The Codes Of Ethics And Ethics In Engineering

The Codes Of Ethics And Ethics In Engineering
Introduction
Ethics
Ethics can be best defined as the analysis of the traits of moral or social which includes the social selections of a person as they communicate with
people. Ethics should be highly considered by engineers and engineers should be mindful of it as they are making professional decisions in the field of
engineering. Ethics is divided into two, some are preventive and others promote welfare to the society.
Engineering ethics Engineers as professionals are governed by some rules and standards that are related closely to ethics. Engineering ethics is
described as the rules and standard that controls the management of engineers as professionals, or the application of a series of scientific discipline in
the field of engineering. ... Show more content on Helpwriting.net ...
There is no clear cut solution to a single problem or a case study; however, there are many right solutions to it. Various solutions can be made to an
ethical problem, as it resembles the open–ended engineering design problems.
Codes of ethics Multiple professional engineering societies have managed to initiate some codes of ethics. The roles of the codes are to provide
bodywork for an engineer in making ethical judgement. Apart from that, these codes demonstrate the rights, responsibilities and the commitments of
the engineers. It also assists the engineers by providing a starting point to make any ethical decision.
Since the codes of ethics are not legal documents, disobeying its provisions will not result in taken into custody or imprisonment. However, the person
who violates it may be expelled from a professional society, such as National Society of Professional Engineers (NSPE) and American Society of
Mechanical Engineers
... Get more on HelpWriting.net ...

Advantages And Disadvantages Of Job Design
Job Design can be defined as the process of deciding on the contents of a job in terms of its duties and responsibilities on the methods to be used on
carrying out the job, in terms of techniques, systems and procedures and on the relationship that should exist between the job–holder and his superiors,
subordinates and colleagues.
Job design originated in the early 1900s, Frederick Taylor believed that efficiency could be improved by carefully designing work to increase
productivity. He supported structuring jobs for simplification and standardization. 'Simplification' means breaking down the job into smaller tasks and
then having each worker perform a small part in the total operation. A worker does the task repeatedly, the result is extreme... Show more content on
Helpwriting.net ...
Job Specialization: Job Specialization was an early feature of job design and was introduced by Frederic Taylor who was the chief proponent of
scientific management in 1920s. This method included breaking up of a task into smaller units of work. The workers undertake specific aspect of
the work. Through this method the workers determine that most effective way of performing each task. The advantages included expertise
stemming from acute specialization, less costly and shorter period of job training, less wage because the job is unskilled and greater managerial
control. However there were a number of disadvantages including insignificant contribution of the individual which lacks meaning, there is no
opportunity for the individual to develop skills and further his/her career and the work is repetitive and boring with negative side effects such as
tardiness, absenteeism, turnover, dissatisfaction, frustration, apathy and carelessness. Nevertheless, scientific management based on Taylor's
principles still appear to be alive, like in the work of Walter and Guest in 1952 who studied the people who worked in a car assembly plant in order
to establish how satisfied they were with the various aspects of the job. They noticed that the workers were happy with their pay, the way they were
supervised, working conditions, but they were extremely dissatisfied with the real work they were doing. Therefore it was noticed that the application
of scientific management had implications in terms of efficiency but, if carried too far, acute specialization would generate a number of adverse
impact. As a result it was observed that there should be less monotonous jobs and in this respect two alternative approaches to job redesign– job
rotation and job enlargement were

Ethical Dilemma Employment Law
Engineering organizations around the world have become more diverse and immersed in the culture that surrounds their physical location. This is due
to the advancement of technology and infrastructure over the years in the engineering field. The engineering organization that will be analyzed in this
report has had rapid growth from a financial perspective as well as employee growth. This organization has a current full–time employee count of
approximately three hundred with a part–time employee count of approximately twenty. Employees in this organization can be categorized into the
following categories; accounting, administration, executive, management, human resource, skilled laborers, technicians, engineers, and customer
service. The organization is financially stable and the workplace morale is good, however there are ethical ... Show more content on Helpwriting.net ...
The first one that this organization is facing due to the increasing number of employees year to year, is in regards to the Fair Labor Standards Act of
1938 (FLSA). The ethical dilemma that could potentially arise in the organization is the pay discrepancy towards some employees regarding employee
overtime pay and compensation. If two employees engage in conversation and one brings up overtime and that other employee does not get overtime, it
may have that employee questioning the pay scale within the organization. The other ethical dilemma this organization faces regarding employment
law is how employee safety in the workplace is handled. The organization currently only has one certified safety position to oversee all activities in the
company. This is a considerable ethical duty to uphold when it comes to overseeing three hundred plus employee. Violations and issues can be missed
therefore resulting in fines, some substantial, to the organization if not

Aerospace Engineer Research Paper
Description of an Aerospace Engineer As people grow up, they need to pick what they want to do for a living. Out of all the careers in the world,
being an aerospace engineer would be the coolist. If anyone really enjoyed making paper airplanes as a kid, this is the job for them. It's not all fun
and games; aerospace engineers create models, test performance, and work on the quality of their designs. In a fast–paced working environment,
aerospace engineers work with computers, process information, analyse data, and make decisions to solve problems. They can be found working at any
corporation that makes planes, helicopters, missiles, spacecraft, and everything else that flies. The aerospace engineering field can be narrowed down to
aeronautical

Aerospace Engineering Personal Statement
I am applying to the master's program in the Guggenheim School of Aerospace Engineering where I wish to continue my studies with a focus in
computational structural mechanics and the design of composite structures. I have a strong desire to work in the field of high performance structures
upon graduation. The program at Georgia Tech is well suited for my continuing educational goals as the aerospace graduate school is one of the top
graduate programs in the nation and has a strong research and teaching focus in the field of high performance structures. I am a good fit for this
program as I have exhibited a strong aptitude in my undergraduate mechanical engineering coursework at Georgia Tech and a willingness to take on
new and challenging tasks ... Show more content on Helpwriting.net ...
The Eagle Scout award required my continual work over a 7 year period, from tasks of basic outdoors skills, to holding several a leadership
positions inside the Boy Scout Troop, and finally culminated with the planning and completion of a large Eagle Scout Project. For my Eagle Scout
Project I planned and oversaw the construction of four picnic table for the United Methodist Children's Home in Decatur, Georgia. The United
Methodist Children's Home is an organization which helps orphaned children and struggling families. As part of this project I went through the entire
project management cycle. My project started with the initial planning and proposal writing to gain the initial approval of the Atlanta Area Boy
Scout Council. Once this was complete, I finalized the table design and procured all the necessary and materials including obtaining material
donations from a large home improvements store based in North Carolina. With this I enlisted the help of my fellow scouts to begin the construction
of the tables. Construction was completed over the course of two separate work days, during which I supervised the work of 14 scouts. Once the
tables were complete they were delivered to the children's home. Finally, as part of the requirements for the Eagle Scout Award, I wrote a project
overview paper were I detailed all of the steps taken throughout the entire

