The document provides a collection of plumbing tips for aquarists, including:
- Choose slip fittings over threaded fittings whenever possible for fixed plumbing.
- Thoroughly test plumbing under normal conditions before adding living creatures.
- Avoid 90 degree elbows and instead use spa-flex hoses, sweeps, or two 45 degree elbows to turn corners.
- Plan plumbing runs ahead of time to avoid having to rework fittings after gluing.
Stop valve (SVA) is very efficient and cost effective product. are having comprehensive range of stop valves which is used in various applications from household to industrial purposes.
Everything you need to know about groundwater sampling pumps including types, specifications, pros and cons, common problems, how to decontaminate and supplies and accessories.
Pro‐Ox Iron Filter 1650 with Chlorine Side Tank Installation and Start Up GuideClean Water Systems
Step by step installation and start up guide for the Pro‐OX Iron Filter 1650 with Chlorine Side Tank, by Clean Water Systems.
View the product here:http://www.cleanwaterstore.com/iron-filters-mangox.html#item=FE011050&tab=tab1
View the complete installation guide here: http://www.cleanwaterstore.com/technical/water-treatment-guides/Iron_ProOX/1650-iron-filterstartup-chlorine-side-tank.pdf
For more products, how-to-guides, resources, and more, please visit: http://www.cleanwaterstore.com
How to Install Water Pump | Water Pump Installation - Pumpkart.comSoni Sharma
How to install a water pump professionally? Which tools you will require to fulfill this task? To know the answers about these queries, watch this PPT shared by Pumpkart.com and follow the provided directives! Before start fitting a water pump, must watch this PPT as it will help you to know the various truths that should be considered for hassle free installation.
Stop valve (SVA) is very efficient and cost effective product. are having comprehensive range of stop valves which is used in various applications from household to industrial purposes.
Everything you need to know about groundwater sampling pumps including types, specifications, pros and cons, common problems, how to decontaminate and supplies and accessories.
Pro‐Ox Iron Filter 1650 with Chlorine Side Tank Installation and Start Up GuideClean Water Systems
Step by step installation and start up guide for the Pro‐OX Iron Filter 1650 with Chlorine Side Tank, by Clean Water Systems.
View the product here:http://www.cleanwaterstore.com/iron-filters-mangox.html#item=FE011050&tab=tab1
View the complete installation guide here: http://www.cleanwaterstore.com/technical/water-treatment-guides/Iron_ProOX/1650-iron-filterstartup-chlorine-side-tank.pdf
For more products, how-to-guides, resources, and more, please visit: http://www.cleanwaterstore.com
How to Install Water Pump | Water Pump Installation - Pumpkart.comSoni Sharma
How to install a water pump professionally? Which tools you will require to fulfill this task? To know the answers about these queries, watch this PPT shared by Pumpkart.com and follow the provided directives! Before start fitting a water pump, must watch this PPT as it will help you to know the various truths that should be considered for hassle free installation.
In order to guide you, to know how to install a centrifugal pump, we (pumpkart.com) shares Presentation. By watching this presentation thoroughly, you can understand the process of centrifugal pump installation better. Pumpkart.com is committed to help its customers by providing all kind of support from guidance to delivery pumps at your step. At pumpkart you can choose a pump of your choice from the world famous pumps manufacturers at best prices.
7 basic valve questions to specify the correct valveDesign World
There are many factors to consider when specifying the correct valve for your application and every application is different. These conditions could be the media, temperature, compatibility, coil voltage, wattage, or explosion proof, even pressure ratings. All these considerations have an impact on specifying the correct valve to ensure millions of maintenance free cycles. This webinar will talk about the 7 valve questions you need to ask.
View this webinar to learn:
What questions to ask when specifying a Valve that is right for you.
How to get the most life from your solenoid valve because you accurately specked in your valve.
ECO Series Sharps Containers Manufacturer, Exporter from India
Solid and stable shape, Temporary and permanent closure facility easy to activate Translucent container. Ergonomic handle. Maximum filling level indicator. No emission of any harmful gasses during the incineration process
Ball valves are used in many industrial and house application to control the flow of gas, liquid, water etc. Indian ball valves manufacturers offering different types of ball valves design using new technologies.
What is stop valve
Stop valve (SVA) is very efficient and cost effective product. are having comprehensive range of stop valves which is used in various applications from household to industrial purposes.
