RedCatt engineers have developed the RedCatt branded transducers utilizing either neodymium or ferrite based magnetic circuits, capable of delivering the highest level of performance, providing consistent, high integrity magnetic flux gaps, ultra low distortion characteristics and high efficiency cooling designs
Presentation on the new EHF-100 amplifier, which is iPod compatible and gives you the sound of a 10k amplifier at a third of the price. Check out rogershighfidelity.com
T&D are distributors for ABB Kabeldon High Voltage Cable Joints, Cable Terminations and Screened Separable Connectors for high voltage XLPE cable terminating and jointing 11kV, 24kV and 33kV. ABB HV cable connectors are premolded screened separable connectors for terminating and connecting XLPE insulated single or three core cables with copper or aluminium conductors, 11-24kV-33kV, into high voltage switchgear and transformers.
ABB connectors terminate high voltage cables with copper wire and copper tape screens, with or without aluminium (AWA) or steel wire armour (SWA) inot switchgear and transformers.
The outdoor silicone-rubber insulation design includes a skirt configuration that offers exceptional creep, strike, weather and contamination resistance, along with superior cable sealing and voltage withstand. All termination kits come complete with the housing and stress tube pre-assembled on the core, ready for quick and easy installation.
“The Ranger2® Shrink-Fit Terminations enhance the breadth of our Elastimold® line of pre-molded cable accessory components,” said Mike Jackson, Product Manager for Thomas & Betts. “Their design provides the superior skirt configurations for riser pole, pad-mounted and other installations exposed to the elements.”
The single-piece terminations for 15kV and 25kV applications feature shrink-fit design for effortless installation. The two-piece termination for 35kV applications facilitates easier core removal: one needs only to position the terminator on the prepared cable and remove the center core. The terminations are compact and lightweight to enable installations in restricted spaces and free-hanging applications.
Elastimold® Ranger2® Shrink-Fit Terminations 15-35kV meet or exceed all requirements of IEEE Standard 48 for Class 1 outdoor or Class 2 indoor terminations.
Prysmian offers a comprehensive range of flexible cable solutions with Class 5 conductors for fixed installations. With Flexible XLPE and Fire Performance cables, Prysmian has a full suite of cables for the entire Construction market.
Presentation on the new EHF-100 amplifier, which is iPod compatible and gives you the sound of a 10k amplifier at a third of the price. Check out rogershighfidelity.com
T&D are distributors for ABB Kabeldon High Voltage Cable Joints, Cable Terminations and Screened Separable Connectors for high voltage XLPE cable terminating and jointing 11kV, 24kV and 33kV. ABB HV cable connectors are premolded screened separable connectors for terminating and connecting XLPE insulated single or three core cables with copper or aluminium conductors, 11-24kV-33kV, into high voltage switchgear and transformers.
ABB connectors terminate high voltage cables with copper wire and copper tape screens, with or without aluminium (AWA) or steel wire armour (SWA) inot switchgear and transformers.
The outdoor silicone-rubber insulation design includes a skirt configuration that offers exceptional creep, strike, weather and contamination resistance, along with superior cable sealing and voltage withstand. All termination kits come complete with the housing and stress tube pre-assembled on the core, ready for quick and easy installation.
“The Ranger2® Shrink-Fit Terminations enhance the breadth of our Elastimold® line of pre-molded cable accessory components,” said Mike Jackson, Product Manager for Thomas & Betts. “Their design provides the superior skirt configurations for riser pole, pad-mounted and other installations exposed to the elements.”
The single-piece terminations for 15kV and 25kV applications feature shrink-fit design for effortless installation. The two-piece termination for 35kV applications facilitates easier core removal: one needs only to position the terminator on the prepared cable and remove the center core. The terminations are compact and lightweight to enable installations in restricted spaces and free-hanging applications.
Elastimold® Ranger2® Shrink-Fit Terminations 15-35kV meet or exceed all requirements of IEEE Standard 48 for Class 1 outdoor or Class 2 indoor terminations.
Prysmian offers a comprehensive range of flexible cable solutions with Class 5 conductors for fixed installations. With Flexible XLPE and Fire Performance cables, Prysmian has a full suite of cables for the entire Construction market.
Yamuna Infra & Technology Pvt. Ltd. is an India based leading manufacturer and exporter of high-quality heat shrinkable power cable jointing kits, heat shrinkable power cable termination kits and power cable accessories upto 36kV. Established in 1996, we have been supplying many of the leading power and telecom industries all over the world. We manufacture and market our products under 'US-SEAL' brand/trademark, which itself speak about million acknowledgements for their performance. We are one of the leading companies focused on manufacturing high-quality heat shrinkable moulded components such as cable breakout boots, cable end sealing caps and other electric cable accessories.
For more information visit www.yamunainfra.com
Jmv lps ltd wish india very happy independence to all Citizen of IndiaMahesh Chandra Manav
We know Value on Independence and Great Contribution done by our Freedom Fightor. now our responsiblity to Maintain Harmony between all Cast and Class of People who lives in Society.
JMV LPS Ltd Make in India Company Offer Product Comes Under Electrical Safety and Qualify with NBC2016,RDSO,DRDO, CEA,SECI, Electrical Power T&D.Metro Rail Project ,Smart City,Project AMRUT, Electrical Vehicle Charger, High Energy Battery Storage System,IOT ,Railway and Road Tunnel Infra
Maintenance Free Earthing , Exothermic Weld , Copper Clad Steel Conductors, Lightning Protection as Per NFC17-102 and IEC 62305 .Surge Protection for Power ,Data and Communication .
Relong’s RC300E is commercial microwave and RF laminate
material designed with low dielectric constant and very low
loss characteristics. This ceramic-filled, woven fiberglass
reinforced PTFE composite material is use unique chemistry
formulation and processing to offer RF and Microwave
designers an advantage for improving electrical properties
and mechanical performances.RC300E provides a significant
improvement in performance stability over the current
product line and other traditional fluoropolymer-glass
laminates.
JMV LPS LTD Everything Subject to Electrical Equipment Installation and Human...Mahesh Chandra Manav
JMV LPS Ltd Offer Product's for Electrical Safety as per Indian and International Electrical Standard,
Maintenance Free Earthing ,Grid Earthing ,Lightning Protection as Per IEC 62305 and NFC 17-102, Exothermic Weld, Copper Clad Steel Conductors , Surge Protection for Power ,Data and Communication Equipment's,
Useful for Architect , Electrical Consultants, MEP Consultants, Electrical Contractors's EPC Project Companies, Building Infra Project ,Housing Project ,Railways Buildings, Airports,Hospital ,Large Campus. Smart City Project ,AMRUT Projects,ICT Projects,Street Light LED's
Weiber's Fiber Optic Equipment or Fiber Fusion Splicer are ideal equipment for research and general
applications in field of computer networking and networking industry.
Exhibition is one Efforts by all the Exhibitors to Showcase their Latest Product in Stall and also present their Talented Team Members to answers technical quires raise by Visitors.
This Occuson is very useful for all Industries who are Having Electrical and Automation with Smart Communications in their plants .They should visit for upgrade their Knowledge and know about changing in Industries.
Meeting Place of your Professional Friends who are busy all the time but in this exhibition they may available for you.
JOB Placement good place for Experience and New Talent.
JMV will promise to visitors to offer new Experience and Change of Face as per Industry you will be find in our Stall
IC Socket and interconnect technologies such as embedded wire on elastomer, spring pin, stamped pin, silver particle elastomer, diamond particle interconnect enable testing of IC devices
REDCATT TECH PAPER== Speaker Transducer Dome bondingHTCS LLC
The RedCatt Engineering and Manufacturing teams have put a lot of effort into the development of high performance bonding techniques, specifically for use in High Frequency (HF) transducers/speakers and research in the area of HF dome design and manufacturing. The technical paper covers: Dome Forming, In-Process Dome Quality Control, Dome Treatment and Coating Process, Adhesives, UV Curing, SPL Improvement, Power Handling, and the Result Evaluation.
REDCATT ANNOUNCES NEW COMPRESSION DRIVER 140FCDHTCS LLC
The REDCATT 140FCD design has been optimized to provide high SPL output with very low distortion artifacts. At the core is its polyamide composite dome, formed as single piece with the surround. Surround has FEM optimized resonance control features. The voice coil former is carefully bonded to the dome with the very best available adhesives. The strong and reliable joint between the voice coil former and the dome ensures the energy is well transferred from the moving voice coil onto the dome and it also guaranties the longevity of the compression driver.
Description:
The 6NPM is a very high efficiency, (101.8 dB 1watt / 1 meter) 6-inch midrange speaker with incredibly linear frequency response characteristics and ultra low harmonic distortion artifacts. The 6NPM has extremely high sound quality. The 6NPM uses a lightweight paper pulp, specifically developed for this application. This unique cone provides the ideal weight to strength ratio.
At the core of the 6NPM is it’s voice coil technology featuring edge wounded aluminum ribbon wire. Unique lightweight and very short former provides the ideal transfer of power between the voice coil and the cone assembly and assists in reducing the distortion artifacts. By combining this material with the state of the art adhesives, the 6FPM delivers incredible performance. The magnetic circuit design is optimized to generate the minimum amount of flux modulation, providing exceptional stability. The neodymium magnet is in a direct contact with the CNC exposed aluminum section of the basket, hold in place by our thermal transfer adhesives. This design dramatically improves the heat transfer. The 6NPM is ideal for use in both sealed and vented enclosure designs. The most suitable applications are in high quality professional audio, as line array systems, 3-way designs, where extreme SPL outputs are desired. The 6NPM can be horn loaded or used in directly radiated midrange applications.
Yamuna Infra & Technology Pvt. Ltd. is an India based leading manufacturer and exporter of high-quality heat shrinkable power cable jointing kits, heat shrinkable power cable termination kits and power cable accessories upto 36kV. Established in 1996, we have been supplying many of the leading power and telecom industries all over the world. We manufacture and market our products under 'US-SEAL' brand/trademark, which itself speak about million acknowledgements for their performance. We are one of the leading companies focused on manufacturing high-quality heat shrinkable moulded components such as cable breakout boots, cable end sealing caps and other electric cable accessories.
For more information visit www.yamunainfra.com
Jmv lps ltd wish india very happy independence to all Citizen of IndiaMahesh Chandra Manav
We know Value on Independence and Great Contribution done by our Freedom Fightor. now our responsiblity to Maintain Harmony between all Cast and Class of People who lives in Society.
JMV LPS Ltd Make in India Company Offer Product Comes Under Electrical Safety and Qualify with NBC2016,RDSO,DRDO, CEA,SECI, Electrical Power T&D.Metro Rail Project ,Smart City,Project AMRUT, Electrical Vehicle Charger, High Energy Battery Storage System,IOT ,Railway and Road Tunnel Infra
Maintenance Free Earthing , Exothermic Weld , Copper Clad Steel Conductors, Lightning Protection as Per NFC17-102 and IEC 62305 .Surge Protection for Power ,Data and Communication .
Relong’s RC300E is commercial microwave and RF laminate
material designed with low dielectric constant and very low
loss characteristics. This ceramic-filled, woven fiberglass
reinforced PTFE composite material is use unique chemistry
formulation and processing to offer RF and Microwave
designers an advantage for improving electrical properties
and mechanical performances.RC300E provides a significant
improvement in performance stability over the current
product line and other traditional fluoropolymer-glass
laminates.
JMV LPS LTD Everything Subject to Electrical Equipment Installation and Human...Mahesh Chandra Manav
JMV LPS Ltd Offer Product's for Electrical Safety as per Indian and International Electrical Standard,
Maintenance Free Earthing ,Grid Earthing ,Lightning Protection as Per IEC 62305 and NFC 17-102, Exothermic Weld, Copper Clad Steel Conductors , Surge Protection for Power ,Data and Communication Equipment's,
Useful for Architect , Electrical Consultants, MEP Consultants, Electrical Contractors's EPC Project Companies, Building Infra Project ,Housing Project ,Railways Buildings, Airports,Hospital ,Large Campus. Smart City Project ,AMRUT Projects,ICT Projects,Street Light LED's
Weiber's Fiber Optic Equipment or Fiber Fusion Splicer are ideal equipment for research and general
applications in field of computer networking and networking industry.
Exhibition is one Efforts by all the Exhibitors to Showcase their Latest Product in Stall and also present their Talented Team Members to answers technical quires raise by Visitors.
This Occuson is very useful for all Industries who are Having Electrical and Automation with Smart Communications in their plants .They should visit for upgrade their Knowledge and know about changing in Industries.
Meeting Place of your Professional Friends who are busy all the time but in this exhibition they may available for you.
JOB Placement good place for Experience and New Talent.
JMV will promise to visitors to offer new Experience and Change of Face as per Industry you will be find in our Stall
IC Socket and interconnect technologies such as embedded wire on elastomer, spring pin, stamped pin, silver particle elastomer, diamond particle interconnect enable testing of IC devices
REDCATT TECH PAPER== Speaker Transducer Dome bondingHTCS LLC
The RedCatt Engineering and Manufacturing teams have put a lot of effort into the development of high performance bonding techniques, specifically for use in High Frequency (HF) transducers/speakers and research in the area of HF dome design and manufacturing. The technical paper covers: Dome Forming, In-Process Dome Quality Control, Dome Treatment and Coating Process, Adhesives, UV Curing, SPL Improvement, Power Handling, and the Result Evaluation.
REDCATT ANNOUNCES NEW COMPRESSION DRIVER 140FCDHTCS LLC
The REDCATT 140FCD design has been optimized to provide high SPL output with very low distortion artifacts. At the core is its polyamide composite dome, formed as single piece with the surround. Surround has FEM optimized resonance control features. The voice coil former is carefully bonded to the dome with the very best available adhesives. The strong and reliable joint between the voice coil former and the dome ensures the energy is well transferred from the moving voice coil onto the dome and it also guaranties the longevity of the compression driver.
Description:
The 6NPM is a very high efficiency, (101.8 dB 1watt / 1 meter) 6-inch midrange speaker with incredibly linear frequency response characteristics and ultra low harmonic distortion artifacts. The 6NPM has extremely high sound quality. The 6NPM uses a lightweight paper pulp, specifically developed for this application. This unique cone provides the ideal weight to strength ratio.
At the core of the 6NPM is it’s voice coil technology featuring edge wounded aluminum ribbon wire. Unique lightweight and very short former provides the ideal transfer of power between the voice coil and the cone assembly and assists in reducing the distortion artifacts. By combining this material with the state of the art adhesives, the 6FPM delivers incredible performance. The magnetic circuit design is optimized to generate the minimum amount of flux modulation, providing exceptional stability. The neodymium magnet is in a direct contact with the CNC exposed aluminum section of the basket, hold in place by our thermal transfer adhesives. This design dramatically improves the heat transfer. The 6NPM is ideal for use in both sealed and vented enclosure designs. The most suitable applications are in high quality professional audio, as line array systems, 3-way designs, where extreme SPL outputs are desired. The 6NPM can be horn loaded or used in directly radiated midrange applications.
Amigos les comparto información para realizar bafles. Mi carrera es muy versátil y no he probado varios de los aquí publicados. Pero si a alguien le llegara a realizar. Por favor envíeme su información de cual fue el resultado. Saludos
Lobel solar power system supply all the regarding accessories of solar DCDB, solar ACDB, Array junction box, solar mouting structure, solar accessories, solar component, solar equipment, solar cable, solar dc fuse, dc fuse holder, ac spd, dc spd, mccb, connector, mc4, y type mc4, mcb etc...
Started to create milestones, we, M/s Jayani Technologies LLP marked our presence in the year 2009 and operate in the manufacturing/servicing of Optical Fiber Networking Product and services. since 4 years. Our quality services products have been always appreciated by our clients. Our spontaneous attitude and confident approach in offering an excellent range of Cable Blowing Machine, Common Fiber Patch Cords, Fiber Optic Pigtails, MPO MTP Fiber Patch Cables, Adopter or Coulper, Optical Attenuators, Optical Splitter, Ethernet Media Converters, Optical Video Converter has deepened our roots in the market. We, Ms Jayani Technologies LLP breathe with the aim of fully satisfying our clients with our high-quality products services. We are a unit of highly experienced professionals, all of them contributing at the best of their potentials to offer the highest degree of efficiency and client satisfaction.
6th International Conference on Machine Learning & Applications (CMLA 2024)ClaraZara1
6th International Conference on Machine Learning & Applications (CMLA 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of on Machine Learning & Applications.
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
NUMERICAL SIMULATIONS OF HEAT AND MASS TRANSFER IN CONDENSING HEAT EXCHANGERS...ssuser7dcef0
Power plants release a large amount of water vapor into the
atmosphere through the stack. The flue gas can be a potential
source for obtaining much needed cooling water for a power
plant. If a power plant could recover and reuse a portion of this
moisture, it could reduce its total cooling water intake
requirement. One of the most practical way to recover water
from flue gas is to use a condensing heat exchanger. The power
plant could also recover latent heat due to condensation as well
as sensible heat due to lowering the flue gas exit temperature.
