the subject Project Report on THERMOPIEZO
ELECTRIC POWER GENERATION FROM WHEELBASE the academic
year 2017 and submitted on / /201 .
Head of Department Staff in
Charge
Certified that this term work is acceptedand assessedon / / .

4. 4
ABSTRACT
Todaytechnologydevelop day by day. So we need to improve ourselves
as well as old technology and instruments. Now a days everyone can not
expenses on power generator device. all time and year by year power storages
like battery is life finished, then it will be changed, So here, we have tried to
develop efficient and commercially economical Thermopiezo electric power
generation from wheelbase.
Advance design on this project in a peltier plate is used which function is to
absorb thermal energy from wheelbase in heat are generated through friction
those heat directly converted in voltages differences.
Which is helping us to optimize the human effort. because Piezo Part sensor
through generated AC voltages and this voltage are used in various application
which our requirements.

5. 5
TABLE OF CONTENTS
SR. NO. TITLE PAGE NO.
Chapter 1
1.1
PROBLEM SUMMARY AND
INTRODUCTION 9
1.2 AIMS ANDOBJECTIVEOF THE PROJECT 10
1.3 Problem specification 10
1.4
BRIEF LITERATURE REVIEW AND PRIOR
ART SEARCH
11
1.5 material / tools required 12
Chapter 2
2 design 13
2.1 designmethodology 13
2.2 CANVASNARRATION 14
2.3 Aeiou summary 14
2.4 Ideationcanvas 15
2.5 Product development canvas 16
Chapter 3
3 implimentation 17
3.1 Design calculations 19
Chapter 4 4 Procedure 21
Chapter 5 5 Advantages 22
Chapter 6 6 Conclusion 23
Chapter 7 7 Reference 23
Chapter 8 8 Plagiarism report 24

6. 6
1.INTRODUCTION
1.1:
PROBLEM SUMMARY AND
INTRODUCTION
 electric vehicles are and they are awesome range
remains their limiting factor. Regenerative braking,
which captures energy otherwise lost as heat and
returns it to the battery, helps here. And engineers
have considered other ways of capturing pressure
from things like the rebound and compression of
shock absorbers
 Most problem of electric vehicle is to charging of
them is we can’t use it while it’s charging. the main
concept behind tier is to produce electricity while
driving itself.
 Another idea is creating electricity through pressure
and thermoelectricity, converting variations in
temperature into electric voltage. Whether they're
sitting in the sun or spinning on the road, tires
generate heat. and produce electricity

7. 7
1.2
AIMS AND OBJECTIVE OF THE PROJECT:
• The main objective of the project is to generate the green energy
from the wheel base of a car while driving it self.
• The energy is produce from the pressure generate and heat
generate from friction.
• The component transform the pressure into a electricity and use it
in a different appliance in vehicle.
• From that green vehicle the pollution level is considerably
decrease the use of petrol and other fuel consumption is going to
decrease.
1.3.
PROBLEM SPECIFICATION
• Now a days the most usage of personal vehicle leads to
pollution due to fuel consumptions
• The rate of fuel are increasing day to day to fulfilment of this
defect the electric vehicle are the most versatile option

8. 8
• The battery are the most expensive which is used in the vehicles
to charge the battery its also a time consuming process.
.
1.4: BRIEF LITERATURE REVIEW AND PRIOR ART
SEARCH
Research publication & patent search
1: Invention is Related to/Class of Invention : Power generation
2: IPC class of the studied patent : G01L17/00
3: Title of Invention : System for
generating electric power from a rotating tire's mechanical energy using
reinforced piezoelectric materials
4: Patent No. : US 6725713 B2
5: Application No. : US 10/345
6: Web link of the studied patent :
https://www.google.com/patents/US6725713
7: Date of Filing/Application : 01/15/2003
8: Priority Date : 05/10/2002
9: Publication/Journal Number - (Issue No. of Journal in which Patent is
published):US6725713 B2
10: Publication Date : 04/27/2004
11: FirstFilled Country : 284
1.5: material / tools required
1. Wheelbase :
2. Piezo electric transducer

9. 9
3. Peltire plate
4. Wires
5. Rectifier
6. Battery
7. Soldering
2. DESIGN
2.1 design methodology

10. 10
• As per above image all the Piezo transducer are connected in
the parallel connection hence the pressure are created the the
Piezo transducer generate power
• That Piezo transducer are assemble on the wheel rim and when
the vehicle is moving due to heat and pressure the electricity is
stored at the battery
2.2: CANVAS NARRATION
• Aeiou summary sheet

11. 11
• Piezoelectric has more life span hence the efficiency of the
product is great it can works on all the environment in summer
we can found the more energy from the wheel
• Due to the automobile field the people who are related to this
firm are interacted like engineers ,developers and common
public
• The wheels are expensive so medium class or high class society
peoples can effort it.

