Amigos les comparto información para realizar bafles. Mi carrera es muy versátil y no he probado varios de los aquí publicados. Pero si a alguien le llegara a realizar. Por favor envíeme su información de cual fue el resultado. Saludos
1. 1
Building an effective,
high performances, 2 way
15” loudspeaker system
Eighteen Sound
A division of A.E.B srl
Via dell'Industria 20 - 45025 Cavriago (Reggio Emilia)- Italy
A-PDF MERGER DEMO
2. 2
2 way 15” kit
•An effective, high performance and easy to build, two
way loudspeaker system for high performance in a
relatively compact and portable enclosure.
•An “already optimized” passive crossover network
greatly simplifies the system setup.
•The 15W700 woofer has been combined with the
ND1460 Neodymium Compression Driver, mounted on
a XT1464 horn in order to obtain a smooth frequency
response, precision directivity control and high power
handling.
•Unique 18 Sound Elliptical-Spheroidal waveguide
technology assures constant coverage at mid and high
frequency with precision and stability, and good array-
ability if used in multiple units.
•A crossover frequency set in the 1.5kHz range, yields
very good power handling and operation reliability
while not sacrificing directivity control and mid-range
sound quality.
•The 15ND830 woofer is the perfect option if
equivalent sonic performaces are required while
greatly reducing system weight as well.
4. 4
2 way 15” kit
•The enclosure should be made out of
Baltic birch plywood (15mm thick).
•The vents can be made with standard
PVC plumbing pipe connections with
internal diameter of 96mm, as described
at page 13.
•All the used bolts should be the M5 type
(5mm diameter), 35mm deep. “8.8” steel
type or better is strongly suggested.
•M5 T-Nuts are recommended to be used
in conjunction with M5 bolts.
•It’s strictly necessary to provide for
proper cabinet internal acoustical
damping with absorptive material.
•High density damping material, such as
Dacron or other synthetic fibers, is
required for best performance.
•The following example image show the
proper damping material disposition.
Internal view and damping disposition
18. 350
66.5110
187.5
228.5
235
85
220 x 22013°
22°
32°
10596.596.5
32.5
140
90
310
ciare my professional speaker
8
HT001 UNITÀ A TROMBA PER MEDIO ALTI
120
dB
110
90
80
70
20 50 100 200 500 1000 2000 5000 10000 20000 40000Hz
40
20
10
5
0hm
100
RISPOSTA IN FREQUENZA (2.83V/1m)
NOTE:
CARATTERISTICHE TECNICHE
Angolo di radiazione
Sensibilità (2,83V/1m)
Frequenza di taglio
Gamma utile
Materiale Box autocostruito
Spessore consigliato
2 π sterad
103 dB
300 Hz
600÷20000 Hz
Multistrato/MDF
20 mm
ACCESSORI
Vaschetta portaterminali
Connettori Speak-on
Cavo per collegamenti
Fonoisolante per cavi
Viti per fissaggio altoparlanti
YAC104
YAC515
CA0230T
YAC835
YAC246
PM 202
PU 470
PR 260
PF 203
COMPONENTI
COMPONENTI
Impedenza
Potenza massima
Potenza nominale
N°1 PM 202, N°1 PU 470, N°1 PR 260,
N°1 PF 202
8 Ω
300 W
150 W
19. Basreflex 15"
Inleiding:
De inhoud van de kast is 80 liter. De baspoorten zijn afgestemd op 45Hz. De weergave is strak door een
combinatie van een kleine behuizing en een luidspreker met een redelijk lage Qts. Door zijn geringe afmetingen is
de kast makkelijk te vervoeren. De kast is zo ontworpen dat de weergave strak midlaag tot laag is, zodat deze
beter te combineren is met deze 8"/1" topkast.
Luidsprekers:
De behuizing is speciaal ontwikkeld voor een B&C Speakers 15PZB40 luidspreker. Het is sterk aan te bevelen
om onder de afstemfrequentie van de poort een high pass filter te gebruiken. Dit voorkomt dat de 15" luidspreker
onder de resonantiefrequentie van de poort te grote uitslagen gaat maken.
Constructie:
De figuren hieronder zijn getekend voor gebruik van 25mm dik hout. Wanneer gebruik wordt gemaakt van 15mm
berken multiplex zijn extra verstevigingen noodzakelijk. Elke baspoort heeft een oppervlakte van 50cm˛ (vierkant
van 10x10cm gehalveerd) met een lengte van 33cm. Op de voorkant kan tegen de baspoorten een rooster
gemonteerd worden.
Tekeningen:
A-PDF MERGER DEMO
20.
21.
22. The ‘Fane Constructor Series’ of documents is intended
to provide guidance in the construction of loudspeaker
cabinets specifically optimised for Fane components. Each
enclosure has been designed and rigorously tested to
ensure optimum performance from the recommended
components. The construction guide and panel cutting lists
provide sufficient information to enable any moderately
experienced woodworker to build their own enclosures.
Alternatively, Fane Acoustics will be pleased to
recommend approved cabinet manufacturers. Designs for
other enclosures and drive unit combinations are
available on request.
2-Way Trapezoidal 12" Reflex Enclosure
Project
Fane Acoustics Ltd. Unit 1, Millshaw Park Avenue Millshaw Park Industrial Estate Leeds LS11 0LR, England
Tel: +44 (0) 113 277 8600 Fax: +44 (0) 113 277 8700 e-mail:info@fane-acoustics.com www.fane-acoustics.com
CONSTRUCTOR SERIES
• Colossus 12MB or
Crescendo 12MB
• CD150
• FH305
• Fane Crossover”
Cabinet Design for:
System Components
Low Frequency Unit Colossus 12MB Crescendo 12MB
High Frequency Unit CD150 CD150
High Frequency Horn FH305 FH305
Crossover Unit Constructor-X1 Constructor-X1
Predicted Performance
Frequency Response 55 Hz - 18 kHz (+/-3dB) 55 Hz - 18 kHz (+/-3dB)
Impedance 8Ω 8Ω
Average Sensitivity 1W/1M 98 dB 98 dB
Power Handling 450 Watts AES 300 Watts AES
Maximum Output Continuous/Peak 121/127dB 119/125dB
Technical data
23. 41
396
270
C"
A'
B'
4 HOLES 08.0
ON 318.0 PCD
270
73
5
600
201
C"
B"
A"
PORTTUBE
100mmI.D.
184
404
1120281.0
78
Front View
Fane Acoustics Ltd. Unit 1, Millshaw Park Avenue Millshaw Park Industrial Estate Leeds LS11 0LR, England
Tel: +44 (0) 113 277 8600 Fax: +44 (0) 113 277 8700 e-mail:info@fane-acoustics.com www.fane-acoustics.com
CONSTRUCTOR SERIES: 2-Way Trapezoidal 12" Reflex Enclosure
Fane Acoustics Ltd. operates a policy of continuous product development
and reserves the right to change specifications without notice.
386
18
18
18 18
60
18
10
78.75°
242 ref.
340 ref.
348 ref.
45
SIDE
PANEL
QTY 2
BACK
PANEL
QTY 1
600
242
600
394
600
FRONT
BAFFLE
QTY 1
348
TOP
+
BOTTOM
PANEL
QTY 2
235
404
396
11°
328
18
14
28
346
45
334
14
60
18
11°
11°
SIDE
PANEL
BRACE
QTY 2
FRONT
BAFFLE
BRACE
QTY 1
11°11°11°11°11°
11°
Section C’-C’
Section B’-B’Section A’-A’
Panel cutting guide
All dimensions are in millimetres
24. Fane Acoustics Ltd. Unit 1, Millshaw Park Avenue Millshaw Park Industrial Estate Leeds LS11 0LR, England
Tel: +44 (0) 113 277 8600 Fax: +44 (0) 113 277 8700 e-mail:info@fane-acoustics.com www.fane-acoustics.com
CONSTRUCTOR SERIES: 2-Way Trapezoidal 12" Reflex Enclosure
Fane Acoustics Ltd. operates a policy of continuous product development
and reserves the right to change specifications without notice.
Choice of timber
We recommend multi-layer 18mm Birch plywood as the best material
to withstand the rigours of intensive ‘life on the road’ or likely
exposure to damp conditions. Alternatively, 18mm Medium Density
Fibreboard (MDF) offers good acoustic properties with the advantage
of being less expensive ( although heavier ), and may be used where
the cabinet will be permanently installed in a dry environment. Both
materials accept any type of paint finish extremely well.
Construction technique
All joints should be totally airtight, liberally glued with PVA adhesive
and screwed at 200mm (8”) centres with 4.2mm or 4.8mm (No.8 or
No.10) x 50 mm (2”) self-tapping screws.
The bracing panels are designed to ensure rigidity of construction,
making the cabinet as free as possible from panel resonances caused
by the internal forces generated by the loudspeaker drive unit and
resulting in unwanted vibration and colouration of the sound. Again,
these joints should be glued and screwed using the same method.
Porting
The length of the ports as specified in the drawing should be strictly
adhered to. The cut-out size for the port is 100mm (4”). Plastic
drainpipe is ideal for this task, but as there could be slight variations
in pipe diameter we suggest the cut-out is made after purchasing.
