TailoredCoatSpecSht
•
0 likes•526 views
This document is a spec sheet for a tailored wool and cashmere coat with leather accents and a grey wolf fur collar from the Fall 2012 collection. It provides detailed measurements for the size 4 garment, including dimensions for the neck, shoulders, chest, waist, hips, sleeves, pockets and other features. The coat has a high neckline, princess seams, two front pockets and a detachable belt. It is made of 85% wool and 15% cashmere with 100% leather accents on the sleeves.
Report
Share
Report
Share
Download to read offline
Recommended
Safari Cascade Jacket Tech Pack
This document provides the construction details and measurements for a sample "Safari Cascade Jacket" designed by Erik Olsen for spring 2011. It lists specifics on seam types, topstitching, labels, linings, darts, eyelets, elastic, and other details. The bulk of the document presents initial specifications and measurements for the sample, with no changes needed from the original specs. The jacket was not approved.
Jacket Tech Pack
This specification worksheet provides details for a faux double-breasted jacket with a removable hood made of 100% recycled polyester poplin rib weave fabric. It includes 38 measurement points and sketches of the front and back views indicating where the measurements should be taken. The style is intended to be produced in sizes XS through XL for the Holden Outerwear brand in the Fall 2012 season.
Single Breasted Blazer Tech Pack
Tech pack with detailed garment specifications and construction details for a single breasted fitted blazer. Additional analysis is provided for the choices made and how these affect the quality and price of the garment.
Box Pleated Dress Tech Pack
Tech pack with detailed garment specifications and construction details for a box pleated dress. Additional analysis is provided for the choices made and how these affect the quality and price of the garment.
Pc Navy Jacket And Spec
The 'PC' Navy Jacket is a water resistant and breathable jacket designed for motorcyclists. It has undergone two years of testing and development to be tough, lightweight yet warm. It features fleece lining, embossed popper buttons, an embroidered logo, pockets, a storm flap with Velcro closure, a curved rear hem for a perfect fit with body armor, and extra length and width in sleeves and shoulders for mobility. The jacket is intended for all-weather use both on and off the motorcycle in navy or red color options across a wide range of sizes.
Jacket - Tech pack example
This document provides details for a pleather jacket with PU lace inserts for Spring 2015. It includes information on fabrics, construction details, and labeling. The jacket will be made of poly/spandex neoprene and PU leather, with the latter used for lace inserts on the sleeves and back yoke. Other features include zipper pockets and sleeves. Labeling will include a main label, size label, hang tag, and care label.
Golf clubs - R&C Brief 19/2015
Grant Thornton UK LLP is a member firm of Grant Thornton International Ltd (GTIL) that provides assurance, tax, and advisory services. GTIL and each of its member firms are separate legal entities not bound as partners. This publication is intended as guidance only and Grant Thornton assumes no liability for any actions taken based on its content.
spec sheet of shirt
This document is a technical specification for a men's white cotton canvas shirt. It includes details of the designer, fabric, measurements, labeling, and an order for 10,000 shirts. Sketches and charts provide front, back, sleeve, and collar views and measurements for sizes S-XXL. The shirt is to be made of 100% cotton canvas fabric, with white buttons and label details specified.
Recommended
Safari Cascade Jacket Tech Pack
This document provides the construction details and measurements for a sample "Safari Cascade Jacket" designed by Erik Olsen for spring 2011. It lists specifics on seam types, topstitching, labels, linings, darts, eyelets, elastic, and other details. The bulk of the document presents initial specifications and measurements for the sample, with no changes needed from the original specs. The jacket was not approved.
Jacket Tech Pack
This specification worksheet provides details for a faux double-breasted jacket with a removable hood made of 100% recycled polyester poplin rib weave fabric. It includes 38 measurement points and sketches of the front and back views indicating where the measurements should be taken. The style is intended to be produced in sizes XS through XL for the Holden Outerwear brand in the Fall 2012 season.
Single Breasted Blazer Tech Pack
Tech pack with detailed garment specifications and construction details for a single breasted fitted blazer. Additional analysis is provided for the choices made and how these affect the quality and price of the garment.
