Status report #2
•Download as PPTX, PDF•
0 likes•178 views
The team is working on a DC distribution controller to directly use free energy from solar panels without converting to AC. Recent tasks included finishing competition papers and proposals. Ongoing tasks involve economic analysis, design documentation, and simulations. Upcoming milestones are finalizing the competition paper, product selection, and building a prototype by purchasing parts in February and March.
Report
Share
Report
Share
![OVERALL NEED ,[object Object]](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
Status report #1
The team is working on a DC distribution controller to directly use free energy from solar panels without converting to AC. Their recent tasks included finishing an outline for an IEEE competition paper and meeting with a mentor. Upcoming tasks are to finish the competition paper, finalize the product selection list, and purchase products to build a prototype. Their schedule includes buying parts by January 10th, building a prototype by February, and programming an FPGA/microcontroller by March 5th.
Matthew Egan End of Assignment Presentation 2nd Rotation
This document summarizes Matthew Egan's co-op rotation at Eaton Corporation. It details his assignments organizing Eaton's series ratings database and beginning the launch process for a new microinverter circuit breaker. It also outlines accomplishments like centralizing test data and estimating the potential market for the new breaker. Matthew thanks his managers for their support and looks forward to his third co-op rotation and future career as an LDP in technical sales.
Project Controls Expo, 18th Nov 2014 - "The Computer Age and Estimating – Don...
Project Controls Expo, 18th Nov 2014 - "The Computer Age and Estimating – Don...Project Controls Expo
This document discusses the fundamentals of project cost estimating. It begins by introducing the speaker and discussing the evolution of calculation technology from simple abacuses to modern software. The core of the document then outlines the fundamentals of estimating, including defining estimates, reasons for preparing them, accuracy levels, methodologies, structure, risk/contingency, and other factors. It emphasizes understanding these fundamentals before using software and avoiding a "black box" approach. The document concludes by encouraging companies to train estimators, benchmark software, and capture data from past projects.Using Metrology Software to Capture Data for Reverse Engineering
The document discusses using metrology software to capture data for reverse engineering. It begins with introducing the presenters and defining reverse engineering as extracting design information by disassembling and analyzing components. It then provides an example of a company using a portable CMM and inspection software to scan parts, generate CAD models from the scans, and verify the models match the physical parts. The demonstration shows how measurement features can be quickly exported to CAD formats. In summary, reverse engineering has many applications and techniques that are constantly evolving, and understanding current processes is key to exploring new technology options.
Besf building renewal_021815
This document describes the Building Renewal Tool being developed by the Northwest Energy Efficiency Alliance to promote deep energy retrofits of commercial buildings. The tool provides an integrated analysis of technical and financial aspects to evaluate improving energy performance by over 35%. It is intended for owners of leased commercial offices over 20,000 square feet. The tool aims to demonstrate the business case for retrofits by quantifying energy savings as well as non-energy benefits like increased property value. It uses prototype buildings and limited predefined efficiency measures to quickly estimate retrofit costs, energy and cost savings, and returns on investment.
04.15.15 energy design assistance program tracker 2
- NREL is a national laboratory operated by the U.S. Department of Energy that focuses on energy efficiency and renewable energy.
- The presentation introduces EDAPT and OpenStudio, which were created to lower the administrative costs and make energy analysis cheaper for Energy Design Assistance programs.
- EDAPT is a web service that tracks project status, manages data and communications, and reports program-wide outcomes. It integrates with OpenStudio and EnergyPlus to automate energy modeling and analysis.
Computer-Aided Engineering
Computer-aided engineering (CAE) uses computer software to analyze product designs and improve engineering processes. It allows engineers to evaluate designs through simulation rather than physical testing, saving time and money. The goals of CAE include improved product quality and safety, reduced engineering time through fewer design iterations, and reduced costs. Common CAE applications include finite element analysis, mechanism analysis, and fluid dynamics simulation. CAE provides significant benefits to production such as earlier problem identification and reduced warranty exposure.
A User's Perspective on IES Modeling
This document discusses using Integrated Environmental Solutions (IES) modeling software for building energy analysis and HVAC load calculations. IES allows for complex HVAC system modeling, daylighting integration, and computational fluid dynamics analysis. Sample projects demonstrate how IES can be used for shading and daylighting analysis, integrated daylighting and energy optimization, and natural ventilation studies. However, the document notes that IES interfaces may not be optimal for mechanical design and output files can be difficult for non-IES users. Validation of load calculations and energy models in IES requires additional software and manual steps.
