This lecture gives a brief introduction to the product information structure, a sustainable business concept and Life Cycle; it presents the product and process "Generic Code" - the chromosomes; it generates interest about the concept of "Know Your Product", "Life Cycle Logistics", "Universal Virtues" and "Material/Component Hierarchical Structure" and their use creating a sustainable business concept; it imparts knowledge about Life Cycle Assessment. Some familiarity with QFD (Quality Functions Deployment) principles is assumed.
The document discusses an interface between Rockwell PlantPAx/FactoryTalk and eRPortal's condition based maintenance software. The interface enables condition monitoring of assets using FactoryTalk tag levels and values to automatically create work orders and inspection triggers. Integration provides two-way visibility between maintenance and automation operations. Preventative maintenance can be scheduled based on actual equipment usage levels instead of calendar time alone.
This document provides an instructor's guide for IBM Tivoli Storage Manager 5.4 Implementation and Administration, Part One training. It includes notes on course components, classroom setup instructions, timing guidelines, suggestions for delivery, and information on student exercises. The guide is intended to help instructors successfully deliver the course material and provides important context for the course objectives, prerequisites, and recommended demonstrations.
The document discusses the issues with using "component teams" and advocates for using "feature teams" instead. Component teams are organized by the different components of a system, which can lead to misaligned priorities, work imbalances, late integration issues. Feature teams cut across components, with each team responsible for delivering a prioritized feature end-to-end. This avoids many problems of component teams by managing dependencies internally and keeping delivery aligned with customer value. Case studies demonstrate how organizations can structure their teams as feature teams rather than component teams.
Presentation resource manager™utility package for st9990 and st9985 storage...xKinAnx
The Resource Manager utility package provides tools for managing individual ST9990 and ST9985 storage systems. It includes utilities like Storage Navigator, LUN Manager, and Performance Monitor. The package simplifies storage management but lacks distributed or multi-system capabilities. Recent updates include replacing GraphTrack with Performance Monitor and adding data retention, volume shredder, and backup integration tools.
IBM Power - System software
Med IBM Power System Software kan du optimere og forenkle driften af din IT. Hør bl.a. om vores effektive nye software modul, IBM PowerSC (Security and Compliance).
Jan Kristian Nielsen, Client Architect, IBM
This tech note outlines makefile and project file generation, and how generated code
and build directories are arranged in the Q2-2005 release. Context
The Q2-2005 release eliminates the gencpp.bat/genproject.bat approach with a move to PathMATE GUI-based transformation for both RSA and Enterprise based developers. This provides an opportunity to replace the genproject.bat approach and refine the build directory structure.
The document describes the Bone Marrow Processing (BMP) protocol for Terumo BCT's Spectra Optia apheresis system. The protocol uses a single-bag approach to simplify the BMP procedure. Operators can monitor and control the bone marrow processing through the system's intuitive graphical user interface. The protocol reduces processing time to under 90 minutes while consistently concentrating the mononuclear cells and reducing red blood cells by over 97% and volume by over 80%.
The document outlines the seven stages of the system development life cycle: 1) preliminary analysis to propose solutions and costs/benefits, 2) systems analysis and requirements definition by collecting existing system facts and analyzing proposed systems, 3) systems design to describe desired features and operations in detail, 4) development of software modules, 5) integration and testing of modules for errors, 6) acceptance, installation, and deployment approved by management, and 7) maintenance and evaluation to ensure smooth working and repair mistakes.
The document discusses an interface between Rockwell PlantPAx/FactoryTalk and eRPortal's condition based maintenance software. The interface enables condition monitoring of assets using FactoryTalk tag levels and values to automatically create work orders and inspection triggers. Integration provides two-way visibility between maintenance and automation operations. Preventative maintenance can be scheduled based on actual equipment usage levels instead of calendar time alone.
This document provides an instructor's guide for IBM Tivoli Storage Manager 5.4 Implementation and Administration, Part One training. It includes notes on course components, classroom setup instructions, timing guidelines, suggestions for delivery, and information on student exercises. The guide is intended to help instructors successfully deliver the course material and provides important context for the course objectives, prerequisites, and recommended demonstrations.
The document discusses the issues with using "component teams" and advocates for using "feature teams" instead. Component teams are organized by the different components of a system, which can lead to misaligned priorities, work imbalances, late integration issues. Feature teams cut across components, with each team responsible for delivering a prioritized feature end-to-end. This avoids many problems of component teams by managing dependencies internally and keeping delivery aligned with customer value. Case studies demonstrate how organizations can structure their teams as feature teams rather than component teams.
Presentation resource manager™utility package for st9990 and st9985 storage...xKinAnx
The Resource Manager utility package provides tools for managing individual ST9990 and ST9985 storage systems. It includes utilities like Storage Navigator, LUN Manager, and Performance Monitor. The package simplifies storage management but lacks distributed or multi-system capabilities. Recent updates include replacing GraphTrack with Performance Monitor and adding data retention, volume shredder, and backup integration tools.
IBM Power - System software
Med IBM Power System Software kan du optimere og forenkle driften af din IT. Hør bl.a. om vores effektive nye software modul, IBM PowerSC (Security and Compliance).
Jan Kristian Nielsen, Client Architect, IBM
This tech note outlines makefile and project file generation, and how generated code
and build directories are arranged in the Q2-2005 release. Context
The Q2-2005 release eliminates the gencpp.bat/genproject.bat approach with a move to PathMATE GUI-based transformation for both RSA and Enterprise based developers. This provides an opportunity to replace the genproject.bat approach and refine the build directory structure.
The document describes the Bone Marrow Processing (BMP) protocol for Terumo BCT's Spectra Optia apheresis system. The protocol uses a single-bag approach to simplify the BMP procedure. Operators can monitor and control the bone marrow processing through the system's intuitive graphical user interface. The protocol reduces processing time to under 90 minutes while consistently concentrating the mononuclear cells and reducing red blood cells by over 97% and volume by over 80%.
