This lecture provides an introduction to some of the finer points in the production of high quality castings. The students will be able to understand the various processes for sealing porosity in badly made castings and to appreciate factors influencing the accuracy of castings, including a basic understanding of how to control and measure casting dimensions. Basic understanding of the foundry industry is assumed.
This lecture provides an introduction to factors affecting the quality of molten aluminium. Basic knowledge of foundry practice is assumed. The student should be able to appreciate the differences between good and bad melting practices in a foundry.
TALAT Lecture 3207: Solidification Defects in CastingsCORE-Materials
This lecture provides an introduction to the causes and remedies of the main solidification defects in castings. The students should be able to diagnose the major defects in castings and propose methods of preventing them. Basic knowledge of physics and foundry practice is assumed.
This lecture describes the function and design of all parts of the running and gating systems used in the production of castings. The students will be able to tackle the design of a simple running system in a systematic manner. Basic knowledge of foundry processes and basic mathematics is assumed.
TALAT Lecture 3205: The Fluidity of Molten MetalsCORE-Materials
This document provides an overview of fluidity in molten metals and its influence on casting processes in 3 sentences:
Fluidity refers to the distance molten metal will flow in a test mold before solidifying, and is influenced by factors like alloy composition, section thickness, and heat transfer characteristics; short freezing range alloys solidify from the outside in, while long freezing range alloys form a slurry when the dendrite fraction reaches 25-50%; fluidity maps show how fluidity varies with composition, being highest for pure metals and eutectic compositions.
TALAT Lecture 3201: Introduction to Casting TechnologyCORE-Materials
This lecture provides an introduction to the techniques used to produce castings and to the range of castings produced; it aims at gaining an appreciation of the production and application of castings.
TALAT Lecture 1202: Metallography of Aluminium AlloysCORE-Materials
This lecture aims at providing a survey of the metallographic techniques available for the examination of aluminium and its alloys. The information must be sufficient to be sure that the students and the users are able to choose the most suitable technique to solve their problems in the examination of samples. The lecture should contain a direct understanding of the main problems in the metallography of the different classes of aluminium materials.
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.
This document summarizes key aspects of three metal casting methods: sand casting, investment casting, and die casting. It covers the basic processes, materials used, tolerances, surface finishes, design considerations, solidification and heat transfer principles, variations and developments in the technologies, and potential environmental issues. The goal is to provide an overview of the fundamentals and tradeoffs of different casting approaches.
This lecture provides an introduction to factors affecting the quality of molten aluminium. Basic knowledge of foundry practice is assumed. The student should be able to appreciate the differences between good and bad melting practices in a foundry.
TALAT Lecture 3207: Solidification Defects in CastingsCORE-Materials
This lecture provides an introduction to the causes and remedies of the main solidification defects in castings. The students should be able to diagnose the major defects in castings and propose methods of preventing them. Basic knowledge of physics and foundry practice is assumed.
This lecture describes the function and design of all parts of the running and gating systems used in the production of castings. The students will be able to tackle the design of a simple running system in a systematic manner. Basic knowledge of foundry processes and basic mathematics is assumed.
TALAT Lecture 3205: The Fluidity of Molten MetalsCORE-Materials
This document provides an overview of fluidity in molten metals and its influence on casting processes in 3 sentences:
Fluidity refers to the distance molten metal will flow in a test mold before solidifying, and is influenced by factors like alloy composition, section thickness, and heat transfer characteristics; short freezing range alloys solidify from the outside in, while long freezing range alloys form a slurry when the dendrite fraction reaches 25-50%; fluidity maps show how fluidity varies with composition, being highest for pure metals and eutectic compositions.
TALAT Lecture 3201: Introduction to Casting TechnologyCORE-Materials
This lecture provides an introduction to the techniques used to produce castings and to the range of castings produced; it aims at gaining an appreciation of the production and application of castings.
TALAT Lecture 1202: Metallography of Aluminium AlloysCORE-Materials
This lecture aims at providing a survey of the metallographic techniques available for the examination of aluminium and its alloys. The information must be sufficient to be sure that the students and the users are able to choose the most suitable technique to solve their problems in the examination of samples. The lecture should contain a direct understanding of the main problems in the metallography of the different classes of aluminium materials.
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.
This document summarizes key aspects of three metal casting methods: sand casting, investment casting, and die casting. It covers the basic processes, materials used, tolerances, surface finishes, design considerations, solidification and heat transfer principles, variations and developments in the technologies, and potential environmental issues. The goal is to provide an overview of the fundamentals and tradeoffs of different casting approaches.
This document discusses soldering and welding techniques. It begins by introducing the topic and providing context. It then discusses the different categories of soldering, brazing, and welding. The document goes into detail about various soldering techniques used in dentistry, including free hand soldering and investment soldering. It describes the components involved in soldering like parent metals, fluxes, and filler metals. Key factors for optimal soldering are also outlined such as joint design and temperature control. Overall, the document provides a comprehensive overview of soldering and welding processes for joining dental materials and appliances.
Stainless steel soldering & welding /certified fixed orthodontic courses by I...Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and offering a wide range of dental certified courses in different formats.
Indian dental academy provides dental crown & Bridge,rotary endodontics,fixed orthodontics,
Dental implants courses.for details pls visit www.indiandentalacademy.com ,or call
0091-9248678078
This document defines dental amalgam and describes its composition and properties. Amalgam is an alloy of silver, tin, and copper combined with liquid mercury. It exists in different types based on copper content and zinc content. Spherical alloy particles are easier to place than irregularly shaped lathe-cut particles. Fine-cut particles between 10-30 microns provide improved strength and adaptation over micro-cut or coarse-cut particles. Composition affects properties - conventional amalgam is strongest while high-copper amalgam provides greater corrosion resistance and strength development.
This document discusses various types of cracking that can occur in welds, including centerline cracking, heat affected zone cracking, and transverse cracking. It describes the causes and conditions required for each type of cracking, such as solidification processes, residual stresses, and hydrogen embrittlement. Prevention methods are also covered, like preheating materials, controlling hydrogen levels, and using filler metals designed to prevent cracking. The document provides detailed information on characterizing weld microstructures and properties to evaluate cracking tendencies.
This document discusses oxide dispersion strengthened austenitic stainless steel. It begins with an introduction to stainless steels and austenitic stainless steels. It then explains how oxide dispersion strengthening works and the process used to produce these steels. Comparisons are made between the properties of oxide dispersion strengthened steels and non-oxide dispersion strengthened steels. The document also discusses the microstructure, applications, advantages, disadvantages and concludes with references.
Processes based on fluidity and solidification, or simply “casting”, include manufacturing techniques whereby molten material is poured or forced into a mould and allowed to harden. Appropriate variants of this technique are particularly suitable for the economical production of complex shapes, ranging from mass-produced parts for the automotive industry to one-of-a-kind production of jewellery or massive machinery.
Soldering procedures /certified fixed orthodontic courses by Indian dental ac...Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and offering a wide range of dental certified courses in different formats.
Indian dental academy provides dental crown & Bridge,rotary endodontics,fixed orthodontics,
Dental implants courses.for details pls visit www.indiandentalacademy.com ,or call
0091-9248678078
This document provides an overview of welding metallurgy. It discusses the microstructure of welds and how the rapid changes in temperature during welding affect the physical characteristics and properties of metals. It examines the different zones that form in steel welds, including the fusion zone where grains are epitaxially formed, and the heat-affected zone. Problems that can occur during welding due to remelting and solidification are also summarized, such as macrosegregation, hot cracking, and cold cracking.
1) Dental amalgam is a mixture of liquid mercury and a silver alloy powder composed of silver, tin, and copper, sometimes with zinc. When the alloy powder and mercury are mixed through the amalgamation process, it forms a malleable plastic mass that can be condensed into a cavity.
2) There are different types of amalgam depending on factors like copper and zinc content, particle shape and size. Spherical particles are preferred as they require less mercury, amalgamate more easily and have better early strength.
3) Potential disadvantages include dimensional changes during setting, creep over time, inadequate tensile strength, low edge strength, thermal conductivity and corrosion; but proper manipulation can minimize many of these issues.
This document provides information on various metalworking processes including cold working, hot working, rolling, extrusion, casting, and heat treatments. It discusses:
1) Cold working processes like rolling, drawing, and pressing that permanently deform and strengthen metals below the recrystallization temperature.
2) Hot working processes like forging, rolling, and extrusion that deform metals above the recrystallization temperature for easier shaping.
3) The sand casting process which is used to produce small quantities of identical castings through the use of sand molds. Molten metal is poured into a mold cavity and allowed to solidify.
Metal casting involves pouring liquid metal into a mold to produce parts of a desired shape. The key steps are melting metal to create a liquid, pouring it into a mold to achieve a solid shape as it cools and extracts heat, and then removing the solidified part from the mold. The quality of castings depends on factors like the flow of molten metal into the mold, the solidification and cooling process, and the type of mold material used. Common casting methods include sand casting, die casting, and investment casting.
The document summarizes corrosion of weldments. It discusses the microstructure of weldments and the distinct regions that form. It then covers the various forms of weld corrosion including galvanic, pitting, crevice, intergranular, stress corrosion, and hydrogen cracking. Factors that influence weld corrosion like material selection and welding parameters are presented. Testing methods for weld corrosion like linear polarization resistance and corrosion potential measurements are briefly described.