Recommended
Status report #1
The team is working on a DC distribution controller to directly use free energy from solar panels without converting to AC. Their recent tasks included finishing an outline for an IEEE competition paper and meeting with a mentor. Upcoming tasks are to finish the competition paper, finalize the product selection list, and purchase products to build a prototype. Their schedule includes buying parts by January 10th, building a prototype by February, and programming an FPGA/microcontroller by March 5th.
Matthew Egan End of Assignment Presentation 2nd Rotation
This document summarizes Matthew Egan's co-op rotation at Eaton Corporation. It details his assignments organizing Eaton's series ratings database and beginning the launch process for a new microinverter circuit breaker. It also outlines accomplishments like centralizing test data and estimating the potential market for the new breaker. Matthew thanks his managers for their support and looks forward to his third co-op rotation and future career as an LDP in technical sales.
Project Controls Expo, 18th Nov 2014 - "The Computer Age and Estimating – Don...
Project Controls Expo, 18th Nov 2014 - "The Computer Age and Estimating – Don...Project Controls Expo
This document discusses the fundamentals of project cost estimating. It begins by introducing the speaker and discussing the evolution of calculation technology from simple abacuses to modern software. The core of the document then outlines the fundamentals of estimating, including defining estimates, reasons for preparing them, accuracy levels, methodologies, structure, risk/contingency, and other factors. It emphasizes understanding these fundamentals before using software and avoiding a "black box" approach. The document concludes by encouraging companies to train estimators, benchmark software, and capture data from past projects.Using Metrology Software to Capture Data for Reverse Engineering
The document discusses using metrology software to capture data for reverse engineering. It begins with introducing the presenters and defining reverse engineering as extracting design information by disassembling and analyzing components. It then provides an example of a company using a portable CMM and inspection software to scan parts, generate CAD models from the scans, and verify the models match the physical parts. The demonstration shows how measurement features can be quickly exported to CAD formats. In summary, reverse engineering has many applications and techniques that are constantly evolving, and understanding current processes is key to exploring new technology options.
Besf building renewal_021815
This document describes the Building Renewal Tool being developed by the Northwest Energy Efficiency Alliance to promote deep energy retrofits of commercial buildings. The tool provides an integrated analysis of technical and financial aspects to evaluate improving energy performance by over 35%. It is intended for owners of leased commercial offices over 20,000 square feet. The tool aims to demonstrate the business case for retrofits by quantifying energy savings as well as non-energy benefits like increased property value. It uses prototype buildings and limited predefined efficiency measures to quickly estimate retrofit costs, energy and cost savings, and returns on investment.
04.15.15 energy design assistance program tracker 2
- NREL is a national laboratory operated by the U.S. Department of Energy that focuses on energy efficiency and renewable energy.
- The presentation introduces EDAPT and OpenStudio, which were created to lower the administrative costs and make energy analysis cheaper for Energy Design Assistance programs.
- EDAPT is a web service that tracks project status, manages data and communications, and reports program-wide outcomes. It integrates with OpenStudio and EnergyPlus to automate energy modeling and analysis.
Computer-Aided Engineering
Computer-aided engineering (CAE) uses computer software to analyze product designs and improve engineering processes. It allows engineers to evaluate designs through simulation rather than physical testing, saving time and money. The goals of CAE include improved product quality and safety, reduced engineering time through fewer design iterations, and reduced costs. Common CAE applications include finite element analysis, mechanism analysis, and fluid dynamics simulation. CAE provides significant benefits to production such as earlier problem identification and reduced warranty exposure.
A User's Perspective on IES Modeling
This document discusses using Integrated Environmental Solutions (IES) modeling software for building energy analysis and HVAC load calculations. IES allows for complex HVAC system modeling, daylighting integration, and computational fluid dynamics analysis. Sample projects demonstrate how IES can be used for shading and daylighting analysis, integrated daylighting and energy optimization, and natural ventilation studies. However, the document notes that IES interfaces may not be optimal for mechanical design and output files can be difficult for non-IES users. Validation of load calculations and energy models in IES requires additional software and manual steps.
SAMSUNG LCD TELEVISION - DISTRIBUTION CHANNEL RELATIONSHIP AND MARKET SHARE A...
# PRIMARY OBJECTIVES
The primary objective of the study is to analyse the market share and understand the distribution channel relationship with reference to SAMSUNG ELECTRONICS INDIA PVT LTD.
# SECONDARY OBJECTIVES
To find out the counter share of SAMSUNG LCD TVs.