The document outlines the seven stages of the system development life cycle: 1) preliminary analysis to propose solutions and costs/benefits, 2) systems analysis and requirements definition by collecting existing system facts and analyzing proposed systems, 3) systems design to describe desired features and operations in detail, 4) development of software modules, 5) integration and testing of modules for errors, 6) acceptance, installation, and deployment approved by management, and 7) maintenance and evaluation to ensure smooth working and repair mistakes.
This lecture imparts knowledge about ?production and casting of SiC-particle reinforced aluminium metal matrix composite - PMMC (SiCAl<sub>7</sub>SiMg); use of Life Cycle Analysis. It provides insight to how to redesign a product using life cycle thinking and LCA to minimize the ecological side effects; the importance of having a thoroughly knowledge about the product's life and its environmental impact. Some knowledge of the concept of the product information structure - "the chromosomes" and familiarity with LCA methodology is assumed.
This document provides a work breakdown structure for the "Bus Ticks" project, which involves developing an online system for booking bus tickets. The project includes developing a prototype, arranging meetings with transport company bosses, and developing the full system. The system will have two main modules: a Bus Ticket Management System for companies and an Online Ticket Selling System for customers. It will then be delivered, integrated and tested with clients, and long-term system support will be provided. The document outlines 15 work items with descriptions and estimates for cost and effort.
An Algorithm Based Simulation Modeling For Control of Production SystemsIJMER
This document describes an algorithm-based simulation approach for modeling and controlling flexible production systems. The approach models both the physical production system and the control system to evaluate their integrated performance. Key features include:
1) The approach integrates control system design into the physical simulation to evaluate their combined impact.
2) The algorithm-based design is extensible and allows modeling of different control programs and production system designs.
3) Finite automata formalism provides a mathematical foundation for logical and quantitative analysis of the system.
4) The framework facilitates robust controller models that can resolve issues like deadlocks and accommodate failures.
5) Analysts can evaluate how different control programs and production system designs impact
This document provides guidance on performance tuning for Oracle EPM products. It begins with an introduction to key performance concepts and drivers for Oracle EPM systems. The document then lists top tuning recommendations, separated into sections on tuning the operating system, WebLogic server, Java virtual machines, HTTP server, database, and reporting services. Throughout, it emphasizes the importance of testing any changes and monitoring their impact on performance.
This document provides tuning recommendations to optimize the performance of an Oracle EPM system. It begins with an introduction to EPM system performance concepts. The document then lists the top tuning recommendations, which include tuning the operating system, WebLogic server, Java VMs, HTTP server, database, and RAF services. Specific parameters and their suggested values are provided for Linux, Windows, and AIX operating systems. The document emphasizes the importance of testing any changes to verify performance improvements.
This document provides an overview of modular programming concepts based on the ISA-88 standard for batch and discrete manufacturing. It describes key concepts such as the separation of procedural and equipment control, and the physical and procedural models. The physical model defines a hierarchy of equipment from the enterprise level down to equipment and control modules. The procedural model defines how the equipment is used to perform tasks based on the physical model. Modular programming using these standards provides benefits such as flexible production, improved performance, and reduced costs for both manufacturers and developers.
- .NET remoting allows objects to be placed remotely across a network where they can communicate with local objects.
- Remote objects are activated in different ways as client-activated objects which have a finite lease time or server-activated objects which can accept single or multiple calls.
- The document provides details on remote objects, channels for message passing, and activation methods and gives examples of creating a remotable class.
The document provides instructions for migrating configurations from ABB REL670 1.1 to REL670 1.2.3 using the IED Configuration Migration tool in PCM600 Ver. 2.x. The migration process exports the existing project, imports it into PCM600, and uses ICM to migrate individual IED configurations. This results in obsolete functions being removed and versioned functions being updated. The summary provides details on functions affected and any reengineering required. The instructions then outline reengineering steps for application configuration, parameters, SCL engineering, communication configuration, graphical displays, and signal matrix to complete the migration.
The document discusses various software architectural styles. It provides descriptions and examples of different styles including:
1) Data-centered architectures which focus on integrating data access and use a centralized data store. Examples given are repository and blackboard styles.
2) Pipe-and-filter architectures which view systems as data transformations through a series of components. Both batch sequential and incremental pipe-and-filter styles are covered.
3) Client-server architectures which separate systems into independent clients that request services from servers. Peer-to-peer is also discussed as a related style.
The document introduces CORA, a Common Reference Architecture developed to help design and deliver integrated IT solutions. CORA is founded on existing models, standards, and vendor reference architectures. It provides a framework to rationalize complex IT landscapes and assess new technologies like cloud computing. CORA can be used to decompose packaged solutions, harmonize heterogeneous systems, and optimize solution design in a hybrid, cross-technology environment. Examples show how CORA can be applied to assess a cloud provider's offering or the SAP technology stack.
This document discusses software life cycle models, including the waterfall, incremental, evolutionary (prototyping), and spiral models. It describes the common phases of software development like requirements, design, implementation, testing, deployment, and maintenance. The waterfall model is a traditional sequential approach, while other models allow for more iterative development and flexibility. Selection of the appropriate model depends on factors like the project and level of risk.
This document provides instructions for rapidly deploying an Oracle Hyperion Enterprise Performance Management System planning domain for development environments. It outlines the deployment requirements, three step deployment process, and detailed instructions for each step. The steps include: 1) Downloading installation files from Oracle including the Oracle 11g database and Hyperion system files. 2) Installing and configuring the Oracle 11g database. 3) Installing and configuring the Hyperion EPM system including planning, financial reporting, and other modules. The entire process takes approximately three hours to complete.
2001 09 ma,ma b2 b process integration tutorialMike Marin
“XML-based standards for B2B Process Integration
”. Tutorial about WfMC standards in the area of workflow and B2B, presented by Martin Ader, and Mike Marin.
21st Century Service Oriented ArchitectureBob Rhubart
Service Oriented Architecture has evolved from concept to reality in the last decade. The right methodology coupled with mature SOA technologies has helped customers demonstrate success in both innovation and ROI. In this session you will learn how Oracle SOA Suite’s orchestration, virtualization, and governance capabilities provide the infrastructure to run mission critical business and system applications. And we’ll take a special look at the convergence of SOA & BPM using Oracle’s Unified technology stack.
