Steve Isaac has over 20 years of experience in MRO and aerospace manufacturing. He currently works as Quality Assurance Manager for a plastics company that supplies aircraft components, where he helped them achieve EASA Part 145 and AS9100 certification. Isaac has extensive qualifications in quality auditing and aerospace standards including being an EASA Form 4 holder, AS9100 and ISO 9001 lead auditor, and Six Sigma Green Belt.
PECB Webinar: Understanding the basics of laboratory management with ISO/IEC ...PECB
We will cover:
• Components and implementation of Laboratory Management System based on ISO 17025
• Principal process of Laboratory management system
• Quality, administrative and technical systems/requirements that govern the operations of a laboratory
Presenter:
This webinar will be presented by Dotun Bolade. He is a Certified PECB ISO/IEC 17025 Lead Assessor and Trainer.
PECB Webinar: Understanding the basics of laboratory management with ISO/IEC ...PECB
We will cover:
• Components and implementation of Laboratory Management System based on ISO 17025
• Principal process of Laboratory management system
• Quality, administrative and technical systems/requirements that govern the operations of a laboratory
Presenter:
This webinar will be presented by Dotun Bolade. He is a Certified PECB ISO/IEC 17025 Lead Assessor and Trainer.
ISO 17025 certification gives testing and calibration laboratories the same type of accreditation that ISO 9001 gives to manufacturing and service organizations. Learn more at http://www.CEBOS.com
This presentation is about ISO 17021:2015 Documentation kit which is required for accreditation of certifying body. It talked about ISO 17021 Documentation in details. This ISO 17021 Documentation kit having sample documents required for ISO 17021:2015 certification.
The ISO 17025 standard: principles and management requirements
Workshop on laboratory basics and fundamentals of ISO Quality Management Standards
March 21-22, 2018, Kyiv, Ukraine
Global Manager Group provides ISO/IEC 17025 training presentation to learn requirements of revised ISO/IEC 17025 standard which helps in ISO/IEC 17025:2017 accreditation and to establish good system in laboratories.
ISO 17020, entitled "General Criteria for the Operation of Various Types of Bodies Performing Inspection", is an internationally recognized standard for the competence of inspection bodies. ISO 17020 should not be confused with ISO 9001, which is specific to quality management systems. ISO 9001 does not require evaluation of the technical competence of an inspection body and it should not be regarded as an 'acceptable' alternative to ISO 17020.
ISO 17025 certification gives testing and calibration laboratories the same type of accreditation that ISO 9001 gives to manufacturing and service organizations. Learn more at http://www.CEBOS.com
This presentation is about ISO 17021:2015 Documentation kit which is required for accreditation of certifying body. It talked about ISO 17021 Documentation in details. This ISO 17021 Documentation kit having sample documents required for ISO 17021:2015 certification.
The ISO 17025 standard: principles and management requirements
Workshop on laboratory basics and fundamentals of ISO Quality Management Standards
March 21-22, 2018, Kyiv, Ukraine
Global Manager Group provides ISO/IEC 17025 training presentation to learn requirements of revised ISO/IEC 17025 standard which helps in ISO/IEC 17025:2017 accreditation and to establish good system in laboratories.
ISO 17020, entitled "General Criteria for the Operation of Various Types of Bodies Performing Inspection", is an internationally recognized standard for the competence of inspection bodies. ISO 17020 should not be confused with ISO 9001, which is specific to quality management systems. ISO 9001 does not require evaluation of the technical competence of an inspection body and it should not be regarded as an 'acceptable' alternative to ISO 17020.
1. Steve Isaac
15 Birchwood Close
Booker
High Wycombe
Bucks
HP12 4QH
Tel Mob 07470 475223
Email: steve526isaac@yahoo.co.uk
Profile
Currently working as a Quality Assurance Manager for a Plastics Manufacturing
company supplying various Aircraft components to leading manufacturers. Instrumental
for acquiring both EASA Part 145 & AS9100 rev C status for my current company.