To find out the counter size of the dealer as well as the different brands kept by different dealers.
To record who are the major players of LCD TVs.
To find out the largest selling model among all the segments.
To know whether the dealer is aware of current pricelist.
To find out whether the dealer is having brochure of the product.
To know the benefits a dealer wants so that he is satisfied by selling the products.
Channels of distribution
This document discusses marketing channels and distribution. It defines marketing channels as the interconnected organizations involved in making a product available for consumption. Channels of distribution include multiple levels from manufacturers to consumers, such as wholesalers and retailers. Intermediaries are middlemen that take ownership of goods and sell them for profit. Key intermediaries discussed are wholesalers, retailers, and agent middlemen like brokers. Important factors in choosing distribution channels include product characteristics, market forces, institutional capabilities, and environmental considerations.
Distribution channels marketing management ppt
The document discusses key aspects of channels including their nature, design, management and conflicts. It describes how channels help distribute products efficiently by utilizing specialized intermediaries. The document outlines factors to consider in channel design like customer needs, objectives and alternative structures. It also discusses evaluating alternatives based on economic and control criteria. Finally, the summary highlights how channel members are selected, motivated and evaluated over time to ensure good performance.
Channels of distribution
This document provides an overview of channels of distribution from a presentation on sales and advertising management. It defines channels of distribution as the ways that goods and services are distributed from manufacturers to consumers. The document outlines various definitions of channels of distribution from different authors. It discusses the characteristics and elements of channels of distribution, including that they are routes that goods and services flow through composed of intermediaries like wholesalers and retailers. The document also covers the functions of channels of distribution, factors that determine choice of channels, and factors relating to products, companies, markets, middlemen, and the environment that influence channel selection.
DISTRIBUTION CHANNELS
The document discusses physical distribution and distribution channels. It defines physical distribution as moving tangible products through distribution channels. Physical distribution management involves activities like order processing, inventory control, inventory location and warehousing, materials handling, and transportation. When designing marketing channels, marketers consider factors like setting distribution objectives, specifying distribution tasks, developing alternative channel structures, evaluating relevant variables, and selecting channel members. Channel structure dimensions include the number of levels, intensity at various levels, and types of intermediaries. Variables affecting channel structure are market variables, product variables, company variables, intermediary variables, and environmental/behavioral variables. The key is developing a channel structure that aligns with objectives and considers all relevant factors.
Status report #4
Team #1 submitted their status report #4 on their project to design a DC distribution controller system. They have ordered remaining parts to be delivered by February 6th and will test and verify parts by February 12th. They will construct a prototype by February 20th and order any additional parts needed by February 27th. They will finalize the microcontroller programming for the system by March 10th.
Status report #5
Team #1 is designing a system to control and distribute DC power from solar panels to a DC circuit. They constructed a DC controller prototype, ordered additional parts, and planned their senior design demonstration. Upcoming tasks include finalizing their DC to DC converter design and fabricating their senior design demo.
Status report #6
Team #1 is designing a system to take energy from solar PV arrays and batteries and distribute it safely through a DC circuit using a controller. They recently tested a DC-DC converter and ordered additional parts. Upcoming tasks include developing a microcontroller algorithm, further testing prototype parts and the DC-DC converter, fabricating a senior design demo, and testing battery charging with the prototype.
Status report #3
Team #1 submitted their status report #3 on their project to design a DC distribution controller system. They have ordered remaining parts to be delivered by February 6th and will test and verify parts by February 12th. They will construct a prototype by February 20th and order any additional parts needed by February 27th. They will finalize the microcontroller programming for the system by March 10th.
Yizhe_Liu_Resume_11092016
Yizhe Liu has over 10 years of experience in electronics design and power electronics. He has worked on projects involving solar inverters, battery management systems, motor drives, and more. His experience includes circuit design, algorithm development, simulation, component selection, project planning and risk analysis. He is proficient in tools like Cadence, Altium, LabVIEW, and MATLAB/Simulink.
DFMA study of an Emergency lamp
This document summarizes a project on redesigning emergency lamps to improve manufacturing and assembly. The original lamp design had 27 components and took 5580 seconds to assemble, resulting in an assembly efficiency of 0.00645. The redesigned lamp was developed using DFMA methodology. It has 19 components and takes 4200 seconds to assemble, giving an assembly efficiency of 0.01071, an improvement of 39.76%. Material costs were reduced from INR 234,000 to INR 214,000, a savings of 8.54%. The redesign focused on reducing size, parts count and switching to more efficient LED lights.