Additionally, harmful acids released from the stack can be
reduced in a condensing heat exchanger by acid condensation. reduced in a condensing heat exchanger by acid condensation.
Condensation of vapors in flue gas is a complicated
phenomenon since heat and mass transfer of water vapor and
various acids simultaneously occur in the presence of noncondensable
gases such as nitrogen and oxygen. Design of a
condenser depends on the knowledge and understanding of the
heat and mass transfer processes. A computer program for
numerical simulations of water (H2O) and sulfuric acid (H2SO4)
condensation in a flue gas condensing heat exchanger was
developed using MATLAB. Governing equations based on
mass and energy balances for the system were derived to
predict variables such as flue gas exit temperature, cooling
water outlet temperature, mole fraction and condensation rates
of water and sulfuric acid vapors. The equations were solved
using an iterative solution technique with calculations of heat
and mass transfer coefficients and physical properties.
CW RADAR, FMCW RADAR, FMCW ALTIMETER, AND THEIR PARAMETERSveerababupersonal22
It consists of cw radar and fmcw radar ,range measurement,if amplifier and fmcw altimeterThe CW radar operates using continuous wave transmission, while the FMCW radar employs frequency-modulated continuous wave technology. Range measurement is a crucial aspect of radar systems, providing information about the distance to a target. The IF amplifier plays a key role in signal processing, amplifying intermediate frequency signals for further analysis. The FMCW altimeter utilizes frequency-modulated continuous wave technology to accurately measure altitude above a reference point.
4. Design:
Redcatt engineers have developed REDCATT branded transduc-
ers utilizing either neodymium or ferrite based magnetic circuits,
capable of delivering the highest level of performance, providing
a consistent, high integrity magnetic flux gaps, ultra low distor-
tion characteristics and high efficiency cooling designs.
The magnetic circuit designs are optimized to generate
the minimum amount of flux modulation, providing exceptional
stability.
REDCATT engineers use many modern Finite Element
Analysis and Modeling software tools to optimize the design. The
combination of computer aided technologies and years of design
experience in the field of audio products ensures our designs are
achieving and exceeding the set goals.
We have implement the latest 3D printing equipment
technologies to speed up our development time and shorten the
sample delivery times to our customers. In many cases we are
able to validate the fresh designs within hours after they have
been modeled in our computers.
Components:
REDCATT transducers always aim to use the best
available components, and the best available technology to
manufacture them. The level of precision, consistency and overall
quality achieved on all our components guaranties the highest
performance of our transducers. Our latest investments into the
state of the art CNC machining technologies is helping us to
achieve our quality goals without compromises.
VOICE COILS
Our in house wounded voice coils using inside/outside winding,
aluminum or copper ribbon wires. The extensive usage of Poly-
imide former materials, specialty winding adhesives and high
temperature wires allow us to push the power handling of the
transducers to the new heights while the voice coils are capable to
handle temperatures exceeding 350°C, beyond thermal require-
ment of modern audio systems. We pay great attention to all
related and necessary reliability testings of our voice coils.
SPIDERS
In many our woofer designs, REDCATT double or triple silicone
sealed spiders functioning as an air pump expelling the hot air
and drawing-in cool air every time the cone assembly moves.
Combined spider air-pump with highly efficient air flow magnet-
ic structure designs greatly reduces power compression.
CONES
The cones one and the dust cap are mostly made using an
advanced REDCATT pulps with carbon or glass fiber reinforce-
ment. The cones are also extensively treated to withstand harsh
environments and high humidity.
Metal parts in the speaker assembly are coated for extreme
weatherization protection.
Magnetic structure designs
Our engineers utilized the use of modern FEM software to
design, analyze and improve the magnetic circuits. Our designs
sport highly efficient based magnetic circuits capable of deliver-
ing the highest level of performance, providing a consistent, high
integrity magnetic flux gaps, ultra low distortion characteristic
and high efficiency cooling systems. The magnetic circuit designs
are optimized to generate the minimum amount of flux modula-
tion, providing exceptional stability.
5. ADHESIVES
REDCATT uses the state of the art adhesives in all assembly
steps. REDCATT unique, precise adhesives dispensing and
curing, combined with six-sigma quality monitoring and extra
care in storing and handling all adhesives, further improves the
product consistency and reliability. We pay lot of attention to the
details when it comes to adhesives. Our development and manu-
facturing processes were designed to fully support our vision for
how the modern transducers should be built.
Reliability testing
It is our mission to design and produce transducers
that are not only the best performing and consistent drivers
around, but we also pay great attention to the reliability testing
and longevity of our transducers. Our reliability testing lab is well
equipped to take the tested transducer to the limits in a con-
trolled and repeatable way. We can set the weather environment
from -40 to 150 °C with added humidity up to 99% RH. UV-A
and UV-B tests are also part of our reliability test cycles to accel-
erate the aging of the parts.
Implemented Klippel power testing equipment ensures
the driver is tested using the standardized AES power test proce-
dures, while all important parameters are monitored trough the
test cycle.
6. 21NPW
General Specifications
Nominal Diameter:
Rated Impedance:
Power Handling:
AES Power:
Power Compression @-10dB
Power Compression @-10dB
Power Compression @Max Power
Maximum Recommended Xover Freq.:
Recommended Enclosure Volume:
Cone Design:
Fs
Re
Sd
Qms
Qes
Qts
Vas
Mms
BL product (force factor)
Peak to Peak Displacement (mm)
Le (mH @1kHz)
Overall diameter
No. Of mounting holes
Bolt circle diameter
Front mount baffle cutout dia.
Rear mount baffle cutout diameter
Total depth
Flange and gasket thickness
Net weight
Shipping weight
Packing Dimensions
533mm (21in.)
4 Ohm
1800 Watts
0.7dB
1.5dB
2.2dB
150Hz
150- 500 Liters 4-18cuft.
Strght Gmtry, Redcatt Cell.
34 Hz
3 Ohm
1665 cm2
(258 in.2
)
12
0.32
0.31
168 Liters
480 g
32
26
1.1
546 mm ( 21.49 in.)
8
520 mm (20.47 in.)
498 mm (19.60 in.)nominal
510 mm (20.08 in.)nominal
260 mm (10.23 in.)
22 mm ( 0.86 in.)
13.4 kg (29.5 lbs.)
15.6 kg (34.3 lbs.)
575x575x295mm
Cont. Power | Sens. | Fs | Freq. Range | VC Dia. | VC Wire | Cone/Surround/Dome | Magnet type |
Frequency Response
Frequency response measurement with transducer
mounted in 200 liter enclosure tuned to 35 Hz.
Impedance Response
Impedance measured in free air
Level
Ohm
Frequency (Hz)
160
120
80
40
0
20 40 100 200 500 1k 2k 5k 10k 20k
Level
SPL
Frequency (Hz)
110
100
90
80
70
20 50 100 200 500 1k 2k 5k 10k 20k
546
520
8-M8 screws
260
179
5
170
496
Ordering code: 21NPW-018
APPLICATION:
• Ideal for high output, high power subwoofers, with band pass or port
loaded enclosure designs.
The 21NPW is a high efficiency, (97 dB 1watt / 1
meter) 21-inch woofer with incredibly linear frequency response
characteristics, extreme high power handling capability while
generating low harmonic distortion artifacts. The 21NPW uses a
lightweight carbon fiber loaded cone assembly along with a high
excursion triple roll constant geometry surround. This combina-
tion provides remarkable strength, high efficiency and a peak to
peak maximum excursion of 50mm (2in).
Power Handling
At the core of the 21NPW is it’s voice coil technology featuring
a composite Polyimide former material capable of withstanding
peak temperatures in excess of 350C, well beyond the thermal
requirements of modern professional audio systems. The 21NPW
delivers incredible performance.
REDCATT has implemented a triple layer/silicone spider design
to ensure long term Fs memory, consistency and diminish anom-
alies associated with spider deterioration.
Neodymium Low Frequency Woofer
3600 watts 97 dB 34 Hz 25 Hz - 1.5 kHz 5.3” 1in/3out Copper Paper w. CF / Fabric Neodymium
7. 468
442
M6 screw
232
170
147
426
General Specifications
Nominal Diameter:
Rated Impedance:
Power Handling:
AES Power:
Power Compression @-10dB
Power Compression @-10dB
Power Compression @Max Power
Maximum Recommended Xover Freq.:
Recommended Enclosure Volume:
Cone Design:
Fs
Re
Sd
Qms
Qes
Qts
Vas
Mms
BL product (force factor)
Peak to Peak displacement (mm)
Le (mH @1kHz)
Overall diameter
No. Of mounting holes
Bolt circle diameter
Front mount baffle cutout dia.
Rear mount baffle cutout diameter
Total depth
Flange and gasket thickness
Net weight
Shipping weight
Packing Dimensions
460 mm (18 in.)
4 Ohm
1500 Watts
0.7dB
1.5dB
2.2dB
1,000Hz
150 - 350 Liters 4 - 12 cuft.
Strght Gmtry, Redcatt Cell.
30 Hz
3.23 Ohm
1257 cm2
(195 in.2
)
8.14
0.22
0.21
173 Liters
350 g
31.5 Tm
36 mm
1.84
467.9 mm ( 18.42 in.)
8
442 mm (17.4 in.)
428mm (16.85 in.)Nominal
430 mm ( 16.92 in.)Nominal
230 mm (9.1 in.)
22 mm ( 0.86 in.)
13.8 kg (30.4 lbs.)
16.1 kg (35.5 lbs.)
52x 52x 27 cm
Cont. Power | Sens. | Fs | Freq. Range | VC Dia. | VC Wire | Cone/Surround/Dome | Magnet type
Frequency Response
Impedance Response
Impedance measured free air
The 181NPW is a high efficiency, (97 dB 1watt / 1 me-
ter) 18-inch woofer with incredibly linear frequency response
characteristics, extreme high power handling capability while
generating low harmonic distortion artifacts. The 181NPW uses
a lightweight carbon fiber loaded cone assembly along with a
high excursion triple roll constant geometry surround. This
combination provides remarkable strength, high efficiency and
a peak to peak maximum excursion of 50mm (2in).
Power Handling
At the core of the 181NPW is it’s voice coil technology featuring
a composite Polyimide former material capable of withstanding
peak temperatures in excess of 350C, well beyond the ther-
mal requirements of modern professional audio systems. The
181NPW delivers incredible performance.
REDCATT has implemented a triple layer/silicone spider
design to ensure long term shape memory, consistency and
diminish anomalies associated with spider deterioration.
Level
Ohm
Frequency (Hz)
80
20
0
20 20 50 100 200 500 1k 2k
40
60
100
120
140
160
Frequency response measurement with transducer
mounted in a 140 liter vented enclosure tuned to 35Hz
Level
SPL
Frequency (Hz)
120
100
60
40
80
20 50 100 200 500 1k 2k 5k 10k 20k
20
3000 watts 97 dB 30 Hz 25 Hz - 1.5 kHz 5.3” 1in/3out Copper Paper w. CF/ Fabric Neodymium
181NPW
APPLICATION:
• Ideal for high output, high power subwoofers, with band pass or port
loaded enclosure designs.
Ordering code: 181NPW-099 Neodymium Low Frequency Woofer
8. 18NPW
General Specifications
Nominal Diameter:
Rated Impedance:
Power Handling:
AES Power:
Power Compression @-10dB
Power Compression @-10dB
Power Compression @Max Power
Maximum Recommended Xover Freq.:
Recommended Enclosure Volume:
Cone Design:
Fs
Re
Sd
Qms
Qes
Qts
Vas
Mms
BL product (force factor)
Peak to Peak Displacement (mm)
Le (mH @1kHz)
Overall diameter
No. Of mounting holes
Bolt circle diameter
Front mount baffle cutout dia.
Rear mount baffle cutout diameter
Total depth
Flange and gasket thickness
Net weight
Shipping weight
Packing Dimensions
460 mm (18 in.)
8 ohm
1200 Watts
0.7dB
1.5dB
2.2dB
1,000 Hz
150 - 350 Liters 4 - 12 cuft.
Strght Gmtry, Redcatt Cell.
36 Hz
5.35 Ohm
1256 cm2
(194 in.2
)
9.5
0.34
0.33
212 Liters
199 g
27.73
24 mm
1.6
467.9 mm ( 18.42 in.)
8
442 mm (17.40 in.)
428 mm (16.85 in.)nominal
430 mm ( 16.92 in.)nominal
214 mm (8.42 in.)
22 mm ( 0.86 in.)
9.1 kg (20.1 lbs.)
10.2 kg (22.5 lbs.)
485x 485x 260 mm
Cont. Power | Sens. | Fs | Freq. Range | VC Dia. | VC Wire | Cone/Surround/Dome | Magnet type |
Frequency Response
Impedance Response
Level
Ohm
Frequency (Hz)
160
120
80
40
0
20 40 100 200 500 1k 2k 5k 10k 20k
Level
SPL
Frequency (Hz)
110
100
90
80
70
20 50 100 200 500 1k 2k 5k 10k 20k
Ordering code: 18NPW-017
APPLICATION:
• Ideal for high output, high power subwoofers, with band pass or port
loaded enclosure designs.
The 18NPW is a high efficiency, (98 dB 1watt / 1 meter) 18-
inch woofer with incredibly linear frequency response characteristics,
extreme high power handling capability while generating low harmonic
distortion artifacts. The 18NPW uses a lightweight, but strong, carbon fi-
ber loaded cone assembly along with a high excursion triple roll constant
geometry surround. This combination provides remarkable strength, high
efficiency and a peak to peak maximum excursion of 50mm (2in).
Power Handling
At the core of the 18NPW is it’s voice coil technology featuring a compos-
ite Polyimide former material capable of withstanding peak temperatures
in excess of 350°C, well beyond the thermal requirements of modern
professional audio systems. The 18NPW delivers incredible performance.
REDCATT has implemented a double layer/silicone spider design to
ensure long term Fs memory, consistency and diminish anomalies asso-
ciated with spider deterioration. The sealed spider works as a air pump
and pushes the air trough out motor to increase heat transfer and cooling
of the parts.
Neodymium Low Frequency Woofer
2400 watts 98 dB 36 Hz 25 Hz - 1.5 kHz 4” 1in/1out Copper Paper w. CF / Fabric Neodymium
9. General Specifications
Nominal Diameter:
Rated Impedance:
Power Handling:
AES Power:
Power Compression @-10dB
Power Compression @-10dB
Power Compression @Max Power
Maximum Recommended Xover Freq.:
Recommended Enclosure Volume:
Cone Design:
Fs
Re
Sd
Qms
Qes
Qts
Vas
Mms
BL product (force factor)
Peak to peak displacement (mm)
Le (mH @1kHz)
Overall diameter
No. Of mounting holes
Bolt circle diameter
Front mount baffle cutout dia.
Rear mount baffle cutout diameter
Total depth
Flange and gasket thickness
Net weight
Shipping weight
Packing Dimensions
460 mm (18 in.)
8 Ohm
1000 Watts
0.7dB
1.5dB
2.2dB
500Hz
150 - 350 Liters
Strght Gmtry, Redcatt Cell.
34 Hz
5.17 Ohm
1257 cm2
(195 in.2
)
8.9
0.45
0.43
235 Liters
203 g
22.5 Tm
25 mm
1.6
467.9 mm ( 18.42 in.)
8
442 mm (17.4 in.)
428mm (16.85 in.)nominal
430 mm ( 16.92 in.)nominal
204 mm (8.03 in.)
22 mm ( 0.86 in.)
13.3 kg (29.36 lbs.)
14.9 kg (32.8 lbs.)
485x 485x 260 mm
Cont. Power | Sens. | Fs | Freq. Range | VC Dia. | VC Wire | Cone/Surround/Dome | Magnet type
Frequency Response
Impedance Response
Frequency response measurement with transducer mount-
ed in a 180 liter vented enclosure tuned to 35Hz
Level
Ohm
Frequency (Hz)
160
120
80
40
0
20 40 100 200 500 1k 2k 5k 10k 20k
Level
SPL
Frequency (Hz)
110
100
90
80
70
20 50 100 200 500 1k 2k 5k 10k 20k
The 18FIND is a high efficiency, (98 dB 1watt /
1 meter) 18-inch woofer with incredibly linear frequency
response characteristics, high power handling capability while
generating low harmonic distortion artifacts. The 18FIND uses
a lightweight glass fiber loaded cone assembly along with a high
excursion triple roll constant geometry surround. This combi-
nation provides remarkable strength, high efficiency and a peak
to peak maximum excursion of 50mm (2in).
