STEEL.pdf
•
0 likes•2 views
"Leomi’s insertion thermal mass flow meter (mass flow meter) is used in steel foundries for measuring gases that help in steel production processes."
Report
Share
Report
Share
Download to read offline
Recommended
IRJET- Design & Experimental Investigation of Flue Gas and Combustion Control...
This document describes the design and experimental investigation of a flue gas and combustion control system for a single pass evaporator used to generate steam from multiple solid fuels. It discusses the combustion process, modeling of system components like exhaust gas chambers and an air inlet nozzle, and fabrication of the combustion chamber and other parts. The goal is to increase combustion efficiency, reduce fuel consumption and harmful emissions through an advanced combustion control system.
Process Fans in Iron and Steel Industry
Steel in industries is manufactured in two ways, traditionally by using raw materials like iron ore, coal and limestone in blast furnace or by recycling the material using electric arc furnaces.
The opportunities for reducing CO2 emissions in the iron and steel industry -...
The opportunities for reducing CO2 emissions in the iron and steel industry -...UK Carbon Capture and Storage Research Centre
The opportunities for reducing CO2 emissions in the iron and steel industry - plenary presentation given by Dianne Wiley at the UKCCSRC Cardiff Biannual Meeting, 10-11 September 2014arvind corrtech pdf.pdf
Arvind Corrotech Ltd is a leading hot-dip galvanizing plant manufacturers and chemical storage tanks supplier company in Ahmedabad.
Mr.A.C.R.Das-Ministry-of-Steel.ppt
This document discusses the status and future projections of the Indian steel industry. It notes that Indian steel production is expected to grow significantly in the coming years to support infrastructure development and economic growth. Currently, India ranks 4th in the world for steel production. The steel industry is fragmented with many small plants using different production processes. The document outlines strategies for the steel industry to improve energy efficiency and reduce emissions, such as adopting new technologies, increasing use of alternate fuels, and pursuing R&D for low-carbon production methods. This will help transform the industry to meet international benchmarks over the long term.
A VOCATIONAL TRAINNING REPORT_aman
The document provides information about Bhilai Steel Plant located in Bhilai, India. It is India's first and main producer of steel rails. The plant produces steel rails up to 260 meters long, as well as wide steel plates and other steel products. It also produces and sells chemical by-products from its coke ovens and coal chemical plant. The plant was established in 1955 with assistance from the Soviet Union. It is the largest and most profitable facility of Steel Authority of India Limited.
Industrial visit to BHEL, Ranipet
The document summarizes an industrial visit by students to Bharat Heavy Electricals Limited (BHEL) Boiler Auxiliaries Plant in Ranipet. The plant manufactures boiler components like electrostatic precipitators, air pre-heaters, fans, and more. During the visit, a deputy engineer gave the students a tour of the plant and explained the manufacturing processes. The plant has various departments like marketing, engineering, production, and uses machinery like lathes and mills to produce high-quality, state-of-the-art boiler components for major customers like NTPC and state electricity boards. The visit provided the students insight into the manufacturing operations of a large plant.
An Introduction to Steam Generators R1.pdf
This document provides an introduction to steam generators and their components. It discusses various boiler design considerations including construction types, available fuels, coal ash characteristics, and combustion technology selection. Key points include:
- Boilers can be shop assembled package units, field assembled modular units, or fully field erected units. The type selection depends on size, firing type, and life cycle costs.
- Available fuels include natural gas, fuel oils, coal, and various alternative fuels for atmospheric circulating fluidized bed boilers. Coal is classified based on its composition and heating value.
- Coal ash characteristics like fusion temperature influence slagging and fouling potential and must be considered in furnace design. Ash analysis is important for selection of
Recommended
IRJET- Design & Experimental Investigation of Flue Gas and Combustion Control...
This document describes the design and experimental investigation of a flue gas and combustion control system for a single pass evaporator used to generate steam from multiple solid fuels. It discusses the combustion process, modeling of system components like exhaust gas chambers and an air inlet nozzle, and fabrication of the combustion chamber and other parts. The goal is to increase combustion efficiency, reduce fuel consumption and harmful emissions through an advanced combustion control system.
Process Fans in Iron and Steel Industry
Steel in industries is manufactured in two ways, traditionally by using raw materials like iron ore, coal and limestone in blast furnace or by recycling the material using electric arc furnaces.
The opportunities for reducing CO2 emissions in the iron and steel industry -...