Aluminum Cast Alloys - World Wide ReportHobby Foundry
The document discusses the fundamentals of aluminum cast alloys, including the effects of major alloying elements. It explains that silicon is the most important alloying element in most alloys, as it improves castability by increasing fluidity and allowing for isothermal solidification. Copper and magnesium are also major alloying elements that can enhance properties like strength. Minor elements, microstructure modifiers, and impurities are classified and their roles outlined. Overall, the document provides an overview of aluminum alloy composition and how different elements affect characteristics.
Cobalt-chromium, nickel-chromium, and titanium alloys are commonly used as alternatives to gold alloys for dental casting. Cobalt-chromium alloys contain cobalt, chromium, and molybdenum as major elements, while nickel-chromium alloys contain nickel, chromium, and molybdenum. Titanium can be used in pure form or as alloys to stabilize its crystal structure. These base metal alloys have higher strength and modulus of elasticity than gold, but are less ductile. They provide excellent corrosion resistance due to the formation of a passive oxide layer on the surface. Casting of titanium and titanium alloys requires special techniques and equipment due to their high melting temperatures and low density
This document discusses dental investment materials and procedures used for lost wax casting. It begins with an introduction and history of lost wax casting. It then defines dental investment and discusses the requirements, material science, and types of investments including composition, setting reactions, and properties. The document outlines the investing procedure and potential defects. It concludes with an overview of dental investment materials for lost wax casting.
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
The document discusses different metal joining techniques used in dentistry including soldering, brazing, and welding. It defines these terms and describes the key components and process of soldering including parent metals, filler metals, fluxes, heat sources, and techniques. Soldering is commonly used in orthodontics to join wires, springs, and other appliance components using low-temperature silver solders and fluoride fluxes with a gas torch.
This document discusses soldering and welding techniques. It begins by introducing the topic and providing context. It then discusses the different categories of soldering, brazing, and welding. The document goes into detail about various soldering techniques used in dentistry, including free hand soldering and investment soldering. It describes the components involved in soldering like parent metals, fluxes, and filler metals. Key factors for optimal soldering are also outlined such as joint design and temperature control. Overall, the document provides a comprehensive overview of soldering and welding processes for joining dental materials and appliances.
Stainless steel soldering & welding /certified fixed orthodontic courses by I...Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and offering a wide range of dental certified courses in different formats.
Indian dental academy provides dental crown & Bridge,rotary endodontics,fixed orthodontics,
Dental implants courses.for details pls visit www.indiandentalacademy.com ,or call
0091-9248678078
This document defines dental amalgam and describes its composition and properties. Amalgam is an alloy of silver, tin, and copper combined with liquid mercury. It exists in different types based on copper content and zinc content. Spherical alloy particles are easier to place than irregularly shaped lathe-cut particles. Fine-cut particles between 10-30 microns provide improved strength and adaptation over micro-cut or coarse-cut particles. Composition affects properties - conventional amalgam is strongest while high-copper amalgam provides greater corrosion resistance and strength development.
This document discusses various types of cracking that can occur in welds, including centerline cracking, heat affected zone cracking, and transverse cracking. It describes the causes and conditions required for each type of cracking, such as solidification processes, residual stresses, and hydrogen embrittlement. Prevention methods are also covered, like preheating materials, controlling hydrogen levels, and using filler metals designed to prevent cracking. The document provides detailed information on characterizing weld microstructures and properties to evaluate cracking tendencies.
This document discusses oxide dispersion strengthened austenitic stainless steel. It begins with an introduction to stainless steels and austenitic stainless steels. It then explains how oxide dispersion strengthening works and the process used to produce these steels. Comparisons are made between the properties of oxide dispersion strengthened steels and non-oxide dispersion strengthened steels. The document also discusses the microstructure, applications, advantages, disadvantages and concludes with references.
Processes based on fluidity and solidification, or simply “casting”, include manufacturing techniques whereby molten material is poured or forced into a mould and allowed to harden. Appropriate variants of this technique are particularly suitable for the economical production of complex shapes, ranging from mass-produced parts for the automotive industry to one-of-a-kind production of jewellery or massive machinery.
Soldering procedures /certified fixed orthodontic courses by Indian dental ac...Indian dental academy
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and offering a wide range of dental certified courses in different formats.
Indian dental academy provides dental crown & Bridge,rotary endodontics,fixed orthodontics,
Dental implants courses.for details pls visit www.indiandentalacademy.com ,or call
0091-9248678078
This document provides an overview of welding metallurgy. It discusses the microstructure of welds and how the rapid changes in temperature during welding affect the physical characteristics and properties of metals. It examines the different zones that form in steel welds, including the fusion zone where grains are epitaxially formed, and the heat-affected zone. Problems that can occur during welding due to remelting and solidification are also summarized, such as macrosegregation, hot cracking, and cold cracking.
1) Dental amalgam is a mixture of liquid mercury and a silver alloy powder composed of silver, tin, and copper, sometimes with zinc. When the alloy powder and mercury are mixed through the amalgamation process, it forms a malleable plastic mass that can be condensed into a cavity.
2) There are different types of amalgam depending on factors like copper and zinc content, particle shape and size. Spherical particles are preferred as they require less mercury, amalgamate more easily and have better early strength.
3) Potential disadvantages include dimensional changes during setting, creep over time, inadequate tensile strength, low edge strength, thermal conductivity and corrosion; but proper manipulation can minimize many of these issues.
This document provides information on various metalworking processes including cold working, hot working, rolling, extrusion, casting, and heat treatments. It discusses:
1) Cold working processes like rolling, drawing, and pressing that permanently deform and strengthen metals below the recrystallization temperature.
2) Hot working processes like forging, rolling, and extrusion that deform metals above the recrystallization temperature for easier shaping.
3) The sand casting process which is used to produce small quantities of identical castings through the use of sand molds. Molten metal is poured into a mold cavity and allowed to solidify.
Metal casting involves pouring liquid metal into a mold to produce parts of a desired shape. The key steps are melting metal to create a liquid, pouring it into a mold to achieve a solid shape as it cools and extracts heat, and then removing the solidified part from the mold. The quality of castings depends on factors like the flow of molten metal into the mold, the solidification and cooling process, and the type of mold material used. Common casting methods include sand casting, die casting, and investment casting.
The document summarizes corrosion of weldments. It discusses the microstructure of weldments and the distinct regions that form. It then covers the various forms of weld corrosion including galvanic, pitting, crevice, intergranular, stress corrosion, and hydrogen cracking. Factors that influence weld corrosion like material selection and welding parameters are presented. Testing methods for weld corrosion like linear polarization resistance and corrosion potential measurements are briefly described.
Aluminum Cast Alloys - World Wide ReportHobby Foundry
The document discusses the fundamentals of aluminum cast alloys, including the effects of major alloying elements. It explains that silicon is the most important alloying element in most alloys, as it improves castability by increasing fluidity and allowing for isothermal solidification. Copper and magnesium are also major alloying elements that can enhance properties like strength. Minor elements, microstructure modifiers, and impurities are classified and their roles outlined. Overall, the document provides an overview of aluminum alloy composition and how different elements affect characteristics.
Cobalt-chromium, nickel-chromium, and titanium alloys are commonly used as alternatives to gold alloys for dental casting. Cobalt-chromium alloys contain cobalt, chromium, and molybdenum as major elements, while nickel-chromium alloys contain nickel, chromium, and molybdenum. Titanium can be used in pure form or as alloys to stabilize its crystal structure. These base metal alloys have higher strength and modulus of elasticity than gold, but are less ductile. They provide excellent corrosion resistance due to the formation of a passive oxide layer on the surface. Casting of titanium and titanium alloys requires special techniques and equipment due to their high melting temperatures and low density
This document discusses dental investment materials and procedures used for lost wax casting. It begins with an introduction and history of lost wax casting. It then defines dental investment and discusses the requirements, material science, and types of investments including composition, setting reactions, and properties. The document outlines the investing procedure and potential defects. It concludes with an overview of dental investment materials for lost wax casting.
The Indian Dental Academy is the Leader in continuing dental education , training dentists in all aspects of dentistry and
offering a wide range of dental certified courses in different formats.for more details please visit
www.indiandentalacademy.com
The document discusses different metal joining techniques used in dentistry including soldering, brazing, and welding. It defines these terms and describes the key components and process of soldering including parent metals, filler metals, fluxes, heat sources, and techniques. Soldering is commonly used in orthodontics to join wires, springs, and other appliance components using low-temperature silver solders and fluoride fluxes with a gas torch.
This lecture provides an introduction to solidification theory; it aims at achieving an essential background understanding of solidification and cast structures. Basic knowledge of the solidification of metals is assumed.
This document provides an introduction to techniques for compensating for solidification shrinkage in castings. It outlines seven rules for designing effective feeder systems:
1) The feeder must solidify at the same time or later than the casting (Chvorinov's rule).
2) The feeder must contain sufficient liquid to satisfy the volume contraction of the casting.
3) The junction between the casting and feeder must not create a hot or cold spot.
4) There must be a path for feed metal to reach all parts of the casting.
5) The feeder design must consider pressure requirements.
6) There must be an appropriate pressure gradient in the feed
TALAT Lecture 1501: Properties, Characteristics and Alloys of AluminiumCORE-Materials
This document provides a 60-page survey of aluminium alloys, their properties, and applications. It discusses the history and production of aluminium, important physical properties including density, conductivity, corrosion resistance, and melting temperature. It also describes the classification systems for wrought and cast aluminium alloys and provides information on common alloys and their mechanical properties and applications. The objectives are to provide information on available aluminium alloys and insights into choosing aluminium for applications.