(As presented by Samrat Ray at Oracle Technology Network Architect Day in Chicago, October 24, 2011.)
The document discusses quality attributes of embedded systems. There are two types of attributes: operational and non-operational. Operational attributes relate to how the system functions and includes response, throughput, reliability, and maintainability. Response measures how fast the system tracks inputs. Throughput measures production efficiency. Reliability measures how often the system works properly. Maintainability measures support for issues and maintenance. Non-operational attributes do not relate to function and includes testability, debug-ability, evolvability, and portability. Testability measures how easily a system can be tested. Debug-ability measures how issues can be identified. Evolvability measures how easily a system can be modified with new technologies. Portability measures
A generic log analyzer for auto recovery of container orchestration systemConference Papers
This document proposes a generic log analyzer to automate troubleshooting in container orchestration systems. It describes a typical container orchestration architecture and how logs are generated at different levels. The proposed model uses Elasticsearch for centralized log management and Kibana for log visualization. The log analyzer consists of six main components: log detector, log predictor, action monitor, solution analyzer, database, and log manager. An algorithm is presented for how the log analyzer would identify errors from logs, group related errors, determine solutions from the solution analyzer, initiate action plans, monitor statuses, and update the database. Several troubleshooting cases involving components like the worker node, master node, and registry are used to demonstrate how the log analyzer would automate resolving issues
The document summarizes a senior capstone design project for Cameron to improve tracking of work progress at their manufacturing facility. The project involved modeling the current production system, analyzing causes of waste, and creating a new workboard and tracking system. The proposed system uses a workboard, phone app, and VBA program to collect and analyze real-time production data to monitor line balancing and workstation utilization.
This Technical Note describes the optimizations to be deployed in RAM and code space optimization in the UML Foundation for C implementation architecture. It lists the target structures and accessor code to be eliminated when it is not needed.
Series of powerpoint slides showing three different drawing processes used in the manufacture of wires, rod, tubes and drinks cans. The slides are adapted from the University of Liverpool "Materials Processing" lectures [MATS214] by Dr J. Wilcox.
The document describes several test geometries used to determine the failure strengths of composite materials, including the Double Cantilever Beam test for mode I failure, the End Notch Flexure test for mode II failure, and the Mixed-mode Interlaminar Fracture test for mixed mode I/II failure. It also lists the Single Cantilever Beam test for skin debonding energy in composite sandwiches, the Centre Notch Flexure test for thin skin debonding, and the Interlaminar Shear Strength test, a three point bend test to determine shear strength.
More Related Content
Similar to TALAT Lecture 2110.02: Product information structure, business concept and LCA
This lecture imparts knowledge about ?production and casting of SiC-particle reinforced aluminium metal matrix composite - PMMC (SiCAl<sub>7</sub>SiMg); use of Life Cycle Analysis. It provides insight to how to redesign a product using life cycle thinking and LCA to minimize the ecological side effects; the importance of having a thoroughly knowledge about the product's life and its environmental impact. Some knowledge of the concept of the product information structure - "the chromosomes" and familiarity with LCA methodology is assumed.
This document provides a work breakdown structure for the "Bus Ticks" project, which involves developing an online system for booking bus tickets. The project includes developing a prototype, arranging meetings with transport company bosses, and developing the full system. The system will have two main modules: a Bus Ticket Management System for companies and an Online Ticket Selling System for customers. It will then be delivered, integrated and tested with clients, and long-term system support will be provided. The document outlines 15 work items with descriptions and estimates for cost and effort.
An Algorithm Based Simulation Modeling For Control of Production SystemsIJMER
This document describes an algorithm-based simulation approach for modeling and controlling flexible production systems. The approach models both the physical production system and the control system to evaluate their integrated performance. Key features include:
1) The approach integrates control system design into the physical simulation to evaluate their combined impact.
2) The algorithm-based design is extensible and allows modeling of different control programs and production system designs.
3) Finite automata formalism provides a mathematical foundation for logical and quantitative analysis of the system.
4) The framework facilitates robust controller models that can resolve issues like deadlocks and accommodate failures.
5) Analysts can evaluate how different control programs and production system designs impact
This document provides guidance on performance tuning for Oracle EPM products. It begins with an introduction to key performance concepts and drivers for Oracle EPM systems. The document then lists top tuning recommendations, separated into sections on tuning the operating system, WebLogic server, Java virtual machines, HTTP server, database, and reporting services. Throughout, it emphasizes the importance of testing any changes and monitoring their impact on performance.
This document provides tuning recommendations to optimize the performance of an Oracle EPM system. It begins with an introduction to EPM system performance concepts. The document then lists the top tuning recommendations, which include tuning the operating system, WebLogic server, Java VMs, HTTP server, database, and RAF services. Specific parameters and their suggested values are provided for Linux, Windows, and AIX operating systems. The document emphasizes the importance of testing any changes to verify performance improvements.
This document provides an overview of modular programming concepts based on the ISA-88 standard for batch and discrete manufacturing. It describes key concepts such as the separation of procedural and equipment control, and the physical and procedural models. The physical model defines a hierarchy of equipment from the enterprise level down to equipment and control modules. The procedural model defines how the equipment is used to perform tasks based on the physical model. Modular programming using these standards provides benefits such as flexible production, improved performance, and reduced costs for both manufacturers and developers.
- .NET remoting allows objects to be placed remotely across a network where they can communicate with local objects.
- Remote objects are activated in different ways as client-activated objects which have a finite lease time or server-activated objects which can accept single or multiple calls.
- The document provides details on remote objects, channels for message passing, and activation methods and gives examples of creating a remotable class.