The opportunities for reducing CO2 emissions in the iron and steel industry -...UK Carbon Capture and Storage Research Centre
The opportunities for reducing CO2 emissions in the iron and steel industry - plenary presentation given by Dianne Wiley at the UKCCSRC Cardiff Biannual Meeting, 10-11 September 2014arvind corrtech pdf.pdf
Arvind Corrotech Ltd is a leading hot-dip galvanizing plant manufacturers and chemical storage tanks supplier company in Ahmedabad.
Mr.A.C.R.Das-Ministry-of-Steel.ppt
This document discusses the status and future projections of the Indian steel industry. It notes that Indian steel production is expected to grow significantly in the coming years to support infrastructure development and economic growth. Currently, India ranks 4th in the world for steel production. The steel industry is fragmented with many small plants using different production processes. The document outlines strategies for the steel industry to improve energy efficiency and reduce emissions, such as adopting new technologies, increasing use of alternate fuels, and pursuing R&D for low-carbon production methods. This will help transform the industry to meet international benchmarks over the long term.
A VOCATIONAL TRAINNING REPORT_aman
The document provides information about Bhilai Steel Plant located in Bhilai, India. It is India's first and main producer of steel rails. The plant produces steel rails up to 260 meters long, as well as wide steel plates and other steel products. It also produces and sells chemical by-products from its coke ovens and coal chemical plant. The plant was established in 1955 with assistance from the Soviet Union. It is the largest and most profitable facility of Steel Authority of India Limited.
Industrial visit to BHEL, Ranipet
The document summarizes an industrial visit by students to Bharat Heavy Electricals Limited (BHEL) Boiler Auxiliaries Plant in Ranipet. The plant manufactures boiler components like electrostatic precipitators, air pre-heaters, fans, and more. During the visit, a deputy engineer gave the students a tour of the plant and explained the manufacturing processes. The plant has various departments like marketing, engineering, production, and uses machinery like lathes and mills to produce high-quality, state-of-the-art boiler components for major customers like NTPC and state electricity boards. The visit provided the students insight into the manufacturing operations of a large plant.
An Introduction to Steam Generators R1.pdf
This document provides an introduction to steam generators and their components. It discusses various boiler design considerations including construction types, available fuels, coal ash characteristics, and combustion technology selection. Key points include:
- Boilers can be shop assembled package units, field assembled modular units, or fully field erected units. The type selection depends on size, firing type, and life cycle costs.
- Available fuels include natural gas, fuel oils, coal, and various alternative fuels for atmospheric circulating fluidized bed boilers. Coal is classified based on its composition and heating value.
- Coal ash characteristics like fusion temperature influence slagging and fouling potential and must be considered in furnace design. Ash analysis is important for selection of
CII Presentation
The document discusses the history and evolution of steel production technologies from ancient times to modern times. It notes that ancient steel was produced using charcoal in open hearth furnaces. In the 1850s, the Bessemer process allowed for inexpensive mass production of steel. Later, open hearth furnaces replaced the Bessemer process. Current technologies like basic oxygen furnaces and electric arc furnaces have replaced open hearth furnaces due to their faster production. Modern steelmaking is highly automated, energy intensive, and capital intensive but produces low-cost, high quality steel.
Furnace, fuels and fluxes
A presentation on furnaces, fuels, and fluxes in chemical metallurgy. Chemical Metallurgy is also known as extractive metallurgy or process metallurgy and it's concerned with all processes involved in the extraction of valuable metals from their ores. It has three main branches namely: hydrometallurgy, pyrometallurgy, and electrometallurgy. The use of furnaces is important in the area of pyrometallurgy to provide the necessary heat required to ensure the extraction of metals from their ores. Fuels are used to provide the adequate energy needed.
20150721 epd structural_tube_postverifica_02 (2) (1)
Tenaris produces seamless steel tubes for structural applications in offshore and onshore construction. Their tubes are used in jack-up rigs, vessels, and top side structures. The document provides details on Tenaris' steel production process, including melting scrap and pig iron, casting bars, and rolling tubes through various mills. It also describes heat treatments and quality controls performed.
Amit
The document summarizes information about Bokaro Steel Plant in Jharkhand, India. It details the plant's history, facilities, products, and steel manufacturing process. Bokaro Steel Plant was established in 1964 with Soviet assistance and currently produces 4.5 million tons of liquid steel annually. It houses five blast furnaces and facilities for coke production, sintering, steel melting, continuous casting, rolling, and producing finished steel products.