Ferdinand Hong Boon Pun CV
This document provides a summary of Hong Boon Pun's personal details, education qualifications, skills, employment history and references. It outlines his most recent role as a Project Engineer from 2014 to 2016, previous roles including Facilities Section Manager and Facilities Engineer, and education including a Bachelor's degree in Electrical and Electronics Engineering. It also lists two referees and their contact details.
Arnold Labares Early Career Notable Projects [downloadable]
Arnold Labares led several notable engineering projects early in his career:
1) He designed a new metal carrier for stacking modules that increased yield from 93% to 99.3% for a flash memory manufacturing line.
2) He automated the creation of generic mechanical drawings, reducing drawing generation time from 3 days to 1.5 hours.
3) He redesigned JEDEC trays for flash memory products to reduce packaging cracks from shipping.
Review of Development done in Computerization of Electrical Specifications fo...
In the past, the process of preparation of Electrical Specification for Transformers was carried out by drafting in AutoCAD and Transformer Design calculations were done manually based on output data obtained from Disintegrated Transformer Design programs. In today's competitive environment, where design cycles have reduced drastically, it becomes imperative to fully computerize the Electrical Specification Document Generation for Transformer Design to speed up the whole design process.
Hcd 70 Split Waveguide
This document provides a project definition and design details for a split waveguide to be installed on an HCD-70 ion beam system. The split waveguide will allow access to new multi-coil assemblies intended to enhance the beam profile after deceleration. Key aspects of the design include splitting the existing waveguide into fixed and floating chambers, installing new multi-coil assemblies with field extending bars, and modifying related components like the ground lens and magnet yoke. Testing of prototypes indicated some tuning issues with the new design which require further iterations.
FYP_Presentation_Group_3.pptx
The document outlines a final year project to design a single phase pure sine wave hybrid photovoltaic inverter that can convert DC power from a solar panel into AC power to supply home appliances, with a block diagram, timeline, objectives to create a cost-effective inverter that generates a pure sine wave and charges a 12W battery, and questions from three student group members and their supervisor.
Resume - Hasitha Ketanwila
Hasitha Ketanwila is a mechanical engineer with over 5 years of experience in HVAC design, sales, and project management. He holds a Bachelor's degree in Mechanical Engineering and has worked on numerous commercial and industrial projects in Australia, Sri Lanka, Bangladesh, and the Maldives. Ketanwila is proficient in HVAC design software such as AutoCAD, RevitMEP, and has in-depth knowledge of Australian mechanical standards. He currently works as a Mechanical Design Engineer at Intrax Consulting Engineers in Australia.
Mike Leeper Resume
Michael A. Leeper is an electrical engineer with experience in electronic systems design, printed circuit board design, and troubleshooting. He has a BS in Electrical Engineering from New Mexico State University and post-graduate coursework from UC Berkeley. His experience includes work as an engineer at several companies developing electronic systems for industries such as semiconductor manufacturing and disk drives.
Sheet1WBSTask Name1Product development1.1 Electronics1.1.1 .docx
The document outlines a project plan for developing two prototypes (P1 and P2) and releasing a new product for an environmental management organization. Key activities include electronics, software, mechanical, and verification work. Electronics tasks include circuit design and testing. Software work includes specifications, design, and multiple releases for testing. Mechanical work involves industrial design, CAD modeling, and part modifications. Verification includes testing components, modules, systems, and obtaining regulatory approvals. The plan identifies dependencies between tasks, resource requirements, and milestones for go/no-go decisions.
llusho_resume
Herta Lusho is seeking an electrical engineering position and has over 5 years of relevant experience. She holds a Master's degree in Robotic Engineering and Bachelor's degree in Electrical Engineering from the University of Detroit Mercy, where she graduated with a 3.82 GPA. Her experience includes over 2 years as a Substation Design Associate Engineer at DTE Energy, where she prepares substation designs, manages contracting firms, and performs cost analysis. She also has internship experience in distribution operations planning, smart grid projects, automotive safety testing, and more. Herta is proficient in engineering software like LabView, AutoCAD, and Matlab.
Ranhnel R Navarez Resume
Ranhnel Navarez is currently a Process and Maintenance Engineer at HGST, a Western Digital Company, where he has worked for 18 years in various engineering roles. He holds a Bachelor of Technology degree in Electrical Engineering and is seeking new opportunities. He has extensive experience in process engineering, failure analysis, maintenance, and quality assurance in the electronics manufacturing industry.