Power Handling
At the core of the 18FIND is it’s voice coil technology featuring
a composite Polyimide former material capable of withstanding
peak temperatures in excess of 250C, well beyond the thermal
requirements of modern professional audio systems.
REDCATT has implemented a silicone spider design to ensure
long term shape memory, consistency and diminish anomalies
associated with spider deterioration.
2000 watts 98 dB 34 Hz 30 Hz - 2.5 kHz 4” 1in/1out Copper Paper w. GF/ Fabric Ferrite
18FIND
APPLICATION:
• Ideal for high power subwoofers, with band pass or port loaded
enclosure designs.
Ordering code: 18FIND-036 Ferrite Low Frequency Woofer
10. 15FIND
General Specifications
Nominal Diameter:
Rated Impedance:
Power Handling:
AES Power:
Power Compression @-10dB
Power Compression @-10dB
Power Compression @Max Power
Maximum Recommended Xover Freq.:
Recommended Enclosure Volume:
Cone Design:
Fs
Re
Sd
Qms
Qes
Qts
Vas
Mms
BL product (force factor)
Peak to peak displacement (mm)
Le (mH @1kHz)
Overall diameter
No. of mounting holes
Bolt circle diameter
Front mount baffle cutout dia.
Rear mount baffle cutout diameter
Total depth
Flange and gasket thickness
Net weight
Shipping weight
Packing Dimensions
381 mm (15 in.)
8 ohm
1000 Watts
0.7dB
1.5dB
2.2dB
1,500 Hz
70 - 180 Liters 2 - 6 cuft.
Strght Gmtry, Redcatt Cell.
42 Hz
5.71 Ohm
881 cm2
(137 in.2
)
8.3
0.468
0.443
103 Liters
160 g
22.5
22
2.15
392 mm ( 15.43 in.)
8
372 mm (14.64 in.)
362 mm (14.25 in.)nominal
360 mm ( 14.17 in.)nominal
159.5 mm (6.28 in.)
12 mm ( 0.47 in.)
12.4 kg (27.3 lbs.)
13.9 kg (30.6 lbs.)
410x 410x 215 mm
Cont. Power | Sens. | Fs | Freq. Range | VC Dia. | VC Wire | Cone/Surround/Dome | Magnet type |
Ordering code: 15FIND-035
APPLICATION:
• The 15FIND is ideal for use in vented port or band pass applications
where sizable amounts of low frequency acoustic power is desired.
The 15FIND is a high efficiency, (98 dB 1watt / 1 meter)
15-inch woofer with incredibly linear frequency response characteristics,
extreme high power handling capability while generating low harmonic
distortion artifacts. The 15FIND uses a lightweight, but strong, glass fiber
loaded cone assembly along with a high excursion triple roll constant
geometry surround. This combination provides remarkable strength, high
efficiency and a peak to peak maximum excursion of 38mm (1.5in).
Power Handling
At the core of the 15FIND is it’s voice coil technology featuring a compos-
ite Polyimide former material capable of withstanding peak temperatures
in excess of 250°C, well beyond the thermal requirements of modern
professional audio systems. Winding if winded on the outside and inside
of the former.
REDCATT has implemented a silicone spider design to ensure long term
Fs memory, consistency and diminish anomalies associated with spider
deterioration. The sealed spider works as a air pump and pushes the air
trough out motor to increase heat transfer and cooling of the parts.
Ferrite Low Frequency Woofer
2000 watts 98 dB 42 Hz 28 Hz - 2.5 kHz 4” 1in/1out Copper Paper w. CF / Fabric Ferrite
Frequency Response
Impedance Response
Frequency response measurement with transducer mount-
ed in a 180 liter vented enclosure tuned to 35Hz
Level
Ohm
Frequency (Hz)
160
120
80
40
0
20 40 100 200 500 1k 2k 5k 10k 20k
Level
SPL
Frequency (Hz)
110
100
90
80
70
20 50 100 200 500 1k 2k 5k 10k 20k
11. General Specifications
Nominal Diameter:
Rated Impedance:
Power Handling:
AES Power:
Power Compression @-10dB
Power Compression @-10dB
Power Compression @Max Power
Maximum Recommended Xover Freq.:
Recommended Enclosure Volume:
Cone Design:
Fs
Re
Sd
Qms
Qes
Qts
Vas
Mms
BL product (force factor)
Peak to peak displacement (mm)
Le (mH @1kHz)
Overall diameter
No. of mounting holes
Bolt circle diameter
Front mount baffle cutout dia.
Rear mount baffle cutout diameter
Total depth
Flange and gasket thickness
Net weight
Shipping weight
Packing Dimensions
373
392
7.4
107
149
360
200
137
2.90
381 mm (15 in.)
8 ohm
800 Watts
0.8dB
1.6dB
2.5dB
2,000 Hz
70 - 180 Liters 2 - 6 cuft.
Exp. Gmtry, Redcatt Cell.
45 Hz
4.63 Ohm
829.6 cm2
(128.6 in.2
)
5.99
0.35
0.33
113 Liters
95 g
18 Tm
25mm
1.0
392 mm ( 15.43 in.)
8
372 mm (14.64 in.)
362 mm (14.25 in.)Nominal
360 mm (14.17 in.)Nominal
149 mm (5.87 in.)
12 mm ( 0.47 in.)
12.4 kg (27.33 lbs.)
13.9 kg (30.6 lbs.)
410x410x215mm
Cont. Power | Sens. | Fs | Freq. Range | VC Dia. | VC Wire | Cone/Surround/Dome | Magnet type
Level
Ohm
Frequency (Hz)
80
20
0
2 5 20 50 100 500 1k 2k
40
60
100
120
140
10 200 5k 10k 20k
Level
SPL
Frequency (Hz)
100
60
40
80
20 50 100 200 2k
20
90
70
50
30
10
500 1k 5k 10k
Frequency response measurement with transducer
mounted in a 180 liter vented enclosure tuned to 45Hz
Frequency Response
Impedance Response
The 152FIND is a high efficiency, (99.5 dB 1watt
/ 1 meter) 15-inch woofer with incredibly linear frequency
response characteristics, high power handling capability while
generating low harmonic distortion artifacts. The 152FIND
uses a lightweight carbon fiber loaded cone assembly along with
a high excursion triple roll constant geometry surround. This
combination provides remarkable strength, high efficiency and
a peak to peak maximum excursion of 14mm (0.55in).
Power Handling
At the core of the 152FIND is it’s voice coil technology featuring
a composite Polyimide former material capable of withstanding
peak temperatures in excess of 280C, well beyond the thermal
requirements of modern professional audio systems.
The 152FIND cone and dust cap are made using an
advanced carbon fiber loaded REDCATT pulp. The woofer
cone is also extensively treated to withstand harsh environ-
ments and high humidity. Metal parts in the speaker assembly
are coated for extreme weatherization protection.
1600 watts 99.5 dB 45 Hz 35 Hz - 2,200 Hz 3” 1in/1out CCAW Paper w. CF/ Fabric Ferrite
152FIND
APPLICATION:
• Ideal for ported or band pass subwoofer designs, design with
extended mid frequency for 2-way and multi-way systems
Ordering code: 152FIND-115 Ferrite Mid-Woofer
12. 15FPM
General Specifications
Nominal Diameter:
Rated Impedance:
Power Handling:
AES Power:
Power Compression @-10dB
Power Compression @-10dB
Power Compression @Max Power
Maximum Recommended Xover Freq.:
Recommended Enclosure Volume:
Cone Design:
Fs
Re
Sd
Qms
Qes
Qts
Vas
Mms
BL product (force factor)
Peak to peak displacement (mm)
Le (mH @1kHz)
Overall diameter
No. of mounting holes
Bolt circle diameter
Front mount baffle cutout dia.
Rear mount baffle cutout diameter
Total depth
Flange and gasket thickness
Net weight
Shipping weight
Packing Dimensions
381 mm (15 in.)
8 ohm
1000 Watts
0.7dB
1.5dB
2.2dB
2,000 Hz
70 - 180 Liters 2 - 6 cuft.
Prog. Gmtry, Redcatt Cell.
40 Hz
5.5 Ohm
881 cm2
(137 in.2
)
10
0.367
0.354
138 Liters
124 g
21.5
20
1.45
392 mm ( 15.43 in.)
8
372 mm (14.64 in.)
362 mm (14.25 in.)Nominal
360 mm (14.17 in.)Nominal
159.5 mm (6.28 in.)
12 mm ( 0.47 in.)
12.4 kg (27.3 lbs.)
13.9 kg (30.6 lbs.)
450x 450x 200 mm
Cont. Power | Sens. | Fs | Freq. Range | VC Dia. | VC Wire | Cone/Surround/Dome | Magnet type |
Ordering code: 15FPM-063
APPLICATION:
• The 15FPM is ideal for use in vented port or band pass applications.
Its design with extended mid frequency is ideal for 2-way and multi-way
speaker systems
The 15FPM is a high efficiency, (98 dB 1watt / 1 meter) 15-
inch woofer with incredibly linear frequency response characteristics. The
15FPM uses a lightweight, but strong, carbon fiber loaded cone assembly
along with a high excursion triple roll constant geometry surround. Cone
material was specifically developed with 2-way or multi-way application
in mind. The 15FPM has expended mid frequency range, providing
possibility for cross overs at higher frequencies.
Power Handling
At the core of the 15FPM is it’s voice coil technology featuring a compos-
ite Polyimide former material capable of withstanding peak temperatures
in excess of 250°C, well beyond the thermal requirements of modern
professional audio systems. The coil is wound on the outside of the for-
mer. Winding material is aluminum ribbon, material that provides ideal
transient response.
REDCATT has implemented a silicone spider design to ensure long term
Fs memory, consistency and diminish anomalies associated with spider
deterioration. The sealed spider works as a air pump and pushes the air
trough out motor to increase heat transfer and cooling of the parts.
Ferrite Mid-bass Woofer
2,000 watts 98 dB 40 Hz 28 Hz - 2.5 kHz 4” 1out Alu Ribbon Paper w. CF / Fabric Ferrite
Frequency Response
Level
SPL
Frequency (Hz)
110
100
90
80
70
20 50 100 200 500 1k 2k 5k 10k 20k
Impedance Response
Level
Ohm
Frequency (Hz)
160
120
80
40
0
20 40 100 200 500 1k 2k 5k 10k 20k
Frequency response measurement with transducer mounted in
180 liter vented enclosure tuned to 35 Hz.
13. General Specifications
Nominal Diameter:
Rated Impedance:
Power Handling:
AES Power:
Power Compression @-10dB
Power Compression @-10dB
Power Compression @Max Power
Maximum Recommended Xover Freq.:
Recommended Enclosure Volume:
Cone Design:
Fs
Re
Sd
Qms
Qes
Qts
Vas
Mms
BL product (force factor)
Peak to peak displacement (mm)
Le (mH @1kHz)
Overall diameter
No. of mounting holes
Bolt circle diameter
Front mount baffle cutout dia.
Rear mount baffle cutout diameter
Total depth
Flange and gasket thickness
Net weight
Shipping weight
Packing Dimensions
381 mm (15 in.)
8 ohm
1200 Watts
0.8dB
1.6dB
2.5dB
2,000 Hz
70 - 180 Liters 2 - 6 cuft.
Strght Gmtry, Redcatt Cell.
42 Hz
5.71 Ohm
881 cm2
(137 in.2
)
9.4
0.32
0.31
99 Liters
154 g
27 Tm
20 mm
1.65
392 mm ( 15.43 in.)
8
372 mm (14.64 in.)
362 mm (14.25 in.)Nominal
360 mm (14.17 in.)Nominal
167.5 mm (6.59 in.)
12 mm ( 0.47 in.)
8.1 kg (17.8 lbs.)
8.7 kg (19.1 lbs.)
450x450x200mm
Cont. Power | Sens. | Fs | Freq. Range | VC Dia. | VC Wire | Cone/Surround/Dome | Magnet type
Frequency response measurement with transducer
mounted in a 180 liter vented enclosure tuned to 35Hz
Frequency Response
Level
SPL
Frequency (Hz)
110
100
90
80
70
20 50 100 200 500 1k 2k 5k 10k 20k
Impedance Response
Level
Ohm
Frequency (Hz)
160
120
80
40
0
20 40 100 200 500 1k 2k 5k 10k 20k
The 15NPW is a high efficiency, (97 dB 1watt / 1
meter) 15-inch woofer with linear frequency response charac-
teristics, high power handling capability while generating low
harmonic distortion artifacts. The 15NPW uses a lightweight
carbon fiber loaded cone assembly along with a high excursion
triple roll constant geometry surround. This combination pro-
vides remarkable strength, high efficiency and a peak to peak
maximum excursion of 38mm. Woofer features REDCATT
double silicone sealed spider.
Power Handling
At the core of the 15NPW is it’s voice coil technology featuring
a composite Polyimide former material capable of withstanding
peak temperatures in excess of 350degC, well beyond the ther-
mal requirements of modern professional audio systems.
The 15NPW cone and dust cap are made using an ad-
vanced carbon fiber loaded REDCATT pulp. The woofer cone
is also extensively treated to withstand harsh environments and
high humidity. Metal parts in the speaker assembly are coated
for extreme weatherization protection.
2400 watts 97 dB 42 Hz 35 Hz - 2,500 Hz 4” 1in/1out Copper Paper w. CF/ Fabric Neodymium
15NPW
APPLICATION:
• Ideal for ported or band pass subwoofer designs where siz-
able amount of low frequencies is required
Ordering code: 15NPW-016 Neodymium Low Frequency Woofer
14. 15FHW
General Specifications
Nominal Diameter:
Rated Impedance:
Power Handling:
AES Power:
Power Compression @-10dB
Power Compression @-10dB
Power Compression @Max Power
Maximum Recommended Xover Freq.:
Recommended Enclosure Volume:
Cone Design:
Fs
Re
Sd
Qms
Qes
Qts
Vas
Mms
BL product (force factor)
Mathematical X-Max (mm)
Le (mH @1kHz)
Overall diameter
No. of mounting holes
Bolt circle diameter
Front mount baffle cutout dia.
Rear mount baffle cutout diameter
Total depth
Flange and gasket thickness
Net weight
Shipping weight
Packing Dimensions
381 mm (15 in.)
8 ohm
350 Watts
0.7dB
1.9dB
2.4dB
1,400 Hz
25 - 50 Liters 0.88-1.77cuft.
Strght Gmtry, Redcatt Cell.
19 Hz
5.9 Ohm
804 cm2
(124.6 in.2
)
10
0.56
0.53
315 Liters
172 g
15.6 Tm
6.5
0.852
385 mm ( 15.12 in.)
8
371 mm (14.6 in.)
247mm (13.66 in.)Nominal
247 mm (13.66 in.)Nominal
184.2 mm (7.25 in.)
10 mm ( 0.39 in.)
7.70 kg (17 lbs.)
8.9 kg (19.6 lbs.)
410x410x215mm
Cont. Power | Sens. | Fs | Freq. Range | VC Dia. | VC Wire | Cone/Surround/Dome | Magnet type |
371
8xM6screws
122.50
184.2
381
165
385
2.30
347
Ordering code: 15FHW-089
APPLICATION:
• The 15FHW is ideal for use in vented port or band pass applications,
where sizable amount of sub-woofer frequencies is required.
The 15FHW is an ultra low frequency sub-woofer, designed
to deliver large amounts of very low frequencies. With 90 dB 1watt / 1
meter sensitivity, you find this 15-inch sub-woofer with incredibly linear
frequency response characteristics ideally assembled in sub-woofers
for hi-fi, gaming, studios or cinema. The 15FHW uses a strong paper
cone, along with a high excursion single roll rubber surround. Rubber
surround material was specifically developed for this application. The
shape of the surround roll was FEM optimized to ensure low distortion in
whole working range.
Power Handling
At the core of the 15FHM is it’s voice coil technology featuring a compos-
ite Polyimide former material capable of withstanding peak temperatures
in excess of 200°C, well beyond the thermal requirements of modern
professional audio systems.
REDCATT has implemented a Nomex(r)
spider design to ensure long
term Fs memory, consistency and diminish anomalies associated with
spider deterioration.
Ferrite Sub Woofer
700 watts 90 dB 19 Hz 20 Hz - 1.8 kHz 2.5” Copper Paper / Rubber Ferrite
Level
Ohm
Frequency (Hz)
50
20
2 5 50 100 200 5k 10k 30k
30
40
80
90
100
60
70
10
10 20 500 1k 2k 20k
Frequency Response
Impedance Response
Frequency response measurement with transducer
mounted in a 40 liter vented enclosure tuned to 65Hz
Level
SPL
Frequency (Hz)
120
100
60
40
80
20 50 100 200 500 1k 2k 5k 10k 20k
20
15. General Specifications
Nominal Diameter:
Rated Impedance:
Power Handling:
AES Power:
Power Compression @-10dB
Power Compression @-10dB
Power Compression @Max Power
Maximum Recommended Xover Freq.:
Recommended Enclosure Volume:
Cone Design:
Fs
Re
Sd
Qms
Qes
Qts
Vas
Mms
BL product (force factor)
Peak to peak displacement (mm)
Le (mH @1kHz)
Overall diameter
No. of mounting holes
Bolt circle diameter
Front mount baffle cutout dia.