Types of Casting Furnaces, Inspection and cleaning of casting
This presentation includes
1.Types of castings Furnaces viz.crucible, Open hearth, electric arc, cupola.
2. Inspection methods of castings such as sound test, impact test, pressure test, radiography test, penetrant test, ultrasonic test, magnetic particle test etc.
3. Cleaning of casting: various methods such as removal of cores, gates, risers, unwanted metal projections, fins and nails.Surface cleaning etc.
IRJET- Fabrication of Foundry Cum Forging Furnace
This document describes the fabrication of a coal-fired crucible furnace using locally sourced materials. Mild steel sheet was used to fabricate the furnace casing and other components. Refractory bricks lined the inside and were mortared together. A burner housing introduced air from a blower to fuel combustion inside. Proper insulation and an exhaust system allowed the furnace to efficiently melt metals for casting or heat them for forging. The furnace was designed to operate without extensive electricity usage, making it suitable for small foundries.
Berr Process Equipment - 2018-001
BERR Industry provides process equipment design, manufacturing, and commissioning services. They have over 25 years of experience serving industries like oil and gas. Their services include engineering, 3D modeling, manufacturing of items like heat exchangers, cooling towers, filters, and general process equipment. BERR also has extensive workshop facilities for machining, repair, and new product manufacturing. They are a one-stop shop for parts manufacturing, rebuilding, and installation of machinery.
METAL MANUFACTURING AND FURNACES
Manufacturing is broadly described as the process in which materials are transformed into valuable substances. The process involves one or more processing and/or assembly procedure. The manufacturing process adds value to the material after a change in its properties.
Industrial Training Report on Blast Furnace
This document provides information about Shani Kumar Singh's 15-day industrial training report at the Blast Furnace 1 & 2 plant of Jindal Steel and Power Limited in Raigarh, India from March 25th to April 8th, 2017. It includes an acknowledgment, introduction on Jindal Steel and Power Limited, facilities at the Raigarh plant, an introduction and process of the blast furnace, and descriptions of major equipment like the stock house, blast furnace, stoves, slag granulation plant, gas cleaning plant, pulverized coal injection, and pig casting machine.
Iaetsd sinter coolers
The document discusses a waste heat recovery system for sinter coolers in steel plants. Sinter coolers produce large amounts of exhaust heat during the steel production process. The proposed system recovers sensible heat from the exhaust gases of sinter machines and coolers through heat recovery hoods. The captured heat is used to generate steam in a heat recovery boiler, which then generates electricity through a turbine and generator. Recovering waste heat in this way improves energy efficiency, reduces carbon emissions, and can help meet increasing global energy demands.
High Speed Infra Red Furnace
International Journal of Modern Engineering Research (IJMER) is Peer reviewed, online Journal. It serves as an international archival forum of scholarly research related to engineering and science education.
Epcon Industrial Systems
Epcon is One of the World's leading Manufacturing Companies. Epcon designs and manufactures thermal oxidizers, industrial ovens and furnaces, air pollution control systems, and specialty finishing systems for industry. Visit Us https://epconlp.com/
电站锅炉专页翻译
The document discusses different types of power plant boilers, including circulating fluidized bed (CFB) coal boilers, oil and gas boilers, biomass boilers, waste heat boilers, and ZG's breakthrough in CFB low nitrogen combustion technology. CFB boilers can reduce harmful gas emissions by 80-90% and effectively reduce atmospheric pollution from coal-fired power plants. Oil and gas boilers have high efficiency up to 92% and minimal environmental impact compared to coal boilers. Biomass boilers allow for profitable use of agricultural waste while reducing carbon emissions. Waste heat boilers utilize industrial waste for heating. ZG has optimized air flow and implemented flue gas recirculation and precise controls
Sponge Iron Plant.pdf
Zhengzhou Hengyang Industry Co., Ltd provides services related to rotary kiln systems for sponge iron production. They specialize in designing, manufacturing, installing, and providing operational support for rotary kilns and related equipment. The company offers training programs and innovative solutions to help plants reach their full potential. The document describes the raw material requirements, manufacturing process, and basic components involved in a typical coal-based rotary kiln system for producing sponge iron.
Tp cfb 13_01
This document discusses the benefits of circulating fluidized bed (CFB) technology compared to conventional solid fuel generation technologies. CFB technology offers improved efficiencies, reduced emissions, fuel flexibility, and lower costs. It can burn a wide variety of fuels without needing secondary emission controls. The document highlights a recent project in South Korea that will use CFB technology to power four 550 MW generators, the largest CFB units to date. The CFB units can meet stringent emission limits without additional flue gas desulfurization equipment.