Surge is often overlooked in hydraulic system design, but it is influenced by pumps, controls, valves, piping, and more. It is a mistake to overlook the huge impact of both surge and its close cousin, slam.
In order to guide you, to know how to install a centrifugal pump, we (pumpkart.com) shares Presentation. By watching this presentation thoroughly, you can understand the process of centrifugal pump installation better. Pumpkart.com is committed to help its customers by providing all kind of support from guidance to delivery pumps at your step. At pumpkart you can choose a pump of your choice from the world famous pumps manufacturers at best prices.
7 basic valve questions to specify the correct valveDesign World
There are many factors to consider when specifying the correct valve for your application and every application is different. These conditions could be the media, temperature, compatibility, coil voltage, wattage, or explosion proof, even pressure ratings. All these considerations have an impact on specifying the correct valve to ensure millions of maintenance free cycles. This webinar will talk about the 7 valve questions you need to ask.
View this webinar to learn:
What questions to ask when specifying a Valve that is right for you.
How to get the most life from your solenoid valve because you accurately specked in your valve.
ECO Series Sharps Containers Manufacturer, Exporter from India
Solid and stable shape, Temporary and permanent closure facility easy to activate Translucent container. Ergonomic handle. Maximum filling level indicator. No emission of any harmful gasses during the incineration process
Ball valves are used in many industrial and house application to control the flow of gas, liquid, water etc. Indian ball valves manufacturers offering different types of ball valves design using new technologies.
What is stop valve
Stop valve (SVA) is very efficient and cost effective product. are having comprehensive range of stop valves which is used in various applications from household to industrial purposes.
Surge is often overlooked in hydraulic system design, but it is influenced by pumps, controls, valves, piping, and more. It is a mistake to overlook the huge impact of both surge and its close cousin, slam.
Argentina appeals to different travelers on different levels. Some come for the urban delights of Buenos Aires, while others long to explore the wildlife of Patagonia
Top 10 Plumbing Inspections Every Single Home Owner Must Understand
garret65able
The very last thing you want is for your plumbing to give up unexpectedly, and for you to have to call out a plumber. Maintenance is cheap, but emergency call-out repairs may very well be highly-priced. By understanding how to carry out some basic inspections you can continue to keep your plumbing in tip top condition, and locate any possibly high-cost system failures before they occur. Follow out top ten tips so you're forewarned and forearmed!
Home Built Hydraulic Ram Pumps
`
For more information, Please see websites below:
`
Organic Edible Schoolyards & Gardening with Children =
http://scribd.com/doc/239851214 ~
`
Double Food Production from your School Garden with Organic Tech =
http://scribd.com/doc/239851079 ~
`
Free School Gardening Art Posters =
http://scribd.com/doc/239851159 ~
`
Increase Food Production with Companion Planting in your School Garden =
http://scribd.com/doc/239851159 ~
`
Healthy Foods Dramatically Improves Student Academic Success =
http://scribd.com/doc/239851348 ~
`
City Chickens for your Organic School Garden =
http://scribd.com/doc/239850440 ~
`
Huerto Ecológico, Tecnologías Sostenibles, Agricultura Organica
http://scribd.com/doc/239850233
`
Simple Square Foot Gardening for Schools - Teacher Guide =
http://scribd.com/doc/239851110 ~
Master The Art Of Garden Hose Reel Usage And Maintenance.pptxZephyr Watering
Empower your gardening experience with Zephyr Watering's tips on mastering the art of Garden Hose Reel usage and maintenance. Learn the ropes of efficient hose management and the key steps to keep your reel in top-notch condition. Trust Zephyr Watering to guide you through the process, ensuring your gardening tools are ready for seamless and effective use.
X2 Instructions
Congratulations
on your new X2 Filter
You have made a wise choice in choosing the X2 filter. Your filter was carefully
thought out and designed to give you many years of faithful, worry free service. Some
of the care and planning of your filter is self evident in even the small things, such as
the Lifetime Warranty on the tank itself. The tanks are made of the ultimate filter vessel
material, fiberglass. This is a higher quality tank than the typical plastic tank used on
many filters.
Your clear spring check valve for the X2 Media Agitator is designed so in time
(normally many, many years) when the check valve goes out you can simply unscrew
the union and replace just the valve seat itself in just a few minutes.
Your Multiport valves were carefully chosen to be the least restrictive backwash valve on the market to give maximum flows for the least energy dollars. The internals were carefully designed with maximum flows in mind to give further energy savings, by allowing you to use the most energy efficient pumps on the market.