The document provides instructions for migrating configurations from ABB REL670 1.1 to REL670 1.2.3 using the IED Configuration Migration tool in PCM600 Ver. 2.x. The migration process exports the existing project, imports it into PCM600, and uses ICM to migrate individual IED configurations. This results in obsolete functions being removed and versioned functions being updated. The summary provides details on functions affected and any reengineering required. The instructions then outline reengineering steps for application configuration, parameters, SCL engineering, communication configuration, graphical displays, and signal matrix to complete the migration.
The document discusses various software architectural styles. It provides descriptions and examples of different styles including:
1) Data-centered architectures which focus on integrating data access and use a centralized data store. Examples given are repository and blackboard styles.
2) Pipe-and-filter architectures which view systems as data transformations through a series of components. Both batch sequential and incremental pipe-and-filter styles are covered.
3) Client-server architectures which separate systems into independent clients that request services from servers. Peer-to-peer is also discussed as a related style.
The document introduces CORA, a Common Reference Architecture developed to help design and deliver integrated IT solutions. CORA is founded on existing models, standards, and vendor reference architectures. It provides a framework to rationalize complex IT landscapes and assess new technologies like cloud computing. CORA can be used to decompose packaged solutions, harmonize heterogeneous systems, and optimize solution design in a hybrid, cross-technology environment. Examples show how CORA can be applied to assess a cloud provider's offering or the SAP technology stack.
This document discusses software life cycle models, including the waterfall, incremental, evolutionary (prototyping), and spiral models. It describes the common phases of software development like requirements, design, implementation, testing, deployment, and maintenance. The waterfall model is a traditional sequential approach, while other models allow for more iterative development and flexibility. Selection of the appropriate model depends on factors like the project and level of risk.
This document provides instructions for rapidly deploying an Oracle Hyperion Enterprise Performance Management System planning domain for development environments. It outlines the deployment requirements, three step deployment process, and detailed instructions for each step. The steps include: 1) Downloading installation files from Oracle including the Oracle 11g database and Hyperion system files. 2) Installing and configuring the Oracle 11g database. 3) Installing and configuring the Hyperion EPM system including planning, financial reporting, and other modules. The entire process takes approximately three hours to complete.
2001 09 ma,ma b2 b process integration tutorialMike Marin
“XML-based standards for B2B Process Integration
”. Tutorial about WfMC standards in the area of workflow and B2B, presented by Martin Ader, and Mike Marin.
21st Century Service Oriented ArchitectureBob Rhubart
Service Oriented Architecture has evolved from concept to reality in the last decade. The right methodology coupled with mature SOA technologies has helped customers demonstrate success in both innovation and ROI. In this session you will learn how Oracle SOA Suite’s orchestration, virtualization, and governance capabilities provide the infrastructure to run mission critical business and system applications. And we’ll take a special look at the convergence of SOA & BPM using Oracle’s Unified technology stack.
(As presented by Samrat Ray at Oracle Technology Network Architect Day in Chicago, October 24, 2011.)
The document discusses quality attributes of embedded systems. There are two types of attributes: operational and non-operational. Operational attributes relate to how the system functions and includes response, throughput, reliability, and maintainability. Response measures how fast the system tracks inputs. Throughput measures production efficiency. Reliability measures how often the system works properly. Maintainability measures support for issues and maintenance. Non-operational attributes do not relate to function and includes testability, debug-ability, evolvability, and portability. Testability measures how easily a system can be tested. Debug-ability measures how issues can be identified. Evolvability measures how easily a system can be modified with new technologies. Portability measures
A generic log analyzer for auto recovery of container orchestration systemConference Papers
This document proposes a generic log analyzer to automate troubleshooting in container orchestration systems. It describes a typical container orchestration architecture and how logs are generated at different levels. The proposed model uses Elasticsearch for centralized log management and Kibana for log visualization. The log analyzer consists of six main components: log detector, log predictor, action monitor, solution analyzer, database, and log manager. An algorithm is presented for how the log analyzer would identify errors from logs, group related errors, determine solutions from the solution analyzer, initiate action plans, monitor statuses, and update the database. Several troubleshooting cases involving components like the worker node, master node, and registry are used to demonstrate how the log analyzer would automate resolving issues
The document summarizes a senior capstone design project for Cameron to improve tracking of work progress at their manufacturing facility. The project involved modeling the current production system, analyzing causes of waste, and creating a new workboard and tracking system. The proposed system uses a workboard, phone app, and VBA program to collect and analyze real-time production data to monitor line balancing and workstation utilization.
This Technical Note describes the optimizations to be deployed in RAM and code space optimization in the UML Foundation for C implementation architecture. It lists the target structures and accessor code to be eliminated when it is not needed.
Similar to TALAT Lecture 2110.02: Product information structure, business concept and LCA (20)
Series of powerpoint slides showing three different drawing processes used in the manufacture of wires, rod, tubes and drinks cans. The slides are adapted from the University of Liverpool "Materials Processing" lectures [MATS214] by Dr J. Wilcox.
The document describes several test geometries used to determine the failure strengths of composite materials, including the Double Cantilever Beam test for mode I failure, the End Notch Flexure test for mode II failure, and the Mixed-mode Interlaminar Fracture test for mixed mode I/II failure. It also lists the Single Cantilever Beam test for skin debonding energy in composite sandwiches, the Centre Notch Flexure test for thin skin debonding, and the Interlaminar Shear Strength test, a three point bend test to determine shear strength.
The document describes several common composite manufacturing techniques including wet lay-up, vacuum bagging, compression moulding, filament winding, pultrusion, and resin transfer moulding. Each technique involves different processes for combining fibres and resin such as applying layers by hand, using pressure and heat, winding fibres onto a rotating mandrel, pulling fibres through a resin bath, or injecting resin into a mould containing dry fibres. The techniques are suited for different part geometries and production volumes.
The role of technology in sporting performanceCORE-Materials
The lecture answers the questions of how much effect does engineering technology have on sport, is technology only used to increase performance and what are the "new technologies" being introduced. Courtesy of Prof Claire Davies, School of Metallurgy and Materials, University of Birmingham.
The chapter describes principles of the chemical analysis in the SEM and TEM. From "Electron Microscopy and Analysis" textbook by Peter J. Goodhew, John Humphreys and Richard Beanland. Courtesy of Taylor and Francis Books UK.
The chapter gives insight into the scanning electron microscope technique. From "Electron Microscopy and Analysis" textbook by Peter J. Goodhew, John Humphreys and Richard Beanland. Courtesy of Taylor and Francis Books UK.
The chapter gives insight into the transmission electron microscope technique. From "Electron Microscopy and Analysis" textbook by Peter J. Goodhew, John Humphreys and Richard Beanland. Courtesy of Taylor and Francis Books UK.
The chapter explains the diffraction of electrons and demonstrates what it can reveal. From "Electron Microscopy and Analysis" textbook by Peter J. Goodhew, John Humphreys and Richard Beanland. Courtesy of Taylor and Francis Books UK.
Electrons and their interaction with the specimenCORE-Materials
The chapter explains the behaviour of electrons within a specimen and shows how they interact with the atoms of the sample. From "Electron Microscopy and Analysis" textbook by Peter J. Goodhew, John Humphreys and Richard Beanland. Courtesy of Taylor and Francis Books UK.
The chapter gives the comparison of electron microscopy with other imaging and analysis techniques. From "Electron Microscopy and Analysis" textbook by Peter J. Goodhew, John Humphreys and Richard Beanland. Courtesy of Taylor and Francis Books UK.
The chapter gives the basic principles of microscopy. From "Electron Microscopy and Analysis" textbook by Peter J. Goodhew, John Humphreys and Richard Beanland. Courtesy of Taylor and Francis Books UK.
TALAT Lecture 5301: The Surface Treatment and Coil Coating of AluminiumCORE-Materials
This lecture describes the continuous coil coating processes for aluminium in sufficient detail in order to understand the industrial coating technology and its application potential. General background in materials engineering and familiarity with the subject matter covered in TALAT This lectures 5100 and 5200 is assumed.
This lecture describes the processes of electroless, electrolytic, as well as physical and chemical vapour deposition of metals on the aluminium surface in order to achieve variations in its surface properties for functional and decorative purposes. Some knowledge of the surface properties of metals, metallurgy and electrochemistry of aluminium and familiarity with the subject matter covered in TALAT This lectures 5101, 5102, 5105 is assumed.
This lecture describes the process of anodic oxidation of aluminium, which is one of the most unique and commonly used surface treatment techniques for aluminium; it illustrates the weathering behaviour of anodized surfaces. Some familiarity with the subject matter covered in TALAT This lectures 5101- 5104 is assumed.
This lecture describes the key factors associated with conversion coatings on aluminium can be appreciated, such as general and local behaviour of the aluminium surface, range of conversion coatings and interrelationships, requirements of conversion coating, tailor-making of coatings, current and future issues. Some familiarity with the subject matter covered in TALAT This lectures 5101, 5102, 5201 is assumed.
TALAT Lecture 5105: Surface Treatment of AluminiumCORE-Materials
This lecture helps to understand the general principles, methods, properties and applications of plating on aluminium. Some knowledge in general electrochemistry is assumed.
TALAT Lecture 5104: Basic Approaches to Prevent Corrosion of AluminiumCORE-Materials
This lecture describes important measures for the prevention of corrosion of unprotected, bare
aluminium. Basic knowledge of corrosion behaviour of aluminium and some knowledge of the electrochemical nature of corrosion is assumed
TALAT Lecture 5103: Corrosion Control of Aluminium - Forms of Corrosion and P...CORE-Materials
This document discusses various forms of corrosion that can affect aluminium and aluminium alloys. It describes general corrosion that can occur in acid and neutral solutions. It also covers localized corrosion such as pitting, crevice, filiform, and biological corrosion. Factors influencing galvanic and intergranular corrosion are presented. The document also discusses mechanically assisted degradation like erosion, fretting corrosion, and corrosion fatigue. It concludes with descriptions of stress corrosion cracking and hydrogen embrittlement.
TALAT Lecture 5102: Reactivity of the Aluminium Surface in Aqueous SolutionsCORE-Materials
This lecture provides better understanding of the electrochemistry of aluminium; it gives an introduction to the other lectures. Some knowledge in aluminium metallurgy, simple chemistry (thermodynamics and kinetics), electricity and general electrochemistry is assumed.
Leveraging Generative AI to Drive Nonprofit InnovationTechSoup
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
Strategies for Effective Upskilling is a presentation by Chinwendu Peace in a Your Skill Boost Masterclass organisation by the Excellence Foundation for South Sudan on 08th and 09th June 2024 from 1 PM to 3 PM on each day.
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptxEduSkills OECD
Iván Bornacelly, Policy Analyst at the OECD Centre for Skills, OECD, presents at the webinar 'Tackling job market gaps with a skills-first approach' on 12 June 2024
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.
Walmart Business+ and Spark Good for Nonprofits.pdfTechSoup
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
Traditional Musical Instruments of Arunachal Pradesh and Uttar Pradesh - RAYH...
TALAT Lecture 2110.02: Product information structure, business concept and LCA
1. TALAT Lecture 2110.02
Product Information Structure, Business Concept and
Life Cycle Assessment
13 pages, 9 figures
Advanced Level
prepared by Sigurd Støren and Tor Bækkelund, The Norwegian Institute of
Technology, Trondheim
Objectives:
− to give a brief introduction to the product information structure, a sustainable
business concept and Life Cycle
− to present the product and process "Generic Code" - the chromosomes
− to generate interest about the concept of "Know Your Product", "Life Cycle
Logistics", "Universal Virtues" and "Material/Component Hierarchical Structure" and
their use creating a sustainable business concept.