Mass and heat balance for duplex stainless steel production by conarc process
Mass balance and heat balance calculations are carried out for estimating inflow and outflow of materials and energy respectively in a process. Such calculations are required to get accurate composition of product with available raw materials. CONARC is a new electric steel making process using a twin shell electric arc furnace (EAF) which can handle raw materials input of solid steel scrap and hot metal in varying proportions.
In the present study an attempt has been made to develop a mathematical model for mass and heat balance for duplex stainless steel production by CONARC process. Case studies have been carried out by varying the amount of hot metal in the charge from 0% to 100%. Such variation shows proportionate increase in the amount of oxygen required, lime consumption and amount of slag formed along with the increase in chemical energy available for the process. However, electrical energy consumption reduces for SAF 2205 and 3RE60 duplex stainless steel production.
On the basis of the above case studies, it has been found that increased amount of hot metal increases the available chemical energy for the process and in turn it reduces the electrical energy requirement of CONARC process, ultimately leading to reduction in the power consumption and overall production cost.
leomi - Insertion Thermal Mass Flow Meter manufacturer.pptx
We are offering high quality Insertion Thermal Mass Flow Meter in India. Our product is made up of high-quality material, which ensures its long life.
Electrric arc furnace
The slide mainly tells you the brief introduction of the electric arc furnace, and whose development history, classification, and advantages.
Furnaces part1
The document discusses heat treatment furnaces and processes. It begins by classifying furnaces and describing general fuel economy measures. It then defines heat treatment, discusses its purposes and principles. Several heat treatment processes are outlined, including annealing, normalizing, hardening and tempering. The document concludes by describing different types of furnaces used for heat treatment, such as batch and continuous furnaces, as well as furnaces powered by gas, oil or electricity.
Adoption of supercritical technology (1)
India has significant coal reserves and is looking to adopt supercritical steam technology to generate more power while improving efficiency and reducing emissions. Supercritical plants can achieve efficiencies of up to 15% higher than subcritical plants through higher steam temperatures and pressures. However, developing high temperature alloy steels is a key challenge. A study analyzed the costs and technical feasibility of importing supercritical technology from other countries versus developing it domestically. The study found domestic development could reduce costs by around 30-40% compared to imports but would require 2-6 years to transfer the technology depending on the complexity of the plant design.
LEOMI_BROCHURE_compressed (1)_compressed.pdf
LEOMI has developed ways to optimize your existing air & gas flow measurement systems. LEOMI has commissioned India’s first in-house latest State-of-the-art Wind Tunnel, Made in Germany for Air Velocity Calibration and anemometer calibration services. It is certified as per ISO-17025 and DAkkS Germany traceability for airflow velocity ranges from 0.2 m/s to 75 m/s with flow uniformity of ±0.2%.
High Temperature Thermal Mass Flow Meter
LEOMI is a manufacturing venture founded by experienced professionals with over two decades of expertise in technology and automation. Specializing in industrial measurement solutions, particularly Insertion Thermal Mass Flow Meters, LEOMI aims to enhance efficiency and optimize processes in rugged industrial conditions. With the support of MTS Engineers Pvt Ltd's expertise and a commitment to German standards from softflow.de, LEOMI offers affordable and reliable solutions. As an ISO 9001:2015 certified company, LEOMI prioritizes quality and customer satisfaction through effective quality management systems. Based in Gandhinagar, Gujarat, LEOMI is dedicated to meeting the diverse needs of its clients.
More Related Content
Similar to STEEL.pdf
CII Presentation
The document discusses the history and evolution of steel production technologies from ancient times to modern times. It notes that ancient steel was produced using charcoal in open hearth furnaces. In the 1850s, the Bessemer process allowed for inexpensive mass production of steel. Later, open hearth furnaces replaced the Bessemer process. Current technologies like basic oxygen furnaces and electric arc furnaces have replaced open hearth furnaces due to their faster production. Modern steelmaking is highly automated, energy intensive, and capital intensive but produces low-cost, high quality steel.
Furnace, fuels and fluxes
A presentation on furnaces, fuels, and fluxes in chemical metallurgy. Chemical Metallurgy is also known as extractive metallurgy or process metallurgy and it's concerned with all processes involved in the extraction of valuable metals from their ores. It has three main branches namely: hydrometallurgy, pyrometallurgy, and electrometallurgy. The use of furnaces is important in the area of pyrometallurgy to provide the necessary heat required to ensure the extraction of metals from their ores. Fuels are used to provide the adequate energy needed.