Rear mount baffle cutout diameter
Total depth
Flange and gasket thickness
Net weight
Shipping weight
Packing Dimensions
320 mm (12 in.)
8 ohm
800 Watts
0.7dB
1.5dB
2.2dB
1,500 Hz
35 - 80 Liters 1.25-2.83cuft.
Exp. Gmtry, Redcatt Cell.
42 Hz
5.7 Ohm
551 cm2
(85.4 in.2
)
15
0.21
0.2
66 Liters
109 g
27 Tm
10.5
1.61
322 mm ( 12.7 in.)
8
302 mm (11.9 in.)
290mm (11.42 in.)Nominal
287 mm ( 11.3 in.)Nominal
164 mm (6.46 in.)
10 mm ( 0.39 in.)
8.1 kg (17.8 lbs.)
8.7 kg (19.1 lbs.)
340x340x170mm
Cont. Power | Sens. | Fs | Freq. Range | VC Dia. | VC Wire | Cone/Surround/Dome | Magnet type
Level
Ohm
Frequency (Hz)
200
50
0
2 5 20 50 100 500 1k 2k
100
150
250
300
350
10 200 5k 10k 20k
Frequency Response
Impedance Response
Frequency response measurement with transducer
mounted in a 40 liter vented enclosure tuned to 65Hz
Level
SPL
Frequency (Hz)
100
60
40
80
20 50 100 200 2k
20
90
70
50
30
10
The 122NPW is a high efficiency, (97 dB 1watt / 1 me-
ter) 12-inch woofer with incredibly linear frequency response
characteristics, extreme high power handling capability while
generating low harmonic distortion artifacts. The 122NPW uses
a lightweight carbon fiber loaded cone assembly along with a
high excursion triple roll constant geometry surround. This
combination provides remarkable strength, high efficiency and
a peak to peak maximum excursion of 22mm (0.9in). Woofer
features REDCATT double silicone sealed spider.
Power Handling
At the core of the 122NPW is it’s voice coil technology featuring
a composite Polyimide former material capable of withstanding
peak temperatures in excess of 350degC, well beyond the ther-
mal requirements of modern professional audio systems.
The woofer cone is also extensively treated to with-
stand harsh environments and high humidity. Metal parts in
the speaker assembly are coated for extreme weatherization
protection.
1600 watts 97 dB 42 Hz 35 Hz - 2,500 Hz 4” 1in/1out Copper Paper w. CF/ Fabric Neodymium
122NPW
APPLICATION:
• Ideal for ported or band pass subwoofer designs where siz-
able amount of low frequencies is required
Ordering code: 122NPW-102 Neodymium Low Frequency Woofer
16. 121FPW
General Specifications
Nominal Diameter:
Rated Impedance:
Power Handling:
AES Power:
Power Compression @-10dB
Power Compression @-10dB
Power Compression @Max Power
Maximum Recommended Xover Freq.:
Recommended Enclosure Volume:
Cone Design:
Fs
Re
Sd
Qms
Qes
Qts
Vas
Mms
BL product (force factor)
Mathematical X-Max (mm)
Le (mH @1kHz)
Front Plate Thickness:
Winding Height:
Overall diameter
No. of mounting holes
Bolt circle diameter
Front mount baffle cutout dia.
Rear mount baffle cutout diameter
Total depth
Flange and gasket thickness
Net weight
Shipping weight
Packing Dimensions
320 mm (12 in.)
8 ohm
550 Watts
0.5dB
1.4dB
2.3dB
2,500 Hz
35 - 45 Liters 1.2 - 1.5 cuft.
Strght Gmtry, Redcatt Cell.
45 Hz
5.92 Ohm
531 cm2
(82.3 in.2
)
8.3
0.26
0.25
58 Liters
73 g
23.0 Tm
10.5 mm
1.2
10mm (0.393 in.)
21mm (0.826 in.)
315 mm ( 12.4 in.)
8
298 mm (11.7 in.)
283mm (11.1 in.)Nominal
282 mm ( 11.05 in.)
147 mm (5.5 in.)
14 mm ( 0.86 in.)
9.2 kg (20.1 lbs.)
10.2 kg (22.5 lbs.)
340x340x170mm (13.5x13.5x7 in.)
Cont. Power | Sens. | Fs | Freq. Range | VC Dia. | VC Wire | Cone/Surround/Dome | Magnet type |
315
298
M6 Screw
284.65
200
97
147
12
⑧
⑦
⑥
③
⑤
②
④
①
Level
Ohm
Frequency (Hz)
60
20
0
2 5 10 20 50 200 1k 2k
30
40
70
80
90
5k 10k 20k
50
100 500
100
110
120
130
Frequency Response
Impedance Response
Frequency response measurement with transducer
mounted in a 40 liter vented enclosure tuned to 65Hz
Level
SPL
Frequency (Hz)
120
100
60
40
80
20 50 100 200 500 1k 2k 5k 10k 20k
20
Ordering code: 121FPW-034
APPLICATION:
• The 121FPW is ideal for use in vented port or band pass applications,
where sizable amount of sub-woofer frequencies is required. Designed
for 2-way and multi-way system applications usage.
The 121FPW is a high efficiency, (98 dB 1watt / 1 meter)
12inch woofer with incredibly linear frequency response characteristics,
high power handling capability while generating low harmonic distortion
artifacts. The 121FPW uses a unique REDCATT developed lightweight
mica loaded cone assembly along with a high excursion double roll con-
stant geometry surround. This combination provides remarkable strength
and high efficiency.
The Cone
The 121FPW lightweight cone and dust cap are made using an advanced
Redcatt pulp with mica particles reinforcement. The advantage of this
unique cone material is the very high strength to mass ratio. The woofer
cone is also extensively treated to withstand harsh environments and high
humidity. Metal parts in the speaker assembly are coated for extreme
weatherization protection.
Ferrite Woofer
825 watts 98 dB 45 Hz 40 Hz - 2.5 kHz 3” 1in/1out Copper Mica Paper / Fabric Ferrite
17. General Specifications
Nominal Diameter:
Rated Impedance:
Power Handling:
AES Power:
Power Compression @-10dB
Power Compression @-10dB
Power Compression @Max Power
Maximum Recommended Xover Freq.:
Recommended Enclosure Volume:
Cone Design:
Front Plate Thickness:
Winding Height:
Fs
Re
Sd
Qms
Qes
Qts
Vas
Mms
BL product (force factor)
Peak to peak displacement (mm)
Le (mH @1kHz)
Overall diameter
No. of mounting holes
Bolt circle diameter
Front mount baffle cutout dia.
Rear mount baffle cutout diameter
Total depth
Flange and gasket thickness
Net weight
Shipping weight
Packing Dimensions
320 mm (12 in.)
8 ohm
550 Watts
0.7dB
1.5dB
2.2dB
2,000 Hz
35 - 45 Liters 1.2- 1.5cuft.
Exp. Gmtry, Redcatt Cell.
10mm
19mm
54 Hz
4.62 Ohm
520 cm2
(81 in.2
)
4.5
0.32
0.3
89 Liters
56 g
16.7 Tm
6.5
1.0
315 mm ( 12.4 in.)
8
298 mm (11.7 in.)
283mm (11.1 in.)
282 mm ( 11.05 in.)Nominal
141 mm (5.5 in.)
14 mm ( 0.55 in.)
3.90 kg (8.6 lbs.)
4.5 kg (9.9 lbs.)
340x340x170mm (13.5x13.5x7 in.)
315
298
6-M6 Screws
142.50
97
284.50
119
Cont. Power | Sens. | Fs | Freq. Range | VC Dia. | VC Wire | Cone/Surround/Dome | Magnet type
Level
SPL
Frequency (Hz)
110
100
90
80
70
20 50 100 200 500 1k 2k 5k 10k 20k
Level
Ohm
Frequency (Hz)
120
100
60
20
0
20 40 100 200 500 1k 2k 5k 10k 20k
Frequency Response
Impedance Response
Frequency response measurement with transducer mount-
ed in a 40 liter vented enclosure tuned to 65Hz
The 12NPM is a high efficiency, (98.5 dB 1watt / 1
meter) 12-inch mid bass woofer with incredibly linear fre-
quency response characteristics, extreme high power handling
capability while generating low harmonic distortion artifacts.-
The 12NPM uses a lightweight carbon fiber loaded cone
assembly along with a precision double roll constant geometry
surround. This combination provides remarkable strength, high
efficiency and a excursion linearity of 7.5mm.
Magnetic Circuit
REDCATT engineers have developed a lightweight, inside-neo-
dymium slug based magnetic circuit capable of delivering
the highest level of performance providing a consistent, high
integrity magnetic flux gap, ultra low distortion characteristic
and high efficiency cooling system. The magnetic circuit design
is optimized to generate the minimum amount of flux modula-
tion, providing exceptional stability.
825 watts 98.9 dB 54 Hz 50 Hz - 2,000 Hz 3” 1in/1out CCAW Paper w. CF/ Fabric Neodymium
12NPM
APPLICATION:
• Ideal for two-way and multi-way (line arrays) enclosure de-
signs. Also suitable for vented or double band-pass subwoofers.
Ordering code: 12NPM-054 Neodymium Mid-bass Woofer
18. 121NPM
General Specifications
Nominal Diameter:
Rated Impedance:
Power Handling:
AES Power:
Power Compression @-10dB
Power Compression @-10dB
Power Compression @Max Power
Maximum Recommended Xover Freq.:
Recommended Enclosure Volume:
Cone Design:
Front Plate Thickness:
Winding Height:
Fs
Re
Sd
Qms
Qes
Qts
Vas
Mms
BL product (force factor)
Peak to peak displacement (mm)
Le (mH @1kHz)
Overall diameter
No. of mounting holes
Bolt circle diameter
Front mount baffle cutout dia.
Rear mount baffle cutout diameter
Total depth
Flange and gasket thickness
Net weight
Shipping weight
Packing Dimensions
320 mm (12 in.)
8 ohm
450 Watts
0.7dB
1.5dB
2.2dB
2,000 Hz
8 - 40 Liters 0.28- 1.5cuft.
Exp. Gmtry, Redcatt Cell.
10mm
13mm
46 Hz
6.74 Ohm
531 cm2
(82.3 in.2
)
8.3
0.199
0.195
82 Liters
56 g
24 Tm
6.5
0.59
315 mm ( 12.4 in.)
8
298 mm (11.7 in.)
283mm (11.1 in.)Nominal
282 mm (11.05 in.)Nominal
136 mm (5.35 in.)
14 mm ( 0.55 in.)
3.70 kg (8.2 lbs.)
4.5 kg (9.9 lbs.)
340x340x170mm (13.5x13.5x7 in.)
Cont. Power | Sens. | Fs | Freq. Range | VC Dia. | VC Wire | Cone/Surround/Dome | Magnet type |
315
6.50
298
135.80
99.30
285
Level
Ohm
Frequency (Hz)
80
20
0
20 20 50 100 200 500 1k 2k
40
60
100
120
140
160
Frequency Response
Impedance Response
Frequency response measurement with transducer
mounted in a 40 liter vented enclosure tuned to 65Hz
Level
SPL
Frequency (Hz)
120
100
60
40
80
20 50 100 200 500 1k 2k 5k 10k 20k
20
Ordering code: 121NPM-079
APPLICATION:
• Ideal for two-way and multi-way (line arrays) enclosure designs
where sizable amount of mid frequencies is required
The 121NPM is a ultra high efficiency, (101dB 1watt / 1
meter) 12-inch mid bass woofer with incredibly linear frequency
response characteristics, extreme high power handling capability
while generating low harmonic distortion artifacts.-
The 121NPM uses a lightweight carbon fiber loaded cone
assembly along with a precision double roll constant geometry
surround. This combination provides remarkable strength, high
efficiency and a excursion linearity of 7.5mm.
Magnetic Circuit
REDCATT engineers have developed a lightweight, neodym-
ium outside ring based magnetic circuit capable of delivering
the highest level of performance providing a consistent, high
integrity magnetic flux gap, ultra low distortion characteristic
and high efficiency cooling system. The magnetic circuit design is
optimized to generate the minimum amount of flux modulation,
providing exceptional stability.
Neodymium Mid-bass Woofer
650 watts 101 dB 46 Hz 50 Hz - 4,000 Hz 3” 1in/1out CCAW Paper CF / Fabric Neodymium
19. General Specifications
Nominal Diameter:
Rated Impedance:
Power Handling:
AES Power:
Power Compression @-10dB
Power Compression @-10dB
Power Compression @Max Power
Maximum Recommended Xover Freq.:
Recommended Enclosure Volume:
Cone Design:
Front Plate Thickness:
Winding Height:
Fs
Re
Sd
Qms
Qes
Qts
Vas
Mms
BL product (force factor)
Peak to peak displacement (mm)
Le (mH @1kHz)
Overall diameter
No. of mounting holes
Bolt circle diameter
Front mount baffle cutout dia.
Rear mount baffle cutout diameter
Total depth
Flange and gasket thickness
Net weight
Shipping weight
Packing Dimensions
250 mm (10 in.)
8 ohm
200 Watts
0.6dB
1.2dB
2.2dB
3,800 Hz
15 - 40 Liters
Exp. Gmtry, Redcatt Cell.
8 mm
13 mm
64 Hz
5.1 Ohm
363 cm2
(56.3 in.2
)
6.2
0.57
0.51
38 Liters
29.7 g
9.4 Tm
8 mm
0.48
261 mm ( 10.3 in.)
8
245 mm (9.6 in.)
230mm (8.8 in.) Nominal
232 mm ( 9.1 in.) Nominal
164 mm (6.46 in.)
10 mm ( 0.39 in.)
1.9 kg (4.2 lbs.)
2.8 kg (6.2 lbs.)
330x330x160mm (13x13x6.3 in.)
261.20
246
8- 6.50
8
261.20
11.35
3.35
76
41
111.50
229
Cont. Power | Sens. | Fs | Freq. Range | VC Dia. | VC Wire | Cone/Surround/Dome | Magnet type
Level
Ohm
Frequency (Hz)
200
50
0
2 5 20 50 100 500 1k 2k
100
150
250
300
350
10 200 5k 10k 20k
Frequency Response
Impedance Response
Frequency response measurement with transducer
mounted in a 15 liter vented enclosure tuned to 50Hz
Level
SPL
Frequency (Hz)
100
60
40
80
20 50 100 200 2k
20
90
70
50
30
10
10k
The 101NPM is a high efficiency, (96 dB 1watt / 1
meter) 10-inch mid-woofer with incredibly linear frequency
response characteristics, high power handling capability, while
generating ultra low harmonic distortion artifacts. The 101NPM
uses a lightweight glass fiber loaded cone assembly along with a
high excursion triple roll surround. This combination provides
a lightweight, yet strong, piston, high efficiency and a peak to
peak maximum excursion of 8mm (0.31in).
Magnetic Circuit
REDCATT engineers have developed a ultra lightweight, inside
neodymium slug based magnetic circuit, capable of delivering
the highest level of performance, providing a consistent, high
integrity magnetic flux gap, ultra low distortion characteristic
and high efficiency cooling system. The magnetic structure has
integrated two aluminum shorting rings. The magnetic circuit
design is optimized to generate the minimum amount of flux
modulation, providing exceptional stability.
400 watts 96 dB 64 Hz 40 Hz - 4,500 Hz 2” 1out CCAW edge Paper w. GF/ Fabric Neodymium
101NPM
APPLICATION:
• Ideal for two-way and multi-way (line arrays) enclosure designs,
portable system where lightweight construction is required
Ordering code: 101NPM-119 Neodymium Mid-bass Woofer
20. 123NPM
General Specifications
Nominal Diameter:
Rated Impedance:
Power Handling:
AES Power:
Power Compression @-10dB
Power Compression @-10dB
Power Compression @Max Power
Maximum Recommended Xover Freq.:
Recommended Enclosure Volume:
Cone Design:
Front Plate Thickness:
Winding Height:
Fs
Re
Sd
Qms
Qes
Qts
Vas
Mms
BL product (force factor)
Peak to peak displacement (mm)
Le (mH @1kHz)
Overall diameter
No. of mounting holes
Bolt circle diameter
Front mount baffle cutout dia.
Rear mount baffle cutout diameter
Total depth
Flange and gasket thickness
Net weight
Shipping weight
Packing Dimensions
320 mm (12 in.)