The Practice Of Music And Enables Artists And Guest Curators
Preface Introduction
Have you ever rushed around Newcastle, totally preoccupied with the hectic hustle and bustle of city life? Passersby are often too busy or late for
something to really take in their surroundings. The practice of busking has given Newcastle a soundtrack, a musical backdrop to the chaos of city life.
However, street performers are often restricted to limited areas in order to oblige the regulations set out by the council.
This book introduces the aim of the project whereas to promote the practice of music and enables artists and guest curators to explore their creativity
while participating and engaging with music. A platform provided to become the mass populist entertainment for the population.
Speaking of music ... Show more content on Helpwriting.net ...
The lack of interesting places for concert has affected people to have less interest in visiting music spaces and there should be a suitable one for the
use, enjoyment and also benefit the people of this vibrant city.
It may not be the ultimate music space, but the premise of this project is to unite musicians with supported facilities and give them the opportunity to
promote their own music. Audiences will be offered with a fully immersive ambience and a complete program of professional cultural entertainment.
The book will demonstrate the intention of creating the music hall through its position first and foremost as an entertainment, and secondly as a
cultural presence that is increasingly seen as a key element in regeneration plans.3
Nature of Subject / Topics
A lot of people's perception of buskers is both brutally frank and ironic despite this artistic practice has always been as part of the contribution to this
culture. They are far less appreciative of these performances that are carried out with a genre which they could never normally encounter. In
consideration of the addressed matter, the music hall services as a stage that nurtures homegrown talent and accommodates wandering players.
Given a few successful real life examples showing that there are indeed some of the world's most famous artists started as street performers, from

Engineering Ethics: The Aspects Of Engineering And Ethics
INTRODUCTION
Engineering Ethics come from two words, which is engineering and ethics. Engineering is one of the applications of science to meet human needs and
desires. Combines engineering science, mathematics, and experience to design an object or process. Professional engineering practice called engineers.
The word engineering came from Latin word which is ingenium meaning 'contrive, design'. In this 21st century, engineering had been use widely
surround human life. The word ethics derived from the Greek word which is "ethos". Ethos means morality or custom character. Synonymous with
the word moral comes from other word "Mos" to the plural "Mores" which means custom or way of life. Therefore, engineering ethics is a set of
scientific discipline that applies to the profession of engineering. In 19th centuries, engineering ethics was not view as professional concern. But it is
view as personal concern. In early of 20th centuries, disaster such as series of significant structural failures, including some spectacular bridge failures,
notably the Ashtabula River Railroad Disaster (1876), Tay Bridge Disaster (1879), and the... Show more content on Helpwriting.net ...
In addition, to wider the mentality of engineer not only to understand engineering as science and mathematics but to get them to talk in ethical
categories and able to understand engineering at a philosophy level. This is because the engineering involved in various aspects of everyday human
life. For example, medical engineering. The engineering involved hospital where all hospital equipment involving machines made by engineers.
Imagine a world without engineers who have no ethics. Where all creation is created without efficiency. Perhaps an accident will happen as in the 20th
century. Thus, engineering ethics are very important in engineering to open the minds of engineers that engineering plays a vital role in society and the

Engineering Performance-Based Fire Codes
Preliminary views on implementing Engineering Performance–Based Fire Codes in Hong Kong: What should be done? Abstract Engineering
performance–based fire codes (EPBFC) are to be developed in Hong Kong. Before implementing EPBFC, or even writing down what should be
done, such as the fire safety objectives, current prescriptive fire codes should be understood. This will be a very big project to be tackled step by
step, certainly not regarded as a normal consultancy project which can be completed within a short period of, say three years. Key points on suitability
of implementing EPBFC in Hong Kong, or preserving prescriptive codes but with active updating are discussed. Approaches used overseas are... Show
more content on Helpwriting.net ...
In fact, before deciding whether to stick to prescriptive codes with active updating or to use EPBFC, well–planned long–term investigational works
should be carried out. This should also be a 'life–long' research project for upgrading the code to solve new problems encountered. This was well
recognized by The Hong Kong Polytechnic University (PolyU). There, EPBFC has been studied since 1995 with some support of Area of Strategic
Development: Construction Industry Development Studies and Research Centre. A journal [37] reporting the development, problems encountered,
scientific principles, engineering judgements and practical examples was established. It appears that if EPBFC is applied properly by experts with
good training in fire safety engineering such as those holding PhD degrees, and with practical engineering experience up to Chartered Engineer status,
the following can be achieved as reported in the literature [13–34]: в†ђ Better fire safety provisions than described in the older versions of prescriptive
codes for both passive and active fire safety measures [18]. в†ђ Regulations requiring systems that might not work in a fire or even give adverse effect
can be pointed out and updated. The requirements of installing sprinkler at high headroom atrium and in escape staircases are obvious examples. This
is similar to imposing the local speed limit of 50 km per hour in downtown areas where almost all drivers will not pay attention to!

Reflection Essay
It was the first day of the new semester. Dr. Razzaque, the professor giving the introductory lecture of his fluid mechanics course, decided to start with
an audacious statement. "If you think mechanical engineering is too broad in scope for your liking, remember, you have seen nothing yet." Aware that
he had the class's attention, he went on, "Think about what you have learned so far. You have taken courses in physics, multivariable calculus, electric
circuits, computer programming and so on. It will be some time before you will properly understand how all these elements come together, but when
you do, you will probably be surprised by your own understanding of the world." He then went on to explain, citing Formula One, computational fluid
dynamics and biomimetics, how mechanical engineering brings very diverse skill sets together. Those words felt, at the time, like a key to making
sense of the plethora of courses that was my college life. Dr. Razzaque had suddenly made me realize the relevance of what I was learning. It would
prove to be a pivotal point in my academic life. That lecture, and the following course, renewed my passion for mechanical engineering. I joined Dr.
Hasan's lab a year later as an undergraduate researcher and now I aspire to pursue graduate studies in mechanical engineering. All of these can be
traced back to that quiet spring morning more than two years ago.
While Dr. Razzaque's course did not cover much of the coming together he alluded to, my

Computer Resource Using Virtualization Technology
Among these SPE process, we focus on load generating of performance testing. There are many load generating tools like Load Runner [13] and Silk
Performer [14]. However, tools cannot cover every testing scenario. In a server/client environment, client sends information to server generally.
However, server may send information to client. Existing tools cannot support that scenario. If a tool does not understand communication protocol, it
cannot generate load and if DUT[2] uses new technique that tool does not support, it cannot
generate load. In those situations, we cannot use existing load generating tool and we may have to use many real computers and lot of people are
required to operate software on those computers which is not ... Show more content on Helpwriting.net ...
Architecture of the tool
The overall architecture of the tool is presented in Figure 1. Virtual computers are generated from real server. The number of virtual computers
generated from a real server depends on the scenario under which the DUT[2] is to be analyzed. Each Virtual Computer has a different IP Address.
Thus, each virtual computer acts as an individual client. The user (tester) just interacts with the physical computer and executes the python scripts
present. These scripts activate the virtual computers which interact with the DUT[2] and generate traffic depending on the profile which the user
selects before the test begins.
Virtualization is a technique that abstracts computing resource. It enables the users to create a simulated environment and use the resources
effectively. Virtualization is divided into several categories as purpose such as server virtualization, network virtualization, desktop virtualization,
application virtualization and so on [15]. In this paper, we use desktop virtualization technique to perform software performance test. There are a lot
of desktop virtualization products such as VMWARE [16], Virtual PC [17], Parallels [18], Virtual Box [19] and so on. We selected VMWARE
because it is the most frequently used product and it uses computing resource efficiently. It enables the users to use all the CPU cores effectively. It also
has high compatibility with various