− to impart knowledge about Life Cycle Assessment
Prerequisites:
− Be familiar with QFD (Quality Functions Deployment) principles
Date of Issue: 1994
EAA - European Aluminium Association
2. 2110.02 Product Information Structure, Business
Concept and Life Cycle Assessment
Table of contents
2110.02 Product Information Structure, Business Concept and Life
Cycle Assessment ____________________________________________2
Introduction ______________________________________________________________ 2
The Product Topological Structure ____________________________________________ 3
The Process Topological Structure ____________________________________________ 4
Know Your Product ________________________________________________________ 5
The Life Cycle Logistics ____________________________________________________ 6
The Universal "Virtues" of the Product or a Technical System ______________________ 7
The Life of a Component - Interaction between Function, Shape, Processing Route,
Microstructure and Properties ________________________________________________ 8
A Business Concept ________________________________________________________ 9
Life Cycle Assessment_____________________________________________________ 11
Reference Literature_______________________________________________________ 13
List of Figures ___________________________________________________________ 13
Introduction
The development of competitive products demands knowledge about market demands,
products and production processes. Product development is complex and existing
products hold a variety of qualities that must be known to the designer and the company
to attain success. The qualities that the product holds are linked to the product
(consumer perceived Quality - big Q) and the production (the production perceived
quality - small q). A thorough understanding of the product and the interdependent
production processes will provide the basis for a successful business.
By use of an organised information structure grounded in the product and the production
characteristics, respectively, it will be possible to get insight where and when
competitiveness is located. In the following we will describe the product and process
topological structures - "the chromosomes" as an introduction to a sustainable business
concept.
TALAT 2110.02 2
3. The Product Topological Structure
During the process of product design, the "anatomy" of the product as a technical system
is established. All the information about the product can be organised and connected in
four levels, the theory of domains [Andreasen]. The levels are similar to the "generic
code" of a biological system, and is termed a product "chromosome".
The domains embrace the total product process (the transformation), the supporting
functions, organs and contributing components, as illustrated in Figure 2110.02.01.
The product topological structure
The product 'generic code' - the chromosome
This product process Product
needs these functions Domain
This function is realised
Function
by these organs
Domain
This organ is realised Organ
by these components Domain
This component Component
contributes to Domain
these organs
alu
Training in Aluminium Application Technologies
Topological Structure of a Product 2110.02.01
The total product process or transformation that the products perform is what the
product is made for (e.g. moving goods or people from A to B). The total product
process domain holds other sub-transformations (e.g. give controllable reduction of
speed of an automobile) contributing to the total product process. Each of these sub-
transformations is prescribed and solved by organising and connecting subsystems in
space [Tjalve]. Each of the subsystems performs specific functions. They are expressed
by a substantive and a verb (e.g. transfer braking power or allowing motion). The
functions describe the functional properties of the product.
One or several organs (interactions between surfaces) realise the described functions.
The organs will provide information about the interplay between the component's
contribution to the realisation of the functions. Each organ may have different
characteristics determining the functional properties of a subsystem. An organ may be
described by its ability to create friction (e.g. the interplay between a brake rotor pad and
the brake rotor). The last domain is the component level consisting of an organised and
interrelated system of components in an assembled structure.
TALAT 2110.02 3
4. A complete product information organised in the chromosome, will provide necessary
insight and expose key competitive parameters within each domain contributing to the
total product process and indirectly the consumers' perception of the product.
The Process Topological Structure
Simultaneously to the creation of the product the related production characteristics are
determined. The production system is determined at different levels/domains similar to
those of the product structure. The structure of the information system, "the process
chromosome", provides the total information of the processes that are needed to create
the product. The process chromosome is illustrated in Figure 2110.02.02.
The process topological structure
The process 'generic code' - the chromosome
Production
This production system System
needs these process lines Domain
This process line is realised
Process line
by these processing units
Domain
This process unit is realised Process unit
by these assemblies Domain
This assembly contributes
to these process units Assembly
Domain
alu
Training in Aluminium Application Technologies
Topological Structure of a Process 2110.02.02
During the process of product design, the processes in the production system are
established. The production system describes the production network and system that
produce the product in production. The product organisation holds different process
lines that produce the different subsystems to the specified system (e.g. wheel system
production). The different processes that contribute to the process line are described as
process units. The brake rotor needs to be cleaned and machined before it is assembled
to the wheel system. The process units' activities prescribe the characteristics to the
organs (e.g. cleaning and machining of casted components). The lowest level of the
production system is the assembly of the interrelated system of components. The
assemblies contribute to the process units.
TALAT 2110.02 4
5. A complete process information organised in a chromosome hierarchical structure will
provide needed insight and expose key production parameters contributing to the
performance of the product.
Know Your Product
The product has an operational life time and the quality of the product is the user's
perception of the product, related to how well the product performs its "transformation".
It may be in absolute terms, related to the users' expectations or his comparison with the
competitors' products. The users of the product can be customers or company internal
"employees" that meet the product respectively under its use or its production. QFD
(Quality Functions Deployment) is a systematic method to investigate the customer's
perception of the product. Data about the market, customers and competitors are
collected and organized to get a true insight where and when the competitiveness in the
product is located. The QFD procedures and matrixes correspond to the domains. A
similar approach to systematize the productions' critical parameters as an underlying
basis is the use of qfd (quality function deployment) collecting and organizing the
small-q information. The small quality function deployment is the similar procedural
approach as the more known big-Q tool revealing the productions' perceived quality. It
includes collecting and organizing data from industry, suppliers and competitors to
reveal the critical production parameters for the product in production
By the concept "Know Your Product", as illustrated in Figure 2110.02.03, we
understand a systematic analysis of a product in production, based on the chromosomes,
with the purpose to identify where the competitiveness of the product is located. In this
way the innovative effort can be directed toward what is of real value for the society and
the individual user.