The port when fitted should be airtight, which can be achieved by
sealing the joint with silicone sealant or polyurethane mastic.
Acoustic insulation
To aid panel damping and prevent internal reflections and standing
waves, all internal panels of the cabinet ( with the exception of the
front baffle ) should be lagged with acoustically absorptive material.
We recommend the use of acoustic foam wadding, glassfibre
insulation or rubber carpet underlay which should be glued, stapled
or tacked to the inside of the cabinet, taking care to ensure that port
tubes are not obstructed.
Crossover network
Both the Colossus 12MB and the Crescendo 12MB will give superb
performance when used with appropriately matched custom designed
passive crossover networks. The recommended Fane crossover
network for this design incorporates a substantial heatsink to protect
the HF unit from overload. All the crossover components should be
mounted as far away as practical from the magnets. Major damage to
both the crossover and drive units could result should the board
become loose during transit, therefore the crossover should be
mounted firmly to an inside wall of the cabinet, ideally secured using
self-tapping screws in screw cups to reduce the pressure exerted on
the circuit board, and spaced with rubber grommets between the
circuit board and cabinet wall. It must however be pointed out that
due to the high power handling capabilities of these drive units, some
users may wish to employ an active crossover in order to utilise the
full potential of these drivers.
Internal wiring
Wiring should be kept away from moving loudspeaker parts and
fastened to internal panelling to avoid buzzing. We encourage the use
of colour coded wiring to identify polarity (red for +ve and black
for -ve), and recommend carrying out a phase check before first
using the cabinet. This is achieved by applying the positive terminal
of a battery to the positive cabinet input which should result in the
speaker cone moving forwards if in phase (or by using a dedicated
polarity checker).
Drive unit fixing
The drive unit should be front mounted to the baffle using T-nuts and
fixing bolts, and is supplied with a length of self adhesive foam
sealing strip which should be fitted around the front edge of the
speaker cut-outs to guarantee airtight conditions.
Loudspeaker protection
The exposed front of all speaker drive units is of course vulnerable to
damage, necessitating some means of protection which must be
robust but acoustically transparent. Cloth/foam type grilles are
feasible for fixed cabinets, but a metal mesh grille is certainly the
preferred and superior option. It is recommended that a foam gasket
material is used between the wooden cabinet and the metal grille to
prevent any unwanted resonances.
Cabinet hardware
Handles, terminal panels, protective corners, pole mounting
accessories etc. are readily available from many different sources.
Fane Acoustics will be pleased to recommend approved suppliers of
all associated components.
Cabinet finishing
Cabinet finishing is largely a matter of personal preference and as
such, detail of this is omitted from the drawing. Generally cabinets
are either painted or covered in carpet or vinyl material. If a carpet
material is chosen it is recommended that a very dense tight pile
type is used and that metal corner protectors are fitted. Corner
protectors will have a defined radius that the edges of the cabinet
should be finished to. The cabinet shown on the first page of this
document has all the external edges routed with a 13mm radius and
coated in a hard wearing textured epoxy paint. A single top rear
mounted carrying handle has been fitted. There are various types of
handles and terminal panels available and again details of these have
been omitted. It is recommended that these be purchased and cut-
outs be made in an appropriate position in the panels before final
build. Be aware that handles and terminals are not necessarily
airtight, which will be detrimental to performance but can be easily
remedied using a silicone sealant or polyurethane mastic to
seal all joints.
Warning!
There are safety regulations regarding the installation of loudspeaker
systems. This document is intended as a guide to construct a
suitable acoustic enclosure for our components. Fane Acoustics can
hold no responsibility for the structural integrity of the finished
system. The system will be no stronger than the material it is made
from and the joinery techniques used to assemble it. Suspending the
finished system will require additional hanging hardware. There are
companies who specialise in the manufacture and correct use of this
hardware. They are experts and must be consulted if overhead
suspension of the finished system is intended.
Hints and Tips
38. Ø 282
350
40
245
165
50
310
350
160
Vb1
Vb2
ciare my professional speaker
BR013 UNITÀ PER BASSE FREQUENZE PUSH PULL BIREFLEX
YAC300
110
dB
100
90
80
70
60
20 50 100 200 500 1000 2000 5000 10000 20000 40000Hz
40
20
10
5
0hm
RISPOSTA IN FREQUENZA N°2 PW 330 IN PARALLELO (2.83V/1m)
NOTE: Collegamenti (schemi.pdf) CW 327, CW 328, PW 329, PW 330: 2A. Il volume risultante dalle dimensioni
interne box tiene conto dell’ingombro degli altoparlanti e di eventuali tubi di acccordo
CARATTERISTICHE TECNICHE
Sensibilità (2.83V/1m)
Dimensioni condotto di accordo
Volume netto Vb1
Frequenza accordo Vb1 Fb
Volume netto Vb2
Frequenza accordo Vb2 Fb
Gamma utile
Materiale Box autocostruito
Spessore consigliato
100 dB
350x50 mm
25 dm3
60 Hz
15 dm3
105 Hz
20÷150 Hz
Multistrato/MDF
25 mm
ACCESSORI
Materiale fonoassorbente
Vaschetta portaterminali
Connettori Speak-on
Cavo per collegamenti
Fonoisolante per cavi
Guarnizione sigillante
Viti per fissaggio altoparlanti
Angolari
YAC826
YAC104
YCD515
CA0230T
YAC835
YAC830
YAC248
YAC200
Maniglie
CW 327
CW 328
PW 329
PW 330
COMPONENTI
COMPONENTI
Impedenza
Potenza massima
Potenza nominale
N°2 CW 327
in serie
8 Ω
1600 W
800 W
N°2 PW 330
in parallelo
4 Ω
2000 W
1000 W
N°2 PW 329
in parallelo
4 Ω
1600 W
800 W
N°2 CW 328
in serie
8 Ω
2000 W
1000 W
39.
40.
41. Ø 350
Ø 390
70
70
500
70
70
Ø 94
280
345
345
70
280
7070
70
Ø 350
250
360
380
1250
500
225
380
110°
Ø 390
10
30
DR012 MONITOR DUE VIE REFLEX
1000 WATT
YAC248
YGP380
YGS
YAC300
120
dB
110
90
80
70
20 50 100 200 500 1000 2000 5000 10000 20000 40000Hz
40
20
10
5
0hm
100
RISPOSTA IN FREQUENZA (2.83V/1m)
NOTE: Il volume risultante dalle dimensioni interne box tiene conto dell’ingombro degli altoparlanti e di
eventuali tubi di accordo.
CARATTERISTICHE TECNICHE
Sensibilità (2.83V/1m)
Volume netto reflex Vb
ø tubo di accordo
Lunghezza tubo di accordo
Frequenza accordo Fb
Gamma utile
Materiale Box autocostruito
Spessore consigliato
106 dB
160 dm3
4x 94 mm
25 mm
52 Hz
60÷20000 Hz
Multistrato/MDF
25 mm
ACCESSORI
Materiale fonoassorbente
Vaschetta portaterminali
Connettori Speak-on
Cavo per collegamenti
Fonoisolante per cavi
Guarnizione sigillante
Viti per fissaggio altoparlanti
Insert screw nut
YAC824
YAC104
YCD515
CA0230T
YAC835
YAC830
YAC240
YAC225
Viti per fissaggio tromba
Griglia per woofer
Staffe per griglia
Maniglie
PW 390
PU 720
PR 400
Filtro autocostruito
COMPONENTI
0,8 mH
27 µF
6,8 µF
0,8 mH
+
2 x PW 390 in parallelo PU 720 + PR 400
+
5,2 Ω
27 µF
+
-
+
SCHEMA PER AUTOCOSTRUZIONE FILTRO
COMPONENTI
Impedenza
Potenza massima
Potenza nominale
N°2 PW 390, N°1 PU 720, N°1 PR 400
4+8 Ω
1000 W
500 W
ciare my professional speaker
42. 500
300
Ø 416
250
Ø 94
7070
70
160
360
340
850
30
10
Ø 462
ciare my professional speaker
DR020 MONITOR DUE VIE REFLEX
800 WATT
YAC248
YGP450
YGS
YAC200/205
YAC300
120
dB
110
90
80
70
20 50 100 200 500 1000 2000 5000 10000 20000 40000Hz
40
20
10
5
0hm
100
RISPOSTA IN FREQUENZA (2.83V/1m)
NOTE: Il volume risultante dalle dimensioni interne box tiene conto dell’ingombro degli altoparlanti e di
eventuali tubi di accordo.