Hrm 531 Week 3 Individual Assignment
TO: John Doe – Engineering Technologist
FROM: Ivan Semenov – Engineering Manager
DATE: September 10, 2015
SUBJECT: Behavior Concerns
Thank you for serving our company as an Engineering Technologist. Your role is very critical to our success as a whole. Without your technical
knowledge and leadership, we wouldn't be where we are now. This notice serves as a follow up with a conversation we had previously on September
3, 2015. I shared some behavioral concerns that are in need of improvement.
At this time, you are not meeting the following performance requirements for this role.
Addressing the issues/problems in a calmly attitude.
Your role as anEngineering Technologist is very crucial to our company. You have been serving this company

Human Factors Of An Engineering Design Process
1.Provide a brief discussion of the main points in this article
Human factors or ergonomics is beneficial when it is incorporated in the early stages of an engineering design process because it focuses on improving
worker efficiency which leads to a better engineering design and business performance. HF specialists must try to understand the manufacturing
/industry process, engineering production design issues and corporate strategies so they can effectively link them with human factors and work with
engineers to adapt tools and techniques to include human factors. By conducting a planned research, the team was able to: a) Help human factors
specialists and engineers to overcome their differences of educational backgrounds, ... Show more content on Helpwriting.net ...
"Engineers in new product realization mostly didn't know what the human factors specialists could offer or how to engage them" (p. 37).
Information processing approach characterizes thinking as the environment providing an input of data. The information can be stored, retrieved and
transformed by our senses using mental programs with the results being behavioral responses.
The conception of the human as an information processing system is invaluable for the investigation of human factors issues because it meets the
requirement of allowing human machine performance to be analyzed in terms of the same basic functions.
The human factors specialists can input bring this valuable knowledge of information processing approach in the design of assembly line design
because efficient assembly line design not only requires efficient machinery but also efficient human operators for overall production and quality.
3.What links to Human Factors were realized on the merged map? How do they relate to class concepts?
The links to Human Factors that were realized on the merged map are described as the five tools adapted for human factors, which were integrated
into various stages of production design. These tools were HF pFMEA, HF DFA targets, HF DFF targets, Workstation layout template, and HF kaizens.
The linkage between the human factors concept of "reducing fatigue" and the strategic goal of

Paul's Vocabulary Immigrant
Passionate. That is primary word that comes to mind when I talk about Paul Spezza. Throughout my career I have had the privilege of working for
many students whom say that they are passionate about something, but never follow through with action. Paul is the opposite. The amount of
activities that he is immersed in inclines me to say that there is "no rest for the weary" and I would say that the word failure is not in his vocabulary.
No wonder he is currently ranked as our school's valediction out of a class of 932 students.
Paul's stellar intelligence, determination and academic performance are a testament to what he is more than capable of accomplishing. And while
taking honors and advanced placements classes at Forest Hills High School ... Show more content on Helpwriting.net ...
Along with academics and out of school research opportunities, Paul also currently holds the position of vice president in our senior government and
is the treasurer of our community service based Key Club. When speaking to his teachers and advisors, they would describe him as an introvert, yet
when working with others he is swift to know when to apply his leadership skills and when it is the time to allow others to shine.
In addition, he has over 100 volunteer hours by joining in such activities as being a mentor and afterschool tutor for elementary school aged children,
participating in various awareness walks for the American Lung Association and St. Jude's Hospital, and assisting in multiple events as an active crew
member providing clean–up, service of food, and distribution of event materials.
Paul is an excellent candidate to represent the top of his graduating class. He is a young man with character and integrity and fully understands that
rising to the top should never come at the detriment of others.
Therefore, it is with much enthusiasm that I recommend Paul Spezza's application to your institution. I anticipate extraordinary works from Paul and if
selected by your university I believe he will contribute wonderfully to your

Appalachian Spring Concert Report
Exposition IV: An Appalachian Spring, is a performance of various musicians within Virginia Tech's School of Performing Arts. The event took place at
Moss Arts Center in the Anne and Ellen Fife theater, with musicians stationed on stage and on the side balconies. A different instrument section played
each segment of the performance, including: horn ensemble, string ensemble, bassoonists, percussion ensemble, jazz ensemble, the Linux Laptop
Orchestra, Kinect sensor and computer, and male and female choirs. This exposition was held in order to benefit the performing arts scholarship
program at Virginia Tech, but it seemed that the performance had the goal of showing off the individual ensemble's talents, and, in the end, combining
those talents.
Growing up in the Appalachians, I have had plenty of experience with bluegrass and folk, and the wide range of the culture that has had influences on
the music. Due to my background, I've heard two of the three songs which were being adapted. I attended the exposition curious to see how Bigler
would adapt the music to an orchestra, having heard him discuss this in class. Since the transition was ... Show more content on Helpwriting.net ...
The lyrics talk about agriculture also provided a direct link, but I didn't feel the connection in the pieces before Bigler, as much as I enjoyed them.
Since he came to class prior to the event, I could see why he chose the songs, and the process he had to undertake to prepare the songs for the
exposition, which helped me to understand why some songs were heavily changed. As an engineering major, the more technological performances: the
Linux Orchestra and the Kinect sensor, could potentially pertain to future tasks and problems within my major. All in all, I enjoyed the show and was
thankful for getting the chance to experience

My Passion For Engineering
My passion for engineering began when I came across the quote: "Technology are devices that make our lives better". Despite my first love of
mathematics, my recent interest for engineering has come from two major influences. The first being my mathematics and physics teachers, both
engineers by qualification, who have helped me enhance the fundamental skills essential for engineering and embrace the importance of the field. The
second being learning about uses of technology in computer science, it taught me the magnitude which technology contributes to our lives and has
resulted in my desire to improve the lives of others.
I believe that my mathematics and physics skills would make me a proficient engineer. Proven by my consistent ... Show more content on
Helpwriting.net ...
Likewise, I have gathered the difference in walking and running in terms of motion, energy storage and efficiency. Developing such knowledge at
undergraduate level will supply me with sufficient expertise to improve current models.
I've also spent my summer visiting museums to observe great engineering successes and how they affect the world. In a noteworthy humanitarian trip
to Belarus, where I visited the well renowned BelAZ factory. This company creates some of the world's largest mining vehicles, including the BelAZ
75710. This monstrous vehicle has a staggering capacity of almost 500 short tons and a height of over 8 meters, it showed me the importance of
engineering in the modern world from large scale products such as BelAZ to nanotechnologies such as artificial muscles.
Outside the curriculum, I am a keen sportsman and musician. Captaining my club and school football team at various levels have helped me develop
my team work, communication and leadership qualities, all essential assets when working on group projects. I've been competing internationally in
Taekwondo from a young age, having represented the Welsh national team at junior and senior level, and winning Silver in the British Championships
(U18 Black Belt). Consequently, it has helped me to flourish when working