12. 12
• IDEATION CANVAS
• The main idea of the Piezo electric transducer is to producer
energy while exerting force on it
• We can also store energy while the vehicle is also in the motion
• In every situation there are generation of a pressure on a alloy of
wheel
•
product development canvas

13. 13
• This product having green energy which transfer the pressure
and heat into the electrical energy this project having Piezo
electric transducer and pettier plate
• The redesign in only case in the failure of a transducer
• There is also the chances of the wire breakage and electrical
component defect
•
3: Implementation

14. 14
 The Piezo is implied on the wheel base when the pressure is
generated on the wheel due to compression of the road and
wheel the Piezo electric transducer convert it into electricity.
 The outer surface and inner surface having a different
temperature due to peltire plate the more absorption of the
energy.
 That all energy going throw brush to a system battery
 The wires are located in between the rim all the connection are
cooper wires so it can impliments more energy

15. 15
Rs.25 perpiece
Rs.360 per piece
Rs 1000/-

16. 16
 And other accessories are used in project is
capacitor, wires ,rectifier, transformer all that
secondary necessary coasts is 1000/-
Selected components are:
Wheel rim: cylindrical part
Piezo transducer: 12 V, material (Quartz, PZT, PMN-PT)
Battery: LEAD ACID ELECTRIC BATTERIES, NICKEL CADMIUM, NICKEL METAL
HYBRID
:- 12 V 5 A
Design
Calculation:
In 1 square ft. I used 12 piezo
sensor.Minimum voltages (press
Piezo sensor 1 time)=12 v
Maximum voltages(press Piezo
sensor1 time=22v

17. 17
P=choosenumber of Piezo sensor
=5
P = 12*5
 P = 60 W (case in minimum)
 The energy harvested by bonding piezo benders depends
on three factors, namely, tire surface area, rpm at 100km/h,
and bender end-to-end deflection. All of these factors are a
function of tire radius with a larger radius resulting in a
larger surface area, lower rpm, and lower deflection. For
this experiment, we used a 185/65R14 tire: one with layers
running radially (R) across it, with a width of 185mm, a
ratio of the height of the tire's cross-section to its width of
60, and a wheel diameter of 14 inches. Different sizes will
produce different output power depending on the
combination of these factor

18. 18
4 PROCEDURE:-
 When the piezopart filled the pressure existing
between the base and a rim the compression
force react on the Piezo and the heat is
generated on the peltier platethe conversation
of that both energy to electricity is going to
store it the battery via bushes on the wheel rim
 To convert ac power into dc there are some
arrangement of a rectifier
 Also the arrangement of a capacitorand a
transducerwhich can improve the power
 Hence battery is charging on all the way while
vehicle is in moving condition and the
continuousenergy use in the different
application like headlights, air conditioning
system etc.
5. Advantages of thermopiezo transducer wheel base:
• . this approach defies the purpose of having an electrical
driveline: to reduce environmental impact through the use of
renewable energy sources. The need remains for a cleaner

19. 19
power-generation technique that allows maximum range
extension with minimal environmental consequences.
• Long life span
• No fuel consumption
• Free energy without any input
Scope of future
advantage of incorporating piezoelectric materials
into your automotive systems is their extreme
reliability. They can run billions of cycles without
showing signs of fatigue. The small amplitude of
mechanical force applied means our PZT ceramics
are not subject to the same wear and replacement
requirements as other mechanical components on
your vehicles and automotive equipment
Although the future looks bright but the scope for research is
high. The piezoelectric generator technology is in its infancy
at the moment. These materials are always being blamed for
their low efficiency. The energy produced by them is very
little to use for the gadgets. But it’snot very far when people
want somebody to scream loud enough so that their mobile
battery is charged for the day long talking.

20. 20
6. Conclusion:
We have generate a theoretical description on the
project “THERMO PIEZOELECTRIC WHEEL
BASE".
Which is noicefree,pollution free, no
use of fossil fuel AND effective
power generation for long life
7. Reference:
•
https://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&u
act=8&ved=0ahUKEwiwmaj7wM3WAhXFNI8KHRK9BvMQFgglMAA&url=http%3
A%2F%2Fwww.solarfeeds.com%2Fthe-future-of-piezoelectric-
generators%2F&usg=AOvVaw06lu32LvcENeN2wJ2yEk5f
https://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=3&cad=rja&u
act=8&ved=0ahUKEwjX87e0ws3WAhXEsY8KHdAYAAAQFggzMAI&url=https%3A
%2F%2Fwww.wired.com%2F2015%2F03%2Fgoodyear-trying-make-electricity-
generating-tire%2F&usg=AOvVaw1kdj7xgMOfV3colrbziPD4