8 ohm
800 Watts
0.55dB
1.3dB
1.9dB
2,800 Hz
15 - 90 Liters 0.53- 3.2cuft.
Exp. Gmtry, Redcatt Cell.
12mm
23.5mm
39 Hz
6.2 Ohm
551 cm2
(85.4 in.2
)
6.47
0.43
0.4
70 Liters
94 g
19 Tm
22mm
0.6
302 mm ( 11.9 in.)
8
302 mm (11.9 in.)
284mm (11.18 in.)Nominal
295 mm (11.6 in.)Nominal
140.5 mm (5.33 in.)
11.3 mm ( 0.44 in.)
6.3 kg (13.9 lbs.)
7.6 kg (16.8 lbs.)
34x34x17cm (13.5x13.5x7 in.)
Cont. Power | Sens. | Fs | Freq. Range | VC Dia. | VC Wire | Cone/Surround/Dome | Magnet type |
302
8-M6
284.20
144
140.50
320
11.30
Level
Ohm
Frequency (Hz)
80
20
0
2 5 20 50 100 500 1k 2k
40
60
100
120
10 200 5k 10k 20k
Frequency Response
Impedance Response
Frequency response measurement with transducer
mounted in a 40 liter vented enclosure tuned to 65Hz
Level
SPL
Frequency (Hz)
100
60
40
80
20 50 100 200 2k
20
90
70
50
30
10
500 1k
Ordering code: 123NPM-185
APPLICATION:
• Ideal for high quality subwoofers, two way in multiway systems, where
sizable amounts of low frequency acoustic power is desired, combined
with uncompromised mid frequencies output.
The 123NPM is a truely unique full range woofer. We
have designed cutting edge product, using the best avail-able ma-
terials and highly optimized design for the best performance in
its class. It delivers very high efficiency, (97 dB 1watt / 1 meter),
incredibly linear frequency response characteristics with extend-
ed HF frequency response, extreme high power handling capabil-
ity, while generating ultra low harmonic distortion artifacts. The
123NPM uses a lightweight carbon fiber loaded cone assem-
bly along with a high excursion triple roll constant geometry
surround. This combination provides remarkable strength, high
efficiency and a peak to peak linear excursion of 22mm (0.9in).
Magnetic Circuit
The magnetic circuit features two aluminum shorting rings, dou-
ble air-gap front plate. The cooling system and the air flow has
been designed using the modern FEM techniques and further
optimized to provide the highest levels of cooling efficiency. The
magnetic circuit design is optimized to generate the minimum
amount of flux modulation, providing exceptional stability.
Neodymium Woofer
1,600 watts 97 dB 39 Hz 35 Hz - 3,000 Hz 4” out AL-R Paper CF / Fabric Neodymium
21. Cont. Power | Sens. | Fs | Freq. Range | VC Dia. | VC Wire | Cone/Surround/Dome | Magnet type
22. 10FHW
General Specifications
Nominal Diameter:
Rated Impedance:
Power Handling:
AES Power:
Power Compression @-10dB
Power Compression @-10dB
Power Compression @Max Power
Maximum Recommended Xover Freq.:
Recommended Enclosure Volume:
Cone Design:
Front Plate Thickness:
Winding Height:
Fs
Re
Sd
Qms
Qes
Qts
Vas
Mms
BL product (force factor)
Peak to peak displacement (mm)
Le (mH @1kHz)
Overall diameter
No. of mounting holes
Bolt circle diameter
Front mount baffle cutout dia.
Rear mount baffle cutout diameter
Total depth
Flange and gasket thickness
Net weight
Shipping weight
Packing Dimensions
254 mm (10 in.)
4 ohm
100 Watts
0.7dB
1.2dB
2.3dB
1,800 Hz
15 - 30 Liters
Exp. Gmtry
8mm
34.5 mm
23 Hz
3.4 Ohm
252 cm2
(39 in.2
)
4.91
0.45
0.41
41.8 Liters
95 g
10.5 Tm
13.25 mm
1.24
269 mm ( 10.6 in.)
8
257 mm (10.12 in.)
238 mm (9.37 in.)Nominal
230 mm ( 9.1 in.)Nominal
114.5 mm (4.51 in.)
-- --
5 kg (8.11 lbs.)
5.90 kg (13 lbs.)
30x30x16 cm (11.8x11.8x6.3in)
Cont. Power | Sens. | Fs | Freq. Range | VC Dia. | VC Wire | Cone/Surround/Dome | Magnet type |
257
8-5.50
269
132.30
6.60
238
114.40
140
Level
Ohm
Frequency (Hz)
60
20
0
2 5 10 20 100 1k
30
50
70
80
50 2k 10k 20k
40
10
200 500 5k
Frequency Response
Impedance Response
Frequency response measurement with transducer
mounted in a 20 liter vented enclosure tuned to 65Hz
Level
SPL
Frequency (Hz)
90
60
20 50 100 200 2k
10
80
70
50
40
10k 20k5k1k500
20
30
Ordering code: 10FHW-118
APPLICATION:
• Use in smaller volume, vented port applications where large
amounts of very low frequency response is desired. Typical example
could be hi-fi subwoofers, gaming or cinema sub-woofers
The 10FHW is a high efficiency, (84dB 1watt / 1 meter) 10-inch woofer
speaker with extended low frequency response and high power handling
capability. The 10FHW uses a strong anodized aluminum cone assembly
along with a single roll rubber surround. Spider is Nomex material with
stitched-in tinsel wires. This ensures long lasting performance even in
high powered applications. The chosen material combination provides
remarkable strength, high efficiency and sustained output under extreme
conditions.
Magnetic Circuit
REDCATT engineers have developed a ferrite based magnetic circuit,
capable of delivering the highest level of performance, providing a consis-
tent, high integrity magnetic flux gap, ultra low distortion characteristic
and high efficiency cooling system. The magnetic structure has integrated
two aluminum shorting rings. The magnetic circuit design is optimized to
generate the minimum amount of flux modulation, providing exceptional
stability.
Ferrite Sub-Woofer
200 watts 84 dB 23 Hz 15 Hz - 2,800 Hz 2” 1out Copper Aluminum / Rubber Ferrite
23. General Specifications
Nominal Diameter:
Rated Impedance:
Power Handling:
AES Power:
Power Compression @-10dB
Power Compression @-10dB
Power Compression @Max Power
Maximum Recommended Xover Freq.:
Recommended Enclosure Volume:
Cone Design:
Front Plate Thickness:
Winding Height:
Fs
Re
Sd
Qms
Qes
Qts
Vas
Mms
BL product (force factor)
Peak to peak displacement (mm)
Le (mH @1kHz)
Overall diameter
No. of mounting holes
Bolt circle diameter
Front mount baffle cutout dia.
Rear mount baffle cutout diameter
Total depth
Flange and gasket thickness
Net weight
Shipping weight
Packing Dimensions
254 mm (10 in.)
4 ohm
100 Watts
0.7dB
1.2dB
2.3dB
1,800 Hz
15 - 30 Liters
Exp. Gmtry, 1REDCATT pulp
8 mm
32.5 mm
19 Hz
3.68 Ohm
345 cm2
(53.5 in.2
)
1.99
0.47
0.38
41.8 Liters
95 g
12.9 Tm
36 mm
0.65
269 mm ( 10.6 in.)
8
257 mm (10.12 in.)
238mm (9.37 in.) Nominal
230 mm ( 9.1 in.) Nominal
116 mm (4.57 in.)
-- --
5.2 kg (11.5 lbs.)
6.1 kg (13 lbs.)
30x30x16cm (11.8x11.8x6.3 in.)
257
8-5.50
269
133.80
6.60
115.90
238
147
Cont. Power | Sens. | Fs | Freq. Range | VC Dia. | VC Wire | Cone/Surround/Dome | Magnet type
Frequency Response
Level
SPL
Frequency (Hz)
90
60
20 50 100 200 2k
10
80
70
50
40
10k 20k5k1k500
20
30
Level
Ohm
Frequency (Hz)
35
15
5
2 5 10 20 100 1k
20
30
40
45
50 2k 10k 20k
25
10
200 500 5k
Frequency response measurement with transducer
mounted in a 25 liter vented enclosure tuned to 35Hz
Impedance Response
The 101FPW is a high effciency, (86dB 1watt / 1
meter) 10-inch woofer speaker with extended low frequency
re-sponse and high power handling capability. The 101FHW
uses a strong glass fbre reinforced paper cone assembly along
with a single roll rubber surround. Spider is Nomex material
with stitched-in tinsel wires. This ensures long lasting perfor-
mance even in high powered applications. The chosen material
combination provides remarkable strength, high effciency and
sustained output under ex-treme conditions.
The 101FHW cone and dust cap are made using glass fbre
loaded paper pulp. All “soft” parts are bonded together using
state of the art high temperature adhesives. Met-al parts in the
speaker assembly are coated for extreme weatherization protec-
tion. Speaker push terminals are gold plated to ensure the best
connection.
200 watts 86 dB 19 Hz 14 Hz - 2,000 Hz 2.0” Copper Paper/ Rubber Ferrite
101FHW
APPLICATION:
• Ideal for sealed or vented two-way and multi-way high quality
audio designs. Example: studio monitors or hi-fi products.
Ordering code: 101FHW-117 Ferrite Sub-Woofer
24. 10NPM
General Specifications
Nominal Diameter:
Rated Impedance:
Power Handling:
AES Power:
Power Compression @-10dB
Power Compression @-10dB
Power Compression @Max Power
Maximum Recommended Xover Freq.:
Recommended Enclosure Volume:
Cone Design:
Front Plate Thickness:
Winding Height:
Fs
Re
Sd
Qms
Qes
Qts
Vas
Mms
BL product (force factor)
Peak to peak displacement (mm)
Le (mH @1kHz)
Overall diameter
No. of mounting holes
Bolt circle diameter
Front mount baffle cutout dia.
Rear mount baffle cutout diameter
Total depth
Flange and gasket thickness
Net weight
Shipping weight
Packing Dimensions
250 mm (10 in.)
8 ohm
550 Watts
0.7dB
1.5dB
2.2dB
2,500 Hz
4 - 30 Liters
Exp. Gmtry, Redcatt Cell.
10.5mm
18.6mm
60 Hz
4.73 Ohm
320 cm2
(49.6 in.2
)
8
0.29
0.28
29 Liters
49 g
16.7 Tm
6.5
0.9
261 mm ( 10.3 in.)
8
245 mm (9.6 in.)
230mm (8.8 in.)Nominal
232 mm ( 9.1 in.)Nominal
113 mm (4.4 in.)
13 mm ( 0.5 in.)
2.9 kg (6.4 lbs.)
3.5 kg (7.7 lbs.)
330x330x160mm(13x13x6.3 in.)
Cont. Power | Sens. | Fs | Freq. Range | VC Dia. | VC Wire | Cone/Surround/Dome | Magnet type |
Level
Ohm
Frequency (Hz)
40
10
0
2 5 10 20 50 500 1k 2k
20
30
50
60
70
80
100 200 5k 10k 20k
90
Frequency Response
Impedance Response
Frequency response measurement with transducer
mounted in a 40 liter vented enclosure tuned to 65Hz
Level
SPL
Frequency (Hz)
120
100
60
40
80
20 50 100 200 500 1k 2k 5k 10k 20k
20
Ordering code: 10NPM-055
APPLICATION:
• Ideal for two-way and multi-way (line arrays) enclosure de-
signs. Also suitable for vented or double band-pass subwoofers.
The 10NPM is a high efficiency, (98.5 dB 1watt / 1
meter) 10-inch mid bass woofer with incredibly linear frequency
response characteristics, extreme high power handling capability
while generating low harmonic distortion artifacts.-
The 10NPM uses a lightweight carbon fiber loaded cone assembly
along with a precision double roll constant geometry surround.
This combination provides remarkable strength, high efficiency
and a excursion linearity of 7.5mm.
Magnetic Circuit
REDCATT engineers have developed a lightweight, inside-neo-
dymium slug based magnetic circuit capable of delivering
the highest level of performance providing a consistent, high
integrity magnetic flux gap, ultra low distortion characteristic
and high efficiency cooling system. The magnetic circuit design is
optimized to generate the minimum amount of flux modulation,
providing exceptional stability.
Neodymium Mid-bass Woofer
825 watts 98.5 dB 60 Hz 50 Hz - 3,000 Hz 3” 1in/1out CCAW Paper CF / Fabric Neodymium
25. General Specifications
Nominal Diameter:
Rated Impedance:
Power Handling:
AES Power:
Power Compression @-10dB
Power Compression @-10dB
Power Compression @Max Power
Maximum Recommended Xover Freq.:
Recommended Enclosure Volume:
Cone Design:
Front Plate Thickness:
Winding Height:
Fs
Re
Sd
Qms
Qes
Qts
Vas
Mms
BL product (force factor)
Peak to peak displacement (mm)
Le (mH @1kHz)
Overall diameter
No. of mounting holes
Bolt circle diameter
Front mount baffle cutout dia.
Rear mount baffle cutout diameter
Total depth
Flange and gasket thickness
Net weight
Shipping weight
Packing Dimensions
250 mm (10 in.)
8 ohm
425 Watts
0.4dB
1.6dB
2.2dB
2,500 Hz
10 - 40 Liters
Exp. Gmtry, Redcatt Cell.
8 mm
13 mm
64 Hz
6.04 Ohm
346 cm2
(53.6 in.2
)
15.84
0.38
0.37
33.8 Liters
30.7 g
14.1 Tm
16
0.41
262 mm ( 10.3 in.)
8
246 mm (9.68 in.)
231mm (9.1 in.) Nominal
230 mm ( 9.05 in.) Nominal
117.5 mm (4.62 in.)
7.75 mm ( 0.3 in.)
4.55 kg (10 lbs.)
5.5 kg (12.1 lbs.)
275x275x125mm (11x11x6 in.)
262
255.50
165
117.50
1.5079
230
246
Cont. Power | Sens. | Fs | Freq. Range | VC Dia. | VC Wire | Cone/Surround/Dome | Magnet type
Level
SPL
Frequency (Hz)
110
100
90
80
70
20 50 100 200 500 1k 2k 5k 10k 20k
Frequency Response
Frequency response measurement with transducer mount-
ed in a 35 liter vented enclosure tuned to 55Hz
Impedance Response
Level
Ohm
Frequency (Hz)
120
90
60
30
0
20 40 100 200 500 1k 2k 5k 10k 20k
The 10FIND is a high efficiency, (97 dB 1watt / 1 me-
ter) 10-inch woofer with linear frequency response characteris-
tics, high power handling capability, while generating ultra low
harmonic distortion artifacts. The 10FIND uses a lightweight
glass fiber loaded cone assembly along with a high excursion
triple roll surround. This combination provides a lightweight,
yet strong, piston.
Magnetic Circuit
REDCATT engineers have developed a ferrite based magnetic
circuit, capable of delivering the highest level of performance,
providing a consistent, high integrity magnetic flux gap, ultra
low distortion characteristic and high efficiency cooling system.
The magnetic structure has integrated two aluminum shorting
rings. The magnetic circuit design is optimized to generate the
minimum amount of flux modulation, providing exceptional
stability.
650 watts 97 dB 64 Hz 55 Hz - 4,500 Hz 3” Copper Paper w. GF/ Fabric Ferrite
10FIND
APPLICATION:
• Ideal for two-way and multi-way (line arrays) enclosure designs,
vented or band-pass subwoofers enclosure designs
Ordering code: 10FIND-033 Ferrite Woofer
26. 8FIND
General Specifications
Nominal Diameter:
Rated Impedance:
Power Handling:
AES Power:
Power Compression @-10dB
Power Compression @-10dB
Power Compression @Max Power
Maximum Recommended Xover Freq.:
Recommended Enclosure Volume:
Cone Design:
Front Plate Thickness:
Winding Height:
Fs
Re
Sd
Qms
Qes
Qts
Vas
Mms
BL product (force factor)
Peak to peak displacement (mm)
Le (mH @1kHz)
Overall diameter
No. of mounting holes
Bolt circle diameter
Front mount baffle cutout dia.
Rear mount baffle cutout diameter
Total depth
Flange and gasket thickness
Net weight
Shipping weight
Packing Dimensions
200 mm (8 in.)
8 ohm
225 Watts
0.5dB
1.4dB
2.3dB
3,000 Hz
10 - 40 Liters
Exp. Gmtry, Redcatt Cell.
8 mm
12 mm
68 Hz
5.5 Ohm
226 cm2
(35 in.2
)
6.3
0.3
0.28
18.3 Liters
20.3 g
11.54 Tm
10
0.44
209.5 mm ( 8.24 in.)
8
197.5 mm (7.78 in.)
184 mm (7.24 in.)Nominal
185 mm ( 7.25 in.)Nominal
98.5 mm (3.87 in.)