My Passion For Engineering
My true passion for engineering began when I came across the quote: "Technology are devices that make our lives better". Despite my first love of
mathematics, my recent interest for engineering has come from two major influences. The first being my mathematics and physics teachers, both
engineers by nature, who have helped me enhance the fundamental skills essential for engineering and embrace the importance of the field. The
second being the learning about uses of technology in Computer Science, it taught me the magnitude of which technology contributes to our
everyday lives has led me to intensify my desire to improve the lives of others. I believe that my mathematics and physics skills would make me a
proficient engineer. This is proven with my consistent performance in the UKMT, achieving top of year for 5 consecutive years and reaching the final
round in the intermediate stage as early as year 10. This has allowed be to demonstrate my flexibility and adaptability, which are both important factors
to my strong problem solving skills. With no previous experience with engineering, a great deal of my knowledge for the subject comes from studying
mathematics, physics and computer science at A–Level. In preparation to study engineering at university, I have decided to read the books "Think like
an engineer" by Guru Madhavan and "Cats' Paws and Catapults" by Steven Vogel. The reason behind this was to grasp the methods in which a skilled
engineer would think and enhance basic knowledge about the effects of materials and forces. My aim for the future would be to use my engineering
knowledge to create more efficient mechanical limbs that may allow amputees to run and jump. From my reading, I have gained awareness of how
natural tendons have certain physical properties that allow them to function efficiently. This include very low strain which allows the animal to
rebound without wasting high energy, as the animal takes a stride the tendon compresses and absorbs energy, it then releases it when the animal springs
forward. From the books, I have also gathered the difference in the walking and running in terms of motion, energy storage and efficiency. Developing
such knowledge at undergraduate level will hopefully

What Strategies Would Strengthen Your Commitment To...
Homework for Chapters 1 and 2 Name: Jack Johnson
1. Graduating with a BS degree in engineering or engineering technology: How important is that goal for you? According to the book, what strategies
would strengthen your commitment to succeed in obtaining your goal? Describe them.
Graduating with a BS degree in engineering is most definitely a goal for me. Based on my reading a good way to ensure my success is to make goals
for myself that can be completed in a shorter time span than one big goal. The act of complete goals gives me a sense of completion and reassures
me that I'm on the right path. These goals can be planned out to make my life go in the direction I want it to. The reading showed me that there are 3
keys to success as an engineer, ... Show more content on Helpwriting.net ...
Think about your life situation in terms of the factors presented in chapter 1. Are there things that come to mind about your living arrangements,
workload, or expectations/demands of family and friends that need to be changed if you are going to be successful in engineering study? List those
things and come up with ways to bring about the needed changes.
I have seen how thing such as living arrangements and expectations of other people around me can negatively affect my academic performance. And
that is why I no longer stress myself out about the actions of others. The most important thing for me to keep in mind is my own actions and how I
need to get my work done, and learn it at the same time.
3. Review Ray's top ten list of rewards and opportunities that will come to you if you are successful in getting your engineering degree. Which item
on the list is most important to you? Money? Prestige? Challenging work? Making a difference in the world? Reflect on the one you chose. Why did
you choose it? Why is that one so important to you?
My reasoning for choosing an engineering degree to begin with is because I enjoy understanding how things work, and I've always been good with
my hands. I have always enjoyed engineering based classes in my past. But my main reason for deciding to pursue an engineering degree was to be
financially secure in the

Hr Officer
CHAPTER 5
TRUE AND FALSE
1.Jobs designed with scientific management principles in mind are general and varied. False
2.Work teams usually do not have the authority to assign roles within the team. False
3.In highly specialised jobs, employees have little input into the way their work is performed. True
4.One of the fastest–growing productivity improvement programmes in South Africa as well as internationally, has been total quality management
(TQM). True
5.With job enrichment programmes, the worker is provided with an opportunity to derive feelings of greater achievement, recognition, responsibility
and personal growth in performing a job. True
6.Compressed work – weeks are schedules with fewer than the ... Show more content on Helpwriting.net ...
True
33.A job description is a statement of the tasks, duties and responsibilities of a job to be performed. True
34.Job analysis is the process of obtaining information about jobs through a process of determining what the duties, tasks or activities of those jobs are.
True
35.Conducting job analysis is primarily the responsibility of the jobholder. False
36.Ultimately, the purpose of job analysis is to value a job and establish its pay rate. False

37.Common methods of analysing jobs include interviews, questionnaires, observation and diaries. True
38.Employee interviewing is the most accurate method of job analysis because the employee is least likely to exaggerate essential job functions. False
39.Job analysis is usually more accurate and objective if the job analyst can prepare the job description without consulting supervisors or jobholders.
False
40.Functional job analysis provides a quantitative assessment that can be used to describe the content of a job. True
41.The functional job analysis approach is worker–oriented and permits dimensions of behaviour to be compared across a number of jobs. False
42.Most job descriptions include a job title, a job identification section and a job duties section. True
43.Job specifications usually cover two areas: (1) the skill required to perform the job and (2) the level of autonomy inherent in the position. False
44.A problem with job descriptions is

Computer Engineering Personal Statement
After completion of my national service, I set my eyes on gaining more work experience and then pursuing a Msc degree. I am excited to now be
on the cusp of making that dream a reality. I have come a long way from the reserved college freshman who dreaded the thought of being a student
class leader because it involved public speaking, to a flamboyant leader and colleague. I conquered those fears to now become the Project Coordinator
for the GRA (Ghana Revenue Authority) and GCNET E–Government project.
My engineering degree has given me a strong foundation for my analytical and technical skills. A Computer Engineering degree involves complex and
intricate calculations and the application of basic math skills. I am interested in factors ... Show more content on Helpwriting.net ...
I believe a Masters degree in Engineering Business Management will give me the invaluable skills to manage, lead and collaborate effectively with
people. It will also develop my abilities to analyze problems from a business perspective, keeping in mind the constraints and limitations of the real
world.
At CIPD GIMPA, apart from being a Systems Engineer, I am also an instructor in IT Service Management (ITIL V3) which is a framework for service
delivery used by Vodafone, Toyota Ghana, Newmont Ghana, Tullow Oil, just to mention a few. This program has given me the opportunity to interact
with a number of policy makers, industry analysts and economists in an effort to understand the dynamics and important issues connected with each of
these industries. All this has given me invaluable insights into the environment in which companies operate, how they affect their environment and are
affected by it. It has enabled me to observe some of the efficient ways and not–so–efficient ways of running a business. Certain discussions in class
have been thought–provoking; my most recent class discussion on the redesigning of a company's structure and systems in terms of service delivery,
brought out the necessity of good organization structures and significance of systems that work well.
The time limitation of preparing for class and troubleshooting network problems, has taught me to plan well, work systematically and keep myself
up–to–date with the latest