TALAT Lecture 2101.01: Understanding aluminium as a materialCORE-Materials
This lecture is an introduction to aluminium alloys, fabrication methods and properties. It provides information about the classification of aluminium alloys, new alloys and composites; shaping processes, processing chains and component shapes; microstructure and the interaction between microstructure and properties. It promotes understanding of the fact that the correct choice of materials demands knowledge of alloys, shaping processes and microstructure and the interaction among them. The lecture is recommended for those situations, where a brief, general background information about aluminium is needed as an introduction of other subject areas of aluminium application technologies. This lecture is part of the self-contained course "Aluminium in Product Development", which is treated under TALAT lectures 2100.
This document provides an overview of continuous casting of aluminium, specifically focusing on strip casting and wire bar casting technologies. It describes the basic principles of continuous casting, including key features like using rotating drums or belts to form a mould for molten aluminium. It discusses different types of casters like twin drum casters, single drum casters, and those using belts or blocks. It also addresses properties of continuously cast products and their behavior in further processing like rolling. The document aims to give readers an understanding of the possibilities and limitations of continuous casting aluminium.
ADVANCED TECHNIQUES IN CASTING DEFECTS AND REJECTION ANALYSIS: A STUDY IN AN ...ijiert bestjournal
Casting process is the most widely used process in manufacturing industries especially in automotive products. Production of casting involves various pr ocesses like pattern making,molding,and core maki ng and melting. It is very difficult to produce defect fre e castings. A defect may be the result of a single cause or a combination of causes. The castings may have one or more defects. Foundries are still using trial and error methods to solve quality problems. There are benefi ts of using a more disciplined approach to define,identify and determine the root cause of the defect which is an expensive and error-prone process. This project is about new devolvement for identification of defects for 4 R cylinder block which is presently having a 40% or more percent rejection in Kirloskar ferrous industrial l td,Solapur. This project also presents a methodolo gy in rejection level percent by using scientific study o n casting defects. Various casting quality improvement techniques such as;P roduct Process Search analysis (PPS) Inspection method,Design of Experiment (DOE),and by using a Casting simulation software and by finding out the c ause-effect diagram. This project presents a review on literature of different methods adopted by many foundries to reduce the percent of rejecti on. A new approach is proposed which may be helpful for f oundries for controlling and reducing the defects.
This document provides guidance on troubleshooting defects that occur during the batch vacuum metallization process. It discusses common sources of defects such as humidity, dust, and part design issues. The key recommendations are:
1) Troubleshoot defects while parts are still on the carriage to determine the location of defects within the chamber.
2) Maintain records of process parameters to identify variables when defects first occur.
3) Check for sources of leaks or outgassing near defective parts to identify environmental causes of burned or discolored coatings.
Casting Defects Analysis in Foundry and Their Remedial Measures with Industri...iosrjce
In this current scenario of globalization, foundries play a key role for manufacturing industries as
they are the major source of castings. As a key industry a foundry’s performance should be effectively high in
terms of production with minimum number of rejections. Castings are the major inputs for most industrial
products hence foundry industry is most indispensable. Casting is an integrated process considered as an
artwork with experienced professionals for high quality yield, even then in highly controlled environment
defects are dominant to take place leading to rejections, contrary to rejections a foundry’s key attempt is to
satisfy the demands neglecting quality levels. The challenges of casting defects are to be identifiedand
minimized for effective castings. This study provides an intense knowledge of critical casting defects and their
root cause analysis. In this paper efforts are made to achieve technically feasible remedies for minimizing
several casting defects and improving the quality of castings which will serve as control measures for quality
control professionals with zero defect concepts
Weld Defects and Material Properties - PaperBrett Leary
This document summarizes research on common weld defects including inclusions, cracks, and incomplete fusion/penetration. It discusses the causes, effects, prevention methods, and detection techniques for each type of defect. Key points include: porosity and slag are common inclusion defects caused by contamination; cracks are caused by residual stresses from welding and can reduce fatigue strength; and incomplete fusion/penetration occur when the weld does not fully melt and fuse the materials together. Prevention focuses on cleanliness while detection examines welds for discontinuities using methods like radiography and ultrasonics. Understanding weld defects helps engineers design safer and more reliable welded structures.
The document describes the various steel treatment and painting processes used on Atlas Copco generators and light towers to protect them from corrosion when exposed to outdoor environments. Different components receive different treatments based on their exposure and importance. All steel components receive a galvanization treatment before further treatments and painting. The canopy receives powder coating, while critical components and the base frame undergo nitrogen laser cutting and cataphoresis before final painting. These treatments help provide long-term corrosion protection and extend the life of components.
Casting Defects Analysis in Foundry and Their Remedial Measures with Industri...AVINASH JURIANI
In this current scenario of globalization, foundries play a key role for manufacturing industries as they are the major source of castings. As a key industry a foundry's performance should be effectively high in terms of production with minimum number of rejections. Castings are the major inputs for most industrial products hence foundry industry is most indispensable. Casting is an integrated process considered as an artwork with experienced professionals for high quality yield, even then in highly controlled environment defects are dominant to take place leading to rejections, contrary to rejections a foundry's key attempt is to satisfy the demands neglecting quality levels.
This document discusses casting defects found in industrial case studies and proposes remedial measures. It begins by introducing the importance of minimizing casting defects for foundry industries. Nine common casting defects are then analyzed: blowholes, shrinkage, hot tears/cracks, lamination, lumps, sand inclusion, flashes, mismatch, and misrun. For each defect, an industrial case study example is provided along with the likely causes and recommended remedial measures. The aim is to provide foundry professionals with knowledge of casting defects and how to control factors to improve quality and reduce rejections. In conclusion, analyzing defects and identifying causes and solutions can help increase casting yield for industries.
Casting is a manufacturing process where liquid material is poured into a mold and solidifies. Advantages include low cost for complex parts and reduced weight. Vacancies in casting include shortage of skilled technicians and need for more capable simulation software. Simulation software allows for predicting cast structure, properties, defects and reducing costs. Aluminum and magnesium alloys are increasingly used in automotive parts like suspension parts and dashboards. New developments in casting include squeeze casting and lost foam casting. Shell molding uses sand and resin to form thin shells. Counter gravity casting and differential pressure casting produce parts like camshafts and crankcases. Flaskless molding avoids flask transport and repair. Freeze casting forms ice patterns for casting. Semisolid
This document provides an overview of sand casting processes. It discusses the key steps which include pattern making, molding sand properties and testing, core making, melting furnaces, casting defects and inspection methods. The main molding processes covered are green sand molding and dry sand molding. Common casting defects like blowholes and surface cracks are addressed. Non-destructive testing methods for inspecting castings such as magnetic particle, dye penetrant, radiography and ultrasonic testing are also summarized.
Molykote P37 in India, email sales@projectsalescorp.comProject Sales Corp
No matter how harsh the environment or how extreme the temperature, you’re sure to find a Molykote® brand lubricant worthy of the challenge. When you specify maintenance products from Dow Corning, you’re specifying the results of more than 60 years of innovations by a world leader in lubrication technology. With dedicated global research and development operations, Molykote brand lubricants from Dow Corning bring you the best in assembly and maintenance technology from around the world. Our knowledgeable sales professionals will help you choose the right lubricating product for your unique maintenance needs.
Now get Molykote products from India'a leading distributor for Molykote products - Project Sales Corporation.
This document discusses casting procedures and defects. It covers topics like the history of casting, wax patterns, spruing wax patterns, investing wax patterns, burning out wax, casting dental alloys, defects, and more. The lost wax technique involves surrounding a wax pattern with investment material, burning out the wax, and introducing molten metal into the mold. Proper spruing, investing, burnout, and casting are important to produce successful dental castings.
The document discusses several ship failures caused by weld defects. It describes Liberty Ship failures in WWII due to stress concentration and susceptible steel. It also examines more recent failures like the Derbyshire in 1980 which was associated with poor structural strength and design. The document analyzes failure cases in detail using photographs, metallurgical testing, and finite element modeling to understand the root causes, which included poor welds, material defects, corrosion, and inadequate inspection. Proper welding, materials selection, inspection, and risk management are identified as important to prevent future ship failures.
1) As electronics components shrink in size, the solder powder particles used in solder paste must also decrease to enable soldering of smaller interconnects. Solder powder particles are manufactured through an atomization process that involves melting alloy and dispersing it into tiny spherical droplets.
2) The size of solder powder particles is classified according to standard mesh screen sizes, ranging from Type 1 at 150-75 micrometers down to Type 7 at 11-2 micrometers. Type 3 and 4 particles between 25-45 micrometers and 20-38 micrometers respectively are most commonly used for mainstream surface mount applications.
3) While finer Type 5 powder between 10-25 micrometers may help with printing very small
This document discusses the casting procedure and defects in dentistry. It begins with a brief history of casting techniques from the 11th century to present. The basic steps of casting include attaching a sprue former to the wax pattern, investing the pattern in a ring, burnout of the wax, and casting of the alloy. Key aspects covered are types of sprue formers and their attachment, crucible formers, casting rings and liners, and the investing procedure. The goals of investing are to produce an accurate mold with adequate expansion to compensate for casting shrinkage.
1) Shell mold casting is a metal casting process where a mold is made from a thin-walled shell created by applying a sand-resin mixture around a pattern. This allows for higher production rates and more complex geometries compared to sand casting.