7.75 mm ( 0.3 in.)
4.2 kg (9.3 lbs.)
5.1 kg (11.3 lbs.)
220x220x110mm
Cont. Power | Sens. | Fs | Freq. Range | VC Dia. | VC Wire | Cone/Surround/Dome | Magnet type |
209.50
205.50
156
98.50
1.67
62.50
184
197.50
Level
SPL
Frequency (Hz)
110
100
90
80
70
20 50 100 200 500 1k 2k 5k 10k 20k
Frequency Response
Impedance Response
Frequency response measurement with transducer mount-
ed in a 180 liter vented enclosure tuned to 35Hz
Level
Ohm
Frequency (Hz)
80
60
40
20
0
20 40 1002 00 500 1k 2k 5k 10k 20k
Ordering code: 8FIND-030
APPLICATION:
• Ideal for two-way and multi-way (line arrays) enclosure de-
signs. Also suitable for vented or double band-pass subwoofers.
The 8FIND is a high efficiency, (94 dB 1watt / 1 meter)
8-inch mid bass woofer with incredibly linear frequency response
characteristics, high power handling capability while generating
low harmonic distortion artifacts.
The 8FIND uses a lightweight carbon fiber loaded cone assembly
along with a precision double roll surround. This combination
provides remarkable strength, high efficiency and a excursion
linearity of 7.5mm.
Magnetic Circuit
REDCATT engineers have developed an efficient, ferrite based
magnetic circuit, capable of delivering the highest level of per-
formance providing a consistent, high integrity magnetic flux
gap, low distortion characteristic. The magnetic circuit design is
optimized to generate the minimum amount of flux modulation,
providing exceptional stability.
Ferrite Mid-bass Woofer
450 watts 96 dB 68 Hz 70 Hz - 3,000 Hz 2.0” 2out CCAW Paper / Fabric Ferrite
27. General Specifications
Nominal Diameter:
Rated Impedance:
Power Handling:
AES Power:
Power Compression @-10dB
Power Compression @-10dB
Power Compression @Max Power
Maximum Recommended Xover Freq.:
Recommended Enclosure Volume:
Cone Design:
Front Plate Thickness:
Winding Height:
Fs
Re
Sd
Qms
Qes
Qts
Vas
Mms
BL product (force factor)
Peak to peak displacement (mm)
Le (mH @1kHz)
Overall diameter
No. of mounting holes
Bolt circle diameter
Front mount baffle cutout dia.
Rear mount baffle cutout diameter
Total depth
Flange and gasket thickness
Net weight
Shipping weight
Packing Dimensions
200 mm (8 in.)
8 ohm
200 Watts
0.4dB
0.9dB
1.8dB
3,000 Hz
4 - 20 Liters
Exp. Gmtry, Redcatt pulp
8 mm
15.8 mm
78 Hz
5.2 Ohm
224.5 cm2
(34.8 in.2
)
3.98
0.21
0.25
13 Liters
20 g
14.0 Tm
15.5
0.54
209.5 mm ( 8.25 in.)
8
197.5 mm (7.78 in.)
184 mm (7.25 in.) Nominal
190 mm (7.48 in.) Nominal
95.2 mm (3.75 in.)
5mm (0.2 in.)
1.75 kg (3.86 lbs.)
2.1 kg (4.6 lbs.)
30x30x16 cm (11.8x11.8x6.3 in.)
209.5
90.0
87.30
184
7.87
197.5
8x M5
Cont. Power | Sens. | Fs | Freq. Range | VC Dia. | VC Wire | Cone/Surround/Dome | Magnet type
Level
Ohm
Frequency (Hz)
35
15
0
20 5 50
20
30
40
50
100 20k
25
10
200 500 1k
45
Impedance Response
Frequency Response
Level
SPL
Frequency (Hz)
100
70
20 50 100 200 2k
20
90
80
60
50
10k 20k5k1k500
30
40
Frequency response measurement with mounted in 15li-
tre enclosure tuned to 70Hz
The 8NPM is a high efficiency, (98.5dB 1watt /
1 meter) 8-inch mid-woofer with extended mid frequency
response and high power handling capability. The 8NPM uses
a lightweight half pressed paper cone along with a double
roll fabric surround. Spider is made of Nomex material with
optimized shape for well controlled pistonic motion. The used
high quality components ensure long lasting performance even
in high powered applications. The chosen material combination
provides remarkable strength, high efficiency and sustained
output under extreme conditions.
Power Handling
The voice coil featuring Kapton former material capable of
withstanding peak temperatures in excess of 280C, well beyond
the thermal requirements of modern audio systems. Former
strength provides the ideal transfer of power between the voice
coil and the cone assembly and assists in reducing distortion
artifacts. By combining this material with state of the art adhe-
sives and our winding voice coil technology, the 8NPM delivers
incredibly high performance.
400 watts 98.5 dB 60 Hz 70 Hz - 4,000 Hz 2.0” CCAW Paper w. GF/ Fabric Neodymium
8NPM
APPLICATION:
• Ideal for two-way and multi-way (line arrays) enclosure designs,
where small size and weight factor is required.
Ordering code: 8NPM-157 Neodymium Woofer
28. 8FHW
General Specifications
Nominal Diameter:
Rated Impedance:
Power Handling:
AES Power:
Power Compression @-10dB
Power Compression @-10dB
Power Compression @Max Power
Maximum Recommended Xover Freq.:
Recommended Enclosure Volume:
Cone Design:
Front Plate Thickness:
Winding Height:
Fs
Re
Sd
Qms
Qes
Qts
Vas
Mms
BL product (force factor)
Peak to peak displacement (mm)
Le (mH @1kHz)
Overall diameter
No. of mounting holes
Bolt circle diameter
Front mount baffle cutout dia.
Rear mount baffle cutout diameter
Total depth
Flange and gasket thickness
Net weight
Shipping weight
Packing Dimensions
200 mm (8 in.)
8 ohm
200 Watts
0.7dB
1.9dB
2.4dB
1,400 Hz
15 - 40 Liters
Str. Gmtry, Redcatt Cell.
8mm
26.2mm
30 Hz
4.1 Ohm
213.8 cm2
(33.1 in.2
)
3.89
0.73
0.53
27 Liters
46.6 g
8.0 Tm
13 mm
0.7
214 mm ( 8.43 in.)
8
204 mm (8.03 in.)
184 mm (7.24 in.)Nominal
184 mm ( 7.24 in.)Nominal
119.3 mm (4.7 in.)
5 mm ( 0.2 in.)
3.70 kg (8.12 lbs.)
4.90 kg (10.8 lbs.)
225x225x135mm (8.9x8.9x5.3in.)
Cont. Power | Sens. | Fs | Freq. Range | VC Dia. | VC Wire | Cone/Surround/Dome | Magnet type |
R102
8-Ø5.10
Ø182
119.28
5
104.99
Ø110
20
Ø214
Level
Ohm
Frequency (Hz)
20
5
2 5 50 200 5k 10k 30k
10
15
35
40
45
25
30
10 20 500 1k 2k 20k
Frequency Response
Impedance Response
Frequency response measurement with transducer
mounted in a 20 liter vented enclosure tuned to 65Hz
Level
SPL
Frequency (Hz)
120
100
60
40
80
20 50 100 200 500 1k 2k 5k 10k 20k
20
Ordering code: 8FHW-088
APPLICATION:
• Use in smaller volume, vented port applications where large
amounts of very low frequency response is desired. Typical example
could be hi-fi subwoofers, gaming or cinema sub-woofers
The 8FHW is 8-inch low bass woofer with linear fre-
quency response characteristics, high power handling capability
while generating low harmonic distortion artifacts.
The single roll rubber surround design allows the cone to travel
in long linear motion. Together with lightweight cone,this
combination provides remarkable strength, high efficiency and a
excursion linearity of 13mm.
Magnetic Circuit
REDCATT engineers have developed an efficient, ferrite based
magnetic circuit, capable of delivering the highest level of per-
formance providing a consistent, high integrity magnetic flux
gap, low distortion characteristic. The magnetic circuit design is
optimized to generate the minimum amount of flux modulation,
providing exceptional stability.
Ferrite Woofer
300 watts 89 dB 30 Hz 20 Hz - 1,800 Hz 1.4” 1out Copper Paper / Rubber Ferrite
29. General Specifications
Nominal Diameter:
Rated Impedance:
Power Handling:
AES Power:
Power Compression @-10dB
Power Compression @-10dB
Power Compression @Max Power
Maximum Recommended Xover Freq.:
Recommended Enclosure Volume:
Cone Design:
Front Plate Thickness:
Winding Height:
Fs
Re
Sd
Qms
Qes
Qts
Vas
Mms
BL product (force factor)
Peak to peak displacement (mm)
Le (mH @1kHz)
Overall diameter
No. of mounting holes
Bolt circle diameter
Front mount baffle cutout dia.
Rear mount baffle cutout diameter
Total depth
Flange and gasket thickness
Net weight
Shipping weight
Packing Dimensions
200 mm (8 in.)
4 ohm
100 Watts
0.5dB
1.0dB
1.8dB
4,000 Hz
10 - 50 Liters
Exp. Gmtry, 1k CF honeycomb
8 mm
18.3 mm
45 Hz
3.6 Ohm
213.8 cm2
(33.14 in.2
)
15.2
0.4
0.39
37 Liters
24.6 g
8 Tm
18 mm
0.43
223.5 mm ( 8.8 in.)
6
197 mm (7.76 in.)
180mm (7.1 in.)Nominal
180 mm ( 7.1 in.)Nominal
100.5 mm (3.96 in.)
2 mm ( 0.08 in.)
2.8 kg (6.17lbs.)
3.2 kg (7.1 lbs.)
22x22x12cm (8.7x8.7x4.7 in.)
Cont. Power | Sens. | Fs | Freq. Range | VC Dia. | VC Wire | Cone/Surround/Dome | Magnet type
Frequency Response
Level
SPL
Frequency (Hz)
100
60
40
80
20 50 100 200 2k
20
90
70
50
30
10
5k 10k 20k1k500
Level
Ohm
Frequency (Hz)
80
20
0
2 5 20 50 100 500 1k 2k
40
60
100
100
140
10 200 5k 10k 20k
Frequency response measurement with transducer
mounted in a 25 liter vented enclosure tuned to 35Hz
Impedance Response
The 8FHM is a high efficiency, (91 dB 1watt / 1
meter) 8-inch mid-woofer with incredibly linear frequency
response characteristics and ultra low harmonic distortion
artifacts. The 8FHM uses a lightweight 1k carbon fiber mate-
rial, assembled from both sides of Nomex honey-comb core.
This unique cone provides the ideal weight to strength ratio.
The rubber surround has been FEM modeled and optimized.
The honeycomb cone with high end 1k carbon fiber material
provides remarkable strength, while pushing the cone break-up
modes to high frequencies, significantly extending the working
range of the speaker.
The cone
The 8FHM cone is made using 1k carbon fiber hone-comb,
placed from both sides of Nomex core, while the dustcap is
made off hard-anodization reinforced aluminum. The dustcap
shape and the hard anodizing are further improving the high
frequency behavior.
200 watts 91 dB 45 Hz 30 Hz - 5,000 Hz 1.4” CCAW Carbon F. honeycomb/ Rubber Ferrite
8FHM
APPLICATION:
• Ideal for sealed or vented two-way and multi-way high quality
audio designs. Example: studio monitors or hi-fi products.
Ordering code: 8FHM-091 Ferrite Mid-Woofer
30. 6FHM
General Specifications
Nominal Diameter:
Rated Impedance:
Power Handling:
AES Power:
Power Compression @-10dB
Power Compression @-10dB
Power Compression @Max Power
Maximum Recommended Xover Freq.:
Recommended Enclosure Volume:
Cone Design:
Front Plate Thickness:
Winding Height:
Fs
Re
Sd
Qms
Qes
Qts
Vas
Mms
BL product (force factor)
Peak to peak displacement (mm)
Le (mH @1kHz)
Overall diameter
No. of mounting holes
Bolt circle diameter
Front mount baffle cutout dia.
Rear mount baffle cutout diameter
Total depth
Flange and gasket thickness
Net weight
Shipping weight
Packing Dimensions
152 mm (6 in.)
4 ohm
40 Watts
0.5dB
1.0dB
1.8dB
4,000 Hz
10 - 35 Liters
Exp. Gmtry, 1k CF honeycomb
6 mm
15 mm
45 Hz
3.6 Ohm
132.7 cm2
(20.57 in.2
)
15
0.31
0.3
22 Liters
16 g
7.3 Tm
17
0.4
181.5 mm ( 7.17 in.)
6
169.5 mm (6.67 in.)
151mm (5.95 in.)Nominal
148 mm ( 5.83 in.)Nominal
89 mm (3.5 in.)
5 mm ( 0.2 in.)
2.4 kg (5.3 lbs.)
2.8 kg (6.17 lbs.)
200x200x110mm (7.9x7.9x4.3 in.)
Cont. Power | Sens. | Fs | Freq. Range | VC Dia. | VC Wire | Cone/Surround/Dome | Magnet type |
181.50
6-
4.50
169.50
92.30
151
53.70
Frequency Response
Level
SPL
Frequency (Hz)
100
60
40
80
20 50 100 200 2k
20
90
70
50
30
10
5k 10k 20k1k500
Level
Ohm
Frequency (Hz)
80
20
0
2 5 20 50 100 500 1k 2k
40
60
100
100
140
10 200 5k 10k 20k
Frequency response measurement with transducer
mounted in a 25 liter vented enclosure tuned to 35Hz
Impedance Response
Ordering code: 6FHM-152
APPLICATION:
• Ideal for sealed or vented two-way and multi-way high quality
audio designs. Example: studio monitors or hi-fi products.
The 6FHM is a high efficiency, (91 dB 1watt / 1 meter)
6-inch mid-woofer with incredibly linear frequency response
characteristics and ultra low harmonic distortion artifacts. The
6FHM uses a lightweight 1k carbon fiber material, assembled
from both sides of Nomex honey-comb core. This unique cone
provides the ideal weight to strength ratio. The rubber surround
has been FEM modeled and optimized. The honeycomb cone
with high end 1k carbon fiber material provides remarkable
strength, while pushing the cone break-up modes to high
frequencies, significantly extending the working range of the
speaker.
The cone
The 6FHM cone is made using 1k carbon fiber hone-comb,
placed from both sides of Nomex core, while the dustcap is made
off hard-anodization reinforced aluminum. The dustcap shape
and the hard anodizing are further improving the high frequency
behavior.
Ferrite Mid-Woofer
80 watts 91 dB 45 Hz 30 Hz - 5,000 Hz 1.4” 1out CCAW-R Carbon F. honeycomb/ Rubber Ferrite
31. General Specifications
Nominal Diameter:
Rated Impedance:
Power Handling:
AES Power:
Power Compression @-10dB
Power Compression @-10dB
Power Compression @Max Power
Maximum Recommended Xover Freq.:
Recommended Enclosure Volume:
Cone Design:
Front Plate Thickness:
Winding Height:
Fs
Re
Sd
Qms
Qes
Qts
Vas
Mms
BL product (force factor)
Peak to peak displacement (mm)
Le (mH @1kHz)
Overall diameter
No. of mounting holes
Bolt circle diameter
Front mount baffle cutout dia.
Rear mount baffle cutout diameter
Total depth
Flange and gasket thickness
Net weight
Shipping weight
Packing Dimensions
152 mm (6 in.)
8 ohm
180 Watts
0.7dB
1.2dB
1.6dB
5,000 Hz
1 - 6 Liters
Curvilinear, paper
6 mm
15 mm, aluminum ribbon wire
125 Hz
7.1 Ohm
143 cm2
(22.17 in.2
)
5
0.37
0.35
3.7 Liters
9.3 g
12.8 Tm
8mm
0.51
162.0 mm ( 6.38 in.)
4
172.0 mm (6.77 in.)
145 mm (5.7 in.)Nominal
145 mm ( 5.7 in.)Nominal
60 mm (2.36 in.)
0.7 mm ( 0.03 in.)
1.2 kg
1.3 kg
17x17x8cm (6.7x6.6.7x3.15 in.)
186
±0.30
162 ±0.30
172 ±0.20
90±0.20
145±0.30
52.50 ±0.30
61 ±0.30
0.70
Cont. Power | Sens. | Fs | Freq. Range | VC Dia. | VC Wire | Cone/Surround/Dome | Magnet type
Level
Ohm
Frequency (Hz)
80
20
0
2 5 20 50 100 500 1k 2k
40
60
100
120
140
10 200 5k 10k 20k
Frequency Response
Impedance Response
Frequency response measurement with transducer
mounted in a 2 liter sealed enclosure
Level
SPL
Frequency (Hz)
100
60
40
80
20 50 100 200 2k
20
90
70
50
30
10
5k 10k 20k1k500
The 6NPM is a very high efficiency, (101.8 dB 1watt
/ 1 meter) 6-inch midrange speaker with incredibly linear
frequency response characteristics and ultra low harmonic dis-
tortion artifacts. The 6NPM has extremely high sound quality.