TALAT 2110.02 5
6. Know your product
Product Process
strategy strategy
The 'voice' of the The 'voice' of
customer production
'QFD' 'qfd'
Collect and organize
data about: Collect and organize
- Market data from:
- Customer - Industry
- Competitors - Suppliers
- Competitors
Key competitive parameters
where and when competitiveness located
alu
Training in Aluminium Application Technologies
Know Your Product 2110.02.03
The Life Cycle Logistics
In the design and product development process, from idea to production planning, the
designer has to make decisions about the shape, dimensions, surface and production of
each component, including material selection and the processing route. The components
and the subsystems have a "life" before they are a part of the product. Also, after the
functional life of the product, the individual subsystems may be discarded, reused or
reprocessed. So each component has a "life" after the "death" of the product itself. By
letting the "product chromosome" follow the product during its operational life, the
history of the product can be monitored in a systematic way; the operational practice, the
mechanical, the chemical and thermal loads, accidents etc. Likewise, any changes of the
components, organs and functions, due to wear, plastic deformation, cracks, changes in
material properties can be followed through the life of the product, as well as
replacement and repair of components or subsystems. The "process chromosome"
operates before and after use, respectively in production and after use when the product
is reprocessed.
With the concept "Life Cycle Logistics" we understand the information about the
geographical transfer and all the information related to the components at the different
stages of its life from "cradle" to "grave". This is illustrated on the Figure 2110.02.04
above the "chromosome".
TALAT 2110.02 6
7. The life cycle logistics
Brake disc
Raw Scrap or
materials recycle
Calliper
Process Assemble Use, Reuse, Repair Dissassemble Reprocess
Quality experienced
quality experienced quality experienced
Operators: Operators:
- Machines - Machines
- Tools & sensors - Tools & sensors
- Displays - Displays
alu
Training in Aluminium Application Technologies
Life Cycle Logistics 2110.02.04
Knowledge of the life cycle of the components and the product serves as a basis together
with the QFD and qfd procedures for design of products, considering the life of the
product and the interdependent environmental impacts.
The Universal "Virtues" of the Product or a Technical System
Seen from a global perspective, where one estimates that the population will increase to
about 12 billion in the next 100 years, and we want that every one of these persons
should live a worthy life, we have to have a measure of each product to test if the one is
more sustainable than the other. With "sustainable" is understood that the product, the
materials and processes used, the production, functional and recycling practice, as well
as the life style related to the product, can be used or practised forever in order to
improve the quality of human life within the carrying capacity of the supporting
ecosystem. The "universal virtues" are measures that can be used for a product, a
subsystem or a component, in order to assess the degree of sustainability of a product or
a component compared to another. It is obvious that we do not have a unique way to
make such a ranking of materials, processes, product and practices. But everybody
should think about it and do as best as he/she can. Improved sustainability can be
"designed" into a product. We look here for measures which the designer can use to
"design for sustainability".
TALAT 2110.02 7
8. Such measures are described at the lowest part of Figure 2110.02.05. They are:
Life cycle costs
Resource consumption: energy & material balance
Safety & reliability
Waste handling
The universal ''virtues'' of a product or a technical system
Quality experienced
quality experienced quality experienced
A
l
l Component
properties S
o i
y z
Process Assemble Use, Reuse, Repair Dissassemble Reprocess e
Life cycle cost
Energy and material balance
Safety and reliability
Waste handling
alu
Training in Aluminium Application Technologies
Universal ''Virtues'' of a Product or a Technical System 2110.02.05
These measures have to consider time steps in the life of the component and the product,
including the source of raw material and all the equipment and chemicals used to
process, use and recycle the product. There is a great need for structure and quantified
information as well as theories and methods for such evaluations.
The Life of a Component - Interaction between Function, Shape,
Processing Route, Microstructure and Properties
In the search for improvements of critical properties of a component, it may be useful to
organise the information related to this particular component as shown on Figure
2110.02.06 [Støren].
The horizontal axis represents the life time of the component, the scale is not linear in
time, it represents the main stages in the life of the component.
The vertical axis represents a logarithmic scale. The distance between the two vertical
lines gives the dimension scale that the figures or the phenomena operate at that vertical
position. At the bottom of the scale, we have the atomic level, dimensional scale 1nm
TALAT 2110.02 8
9. (nanometer). At the top the scale is 1 m, representing the size of the component. At the
top of Figure 2110.02.06, we are at a global scale, reflecting on the global need and
sustainability of the component, the dimensional scale is 1 Mm.
The life of a component
interaction between function, shape,
processing route, microstructure and properties
Casting Assembly
1m Temperature
Heat Strength
Resistance
treatment Joining Component Ductility
Creep
Machining Variability in Corrosion
Forming Surface Fatigue
dimensions & Wear
1 mm treatment Fracture
properties
Toughness
A Surface finish
Grain-size
1 µm l Particle structure
l Master the Master the
o evolution of Cell structure damaging
y Dispersoides
process
microstructure Dislocation structure
1 nm Atomic structure
Raw materials Process Use, Reuse, Repair Dissassemble Reprocess
alu
Training in Aluminium Application Technologies
Life of a Component 2110.02.06
This representation is particular suited for studying and modelling the relation between
alloy constituents, process parameters, microstructural evolution and the many
properties of the alloy-component-system. In computer databases, often 50 or more
properties of the material are given. These properties come from the same
microstructure, some are very sensitive to the microstructure, other properties are not.
By a representation given as above we can focus on the critical properties for the
given shape and dimensions and identify its source at microstructural level, and then
trace back to processing parameters or alloy constituents.
A Business Concept
By the "chromosomes", the "life cycle logistics", "the universal virtues" and the
"material/component hierarchical structure" a complete product, process and market
information are established. The combined use of the "Know Your Product" concept,
the life cycle logistics and the material/component hierarchical structure constitute a
business concept, that is well suited to expose the competitiveness of the product in
production and the company's business as a whole. The concept is illustrated in Figure
2110.02.07.
TALAT 2110.02 9
10. Business concept
''Q F D '' ''q fd ''
- M a rk e t - I n d u s tr y
- C u s t o m e rs - S u p p lie r s
- C o m p e t it o r s - C o m p e t it o r s
K e y c o m p e t itiv e p a ra m e te r s
w h e r e a n d w h e n is c o m p e t itiv e n e s s lo c a te d
C om ponent
p ro p e r tie s
P r o c e s s A s s e m b le U s e , R e u s e , R e p a ir D is a s s e m b le R e p ro c e s s
L ife c y c le c o s t
E n e r g y a n d m a t e r ia l b a la n c e
S a f e ty a n d r e lia b ility
W a s t e h a n d lin g
alu
Training in Aluminium Application Technologies
Business Concept 2110.02.07
Knowledge about critical technical, economic and ecological parameters will provide a
foundation for the creation of a business concept using daily business performance
indicators as input to develop market, product and production strategies. The output
of the analysis will be knowledge about these key competitive parameters and future
areas of emphasis in the design process.