2) The process involves creating a reusable metal pattern, heating it, and applying a sand-resin mixture to form a shell mold around the pattern. The shells are then cured, filled with molten metal, and broken to remove the casting.
3) Shell mold casting provides advantages like high dimensional accuracy, automation potential, fewer gas defects, and lower labor costs compared to sand casting. It is often used for small to medium parts requiring precision.
The document discusses the process of casting fixed partial dentures. It describes the basic steps which include tooth preparation, impression making, wax pattern preparation, spruing, investing, burnout, alloy casting, and finishing. Key aspects covered include the types of sprue formers, crucible formers, casting rings, ring liners, and investing procedures. The objectives of casting and factors affecting quality such as sprue design, investing technique, and use of vacuum are also summarized.
Castings - Aluminum Gravity die casting Processroshnipatel829
"Aluminium die casting processes are hush-hush as Ingot casting or Mould casting.
During the willingly style, head of the line or slight aluminium is appoint
into rolling ore (slab), extrusion alloy (billet) and wire waive ingot which
are as a consequence transformed in semi- and satisfied products... www.alphametalind.com"
The document discusses the process of metal casting in dentistry. It begins with an introduction to casting and defines it as a process where molten material is poured into a mold and allowed to harden. It then covers topics like dental waxes, sprue formation, investing materials, burnout procedures, casting machines, and alloy melting temperatures. The overall document provides an overview of the key steps and considerations for the dental metal casting procedure.
Series of powerpoint slides showing three different drawing processes used in the manufacture of wires, rod, tubes and drinks cans. The slides are adapted from the University of Liverpool "Materials Processing" lectures [MATS214] by Dr J. Wilcox.
The document describes several test geometries used to determine the failure strengths of composite materials, including the Double Cantilever Beam test for mode I failure, the End Notch Flexure test for mode II failure, and the Mixed-mode Interlaminar Fracture test for mixed mode I/II failure. It also lists the Single Cantilever Beam test for skin debonding energy in composite sandwiches, the Centre Notch Flexure test for thin skin debonding, and the Interlaminar Shear Strength test, a three point bend test to determine shear strength.
The document describes several common composite manufacturing techniques including wet lay-up, vacuum bagging, compression moulding, filament winding, pultrusion, and resin transfer moulding. Each technique involves different processes for combining fibres and resin such as applying layers by hand, using pressure and heat, winding fibres onto a rotating mandrel, pulling fibres through a resin bath, or injecting resin into a mould containing dry fibres. The techniques are suited for different part geometries and production volumes.
The role of technology in sporting performanceCORE-Materials
The lecture answers the questions of how much effect does engineering technology have on sport, is technology only used to increase performance and what are the "new technologies" being introduced. Courtesy of Prof Claire Davies, School of Metallurgy and Materials, University of Birmingham.
The chapter describes principles of the chemical analysis in the SEM and TEM. From "Electron Microscopy and Analysis" textbook by Peter J. Goodhew, John Humphreys and Richard Beanland. Courtesy of Taylor and Francis Books UK.
The chapter gives insight into the scanning electron microscope technique. From "Electron Microscopy and Analysis" textbook by Peter J. Goodhew, John Humphreys and Richard Beanland. Courtesy of Taylor and Francis Books UK.
The chapter gives insight into the transmission electron microscope technique. From "Electron Microscopy and Analysis" textbook by Peter J. Goodhew, John Humphreys and Richard Beanland. Courtesy of Taylor and Francis Books UK.
The chapter explains the diffraction of electrons and demonstrates what it can reveal. From "Electron Microscopy and Analysis" textbook by Peter J. Goodhew, John Humphreys and Richard Beanland. Courtesy of Taylor and Francis Books UK.
Electrons and their interaction with the specimenCORE-Materials
The chapter explains the behaviour of electrons within a specimen and shows how they interact with the atoms of the sample. From "Electron Microscopy and Analysis" textbook by Peter J. Goodhew, John Humphreys and Richard Beanland. Courtesy of Taylor and Francis Books UK.
The chapter gives the comparison of electron microscopy with other imaging and analysis techniques. From "Electron Microscopy and Analysis" textbook by Peter J. Goodhew, John Humphreys and Richard Beanland. Courtesy of Taylor and Francis Books UK.
The chapter gives the basic principles of microscopy. From "Electron Microscopy and Analysis" textbook by Peter J. Goodhew, John Humphreys and Richard Beanland. Courtesy of Taylor and Francis Books UK.
TALAT Lecture 5301: The Surface Treatment and Coil Coating of AluminiumCORE-Materials
This lecture describes the continuous coil coating processes for aluminium in sufficient detail in order to understand the industrial coating technology and its application potential. General background in materials engineering and familiarity with the subject matter covered in TALAT This lectures 5100 and 5200 is assumed.
This lecture describes the processes of electroless, electrolytic, as well as physical and chemical vapour deposition of metals on the aluminium surface in order to achieve variations in its surface properties for functional and decorative purposes. Some knowledge of the surface properties of metals, metallurgy and electrochemistry of aluminium and familiarity with the subject matter covered in TALAT This lectures 5101, 5102, 5105 is assumed.
This lecture describes the process of anodic oxidation of aluminium, which is one of the most unique and commonly used surface treatment techniques for aluminium; it illustrates the weathering behaviour of anodized surfaces. Some familiarity with the subject matter covered in TALAT This lectures 5101- 5104 is assumed.
This lecture describes the key factors associated with conversion coatings on aluminium can be appreciated, such as general and local behaviour of the aluminium surface, range of conversion coatings and interrelationships, requirements of conversion coating, tailor-making of coatings, current and future issues. Some familiarity with the subject matter covered in TALAT This lectures 5101, 5102, 5201 is assumed.
TALAT Lecture 5105: Surface Treatment of AluminiumCORE-Materials
This lecture helps to understand the general principles, methods, properties and applications of plating on aluminium. Some knowledge in general electrochemistry is assumed.
TALAT Lecture 5104: Basic Approaches to Prevent Corrosion of AluminiumCORE-Materials
This lecture describes important measures for the prevention of corrosion of unprotected, bare
aluminium. Basic knowledge of corrosion behaviour of aluminium and some knowledge of the electrochemical nature of corrosion is assumed
TALAT Lecture 5103: Corrosion Control of Aluminium - Forms of Corrosion and P...CORE-Materials
This document discusses various forms of corrosion that can affect aluminium and aluminium alloys. It describes general corrosion that can occur in acid and neutral solutions. It also covers localized corrosion such as pitting, crevice, filiform, and biological corrosion. Factors influencing galvanic and intergranular corrosion are presented. The document also discusses mechanically assisted degradation like erosion, fretting corrosion, and corrosion fatigue. It concludes with descriptions of stress corrosion cracking and hydrogen embrittlement.
TALAT Lecture 5102: Reactivity of the Aluminium Surface in Aqueous SolutionsCORE-Materials
This lecture provides better understanding of the electrochemistry of aluminium; it gives an introduction to the other lectures. Some knowledge in aluminium metallurgy, simple chemistry (thermodynamics and kinetics), electricity and general electrochemistry is assumed.
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
CapTechTalks Webinar Slides June 2024 Donovan Wright.pptxCapitolTechU
Slides from a Capitol Technology University webinar held June 20, 2024. The webinar featured Dr. Donovan Wright, presenting on the Department of Defense Digital Transformation.
How to Setup Default Value for a Field in Odoo 17Celine George
In Odoo, we can set a default value for a field during the creation of a record for a model. We have many methods in odoo for setting a default value to the field.
How to Manage Reception Report in Odoo 17Celine George
A business may deal with both sales and purchases occasionally. They buy things from vendors and then sell them to their customers. Such dealings can be confusing at times. Because multiple clients may inquire about the same product at the same time, after purchasing those products, customers must be assigned to them. Odoo has a tool called Reception Report that can be used to complete this assignment. By enabling this, a reception report comes automatically after confirming a receipt, from which we can assign products to orders.
Gender and Mental Health - Counselling and Family Therapy Applications and In...PsychoTech Services
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
🔥🔥🔥🔥🔥🔥🔥🔥🔥
إضغ بين إيديكم من أقوى الملازم التي صممتها
ملزمة تشريح الجهاز الهيكلي (نظري 3)
💀💀💀💀💀💀💀💀💀💀
تتميز هذهِ الملزمة بعِدة مُميزات :
1- مُترجمة ترجمة تُناسب جميع المستويات
2- تحتوي على 78 رسم توضيحي لكل كلمة موجودة بالملزمة (لكل كلمة !!!!)
