This document provides specifications for UC Series Ironless linear motors made by Tecnotion BV. It describes the dimensions and technical specifications for magnet yoke and coil unit models UC3, UC6, and UC264. Key details include the mass and length of each model, maximum force and speed capabilities, electrical properties like current and resistance, and mechanical properties such as weight and bending radii for power cables. Mounting instructions and CAD files can be found in the Ironless installation manual on Tecnotion's website.

1. Ver.1.03
©2013 Tecnotion BV - All rights reserved - The contents of this document are subject to change without prior notice.
UC3 in 99mm magnet yoke shown
UC Series Ironless
Magnet yoke dimensions
Le (mm) 66 99 264
M4 bolts 2 3 8
Mass (kg/m) 3.2
Magnet yokes can be butted together.
Parameter Remarks Symbol Unit UC3 UC6
Performance
Motortype, max voltage ph-ph 3-phase synchronous Ironless, 45Vac rms (60Vdc)
Peak Force @ 20°C/s increase magnet @ 25°C Fp N 36 72
Continuous Force* coils @ 80°C Fc N 10 20
Maximum Speed** @ 60 V vmax m/s 5 5
Motor Force Constant mount. sfc. @ 20°C K N/Arms 11.4 11.4
Motor Constant coils @ 25°C S N2
/W 9.2 18.3
Electrical
Peak Current magnet @ 25°C Ip Arms 3.1 6.2
Maximum Continuous Current coils @ 80°C Ic Arms 0.87 1.75
Back EMF Phase-Phasepeak Bemf V / m/s 9.3 9.3
Resistance per Phase* coils @ 25°C ex. cable Rf Ω 4.7 2.4
Induction per Phase I < 0.6 Ip Lf mH 0.75 0.38
Electrical Time Constant* coils @ 25°C τe ms 0.16 0.16
Thermal
Maximum Continuous Power Loss all coils Pc W 13 26
Thermal Resistance coils to mount. sfc. Rth °C/W 3.6 1.8
Thermal Time Constant* to max. coil temp. τth s 25 25
Temperature Sensors none none
Mechanical
Coil Unit Weight ex. cables W kg 0.031 0.062
Coil Unit Length ex. cables L mm 34 67
Motor Attraction Force Fa N 0 0
Magnet Pitch NN τ mm 16.5 16.5
Cable Mass m kg/m 0.07 0.07
Cable Type (Power) length 1 m d mm (AWG) 4.3 (24)
Cable Type (Sensor) N/A
Cable Life (Power FLEX)*** minimum 15,000,000 cycles
Bending Radius Static minimum 5x cable diameter
Bending Radius Dynamic minimum 8x cable diameter
** Actual values depend on bus voltage. Please check the F/V diagram in our simulation tool.
Allspecifications±10%
* These values are only applicable when the mounting surface is at 20°C and the motor is driven at maximum continuous current. If these values differ in your application, please check our simulation tool.
UXAULUMUC UF UXX
*** Depending on Bending Radius, Velocity and Acceleration.
Approvals
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By:

2. Ver.1.01
©2013 Tecnotion BV - All rights reserved - The contents of this document are subject to change without prior notice.
ADETAIL A
59
67
3 28
34
10.58
4
25
Lc
3M (7.5 deep, 2x)
M3(3deep,2x)
4
5
43
14.8
0.93 13.5 0.38
2.5 (2x)
7.5
51
33 33 33 33 33
UC 3 UC 6
Lc 18.5 51.5
UC264mm
UC3
UC6
Power Cable (mm) Digital Hall Module Cable (mm)
UC 3 Ø4.3 Ø3.2
UC 6 Ø4.3 Ø3.2
3M(5.5deep,2x)
UC66mm
18.5
Optional: Digital Hall Module
Hole O3 (2x)
For Dowelpin DIN7 O3h8
(Optional use)
4.5
O 4.5 (for M4 DIN 912)
O 7.5 (3 deep)
2xUC99mm
264max
24.7 214.5
8.25
33 33
66max
24.7 49.5
8.25
33 33
4
99
49.5
33 33 33
99max
16.524.7
8.25
33
MAGNET YOKES COIL UNITS
4.3O
7.5
18.511.758
3M (7.5 deep, 2x)
3M(5.5deep,2x)
7.75
Dig. Hall cable (mm) Lc (mm)
UC3 Ø3.2 18.5
UC6 Ø3.2 51.5
Mountinginstructionsandflatnessorparallelismrequirements
canbefoundintheIronlessinstallationmanual.CADfilesand
3Dmodelscanbedownloadedfromourwebsite.
UXAULUMUC UF UXX
ELECTROMATE
Toll Free Phone (877) SERVO98
Toll Free Fax (877) SERV099
www.electromate.com
sales@electromate.com
Sold & Serviced By: