SUC Brasil 2012 : Sima for Marine Operations

•

1 like•1,411 views

Presentation of SIMA, a pre ans post processor from Marintek for Riflex and Simo. Presented at SUC by Joe Zhang from DNV.

SesamTM
40 years of success
Introducing Sima for marine operations

Fan Joe Zhang & Ole Jan Nekstad

5 November 2012

Background & motivation for
developing Sima – a new
graphical front end for Simo and
Riflex for marine operations

Sima for marine operations
5 November 2012
© Det Norske Veritas AS. All rights reserved. 2

Background
In 2001 Norsk Hydro replaced flexible risers
at Njord
- Norsk Hydro has merged with Statoil

Damages occurred in adjacent risers during
replacement

Development of a simulator for
familiarization and training initiated

Sima for marine operations
5 November 2012
© Det Norske Veritas AS. All rights reserved. 3

Motivation
Simulating boarding
Engineering
- Quality assurance
- Feasibility evaluation
- Distinguish the really challenging tasks
from the seemingly challenging tasks

Preparation for the actual operation
- Improve HSE performance
Simulating pipelaying
- Familiarization
- Cross – disciplinary communication

Decision support during actual
operation:
- Online monitoring
- Visibility
- What – if – analysis

Sima for marine operations
5 November 2012
© Det Norske Veritas AS. All rights reserved. 4

Sima and DeepC
Sima – marine operations where DeepC – mooring and riser
Simo and Riflex is used analysis where Simo and Riflex is
used – includes code checking and
fatigue of risers

Sima for marine operations
5 November 2012
© Det Norske Veritas AS. All rights reserved. 5

Introduction to Sima

Sima for marine operations
5 November 2012
© Det Norske Veritas AS. All rights reserved. 6

What is Sima
A complete tool for simulation of
marine operations, from modelling
to results
Build upon “state of the art”
software for dynamic analysis
Graphical user interface makes
modelling fast and easy
Developed together with Marintek
and Ceetron
Exclusively marketed and sold by
DNV Software

Sima for marine operations
5 November 2012
© Det Norske Veritas AS. All rights reserved. 7

Extensively tested prior to release
Under the supervision of

- Functionality testing
- Usability
- 2011 – 2012

Will be released Q4/2012

Sima for marine operations
5 November 2012
© Det Norske Veritas AS. All rights reserved. 8

Functionality
Modelling
- Graphical user interface

Analysis
- Time domain
- Interactivity

Result presentation
- Integrated post processor
- 3D visualisation
- Seabed/ infrastructure integration

Sima for marine operations
5 November 2012
© Det Norske Veritas AS. All rights reserved. 9

System Modelling: GUI

Sima for marine operations
5 November 2012
© Det Norske Veritas AS. All rights reserved. 10

Flexibility
Easy to modify parameters and to run several simulations

Sima for marine operations
5 November 2012
© Det Norske Veritas AS. All rights reserved. 11

Post-processing
Intuitive user interface

“Fast results”

Transparent (QC/QA)

Sima for marine operations
5 November 2012
© Det Norske Veritas AS. All rights reserved. 12

Examples of use

Sima for marine operations
5 November 2012
© Det Norske Veritas AS. All rights reserved. 13

Exploring new installation methods

Sima for marine operations
5 November 2012
© Det Norske Veritas AS. All rights reserved. 14

Leg Turbine Platform Analysis – Feasibility study

Sima for marine operations
5 November 2012
© Det Norske Veritas AS. All rights reserved. 15

Marine operations at Sheringham Shoal

Sima for marine operations
5 November 2012
© Det Norske Veritas AS. All rights reserved. 16

Scandi Acergy installing Gjoa template

Sima for marine operations
5 November 2012
© Det Norske Veritas AS. All rights reserved. 17

Demo case

Sima for marine operations
5 November 2012
© Det Norske Veritas AS. All rights reserved. 22

Safeguarding life, property
and the environment

www.dnv.com

Sima for marine operations
5 November 2012
© Det Norske Veritas AS. All rights reserved. 36

The document discusses how the Sesam software can help efficiently engineer topside structures. Sesam allows users to model topside structures, apply loads like deadweight, wind, and waves, analyze the structure, check codes, and iterate the design. Key capabilities mentioned include modeling complex geometries, importing loads from separate dynamic analysis programs, evaluating stresses and code checks, and performing fatigue analysis using deterministic, stochastic, or time-domain methods. The software aims to save engineering time through an integrated workflow.