#فهم_ماكو_درخ
3- دقة الكتابة والصور عالية جداً جداً جداً
4- هُنالك بعض المعلومات تم توضيحها بشكل تفصيلي جداً (تُعتبر لدى الطالب أو الطالبة بإنها معلومات مُبهمة ومع ذلك تم توضيح هذهِ المعلومات المُبهمة بشكل تفصيلي جداً
5- الملزمة تشرح نفسها ب نفسها بس تكلك تعال اقراني
6- تحتوي الملزمة في اول سلايد على خارطة تتضمن جميع تفرُعات معلومات الجهاز الهيكلي المذكورة في هذهِ الملزمة
واخيراً هذهِ الملزمة حلالٌ عليكم وإتمنى منكم إن تدعولي بالخير والصحة والعافية فقط
كل التوفيق زملائي وزميلاتي ، زميلكم محمد الذهبي 💊💊
🔥🔥🔥🔥🔥🔥🔥🔥🔥
1. TALAT Lecture 3208
The Finishing of Castings
22 pages, 17 figures
Basic Level
prepared by John Campbell and Richard A. Harding, IRC in Materials,
The University of Birmingham
Objectives:
− To provide an introduction to some of the finer points in the production of high
quality castings
− The student will be able to understand the various processes for sealing porosity in
badly made castings and to appreciate factors influencing the accuracy of castings,
including a basic understanding of how to control and measure casting dimensions
Prerequisites:
− Basic understanding of the foundry industry
Date of Issue: 1994
EAA – European Aluminium Association
2. 3208 The Finishing of Castings
Table of Contents
3208 The Finishing of Castings ..........................................................................2
Introduction............................................................................................................... 2
Leakage Problems ..................................................................................................... 3
Pressure Testing of Castings ....................................................................................4
Rectification of Leaking Castings............................................................................5
Impregnation Techniques.................................................................................... 6
Accuracy of Castings ................................................................................................ 9
Controlling Factors ..................................................................................................9
Accuracy Measurements ........................................................................................11
Determination of Datum Planes.............................................................................12
Heat Treatment ....................................................................................................... 15
Effect on Mechanical Properties ............................................................................16
Effect on Residual Stresses....................................................................................17
Effect on Machinability and Corrosion Resistance................................................20
Literature................................................................................................................. 22
List of Figures.......................................................................................................... 22
Introduction
The purpose of this lecture is to consider the processes that need to be carried out on
castings once they have been removed from the mould and cleaned up. These additional
processes are as follows:
1. Rectification. Processes to required to correct any mistakes made during the foundry
production phase.
2. Quality Checking (often misleadingly called Quality Control; there can be no control
over the quality after the casting is finished, since, of course, control of the quality
can only be introduced during manufacture, not afterwards). The checking procedures
are designed to verify that the casting has been manufactured to the specified quality
requirements, including mechanical properties, leak tightness, dimensions etc.
3. Heat treatment. A significant proportion of aluminium alloy castings is heat treated.
TALAT 3208 2
3. Leakage Problems
Castings have an unenviable reputation for leaking when filled with media such as
water, oil or a pressurised gas. This is more of a problem with some metals than others -
for example, it is relatively easy to produce fully sound grey iron castings, whereas
aluminium alloy castings are more prone to leakage problems. These are sometimes
caused by shrinkage porosity - particularly in long freezing range alloys - but only rarely
caused by gas porosity (Figure 3208.00.01).
Leaking Castings
Reasons ! Shrinkage porosity - sometimes
! Gas porosity - rarely
! Oxide films caused by turbulence - most common
Prevention ! Melt metal correctly to prevent oxide formation
! Use filters to remove oxides
! Design running system correctly
alu
Training in Aluminium Application Technologies
Leaking Castings 3208.00.01
The most common reason for leaking castings has already been introduced in TALAT
Lecture 3203: if the running system is designed such that the mould is filled in a
turbulent fashion, the dry oxide films present on the metal in the furnace and ladle or
created during pouring are scrambled up and can form through-wall defects which cause
leaks when the casting is subsequently subjected to a pressure test.
The obvious solution to this is to take all reasonable steps to ensure that the casting is
produced correctly in the first place! In particular, attention needs to be given to melting
the metal in such a way that oxides are minimised or have sufficient time to separate
before the molten metal is poured into the mould. In addition, various types of filter -
such as ceramic foam filters - can be placed in the running system to capture small
amounts of oxides which are transferred from the melting furnace. Most importantly, the
running system should be designed to promote tranquil filling of the mould cavity at less
than the critical velocity, as was discussed in detail in TALAT Lecture 3203.
Considerable experience shows that if these relatively simple rules are followed, then
there is rarely a problem with the pressure tightness of a casting.
However, it has to be recognised that such rules are not yet fully appreciated or correctly
applied in many foundries. Indeed, the rules cannot always be easily applied to the all of
the complex shapes that foundries are asked to produce. In addition, particularly in the
case of a gravity die casting, it is not always easy or economic to modify existing tooling
so that it incorporates the optimum design of running system. In the case of pressure die
TALAT 3208 3
4. castings, the problems of entrained porosity and folded oxide films are so extensive that
such products cannot be recommended for pressure tight applications.
Pressure Testing of Castings
PressureTesting of Castings
Air Bubbles Air
from leak
Seepage from
Plug Water Casting Porosity Pressure
gauge
Paraffin
alu
Training in Aluminium Application Technologies
Pressure Testing of Castings 3208.00.02
Since it is highly undesirable for castings that are required to hold a pressurised fluid to
leak in service, it is common practice for foundries to pressure test castings prior to
delivery to the customer (Figure 3208.00.02). This is often carried out by plugging all
of the cast apertures on the casting and then pressurising the casting with air whilst it is
immersed in water. A tell-tale stream of bubbles immediately reveals if the casting
contains through-wall porosity. Alternative techniques include filling the casting with a
pressurised liquid (such as paraffin, which is a very 'searching' fluid) and either looking
for obvious leaks on the outside or, more quantitatively, monitoring the fluid pressure
during a pre-determined holding period.
Ideally, castings should be pressure tested in the final machined condition because the
machining operation can open up 'blind' porosity, thereby creating a leak path. However,
many castings are not machined by the foundry, but by the end-user or an intermediary.
Therefore it is not surprising that a casting may appear to be sound when tested in the
foundry, only to fail once it has been machined and assembled into the final component.
(This can lead to disagreement between a foundry and its customer, not least because the
latter might invest considerable effort and money in machining a component, only to
find that it is unfit for service. The only solution is, of course, to make the casting
properly in the first place.)
TALAT 3208 4
5. Rectification of Leaking Castings
Rectification of Leaking Castings
! Remake the casting (not a popular option!)
! Remove defect and fill by welding, but ...
- some metals difficult to weld;
- not easy to remove all of the defect;
- may introduce welding defects;
- residual stresses # need for post-weld heat treatment.
! Seal small isolated defects by hammer peening
! Use impregnation to seal widely distributed porosity
alu
Training in Aluminium Application Technologies
Rectification of Leaking Castings 3208.00.03
If the foundryman finds defects during a pressure test, he then has a number of choices
(see also Figure 3208.00.03):
• He can remake the casting, although this is resisted whenever possible!!
If the defects are not too widely distributed, the affected area can be machined to
remove the defect and the cavity filled by welding. Some of the many limitations to
this reclamation welding include:
− not all metals are easy to weld;
− it is often difficult to remove all of the defect;
− welding defects may be introduced;
− it is normally necessary to carry out a post weld heat treatment to restore the
original structure and/or remove residual stresses caused by welding.
• If the defects are limited in size and number, if the metal is relatively ductile and if
the service pressures of the casting are not too high, the common practice is to use a
special hammer to peen over the defective areas. In effect, the metal is deformed to
effect a mechanical seal.
• If the defects are relatively fine and widely distributed, then it may be cost-effective
to seal them using one of a number of impregnation techniques.
TALAT 3208 5
6. Impregnation Techniques
Impregnation Techniques
! Vacuum technique ! Internal pressure technique
Vacuum Sealant Pressure Sealant
Porosity Porosity
Sealing Sealing
plate Plate
Casting Casting
! Dipping technique
Sealant with good
penetrating power
alu
Impregnation Techniques 3208.00.04
Training in Aluminium Application Technologies
It is worthwhile giving a few minutes consideration to the various impregnation
techniques available (Figure 3208.00.04). In its crudest form, a filler can be pushed into
holes, although this is rarely an acceptable engineering solution these days. One of the
better known examples of its misuse was demonstrated by the Tay Bridge disaster in
1879: severe weather and poor design led to the catastrophic collapse of the bridge and
revealed that defects in the poor quality cast iron girders had been filled with lead.
However, there are a number of modern impregnation techniques which are more
reliable. All are based on introducing a sealant into the porous area which is normally
followed by a curing operation, to produce pressure-tight castings which are capable of
holding a fluid (liquid or gas) or retaining a vacuum. There are four techniques
available:
1. Vacuum technique: All openings in the casting are closed, with the exception of one
which is attached to a vacuum pump. The pressure is reduced inside the casting and
the sealant applied to the outside so that it is sucked into the porosity. Only through-
porosity can be sealed in this way and the technique is slow.
2. Internal pressure technique: Again, all openings are closed except one. The casting
is filled with the sealant and pressure applied until the sealant starts to seep through
the porous areas. Remaining sealant is removed prior to curing. This method is
particularly suitable for large castings.
3. Dipping technique: Clean, dry castings are dipped in a tank containing a sealant
having good penetrating properties for a period of about 15 minutes. They are then
removed, drained and air dried for about 12 hours before repeating the pressure test
to check whether the impregnation operation has been effective.
TALAT 3208 6
7. 4. Vacuum/pressure impregnation (Figure 3208.00.05): This is probably the most
reliable technique and is widely used for batches of small components. Castings are
degreased, cleaned and dried and placed in a pressure vessel. A vacuum, typically of
less than 8 millibars, is applied to the vessel and sustained for about 10 minutes to
draw air from the porosity. The sealant introduced into the vessel, the vacuum
released and atmospheric pressure used to force the sealant into the porosity. After a
holding time of about 20 minutes, the castings are removed, the excess sealant
drained off and the castings then washed. The sealant is then cured using heat, most
commonly by immersing the castings in water, or by a special curing agent.