I bring to the table over 20 years experience in MRO and supply which has enabled me
to gain a comprehensive knowledge of aerospace techniques, processes & procedures.
Area of Expertise.
• CAA Form 4 Holder.for 21G and EASA 145
• AS9100 Rev C & ISO 9001.2008
• Six Sigma Green Belt
• Writing Procedures
• MOE writing
•
• Workshop Supervisor/Facility Manager
• Qualified EASA Internal Quality Auditor
• AS9110 Qualified Internal Auditor
• IRCA/QMS qualified Internal Quality Auditor 9 yrs
• Thorough knowledge of restraining devices
• Dangerous Good Signatory By Air
• Dangerous Goods Signatory by Road
• Qualified Hydro-Static Tester
• High Pressure Bottles
• Fire Extinguishers
• Oxygen Masks
• Oxygen Bottles
• Restraint Safety Systems
2. • Company Signatory on all company products
• Trained a satellite repair station for Restraint Systems in 4 days! in Australia 2010
• Dealing with customer queries and supporting sites in Germany, USA .
Qualifications.
EASA Part 21 Subpart G, POA Essentials,2015(Baines Simmons)
AS9110 Internal Auditor (BSI)
Application of SMS Safety Management Systems (Baines & Simmons)
EASA Part 145 - Successfully Applying the Regulation (Baines & Simmons)
Quality Auditing & Implementation for BSI AS9100 Rev C Audit
Practical Skills for New Quality Auditors (Baines & Simmons) (September 2011)
IRCA Accredited Internal QMS Auditor Course (PERA Training) (May 2010)
Human Factors Training (BlueTuna) (December 2010)
IRCA Accredited Internal QMS Auditor Course (PERA Training) (February 2007)
Certifying Staff Continuation Training (Baines & Simmons) (May 2004)
HNC Mechanical Engineering
ONC Mechanical Engineering
5 ‘O’Levels
• Maths
• English
• Physics
• Engineering Drawing
• Metalwork
Current Employment
Balform Ltd
Wooburn Green
High Wycombe Bucks
HP10 0PE
Quality Assurance Manager running of the Quality System and associated
procedures.
EASA PART 21G. AS9100 Rev C & ISO9001 Facility Manufacturing parts for the
Aircraft industry.
EASA 145 Accreditation writing MOE and associated procedures ensuring they
meet current regulations.
3. Internal Audits & External Audits of suppliers and Sub-Contractors.
First Article Inspections and associated documentation.
Ensuring Quality levels are maintained and exceeded by continual improvement
Green Belt Six Sigma,
Previous Employment Oct 1993 to June 2015
Meggitt(uk) Aviation Services, formerly Pacific Scientific
Howarth Road
Maidenhead,
Berkshire, SL6 1AP
Responsibilities Included
Interim Quality Representative deputising for the QM (24 months).
All internal Product & Procedural Audits within the 145 Organisation. Approx 50
including EASA 145 and internal FAA Audits. External Audits on suppliers.
Experienced in CAA/FAA & BSI Audits and implementation of any corrective
actions which may arise.
Updating the MOE as required, introducing new Internal Procedures as required.
Updating and maintaining Technical Library and Capability listing.
Maintaining the Calibration System. Dealing with customers on product support issues
and supplying corrective actions as required.
Oct 1988 – April 1993 Hurco Europe Ltd. High Wycombe
CNC Machine Tool Fitter, Electrical Discharge Machine Fitter
Responsible for building machines from kit form.
Research and development of EDM and prototype build.
Aug 1986 – Oct 1988 Chelton Electrostatics, Marlow, Bucks
Manufacture Aircraft Aerials and Associated Systems.
Test and Repair Aircraft Antennae
Sept 1982 – Aug 1986 Anderson Strathclyde PLC, Saunderton, Bucks
4 year Mechanical Engineering Apprenticeship
Milling, Turning, Grinding, Bench Fitting.
John Hampden Grammar School Left June 1982.