The 6NPM uses a lightweight paper pulp, specifically developed
for this application. This unique cone provides the ideal weight
to strength ratio.
Voice Coil
At the core of the 6NPM is it’s voice coil technology featuring
edge wounded aluminum ribbon wire. Unique lightweight and
very short former provides the ideal transfer of power between
the voice coil and the cone assembly and assists in reducing the
distortion artifacts. By combining this material with the state of
the art adhesives, the 6FPM delivers incredible performance.
The neodymium magnet is in a direct contact with the CNC
exposed aluminum section of the basket, hold in place by our
thermal transfer adhesives. This design dramatically improves
the heat transfer.
240 watts 101.8 dB 125 Hz 180 Hz - 8,000 Hz 1.77” CCAR Paper / Fabric Neodymium
6NPM
APPLICATION:
• Ideal for professional audio system as mid-range, high sensitivity
unit. Examples include 3 way systems and line-array designs.
Ordering code: 6NPM-164 Neodymium Midrange
32. 35FR
General Specifications
Nominal Diameter:
Rated Impedance:
Power Handling:
AES Power:
Power Compression @-10dB
Power Compression @-10dB
Power Compression @Max Power
Maximum Recommended Xover Freq.:
Recommended Enclosure Volume:
Cone Design:
Front Plate Thickness:
Winding Height:
Fs
Re
Sd
Qms
Qes
Qts
Vas
Mms
BL product (force factor)
Peak to peak displacement (mm)
Le (mH @1kHz)
Overall diameter
No. of mounting holes
Bolt circle diameter
Front mount baffle cutout dia.
Rear mount baffle cutout diameter
Total depth
Flange and gasket thickness
Net weight
Shipping weight
Packing Dimensions
76 mm (3 in.)
4 ohm
25 Watts
0.6dB
0.95dB
1.8dB
2,800 Hz
0.6 - 2.5 Liters
Str. Gmtry, paper
8 mm
7 mm
70 Hz
3.5 Ohm
38.5 cm2
(5.97 in.2
)
4.3
0.43
0.39
2.0 Liters
7.3 g
5.4 Tm
12 mm
0.43
93 mm ( 3.66 in.)
4
101 mm (3.98 in.)
86.5 mm (3.41 in.) Nominal
88 mm (3.46 in.) Nominal
58 mm (2.28 in.)
1 mm ( 0.04 in.)
0.85 kg (1.87 lbs.)
--Industrially packed--
--Industrially packed--
Cont. Power | Sens. | Fs | Freq. Range | VC Dia. | VC Wire | Cone/Surround/Dome | Magnet type |
Level
Ohm
Frequency (Hz)
30
10
0
20 50 100 200 1k 2k
15
25
35
40
500 5k 10k 20k
25
5
1055
Impedance Response
Frequency Response
Level
SPL
Frequency (Hz)
90
60
20 50 100 200 2k
10
80
70
50
40
10k 20k5k1k500
20
30
Frequency response measurement with mounted in
sealed 1.5 liter enclosure tuned to 90Hz
93
93
101
85
49.20
86.50
57.80
3.60
Ordering code: 35FR-155
APPLICATION:
• Ideal for use in closed, vent port or passive-radiator applications
where the full range of frequency response is desired. 35FR is de-
signed to work well in multi-source array applications.
The 35FR is a high efficiency, (84dB 1watt / 1 meter)
3.5-inch full range speaker with linear frequency response char-
acteristics and high power handling capability while generating
low harmonic distortion artifacts. The 35FR uses a lightweight
exponential paper pulp pressed cone assembly along with a
NBR single roll geometry surround. The combination provides
remarkable strength, high efficiency and sustained output under
extreme conditions.
Magnetic circuit design
REDCATT engineers have developed ferrite based magnetic
circuit, capable of delivering the highest level of performance,
providing a consistent, high integrity magnetic flux gap, low dis-
tortion characteristic. The magnetic circuit design is optimized
to generate the minimum amount of flux modulation, providing
exceptional stability. Copper demodulation cup is assembled over
the t-pole.
Ferrite Full Range
50 watts 84 dB 70 Hz 60 Hz - 20,000 Hz 1.0” 1out Copper Paper / Rubber Ferrite
33. General Specifications
Nominal Diameter:
Rated Impedance:
Power Handling:
AES Power:
Power Compression @-10dB
Power Compression @-10dB
Power Compression @Max Power
Maximum Recommended Xover Freq.:
Recommended Enclosure Volume:
Cone Design:
Front Plate Thickness:
Winding Height:
Fs
Re
Sd
Qms
Qes
Qts
Vas
Mms
BL product (force factor)
Peak to peak displacement (mm)
Le (mH @1kHz)
Overall diameter
No. of mounting holes
Bolt circle diameter
Front mount baffle cutout dia.
Rear mount baffle cutout diameter
Total depth
Flange and gasket thickness
Net weight
Shipping weight
Packing Dimensions
76 mm (3 in.)
8 ohm
25 Watts
0.5dB
1.4dB
2.3dB
--- N/A ---
0.5 - 2 Liters
Exp. Geometry, paper
4 mm
5.7 mm
131 Hz
5.68 Ohm
28.3 cm2
(4.39 in.2
)
4.1
0.58
0.51
0.61Liters
2.7 g
4.7 Tm
14 mm
0.47
79 mm ( 2.71 in.)
4
86 mm (3.4 in.)
72 mm (2.84 in.) Nominal
77.55 mm (3.06 in.) Nominal
48 mm (1.89 in.)
4 mm ( 0.16 in.)
0.55 kg (1.21 lbs.)
0.8 kg (1.76 lbs.)
10x10x8 cm (0.4x0.4x0.32 in.)
79 ±0.20
86±0.20
77±0.20
70±0.20
22 ±0.20
46.90 ±0.20
Cont. Power | Sens. | Fs | Freq. Range | VC Dia. | VC Wire | Cone/Surround/Dome | Magnet type
Level
Ohm
Frequency (Hz)
25
10
0
20 50 100 200 1k 2k
15
20
30
35
500 5k 10k 20k
Impedance Response
Frequency Response
Level
SPL
Frequency (Hz)
100
85
20 50 100 200 2k
75
95
90
80
75
10k 20k5k1k500
Frequency response measurement with transducer
mounted on large baffle
The 30FF is a high efficiency, (86dB 1watt / 1 meter) 3-inch
full range speaker with linear frequency response character-
istics and high power handling capability while generating
low harmonic distortion artifacts. The 30FF uses a lightweight
exponential pressed cone assembly along with a NBR single
roll geometry surround. The combination provides remarkable
strength, high efficiency and sustained output under extreme
conditions.
Power Handling
At the core of the 30FF is it’s voice coil technology featuring a
Kapton former material capable of withstanding peak tempera-
tures in excess of 240C, well beyond the thermal requirements
of modern professional audio systems and providing optimal
structural strength and thermal characteristics. Former strength
provides the ideal transfer of power between the voice coil and
the cone assembly and assists in reducing distortion artifacts.
By combining this material with state of the art adhesives and
our winding voice coil technology, the 30FF delivers very high
performance.
50 watts 86 dB 131 Hz 100 Hz - 20,000 Hz 0.8” CCAW Paper / Rubber Ferrite
30FF
APPLICATION:
• Ideal for use in closed, vent port or passive-radiator applications where the
full range of frequency response is desired. 30FF is designed to work well in
multi-source array applications.
Ordering code: 30FF-047 Ferrite Full Range
34. 25FR
General Specifications
Nominal Diameter:
Rated Impedance:
Power Handling:
AES Power:
Power Compression @-10dB
Power Compression @-10dB
Power Compression @Max Power
Maximum Recommended Xover Freq.:
Recommended Enclosure Volume:
Cone Design:
Front Plate Thickness:
Winding Height:
Fs
Re
Sd
Qms
Qes
Qts
Vas
Mms
BL product (force factor)
Peak to peak displacement (mm)
Le (mH @1kHz)
Overall diameter
No. of mounting holes
Bolt circle diameter
Front mount baffle cutout dia.
Rear mount baffle cutout diameter
Total depth
Flange and gasket thickness
Net weight
Shipping weight
Packing Dimensions
63 mm (2.5 in.)
4 ohm
20 Watts
0.4dB
0.9dB
1.8dB
N/A
0.4 - 1.5 Liters
Str. Gmtry, paper
3 mm
3 mm
96 Hz
3.5 Ohm
21.2 cm2
(3.3 in.2
)
3.53
0.47
0.41
0.9 Liters
1.95 g
3.0 Tm
8 mm
0.08
sq. 65.5 mm ( 2.58 in.)
4
sq. 54.45 mm (2.14 in.)
N/A
63 mm (2.48 in.) Nominal
43 mm (1.69 in.)
1 mm ( 0.04 in.)
0.25 kg (0.55 lbs.)
-- Industrially packed --
-- Industrially packed --
Cont. Power | Sens. | Fs | Freq. Range | VC Dia. | VC Wire | Cone/Surround/Dome | Magnet type |
Level
Ohm
Frequency (Hz)
30
10
0
20 50 100 200 1k 2k
15
25
35
40
500 5k 10k 20k
25
5
Impedance Response
Level
SPL
Frequency (Hz)
90
60
20 50 100 200 2k
10
80
70
50
40
10k 20k5k1k500
20
30
Frequency response measurement with mounted in
sealed 1.0 liter enclosure
65.50
69
65.50
54.45
54.45
4-
4
43.10
7.50
46
34
Frequency Response
Ordering code: 25FR-134
APPLICATION:
• Ideal for use in closed, vent port or passive-radiator applications
where the full range of frequency response is desired. 25FR is de-
signed to work well in multi-source array applications.
The 25FR is a high efficiency, (84dB 1watt / 1 meter)
2.5-inch full range speaker with extremely linear frequency re-
sponse characteristics and high power handling capability while
generating low harmonic distortion artifacts. The 35FR uses a
lightweight exponential paper pulp pressed cone assembly along
with a NBR single roll geometry surround. The combination pro-
vides remarkable strength, high efficiency and sustained output
under extreme conditions. Strong neodymium based magnetic
circuit generates very high and wide Bl in very small form factor.
Cone design
The 25FR cone and dust cap are made using an advanced
REDCATT pulp, developed specifically for this application. All
“soft” parts are bonded together using state of the art UV based
high temperature adhesives. The speaker cone is also treated to
withstand harsh environments and high humidity. Metal parts
in the speaker assembly are coated for extreme weatherization
protection.
Neodymium Full Range
40 watts 84 dB 96 Hz 120 Hz - 20,000 Hz 0.8” 1out CCAW Paper / Rubber Neodymium
35. THE HEART OF YOUR SOUND
PRECISION HIGH FREQUENCY
TRANSDUCERS
36. High Frequency Transducers:
REDCATT HF transducers shows the level of precision and care
we are giving to these products. From the design, through the
incoming quality inspections and final assembly. All steps and
quality assurance processes were implemented with aim to pro-
vide our users with the best in class HF transducers.
Components:
DOMES
A key component of the HF assembly is the compression driver
or tweeter dome. We do form all HF domes in house with un-
beatable level of consistency. At REDCATT we consider this step
one and we have designed a unique dome forming process that
incorporates PLC controlled forming techniques to ensure all
aspects of the structure are precisely monitored. By using a pro-
grammable logic control (PLC) based system, we can incorporate
excessively detailed process parameters including pre-heating
and forming temperature controls that are within 0.5°C at each
stage of forming. The control and timing of the individual form-
ing steps are precisely established depending on the dome type
and material used then stored and recalled from memory at the
appropriate time.
We have developed unique coating technology for compression
driver domes. This unique process, was developed to greatly
improve the power handling capabilities. Further details can be
found on our web page www.redcatt.net.
In Process Dome Quality Assurance
Domes are randomly sampled after the forming process and
taken for dimensional and physical parameter measurements. We
have fully implemented precise laser based 3D scanning metrolo-
gy equipment, capable of detecting even the smallest variation in
the dome shape. We are fully capable of measuring dome shapes
with a 0.002mm level of precision.
VOICE COILS
Majority of our compression drivers use edge wound aluminum
wires. The extensive usage of Polyimide former materials, spe-
cialty adhesives and high temperature wires allow us to push the
power handling of the HF transducers to the new heights, while
the voice coils are capable to handle temperatures exceeding
350°C. In many designs, we use bent former assemblies to further
increase the bonding force between the voice coil and the dome
and improve the transient response of the HF unit.
PHASE PLUGS
It takes a significant amount of engineering to design a high
frequency device but making thousands of consistent parts based
on the original design is an order of magnitude more challenging.
The level of precision required to maintain good level of con-
sistency unit to unit, batch to batch, put lot of pressure on the
overall precision of all used components for high frequency
devices. Our transducer and quality engineers spent countless
hours to ensure all critical components maintain the required
level of precision and that the manufacturing process are capable
to deliver such parts. One of the most critical component is phase
plug. In many designs, we have chosen aluminum style phase
37. plugs, CNC machined from the ground up. The level of precision
on these phase plugs can be hardly matched by other manufac-
tures.
In other designs, plastic phase plugs are used. Special-
ty injection molding machinery and molding techniques were
selected to maintain the required precision level.
All parts are measured on advanced metrology equip-
ment. Modern metrology equipment as 3D CMM, scanning
lasers, profiling lasers or 2.5D vision systems are deployed in our
manufacturing process to control all tolerances with unprece-
dented precision.
ADHESIVES
REDCATT uses the state of the art adhesives in all assembly
steps. We have developed unique dispensing techniques and
adopted the best quality practices top ensure all dispensed adhe-
sives have great level of consistency and precision.
The majority of used adhesives are UV Cured Adhesives. UV
based glues require a proper and well controlled curing process
to ensure high, consistent bond strength. Our UV curing cham-
bers are providing high output ultra violet light which is precisely
projected and controlled. All assembled parts are cured under
multi-directional UV lights and are rotated in the chambers to
prevent shadowing.
38. 075NCD
General Specifications
Exit Throat Diameter:
Rated Impedance:
Power Handling:
AES Power:
Program Power:
Sensitivity:
Frequency Range:
Minimum Recommended Xover Freq.:
Minimum Impedance:
Voice Coil Diameter:
Voice Coil Winding Wire Material:
Diaphragm:
Flux Density:
Magnetic Material:
Fs
19 mm (0.75 in.)
8 Ohm (or 16 ohm)
15 Watts
25 Watts
109 dB
2,000 Hz - 18,000 Hz
>2,500 Hz
7.32 Ohms at 25C
25.4mm (1.0 in.)
Edge Wound CCAW
Polyimide composite
1.65 T
Neodymium
2,300 Hz
Mounting Information
No. Of mounting holes
4x M4 Holes
Total depth
Total outside dimension
Net weight
4 holes mounting pattern
53 mm (14.64 in.) Dia.
33.95 mm (2.08 in.)
59.5 mm Dia.
0.17 kg (0.4 lbs.)
Cont. Power | Sens. | Fs | Freq. Range | VC Dia. | VC Wire | Cone/Surround/Dome | Magnet type |
Frequency Response
Impedance Response
Frequency response measurement with transducer
mounted on constant directivity horn
Impedance measured in free air without a horn
Ordering code: 075NCD-052
APPLICATION:
• Ideal for high output, high quality two-way and multiple way systems,
small line array systems, where small form factor is required
The 100FCD compression driver is a high performance, high
frequency device ideal for professional loudspeaker systems. The
driver’s ferrite based magnetic circuit provides a robust, high
force BL field, providing precision control of the Polyimide dia-
phragm assembly. The unit delivers the frequency response and
high power handling through 1.0inch exit throat.
Diaphragm Assembly
The driver features a 25mm Polyimide diaphragm formed as
single piece with Polyimide suspension.
The dome is carefully attached to a high temperature Kapton
voice coil former that withstands the long term power charac-
teristics typically seen in professional applications. The acoustic
output exits through a bullet phase plug and a 1.0 inch throat
aperture. Nominal sensitivity is 105.5 dB 1watt / 1 meter.
Compact, High Frequency Compression Driver
25 watts 109 dB 2,300 Hz 2,000 Hz - 18 kHz 25.4mm CCAW Polyimide Neodymium
39. General Specifications
Exit Throat Diameter:
Rated Impedance:
Power Handling:
AES Power:
Program Power:
Sensitivity:
Frequency Range:
Minimum Recommended Xover Freq.:
Minimum Impedance:
Voice Coil Diameter:
Voice Coil Winding Wire Material:
Diaphragm:
Flux Density:
Magnetic Material:
Fs
25.4 mm (1.0 in.)