Impregnation Techniques (Cont.)
Sealant
Vacuum
Basket
of work
Impregnate Drain Wash Cure
(e.g.hot water)
alu
Training in Aluminium Application Technologies
Impregnation Techniques (Continued) 3208.00.05
A number of sealant materials have been or are still used (Figure 3208.00.06):
• Sodium silicate: this contains a filler such as metallic oxides, calcium carbonate or
silica to minimise shrinkage on drying. The main advantage of low cost is normally
offset by many disadvantages, including long hardening times (one day at room
temperature), high viscosity, ineffectiveness at sealing gross porosity and poor
longevity.
• Styrene-based polyester resins: these polymerise completely to give a solid sealed
area, but again suffer from disadvantages which include high viscosity,
environmental problems and high curing temperatures (125-135°C for 45 minutes).
• Anaerobic methacrylates: these are liquid in the presence of dissolved oxygen but
polymerise once the oxygen is removed under vacuum conditions. These resins have
a low viscosity and therefore penetrate porosity well. They also cure to give a 100%
solid seal, although this is a lengthy process (2 - 3 hours at room temperature). Other
disadvantages include high cost, the need for continuous aeration and refrigeration to
prevent premature solidification, and the necessity for continual monitoring of the
process by trained personnel.
• Thermocuring methacrylates: these are the most recent development (1977) and
are steadily growing in importance because of their enhanced technical performance
TALAT 3208 7
8. and ease of use. As the name suggests, they are polymerised by curing at elevated
temperature - typically 10 - 15 minutes at 90°C -which is often achieved by
immersing the impregnated parts in hot water. These materials have a number of
advantages which include:
− They are a simple two-part system (sealant and catalyst);
− The surplus sealant washes away easily with water;
− There are no known environmental problems;
− Short process and cure time;
− Simple process equipment and procedures;
− Although these sealants are more expensive than silicates and polyesters, a lower
usage rate and higher productivity means that they are often the most cost-
effective.
Sealant Materials
Sealant Cure Total cycle Ranking of
time sealant cost
Filled Room
sodium temperature, 24 3/4 hours 1 (lowest)
silicate 24 hours
Styrene 125 - 135°C 97 minutes 2
polyester
Anaerobic Room
methacrylates temperature, 205 minutes 4
3 hours
Thermocuring Hot Water 24 minutes 3
methacrylates 10 minutes
Features of methacrylates
- Simple 2 part system - Simple process and equipment
- Surplus sealant is water soluble - Cost-effective
- Environmentally friendly - Suitable for leak rates up to 3000 ml min-1
- Short cycle time - Resistant to high pressure and many chemicals
alu
Sealant Materials 3208.00.06
Training in Aluminium Application Technologies
Thermal curing methacrylates can be used to seal both macro-and micro- porosity in a
wide range of materials - leak rates of up to 3000 ml per minute can be sealed. The
resulting sealed component can withstand high pressure and a wide variety of chemicals.
In some cases, impregnation has become a standard part of the process of producing
castings which are required to be leak-tight. This is especially true for pressure die
casting operations. However, it must be recognised that this is symptomatic of a failure
of the foundry to use a process which is capable of consistently producing high quality
castings. If the correct process is used, then impregnation should not be required. It
should also be noted that whilst impregnation may successfully prevent leaking,
assuming that the pressure and other service conditions are not too extreme, it will do
little to restore the mechanical properties in porous regions to those expected in sound
material.
TALAT 3208 8
9. Accuracy of Castings
Having considered how to prevent or correct for defects which might affect the ability of
a casting to perform adequately in service, we shall now turn to the question of whether
it will be accurate enough for its intended purpose. No casting (nor for that matter, any
other type of component, such as a high precision machining) is ever perfect in terms of
its shape and size, but the question must be whether it is within the tolerances specified
by the designer.
Controlling Factors
Factors Controlling the Accuracy of Castings
! Tooling accuracy ! Casting contraction on freezing
- patterns and coreboxes;
- dies; ! Casting contraction on cooling
- measuring equipment (jigs and
gauges). ! Dimensional changes after casting
- during holding at room temperature
! Mould accuracy e.g. zinc alloys;
- sand vs. ceramic shell vs. die - during heat treatment
e.g. annealing of malleable irons;
! Mould expansion and/ or contraction quenching and tempering.
- during service, particularly at high
! Casting expansion on freezing temperatures.
- can lead to mould dilation
e.g. graphite precipitation in ! Distortion due to shot blasting
cast irons; hydrogen
precipitation
alu
Factors Controlling the Accuracy of Castings 3208.00.07
Training in Aluminium Application Technologies
We will firstly briefly summarise the many factors which control the accuracy of a
casting (see also Figure 3208.00.07):
• Tooling accuracy: This includes the patterns and core boxes, metal dies (when used)
and any measuring equipment, such as jigs and gauges. If any of these are wrongly
made, they will introduce a systematic error, which should be detectable if sufficient
samples are checked. In addition, there may be changes with time: for example,
wooden patterns can wear away and also warp, and metal dies can distort in service.
• Mould accuracy: Sand is the most commonly used moulding medium and its
benefits include the fact that it is used at a more-or-less consistent starting
temperature, which means that the mould dimensions will be closely related to those
of the pattern. It can also be a very rigid material, particularly if modern high pressure
greensand moulding machines or modern cold-setting chemical binders are used,
which again promotes good casting accuracy. In some respects, sand moulds should
therefore be better than the ceramic moulds used in investment casting.
TALAT 3208 9
10. Ceramic moulds are used at a high temperature, which often promotes plastic
deformation of the mould whilst the casting is solidifying, and poor control over the
mould temperature can also cause dimensional variation.
Die casting moulds can produce very accurate castings, particularly in zinc alloys.
However, with higher melting point alloys, there are increasing thermal shock and
fatigue loadings which cause cracking, crazing and distortion, and, in consequence,
both dimensional and surface finish problems.
• Mould expansion and/or contraction: When a molten metal enters a mould, it is
inevitable that heat absorbed by the mould will cause its dimensions to change.
Sometimes the mould is heated uniformly, resulting in uniform expansion, but it is
more common for heating and the consequential dimensional changes to be non-
uniform. The mould wall movement can be outwards or inwards, depending on the
casting design and the mould material. The inaccuracies caused by mould wall
movement depend on factors such as the coefficient of thermal expansion of the
mould material, the heat content of the metal, and the modulus of the casting.
• Casting expansion: Although most metals contract on solidification, there are some
instances of expansion, the most well known example being cast iron, where the
graphite precipitation during solidification leads to enormous pressures being exerted
on the mould walls. If the latter are not strong enough, they deform, resulting in an
oversize casting. In contrast, if the moulds are sufficiently rigid to withstand most of
the expansion pressure, it is possible to counteract any tendency to form shrinkage
porosity, resulting in a sound casting which is also reasonably accurate.
Castings can also expand and dilate the mould if gas precipitation occurs, one
example being in aluminium alloys if the hydrogen level is high. In one example, a
change in the melting conditions led to an increase in the hydrogen content which
produced 3 volume % porosity in the casting and resulted in a 1% increase in the
casting length.
• Casting contraction on freezing: If the casting is poorly fed, we have already seen
(TALAT Lecture 3206) that plastic flow of the solidified shell can occur in response
to the high hydrostatic stresses built up in the casting. This will normally lead to a
localised surface 'sink' or 'draw' in the casting, hence causing a local dimensional
inaccuracy in the casting.
• Casting contraction on cooling: All metals contract as they cool from the solidus to
room temperature. However, the contraction of a shaped casting will be influenced by
the constraint of the mould which will in turn be a function of the design of the
casting and the rigidity of the mould. For example, an 'L' shaped casting will contract
more than an 'H' shaped casting and a solid casting will contract more than a hollow
casting, whose contraction will be restrained by its core.
The skill of pattern making is essentially being able to use experience to predict how
a particular casting will solidify, so that the size of the pattern or die can be adjusted
accordingly.
In addition to this uniform contraction, different parts of a given casting can also
experience different degrees of constraint from the mould/core, resulting in
distortion. A well-known example of this is an open-topped box: whereas the 4 sides
will be free to contract uniformly, the contraction of the base will be restrained and
can result in a distorted (or even a cracked) casting.
TALAT 3208 10
11. • Dimensional changes after casting: Three types of dimensional change can occur in
castings once they have reached room temperature.
− Firstly, some alloys undergo dimensional change at their service temperature if
they have not been fully stabilised by an appropriate heat treatment. For example,
the common structural casting alloy Al-7%Si-0.4%Mg in the solution treated
condition will continue to expand up to a total of approximately 0.1% during their
first months or years at room temperature. This is because of the precipitation of
the compound Mg2Si. Pre-ageing at a sufficiently high temperature is an effective
cure of this dimensional instability.
− Secondly, other dimensional changes occur during any heat treatment which
involves a change of phase. For example, once again, Al-7%Si-0.4%Mg alloy
contracts by 0.1 - 0.2% during solution treatment, as alloying elements are taken
into solution, and then grows by 0.05 - 0.1% as precipitation occurs.
− Thirdly, dimensional changes can occur in service, particularly at elevated
temperature. For example, in an analogous way in which the well-known growth
of grey irons occurs at temperatures as low as 350°C by the continued
precipitation of graphite, growth can also occur in Al-17%Si alloy castings if they
are used at a high enough service temperature for silicon precipitation to occur.