The X2 Life Support System allows you to hook up a koi pond air pump to the
supplied fitting on the front of the multiport valve and supply life giving oxygen to the
filter bacteria during times of medical bypass or pump failure.
The X2 Media Agitator is a high quality air blower that injects huge amounts of
air into the vessel prior to backwash, this breaks up the bead pack which allows for a
very thorough backwash.
Kitchen Garbage disposals are efficient, safe and virtually trouble-free devices that anyone who knows how to use a screwdriver and wrench can install it in a few hours. i
1. Hot Tips: Plumbing Tips — Advanced Aquarist
A selection of useful tidbits of information for the aquarist. Readers are encouraged to send their
tips to terry@advancedaquarist.com or to post them to our Hot Tips sticky in the Reefs.org General
Reefkeeping Discussion forum for possible publication. Next month's Hot Tip theme will be
"Powerhead Hiding Tips".
Choose slip and clamped barb fittings over threaded fittings for fixed plumbing whenever possible.
2. Use the specified adhesive(s) for the material you're gluing (spa flex and rigid PVC use slightly
different glues, for instance) and follow all of the recommended steps (prime, glue, slip with a twist,
hold; etc.). If you can, attend a Home Depot workshop on home plumbing when you know they'll be
covering PVC.
Test all of your plumbing under normal operating conditions, preferably for several days, before
subjecting any living thing to dealing with it. I like using food-safe dyes in fresh water to help find
any leaks during these tests.
Try not to turn too many corners in a plumbing run, and if you must turn a corner, don't use a 90
degree elbow unless you absolutely have to. Use spa- flex (flexible PVC hose), a sweep (a rigid PVC
pipe with a large radius bend in it), or two 45 degree elbows... but avoid 90 degree elbows where
possible.
When plumbing with spa-flex (flexible PVC hose), it will almost always have a "set" that follows the
curve it got when it was wrapped around the roll during manufacturing. Don't try to fight this "set",
instead try to use the bend it already has to your advantage.
Plan your plumbing ahead so that you don't have to wedge it or bend it after gluing to keep it where
you want it. Once attached, vertical runs should end up exactly where they're needed without any
additional support and longer horizontal runs should only require the occasional strap to keep them
from bending under their weight.
Test-fit your plumbing before gluing anything.
If you make a mistake with slip fittings, it is possible to drill out the pipe in the fitting and try again,
but it will almost certainly be simpler and less trouble to buy more fittings and pipe. Test-fitting your
plumbing before gluing anything should prevent most of the "go back and buy more" type mistakes.
On any bulkhead that leads to or from external equipment (return pump, skimmer, etc.) make sure
that there is a ball valve very close to the bulkhead and a union on the other side of the ball valve. A
3. true-union ball valve is even better. You'll eventually need to disconnect the pump or skimmer for
repair/maintenance/replacement and this will let that happen with little mess and no fuss.
On the output line of return pumps, put a union and then a ball and/or gate valve close to the pump
where you can get to them. A gate valve is better for throttling the return flow, the ball valve is
faster to turn off and less hassle if you don't need to throttle the flow. Again, this allows you to
disconnect and repair/maintain/replace the pump without disrupting your aquarium.
If you have an in-stand sump, have a plan for how to get the sump out of the stand without tearing
the tank and stand apart. Smart placement of unions is again the not-so-secret trick. The litmus test
is to complete all of your gluing with the sump outside of the stand, fill the main tank, and then move
the sump into place. Only after the sump is placed under the stand do you actually complete the
various assemblies (these final steps should not use any glue icon_smile.gif ). If you can get it in, it's
likely you can get it out later. Do not try to momentarily pull on or otherwise force things to get the
sump in or out of the stand. You will probably weaken joints and cause leaks.
Do not put restrictions in drains. Even though it's a good idea to have a ball valve to shut down a
drain for tank maintenance, throttling a drain with a partially closed valve is a bad idea. Something
will eventually catch in the restriction (snails are famous for this, with hair algae the next most likely
culprit) and your drain will clog. Unless you have a second drain that can handle the full flow, your
return pump will continue to pump the contents of the sump back up to the main tank and the main
tank will overflow.
Use of a standpipe (Durso, Stockman, etc.) can be great for quieting overflow boxes and their drains.
Don't glue the parts of a standpipe together as you'll want to make occasional adjustments.