20150721 epd structural_tube_postverifica_02 (2) (1)
Tenaris produces seamless steel tubes for structural applications in offshore and onshore construction. Their tubes are used in jack-up rigs, vessels, and top side structures. The document provides details on Tenaris' steel production process, including melting scrap and pig iron, casting bars, and rolling tubes through various mills. It also describes heat treatments and quality controls performed.
Amit
The document summarizes information about Bokaro Steel Plant in Jharkhand, India. It details the plant's history, facilities, products, and steel manufacturing process. Bokaro Steel Plant was established in 1964 with Soviet assistance and currently produces 4.5 million tons of liquid steel annually. It houses five blast furnaces and facilities for coke production, sintering, steel melting, continuous casting, rolling, and producing finished steel products.
Types of Casting Furnaces, Inspection and cleaning of casting
This presentation includes
1.Types of castings Furnaces viz.crucible, Open hearth, electric arc, cupola.
2. Inspection methods of castings such as sound test, impact test, pressure test, radiography test, penetrant test, ultrasonic test, magnetic particle test etc.
3. Cleaning of casting: various methods such as removal of cores, gates, risers, unwanted metal projections, fins and nails.Surface cleaning etc.
IRJET- Fabrication of Foundry Cum Forging Furnace
This document describes the fabrication of a coal-fired crucible furnace using locally sourced materials. Mild steel sheet was used to fabricate the furnace casing and other components. Refractory bricks lined the inside and were mortared together. A burner housing introduced air from a blower to fuel combustion inside. Proper insulation and an exhaust system allowed the furnace to efficiently melt metals for casting or heat them for forging. The furnace was designed to operate without extensive electricity usage, making it suitable for small foundries.
Berr Process Equipment - 2018-001
BERR Industry provides process equipment design, manufacturing, and commissioning services. They have over 25 years of experience serving industries like oil and gas. Their services include engineering, 3D modeling, manufacturing of items like heat exchangers, cooling towers, filters, and general process equipment. BERR also has extensive workshop facilities for machining, repair, and new product manufacturing. They are a one-stop shop for parts manufacturing, rebuilding, and installation of machinery.
METAL MANUFACTURING AND FURNACES
Manufacturing is broadly described as the process in which materials are transformed into valuable substances. The process involves one or more processing and/or assembly procedure. The manufacturing process adds value to the material after a change in its properties.
Industrial Training Report on Blast Furnace
This document provides information about Shani Kumar Singh's 15-day industrial training report at the Blast Furnace 1 & 2 plant of Jindal Steel and Power Limited in Raigarh, India from March 25th to April 8th, 2017. It includes an acknowledgment, introduction on Jindal Steel and Power Limited, facilities at the Raigarh plant, an introduction and process of the blast furnace, and descriptions of major equipment like the stock house, blast furnace, stoves, slag granulation plant, gas cleaning plant, pulverized coal injection, and pig casting machine.
Iaetsd sinter coolers
The document discusses a waste heat recovery system for sinter coolers in steel plants. Sinter coolers produce large amounts of exhaust heat during the steel production process. The proposed system recovers sensible heat from the exhaust gases of sinter machines and coolers through heat recovery hoods. The captured heat is used to generate steam in a heat recovery boiler, which then generates electricity through a turbine and generator. Recovering waste heat in this way improves energy efficiency, reduces carbon emissions, and can help meet increasing global energy demands.
High Speed Infra Red Furnace
International Journal of Modern Engineering Research (IJMER) is Peer reviewed, online Journal. It serves as an international archival forum of scholarly research related to engineering and science education.
Epcon Industrial Systems
Epcon is One of the World's leading Manufacturing Companies. Epcon designs and manufactures thermal oxidizers, industrial ovens and furnaces, air pollution control systems, and specialty finishing systems for industry. Visit Us https://epconlp.com/
电站锅炉专页翻译
The document discusses different types of power plant boilers, including circulating fluidized bed (CFB) coal boilers, oil and gas boilers, biomass boilers, waste heat boilers, and ZG's breakthrough in CFB low nitrogen combustion technology. CFB boilers can reduce harmful gas emissions by 80-90% and effectively reduce atmospheric pollution from coal-fired power plants. Oil and gas boilers have high efficiency up to 92% and minimal environmental impact compared to coal boilers. Biomass boilers allow for profitable use of agricultural waste while reducing carbon emissions. Waste heat boilers utilize industrial waste for heating. ZG has optimized air flow and implemented flue gas recirculation and precise controls
Sponge Iron Plant.pdf
Zhengzhou Hengyang Industry Co., Ltd provides services related to rotary kiln systems for sponge iron production. They specialize in designing, manufacturing, installing, and providing operational support for rotary kilns and related equipment. The company offers training programs and innovative solutions to help plants reach their full potential. The document describes the raw material requirements, manufacturing process, and basic components involved in a typical coal-based rotary kiln system for producing sponge iron.