SUC Brasil 2012 : The New Sesam Manager

João Henrique Volpini Mattos

The document discusses the new Sesam Manager software. Sesam Manager provides a single environment for different structural analysis applications and helps users establish best practices for analysis workflow. It offers benefits like drag and drop functionality, file management tools, scripting for reusing previous work, and support for basic to comprehensive analyses. The new version is being released in December 2012 and offers improvements like application version management and a more intuitive interface.

SUC Brasil 2012 : GeniE Recent Releases

João Henrique Volpini Mattos

SUC Brasil 2012 : Importing Models to Sesam GeniE

João Henrique Volpini Mattos

SUC Brasil 2012 : Next Generation Hydrod and Recent Development in Hydrod

João Henrique Volpini Mattos

The document discusses improvements and new features in the next generation of Sesam HydroD software. Key updates include improved algorithms for hydrostatic calculations, new reporting functionality for stability and analysis, and changes to allow reuse of models and integration of different file types. The software will also include enhanced user interface templates, an improved activity monitor, and support for add-ins. Recent developments in modeling tank dynamics are highlighted, including accounting for internal fluid radiation and restoring forces within each tank for increased accuracy.

GeniE : Parametric Modelling and Importing of Offset Tables

João Henrique Volpini Mattos

Sesam is a parametric modeling software that has been successfully used for 40 years. It allows users to create models by writing script code that uses variables and reference points, allowing models to be easily modified by changing input parameters and re-running the script. Scripting also enables custom applications to be developed for engineering tasks and the import of offset tables from other software.

Sesam - A Complete System for Strength Assessments of Fixed Structures

João Henrique Volpini Mattos

Sesam is a 40-year old complete system for assessing the strength of fixed offshore structures. It provides efficient modeling, analysis, code checking, and redesign capabilities. Key features include parametric modeling, automatic load definitions from equipment, hydrodynamic analysis, pile-soil interaction modeling, beam and plate code checking, fatigue analysis, and fast updating of models and results. The system aims to save engineering time through its integrated workflow and design loop capabilities.

Sesam - Efficient Engineering of Topside Structures

João Henrique Volpini Mattos

Sesam is software for efficiently engineering topside structures. It saves man-hours and increases quality by enabling fast and iterative design using capabilities for structure modeling, load and environment modeling, analysis, and code checking. Key benefits include efficient data transfer throughout the design process, fast member code check iterations without reanalyzing the full model, and efficient model updates based on code check results.

This document describes a study comparing coupled and de-coupled dynamic analyses of an FPSO, its mooring lines, and risers. A coupled analysis considers the full interaction between the FPSO, moorings, and risers, while a de-coupled analysis analyzes them separately. The study finds that a coupled analysis more accurately captures damping effects, mean current loads, and the influence of moorings and risers on FPSO motions. It presents results of a case study comparing the two methods for an FPSO in the Campos Basin, finding differences in predicted offset, tension, and response.

Suc Brasil 2012 : Sesam for SURF

João Henrique Volpini Mattos

Capítulo 3 dados e sinais (1º unidade)

Faculdade Mater Christi

SUC Brasil 2012 : Optimization of a Floating Platforms Mooring System Based o...

João Henrique Volpini Mattos

This document discusses the optimization of a floating platform mooring system using a genetic algorithm. It describes using Mimosa software to analyze the mooring system and calculate platform responses under different environmental conditions. An objective function is formulated to minimize platform offset, and a genetic algorithm is implemented using this objective function to optimize mooring line properties like length, size, and material. As a case study, the genetic algorithm was used to optimize the mooring system of a floating unit with 10 lines, reducing platform responses by up to 3.5 times compared to an ordinary design.

Análise de Carregamento Hidrodinâmico em Estruturas Flutuantes - Parte I A Ex...

João Henrique Volpini Mattos

SUC Brazil 2012 : Analysis of Equipment Foundations of a Laydeck Barge

João Henrique Volpini Mattos

Análise de Carregamento Hidrodinâmico Em Estruturas Flutuantes - Parte II A R...

João Henrique Volpini Mattos

O documento apresenta uma introdução sobre análise de carregamento hidrodinâmico em estruturas flutuantes, discutindo os seis graus de liberdade de movimento de uma unidade flutuante e como ondas afetam sua segurança, conforto e desempenho. É apresentado um sistema massa-mola idealizado para modelagem de vibração e introduzidos conceitos como números complexos, série e transformada de Fourier para análise de sinais.

SUC Brasil 2012 : Engineering Study for Barge Lifting Weight on Crane Barge O...

João Henrique Volpini Mattos

This engineering study evaluated the structural integrity of using a ballasted barge as the test weight for overload tests of a crane barge with a maximum capacity of 2050 tons. Finite element modeling was conducted using SESAM software to analyze the stresses on the test barge under 5 planned loading conditions up to a maximum of 2255 tons. The results indicated the test barge structure is adequate and the overload tests can proceed in January 2013 as scheduled.