CARATTERISTICHE TECNICHE
Sensibilità (2.83V/1m)
Volume netto reflex Vb
ø tubo di accordo
Lunghezza tubo di accordo
Frequenza accordo Fb
Gamma utile
Materiale Box autocostruito
Spessore consigliato
102 dB
130 dm3
2x 94 mm
25 mm
47 Hz
60÷20000 Hz
Multistrato/MDF
25 mm
ACCESSORI
Materiale fonoassorbente
Vaschetta portaterminali
Connettori Speak-on
Cavo per collegamenti
Fonoisolante per cavi
Guarnizione sigillante
Viti per fissaggio altoparlanti
Insert screw nut
YAC824
YAC104
YCD515
CA0230T
YAC835
YAC830
YAC240
YAC225
Viti per fissaggio tromba
Griglia per woofer
Staffe per griglia
Angolari
Maniglie
PW 455
PU 720
PR 400
Filtro autocostruito
COMPONENTI
1,6 mH
12 µF
6,8 µF
0,8 mH
+
PW 455 PU 720+PR 400
+
10 Ω
+
22 µF
+
SCHEMA PER AUTOCOSTRUZIONE FILTRO
COMPONENTI
Impedenza
Potenza massima
Potenza nominale
N°1 PW 455, N°1 PU 720, N°1 PR 400
8 Ω
800 W
400 W
43. 640
760
405
510 ØAØB
686
416 180
30
ciare my professional speaker
MT001 UNITÀ A TROMBA PER MEDIO BASSI
YAC300
120
dB
110
90
80
70
20 50 100 200 500 1000 2000 5000 10000 20000 40000Hz
40
20
10
5
0hm
100
RISPOSTA IN FREQUENZA PW 330 (2.83V/1m)
NOTE: È consigliabile riempire l’intercapedine tra la tromba e le pareti interne del box con materiale fonoas-
sorbente. Foro ø A: 235mm per il PW 252 e CW 255. Foro ø B: 280mm per il PW 330 e CW 328.
CARATTERISTICHE TECNICHE
Angolo di radiazione
Sensibilità (2.83V/1m)
Frequenza di taglio
Gamma utile
Materiale Box autocostruito
Spessore consigliato
0,5 π sterad
106 dB
160 Hz
150÷1000 Hz
Multistrato/MDF
20 mm
ACCESSORI
Tubo di accordo
Materiale fonoassorbente
Terminali Speak-on
Cavo per collegamenti
Fonoisolante per cavi
Guarnizione sigillante
Viti per fissaggio woofer
Angolari
YAC416
YAC826
YCD510
CA0230T
YAC835
YAC830
YAC248
YAC200
Maniglie
PW 252
PW 330
CW 255
CW 328
PR 740
COMPONENTI
COMPONENTI
Impedenza
Potenza massima
Potenza nominale
N°1 PW 252
N°1 PR 740
8 Ω
300 W
150 W
N°1 CW 328
N°1 PR 740
4 Ω
1000 W
500 W
N°1 CW 255
N°1 PR 740
4 Ω
300 W
150 W
N°1 PW 330
N°1 PR 740
8 Ω
1000 W
500 W
44. Ø 280
474
474
B
140
140
A
252
140
474
B B1
A1
A
170 170
340
179
203
165°
72°
15+15
170
474
Sez. A - A1 ; B - B1
A B
MT010 UNITÀ A TROMBA PER MEDIO BASSI
YAC300
110
dB
100
90
80
70
60
20 50 100 200 500 1000 2000 5000 10000 20000 40000Hz
40
20
10
5
0hm
RISPOSTA IN FREQUENZA (2.83V/1m)
NOTE:
CARATTERISTICHE TECNICHE
Angolo di radiazione
Sensibilità (2.83V/1m)
Frequenza di taglio
Gamma utile
Materiale Box autocostruito
Spessore consigliato
4 π sterad
106 dB
200 Hz
200÷900 Hz
Multistrato/MDF
20 mm
ACCESSORI
Tubo di accordo
Materiale fonoassorbente
Terminali Speak-on
Cavo per collegamenti
Fonoisolante per cavi
Guarnizione sigillante
Viti per fissaggio woofer
Angolari
YAC416
YAC826
YCD510
CA0230T
YAC835
YAC830
YAC248
YAC200
Maniglie
CW 327
CW 328
PW 329
PW 330
COMPONENTI
COMPONENTI
Impedenza
Potenza massima
Potenza nominale
N°1 CW 327
4 Ω
800 W
400 W
N°1 PW 330
8 Ω
1000 W
500 W
N°1 PW 329
8 Ω
800 W
400 W
N°1 CW 328
4 Ω
1000 W
500 W
ciare my professional speaker
45. The ‘Fane Constructor Series’ of documents is intended
to provide guidance in the construction of loudspeaker
cabinets specifically optimised for Fane components. Each
enclosure has been designed and rigorously tested to
ensure optimum performance from the recommended
components. The construction guide and panel cutting lists
provide sufficient information to enable any moderately
experienced woodworker to build their own enclosures.
Alternatively, Fane Acoustics will be pleased to
recommend approved cabinet manufacturers. Designs for
other enclosures and drive unit combinations are
available on request.
2-Way Trapezoidal 15" Reflex Enclosure
Project
Fane Acoustics Ltd. Unit 1, Millshaw Park Avenue Millshaw Park Industrial Estate Leeds LS11 0LR, England
Tel: +44 (0) 113 277 8600 Fax: +44 (0) 113 277 8700 e-mail:info@fane-acoustics.com www.fane-acoustics.com
CONSTRUCTOR SERIES
• Colossus 15B-600 OR
• Colossus 15B
• CD.280
• FH.2450
• Fane Crossover
Cabinet Design for:
System Components
Low Frequency Unit Colossus 15B-600 Colossus 15B
High Frequency Unit CD.280 CD.280
High Frequency Horn FH.2450 FH.2450
Crossover Unit Constructor-X2 Constructor-X2
Predicted Performance
Frequency Response 45 Hz – 18kHz (+/- 3dB) 45 Hz – 18kHz (+/- 3dB)
Impedance 8 Ω 8 Ω
Average Sensitivity 1W/1M 99dB 98dB
Power Handling 600Watts (AES) 400Watts (AES)
Maximum Output: Continuous/Peak 123/129dB 121/127dB
Technical data
46. 4 HOLES
8.0 DIAM
ON 393.7 PCD
400
Y Y
X
X
74
743
342
274
45
205
779
205
482
PORT LENGTH 65
PORT DIAM 102
Ø352.0
274
Front View
Fane Acoustics Ltd. Unit 1, Millshaw Park Avenue Millshaw Park Industrial Estate Leeds LS11 0LR, England
Tel: +44 (0) 113 277 8600 Fax: +44 (0) 113 277 8700 e-mail:info@fane-acoustics.com www.fane-acoustics.com
CONSTRUCTOR SERIES: 2-Way Trapezoidal 15" Reflex Enclosure
Fane Acoustics Ltd. operates a policy of continuous product development
and reserves the right to change specifications without notice.
543
482 418
285
75°
18
18
10
743
490 295 491 543
285
743 743
482
250
418
15°15°
SIDE
PANEL
QTY 2
BACK
PANEL
QTY 1
TOP
+
BOTTOM
PANEL
QTY 2
FRONT
BAFFLE
QTY 1
INTERNAL
BRACE
QTY 1
15°15°
15°
15°
Section X-X
Section Y-Y
Panel cutting guide
All dimensions are in millimetres
47. Fane Acoustics Ltd. Unit 1, Millshaw Park Avenue Millshaw Park Industrial Estate Leeds LS11 0LR, England
Tel: +44 (0) 113 277 8600 Fax: +44 (0) 113 277 8700 e-mail:info@fane-acoustics.com www.fane-acoustics.com
CONSTRUCTOR SERIES: 2-Way Trapezoidal 15" Reflex Enclosure
Fane Acoustics Ltd. operates a policy of continuous product development
and reserves the right to change specifications without notice.
Choice of timber
We recommend multi-layer 18mm Birch plywood as the best material to
withstand the rigours of intensive ‘life on the road’ or likely exposure to
damp conditions. Alternatively, 18mm Medium Density Fibreboard (MDF)
offers good acoustic properties with the advantage of being less
expensive ( although heavier ), and may be used where the cabinet will
be permanently installed in a dry environment. Both materials accept any
type of paint finish extremely well.
Construction technique
All joints should be totally airtight, liberally glued with PVA adhesive and
screwed at 200mm (8”) centres with 4.2mm or 4.8mm (No.8 or
No.10) x 50 mm (2”) self-tapping screws.
The bracing panels are designed to ensure rigidity of construction,
making the cabinet as free as possible from panel resonances caused by
the internal forces generated by the loudspeaker drive unit and resulting
in unwanted vibration and colouration of the sound. Again, these joints
should be glued and screwed using the same method.
Porting
The length of the ports as specified in the drawing should be strictly
adhered to. The cut-out size for the port is 100mm (4”). Plastic
drainpipe is ideal for this task, but as there could be slight variations in
pipe diameter we suggest the cut-out is made after purchasing. The port
when fitted should be airtight, which can be achieved by sealing the joint
with silicone sealant or polyurethane mastic.
Acoustic insulation
To aid panel damping and prevent internal reflections and standing
waves, all internal panels of the cabinet ( with the exception of the front
baffle ) should be lagged with acoustically absorptive material.
We recommend the use of acoustic foam wadding, glassfibre insulation
or rubber carpet underlay which should be glued, stapled or tacked to
the inside of the cabinet, taking care to ensure that port tubes are not
obstructed.