Once water starts flowing through your plumbing it will be a little noisy. Once the pipes accumulate
a little slime inside (a week to ten days of running salt water through them) this will quiet down a
lot. Be patient and buy some earplugs in the meantime.
Quiet a noisy external pump with a neoprene mousepad or two (a good idea for any external pump
actually).
-- Ross ("rabagley")
Wrap neoprene pipe insulation around the drain pipes to quiet the noise.
Remember to clean the inside edges of PVC pipe where you cut it - the little burrs etc... WILL catch
debris that goes down the drain.
Use a gate valve instead of a ball valve - a ball valve will eventually clog with calcium and become
impossible to close.
To clean items like an inline chiller or powerhead simply run it in water with vinegar.
Drill a couple of holes in the bottom of the flexible water pipe (where the water enters the tank from
the sump) to prevent back siphon when the power goes out - even better is make sure this is just at
the normal water level and it will break siphon automatically when the water level drops a little.
For long return plumbing a very slight drop is all that is required - say 1 inch per 10 feet - you are
not trying to move solids like in normal waste plumbing just return the water as quietly and as
4. gently as possible
To quiet the returm from a skimmer into a sump instead of letting it exhaust straight into the sump
use a perforated pipe - it will not impede the water flow and will eliminate the splashing noise.
-- "shellshocked"
If you put a bulkhead at 4" below the top of the tank, and then put a Tee on the outside of the tank
with a cap on top with a hole, and a hose on bottom running to your sump, you will almost have a
durso standpipe. The only part you are missing is the elbow inside the tank pointing down.
-- "knucklehead"
I like to use clear PVC glue and primer instead of the blue/purple color version. Works just as well
and looks alot neater when done.
-- "tgallo"
Plan your plumbing out 1ST. Make a list of every thing you need then add atleast one more of every
item on that list.(for smaller parts like elbows add like 3 more). You can always retrun items that are
not used. There is nothing more aggravating then having to run up to the store to buy a .25
plubming fitting. Once you have all the parts you will need "dry fit" them (no glue). Once your happy
with how that looks, start glueing from the tank down.
-- "TJG"
Valves Unions:
Always buy threaded valves (not slip unless you never plan on modifying your setup) they are a
couple of dollars more each, but they can be reused and reconfigured endlessly.
Tubing / pipe:
I prefer to use vinyl flexible tubing as much as possible. It is inexpensive, easy to work with and
doesn't require alot of elbows to get where you need to go.
If the tubing kinks when you're trying to make a tight radius use several metal hose clamps to hold
the tubing's shape.
5. Placing the tubing in a bathtub with very hot water makes it more flexible and easier to work with.
When dry fitting rigid PVC pipe mark the connections with a Sharpie marker by making a line across
the pipe and fitting. When glueing the joints, rotate the pipe so the marks align.
And last but not least:
You can get anywhere you need to go with three (3) 45 degree elbows.
-- "jcurry@wesketch"
Always measure twice if not three times!
Buy a good pair of pipe cutters. These make a nice smooth cut and no mess from hacksaws. Also,
great for cutting tubing.
If you end up using clear tubing in your plumbing, wrap with electrical or duct tape to prevent algae
growth within your lines.
A nifty backflow preventative for those that plumb your return to bulkheads is to plumb your lines
first above the waterline of the tank. Then plumb back down to the bulkheads. Insert a tee in the
portion above the waterline and add a John-Guest or other speed fitting for 1/4" tube. Run the tube
to your overflow or anywhere else that it will spray into the tank and not outside. Now when your
pumps stop your tank won't drain to the level of the bulkheads because the tubing will draw in air
and break the siphon and the water will stay the level of your returns or the level of your tank, which
ever is lower.
-- "Modo"
You can maximize the efficiency of your water pump by always full port valves and PVC fittings,
increase the size of your intake pipe, and not use a prefilter that would restrict flow. Provide 24" or
more of piping from the pump's outlet without any fittings or valves. Annually remove your pump's
impeller and give it a good cleaning. Look for signs your pump may be ready to fail, rattling,
squeeling, and increased heating. When installing a new pump, never overtighten the fittings, you
could damage the fitting, and the pump. Use teflon tape on the threads, and tighten hand tight, and
then 1/4 with a wrench.
-- "hillbilly"
6. Use vegetable oil as a lube to get tight-fitting flexible tubing onto barbed fittings.
-- "Save_the_Expos"
These tips and more can be found in the Reefs.org Archives.
http://www.advancedaquarist.com/2004/7/tips