Box Pleated Dress Tech Pack
Tech pack with detailed garment specifications and construction details for a box pleated dress. Additional analysis is provided for the choices made and how these affect the quality and price of the garment.
Pc Navy Jacket And Spec
The 'PC' Navy Jacket is a water resistant and breathable jacket designed for motorcyclists. It has undergone two years of testing and development to be tough, lightweight yet warm. It features fleece lining, embossed popper buttons, an embroidered logo, pockets, a storm flap with Velcro closure, a curved rear hem for a perfect fit with body armor, and extra length and width in sleeves and shoulders for mobility. The jacket is intended for all-weather use both on and off the motorcycle in navy or red color options across a wide range of sizes.
Jacket - Tech pack example
This document provides details for a pleather jacket with PU lace inserts for Spring 2015. It includes information on fabrics, construction details, and labeling. The jacket will be made of poly/spandex neoprene and PU leather, with the latter used for lace inserts on the sleeves and back yoke. Other features include zipper pockets and sleeves. Labeling will include a main label, size label, hang tag, and care label.
Golf clubs - R&C Brief 19/2015
Grant Thornton UK LLP is a member firm of Grant Thornton International Ltd (GTIL) that provides assurance, tax, and advisory services. GTIL and each of its member firms are separate legal entities not bound as partners. This publication is intended as guidance only and Grant Thornton assumes no liability for any actions taken based on its content.
spec sheet of shirt
This document is a technical specification for a men's white cotton canvas shirt. It includes details of the designer, fabric, measurements, labeling, and an order for 10,000 shirts. Sketches and charts provide front, back, sleeve, and collar views and measurements for sizes S-XXL. The shirt is to be made of 100% cotton canvas fabric, with white buttons and label details specified.
Nursing Top Costing Sheet
This costing worksheet provides information for a style numbered 48-c379 for season R11. It includes details of the fabrics, estimated costs, labor estimates, wholesale pricing options, and relevant dates. The raw material costs are estimated to be $5.19 per unit and labor is estimated at $4 per unit. With a 30% markup, the price point 5 wholesale price would be $11.95. The estimated cost of goods sold is 43% but the actual may be lower at 18%.
Sample tech pack
Sample of poms produced for a silk charmeuse dress with a chiffon overlay on the waist and skirt. Chiffon is also used for the cascading sleeves.
Spec Sheet of a casual shirt
This document provides the specifications and measurements for a half sleeve casual shirt in size S, including dimensions for the collar, chest, waist, hem, sleeves, shoulder width, and pocket placement and sizing. Key measurements include a 16 1/8 inch collar, 21 inch chest, 19 1/2 inch waist, 10 inch sleeve length, and 30 inch lengths for the front and back.
How to Develop Product Specifications for Fashion Design.
Slide show presentation of how to Develop Product Specifications for Fashion Design.
Session 1 - task 1 and 2
Includes:
resources
assessment tasks (introduction)
key features
top, middle and bottom of sample specification
'graded spec'
task 1
measuring a garment (introduction)
crtical points
Spec Pack
The document provides specifications for a replica NASCAR jacket, including details about the fabric, trims, labels, and factories involved in production. It lists the technical designer, fabric vendor, factories, fabric used (100% nylon sailcloth), style number, size range, and sample size. It then provides pages of information on the fabrics, trims, and labels used - including item numbers, materials, sizes, colors, and contact information for each vendor.
Summer dress-Tech pack example
This document provides construction details for a garment including a hi-low hem, elastic waist, macrame yoke with tassels, binding, back elastic, and macrame straps. Measurements are given for strap lengths and spacing. Labeling instructions are also included.
Pc Navy Breeches And Spec
These PC riding out breeches are made of water resistant and windproof nylon with a slim cut and great fit. They have embroidered logos, embossed popper buttons, belt hoops, long knee patches, and zip pockets. They are designed to have an elevated rear waist that complements the curvature of the matching jacket to prevent cold backs. They come in navy and sizes xxs to xxl.
Pc Red Jacket And Spec
The 'P.C' Red Jacket is an all-weather motorcycle jacket developed over two years of testing to be as tough as the toughest riders. It is water resistant and breathable on the outside with a lightweight fleece lining, and features embroidered logos, outer pockets, an inner phone pocket, contrasting storm flaps, and a curved rear hem for a perfect fit with or without body armor. The extra-length sleeves and wide shoulders allow for maximum movement and flexibility both on and off the bike.
Azzaro Vest Tech Pack
This document contains production details for a piped fitted short vest designed by Azzaro for Spring 2011. It includes construction notes, initial specifications and measurements for a size small sample, and corrections to be made. The sample measurements differed slightly from the initial specs, requiring adjustments such as lengthening the front 1 inch and bringing the neck width and circumference back to specification. Production approval was given with the noted corrections.
Seam ( 22 types)
This document provides information on various stitch types used in garment manufacturing, including their names, machine types used, thread counts, and common uses. It describes stitches such as single thread chain stitch used for temporary joining, lock stitches for topstitching, zigzag stitches for elastic attachment, and multi-thread chain stitches for hemming and decorative purposes. The document focuses on Juki brand machines that produce stitches ranging from basic single-thread types to more complex cover stitches using multiple needles and threads.
T shirt tech pack
This document contains specifications for a men's t-shirt including style details, sizing information, fabric content, and print details. Key details include:
- Product is a men's spring t-shirt made of 100% cotton with a GSM of 180
- Sizes range from M-XL in a 1:2:3 ratio
- Measurements are provided for the front, back, chest, waist, bottom, armhole, sleeve length, upper sleeve, and sleeve opening
- Screen prints on the front include a logo in multiple colors and text and on the back include a logo and numbers identifying color codes.
T shirt spech sheet 2nd part
T shirt spech sheet 2 nd part: Fabric details, Trims & Accessories, Label details, Neck line details, Seam details
Stitches and seam analysis of a polo t shirt
This document analyzes the stitches and seams used in a men's t-shirt. It identifies the garment parts and provides details on the brand, size, fabric, and needle used. For each garment part, including the collar, placket, label, sleeves, hem, and side seams, it lists the stitch type and sewing machine used, as well as an alternative option. In total, it examines the construction of the t-shirt and the specific stitches for attaching each component.
The Fashion Cycle 97 2003
The document discusses the fashion cycle and theories of fashion movement. It explains the stages of the fashion cycle as introduction, rise, peak, decline, and obsolescence. Fashions move through this cycle at different rates, with some becoming classics that remain popular for longer. Fads are short-lived trends. Factors like consumer acceptance, economics, and marketing influence how fashions move through the cycle. Theories of how trends diffuse include the trickle-down theory of high-status groups influencing trends, and the trickle-up theory of lower-status groups starting trends that spread upwards.
Phantom bills of material
This document discusses phantom bills of material in Oracle. It defines phantom components as those that can be assigned to bill of material subassemblies and are treated as directly connected to the parent assembly. Phantoms are planned like other assemblies by Oracle MRP but ignore certain planning constraints. Phantom material costs roll up to higher assemblies but routing costs do not. The document provides examples of how phantoms simplify bills of material by eliminating intermediate subassembly levels and jobs. However, care must be taken as phantoms are sometimes misused to improperly flatten bills of material.
Polo shirt
The document presents information from a presentation on polo shirts, including:
- A definition of a polo shirt and the history of how it was developed by Rene Lacoste.
- Descriptions of the anatomy and parts of a polo shirt such as the collar, placket, buttons, cuff, tape, side seam, side vent, extended tail, and hem.
- Explanations of different types of seams and stitches used in polo shirt construction such as superimposed seams, lapped seams, bound seams, lock stitches, and overlock stitches.
- An analysis of the specific seams and stitches used in different areas of a basic polo
Garment engineering booklet
The document outlines the process for creating a jacket, from fabric identification to the finished product. It discusses identifying natural and synthetic fabrics through burn testing and the differences between the two. It then details the steps taken to create the pattern pieces for the jacket, including drawing the front block, adding a collar and rever, and extending and adjusting the pieces as needed. Reflections are provided on the process and lessons learned regarding fabric identification and building pattern cutting skills. The overall goal is to create a half jacket and develop skills that can be applied to future garment projects.
Bill Of Materials
This presentation was developed to show how critical BOM\'s are to the business planning and decision making process
đồ áN ngành may triển khai sản xuất mã hàng áo jacket 2 lớp nửa bó sát 2 túi ...
Giá 20k/ 5 lần download -Liên hệ: www.facebook.com/garmentspace Chỉ với 20k THẺ CÀO VIETTEL bạn có ngay 5 lượt download tài liệu bất kỳ do Garment Space upload, hoặc với 100k THẺ CÀO VIETTEL bạn được truy cập kho tài liệu chuyên ngành vô cùng phong phú Liên hệ: www.facebook.com/garmentspace
More Related Content
Viewers also liked
Nursing Top Costing Sheet
This costing worksheet provides information for a style numbered 48-c379 for season R11. It includes details of the fabrics, estimated costs, labor estimates, wholesale pricing options, and relevant dates. The raw material costs are estimated to be $5.19 per unit and labor is estimated at $4 per unit. With a 30% markup, the price point 5 wholesale price would be $11.95. The estimated cost of goods sold is 43% but the actual may be lower at 18%.
Sample tech pack
Sample of poms produced for a silk charmeuse dress with a chiffon overlay on the waist and skirt. Chiffon is also used for the cascading sleeves.
Spec Sheet of a casual shirt
This document provides the specifications and measurements for a half sleeve casual shirt in size S, including dimensions for the collar, chest, waist, hem, sleeves, shoulder width, and pocket placement and sizing. Key measurements include a 16 1/8 inch collar, 21 inch chest, 19 1/2 inch waist, 10 inch sleeve length, and 30 inch lengths for the front and back.
How to Develop Product Specifications for Fashion Design.
Slide show presentation of how to Develop Product Specifications for Fashion Design.
Session 1 - task 1 and 2
Includes:
resources
assessment tasks (introduction)
key features
top, middle and bottom of sample specification
'graded spec'
task 1
measuring a garment (introduction)
crtical points
Spec Pack
The document provides specifications for a replica NASCAR jacket, including details about the fabric, trims, labels, and factories involved in production. It lists the technical designer, fabric vendor, factories, fabric used (100% nylon sailcloth), style number, size range, and sample size. It then provides pages of information on the fabrics, trims, and labels used - including item numbers, materials, sizes, colors, and contact information for each vendor.
Summer dress-Tech pack example
This document provides construction details for a garment including a hi-low hem, elastic waist, macrame yoke with tassels, binding, back elastic, and macrame straps. Measurements are given for strap lengths and spacing. Labeling instructions are also included.
Pc Navy Breeches And Spec
These PC riding out breeches are made of water resistant and windproof nylon with a slim cut and great fit. They have embroidered logos, embossed popper buttons, belt hoops, long knee patches, and zip pockets. They are designed to have an elevated rear waist that complements the curvature of the matching jacket to prevent cold backs. They come in navy and sizes xxs to xxl.
Pc Red Jacket And Spec
The 'P.C' Red Jacket is an all-weather motorcycle jacket developed over two years of testing to be as tough as the toughest riders. It is water resistant and breathable on the outside with a lightweight fleece lining, and features embroidered logos, outer pockets, an inner phone pocket, contrasting storm flaps, and a curved rear hem for a perfect fit with or without body armor. The extra-length sleeves and wide shoulders allow for maximum movement and flexibility both on and off the bike.
Azzaro Vest Tech Pack
This document contains production details for a piped fitted short vest designed by Azzaro for Spring 2011. It includes construction notes, initial specifications and measurements for a size small sample, and corrections to be made. The sample measurements differed slightly from the initial specs, requiring adjustments such as lengthening the front 1 inch and bringing the neck width and circumference back to specification. Production approval was given with the noted corrections.
Seam ( 22 types)
This document provides information on various stitch types used in garment manufacturing, including their names, machine types used, thread counts, and common uses. It describes stitches such as single thread chain stitch used for temporary joining, lock stitches for topstitching, zigzag stitches for elastic attachment, and multi-thread chain stitches for hemming and decorative purposes. The document focuses on Juki brand machines that produce stitches ranging from basic single-thread types to more complex cover stitches using multiple needles and threads.
T shirt tech pack
This document contains specifications for a men's t-shirt including style details, sizing information, fabric content, and print details. Key details include:
- Product is a men's spring t-shirt made of 100% cotton with a GSM of 180
- Sizes range from M-XL in a 1:2:3 ratio
- Measurements are provided for the front, back, chest, waist, bottom, armhole, sleeve length, upper sleeve, and sleeve opening
- Screen prints on the front include a logo in multiple colors and text and on the back include a logo and numbers identifying color codes.
T shirt spech sheet 2nd part
T shirt spech sheet 2 nd part: Fabric details, Trims & Accessories, Label details, Neck line details, Seam details
Stitches and seam analysis of a polo t shirt
This document analyzes the stitches and seams used in a men's t-shirt. It identifies the garment parts and provides details on the brand, size, fabric, and needle used. For each garment part, including the collar, placket, label, sleeves, hem, and side seams, it lists the stitch type and sewing machine used, as well as an alternative option. In total, it examines the construction of the t-shirt and the specific stitches for attaching each component.
The Fashion Cycle 97 2003
The document discusses the fashion cycle and theories of fashion movement. It explains the stages of the fashion cycle as introduction, rise, peak, decline, and obsolescence. Fashions move through this cycle at different rates, with some becoming classics that remain popular for longer. Fads are short-lived trends. Factors like consumer acceptance, economics, and marketing influence how fashions move through the cycle. Theories of how trends diffuse include the trickle-down theory of high-status groups influencing trends, and the trickle-up theory of lower-status groups starting trends that spread upwards.
Phantom bills of material
This document discusses phantom bills of material in Oracle. It defines phantom components as those that can be assigned to bill of material subassemblies and are treated as directly connected to the parent assembly. Phantoms are planned like other assemblies by Oracle MRP but ignore certain planning constraints. Phantom material costs roll up to higher assemblies but routing costs do not. The document provides examples of how phantoms simplify bills of material by eliminating intermediate subassembly levels and jobs. However, care must be taken as phantoms are sometimes misused to improperly flatten bills of material.
Polo shirt
The document presents information from a presentation on polo shirts, including:
- A definition of a polo shirt and the history of how it was developed by Rene Lacoste.
- Descriptions of the anatomy and parts of a polo shirt such as the collar, placket, buttons, cuff, tape, side seam, side vent, extended tail, and hem.
- Explanations of different types of seams and stitches used in polo shirt construction such as superimposed seams, lapped seams, bound seams, lock stitches, and overlock stitches.
- An analysis of the specific seams and stitches used in different areas of a basic polo
Garment engineering booklet
The document outlines the process for creating a jacket, from fabric identification to the finished product. It discusses identifying natural and synthetic fabrics through burn testing and the differences between the two. It then details the steps taken to create the pattern pieces for the jacket, including drawing the front block, adding a collar and rever, and extending and adjusting the pieces as needed. Reflections are provided on the process and lessons learned regarding fabric identification and building pattern cutting skills. The overall goal is to create a half jacket and develop skills that can be applied to future garment projects.
Bill Of Materials
This presentation was developed to show how critical BOM\'s are to the business planning and decision making process
đồ áN ngành may triển khai sản xuất mã hàng áo jacket 2 lớp nửa bó sát 2 túi ...
Giá 20k/ 5 lần download -Liên hệ: www.facebook.com/garmentspace Chỉ với 20k THẺ CÀO VIETTEL bạn có ngay 5 lượt download tài liệu bất kỳ do Garment Space upload, hoặc với 100k THẺ CÀO VIETTEL bạn được truy cập kho tài liệu chuyên ngành vô cùng phong phú Liên hệ: www.facebook.com/garmentspace
Viewers also liked (20)
How to Develop Product Specifications for Fashion Design.