Global samhandling i Aker Solutions

Avanade Norway

Aker Solutions is an oilfield services company that provides products, systems and services for the oil and gas industry worldwide. It has implemented a knowledge sharing platform called Knowledge Arena using Microsoft SharePoint to better enable employees to share knowledge across the large, global organization. The platform includes tools like communities of practice, lessons learned, best practices and an improved search function. To ensure success, Aker Solutions is focusing on change management, communication, training, identifying pilot users, and designing the tools into work processes to motivate knowledge sharing.

Coherence monitoring 101

SL Corporation

This document is a presentation by Everett Williams from SL Corporation about monitoring Oracle Coherence clusters. It discusses the business value of monitoring, how to prepare Coherence for monitoring using JMX and SL's RTView monitor, and how to understand cluster stability and cache utilization. It also provides an overview of SL Corporation as a company focused on monitoring and visualization of enterprise applications and middleware.

DEEP SEA MINERAL EXTRACTION’S TECHNOLOGY APPROACH: A SUPPLIES PERSPECTIVE

iQHub

This document discusses National Oilwell Varco's solutions for deep sea mineral extraction operations. It highlights NOV's integrated solutions including lifting and handling equipment, fluid control systems, vertical transport systems, and riser handling. The document outlines NOV's experience in offshore oil and gas and proposes concepts to develop pilot and commercial scale vessels, technologies, and digital solutions for deep sea mineral extraction. It emphasizes partnerships and a collaborative approach between industry, science, and governments to advance this new field.

Software for survey and engineering at sea

Hydrographic Society Benelux

This document provides an overview of trends in the hydrographic surveying industry from a presentation given by EIVA, a company that provides hydrographic software solutions. It discusses the adoption of 3D modeling and data visualization, increasing data sizes from new sensor technologies, a focus on cost reduction through automation and optimization of workflows. Upcoming developments mentioned include improvements to automated data cleaning algorithms, point cloud processing tools, and more advanced autonomous mission planning capabilities. The presentation concludes by offering a free software package to hydrographic offices and noting EIVA's support of educational uses of their software.

Monitoring of Web Applications and GlassFish for Performance and Availability...

SL Corporation

Stephan Janssen – Founder of Parleys.com, BeJUG and Devoxx – shared his experience in monitoring of their web application infrastructure using the RTView platform. Learn how the Parleys team was able to get better visibility into potential performance hotspots in their web applications from monitoring their GlassFish application servers and associated JVM processes resulting in better user responsiveness on the Parleys.com website. Tom Lubinski, the Founder and CTO of SL, discussed how RTView helps application support and operation teams uncover bottlenecks and performance issues reducing their overall support costs and resources to maintain operations. An overview of the product architecture, solution offerings and use cases was discussed.

So we've done APM. Now what?

SL Corporation

When APM came to the forefront five or so years ago, we all thought we’d finally found the answer to our visibility challenges. Almost every organization implemented some form of APM. The truth is these solutions, for the most part, delivered. APM today is doing exactly what it’s supposed to be doing. But it is still not enough. APM has fallen short in two separate areas. One is not addressing the multitude of data – in addition to the metrics gathered by APM solutions – that must be analyzed to determine application health. The second is the failure to predict the global shift from an ITIL-based IT Ops strategy to a DevOps/Application Support structure; from silos of information to a merged architecture where everyone has access to the data and views they need. APM is now just a piece of an end-to-end visibility and control solution. In this webinar, Rodney Morrison, SL's VP of Products, discussed the disillusionment of APM, and did a walk-through of several use cases of companies who are leading the way to the new era of end-to-end visibility and control of their critical applications and infrastructure. Learn how these companies are able to: • See only the events that matter to them with enough context to show why they matter • Provide access to end-to-end, time-correlated monitoring metrics for faster troubleshooting • Enable custom, real-time holistic views of application configuration, dependencies and data flows for more intuitive understanding of application performance • Automate manual processes such health checks and stop and start scripts to work faster and reduce errors

Bogdan Mircea Tomescu Presentation

Mircea Tomescu

This document profiles Bogdan Mircea Tomescu, a control and instrument engineer with over 12 years of experience in the oil and gas industry. He has expertise in design, factory acceptance testing, commissioning, project management, and maintenance. Tomescu has worked on numerous offshore and onshore projects around the world and is proficient in several control systems and software tools. He is skilled in training, design, commissioning, and project engineering roles.

3983 cics java real life projects

nick_garrod

TIBCO RTView and Monitoring the Enterprise

SL Corporation

Seminar acoustic engineering marineindustries

Deniz Yazgaç

This document discusses acoustic engineering simulation for the marine industries using Siemens PLM software. It begins with an introduction to STS, Siemens' simulation and test solutions business, and its experience in industries like shipbuilding. The rest of the document covers the vibro-acoustic simulation process, including the source-transfer-receiver model, finite element method, boundary element method, and how element size relates to maximum simulation frequency. It provides examples of applying acoustic simulation to problems in ship design like hull radiation, acoustic signatures, propeller noise, and sonar arrays.

Visual Detection Technology in Siemens Gamesa (by Allan Moeller Larsen)

TUS Expo

1) The document discusses Siemens Gamesa's use of visual detection technology like drones and computer vision to inspect wind turbine blades. 2) It outlines Siemens Gamesa's current capabilities for drone inspections, as well as their expectations for drone inspection suppliers to improve technologies. 3) The presentation calls for industry standards around issues like failure mode catalogues, data interchange formats, and image quality metrics to help the technology mature and ensure quality.

Wellstream Processing sales presentation

Ingjerd Jensen

CapellaDays2022 | NavalGroup | Closing the gap between traditional engineerin...

Obeo

Closing the gap between traditional engineering and digital-native model-based driven engineering requires helping engineers to embrace new techniques. Naval Group decided to tackle the following issues: lack of interoperability with other systems, lack of bridge between functional definitions in PID schemas and MBSE physical layers, lack of documenting cross-layers relationships for a specific object's type.

TIBCO RTView and Monitoring the Enterprise

SL Corporation

SL’s Mark Bloomberg and Gopi Parimi provided an overview and demonstrated RTView for TIBCO Business Works Monitor in a 30-minute demonstration. The presentation included a demonstration of the RTView for TIBCO BusinessWorks Monitor and a discussion regarding current and upcoming product enhancements. The RTView for TIBCO BW monitor provides centralized real-time and historical performance metrics across all your BW servers, engines, processes and activities to better understand the health-state of your BW processes.

Viewers also liked

SUC Brasil 2012 : Coupled Dynamic Analysis FPSO / Mooring / Risers

João Henrique Volpini Mattos

Suc Brasil 2012 : Sesam for SURF

João Henrique Volpini Mattos

Capítulo 3 dados e sinais (1º unidade)

Faculdade Mater Christi

SUC Brasil 2012 : Optimization of a Floating Platforms Mooring System Based o...

João Henrique Volpini Mattos

Análise de Carregamento Hidrodinâmico em Estruturas Flutuantes - Parte I A Ex...

João Henrique Volpini Mattos

SUC Brazil 2012 : Analysis of Equipment Foundations of a Laydeck Barge

João Henrique Volpini Mattos

Análise de Carregamento Hidrodinâmico Em Estruturas Flutuantes - Parte II A R...

João Henrique Volpini Mattos

SUC Brasil 2012 : Engineering Study for Barge Lifting Weight on Crane Barge O...

João Henrique Volpini Mattos

Viewers also liked (8)

SUC Brasil 2012 : Coupled Dynamic Analysis FPSO / Mooring / Risers

Suc Brasil 2012 : Sesam for SURF

Capítulo 3 dados e sinais (1º unidade)

SUC Brasil 2012 : Optimization of a Floating Platforms Mooring System Based o...

Análise de Carregamento Hidrodinâmico em Estruturas Flutuantes - Parte I A Ex...

SUC Brazil 2012 : Analysis of Equipment Foundations of a Laydeck Barge

Análise de Carregamento Hidrodinâmico Em Estruturas Flutuantes - Parte II A R...

SUC Brasil 2012 : Engineering Study for Barge Lifting Weight on Crane Barge O...

Similar to SUC Brasil 2012 : Sima for Marine Operations

Global samhandling i Aker Solutions

Avanade Norway

Coherence monitoring 101

SL Corporation

DEEP SEA MINERAL EXTRACTION’S TECHNOLOGY APPROACH: A SUPPLIES PERSPECTIVE

iQHub

Software for survey and engineering at sea

Hydrographic Society Benelux

Monitoring of Web Applications and GlassFish for Performance and Availability...

SL Corporation

So we've done APM. Now what?

SL Corporation

Bogdan Mircea Tomescu Presentation

Mircea Tomescu

3983 cics java real life projects

nick_garrod

TIBCO RTView and Monitoring the Enterprise

SL Corporation

Seminar acoustic engineering marineindustries

Deniz Yazgaç

Visual Detection Technology in Siemens Gamesa (by Allan Moeller Larsen)

TUS Expo

Wellstream Processing sales presentation

Ingjerd Jensen

CapellaDays2022 | NavalGroup | Closing the gap between traditional engineerin...

Obeo

TIBCO RTView and Monitoring the Enterprise

SL Corporation

MOC Presentation

Capt. O.M.Bugge

Marine Offshore Consultants provides marine survey, consultancy, and training services. It is a sole proprietorship registered in Norway and located in Aalesund. The sole proprietor, Capt. O.M. Bugge, has over 40 years of offshore oil and gas experience working worldwide as a marine surveyor and consultant. Marine Offshore Consultants works with associate company Maritime Associates Pte Ltd, which provides naval architecture, offshore engineering, and vessel management software services.

Craig Sheridan International Industry-Academia Workshop on Cloud Reliability ...

Craig Sheridan

ES-SEnCE Services

ES-SEnCE

ES-SEnCE offers the supply of custom designed process vessels, skid mounted process equipment, pilot plants, and specialized proprietary equipment. They provide overall project management, engineering, procurement, inspection and testing, assembly, supply to site, and related site construction management and contracting. ES-SEnCE has multi-disciplinary skills in project management, engineering, equipment manufacturing, and contracting as well as extensive industrial and international project experience and a proven track record of successful project implementation.

Fem consultants, computational fluid dynamics

Simfwd

What's New in RTView Core 6.5

SL Corporation

As announced on January 14th, 2015, RTView® Core™ 6.5 Improves Performance and Flexibility with Additional HTML5 Enhancements. This webinar reviews some of the new features: • RTView graphical objects, including rectangle, circle, checkbox, and label objects, have been enhanced to allow them to be rendered as HTML elements in a Web thin-client deployment. • Status History graph now supports a new property to limit size of label area, mouseover text returns and custom definition of a Right/Double-click context menu. • TIBCO Hawk Data source includes a new column to obtain the amount of time, in milliseconds, that a subscription data process took

Factory of SimAssets

Marketing Simware

Simware is a platform that allows organizations to develop reusable simulation assets using open interfaces. It transforms simulation models into real assets that can be deployed independently on dedicated servers. This provides simulation capabilities as services using standards. The Simware platform leverages a model-driven development tool to create platform independent assets in Simulink and Stateflow that can then be deployed using different standards like DDS, HLA, and the new SISO LSA standard. This allows organizations to create simulation assets once and deploy them in various simulation applications and environments like virtual prototyping, live-virtual-constructive simulation, and virtual trainers.

Similar to SUC Brasil 2012 : Sima for Marine Operations (20)

Global samhandling i Aker Solutions

Coherence monitoring 101

DEEP SEA MINERAL EXTRACTION’S TECHNOLOGY APPROACH: A SUPPLIES PERSPECTIVE

Software for survey and engineering at sea

Monitoring of Web Applications and GlassFish for Performance and Availability...

So we've done APM. Now what?

Bogdan Mircea Tomescu Presentation

3983 cics java real life projects

TIBCO RTView and Monitoring the Enterprise

Seminar acoustic engineering marineindustries

Visual Detection Technology in Siemens Gamesa (by Allan Moeller Larsen)

Wellstream Processing sales presentation

CapellaDays2022 | NavalGroup | Closing the gap between traditional engineerin...

TIBCO RTView and Monitoring the Enterprise

MOC Presentation

Craig Sheridan International Industry-Academia Workshop on Cloud Reliability ...

ES-SEnCE Services

Fem consultants, computational fluid dynamics

What's New in RTView Core 6.5

Factory of SimAssets

More from João Henrique Volpini Mattos

Hydrostatics and stability

João Henrique Volpini Mattos

This document describes hydrostatic and stability calculation programs contained in Volume 3. It provides details on: 1) Hydrostatic tables for even keel and trim, intact stability calculations including criteria evaluation, floodable length curves, launching calculations, tonnage calculation, and Bonj-Jean data. 2) The data sheets used to define the calculations and output formatting. 3) Options for calculating hydrostatic data and stability for different draft, trim, and heel positions to ensure accurate results.

SUC Brasil 2012 : Coupled Analysis of Hose Loadings in a Tandem Offloading Op...

João Henrique Volpini Mattos

The document describes a coupled analysis of hose loadings during an offloading operation between a 269m FPSO and 269m DP-Shuttle Tanker connected by a 129.8m offloading hose. The analysis models the vessel motions using SIMO and hose loads using RIFLEX in a coupled simulation under environmental conditions of current, waves, and wind. The modeling process involves importing vessel models into SIMO, setting up the coupled RIFLEX analysis, defining the environment, importing the hose properties, connecting the vessels and hose, and specifying calculation parameters.

Apresentação Conjunta DNV-DNVS

João Henrique Volpini Mattos

Shaft Alignment and Whirling Vibration

João Henrique Volpini Mattos

Shaft Lateral Analysis Overview

João Henrique Volpini Mattos

The document provides an overview of shaft lateral analysis. It discusses: 1) Performing shaft alignment calculations and positioning bearings to fulfill loading criteria. 2) Modeling the shaft system accounting for loads and thermal expansion. 3) Analyzing shaft deflection, stresses, and ensuring adequate lubrication film thickness. 4) Verifying bearing loads are within criteria and seals/components are compatible. 5) Describing bearing positioning using the reliable GAP/SAG method within tolerances.

Sesam : Ferramentas de Análise de Pipelines e Flowlines

João Henrique Volpini Mattos

Umbilicals Design with UmbiliCAD and Helica

João Henrique Volpini Mattos

This document discusses software tools for umbilical design, analysis, and modeling. UmbiliCAD is introduced as a cross-section design tool that allows early analysis of umbilical properties. Helica is then presented as a stress analysis tool that can be used with UmbiliCAD for more advanced analysis, including load sharing, stiffness properties, fatigue analysis, and bending behavior accounting for friction. The document demonstrates how UmbiliCAD and Helica can be used together for a bundled umbilical design workflow, from cross-section design to local and global analysis.

MIMOSA - Análise de Sistemas de Ancoragem

João Henrique Volpini Mattos

Apresentação Sesam Estruturas Fixas

João Henrique Volpini Mattos

Structural Design of Drill Ships

João Henrique Volpini Mattos

Apresentação Sesam para Estruturas Flutuantes

João Henrique Volpini Mattos

1) O documento descreve o sistema Sesam, um sistema integrado de análise estrutural e hidrodinâmica para estruturas flutuantes desenvolvido pela DNV ao longo de 42 anos. 2) O Sesam oferece ferramentas para todo o processo de engenharia, desde a modelagem até a análise de fadiga estocástica, e é utilizado globalmente para projetos offshore. 3) O sistema integra análises hidrostática, hidrodinâmica e estrutural utilizando um mesmo modelo conceitual, permit

SuSi : Survey Simulator

João Henrique Volpini Mattos

O documento discute o desafio de educar as futuras gerações de profissionais da indústria naval e offshore em um cenário de rápida evolução tecnológica. A solução proposta é o uso de simuladores de realidade virtual, como o DNV Survey Simulator (SuSi), para treinar inspetores em vistorias de embarcações de forma segura e prática. O SuSi oferece modelos detalhados de diferentes tipos de embarcações e ferramentas para realizar inspeções virtuais.

Nauticus Project - A Management Tool for Shipbuilding

João Henrique Volpini Mattos

The document discusses the Nauticus Project, a management tool for shipbuilding projects. It focuses on breaking projects down into deliverables to make them easier to manage. This allows tracking progress through concrete milestones. It also describes how the tool could standardize construction surveys, improve process efficiency, simplify approvals, track vendors, and ensure compliance through a real-time online system. This would help various stakeholders like owners, shipyards, designers and charterers to collaborate throughout the shipbuilding process.

Migrating from Other CAE Systems to Sesam

João Henrique Volpini Mattos

The document discusses the benefits of migrating structural analysis models from other systems to the Sesam software. Sesam allows importing models from programs like Sacs, StruCad3D, and StaadPro. It enables analyzing structures across their entire lifecycle from design to removal. Key benefits include using a single model for all analysis stages, from linear analysis to non-linear collapse simulations. Sesam also facilitates code checking, fatigue analysis, and model verification.

How to Import a Sacs Model into GeniE

João Henrique Volpini Mattos

This document discusses importing a structural model from the Sacs software into the GeniE software. It describes how the import process automatically brings in the structure, wave loads, and load combinations. It also notes what may need manual modification after import and how to verify the imported GeniE model matches the original Sacs model. The purposes of the imported model in GeniE include performing linear analyses, evaluating results, and using the model over the entire lifecycle of the structure.

Sesam for Collapse Analysis

João Henrique Volpini Mattos

Sesam is software for structural analysis of offshore structures over their entire lifecycle. It can be used for collapse analysis, requalification of existing models, and modifications. Non-linear analysis in Sesam allows for modeling accidents, fires, explosions, and other extreme conditions. The software suite includes packages for coupled response analysis, offshore structure design, and hydrodynamic analysis. Models can be imported and shared between the different analysis packages.

Sesam Capabilities for Transportation & Installation Analysis

João Henrique Volpini Mattos

Sesam is software for transportation and installation analysis of offshore structures. It performs linear and non-linear analysis to evaluate deflections, stresses, code checking, and fatigue during transportation, lifting, launching, and installation. The software suite includes modules for coupled response analysis, offshore structure design, and hydrodynamic analysis. Sesam can model all stages of marine operations to safely transport, install, and qualify offshore structures.

SIMO : Simulação de Operações Marítimas

João Henrique Volpini Mattos

FPSO Requirements

João Henrique Volpini Mattos

1) Det Norske Veritas (DNV) is a classification society established in 1864 that identifies, assesses, and manages risk, particularly for maritime industries. 2) DNV has a large global presence with over 9,000 employees in 300 offices across 100 countries. 3) DNV has the largest market share for classification of floating production storage and offloading (FPSO) vessels at 40%, focusing on risk assessment and certification of new FPSO builds and conversions.

Apresentação HydroD : Análise Hidrostática e Hidrodinâmica de Estruturas Flut...

João Henrique Volpini Mattos

More from João Henrique Volpini Mattos (20)

Hydrostatics and stability

SUC Brasil 2012 : Coupled Analysis of Hose Loadings in a Tandem Offloading Op...

Apresentação Conjunta DNV-DNVS

Shaft Alignment and Whirling Vibration

Shaft Lateral Analysis Overview

Sesam : Ferramentas de Análise de Pipelines e Flowlines

Umbilicals Design with UmbiliCAD and Helica

MIMOSA - Análise de Sistemas de Ancoragem

Apresentação Sesam Estruturas Fixas

Structural Design of Drill Ships

Apresentação Sesam para Estruturas Flutuantes

SuSi : Survey Simulator

Nauticus Project - A Management Tool for Shipbuilding

Migrating from Other CAE Systems to Sesam

How to Import a Sacs Model into GeniE

Sesam for Collapse Analysis

Sesam Capabilities for Transportation & Installation Analysis

SIMO : Simulação de Operações Marítimas

FPSO Requirements

Apresentação HydroD : Análise Hidrostática e Hidrodinâmica de Estruturas Flut...

Recently uploaded

Full-RAG: A modern architecture for hyper-personalization

Zilliz

Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.

June Patch Tuesday

Ivanti

Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.

UiPath Test Automation using UiPath Test Suite series, part 6

DianaGray10

Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI. UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities. Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes. What will you get from this session? 1. Insights into integrating generative AI. 2. Understanding how this integration enhances test automation within the UiPath platform 3. Practical demonstrations 4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath Topics covered: What is generative AI Test Automation with generative AI and Open AI. UiPath integration with generative AI Speaker: Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP

Presentation of the OECD Artificial Intelligence Review of Germany

innovationoecd

Generating privacy-protected synthetic data using Secludy and Milvus

Zilliz

During this demo, the founders of Secludy will demonstrate how their system utilizes Milvus to store and manipulate embeddings for generating privacy-protected synthetic data. Their approach not only maintains the confidentiality of the original data but also enhances the utility and scalability of LLMs under privacy constraints. Attendees, including machine learning engineers, data scientists, and data managers, will witness first-hand how Secludy's integration with Milvus empowers organizations to harness the power of LLMs securely and efficiently.

UI5 Controls simplified - UI5con2024 presentation

Wouter Lemaire

Columbus Data & Analytics Wednesdays - June 2024

Jason Packer

Monitoring and Managing Anomaly Detection on OpenShift.pdf

Tosin Akinosho

Monitoring and Managing Anomaly Detection on OpenShift Overview Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices. Key Topics Covered 1. Introduction to Anomaly Detection - Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems. 2. Understanding Edge (IoT) - Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source. 3. What is ArgoCD? - Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices. 4. Deployment Using ArgoCD for Edge Devices - Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD. 5. Introduction to Apache Kafka and S3 - Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions. 6. Viewing Kafka Messages in the Data Lake - Learn how to view and analyze Kafka messages stored in a data lake for better insights. 7. What is Prometheus? - Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices. 8. Monitoring Application Metrics with Prometheus - Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system. 9. What is Camel K? - Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes. 10. Configuring Camel K Integrations for Data Pipelines - Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow. 11. What is a Jupyter Notebook? - Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text. 12. Jupyter Notebooks with Code Examples - Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.

Removing Uninteresting Bytes in Software Fuzzing

Aftab Hussain

Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process. In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds. - These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.

Artificial Intelligence for XMLDevelopment

Octavian Nadolu

In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject. We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup. Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved. The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring. The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise. By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.