Career Planning Process Analysis
1.Introduction
Deliberate goalsetting and planning can be helpful to ensure a career which is both successful and fulfilling. Career planning is the process of
evaluating your interests, preferences, skills and objectives, all to ensure that your work is in good agreement with personal values and strengths.
Reflecting on a viable career plan is particularly important for U of AEngineering graduates as the economy in Alberta has seen heavy turmoil in recent
years, resulting in the loss of job opportunities. As a result, setting realistic goals and strategic planning is essential to navigate the rough economic
landscape.
Career planning allows the opportunity to reflect on career progression, get an improved sense of direction and ultimately ... Show more content on
Helpwriting.net ...
Additional information gathered from my personal experiences will be outlined here.
In addition to assessing my current state through skills assessments, such as ALIS, strength based assessments have been shown to be more useful for
career development. One example is StrengthsQuest (Gallup, 2016) which is a program that aims to help students to discover and take advantage of
their personal strengths. StrengthsQuest is being used across campuses and organizations to develop strength maps for project teams and working
groups. Strength maps help to identify strengths and weaknesses within a group plan and accordingly, plan for success.
When researching companies and average salaries, I often turn towards Glassdoor ("Glassdoor," 2016) as a source for company reviews, salaries and
company interview practises. The data curated on Glassdoor is maintained by current or former company employees which further reinforces the
creditability. This information is particularly useful because Glassdoor users have posted questions that companies use during the interview process
and salary information is available for specific positions within an organization.
3.Interviews and

How Information Technology Successfully Impact On The...
LITERATURE REVIEW ARTICLE NO 1 Exploring Factors that Contribute to Success of Business Process Reengineering and concussion of Business
Process Reengineering on Organizational Performance: OBJECTIVE: Objective of this study is to endeavor the dependency of business process
re–engineering and organizational performance. Through this research they are trying to conclude the significant factors that are involved in successful
implementation of business process re–engineering. The role of information technology also examines in this study that how information technology
successfully impact on the business process re–engineering. SAMPLE SIZE: Pakistan's Banking sector was selected for this research. Calmative is the
nature of this study. Open... Show more content on Helpwriting.net ...
According to this research some important factors are these which are involved in the perfect alignment of business process re–engineering. пЃ¶Perfect
planning before the implementation of business process re–engineering. пЃ¶Made effectives strategies for the success of business process
re–engineering пЃ¶Amend rewards. пЃ¶Open and influencing communication channel to deliver your process to the employees. пЃ¶Empathetic
organizational culture is another success factor пЃ¶Effective information technology system has a great importance in success of business process
re–engineering. пЃ¶Employees motivation and their full involvement in also consider in its success пЃ¶Successful implementation of business process
re–engineering also require healthy investment. Information technology has a vital role in success of business process re–engineering. This research
also emphasize on adequate framework of information technology. Information technology is very crucial for business process re–engineering through
banking sector or organization boost up their performance. The well aware of latest market development which help them to achieve successful
position among their competitors as well as satisfy their customer

Ase Code Of Ethics Essay
Based on the article from the Sacramento Bee on the Bay Bridge there were ethical violations violated by both the panelists and Caltrans that violated
the American Society of Civil Engineers Cannons one , four, and six. The first cannon of the ASCE code of ethics is that "Engineers shall hold
paramount the safety, health and welfare of the public and shall strive to comply with the principles of sustainable development in the performance of
their profession duties" (asce.org). From the Sacramento Bee article a panelist by the name of Nicoletti, said in an email that he was unaware of the
Caltrans analysis on the bridge, even though the panelist's findings relied on the analysis' conclusion. This violates the first cannon of the ASCE code...
Show more content on Helpwriting.net ...
A specific example where this code was violated in the Sacramento Bee article was that "Caltrans didn't reveal serious bridge–testing problems –
including fraud – to the public, elected officials, and the peer review panel itself." This is undoubtedly a violation of the sixth code of ethics. Not only
does violate the code of ethics but it puts into question whether or not Caltrans engineers should retain their license when they failed to provide
crucial information to the public and review panels. It is the job of an engineer to make sure that if there are critical problems to tests or projects
that it is reported to the public, officials, and other engineers such as panelists. Engineers should have the dignity to admit to problems found from
tests and project sites to other engineers involved in the project so that the problem can be fixed. It is better to have a problem revealed while a
project is in progress compared to revealing the problem when the project is over. Revealing problems early in the project may cost more money in
the long run but it will ensure the safety of the public which is the job of an engineer, instead of finding out that the project had a critical failure that
caused lives to be lost in the

S. T. Sem Fear Research Paper
S.T.E.M FEAR can be defined as the unpleasant emotions which deter an individual from engaging in activities in the field of Science, Technology,
Engineering or Math. S.T.E.M. fear is believed to be one of the main causes of the gender disparity seen in STEM careers worldwide. This
discrepancy has become a rising concern in the USA where woman account for half (50.8%) of the entire population. Studies show that although
women currently account for half the population, their presences in STEM fields are minimal. Therefore, articles such as "Letting girls speak about
science" and "The Impact of Robot Projects on Girls' Attitudes toward Science and Engineering," attempt to bring understanding to what factors
contribute to the gender gap.
пѓ Baker, D., & Leary, R. (1995). Letting girls speak out about science. Journal of research in science teaching, 32(1), 3–27.
In the article, Baker, and Leary attempt to determine what factors influence girls to choose science. Many studies have been dedicated to identifying
the differences in STEM achievement across genders. Yet, studies which identify the conditions which exacerbate STEM fear in women are few and
far between. Previous studies have ... Show more content on Helpwriting.net ...
Once conclusions of the quantitative study were recorded and analyzed, "the quantitative study was complemented by a qualitative study that followed
four teams: two all–girl teams and two mixed–gender teams". Data collection consisted of interviews, observations of teams, video tapings and audio
recordings, documentation and blog sessions created by team members. Results showed that beliefs in traditional gender roles played a major function
in perceptions of ability. Continued beliefs rooted in traditional gender roles and stereotypes adversely affected self–concepts of ability which
consequently led to lower expectations of