8 Ohm
20 Watts
40 Watts
91.5 dB
1,000 Hz - 30,000 Hz
>1,500 Hz
7.8 Ohms at 25C
25.4mm (1.0 in.)
Edge Wound CCAW
Titanium Nitride
1.25 T
Ferrite
1,100 Hz
Mounting Information
No. Of mounting holes
4x dia 4.4mm holes
Total depth
Total outside dimension
Net weight
4 holes mounting pattern
108 mm Dia.
49 mm (1.93 in.)
122.5 x 97.5mm (4.83 x 3.85 in.)
0.6 kg (1.3 lbs.)
97.40
122.42
108
61.80
93.40
4x
4.40
MOUNTING
Cont. Power | Sens. | Fs | Freq. Range | VC Dia. | VC Wire | Cone/Surround/Dome | Magnet type
Frequency Response
Frequency response measurement with transducer
mounted on flat baffle
Impedance Response
Impedance measured in with a horn
Level
SPL
Frequency (Hz)
90
60
200 500 1k 5k
10
80
70
50
40
20k10k2k
20
30
30k
Level
Ohm
Frequency (Hz)
9.5
6.5
20 50 100 200 1k 2k
7.5
9
10.5
11
500 5k 10k 20k
8
6
10
8.5
7
1052
The 25TF tweeter has incredibly linear frequency response char-
acteristics, high power handling capability while generating ultra
low harmonic distortion artifacts.
The 25TF Dome utilizes REDCATT in-house unique titanium
coating technology. Nitride is extremely hard ceramic material.
We deposit the nitride from both sides of the titanium dome. The
coated dome has dramatically improved flexural rigidity (aka
stiffness), compared to the pure titanium dome. The coating has
dramatic effect onto the distortion artifacts. The 3rd harmonic
distortion stays bellow 0.05% in the working range. Extended
high frequency response without major dome breakup modes
and improved transient response are the other positive effects of
REDCATT Titanium-Nitride Domes.
The 25TF has implemented FEM tuned rear resonant chamber.
The chamber is improving the tweeter behavior at low frequen-
cies and further lowering the harmonic distortion. All tweeter
parts are bonded together using state of the art high temperature
adhesives. Metal parts in the tweeter assembly are coated for
extreme weatherization protection.
40 watts 91.5 dB 1,100 Hz 1,000 Hz - 30 kHz 25.4mm EW CCAW Titanium Nitride / EVA Ferrite
25TF
APPLICATION:
• Ideal for use in high quality audio applications where the extended
high frequency response and the ultra low distortion are desired. These
applications might be Hi-Fi audio, Studio monitors, either 2 way or
multi-way system designs
Ordering code: 25TF-065 High Frequency Tweeter
40. 100FCD
General Specifications
Exit Throat Diameter:
Rated Impedance:
Power Handling:
AES Power:
Program Power:
Sensitivity:
Frequency Range:
Minimum Recommended Xover Freq.:
Minimum Impedance:
Voice Coil Diameter:
Voice Coil Winding Wire Material:
Diaphragm:
Flux Density:
Magnetic Material:
Fs
25.4 mm (1.0 in.)
8 Ohm
18 Watts
36 Watts
105.5 dB
1,200 Hz - 18,000 Hz
>2,500 Hz
6.8 Ohms at 25C
25.4mm (1.0 in.)
CCAW
Polyimide composite
1.57 T
Ferrite
2,000 Hz
Mounting Information
No. Of mounting holes
2x M5 Holes
Total depth
Total outside dimension
Net weight
4 or 3 mounting pattern
95mm (3.74 in.) Dia.
43mm (1.69 in.)
78 x 78mm (3.1 x 3.1 in.) Dia.
0.6 kg (1.3 lbs.)
Cont. Power | Sens. | Fs | Freq. Range | VC Dia. | VC Wire | Cone/Surround/Dome | Magnet type |
Frequency Response
Impedance Response
Frequency response measurement with transducer
mounted on constant directivity horn
Impedance measured in free air without a horn
Level
SPL
Frequency (Hz)
110
90
80
30
20
10
500 1k 5k 10k 20k
100
70
40
50
60
2k
Level
Ohm
Frequency (Hz)
25
20
14
0
2 5 10 20 50 200 1k 2k 10k 20k
7
30
100 500 5k
Ordering code: 100FCD-100
APPLICATION:
• Ideal for high output, high quality two-way and multiple way systems,
small line array systems, where small form factor is required
The 100FCD compression driver is a high performance, high
frequency device ideal for professional loudspeaker systems. The
driver’s ferrite based magnetic circuit provides a robust, high
force BL field, providing precision control of the Polyimide dia-
phragm assembly. The unit delivers the frequency response and
high power handling through 1.0inch exit throat.
Diaphragm Assembly
The driver features a 25mm Polyimide diaphragm formed as
single piece with Polyimide suspension.
The dome is carefully attached to a high temperature Kapton
voice coil former that withstands the long term power charac-
teristics typically seen in professional applications. The acoustic
output exits through a bullet phase plug and a 1.0 inch throat
aperture. Nominal sensitivity is 105.5 dB 1watt / 1 meter.
Compact, High Frequency Compression Driver
36 watts 105.5 dB 1,900 Hz 1,200 Hz - 18 kHz 25.4mm CCAW Polyimide Ferrite
41. General Specifications
Exit Throat Diameter:
Rated Impedance:
Power Handling:
AES Power:
Program Power:
Sensitivity:
Frequency Range:
Minimum Recommended Xover Freq.:
Minimum Impedance:
Voice Coil Diameter:
Voice Coil Winding Wire Material:
Diaphragm:
Flux Density:
Magnetic Material:
Fs
25.4 mm (1.0 in.)
8 Ohm (or 16 Ohm)
20 Watts
40 Watts
110.5 dB
1,200 Hz - 20,000 Hz
>2,100 Hz
7.0 Ohms at 25C
25.4mm (1.0 in.)
Edge Wound CCAW
Polyimide composite
1.76 T
Ferrite
1,900 Hz
Mounting Information
No. Of mounting holes
2x M5 Holes
Total depth
Total outside dimension
Net weight
2 holes mounting pattern
76mm Dia.
54mm
85.0 mm Dia.
0.6 kg (1.3 lbs.)
105
87.50
76
2xM5 Nuts
54
85
Cont. Power | Sens. | Fs | Freq. Range | VC Dia. | VC Wire | Cone/Surround/Dome | Magnet type
Frequency Response
Frequency response measurement with transducer
mounted on constant directivity horn
Impedance Response
Impedance measured in with a horn
Level
SPL
Frequency (Hz)
100
50
40
30
500 700 1k 2k 5k 10k 15k
110
90
60
70
80
3k
120
20k
Level
Ohm
Frequency (Hz)
15
12
9
0
2 5 10 20 50 200 1k 2k 10k 20k
7
17
100 500 5k
8
10
11
6
5
16
14
13
18
The 101FCD compression driver is a very high performance
high frequency device ideal for professional loudspeaker systems.
The driver’s ferrite based magnetic circuit provides a robust, high
force BL field, providing precision control of the Polyimide dia-
phragm assembly. The unit delivers extended frequency response
and high power handling through 1.0inch exit throat.
Diaphragm Assembly
The driver features a 37mm Polyimide diaphragm formed as
single piece with Polyimide suspension that consists resonance
control features lowering harmonic distortion at low frequencies.
The dome is carefully attached to a high temperature Nomex
voice coil former that withstands the long term power charac-
teristics typically seen in professional applications. The acoustic
output exits through a bullet phase plug and a 1.0 inch throat
aperture. Nominal sensitivity is 110.5 dB 1watt / 1 meter.
REDCATT uses state of the art adhesives in all assembly steps.
Our voice coil to dome bonding is unique process, developed
to greatly improve the power handling capabilities. REDCATT
unique and precise adhesives dispensing, combined with our in-
house developed dome treatments are further improving the long
term reliability of this product.
40 watts 110.5 dB 1,900 Hz 1,020 Hz - 18 kHz 35.5mm EW CCAW Polyimide Ferrite
101FCD
APPLICATION:
• Ideal for high output, high quality two-way and multiple way systems,
small line array systems, where small form factor is required
Ordering code: 101FCD-159 High Frequency Compression Driver
42. 101NCD
General Specifications
Exit Throat Diameter:
Rated Impedance:
Power Handling:
AES Power:
Program Power:
Sensitivity:
Frequency Range:
Minimum Recommended Xover Freq.:
Minimum Impedance:
Voice Coil Diameter:
Voice Coil Winding Wire Material:
Diaphragm:
Flux Density:
Magnetic Material:
Fs
25.4 mm (1.0 in.)
8 Ohm (or 16 Ohm)
20 Watts
40 Watts
111.5 dB
1,200 Hz - 20,000 Hz
>2,100 Hz
5.8 Ohms at 25C
25.4mm (1.0 in.)
Edge Wound CCAW
Polyimide composite
1.85 T
Neodymium
1,900 Hz
Mounting Information
No. Of mounting holes
2x M5 Holes
Total depth
Total outside dimension
Net weight
2 mounting pattern
53mm (2.09 in.) Dia.
37mm (1.46 in.)
64mm (2.52 in.) Dia.
0.6 kg (1.3 lbs.)
Cont. Power | Sens. | Fs | Freq. Range | VC Dia. | VC Wire | Cone/Surround/Dome | Magnet type |
Frequency Response
Impedance Response
Frequency response measurement with transducer
mounted on constant directivity horn
Impedance measured in with a horn
Level
SPL
Frequency (Hz)
100
50
40
30
500 700 1k 2k 5k 10k 15k
110
90
60
70
80
3k
120
20k
Level
Ohm
Frequency (Hz)
15
12
9
0
2 5 10 20 50 200 1k 2k 10k 20k
7
17
100 500 5k
8
10
11
6
5
16
14
13
18
86
53
64
2-M5 Nuts
37.50
64
Ordering code: 101NCD-160
APPLICATION:
• Ideal for high output, high quality two-way and multiple way systems,
small line array systems, where very small form factor is required
The 101NCD compression driver is a very high per-
formance high frequency device ideal for professional loud-
speaker systems. The driver’s neodymium based magnetic circuit
provides a robust, high force BL field providing precision control
of the Polyimide diaphragm assembly. The unit delivers extended
frequency response and high power handling through 1.0inch
exit throat.
101NCD ultra compact design ensures the driver can
be used in enclosure designs where the space is very limited, such
as line array systems.
Diaphragm Assembly
The driver features a 25mm Polyimide diaphragm formed as
single piece with Polyimide suspension.
The dome is carefully attached to a high temperature Kapton
voice coil former that withstands the long term power charac-
teristics typically seen in professional applications. The acoustic
output exits through a bullet phase plug and a 1.0 inch throat
aperture. Nominal sensitivity is 108.5 dB 1watt / 1 meter.
Compact, High Frequency Compression Driver
40 watts 111.5 dB 1,900 Hz 1,200 Hz - 18 kHz 25.4mm CCAW Polyimide Ferrite
43. General Specifications
Exit Throat Diameter:
Rated Impedance:
Power Handling:
AES Power:
Program Power:
Sensitivity:
Frequency Range:
Minimum Recommended Xover Freq.:
Minimum Impedance:
Voice Coil Diameter:
Voice Coil Winding Wire Material:
Diaphragm:
Flux Density:
Magnetic Material:
Fs
25.4 mm (1.0 in.)
8 Ohm
40 Watts
70 Watts
110.5 dB
1,020 Hz - 18,000 Hz
>1500 Hz
7.1 Ohms at 25C
35.5mm (1.45 in.)
Edge Wound CCAW
Polyimide composite
1.75 T
Ferrite
1,020 Hz
Mounting Information
No. Of mounting holes
4x M4 Holes
Total depth
Total outside dimension
Net weight
4
76mm (3 in.) Dia.
48mm (1.9 in.)
100mm (3.95 in.) Dia.
0.99 kg (2.2 lbs.)
Cont. Power | Sens. | Fs | Freq. Range | VC Dia. | VC Wire | Cone/Surround/Dome | Magnet type
Frequency Response
The 140FCD compression driver is a very high performance
high frequency device ideal for professional loudspeaker systems.
The driver’s ferrite based magnetic circuit provides a robust, high
force BL field, providing precision control of the Polyimide dia-
phragm assembly. The unit delivers extended frequency response
and high power handling through 1.0inch exit throat. REDCATT
has developed unique motor system magnetic gap volume tun-
ing. This feature dramatically improves THD and improves the
transient response of the driver.
Diaphragm Assembly
The driver features a 36mm Polyimide diaphragm formed as
single piece with Polyimide suspension. The suspension has
designed and FEM optimized venting features to lover the har-
monic distortion.
The dome is carefully attached to a high temperature Nomex
voice coil former that withstands the long term power charac-
teristics typically seen in professional applications. The acoustic
output exits through a radial phase plug and a 1.3 inch throat
aperture. Nominal sensitivity is 110.5 dB 1watt / 1 meter.
REDCATT uses state of the art adhesives in all assembly steps.
Our voice coil to dome bonding is unique process, developed
to greatly improve the power handling capabilities. REDCATT
unique and precise adhesives dispensing, combined with our in-
house developed dome treatments are further improving the long
term reliability of this product.
Impedance Response
Frequency response measurement with transducer
mounted on constant directivity horn
Impedance measured in free air without a horn
Level
SPL
Frequency (Hz)
110
90
80
30
20
10
50 100 200 500 1k 5k 10k 20k 25k
100
70
40
50
60
2k
Level
Ohm
Frequency (Hz)
25
20
15
0
2 5 10 20 50 200 1k 2k 10k 20k
10
30
100 500 5k
70 watts 110.5 dB 1,020 Hz 1,000 Hz - 20 kHz 35.5mm EW CCAW Polyimide Ferrite
140FCD
APPLICATION:
• Ideal for high output, high quality two-way and multiple way systems,
compact line array systems
Ordering code: 140FCD-087 High Frequency Compression Driver
44. 140NCD
General Specifications
Exit Throat Diameter:
Rated Impedance:
Power Handling:
AES Power:
Program Power:
Sensitivity:
Frequency Range:
Minimum Recommended Xover Freq.:
Minimum Impedance:
Voice Coil Diameter:
Voice Coil Winding Wire Material:
Diaphragm:
Flux Density:
Magnetic Material:
Fs
25.4 mm (1.0 in.)
8 Ohm (or 16 Ohm)
40 Watts
70 Watts
110.5 dB
1,020 Hz - 20,000 Hz
>1500 Hz
7.1 Ohms at 25C
35.5mm (1.45 in.)
Edge Wound CCAW
Polyimide composite
1.80 T
Neodymium
1,040 Hz
Mounting Information
No. Of mounting holes
2x M5 Holes
Total depth
Total outside dimension
Net weight
4
76mm (3 in.) Dia.
49mm (1.9 in.)
70.6mm (2.8 in.) Dia
0.7 kg (1.54 lbs.)
Cont. Power | Sens. | Fs | Freq. Range | VC Dia. | VC Wire | Cone/Surround/Dome | Magnet type |
Frequency Response
Impedance Response
Frequency response measurement with transducer
mounted on constant directivity horn
Impedance measured in free air without a horn
Level
SPL
Frequency (Hz)
110
90
80
30
20
10
50 100 200 500 1k 5k 10k 20k 25k
100
70
40
50
60
2k
Level
Ohm
Frequency (Hz)
25
20
15
0
2 5 10 20 50 200 1k 2k 10k 20k
10
30
100 500 5k
Ordering code: 140NCD-077
APPLICATION:
• Ideal for high output, high quality two-way and multiple way systems,
line array systems, where very small form factor is required
The 140NCD compression driver is a high performance
high frequency device ideal for professional loudspeaker systems.
In a ultra compact size, the driver’s neodymium based magnetic
circuit provides a robust, high force BL field providing precision
control of the Polyimide diaphragm assembly. The unit delivers
extended frequency response and high power handling through
1.3inch exit throat. The suspension has designed and FEM
optimized venting features to lover the harmonic distortion. The
venting holes also improves the control over the dome move-
ments at low frequencies.
140NCD ultra compact design ensures the driver can
be used in enclosure designs where the space is very limited, such
as line array systems.
Magnetic Circuit Design
Redcatt has focused on designing an optimized neodymium
based magnetic circuit capable of delivering the highest level of
performance and value. The neodymium circuit is optimized to
generate the minimum amount of flux modulation providing
exceptional stability. This effort has resulted in a device that offers
uncompromised performance featuring high efficiency, excep-
tional transient response and controlled distortion characteris-
tics, all that in very compact size.
Compact, High Frequency Compression Driver
70 watts 110.5 dB 1,040 Hz 1,020 Hz - 20 kHz 35.5mm EW CCAW Polyimide Neodymium