Crossover network
Both the Colossus 15B-600 and the Colossus 15B will give superb
performance when used with appropriately matched custom designed
passive crossover networks. The recommended Fane crossover
network for this design incorporates a massive heatsink to protect
the HF unit from overload. All the crossover components should be
mounted as far away as practical from the magnets. Major damage to
both the crossover and drive units could result should the board become
loose during transit, therefore the crossover should be mounted firmly to
an inside wall of the cabinet, ideally secured using self-tapping screws in
screw cups to reduce the pressure exerted on the circuit board, and
spaced with rubber grommets between the circuit board and cabinet
wall. It must however be pointed out that due to the very high power
handling capabilities of these drive units, some users may wish to employ
an active crossover in order to utilise the full potential of these drivers.
Internal wiring
Wiring should be kept away from moving loudspeaker parts and fastened
to internal panelling to avoid buzzing. We encourage the use of colour
coded wiring to identify polarity (red for +ve and black for -ve), and
recommend carrying out a phase check before first using the cabinet.
This is achieved by applying the positive terminal of a battery to the
positive cabinet input which should result in the speaker cone moving
forwards if in phase (or by using a dedicated polarity checker).
Drive unit fixing
The drive unit should be front mounted to the baffle using T-nuts and
fixing bolts, and is supplied with a length of self adhesive foam
sealing strip which should be fitted around the front edge of the
speaker cut-outs to guarantee airtight conditions.
Loudspeaker protection
The exposed front of all speaker drive units is of course vulnerable to
damage, necessitating some means of protection which must be
robust but acoustically transparent. Cloth/foam type grilles are
feasible for fixed cabinets, but a metal mesh grille is certainly the
preferred and superior option. It is recommended that a foam gasket
material is used between the wooden cabinet and the metal grille to
prevent any unwanted resonances.
Cabinet hardware
Handles, terminal panels, protective corners, pole mounting
accessories etc. are readily available from many different sources.
Fane Acoustics will be pleased to recommend approved suppliers of
all associated components.
Cabinet finishing
Cabinet finishing is largely a matter of personal preference and as
such, detail of this is omitted from the drawing. Generally cabinets
are either painted or covered in carpet or vinyl material. If a carpet
material is chosen it is recommended that a very dense tight pile
type is used and that metal corner protectors are fitted. Corner
protectors will have a defined radius that the edges of the cabinet
should be finished to. The cabinet shown on the first page of this
document has all the external edges routed with a 13mm radius and
coated in a hard wearing textured epoxy paint. A single top rear
mounted carrying handle has been fitted. There are various types of
handles and terminal panels available and again details of these have
been omitted. It is recommended that these be purchased and cut-
outs be made in an appropriate position in the panels before final
build. Be aware that handles and terminals are not necessarily
airtight, which will be detrimental to performance but can be easily
remedied using a silicone sealant or polyurethane mastic to
seal all joints.
Warning!
There are safety regulations regarding the installation of loudspeaker
systems. This document is intended as a guide to construct a
suitable acoustic enclosure for our components. Fane Acoustics can
hold no responsibility for the structural integrity of the finished
system. The system will be no stronger than the material it is made
from and the joinery techniques used to assemble it. Suspending the
finished system will require additional hanging hardware. There are
companies who specialise in the manufacture and correct use of this
hardware. They are experts and must be consulted if overhead
suspension of the finished system is intended.
Hints and Tips
48.
49.
50.
51.
52. A L T O - F A L A N T E S
modificações sem prévio aviso.
reservamos-nos o direito de inserir
Devido aos avanços tecnológicos,
ELETRÔNICA SELENIUM S.A.
BR 386 Km 435 - CEP: 92.480-000
Nova Santa Rita - RS - Brasil
Tel.: (51) 479-4000 - Fax: (51) 479-1150
Atendimento Técnico 0800 51 4161
Atendimento Comercial 0800 51 4114
www.selenium.com.br
SELENIUM USA
USA
www.seleniumloudspeakers.com
SELENIUM EUROPE
Germany
www.seleniumloudspeakers.com
A L T O - F A L A N T E S
Vented-box
Modelo: VBT115A2
07/03 - Rev.: 00 - Página: 1/4
Dimensões em cm.
F:CAIXAS ACÚSTICASPROJETOSVBT115A2
A
A
B B
Corte A-A
50
44
73
80°
5116
69
73
44
34,5
Corte B-B
31,1
34,5
44,5
50
17
38
2
53. A L T O - F A L A N T E S
modificações sem prévio aviso.
reservamos-nos o direito de inserir
Devido aos avanços tecnológicos,
ELETRÔNICA SELENIUM S.A.
BR 386 Km 435 - CEP: 92.480-000
Nova Santa Rita - RS - Brasil
Tel.: (51) 479-4000 - Fax: (51) 479-1150
Atendimento Técnico 0800 51 4161
Atendimento Comercial 0800 51 4114
www.selenium.com.br
SELENIUM USA
USA
www.seleniumloudspeakers.com
SELENIUM EUROPE
Germany
www.seleniumloudspeakers.com
A L T O - F A L A N T E S
07/03 - Rev.: 00 - Página: 2/4
Relação de Componentes:
15PW5 woofer (1 peça)
D210Ti driver (1 peça)
HM25-25 corneta (1 peça)
Vented-box
Modelo: VBT115A2
F:CAIXAS ACÚSTICASPROJETOSVBT115A2
6
2
5
7
1
4
9
3
8
1 9
2
8
7
Caixa trapezoidal com duas vias, utilizando falante de
15" além de driver de titânio, cobrindo toda a faixa de
áudio. Pode ser usada em ambientes tais como auditórios,
igrejas e residências. O uso de crossover ativo (eletrônico)
é recomendado para um melhor desempenho. No entanto,
crossovers passivos, de boa qualidade, também podem ser
utilizados com sucesso.
54. A L T O - F A L A N T E S
modificações sem prévio aviso.
reservamos-nos o direito de inserir
Devido aos avanços tecnológicos,
ELETRÔNICA SELENIUM S.A.
BR 386 Km 435 - CEP: 92.480-000
Nova Santa Rita - RS - Brasil
Tel.: (51) 479-4000 - Fax: (51) 479-1150
Atendimento Técnico 0800 51 4161
Atendimento Comercial 0800 51 4114
www.selenium.com.br
SELENIUM USA
USA
www.seleniumloudspeakers.com
SELENIUM EUROPE
Germany
www.seleniumloudspeakers.com
A L T O - F A L A N T E S
07/03 - Rev.: 00 - Página: 3/4
Volume Interno (Líquido) da Câmara do Falante 15": 69 litros.
Fb: 51,5 Hz.
NOTAS:
Vented-box
Modelo: VBT115A2
F:CAIXAS ACÚSTICASPROJETOSVBT115A2
Ítem Qtde Descrição Material Notas
1 2 Base / Tampa Compensado 20 mm
2 2 Lateral Compensado 20 mm
3 1 Painel Frontal Compensado 20 mm
4 1 Divisória Compensado 20 mm
5 1 Fundo Compensado 20 mm
6 1 Painel Traseiro Compensado 20 mm
7 2 Moldura 1 Compensado 20 mm
8 2 Moldura 2 Compensado 20 mm
9 2 Duto Cano PVC diâmetro 100 mm
Inferior: 40 Hz.
Superior: 1.500 Hz.
Freqüências de Corte:
Falante 15":
Inferior: 1.500 Hz.Driver:
55. A L T O - F A L A N T E S
modificações sem prévio aviso.
reservamos-nos o direito de inserir
Devido aos avanços tecnológicos,
ELETRÔNICA SELENIUM S.A.
BR 386 Km 435 - CEP: 92.480-000
Nova Santa Rita - RS - Brasil
Tel.: (51) 479-4000 - Fax: (51) 479-1150
Atendimento Técnico 0800 51 4161
Atendimento Comercial 0800 51 4114
www.selenium.com.br
SELENIUM USA
USA
www.seleniumloudspeakers.com
SELENIUM EUROPE
Germany
www.seleniumloudspeakers.com
A L T O - F A L A N T E S
F:CAIXAS ACÚSTICASPROJETOSVBT115A2
07/03 - Rev.: 00 - Página: 4/4
Dimensões em cm.
Ítem 3
Qtde: 1 peça
Vented-box
Modelo: VBT115A2
30
15,5
10°
10°
45
69
10° 10°
45,2
28,28,5
35,2
Ø
7,5
45,2
30
10,0
2x Ø
31,8
10° 10°
2,0
2,0
10°
2,4
2,0
12
10° 10°
31,1
53
50
44,5
31,1
34,5
10° 10°
38
44
Ítem 2
Qtde: 2 peças
Ítem 5
Qtde: 1 peça
Ítem 1
Qtde: 2 peças
Ítem 4
Qtde: 1 peça
Ítem 6
Qtde: 1 peça
Ítem 7
Qtde: 2 peças
Ítem 8
Qtde: 2 peças
Ítem 9
Qtde: 2 peças
10,0
Ø
17
10,9 23,5
3,812,5
56. A L T O - F A L A N T E S
modificações sem prévio aviso.
reservamos-nos o direito de inserir
Devido aos avanços tecnológicos,
ELETRÔNICA SELENIUM S.A.