Using Mathematical Modelling And Faro Arm Software
j)The breaking distance and heat generated in the carbon ceramic matrix has also been calculated. Pro–Engineer and ANSYS was used to build the
required model for transient analysis. The design was prototyped, which was followed by result evaluation in the field tests.The model obtained after
ANSYS modelling was similar to that proposed by Nickam and colleagues (2014). Figure 8: Ansys Model for forces acting at the disc rotor
4.2 Reverse engineering using finite element modelling and Faro CAM2 software
This research thesis has aimed at identification of the functioning of the disc brakes and its essential parts. In addition to this, the forces acting on the
disc brake components, with special emphasis on the disc rotor and disc ... Show more content on Helpwriting.net ...
It has to be highlighted that in order to facilitate the reverse engineering requirements, the individual parts were drawn by using appropriate software
(Catia V6) and the corresponding individual component dimensions were measured. By taking into consideration the appropriate dimensions and facts,
a CAD model was developed by means of Catia software for digitally document the design information. It has to be highlighted that further design
changes in the disc brake is performed in accordance to necessary requirements and final assembly is generally carried out by means of comprehensive
manufacturing drawings which were prepared. Reverse engineering finds frequent use as a highly useful tool for manufacturers in the aspect of
re–considering their product design in a well–organized, efficacious and economical method. As far as the process of providing insights regarding the
design parameters that affect the longevity and performance pertaining to the products are concerned, reverse engineering has served as a methodology
to facilitate the study of mechanical engineering components and keeping up to pace with the contemporary market requirements. It has to be
highlighted that one of the most prominent aftermarket auto parts manufacturers in the global scenario has necessitated the use of

I Am Working With Other Parts Of The Project
One of the lessons that I have learned through my 4+ years of work experience as an EIT is that a good Engineer must always be aware of the real
life system limitations of any project he/she is involved with. With experience, not only are you able to keep aware of these limitations, but you can
also prepare for them. As Engineers, when we set out to design a product or system, we are working in a theoretical world with no limitations or
constraints. However, out in the real world, there are numerous constraints and limitations that come into play when we are forced to integrate our
design into a functioning tool. Many times, on large projects, I'm working with different groups and subcontractors. When I release an engineering
drawing, I have to understand that it must cooperate well with other parts of the project. This takes a lot of coordination with different disciplines, and
at times poses limitations on your design that would otherwise not be present. In my experience, I had to modify my design many times to better suit
the overall structure and project requirements. In other cases, constraints could be brought upon through legal and/or cosmetic means. For example, I
have been involved in projects where I would draft a design which boasts a solid engineering background. However, for any number of reasons, the
client might not necessarily like something and thus the design must be re–suited to that constraint. However, I have also learned to be mindful in this
area. If

Augusto Pinto Boal Research Paper
Augusto Pinto Boal the inventor of a theatrical school called 'Theatre of the Oppressed'. He was born in Rio de Janeiro (Brazil) on 17th of March
1931, when his country was ruled by a dictatorial military regime. Since his youth, Boal felt a great passion for theatre, and despite his degree in
engineering, in 1952 he attended a drama school in New York, where he encountered also Constantin Stanislavski and learned new theatrical methods.
In the same time, in SГЈo Paulo (Brazil) was born the ' Arena Theatre', which aimed to become a strong symbol of the nationalism and conservatism of
the Brazilian theatrical tradition. But when in 1956 Boal returned to his native country and becoming the director of that theatre, the latter experienced a

Ballerina Research Paper
I've always wanted to be a ballerina. It was my childhood dream; a little girl's vision. To imagine myself prancing around a stage, twirling and
twisting in all sorts of pirouettes, as the stage cheered and clapped me on filled me up with an unexplainable longing and joy. But that wasn't all of it,
not even half. It wasn't even dancing that made me want to be a ballerina in the first place. I had chased after that dream for so long, well into the 2nd
grade actually, all for the chance I'd one day get to wear the puffiest, cutest, silkiest, glitteriest pink tutu. And then my parents told me to think about
money. I don't think they approved of my ballerina tutu dream very much, although my dad was highly amused, I'm certain. So,... Show more content on
Helpwriting.net ...
Furthermore, I also considered engineering. My father was an engineer, and so is my uncle. I grew up surrounded by computers after my parents
had owned a computer shop in the early 2000's. Moreover, family bonding time would always either equate to pirated horror films where my dad
would wait for the right moment to spring a jump scare of his own upon us, or a good round of either StarCraft, Warcraft, Diablo, Doom, Ragnarok,
Counter Strike, Gun Bound or Load Runner, depending on what was our mood for that night. I believe myself to be as tech– savvy as one could get,
placing a thread through the eye of a needle was never a difficult feat either so I thought of the dexterity part to be done with. Building crafts has
always been fun, nor do I mind getting down and dirty so engineering, particularly computer science, sounded good enough of a go for me. KAIST
University situated in Korea is one of the top engineering universities in Asia, and the world. In addition to that, their main medium of language in their
lectures is English,

Simulation Modelling Essay
Simulation modelling is the procedure of developing and analysing a prototype of a physical model to predict its behaviour and performance in
real–world or over time. A model represents the system itself and the simulation represents the operation of the system over a specified time period. It
can be used to show the effects of possible conditions and the sequence of action. Modelling and simulation helps obtaining information about how a
system will perform without testing it in real life. It shows any flaws in the design and reduces potential errors with the system itself, as well the
operation of it. Also, validates the safety and durability of a physical prototype. This reduces the costs and increases the quality of products and systems.
Figure 1: Interaction between model, experiment, theory and the simulation of the system.
In civil engineering, a typical process of simulation modelling includes:
1.By using a 2 dimensional (2D) or 3 dimensional (3D) tool/application, develop a virtual model of a system to represent ... Show more content on
Helpwriting.net ...
Simulations can often be more realistic than traditional experiments, as they allow to change the environment parameters at any stage of the design.
Analysis and simulations can be performed faster and more accurate than hand calculations and experimental testing. This allows using them for
efficient analyse of different alternatives. Also, it is quicker to make decisions from using simulation applications.
Simulations set up a coherent environment that allows for integration of simulated systems in the early analysis phase with initial components to a test
environment for the final system. Then, this environment can be transferred from development and testing field to training and education phases for
the system.

I Am The Instructor Of A Kindergarten Classroom At Bandini...
I am the instructor of a kindergarten classroom here at Bandini Elementary school.
My students are between the ranges of five and six years of age. The subject in which I will be teaching my students will be music and dance
performance. Previously I have just taught the basic of music and dancing but I have been observing my students and notice that many have a yearning
desire for the different types of music and dance styles that are related no their cultures and the different cultures of the world. I am looking to bring the
different culture dance and music to my classroom and allow the students to create a dance and music performance that they can share the rest of the
school displaying the different cultures. By doing so the ... Show more content on Helpwriting.net ...
"Most of the impact of culture is subconscious: We don 't really know why we want to become a teacher, why we enjoy certain kinds of music, and
where the characteristics come from that we use when we choose a mate. Culture largely influences all of these traits
(Hall, 1976a, 1977). We also know that these cultural contexts are continually changing and that each individual processes membership in various
cultural groups differently (Wardle, F., 2013)."
Music has been placed in the curriculum of many schools but dance has not and I want to change that beginning with my students. Creativity is needed
and in dance and music there is always creativity involved. By having my students perform music and dance from different cultures it will allow them
to work together and be creative. The students will need access to videos, different instruments that are played by different cultures. We will be
providing learning through the art of music and dance. This also allows the students to express themselves in an emotional and physical way.
As my students get more comfortable with performing we would like to take them to different schools to perform. Also making this not just a
classroom project but move it to be an activity for the children for after school and eventually to where other students from other schools can join and
they can put on a performance all together. By bringing in teachers from different schools it helps to teach in different leaning styles