The business concept structure demands well-organised data within all categories, a
common understanding of sustainability, accessible technological, ecological and
economical data besides a commitment from individuals involved. A common
knowledge and information database will provide input to the different assessment tools
providing data to the business concept. These assessment tools are:
− A Personal Environmental Accounting system that analyses each individual's
consumption of products and services. The consumption of product and services
are a major source for improvements besides the importance of environmental
consciousness among designers and users of products.
− The Industrial Ecology assesses the interactions between the industrial man-
made system and the natural system evaluating flows of materials and energy
between them.
− The Product Life Cycle Assessment includes analysis of the environmental
impacts the product and belonging processes dictates in addition to improvement's
analysis.
TALAT 2110.02 10
11. − The Product and Process technology assessment evaluate, respectively, the
product and process technology that is necessary to satisfy the economic and
ecological demands.
An overview of the business concept, the assessment tools and improvement activities is
illustrated in Figure 2110.02.08.
Business concept
Vision Targets Strategies
Market Market
Product Product
Production Production
Business
Personal Life
Design
performance Industrial Product Process
Ecological Cycle tools
indicators Ecology Techn. Techn.
Account Assessm.
Knowledge & Information Database
Energy Materials Waste Safety Reliability Life cycle cost
alu
Training in Aluminium Application Technologies
Business Concept (2) 2110.02.08
The business concept structure is well suited for computer software programming and
visualisation. Within this environment, "design for sustainability" should be carried out.
In the Nordic countries the first step is taken in this direction by the development of the
software ALULIB/ALUBOOK based on the "chromosome" concept. (SkanAluminium
project "Design with aluminium")
Life Cycle Assessment
The life cycle assessment is an objective process to evaluate the environmental burdens
associated with a product, process or activity by identifying and quantifying energy and
materials used and wastes released to the environment, to assess the impact of those
energy and material uses and releases to the environment, and to evaluate and
implement opportunities to affect environmental improvements. The assessment
includes the entire life cycle of the product, process or activity, encompassing extracting
TALAT 2110.02 11
12. and processing of raw materials, manufacturing, transportation and distribution, use, re-
use, maintenance, recycling and final disposal. LCA is:
A scientific analysis and evaluation of potential environmental and health
impacts of a product system, throughout its entire life cycle.
Life cycle assessment
! General principles
2. Impact Assessment 3. Improvement
- Classification Assessment
- Characterization
- Valuation
Goal Definition
and
Scoping
1. Inventory analysis
- Resource acquisition
- Manufacturing
- Use
- Waste management
alu
Training in Aluminium Application Technologies
Life Cycle Assessment - General Principles 2110.02.09
The LCA includes three steps which are inventory, impact and improvement
assessment, see Figure 2110.02.09.
Life Cycle Inventory is an objective, data-based process of quantifying energy and raw
materials requirement, air emissions, waterborne effluents, solid waste and other
environmental releases incurred throughout the life cycle of a product, process or
activity.
Life Cycle Impact Assessment is a technical, quantitative and/or qualitative process to
characterise and assess the effects of the environmental loadings identified in the
inventory component. The assessment should address both ecological and human health
considerations, as well as other effects such as habitat modification and noise pollution.
Life Cycle Improvement Analysis is a systematic evaluation of the needs and
opportunities to reduce the environmental burden associated with energy and raw
materials use and waste emissions throughout the whole life cycle of a product, process
or activity. This analysis may include both quantitative and qualitative measures of
improvement, such as changes in product design, raw materials use, industrial
processing, consumer use and waste management.
Product development or product design consists of different phases, which can be
structured in a variety of ways. Market, process and product analysis serve as input to
the development activities: concept, form design and detailing. In each phase different
decisions are taken regarding the product and the production, selecting the best
TALAT 2110.02 12
13. solutions. The best solution can only be determined when the designer has access to
necessary data and when he/she is able to use the data as basis for trade-off's, sensitivity
and error analysis. The found key competitive parameters should be focused and
handled along with all acting parameters. A successful product assessment involves
quantitative and qualitative aspects considering ecological, technical and economic
problems in all development phases. Life Cycle Assessment serves as a basic tool to
analyse the product in production or as support to environmental sound decisions in
product development.
Reference Literature
1. Eskild Tjalve: "Systematische Formgebung für Industrieprodukte", VDI-Verlag,
1978, ISBN 3-18-419053-6.
2. Mogens Myrup Andreasen: "Theories and methods of synthesis (theory of
domains), thesis, University of Lund, Sweden, 1981.
3. Sigurd Støren: "Extruded Aluminium Sections. Principles for Optimal design and
Alloy Selection" In Modern Design Principles (Ed. K. Jacobsen) Tapir Trondheim
1988.
4. SETAC-Society of environmental Toxicology and Chemistry: "Guidelines for
Life Cycle Assessment: A 'Code of practice', SETAC-Europe, 1200 Brussels,
Belgium, 1993.
5. UETP/Environmental Engineering Education: Environmental assessment of
products: A course on Life Cycle Assessment", The Finnish Assoc. for graduate
engineers, Helsinki, 1993, ISBN 951-9110-83-6.
List of Figures
Figure No. Figure Title (Overhead)
2110.02.01 Topological Structure of a Product
2110.02.02 Topological Structure of a Process
2110.02.03 Know Your Product
2110.02.04 Life Cycle Logistics
2110.02.05 Universal ″Virtues“ of a Product or a Technical System
2110.02.06 Life of a Component
2110.02.07 Business Concept
2110.02.08 Business Concept (2)
2110.02.09 Life Cycle Assessment - General Principles
TALAT 2110.02 13