However, this can be prevented by pre-ageing at 230°C for 8 hours.
• Distortion due to shot blasting: When castings are cleaned by shot blasting,
compressive stresses can be introduced into the surface which can distort castings,
particularly those of light section thickness. Excessive shot blasting can also lead to a
loss of detail and rounded edges. It is important to distinguish between shot blasting
and the controlled shot peening of castings in which shot is fired at a casting surface
in order to develop a controlled residual stress distribution to improve the fatigue
performance.
Accuracy Measurements
Having considered the numerous factors which have an effect on the accuracy of a
casting, I would now like to consider how we can measure its actual accuracy
(Figure 3208.00.08). Of course, there is no such thing as absolute accuracy, partly
because there will always be errors in the measuring equipment and often some errors in
the measuring technique. Even the surface finish of the casting will have an effect on its
apparent accuracy which should not be overlooked.
Various techniques are used to check casting accuracy. For initial prototypes or short
production runs, the traditional technique of 'marking out' is still widely used. This uses
a heavily built co-ordinate measuring machine which is designed to take the loads of a
scriber scoring a mark along the surface of the casting. Increasingly nowadays this
technique is being replaced by the use of lightweight, computerised three-dimensional
co-ordinate measuring machines which simply lightly touch the casting, and record the
position of contact electronically.
For long production runs, a traditional technique is to check the contour of a casting by
using template gauges. However, these are not to be recommended since they are both
expensive to make and difficult to use in any effective way.
TALAT 3208 11
12. 'Go/no go' gauges are effective in telling the operator whether particular dimensions of a
casting fall within pre-defined limits. However, they are not sufficiently quantitative for
effective process control and they are subject to wear which imposes the need for a
calibration system. Also, of course, they do not give information such as the drift of
actual dimensions, which can be used in a statistical process control (SPC) procedure.
! Prototypes and short production runs
$ Traditional mark-out equipment
$ Three dimensional coordinate measuring machine
! Long production runs
$ Go/no go gauges
$ Templates
$ Measuring jigs: can be analogue or digital
Gap due to
Template
inaccuracy
Dial
Casting
gauge
Base
alu
Training in Aluminium Application Technologies
Measurement of Casting Accuracy 3208.00.08
A better approach is to use a measuring jig which straddles the casting and which is
fitted with analogue dial gauges or, better still, digital transducers. The goalpost-type jig
is first calibrated against a standard casting and the measuring transducers set to zero.
Alternatively, the jig is stored in a special cradle which locates against the measuring
points, setting them to zero. The jig is therefore stored and protected in its own self-
calibrating housing. The jig is then used to measure the production castings and any
inaccuracy is instantly displayed as a deviation from zero. If digital transducers are used,
the data can be readily stored in a computer-based quality control system and used for
SPC purposes.
Determination of Datum Planes
When attempting to measure a casting (or any other component for that matter), it is
vitally important that due thought is given to defining suitable datum planes
(Figure 3208.00.09). Normally, 3 datum planes are used, mutually perpendicular to
each other, and dimensions are measured from these.
TALAT 3208 12
13. Datum Planes for a Sump Casting
Dipstick boss
! Poor choice of datum ! Good choice of datum
Datum plane
Datum plane
alu
Training in Aluminium Application Technologies
Datum Planes for a Sump Casting 3208.00.09
This shows a schematic view of a cast sump for a diesel engine and two ways of
defining dimensions. The first method shown is poor for 3 main reasons:
1. The datum is at one end of the casting, whereas if the datum had been defined to be
near the centre of the part, the variability resulting from length changes would have
been halved.
2. The only feature on the casting whose location is critical is the dipstick boss. If this is
misplaced, the dipstick fouls other components in the engine compartment. However,
the boss is far from the datum which means that variability in the casting length will
result in large proportion of castings being deemed to be unacceptable due to the boss
being apparently misplaced. This problem would be reduced by placing the datum at
the other end of the casting which is nearer to the boss. If the datum were placed on
the boss itself then the problem is eliminated for ever!
3. The datum is defined relative to a set of machined holes which do not exist on the
casting when it is made. As a result, the onus falls on the machinist to decide where
to place the holes, sometimes with unfortunate results.
The second method shown is a better way of defining the datum where it is located
against an important feature of the casting - the dipstick boss. This results in the boss
being correctly placed even if the casting size varies; all the dimensions are allowed to
'float' from this datum. Furthermore, since the datum is closer to the middle of the
casting, the errors are almost halved.
It is a rather sad fact of life that considerable effort is often expended to produce an
accurate casting which is then scrapped off during the machining stage. For example, an
aluminium cylinder head was made using modern casting technology with dimensions
of ± 0.1 mm. It was necessary to machine the casting in certain areas in order to achieve
higher tolerances and hence the casting was produced with a rather generous machining
allowance of 1 mm. In spite of this, the casting failed to 'clean up', i.e. towards the end
TALAT 3208 13
14. of machining, there was not enough metal ('machining stock') left on the spring platform
in the tappet bores to allow the final dimensions to be obtained. Why was this? The
reason is that although the casting conformed to the drawing, it had been poorly located
on the machine tool because insufficient thought had been given to the parts of the
casting to be used as reference points for unambiguous location of the casting.
It is firstly worthwhile thinking briefly about how many points are required to locate any
object in space. If we take a simple brick-shaped casting as an example, a little thought
will show that a total of six points need to be defined - three (1, 2, 3) for one plane, two
(4, 5) for another plane at right angles and one (6) for the remaining orthogonal plane
(Figure 3208.00.10). If less points are used, the casting will not be unambiguously
located, and if more points are used, some will be in conflict with each other. For the
greatest accuracy, points 1, 2 and 3 should form a large triangle and points 4 and 5
should be as far apart as possible. This then defines the casting 'datums', i.e. the invisible
planes which define a zero point in the space which surrounds the casting.
Six Point Location System
4
5
6
2
3
1
alu
Training in Aluminium Application Technologies
Six Point Location System 3208.00.10
However, it is also necessary to define real features on a casting known as 'machining
points', 'tooling points' or 'pick-up points'. These are often, but not always, coincident
with the casting datums. It is preferable for all six points to be located in one half of the
mould, preferably the drag, although this is not essential since the joint between the drag
and the cope is usually free from major dimensional error. Sometimes suitable features
do not exist on the casting and, in such cases, additional lugs should be added to the
casting. Often, such lugs can also serve as points where the casting is supported and
clamped onto the machine tool or measuring equipment.
TALAT 3208 14
15. 2
3
4
1 5
6
Casting with tooling lugs
1
5
6 3
4 2
Jig used to hold casting
alu
Training in Aluminium Application Technologies
Example: Unique Positioning of Casting for Machining 3208.00.11
Figure 3208.00.11 shows a cuboidal casting having 3 lugs which are used to provide 6
location points using the approach just described. A further feature of these six points is
that all are arranged on centre lines, so as to halve errors in all directions.
This also shows a simple jig for holding this casting and consists of a flat steel plate
fitted with simple pegs and blocks. When the casting is placed on the jig, it can be slid
about on pegs 1, 2 and 3 which define Plane A, then pushed up against locators 4 and 5
to define Plane B, and then slid along these locators until locator 6 is reached. As a
result the casting is located in an unique position relative to the steel base plate.
This 6 point system can act as the basis for integrated manufacturing:
− the pattern maker can define all his measurements relative to the tooling points;
− the foundryman can use the tooling points to check the casting dimensions (as can the
final customer, assuming that the tooling points are left in place);
− the machinist can use the same points to pick up the casting for machining.
It should be relatively easy to set up this 6 point system, particularly where all
operations are on the same site, but may require more perseverance when each operation
is carried out by independent businesses.
Heat Treatment
The final topic that I would like to cover briefly is heat treatment (Figure 3208.00.12).
Large numbers of castings are heat treated and, in some cases, more than one type of
heat treatment may be involved.
TALAT 3208 15
16. Effect on Mechanical Properties
Heat Treatment of Castings (I):
Improves Mechanical Properties (Part A)
LM25 Aged at
120 150 °C
100
Brinell hardness
Aged at
80 200 °C
60
40
Solution treated
(similar to as-cast properties)
20
0
0 1 10 100
Ageing time, hours
alu Heat Treatment of Castings (I):
Training in Aluminium Application Technologies Improves Mechanical Properties (Part A)
3208.00.12
Heat treatments are carried out for a number of reasons. The first of these is to improve
the mechanical properties. This is the usual reason for heat treatment. The strength of
some alloys can be improved by a factor of two or three above that which is obtained in
the as-cast condition.
This shows the effect of solution treatment followed by ageing on the hardness of LM25
alloy (Al - 7%Si - 0.3-0.6%Mg). As would be expected, as the ageing time is increased,
the hardness increases as a result of precipitation, reaches a maximum and then
decreases due to precipitate coarsening. The time to reach the peak hardness decreases
as the ageing temperature increases, but this benefit is offset by a small decrease in the
maximum hardness achieved.
Hardness is, of course, only one of a number of mechanical properties of interest to the
designer and user of castings. Figure 3208.00.13 shows how the 0.2% proof strength
and tensile strength vary with ageing time and can be seen to follow the same behaviour
as the hardness. It can also be seen that the trend in ductility (measured as % elongation)
is the mirror image of the trend in strengths.