BR 386 Km 435 - CEP: 92.480-000
Nova Santa Rita - RS - Brasil
Tel.: (51) 479-4000 - Fax: (51) 479-1150
Atendimento Técnico 0800 51 4161
Atendimento Comercial 0800 51 4114
www.selenium.com.br
SELENIUM USA
USA
www.seleniumloudspeakers.com
SELENIUM EUROPE
Germany
www.seleniumloudspeakers.com
A L T O - F A L A N T E S
Vented-box
Modelo: VBT115B2
07/03 - Rev.: 00 - Página: 1/4
Dimensões em cm.
F:CAIXAS ACÚSTICASPROJETOSVBT115B2
A
A
B B
Corte A-A
50
44
7880°
5121
74
78
44
34,5
Corte B-B
31,1
34,5
44,5
50
38
10
2
57. A L T O - F A L A N T E S
modificações sem prévio aviso.
reservamos-nos o direito de inserir
Devido aos avanços tecnológicos,
ELETRÔNICA SELENIUM S.A.
BR 386 Km 435 - CEP: 92.480-000
Nova Santa Rita - RS - Brasil
Tel.: (51) 479-4000 - Fax: (51) 479-1150
Atendimento Técnico 0800 51 4161
Atendimento Comercial 0800 51 4114
www.selenium.com.br
SELENIUM USA
USA
www.seleniumloudspeakers.com
SELENIUM EUROPE
Germany
www.seleniumloudspeakers.com
A L T O - F A L A N T E S
07/03 - Rev.: 00 - Página: 2/4
Relação de Componentes:
WPU1505 ou WPU1507 woofer (1 peça)
D3300Ti DPD ou D3305Ti DPD
driver (1 peça)
Vented-box
Modelo: VBT115B2
F:CAIXAS ACÚSTICASPROJETOSVBT115B2
6
2
5
7
1
4
9
3
8
1
9
2
8
7
Caixa trapezoidal com duas vias, utilizando falante de
15" além de driver de titânio, cobrindo toda a faixa de
áudio. Pode ser usada em ambientes tais como auditórios,
igrejas e residências. O uso de crossover ativo (eletrônico)
é recomendado para um melhor desempenho. No entanto,
crossovers passivos, de boa qualidade, também podem ser
utilizados com sucesso.
HM3950-SLF corneta (1 peça)
58. A L T O - F A L A N T E S
modificações sem prévio aviso.
reservamos-nos o direito de inserir
Devido aos avanços tecnológicos,
ELETRÔNICA SELENIUM S.A.
BR 386 Km 435 - CEP: 92.480-000
Nova Santa Rita - RS - Brasil
Tel.: (51) 479-4000 - Fax: (51) 479-1150
Atendimento Técnico 0800 51 4161
Atendimento Comercial 0800 51 4114
www.selenium.com.br
SELENIUM USA
USA
www.seleniumloudspeakers.com
SELENIUM EUROPE
Germany
www.seleniumloudspeakers.com
A L T O - F A L A N T E S
07/03 - Rev.: 00 - Página: 3/4
Volume Interno (Líquido) da Câmara do Falante 15": 66 litros.
Fb: 50 Hz.
NOTAS:
Vented-box
Modelo: VBT115B2
F:CAIXAS ACÚSTICASPROJETOSVBT115B2
Ítem Qtde Descrição Material Notas
1 2 Base / Tampa Compensado 20 mm
2 2 Lateral Compensado 20 mm
3 1 Painel Frontal Compensado 20 mm
4 1 Divisória Compensado 20 mm
5 1 Fundo Compensado 20 mm
6 1 Painel Traseiro Compensado 20 mm
7 2 Moldura 1 Compensado 20 mm
8 2 Moldura 2 Compensado 20 mm
9 2 Duto Cano PVC diâmetro 75 mm
Inferior: 40 Hz.
Superior: 1.200 Hz.
Freqüências de Corte:
Falante 15":
Inferior: 1.200 Hz.Driver:
59. A L T O - F A L A N T E S
modificações sem prévio aviso.
reservamos-nos o direito de inserir
Devido aos avanços tecnológicos,
ELETRÔNICA SELENIUM S.A.
BR 386 Km 435 - CEP: 92.480-000
Nova Santa Rita - RS - Brasil
Tel.: (51) 479-4000 - Fax: (51) 479-1150
Atendimento Técnico 0800 51 4161
Atendimento Comercial 0800 51 4114
www.selenium.com.br
SELENIUM USA
USA
www.seleniumloudspeakers.com
SELENIUM EUROPE
Germany
www.seleniumloudspeakers.com
A L T O - F A L A N T E S
F:CAIXAS ACÚSTICASPROJETOSVBT115B2
07/03 - Rev.: 00 - Página: 4/4
Dimensões em cm.
Ítem 3
Qtde: 1 peça
Vented-box
Modelo: VBT115B2
30
20,5
10°
10°
45
74
10° 10°
45,2
28,28,5
35,1
Ø
7,5
45,2
307,5
2x Ø
3,5
6,1 33
17
31,8
10° 10°
2,0
2,0
10°
2,4
2,0
17
10° 10°
31,1
53
50
44,5
31,1
34,5
10° 10°
38
44
Ítem 2
Qtde: 2 peças
Ítem 5
Qtde: 1 peça
Ítem 1
Qtde: 2 peças
Ítem 4
Qtde: 1 peça
Ítem 6
Qtde: 1 peça
Ítem 7
Qtde: 2 peças
Ítem 8
Qtde: 2 peças
Ítem 9
Qtde: 2 peças
7,5
Ø
10
60. A L T O - F A L A N T E S
modificações sem prévio aviso.
reservamos-nos o direito de inserir
Devido aos avanços tecnológicos,
ELETRÔNICA SELENIUM S.A.
BR 386 Km 435 - CEP: 92.480-000
Nova Santa Rita - RS - Brasil
Tel.: (51) 479-4000 - Fax: (51) 479-1150
Atendimento Técnico 0800 51 4161
Atendimento Comercial 0800 51 4114
www.selenium.com.br
SELENIUM USA
USA
www.seleniumloudspeakers.com
SELENIUM EUROPE
Germany
www.seleniumloudspeakers.com
A L T O - F A L A N T E S
Vented-box
Modelo: VBT215A2
07/03 - Rev.: 00 - Página: 1/4
Dimensões em cm.
F:CAIXAS ACÚSTICASPROJETOSVBT215A2
A
A
BB
Corte A-A
Corte B-B
204040
71
108
25,6
29
54
54
71
108
29
80°
5,0
25
65
2
61. A L T O - F A L A N T E S
modificações sem prévio aviso.
reservamos-nos o direito de inserir
Devido aos avanços tecnológicos,
ELETRÔNICA SELENIUM S.A.
BR 386 Km 435 - CEP: 92.480-000
Nova Santa Rita - RS - Brasil
Tel.: (51) 479-4000 - Fax: (51) 479-1150
Atendimento Técnico 0800 51 4161
Atendimento Comercial 0800 51 4114
www.selenium.com.br
SELENIUM USA
USA
www.seleniumloudspeakers.com
SELENIUM EUROPE
Germany
www.seleniumloudspeakers.com
A L T O - F A L A N T E S
07/03 - Rev.: 00 - Página: 2/4
Relação de Componentes:
15PW3 woofer (2 peças)
D3300Ti DPD ou D3305Ti DPD
driver (1 peça)
Vented-box
Modelo: VBT215A2
F:CAIXAS ACÚSTICASPROJETOSVBT215A2
2
9
7
1
4
5
6
3
8
5
2
8
7
HM3950-SLF corneta (1 peça)
6
1
Caixa trapezoidal com duas vias, utilizando falantes de
15" além de driver de titânio, cobrindo toda a faixa de
áudio. Pode ser usada em ambientes tais como auditórios,
igrejas e residências. O uso de crossover ativo (eletrônico)
é recomendado para um melhor desempenho. No entanto,
crossovers passivos, de boa qualidade, também podem ser
utilizados com sucesso.
62. A L T O - F A L A N T E S
modificações sem prévio aviso.
reservamos-nos o direito de inserir
Devido aos avanços tecnológicos,
ELETRÔNICA SELENIUM S.A.
BR 386 Km 435 - CEP: 92.480-000
Nova Santa Rita - RS - Brasil
Tel.: (51) 479-4000 - Fax: (51) 479-1150
Atendimento Técnico 0800 51 4161
Atendimento Comercial 0800 51 4114
www.selenium.com.br
SELENIUM USA
USA
www.seleniumloudspeakers.com
SELENIUM EUROPE
Germany
www.seleniumloudspeakers.com
A L T O - F A L A N T E S
07/03 - Rev.: 00 - Página: 3/4
Volume Interno (Líquido) da Câmara do Falante 15": 86 litros.