Performance Management At Precision Engineering
Performance Management in Action Performance management (PM) has been a part of organizations for many decades and primarily understood as a
fundamental function of the Human Resources (HR) department no matter what the size or industry of the business. However, more recently
performance management has shifted to being a competitive strategic advantage for organizations wishing to become high performing and overall
successful. As such aligning PM with organizational missions, visions, values, goals, and strategies has now become the direct focus of HR
professionals across the globe. As a HR manager, there are a number of situations which must be addressed with PM and support of other departmental
managers. Presented is the application of the PM process, with analysis, responses and action items, for five emails written by department managers
requesting advice on a number of situations from the organization's HR manager at Precision Machining Inc. Precision Machining Inc. Background
Precision Machining Inc. is a 65 year old organization which provides services such as welding, fabrication, machining, prototype design, engineering,
certification, assembly, and forming (CSU–Global, 2015). Their specialization is working with stainless steel, but they are versed in a number of other
appropriate materials. The company is extremely committed to high quality customer service by meeting unusual requests and demands (2015).
Further, their HR department has just undergone some

Graduation Speech : The University Staff And The Best...
1.0 Introduction
The next stage after the graduation is to obtain a graduation position in a company that will ensure my future career growth. This step will be hard to
make as there will be no guidance of the university staff and the support will weaken or disappear at all. Additionally, the new phase will be difficult
due to the different to university environment and the level of responsibilities. In order to be successful in obtaining the graduate position, I have to
show a certain level of dedication to the engineering activities with the understanding of the safety, ethics and morals that are accepted in the
engineering practice. In addition to this, I have to be considerate of the culture of the workplace, its diversity, social ... Show more content on
Helpwriting.net ...
2.1 Company Details
'Just Technology' is the Australian based telecommunication, data equipment and innovative networking supplier and solution provider. Just
Technology was established in 1999 by the current working director Paul Rankin with the mission to provide high quality innovative network and
cabling solution with the focus on the customers' needs and desires. The headquarters of just Technology is based in Perth, with branches in Melbourne
and Sydney. The company focuses on the understanding of the individual needs of each customer and provides solutions to meet those needs. The
company specialises on the production and installation of the 19 inch server racks, fibre optic solutions, specialised solutions, copper cabling, national
broadband and smart wiring enclosures. The company is actively participating in the connecting people by the means of the telecommunication
technology and new designs that are environmentally friendly and energy and cost effective. Within the company there are few departments such as
customer service, engineering design, manufacturing department, technical services, financials and policy organisations department. I desire to work
with the design engineering and planning department as it would give me an opportunity to implement my current engineering skills by working with
CAD software as well as

Process Of Decision Making For A Solution Essay
thought processes. There are many kinds of factors which can destroy promising innovation processes, and only by understanding the reasons for their
existence and their nature change management can respond to them. Many kinds of factors kill promising change processes, and only by understanding
the reasons for their existence and their nature, and innovation management can respond to them.
Brainstorming and case method are the primary technique used which favours combining in the process of decision making for a solution. Now the
topic to be work on were defined by common and particular elements of the problems which result in elaborative scope statement of different aspects
(San Juan, 2015).
Final Overview and Assimilation
Bottleneck Designing Process
Industry wants a high value of the product and to access that, the industry needs a proper seller to promote and preview all the points in various stages
of manufacturing (Inukai, Hibino, and Fukuda, 2006). The product design is one of the necessary steps to manufacturing processes because it takes
critical approaches to test and complete the processes, needed in the long run. This article talks about Bottleneck Management, which describes the
functionality of an organization. This process of management as essential for product design and engineering process. It takes into its brackets the little
elements of manufacturing processes (Johannes et. al, 2014).
The product design is one of the necessary steps to manufacturing

Audio Engineering Research Paper
From creating the musical scores in movies o orchestrating the sound systems for live events to designing beats for songs, audio engineers focus on the
science behind the art of music. Possible career pathways include a recording engineer, sound designer, video game audio content, television show
scoring, location recording, live sound reinforcement and audio system maintenance.
Most audio engineering programs consist of a four–year degree that combines general education requirements with music and production courses.
Whether you earn a Bachelor of Science (B.S.), Bachelor of Arts (B.A.) or Bachelor of Music (B.M.), you'll study the fundamentals in acoustics, music
theory, MIDI sequencing, Pro Tools and audio recording. Online courses are... Show more content on Helpwriting.net ...
While earning your B.S. in Music Technology, you'll study everything from calculus to harmonies to Pro Tools software skills. In the Master of Science
in Music & Technology program, you direct your course of study by choosing an emphasis, such as technologically assisted composition or
performance, computer music systems or instrument design.
Berklee College of Music, Boston, Massachusetts
A Music Production and Engineering (MP&E) degree from the prestigious Berklee College of Music gives you access to award–winning mentors and
premier recording studios that are filled with the industry's latest equipment and open 21 hours every day. You gain hands
–on experience in everything
from synthesis technologies to digital audio editing to producing music compositions. Berklee Online also offers a Bachelor of Professional Studies in
Electronic Music Production and Sound Design along with a variety of specialist, professional and master certification courses.
University of

Phd In Computational Engineering Statement
STATEMENT OF PURPOSE– PhD in Computational Engineering??
"In this mighty world many blabber about their dreams, but who identified their paths and persistently stuck on their words are the few ones, who are
known famous to the world. Being remained unknown would be my greatest regret. My path to chase my dreams is Mechanical Engineering, for a
proud mechanical engineer can say, "When we rest, the world rusts!"
I have had a special interest in mechanical engineering since my childhood, as I grew up watching my father develop complicated equipment for
power plants. Hence, I opted for a mechanical engineering course for my UG program. The concept of computational science and engineering which
uses numerical approaches to characterize, predict and simulate physical events and engineering systems using the laws of mechanics fascinated me. To
understand their advanced methodologies, I have pursued a Master's degree in CAD/CAM from VIT .
The courses in my PG program included Finite element methods, Applied engineering mathematics, Advanced stress analysis, Advanced strength of
materials, Advanced vibration engineering, Computational methods in heat and fluid flow etc. which gave me a greater knowledge in mechanical and
mathematical field. As a part of my Master's degree internship ... Show more content on Helpwriting.net ...
I have accumulated valuable experience in Multi physics analysis. Computational mechanics is a fascinating field in which learning feels like never
ending adventure. After exploring CAE tools like ANSYS Mechanical, ANSYS CFX etc., the thought like rigid body deflection of deflector due to
fluid velocity, is still not numerically solved. I feel that time has come for me to research in refining the problem solving approach than to solve
engineering