TALAT 3208 16
17. Heat Treatment of Castings (I):
Improves Mechanical Properties (Part B)
Cast Al - 7%Si -0.4%Mg
20
300
Tensile
Strength
Strength, MPa
15
Elongation, %
200 0.2% Proof
Strength
10
100
Elongation 5
0
10-2 100 102 104 106
Effective Ageing Time at 175°C, hours
alu Heat Treatment of Castings (I):
Training in Aluminium Application Technologies Improves Mechanical Properties (Part B) 3208.00.13
[It can be noted that the original data for this plot were obtained at a number of different
ageing temperatures. They were combined onto a single plot for an ageing temperature
of 175°C using an Arrhenius-type equation for diffusion-controlled reactions. This states
that:
Rate = A exp (- Q/RT)
where
A is a constant,
Q is an activation energy (137 kJ mol-1for Si in Al - this assumes that Si
controls the diffusion process to form Mg2Si precipitates),
R is the gas constant (8.31 J mol-1) and
T is the absolute temperature.
Application of this equation shows that diffusion rate is approximately doubled for
every 10°C increase in ageing temperature.]
Effect on Residual Stresses
The second reason for carrying out heat treatment is to relieve residual stresses
(Figure 3208.00.14). I would firstly like to consider the reasons why stress relief is
required.
Larger castings are subject to the problem that some parts cool faster than others, so that
stresses are developed during cooling in the mould, and particularly during cooling
when water quenching after being held at a solution treatment temperature. In fact the
quenching stresses usually are much more important than the casting stresses, especially
when it is recalled that the casting stresses are normally relieved during the solution
treatment, and the quench is the last rapid cool that the casting experiences.
TALAT 3208 17
18. The problem of residual stress during quenching is especially important for castings as
opposed to other products such as forgings. This is because castings can be hollow, with
additional important load bearing sections hidden inside the outer walls, protected from
the action of the water quench; the huge volumes of steam generated inside the casting
from the ingress of a small amount of water prevents the entry of further cooling water.
Thus the structural members inside the casting experience slow cooling, after the outside
has cooled and contracted. Thus the interior parts of the casting go into tension, to such
a high level that failure can sometimes be immediate on quenching. If failure is not
immediate, then the stress is retained, to add to service stresses experienced later in its
life, thus encouraging early failure in service.
Heat Treatment of Castings (I)
Minimizing Residual Stresses
Residual stresses develop due to different cooling rates
of light and heavy sections:
- in mould
- during quenching
Residual stresses add to service stresses - can lead to early failure.
Minimize quenching stresses by using a less severe quenching medium.
500
20 mm diameter Al bar
Temperature, °C
400
300
Water
quench Natural
200 cool in
30 %
still air
polymer
quench Forced
100 air
quench
Time, s
1 10 100 1000 10000
alu Heat Treatment of Castings (I)
Training in Aluminium Application Technologies Minimizing Residual Stresses
3208.00.14
These problems are reduced by the use of a polymer quench, or even an air quench.
These quenching actions are more gentle and more controlled, and consequently give a
casting which is substantially free from the danger of residual stress.
Smaller products, usually less than about 100 mm across, are less affected by these
problems, as are those components which are largely solid, or can be accessed on all
sides by the cooling medium.
We can now consider the various methods of carrying out stress relief (Figure
3208.00.15). Years ago castings were stress relieved to some extent by simply leaving
them out in the foundry yard for a period of months or years. Another method which has
been claimed to work more effectively and quickly is stress relief by the use of
vibration.
In general nowadays, however, the only well-researched and proven technique is that of
stress relief by the use of a heat treatment at a sufficiently high temperature that creep of
TALAT 3208 18
19. the material can occur; the plastic flow caused by the internal stress gradually relieves
the stress in the casting.
Heat Treatment of Castings (II)
Stress Relief
! Heat to a temperature where creep can occur
! For aluminium alloys, stress relief temperature is higher than
ageing temperature, therefore reducing strength and hardness.
! Avoid introducing quenching stresses
by selecting correct quenching procedure.
! Typical stress relief treatment for most aluminium alloys :
250°C for 1 - 4 hours.
! Need higher temperature for high temperature alloys:
e.g. 300°C for 2 - 4 hours for RR350.
alu Heat treatment of Castings (II)
Training in Aluminium Application Technologies Stress Relief 3208.00.15
It is important to note that for aluminium alloys the normal ageing treatments are not
carried out at a temperature sufficiently high for any useful stress relief to occur. It is
unfortunate therefore that aluminium alloys have to be drastically overaged, thus losing
most of the strength advantage gained during any prior ageing treatment. Thus castings
which have to undergo stress relief will automatically have relatively poor strength and
hardness (but good ductility of course). This is the major reason for ensuring that
stresses are not put in to the casting by inappropriate quenching procedures in the first
place - they can subsequently reduced only at the penalty of the loss of strength.
Typical stress relief treatments are in the range of 250°C for between 1 and 4 hours for
many aluminium-based casting alloys to reduce the stress to a small fraction of its
original value (the exact degree of reduction of stress does not seem to have been
researched so far as the authors are aware). However, for those aluminium alloys
designed for high temperature strength (e.g. the creep resistant alloy RR 350) a
temperature of 300°C for between 2 and 4 hours is required to reduce the internal stress
to below 10 % of its original value.
TALAT 3208 19
20. Effect on Machinability and Corrosion Resistance
There are two further benefits which can be obtained by heat treating castings.
Firstly, it is possible to improve their machinability (Figure 3208.00.16). The
aluminium-silicon alloys in the as-cast state machine rather poorly, exhibiting a poor
surface finish, probably as a result of the large difference in hardness between the
aluminium matrix and the silicon-containing eutectic phases. Also, because of the
relatively high ductility of the alloy, the cutting tool generates a long curling chip which
entangles the machine tool in an inconvenient and even dangerous way. Heat treatment
leads to a more uniform microstructural hardness and a reduced ductility, which results
in a greatly improved machined finish and the swarf from the cutting action generates
fine chips in convenient short lengths.
Heat Treatment of Castings (III)
Improved Machinability
! Al-Si alloys have poor machinability in the as-cast condition.
! Heat treatment leads to $ more uniform microstructure
$ lower ductility
and hence $ improved surface finish
alu
Heat Treatment of Castings (III)
Training in Aluminium Application Technologies Improved Machinability 3208.00.16
Secondly, it is possible to improve the corrosion resistance of most cast aluminium
alloys as a result of solution heat treatment (Figure 3208.00.17). This is especially
TALAT 3208 20
21. Heat Treatment of Castings (IV)
Improved Corrosion Resistance
! Solution treatment removes interdendritic phases, such as:
$ CuAl2 when small amounts of Cu are present in Al-Si alloys;
$ Beta phase (Al5Mg8) in Al-Mg alloys.
! These phases lead to bimetallic corrosion in the presence of oxygen.
! Solution treatment therefore improves corrosion resistance of
most aluminium alloys.
alu
Heat Treatment of Castings (IV)
Training in Aluminium Application Technologies Improved Corrosion Resistance 3208.00.17
noticeable in alloys which contain a small amount of copper. When fully in solution this
is relatively harmless from the point of view of corrosion. However, when present as an
interdendritic phase, of composition perhaps CuAl2, then a bimetallic corrosion couple
is set up, in which the cathode is the copper-rich phase, and the anode is the surrounding
aluminium-rich matrix, in which the rate of local corrosion is high, leading to rapid
pitting in an aqueous environment containing oxygen in solution.
Where there is only a limited supply of oxygen in an environment isolated from the air
(e.g. in a central heating installation) then the initial oxygen in solution is quickly
consumed and not replaced, so that the corrosion is rapidly halted.
The copper content of the relatively pure Al-7%Si-0.5%Mg and Al-11%Si alloys is kept
low to reduce these problems. However, a solution heat treatment will ensure that these
problems are reduced further.
The aluminium-magnesium alloys also benefit from solution treatment by the removal
of the beta phase (Al5Mg8) from grain boundaries. If these phases are not removed the
alloy is subject to stress corrosion cracking along the grain boundaries.
There are therefore four reasons why castings are heat treated.
TALAT 3208 21
22. Literature
Campbell, J.: Castings, Butterworth Heinemann, 1991.
Anon: Casting impregnation - a casting tool, Metals and Materials, October 1985,
Vol. 1, No. 10, 619 -622.
List of Figures
Figure No. Figure Title (Overhead)
3208.00.01 Leaking Castings
3208.00.02 Pressure Testing of Castings
3208.00.03 Rectification of Leaking Castings
3208.00.04 Impregnation Techniques
3208.00.05 Impregnation Techniques (Continued)
3208.00.06 Sealant Materials
3208.00.07 Factors Controlling the Accuracy of Castings
3208.00.08 Measurement of Casting Accuracy
3208.00.09 Datum Planes for a Sump Casting
3208.00.10 Six Point Location System
3208.00.11 Example: Unique Positioning of Casting for Machining
3208.00.12 Heat Treatment of Castings (I): Improves Mechanical Properties (Part A)
3208.00.13 Heat Treatment of Castings (I): Improves Mechanical Properties (Part B)
3208.00.14 Heat Treatment of Castings (I): Minimizing Residual Stresses
3208.00.15 Heat Treatment of Castings (II): Stress Relief
3208.00.16 Heat Treatment of Castings (III): Improved Machinability
3208.00.17 Heat Treatment of Castings (IV): Improved Corrosion Resistance
TALAT 3208 22