How to Develop Product Specifications for Fashion Design.
đồ áN ngành may triển khai sản xuất mã hàng áo jacket 2 lớp nửa bó sát 2 túi ...
đồ áN ngành may triển khai sản xuất mã hàng áo jacket 2 lớp nửa bó sát 2 túi ...
TailoredCoatSpecSht
- 1. Tailored Coat Spec Sheet NAME: Gabriela Huttera DATE: 5.14.2012 SEASON: Fall 2012 STYLE: SIZE: 4 LABEL: DESCRIPTION: Cashmere Coat with Leather accents on Sleeve and Grey Wolf Fur Collar FABRICATION: 85% Wool 15% Cashmere ; 100% Leather ACCESSORIES: Metal Buckle TRIM: FRONT BACK TOTAL COMMENTS 1 NECK DROP 5.25 a. From HPS @ CB 0.25 Front View 2 NECK – WIDTH 7.00 a. NECK CIRCUMFERENCE 19.00 3 SHOULDER – LENGTH 6.00 4 ACROSS SHOULDER 16.00 16.50 32.50 5 ACROSS BACK 16.00 6 LENGTH * a. From HPS 46.00 46.00 b. @ CF/CB 39.75 45.75 c. Side 36.00 7 HPS TO UNDERARM 10.00 9.5 8 ACROSS CHEST 16.50 16.50 33.00 9 HPS TO WAIST 17.00 17.00 10 Front Waist @ Side seam to Side seam 20.00 11 BOTTOM EDGE OPENING (sweep) 34.50 35.50 70.00 12 ARMHOLE CIRCUMFERENCE 9.50 9.00 18.50 13 PRINCESS SEAM PLACEMENT a. From HPS b. From Princess seam to Princess seam @ chest 10.50 9.00 c. From Princess seam to Princess seam @ waist 9.50 8.00 d. From Princess seam to Princess seam @ sweep 19.75 18.75 14 SIDE PANEL WIDTH a. Princess seam to side seam @ Armhole b. Princess seam to Side Seam @ Waist 4.25 4.25 c. Princess seam to Side seam @ Sweep 10.25 9.75 15 COLLAR WIDTH a. @ CENTER BACK 5.00 b @ POINT 4.00 16 LAPEL WIDTH @ POINT 5.00 17 SLEEVE – LENGTH * a. Overarm 25.00 b. Underarm 18.00 Back View c. CB 34.50 d. HPS 30.50 18 UPPER SLEEVE WIDTH 6.50 6.50 13.00 19 ELBOW 6.50 6.50 13.00 20 SLEEVE HEM OPENING 5.25 5.25 10.50 21 ACROSS WAIST 18.00 17.00 35.00 22 ACROSS LOW HIPS 22.00 21.00 43.00 23 DEPTH OF SLEEVE HEM 2.00 2.00 24 POCKET A a. Placement – Distance from HPS b. Placement – Distance From CF c. Pocket width d. Pocket length e. Pocket flap width f. Pocket flap length 25 POCKET B a. Placement – Distance from HPS b. Placement – Distance From CF c. Pocket width d. Pocket length e. Pocket flap width f. Pocket flap length 26 Belt a. Width 2.00 b. Length 40.00 27 HEM @ Sweep 2 2 28 BUTTON PLACEMENT N/A REMARKS/OTHER SPECS: Stitch: SN .25" from edge -Around the zipper At Front Princess Side seam insert 25" metal zipper-zipper on right side is non functional Four 1" width Leather accents on each sleeve-place first accent 8" down from sleeve cap and 3" apart down. Belt- with metalic buckle. * Circle method for measuring Abbreviations: high point of shoulder (HPS), center front (CF), center back (CB) © 2006 Fairchild Publications, Inc. Front Collar detail. Back Collar detail. Belt detail.