Fb: 40Hz
NOTAS:
Vented-box
Modelo: VBT215A2
F:CAIXAS ACÚSTICASPROJETOSVBT215A2
Inferior: 40 Hz.
Superior: 1.200 Hz.
Freqüências de Corte:
Falante 15":
Driver:
Ítem Qtde Descrição Material Notas
1 2 Base / Tampa Compensado 20 mm
2 2 Lateral Compensado 20 mm
3 1 Painel Frontal Compensado 20 mm
4 1 Fundo Compensado 20 mm
5 2 Divisória Compensado 20 mm
6 2 Duto Compensado 20 mm
7 2 Moldura 1 Compensado 20 mm
8 2 Moldura 2 Compensado 20 mm
9 1 Painel Traseiro Compensado 20 mm
Inferior: 1.200 Hz.
63. A L T O - F A L A N T E S
modificações sem prévio aviso.
reservamos-nos o direito de inserir
Devido aos avanços tecnológicos,
ELETRÔNICA SELENIUM S.A.
BR 386 Km 435 - CEP: 92.480-000
Nova Santa Rita - RS - Brasil
Tel.: (51) 479-4000 - Fax: (51) 479-1150
Atendimento Técnico 0800 51 4161
Atendimento Comercial 0800 51 4114
www.selenium.com.br
SELENIUM USA
USA
www.seleniumloudspeakers.com
SELENIUM EUROPE
Germany
www.seleniumloudspeakers.com
A L T O - F A L A N T E S
F:CAIXAS ACÚSTICASPROJETOSVBT215A2
07/03 - Rev.: 00 - Página: 4/4
Dimensões em cm.
Ítem 3
Qtde: 1 peça
Vented-box
Modelo: VBT215A2
Ítem 2
Qtde: 2 peças
Ítem 4
Qtde: 1 peça
Ítem 1
Qtde: 2 peças
Ítem 5
Qtde: 2 peças
Ítem 6
Qtde: 2 peças
Ítem 7
Qtde: 2 peças
Ítem 8
Qtde: 2 peças
Ítem 9
Qtde: 1 peça
4084
25,6
10° 10°
10°
10°
72,4
104
35,2
Ø
35,2
Ø
21,1
10° 10°
49,2
40
4042
20
62
104
5,1
5,1
10°
71
29
54 48,5
25,6
10°
65
10°
10°
23,3
24,5
19,5
26,3
10° 10° 2,0
2,0
16
10°
2,4
2,0
33
17
8,1
2,5
64. A L T O - F A L A N T E S
modificações sem prévio aviso.
reservamos-nos o direito de inserir
Devido aos avanços tecnológicos,
ELETRÔNICA SELENIUM S.A.
BR 386 Km 435 - CEP: 92.480-000
Nova Santa Rita - RS - Brasil
Tel.: (51) 479-4000 - Fax: (51) 479-1150
Atendimento Técnico 0800 51 4161
Atendimento Comercial 0800 51 4114
www.selenium.com.br
SELENIUM USA
USA
www.seleniumloudspeakers.com
SELENIUM EUROPE
Germany
www.seleniumloudspeakers.com
A L T O - F A L A N T E S
Vented-box
Modelo: VBT215B2
07/03 - Rev.: 00 - Página: 1/4
Dimensões em cm.
F:CAIXAS ACÚSTICASPROJETOSVBT215B2
A
A
BB
Corte A-A
Corte B-B
164040
65
71
104
25,6
29
54
5
25
54
71
104
29
80°
2
65. A L T O - F A L A N T E S
modificações sem prévio aviso.
reservamos-nos o direito de inserir
Devido aos avanços tecnológicos,
ELETRÔNICA SELENIUM S.A.
BR 386 Km 435 - CEP: 92.480-000
Nova Santa Rita - RS - Brasil
Tel.: (51) 479-4000 - Fax: (51) 479-1150
Atendimento Técnico 0800 51 4161
Atendimento Comercial 0800 51 4114
www.selenium.com.br
SELENIUM USA
USA
www.seleniumloudspeakers.com
SELENIUM EUROPE
Germany
www.seleniumloudspeakers.com
A L T O - F A L A N T E S
07/03 - Rev.: 00 - Página: 2/4
Relação de Componentes:
15PW3 woofer (2 peças)
D210Ti driver (1 peça)
HM25-25 corneta (1 peça)
Vented-box
Modelo: VBT215B2
F:CAIXAS ACÚSTICASPROJETOSVBT215B2
2
9
7
1
4
5
6
3
8
5
2
8
7
Caixa trapezoidal com duas vias, utilizando falantes de
15" além de driver de titânio, cobrindo toda a faixa de
áudio. Pode ser usada em ambientes tais como auditórios,
igrejas e residências. O uso de crossover ativo (eletrônico)
é recomendado para um melhor desempenho. No entanto,
crossovers passivos, de boa qualidade, também podem ser
utilizados com sucesso.
1
6
66. A L T O - F A L A N T E S
modificações sem prévio aviso.
reservamos-nos o direito de inserir
Devido aos avanços tecnológicos,
ELETRÔNICA SELENIUM S.A.
BR 386 Km 435 - CEP: 92.480-000
Nova Santa Rita - RS - Brasil
Tel.: (51) 479-4000 - Fax: (51) 479-1150
Atendimento Técnico 0800 51 4161
Atendimento Comercial 0800 51 4114
www.selenium.com.br
SELENIUM USA
USA
www.seleniumloudspeakers.com
SELENIUM EUROPE
Germany
www.seleniumloudspeakers.com
A L T O - F A L A N T E S
07/03 - Rev.: 00 - Página: 3/4
Volume Interno (Líquido) da Câmara do Falante 15": 86 litros.
Fb: 40Hz
NOTAS:
Vented-box
Modelo: VBT215B2
F:CAIXAS ACÚSTICASPROJETOSVBT215B2
Inferior: 40 Hz.
Superior: 1.500 Hz.
Freqüências de Corte:
Falante 15":
Inferior: 1.500 Hz.Driver:
Ítem Qtde Descrição Material Notas
1 2 Base / Tampa Compensado 20 mm
2 2 Lateral Compensado 20 mm
3 1 Painel Frontal Compensado 20 mm
4 1 Fundo Compensado 20 mm
5 2 Divisória Compensado 20 mm
6 2 Duto Compensado 20 mm
7 2 Moldura 1 Compensado 20 mm
8 2 Moldura 2 Compensado 20 mm
9 1 Painel Traseiro Compensado 20 mm
67. A L T O - F A L A N T E S
modificações sem prévio aviso.
reservamos-nos o direito de inserir
Devido aos avanços tecnológicos,
ELETRÔNICA SELENIUM S.A.
BR 386 Km 435 - CEP: 92.480-000
Nova Santa Rita - RS - Brasil
Tel.: (51) 479-4000 - Fax: (51) 479-1150
Atendimento Técnico 0800 51 4161
Atendimento Comercial 0800 51 4114
www.selenium.com.br
SELENIUM USA
USA
www.seleniumloudspeakers.com
SELENIUM EUROPE
Germany
www.seleniumloudspeakers.com
A L T O - F A L A N T E S
F:CAIXAS ACÚSTICASPROJETOSVBT215B2
07/03 - Rev.: 00 - Página: 4/4
Dimensões em cm.
Ítem 3
Qtde: 1 peça
Vented-box
Modelo: VBT215B2
Ítem 2
Qtde: 2 peças
Ítem 4
Qtde: 1 peça
Ítem 1
Qtde: 2 peças
Ítem 5
Qtde: 2 peças
Ítem 6
Qtde: 2 peças
Ítem 7
Qtde: 2 peças
Ítem 8
Qtde: 2 peças
Ítem 9
Qtde: 1 peça
4084
25,6
10° 10°
10°
10°
72,4
100
35,2
Ø
35,2
Ø
23,5
12,5
12,9
3,8
21,1
10° 10°
49,2
40
4042
20
62
100
5,1
5,1
10°
71
29
54 48,5
25,6
10°
65
10°
10°
23,3
24,5
15,5
26,3
10° 10° 2,0
2,0
12
10°
2,4
2,0
68. A L T O - F A L A N T E S
modificações sem prévio aviso.
reservamos-nos o direito de inserir
Devido aos avanços tecnológicos,
ELETRÔNICA SELENIUM S.A.
BR 386 Km 435 - CEP: 92.480-000
Nova Santa Rita - RS - Brasil
Tel.: (51) 479-4000 - Fax: (51) 479-1150
Atendimento Técnico 0800 51 4161
Atendimento Comercial 0800 51 4114
www.selenium.com.br
SELENIUM USA
USA
www.seleniumloudspeakers.com
SELENIUM EUROPE
Germany
www.seleniumloudspeakers.com
A L T O - F A L A N T E S
Vented-box
Modelo: VBT1215A3
07/03 - Rev.: 00 - Página: 1/4
Dimensões em cm.
F:CAIXAS ACÚSTICASPROJETOSVBT1215A3
A
A
Corte A-A
BB
Corte B-B
50
80°
71
100
26
433217
100
22 2
71
22,6
26
50
40
44,6
69. A L T O - F A L A N T E S
modificações sem prévio aviso.
reservamos-nos o direito de inserir
Devido aos avanços tecnológicos,
ELETRÔNICA SELENIUM S.A.