21. 21
8:Plagiarism report(plagarisma.net)
95% Unique
Total 13639 chars (2000 limit exceeded) , 248 words, 19 unique sentence(s). Essay
Writing Service - Paper writing service you can trust. Your assignment is our priority!
Papers ready in 3 hours! Proficient writing: top academic writers at your service 24/7!
Receive a premium level paper! STORE YOUR DOCUMENTS IN THE CLOUD - 1GB
of private storage for free on our new file hosting!
Results Query Domains (original links) Unique Thermopiezo Electric Power Generation
from WheelbaseSubmitted by Unique - BLOCH NOMAN (ENRL Unique
110210125106) PARMAR AKASH (ENRL Unique 140210125075)SONI ASHISH
(ENRL Unique 140210125117)SUTARIYA HARSHIL (ENRL Unique It gives pleasure
to express adequately our intentness to our respectedGuide Assistant Prof Unique
Without him, this project would not have seena light of day Unique We are also greatly
thankful to our honourable principal Prof Unique H S trivedi Sir and Head of
production engineering department Prof Unique GOVERNMENT ENGINEERING
COLLEGE--------------CERTIFICATE-----------------This is to certify that Mr Unique
BLOCH NOMAN of Unique Semester7th PRODUCTION Class, Enrolment No
16 results GOVERNMENT ENGINEERING COLLEGE--------------CERTIFICATE----
-------------This is to certify that Mr
iitbhu.ac.in nitc.ac.in dme.ap.nic.in geca.ac.in dtemaharashtra.gov.in ldce.ac.in
gate.iitk.ac.in srmuniv.ac.in ctae.ac.in dtekerala.gov.in
Unique PARMAR AKASH of Unique in this project wish to express our gratitude to all
those who spent their valuable Unique Punit trivedi, who has throughout been a source
of inspiration of versatile knowledge meticulous Unique Needless to say that it was a
privilege for all of us work to Unique kunte sir who permits us to do this type of project
and always encouraged and Unique 110210125106 has satisfactorily completed my work
of the subject Project Report on THERMOPIEZO ELECTRIC Unique Head of
Department Staff in ChargeCertified that this term work is accepted and assessedon
Top plagiarizing domains: gate.iitk.ac.in (1 matches); srmuniv.ac.in (1 matches);
ctae.ac.in (1 matches); dtekerala.gov.in (1 matches); ldce.ac.in (1 matches);
dtemaharashtra.gov.in (1 matches); nitc.ac.in (1 matches); dme.ap.nic.in (1 matches);
geca.ac.in (1 matches); iitbhu.ac.in (1 matches);
Thermopiezo Electric Power Generation from WheelbaseSubmitted by:- BLOCH
NOMAN (ENRL:110210125106) PARMAR AKASH (ENRL: 140210125075)SONI
ASHISH (ENRL:140210125117)SUTARIYA HARSHIL (ENRL:140210125118)In
fulfilment for the award of the degreeOfBACHELOR OF
ENGINEERINGInPRODUCTION ENGINEERINGGOVERNMENT ENGINEERING
COLLEGE , BHAVNAGARGujarat Technological University, AhmadabadYEAR
2017-2018ACKNOWLEDGEMENTWith the extreme pleasure and senses of obligation
we the students involve in this project wish to express our gratitude to all those who
spent their valuable time and help us to achieve competency in our work.It gives
pleasure to express adequately our intentness to our respected Guide Assistant Prof.

22. 22
Punit trivedi, who has throughout been a source of inspiration of versatile knowledge
meticulous direction and valuable co-operation. Without him, this project would not
have seena light of day. Needless to say that it was a privilege for all of us work to
under him and in such coordinative atmosphere.We are also greatly thankful to our
honourable principal Prof. H S trivedi Sir and Head of production engineering
department Prof. A.G.kunte sir who permits us to do this type of project and always
encouraged and help us.GOVERNMENT ENGINEERING COLLEGE-------------
CERTIFICATE-----------------This is to certify that Mr. BLOCH NOMAN of B.E.
Semester7th PRODUCTION Class, Enrolment No. 110210125106 has satisfactorily
completed my work of the subject Project Report on THERMOPIEZO ELECTRIC
POWER GENERATION FROM WHEELBASE the academic year 2017 and submitted
on / /201 .Head of Department Staff in ChargeCertified that this term work is accepted
and assessedon / / .GOVERNMENT ENGINEERING COLLEGE--------------
CERTIFICATE-----------------This is to certify that Mr.akash parmar