“I’m still / I’m still / Chaining from the Block”

Claudio Di Ciccio

TrustArc Webinar - 2024 Global Privacy Survey

TrustArc

How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024? In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores. See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe. This webinar will review: - The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey - The top challenges for privacy leaders, practitioners, and organizations in 2024 - Key themes to consider in developing and maintaining your privacy program

“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...

Edge AI and Vision Alliance

For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/ Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit. In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing. van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.

HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU

panagenda

Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/ DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen! Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell. Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten. Diese Themen werden behandelt - Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten - Wie funktionieren CCB- und CCX-Lizenzen wirklich? - Verstehen des DLAU-Tools und wie man es am besten nutzt - Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw. - Praxisbeispiele und Best Practices zum sofortigen Umsetzen

Mind map of terminologies used in context of Generative AI

Kumud Singh

Things to Consider When Choosing a Website Developer for your Website | FODUU

FODUU

Mariano G Tinti - Decoding SpaceX

Mariano Tinti

Microsoft - Power Platform_G.Aspiotis.pdf

Uni Systems S.M.S.A.

みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...

名前です男

Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack

shyamraj55

Recently uploaded (20)

Full-RAG: A modern architecture for hyper-personalization

June Patch Tuesday

UiPath Test Automation using UiPath Test Suite series, part 6

Presentation of the OECD Artificial Intelligence Review of Germany

Generating privacy-protected synthetic data using Secludy and Milvus

UI5 Controls simplified - UI5con2024 presentation

Columbus Data & Analytics Wednesdays - June 2024

Monitoring and Managing Anomaly Detection on OpenShift.pdf

Removing Uninteresting Bytes in Software Fuzzing

Artificial Intelligence for XMLDevelopment

“I’m still / I’m still / Chaining from the Block”

TrustArc Webinar - 2024 Global Privacy Survey

“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...

HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU

Mind map of terminologies used in context of Generative AI

Things to Consider When Choosing a Website Developer for your Website | FODUU

Mariano G Tinti - Decoding SpaceX

Microsoft - Power Platform_G.Aspiotis.pdf

Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack

SUC Brasil 2012 : Sima for Marine Operations

1. SesamTM 40 years of success Introducing Sima for marine operations Fan Joe Zhang & Ole Jan Nekstad 5 November 2012

2. Background & motivation for developing Sima – a new graphical front end for Simo and Riflex for marine operations Sima for marine operations 5 November 2012 © Det Norske Veritas AS. All rights reserved. 2

3. Background In 2001 Norsk Hydro replaced flexible risers at Njord - Norsk Hydro has merged with Statoil Damages occurred in adjacent risers during replacement Development of a simulator for familiarization and training initiated Sima for marine operations 5 November 2012 © Det Norske Veritas AS. All rights reserved. 3

4. Motivation Simulating boarding Engineering - Quality assurance - Feasibility evaluation - Distinguish the really challenging tasks from the seemingly challenging tasks Preparation for the actual operation - Improve HSE performance Simulating pipelaying - Familiarization - Cross – disciplinary communication Decision support during actual operation: - Online monitoring - Visibility - What – if – analysis Sima for marine operations 5 November 2012 © Det Norske Veritas AS. All rights reserved. 4

5. Sima and DeepC Sima – marine operations where DeepC – mooring and riser Simo and Riflex is used analysis where Simo and Riflex is used – includes code checking and fatigue of risers Sima for marine operations 5 November 2012 © Det Norske Veritas AS. All rights reserved. 5

7. What is Sima A complete tool for simulation of marine operations, from modelling to results Build upon “state of the art” software for dynamic analysis Graphical user interface makes modelling fast and easy Developed together with Marintek and Ceetron Exclusively marketed and sold by DNV Software Sima for marine operations 5 November 2012 © Det Norske Veritas AS. All rights reserved. 7

8. Extensively tested prior to release Under the supervision of - Functionality testing - Usability - 2011 – 2012 Will be released Q4/2012 Sima for marine operations 5 November 2012 © Det Norske Veritas AS. All rights reserved. 8

9. Functionality Modelling - Graphical user interface Analysis - Time domain - Interactivity Result presentation - Integrated post processor - 3D visualisation - Seabed/ infrastructure integration Sima for marine operations 5 November 2012 © Det Norske Veritas AS. All rights reserved. 9

SUC Brasil 2012 : Sima for Marine Operations

Recommended

Recommended

More Related Content

Viewers also liked

Viewers also liked (8)

Similar to SUC Brasil 2012 : Sima for Marine Operations

Similar to SUC Brasil 2012 : Sima for Marine Operations (20)

More from João Henrique Volpini Mattos

More from João Henrique Volpini Mattos (20)

Recently uploaded

Recently uploaded (20)

SUC Brasil 2012 : Sima for Marine Operations