Tp cfb 13_01
This document discusses the benefits of circulating fluidized bed (CFB) technology compared to conventional solid fuel generation technologies. CFB technology offers improved efficiencies, reduced emissions, fuel flexibility, and lower costs. It can burn a wide variety of fuels without needing secondary emission controls. The document highlights a recent project in South Korea that will use CFB technology to power four 550 MW generators, the largest CFB units to date. The CFB units can meet stringent emission limits without additional flue gas desulfurization equipment.
Mass and heat balance for duplex stainless steel production by conarc process
Mass balance and heat balance calculations are carried out for estimating inflow and outflow of materials and energy respectively in a process. Such calculations are required to get accurate composition of product with available raw materials. CONARC is a new electric steel making process using a twin shell electric arc furnace (EAF) which can handle raw materials input of solid steel scrap and hot metal in varying proportions.
In the present study an attempt has been made to develop a mathematical model for mass and heat balance for duplex stainless steel production by CONARC process. Case studies have been carried out by varying the amount of hot metal in the charge from 0% to 100%. Such variation shows proportionate increase in the amount of oxygen required, lime consumption and amount of slag formed along with the increase in chemical energy available for the process. However, electrical energy consumption reduces for SAF 2205 and 3RE60 duplex stainless steel production.
On the basis of the above case studies, it has been found that increased amount of hot metal increases the available chemical energy for the process and in turn it reduces the electrical energy requirement of CONARC process, ultimately leading to reduction in the power consumption and overall production cost.
leomi - Insertion Thermal Mass Flow Meter manufacturer.pptx
We are offering high quality Insertion Thermal Mass Flow Meter in India. Our product is made up of high-quality material, which ensures its long life.
Electrric arc furnace
The slide mainly tells you the brief introduction of the electric arc furnace, and whose development history, classification, and advantages.
Furnaces part1
The document discusses heat treatment furnaces and processes. It begins by classifying furnaces and describing general fuel economy measures. It then defines heat treatment, discusses its purposes and principles. Several heat treatment processes are outlined, including annealing, normalizing, hardening and tempering. The document concludes by describing different types of furnaces used for heat treatment, such as batch and continuous furnaces, as well as furnaces powered by gas, oil or electricity.
Adoption of supercritical technology (1)
India has significant coal reserves and is looking to adopt supercritical steam technology to generate more power while improving efficiency and reducing emissions. Supercritical plants can achieve efficiencies of up to 15% higher than subcritical plants through higher steam temperatures and pressures. However, developing high temperature alloy steels is a key challenge. A study analyzed the costs and technical feasibility of importing supercritical technology from other countries versus developing it domestically. The study found domestic development could reduce costs by around 30-40% compared to imports but would require 2-6 years to transfer the technology depending on the complexity of the plant design.
Similar to STEEL.pdf (20)
20150721 epd structural_tube_postverifica_02 (2) (1)
20150721 epd structural_tube_postverifica_02 (2) (1)
Types of Casting Furnaces, Inspection and cleaning of casting
Types of Casting Furnaces, Inspection and cleaning of casting
Mass and heat balance for duplex stainless steel production by conarc process
Mass and heat balance for duplex stainless steel production by conarc process
leomi - Insertion Thermal Mass Flow Meter manufacturer.pptx
leomi - Insertion Thermal Mass Flow Meter manufacturer.pptx
More from LEOMIInstruments1
LEOMI_BROCHURE_compressed (1)_compressed.pdf
LEOMI has developed ways to optimize your existing air & gas flow measurement systems. LEOMI has commissioned India’s first in-house latest State-of-the-art Wind Tunnel, Made in Germany for Air Velocity Calibration and anemometer calibration services. It is certified as per ISO-17025 and DAkkS Germany traceability for airflow velocity ranges from 0.2 m/s to 75 m/s with flow uniformity of ±0.2%.
