The document summarizes the results of an experiment using an automatic hydroponics system with a myDAQ device. The system was tested at three different EC values (0.5, 0.25, and 0.35) by activating different water and fertilizer pumps. The system worked as intended, turning the appropriate pumps on and off to maintain the target EC values. The system demonstrates a new automatic hydroponics innovation using myDAQ that could be effectively utilized for teaching activities.
In biological systems, all the conversion processes can take place quickly at relatively low temperatures and mild chemical conditions, because enzymes help to run the reactions with lower energy input.
Best Experimental Practices for Live Cell Imaging with the 3D Cell ExplorerMathieuFRECHIN
Nanolive’s 3D Cell Explorer allows for the creation of very powerful 3D images and 4D time-lapses
of living cells with very high spatio-temporal resolution (x,y:180nm; z:400nm; t:1.7sec). However, to
take full advantage of the microscope’s live imaging capabilities, a proper setup of Nanolive’s top
stage incubator is necessary. The goal is to guarantee maximal experimental stability and to avoid
any stress to the cells while they are in the top stage incubator.
In this application note we will describe how to properly set up Nanolive’s top stage incubator such
that mammalian cells can be imaged over a long period of time (up to weeks). To achieve this, we
will guide you through the key steps for optimal humidity, CO2 and temperature control as well as
correct imaging regime. You should then be able to take advantage of the most impressive and
unmatched 3D Cell Explorer capability: long-term, high-frequency live imaging.
In this paper, we propose a new technique for implementing optimum controller for a conical tank. The objective of the controller is to maintain the level inside the process tank in a desired value. Hence an attempt is made in this paper as Internal Model Based PID controller design for conical tank level control. For each stable operating point, a first order process model was identified using process reaction curve method. The real time implementation is done in Simulink using MATLAB. The experimental results shows that proposed control scheme have good set point tracking and disturbance rejection capability.
In biological systems, all the conversion processes can take place quickly at relatively low temperatures and mild chemical conditions, because enzymes help to run the reactions with lower energy input.
Best Experimental Practices for Live Cell Imaging with the 3D Cell ExplorerMathieuFRECHIN
Nanolive’s 3D Cell Explorer allows for the creation of very powerful 3D images and 4D time-lapses
of living cells with very high spatio-temporal resolution (x,y:180nm; z:400nm; t:1.7sec). However, to
take full advantage of the microscope’s live imaging capabilities, a proper setup of Nanolive’s top
stage incubator is necessary. The goal is to guarantee maximal experimental stability and to avoid
any stress to the cells while they are in the top stage incubator.
In this application note we will describe how to properly set up Nanolive’s top stage incubator such
that mammalian cells can be imaged over a long period of time (up to weeks). To achieve this, we
will guide you through the key steps for optimal humidity, CO2 and temperature control as well as
correct imaging regime. You should then be able to take advantage of the most impressive and
unmatched 3D Cell Explorer capability: long-term, high-frequency live imaging.
In this paper, we propose a new technique for implementing optimum controller for a conical tank. The objective of the controller is to maintain the level inside the process tank in a desired value. Hence an attempt is made in this paper as Internal Model Based PID controller design for conical tank level control. For each stable operating point, a first order process model was identified using process reaction curve method. The real time implementation is done in Simulink using MATLAB. The experimental results shows that proposed control scheme have good set point tracking and disturbance rejection capability.
A Strategic Approach: GenAI in EducationPeter Windle
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
Biological screening of herbal drugs: Introduction and Need for
Phyto-Pharmacological Screening, New Strategies for evaluating
Natural Products, In vitro evaluation techniques for Antioxidants, Antimicrobial and Anticancer drugs. In vivo evaluation techniques
for Anti-inflammatory, Antiulcer, Anticancer, Wound healing, Antidiabetic, Hepatoprotective, Cardio protective, Diuretics and
Antifertility, Toxicity studies as per OECD guidelines
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.
Acetabularia Information For Class 9 .docxvaibhavrinwa19
Acetabularia acetabulum is a single-celled green alga that in its vegetative state is morphologically differentiated into a basal rhizoid and an axially elongated stalk, which bears whorls of branching hairs. The single diploid nucleus resides in the rhizoid.
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
Model Attribute Check Company Auto PropertyCeline George
In Odoo, the multi-company feature allows you to manage multiple companies within a single Odoo database instance. Each company can have its own configurations while still sharing common resources such as products, customers, and suppliers.
Macroeconomics- Movie Location
This will be used as part of your Personal Professional Portfolio once graded.
Objective:
Prepare a presentation or a paper using research, basic comparative analysis, data organization and application of economic information. You will make an informed assessment of an economic climate outside of the United States to accomplish an entertainment industry objective.
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...Dr. Vinod Kumar Kanvaria
Exploiting Artificial Intelligence for Empowering Researchers and Faculty,
International FDP on Fundamentals of Research in Social Sciences
at Integral University, Lucknow, 06.06.2024
By Dr. Vinod Kumar Kanvaria
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
The automatic hydroponics system with myDAQ
1. The result : Conclusion and discussion The automatic
The result of the automatic hydroponics
1.Get new innovation of the automatic hydroponics hydroponics system
system with myDAQ.
system with myDAQ by transform the
2.Get the automatic hydroponics system with
with myDAQ
solution concentrate of fertilizer solution myDAQ efficiently.
and test working control quantity of wa-
ter and fertilizer by using EC sensor as 3.Be able to take the automatic hydroponics
system with myDAQ apply in teaching activity.
the table:
The result of EC
Experiment
observing value
Step 1 Water pump doesn’t 0.5
work but fertilizer
Testing
solution pump work
EC value at
until EC value is 0.5,
0.5 by us-
the system will stop
ing buffer
working.
solution
at 0.35
Step 2 Water pump works, 0.25
fertilizer solution
Testing
pump doesn’t work
EC value at
until EC value is 0.25,
0.25 by
the system will stop
using buffer
working.
solution
at 0.35
Step 3 Water pump and fer- 0.35 Mr.Chaleam Bausing, Mrs. Jongol Bausing and
tilizer solution pump Mr.Satapisat Kraisee,
Testing
don’t work until EC Kanthararom School, Si Sa Ket Province, Thailand
EC value at
value is Tel +6645651143 Fax +6645651532
0.35 by
using buffer 0.35, the system will
solution stop working.
at 0.35
2. B ackground Materials Start
Disaster from Flooding in lately 2011 in A
Thailand caused many damages in hu- Microcontroller Set, Water pump, Time Set
Check (x)
man life especially products on agricul- Rubbers tube, Bucket, Sprout, Fertilizer false
ture. Because of Flooding for a long N P K according to type of formula
time we need to keep up with flooding planting, Equipments to create EC sen- For
and adjust to situation that will happen sor, Temperature sensor, Power supply Time>x
in the future. Hydroponics can control
true
factors which effect to plant growing. As
Read Tem,
a result, we get good quality of product. Read EC
The procedure produces need proficiency to
look after. By the way ,we take myDAQ to Show Tem (0C)
Show EC Meter
apply to developed the automatic hydro-
ponics system with myDAQ. It ‘s very
Set EC
useful to agriculturists and to adjust to control level
flood condition taking for long time.
true
If EC Meter PUMP Water ON
Objective Procedure to testing equipment > EC
To design and create the false
automatic hydroponics system
If ECMe- true
with myDAQ. ter < EC
PUMP CAME ON
To test the efficiency in work-
ing of the automatic hydroponics false
system with myDAQ.
false If EC Meter between
To take the automatic hydro-
ponics system with myDAQ for
teaching activity. true
All PUMP OFF
A
Stop