BR 386 Km 435 - CEP: 92.480-000
Nova Santa Rita - RS - Brasil
Tel.: (51) 479-4000 - Fax: (51) 479-1150
Atendimento Técnico 0800 51 4161
Atendimento Comercial 0800 51 4114
www.selenium.com.br
SELENIUM USA
USA
www.seleniumloudspeakers.com
SELENIUM EUROPE
Germany
www.seleniumloudspeakers.com
A L T O - F A L A N T E S
07/03 - Rev.: 00 - Página: 2/4
Relação de Componentes:
15PW3 woofer (1 peça)
12PW3 woofer (1 peça)
D210Ti driver (1 peça)
F:CAIXAS ACÚSTICASPROJETOSVBT1215A3
HM25-25 corneta (1 peça)
Vented-box
Modelo: VBT1215A3
2
9
4
7
1
3
6
5
8
3
2
6
1
8
7
10
Caixa trapezoidal com três vias, utilizando falantes de
15 e 12" além de driver de titânio, cobrindo toda a faixa de
áudio. Pode ser usada em ambientes tais como auditórios,
igrejas e residências. O uso de crossover ativo (eletrônico)
é recomendado para um melhor desempenho. No entanto,
crossovers passivos, de boa qualidade, também podem ser
utilizados com sucesso.
70. A L T O - F A L A N T E S
modificações sem prévio aviso.
reservamos-nos o direito de inserir
Devido aos avanços tecnológicos,
ELETRÔNICA SELENIUM S.A.
BR 386 Km 435 - CEP: 92.480-000
Nova Santa Rita - RS - Brasil
Tel.: (51) 479-4000 - Fax: (51) 479-1150
Atendimento Técnico 0800 51 4161
Atendimento Comercial 0800 51 4114
www.selenium.com.br
SELENIUM USA
USA
www.seleniumloudspeakers.com
SELENIUM EUROPE
Germany
www.seleniumloudspeakers.com
A L T O - F A L A N T E S
07/03 - Rev.: 00 - Página: 3/4
Volume Interno (Líquido) da Câmara do Falante 15": 90 litros.
Fb: 40 Hz.
NOTAS:
F:CAIXAS ACÚSTICASPROJETOSVBT1215A3
Inferior: 40 Hz.
Superior: 150 Hz.
Freqüências de Corte:
Falante 15":
Inferior: 150 Hz.
Superior: 1.500 Hz.
Falante 12":
Vented-box
Modelo: VBT1215A3
Volume Interno (Líquido) da Câmara do Falante 12": 46 litros.
Inferior: 1.500 Hz.Driver:
Ítem Qtde Descrição Material Notas
1 2 Base/Tampa Compensado 20 mm
2 2 Lateral Compensado 20 mm
3 2 Divisória 1 Compensado 20 mm
4 1 Fundo Compensado 20 mm
5 1 Painel Frontal Compensado 20 mm
6 2 Duto Cano PVC diâmetro 100 mm
7 2 Moldura 1 Compensado 20 mm
8 2 Moldura 2 Compensado 20 mm
9 1 Painel Traseiro Compensado 20 mm
10 1 Divisória 2 Compensado 20 mm
71. A L T O - F A L A N T E S
modificações sem prévio aviso.
reservamos-nos o direito de inserir
Devido aos avanços tecnológicos,
ELETRÔNICA SELENIUM S.A.
BR 386 Km 435 - CEP: 92.480-000
Nova Santa Rita - RS - Brasil
Tel.: (51) 479-4000 - Fax: (51) 479-1150
Atendimento Técnico 0800 51 4161
Atendimento Comercial 0800 51 4114
www.selenium.com.br
SELENIUM USA
USA
www.seleniumloudspeakers.com
SELENIUM EUROPE
Germany
www.seleniumloudspeakers.com
A L T O - F A L A N T E S
F:CAIXAS ACÚSTICASPROJETOSVBT1215A3
07/03 - Rev.: 00 - Página: 4/4
Dimensões em cm.
Ítem 2
Qtde: 2 peças
Ítem 5
Qtde: 1 peça
Ítem 4
Qtde: 1 peça
Ítem 1
Qtde: 2 peças
Ítem 3
Qtde: 2 peças
Ítem 9
Qtde: 1 peça
Ítem 7
Qtde: 2 peças
Ítem 8
Qtde: 2 peças
Vented-box
Modelo: VBT1215A3
96
10°
10°
72,3
28,0
Ø
35,2
Ø
10
2xØ
12,52,8
5,32036
96
23,5
27
45,3
10° 10°
79
10° 10°
22,6
10° 10°
26
50
71
16,5
21,4
10
Ø
22
13 2
2,3
10°
23,3
10° 10°
2
2
Ítem 10
Qtde: 1 peça
44,6
22,6
10° 10°
32
10° 10°
31,1
Ítem 6
Qtde: 2 peças
72. A L T O - F A L A N T E S
modificações sem prévio aviso.
reservamos-nos o direito de inserir
Devido aos avanços tecnológicos,
ELETRÔNICA SELENIUM S.A.
BR 386 Km 435 - CEP: 92.480-000
Nova Santa Rita - RS - Brasil
Tel.: (51) 479-4000 - Fax: (51) 479-1150
Atendimento Técnico 0800 51 4161
Atendimento Comercial 0800 51 4114
www.selenium.com.br
SELENIUM USA
USA
www.seleniumloudspeakers.com
SELENIUM EUROPE
Germany
www.seleniumloudspeakers.com
A L T O - F A L A N T E S
Vented-box
Modelo: VBT1215B3
07/03 - Rev.: 00 - Página: 1/4
Dimensões em cm.
F:CAIXAS ACÚSTICASPROJETOSVBT1215B3
A
A
Corte A-A
BB
Corte B-B
50
80°
71
100
26
433217
100
17 2
71
22,6
26
50
40
12
44,6
73. A L T O - F A L A N T E S
modificações sem prévio aviso.
reservamos-nos o direito de inserir
Devido aos avanços tecnológicos,
ELETRÔNICA SELENIUM S.A.
BR 386 Km 435 - CEP: 92.480-000
Nova Santa Rita - RS - Brasil
Tel.: (51) 479-4000 - Fax: (51) 479-1150
Atendimento Técnico 0800 51 4161
Atendimento Comercial 0800 51 4114
www.selenium.com.br
SELENIUM USA
USA
www.seleniumloudspeakers.com
SELENIUM EUROPE
Germany
www.seleniumloudspeakers.com
A L T O - F A L A N T E S
07/03 - Rev.: 00 - Página: 2/4
Relação de Componentes:
15PW5 woofer (1 peça)
12PW5 woofer (1 peça)
D210Ti driver (1 peça)
Caixa trapezoidal com três vias, utilizando falantes de
15 e 12" além de driver de titânio, cobrindo toda a faixa de
áudio. Pode ser usada em ambientes tais como auditórios,
igrejas e residências. O uso de crossover ativo (eletrônico)
é recomendado para um melhor desempenho. No entanto,
crossovers passivos, de boa qualidade, também podem ser
F:CAIXAS ACÚSTICASPROJETOSVBT1215B3
HM25-25 corneta (1 peça)
Vented-box
Modelo: VBT1215B3
3
1
9
8
2
4
11
7
10
6
5
4
3
2
1
8
7 10
utilizados com sucesso.
74. A L T O - F A L A N T E S
modificações sem prévio aviso.
reservamos-nos o direito de inserir
Devido aos avanços tecnológicos,
ELETRÔNICA SELENIUM S.A.
BR 386 Km 435 - CEP: 92.480-000
Nova Santa Rita - RS - Brasil
Tel.: (51) 479-4000 - Fax: (51) 479-1150
Atendimento Técnico 0800 51 4161
Atendimento Comercial 0800 51 4114
www.selenium.com.br
SELENIUM USA
USA
www.seleniumloudspeakers.com
SELENIUM EUROPE
Germany
www.seleniumloudspeakers.com
A L T O - F A L A N T E S
07/03 - Rev.: 00 - Página: 3/4
Volume Interno (Líquido) da Câmara do Falante 15": 90 litros.
Fb: 42 Hz.
NOTAS:
F:CAIXAS ACÚSTICASPROJETOSVBT1215B3
Inferior: 40 Hz.
Superior: 150 Hz.
Freqüências de Corte:
Falante 15":
Inferior: 150 Hz.
Superior: 1.500 Hz.
Falante 12":
Vented-box
Modelo: VBT1215B3
Volume Interno (Líquido) da Câmara do Falante 12": 46 litros.
Fb: 55 Hz.