High Temperature Thermal Mass Flow Meter
LEOMI is a manufacturing venture founded by experienced professionals with over two decades of expertise in technology and automation. Specializing in industrial measurement solutions, particularly Insertion Thermal Mass Flow Meters, LEOMI aims to enhance efficiency and optimize processes in rugged industrial conditions. With the support of MTS Engineers Pvt Ltd's expertise and a commitment to German standards from softflow.de, LEOMI offers affordable and reliable solutions. As an ISO 9001:2015 certified company, LEOMI prioritizes quality and customer satisfaction through effective quality management systems. Based in Gandhinagar, Gujarat, LEOMI is dedicated to meeting the diverse needs of its clients.
LEOMI_BROCHURE_compressed (1)_compressed.pdf
LEOMI has developed ways to optimize your existing air & gas flow measurement systems. LEOMI has commissioned India’s first in-house latest State-of-the-art Wind Tunnel, Made in Germany for Air Velocity Calibration and anemometer calibration services. It is certified as per ISO-17025 and DAkkS Germany traceability for airflow velocity ranges from 0.2 m/s to 75 m/s with flow uniformity of ±0.2%
LEOMI_BROCHURE Thermal Mass Flow Meter-586
As a technology developer of Insertion Thermal Mass Flow Meters, LEOMI has a manufacturing facility meeting German technology standards that allows us to meet the needs of the industries in every field. LEOMI has developed proven technologies and wide-ranging solutions. Our products and expertise have helped flow measurement advancement in dozens of industrial applications including compressed air, combustion air, bio gas, natural gas, flue gas, aeration air, corrosive process gases and many more.
LEOMI Instruments _ Company Presentation.
As a technology developer of Insertion Thermal Mass Flow Meters, LEOMI has a manufacturing facility meeting German technology standards that allows us to meet the needs of the industries in every field. LEOMI has developed proven technologies and wide-ranging solutions. Our products and expertise have helped flow measurement advancement in dozens of industrial applications including compressed air, combustion air, bio gas, natural gas, flue gas, aeration air, corrosive process gases and many more.
STEEL.pdf
Steel is the world’s most important engineering and construction material. Currently (year 2020) 1810 MT steel is produced world-wide for various uses. It is 100% recyclable and can be used infinitely. Steel Industries used advanced technologies and techniques to increase production yield rates and to facilitate the use of co-products. As a result of the intrinsic recyclability of steel, the value of the raw materials invested in steel production lasts far beyond the end of a steel products life. It is used in every aspect of our lives; in automotive to construction, home appliances to medical devices & many more.
STEEL.pdf
Steel is the world's most important construction material and in 2020, 1.81 billion metric tons were produced globally using two main processes: the blast furnace-basic oxygen furnace method which uses iron ore, coal and recycled steel, and the electric arc furnace method which uses recycled steel and electricity. Steel is 100% recyclable and can be reused infinitely. Coke ovens produce coke as fuel for blast furnaces and generate byproducts such as ammonia, coal tar and gases which can be captured. Many foundries use waste heat to power boilers and thermal mass flow meters are used in various steel foundry processes such as measuring blast air, coke oven gas, blast furnace gas, exhaust gases
STEEL.pdf
"Leomi’s insertion thermal mass flow meter (mass flow meter) is used in steel foundries for measuring gases that help in steel production processes."
STEEL.pdf
"Leomi’s insertion thermal mass flow meter (mass flow meter) is used in steel foundries for measuring gases that help in steel production processes."
STEEL.pdf
Steel is the world's most important construction material and in 2020, 1.81 billion metric tons were produced globally using two main processes: the blast furnace-basic oxygen furnace method which uses iron ore, coal and recycled steel, and the electric arc furnace method which uses recycled steel and electricity. Steel is 100% recyclable and can be reused infinitely. In steel production, thermal mass flow meters are used to measure gases like blast air, coke oven gas, blast furnace gas and natural gas, as well as exhaust, stack and emission gases. Thermal mass flow meters have advantages like not requiring separate temperature or pressure transmitters, easy installation in large ducts, and accuracy over a wide temperature range
Thermal Mass Flow Meter & Calorimetric Flow Meter in India
A continuous endeavour of more than two decades into the field of technologies and automation has inspired LEOMI Founders to start a manufacturing venture looking into the industrial measurement solutions (Insertion Thermal Mass Flow Meter) that optimizes life. LEOMI provides affordable and reliable solutions with the hands on expertise of MTS Engineers Pvt Ltd that has fueled reputed companies for industry specific technologies.