Entry Essay for Engineering Program at Texas A&M
Seconds gave birth to minutes and minutes to hours, yet my concentration remained resolute. Despite the daunting nature of the task, I remained
determined in what I had to achieve. For the first time applying some rudimentary scientific ideas I managed to build an intricate model of a toy car.
"You shall grow up to become an Engineer one day," my father exclaimed gazing at my laudable piece of creativity. I was only eleven and yet those
prophetic words unknowingly chartered my future course for me.
There are no engineers in my family to persuade me into becoming one. It was my own interest and curiosity that drove me into analyzing how things
work. Over the years I have developed a passion for solving complex problems that involve technical challenges. I have learnt that an engineering
problem does not have a standard solution to it and that an engineer has to choose the best from amongst the various options. The process of applying
scientific methods to solve real–life problems continued to intrigue me throughout my years of study, initially in the context of my own behavior, and
later to observe and investigate its impact on an increasing affinity towards Engineering.
When I was twelve, I went on a school trip to apipe factory in Lahore. I was fascinated by the way pipes were being subjected to hydrostatic pressure
tests to check the weld strength and flattening and bend tests to maintain strict quality control. Overwhelmed by the involvement of Physics and Math in

Makeup Artist Theatrical & Performance
Makeup Artist, Theatrical & Performance Duties and responsibilities are a good thing to know so you don't go to work not knowing what to do. If
you're a makeup artist then some duties and responsibility you have to do are confer with stage and motion picture officials and performers to
determine desired effects. Duplicate work precisely to replicate characters' appearances on a daily basis. Establish budgets, and and work within
budgetary limits. Apply makeup to performers to replicate period, setting, and situation of their role.
Some things I will need to are a certificate after high school or a high school diploma/GED know are business, arts and humanities, engineering and
technology. In business I need to know customer service and management.

The Outlook for Girls In Engineering and Mathematics Essay
areas of science, technology, engineering, and mathematics employers are not getting enough women (Pozniak). High school girls only represent 17
percent of computer science Advance Placement (AP) test takers (O'Shea). The most significant group of minorities who are behind in earning
computer technology degrees and working in science and mathematical professions are women. "Historically, women's low representation in science
and engineering was said to be due in large part of their lack of ability, interest, or both" (Horning 30). However, this is no longer a true fact according
to Ward. Some suggestions to increasing the amount of women in sciences include introducing already present women faculty as mentors. Over the last
three decades, ... Show more content on Helpwriting.net ...
Xie states that women with children have a much smaller chance to pursue a career in engineering. These women are less likely to receive a
promotion. Gender roles in society demand more of women in raising children. Differences in marriage and social life can be held responsible for most
of the difficulty that is placed on women in engineering. Interest in science, technology, engineering, and mathematics (STEM) is thinning for women
as they progress into higher levels. Women in grades 7–12 were surveyed to see if their interest in STEM fields were diminishing. According to Van
Leuvan, this survey showed that there was a decline in interest as these girls progress through high school. Throughout middle school and junior high
a love for mathematics can be developed. However, a loss of interest is present as soon as girls hit more demanding classes like calculus. Grades will
highly diminished and a fear for comprehension of mathematics in the future will develope. According to the article "Women and Minorities in
Engineering" a major outlook on success from students is their ability to understand calculus.
Aside from chemistry and physics, a one–year calculus sequence is a prerequisite for many engineering courses (Frehill). Bonsangue and Drew
described calculus as the "gateway course". They found that women who demonstrate good performance and persistence in calculus would likely
succeed in engineering. Moreno and Muller's research corroborated

Defense Architectural Framework
IEE 456 / 556: Introduction to Systems Engineering Mid–term exam (Fall 2014)
Sol. Q1. A) The Department of Defense Architectural Framework (DoDAF) is an architectural framework developed for the US Department of
Defense (DoD). The primary goal of DoDAF is to provide framework to systems that have complex integration and interoperability challenges. The
Framework is divided into three views as per the table shown below:
Sr.No.Operational ViewTechnical ViewSystems View
B.
MethodWhenWhy
WaterfallUsed for clear, fixed and very well–known requirements in small projects. Processes are linear.Easy to manage; rigid model; all phases have
specific deliverables with review process.
VUsed in small, medium size projects with substantial technical resources and expertise. ... Show more content on Helpwriting.net ...
The project is Agile, i.e. it can quickly adapt to changes in requirements. Hence, this method has high success rates.
Modern
SpiralThe costs and risk evaluation is important. Significant changes are expected throughout the product development process.High amount of risk
analysis leads to high risk mitigation. Additional Functionality can be added later on in the project. Sol. Q2. A) New Product Development (NPD) is
defined as the process of bringing a new product to the market on the Business and Engineering fields. It can be also defined as the process of
developing a product for sale from a market opportunity. There are various methodologies to develop a product are:
B) The stage gate process is an iterative project management tool in which a project is divided into stages and separated by gates. The rapid prototyping
process on the other hand is a product development method that emphasizes more on adjusting/changing the requirements according to the knowledge
gained as the project progresses rather than the traditional approach of rigorous planning before the development

The Codes Of Ethics In The Code Of Engineering Ethics
2.0Introduction
The word ethic itself is defined as a set of moral values and the system of moral principles that have been used to interact and communicate between
one individual to the group of people, community or association. When it comes to codes of engineering ethics, we must know that this is a set of
moral principles that need to be applied in the profession as engineers. In other words, engineering ethics bring the meaning as a set of law and
specific rules for the engineer to be follow in their job profession scope and applied in working environment.
Code of engineering ethics was created with formal organization at least at the late of 19th century. As years passed by, with more developed and
organized ... Show more content on Helpwriting.net ...
The most common engineering ethics will be by various professional societies like American Society of Mechanical Engineers (ASME), National
Society of Professional Engineers (NSPE), Institute of Electrical and Electronics Engineers (IEEE) and etc. These engineering ethics have only several
differences but all are using the same theme except for the IEEE code of ethics.
It is important to know that the big companies out there or huge organization may have their own engineering code of ethics with the same objectives
as to increase the integrity and quality of the work profession for each of the engineers and have their specific guidance in their work scope.
Noted that, this set of engineering ethics is very important and crucial for all the engineers to follow as it give a complete guidance and law for
engineering profession job. All the systems regarding to the engineering scope can be done successfully with conformity in the aspect of safety,
environment, welfare and public community if and only if the whole set of system is being

The Codes Of Ethics And Ethics In Engineering

Recommended

Recommended

More Related Content

Similar to The Codes Of Ethics And Ethics In Engineering

Similar to The Codes Of Ethics And Ethics In Engineering (9)

More from Jacqueline Donovan

More from Jacqueline Donovan (19)

Recently uploaded

Recently uploaded (20)

The Codes Of Ethics And Ethics In Engineering