Inferior: 1.500 Hz.Driver:
Ítem Qtde Descrição Material Notas
1 2 Moldura 2 Compensado 20 mm
2 2 Base/Tampa Compensado 20 mm
3 2 Lateral Compensado 20 mm
4 2 Divisória 1 Compensado 20 mm
5 1 Fundo Compensado 20 mm
6 1 Painel Frontal Compensado 20 mm
7 2 Duto 1 Cano PVC diâmetro 100 mm
8 2 Moldura 1 Compensado 20 mm
9 1 Painel Traseiro Compensado 20 mm
10 2 Duto 2 Cano PVC diâmetro 75 mm
11 1 Divisória 2 Compensado 20 mm
75. A L T O - F A L A N T E S
modificações sem prévio aviso.
reservamos-nos o direito de inserir
Devido aos avanços tecnológicos,
ELETRÔNICA SELENIUM S.A.
BR 386 Km 435 - CEP: 92.480-000
Nova Santa Rita - RS - Brasil
Tel.: (51) 479-4000 - Fax: (51) 479-1150
Atendimento Técnico 0800 51 4161
Atendimento Comercial 0800 51 4114
www.selenium.com.br
SELENIUM USA
USA
www.seleniumloudspeakers.com
SELENIUM EUROPE
Germany
www.seleniumloudspeakers.com
A L T O - F A L A N T E S
F:CAIXAS ACÚSTICASPROJETOSVBT1215B3
07/03 - Rev.: 00 - Página: 4/4
Dimensões em cm.
Ítem 3
Qtde: 2 peças
Ítem 6
Qtde: 1 peça
Ítem 5
Qtde: 1 peça
Ítem 2
Qtde: 2 peças
Ítem 4
Qtde: 2 peças
Ítem 9
Qtde: 1 peça
Ítem 8
Qtde: 2 peças
Ítem 1
Qtde: 2 peças
Vented-box
Modelo: VBT1215B3
96
10°
10°
72,3
28,0
Ø
35,2
Ø
10
2xØ
12,52,8
5,320
96
23,5
27
45,3
10° 10°
79
10° 10°
22,6
10° 10°
26
50
71
16,5
21,4
10
Ø
17
13 2
2,3
10°
23,3
10° 10°
2
2
Ítem 11
Qtde: 1 peça
44,6
22,6
10° 10°
32
10° 10°
31,1
Ítem 7
Qtde: 2 peças
23,713,9
7,5
2xØ
7,5
Ø
12
Ítem 10
Qtde: 2 peças
76. A L T O - F A L A N T E S
modificações sem prévio aviso.
reservamos-nos o direito de inserir
Devido aos avanços tecnológicos,
ELETRÔNICA SELENIUM S.A.
BR 386 Km 435 - CEP: 92.480-000
Nova Santa Rita - RS - Brasil
Tel.: (51) 479-4000
Fax: (51) 479-1150
www.selenium.com.br
SELENIUM USA
USA
www.seleniumloudspeakers.com
SELENIUM EUROPE
Germany
www.seleniumloudspeakers.com
A L T O - F A L A N T E S
Side-fill
Modelo: SF-A2
F:CAIXAS ACÚSTICASSIDE-FILLSF-A2SF-A2
03/03 - Rev.: 01 - Página: 1/5
Dimensões em cm.
A
A
B B
Corte B-B
68,0
50,0
47,4
50,8
50,7
10°
50,0
125,0
50,8
68,0
80°
Corte A-A
40,0
6,5
61,9
14,3
50,0
6,0
20,0
50,040,0
121,0
125,0
24,0
29,4
31,4
27,0
77. A L T O - F A L A N T E S
modificações sem prévio aviso.
reservamos-nos o direito de inserir
Devido aos avanços tecnológicos,
ELETRÔNICA SELENIUM S.A.
BR 386 Km 435 - CEP: 92.480-000
Nova Santa Rita - RS - Brasil
Tel.: (51) 479-4000
Fax: (51) 479-1150
www.selenium.com.br
SELENIUM USA
USA
www.seleniumloudspeakers.com
SELENIUM EUROPE
Germany
www.seleniumloudspeakers.com
A L T O - F A L A N T E S
Side-fill
Modelo: SF-A2
F:CAIXAS ACÚSTICASSIDE-FILLSF-A2SF-A2
03/03 - Rev.: 01 - Página: 2/5
Relação de Componentes:
18SW1P subwoofer ou
WPU1805 ou WPU1807 woofer (1 peça)
2
7
1
4
5
6
3
6
1
2
D4400Ti ou D3300Ti DPD driver (1 peça)
HL14-50 corneta (1 peça)
WPU1505 ou WPU1507 woofer (1 peça)
8
3
9
1011
11
11
11
12
12
13
na sonorização de ambientes pequenos e médios.
Caixa três vias, para uso no palco, como side-fill ou
78. A L T O - F A L A N T E S
modificações sem prévio aviso.
reservamos-nos o direito de inserir
Devido aos avanços tecnológicos,
ELETRÔNICA SELENIUM S.A.
BR 386 Km 435 - CEP: 92.480-000
Nova Santa Rita - RS - Brasil
Tel.: (51) 479-4000
Fax: (51) 479-1150
www.selenium.com.br
SELENIUM USA
USA
www.seleniumloudspeakers.com
SELENIUM EUROPE
Germany
www.seleniumloudspeakers.com
A L T O - F A L A N T E S
Side-fill
Modelo: SF-A2
F:CAIXAS ACÚSTICASSIDE-FILLSF-A2SF-A2
03/03 - Rev.: 01 - Página: 3/5
Ítem Qtde Descrição Material Notas
1 2 Base/Tampa Compensado 20 mm
2 2 Lateral Compensado 20 mm
3 2 Divisória Compensado 20 mm
4 1 Painel 1 Compensado 20 mm
5 1 Moldura 1 Compensado 20 mm
6 2 Moldura 2 Compensado 20 mm
7 1 Fundo Compensado 20 mm
8 1 Painel 2 Compensado 20 mm
9 1 Painel 3 Compensado 20 mm
10 1 Moldura 3 Compensado 20 mm
11 4 Moldura 4 Compensado 20 mm
12 2 Moldura Interna 1 Compensado 20 mm
13 1 Painel Traseiro Compensado 20 mm
Volume Interno (Líquido) da Câmara do Falante 18": 100 litros.
Fb: 60 Hz
Volume Interno (Líquido) da Câmara do Falante 15": 80 litros.
Fb: 69 Hz
Inferior: 40 Hz.
Freqüências de Corte:
Superior: 150 Hz a 200 Hz.
NOTAS:
Falante 18":
Inferior: 150 Hz a 200 Hz.
Superior: 1.200 Hz a 1.600 Hz.
Falante 15":
Inferior: 1.200 Hz a 1.600 Hz.Driver:
79. A L T O - F A L A N T E S
modificações sem prévio aviso.
reservamos-nos o direito de inserir
Devido aos avanços tecnológicos,
ELETRÔNICA SELENIUM S.A.
BR 386 Km 435 - CEP: 92.480-000
Nova Santa Rita - RS - Brasil
Tel.: (51) 479-4000
Fax: (51) 479-1150
www.selenium.com.br
SELENIUM USA
USA
www.seleniumloudspeakers.com
SELENIUM EUROPE
Germany
www.seleniumloudspeakers.com
A L T O - F A L A N T E S
Ítem 1
Qtde: 2 peças
Side-fill
Modelo: SF-A2
F:CAIXAS ACÚSTICASSIDE-FILLSF-A2SF-A2
03/03 - Rev.: 01 - Página: 4/5
Dimensões em cm.
Ítem 4
Qtde: 1 peça
68,0
62,6
Ítem 3
Qtde: 2 peças
Ítem 5
Qtde: 1 peça
10°
2,0
2,0
50,8
47,4
80°
80°
80°
80°
50,0
44,0
31,4
20,0
40,0
55,4
35,5
Ø
10° 10°
54,1
10°
10° 10°
50,0
55,4
Ítem 8
Qtde: 1 peça
Ítem 10
Qtde: 1 peça
40,0 2,0
Ítem 6
Qtde: 2 peças
2,0
Ítem 11
Qtde: 4 peças
27,0 2,0
2,0
2,02,0
10°10°
58,6
24,0
29,4
42,2
Ø
80. A L T O - F A L A N T E S
modificações sem prévio aviso.
reservamos-nos o direito de inserir
Devido aos avanços tecnológicos,
ELETRÔNICA SELENIUM S.A.
BR 386 Km 435 - CEP: 92.480-000
Nova Santa Rita - RS - Brasil
Tel.: (51) 479-4000
Fax: (51) 479-1150
www.selenium.com.br
SELENIUM USA
USA
www.seleniumloudspeakers.com
SELENIUM EUROPE
Germany
www.seleniumloudspeakers.com
A L T O - F A L A N T E S
Side-fill
Modelo: SF-A2
F:CAIXAS ACÚSTICASSIDE-FILLSF-A2SF-A2
03/03 - Rev.: 01 - Página: 5/5
Dimensões em cm.
Ítem 2 Ítem 7
Qtde: 1 peçaQtde: 2 peças
94,0
10°
10°
10°
10°
121,0
51,1
47,4
45,8
27,0
10° 10°
61,9
14,3
2,0
2,044,1
10° 10°
Ítem 9
Qtde: 1 peça
Ítem 13
Qtde: 1 peça
Ítem 12
Qtde: 2 peças13,8
Ø
26,5