More from LEOMIInstruments1 (11)
Thermal Mass Flow Meter & Calorimetric Flow Meter in India
Thermal Mass Flow Meter & Calorimetric Flow Meter in India
Recently uploaded
20240605 QFM017 Machine Intelligence Reading List May 2024
Everything I found interesting about machines behaving intelligently during May 2024
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Infrastructure Challenges in Scaling RAG with Custom AI models
Building Retrieval-Augmented Generation (RAG) systems with open-source and custom AI models is a complex task. This talk explores the challenges in productionizing RAG systems, including retrieval performance, response synthesis, and evaluation. We’ll discuss how to leverage open-source models like text embeddings, language models, and custom fine-tuned models to enhance RAG performance. Additionally, we’ll cover how BentoML can help orchestrate and scale these AI components efficiently, ensuring seamless deployment and management of RAG systems in the cloud.
Uni Systems Copilot event_05062024_C.Vlachos.pdf
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
Imagine a world where machines not only perform tasks but also learn, adapt, and make decisions. This is the promise of Artificial Intelligence (AI), a technology that's not just enhancing our lives but revolutionizing entire industries.
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
Communications Mining Series - Zero to Hero - Session 1
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
UiPath Test Automation using UiPath Test Suite series, part 5
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Recently uploaded (20)
20240605 QFM017 Machine Intelligence Reading List May 2024
20240605 QFM017 Machine Intelligence Reading List May 2024
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Infrastructure Challenges in Scaling RAG with Custom AI models
Infrastructure Challenges in Scaling RAG with Custom AI models
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
Communications Mining Series - Zero to Hero - Session 1
Communications Mining Series - Zero to Hero - Session 1
UiPath Test Automation using UiPath Test Suite series, part 5
UiPath Test Automation using UiPath Test Suite series, part 5
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
STEEL.pdf
- 1. STEEL Steel is the world’s most important engineering and construction material. Currently (year 2020) 1810 MT steel is produced world-wide for various uses. It is 100% recyclable and can be used infinitely. Steel Industries used advanced technologies and techniques to increase production yield rates and to facilitate the use of co-products. As a result of the intrinsic recyclability of steel, the value of the raw materials invested in steel production lasts far beyond the end of a steel products life. It is used in every aspect of our lives; in automotive to construction, home appliances to medical devices & many more. STEEL IS PRODUCED BY TWO MAIN PROCESS The Blast Furnace- Basic Oxygen Furnace (BF-BOF) method
- 2. Electric Arc Furnace (EAF) method The key difference between the methods is the type of raw materials they consume. For the BF-BOF methods are predominantly iron ore, coal, and recycled steel, while the EAF method produces steel using mainly recycled steel and electricity. Depending on the plant configuration and availability of recycled steel, other sources of metallic iron such as direct-reduced iron (DRI) or hot metal can also be used in the EAF method. Aluminum, cast iron, and steel are the most commonly processed metals. The majority of coke comes from by-product coke ovens. The coke is prepared in brick furnaces and volatile gas by- products (primarily ammonia, coal tar, and gaseous compounds) are collected and saved. In recovery coke plants the waste gas exits into a waste heat recovery boiler which converts the excess heat into steam for power generation. In non-recovery coke plants, gas by-products collect in a common tunnel and exit via a stack. Many foundries use generated heat to run boilers for site power requirements, which involves measuring combustion air flow and fuel flow to boilers, and measuring stack exhaust gas. LEOMI THERMAL MASS FLOW METERS ARE IN VARIOUS STEEL FOUNDRY PROCESSES AS BELOW Measuring blast air into furnace Coke oven gas (COG ), Blast furnace gas (BF) & Natural gas Monitoring exhaust, stack, and emission gases Baghouse flow Nitrogen blanketing Continuous caster pneumatic systems LEOMI INSERTION THERMAL MASS FLOW METERS PROVIDES No moving parts, direct mass flow measurement do not require separate temperature or pressure transmitters Easy & cost effective installation in large duct possible Programmable user defined gas mixture possible
- 3. Long life & rugged sensor insensitive to dust and dirt Customised & cleanable sensor assembly possible Works well even in high moisture gases Versatile & Adjustable from various pipe dimensions Accurate over entire temperature ranges up to 400C Wide turn down ratio range 100:1 makes it more preferable for steel plants For your specific application of steel and power industry, explore our Gas wise application section.