More Related Content
Viewers also liked
SAMSUNG LCD TELEVISION - DISTRIBUTION CHANNEL RELATIONSHIP AND MARKET SHARE A...
# PRIMARY OBJECTIVES
The primary objective of the study is to analyse the market share and understand the distribution channel relationship with reference to SAMSUNG ELECTRONICS INDIA PVT LTD.
# SECONDARY OBJECTIVES
To find out the counter share of SAMSUNG LCD TVs.
To find out the counter size of the dealer as well as the different brands kept by different dealers.
To record who are the major players of LCD TVs.
To find out the largest selling model among all the segments.
To know whether the dealer is aware of current pricelist.
To find out whether the dealer is having brochure of the product.
To know the benefits a dealer wants so that he is satisfied by selling the products.
Channels of distribution
This document discusses marketing channels and distribution. It defines marketing channels as the interconnected organizations involved in making a product available for consumption. Channels of distribution include multiple levels from manufacturers to consumers, such as wholesalers and retailers. Intermediaries are middlemen that take ownership of goods and sell them for profit. Key intermediaries discussed are wholesalers, retailers, and agent middlemen like brokers. Important factors in choosing distribution channels include product characteristics, market forces, institutional capabilities, and environmental considerations.
Distribution channels marketing management ppt
The document discusses key aspects of channels including their nature, design, management and conflicts. It describes how channels help distribute products efficiently by utilizing specialized intermediaries. The document outlines factors to consider in channel design like customer needs, objectives and alternative structures. It also discusses evaluating alternatives based on economic and control criteria. Finally, the summary highlights how channel members are selected, motivated and evaluated over time to ensure good performance.
Channels of distribution
This document provides an overview of channels of distribution from a presentation on sales and advertising management. It defines channels of distribution as the ways that goods and services are distributed from manufacturers to consumers. The document outlines various definitions of channels of distribution from different authors. It discusses the characteristics and elements of channels of distribution, including that they are routes that goods and services flow through composed of intermediaries like wholesalers and retailers. The document also covers the functions of channels of distribution, factors that determine choice of channels, and factors relating to products, companies, markets, middlemen, and the environment that influence channel selection.
DISTRIBUTION CHANNELS
The document discusses physical distribution and distribution channels. It defines physical distribution as moving tangible products through distribution channels. Physical distribution management involves activities like order processing, inventory control, inventory location and warehousing, materials handling, and transportation. When designing marketing channels, marketers consider factors like setting distribution objectives, specifying distribution tasks, developing alternative channel structures, evaluating relevant variables, and selecting channel members. Channel structure dimensions include the number of levels, intensity at various levels, and types of intermediaries. Variables affecting channel structure are market variables, product variables, company variables, intermediary variables, and environmental/behavioral variables. The key is developing a channel structure that aligns with objectives and considers all relevant factors.
Viewers also liked (6)
SAMSUNG LCD TELEVISION - DISTRIBUTION CHANNEL RELATIONSHIP AND MARKET SHARE A...
SAMSUNG LCD TELEVISION - DISTRIBUTION CHANNEL RELATIONSHIP AND MARKET SHARE A...
Similar to Status report #2
Status report #4
Team #1 submitted their status report #4 on their project to design a DC distribution controller system. They have ordered remaining parts to be delivered by February 6th and will test and verify parts by February 12th. They will construct a prototype by February 20th and order any additional parts needed by February 27th. They will finalize the microcontroller programming for the system by March 10th.
Status report #5
Team #1 is designing a system to control and distribute DC power from solar panels to a DC circuit. They constructed a DC controller prototype, ordered additional parts, and planned their senior design demonstration. Upcoming tasks include finalizing their DC to DC converter design and fabricating their senior design demo.
Status report #6
Team #1 is designing a system to take energy from solar PV arrays and batteries and distribute it safely through a DC circuit using a controller. They recently tested a DC-DC converter and ordered additional parts. Upcoming tasks include developing a microcontroller algorithm, further testing prototype parts and the DC-DC converter, fabricating a senior design demo, and testing battery charging with the prototype.
Status report #3
Team #1 submitted their status report #3 on their project to design a DC distribution controller system. They have ordered remaining parts to be delivered by February 6th and will test and verify parts by February 12th. They will construct a prototype by February 20th and order any additional parts needed by February 27th. They will finalize the microcontroller programming for the system by March 10th.
Yizhe_Liu_Resume_11092016
Yizhe Liu has over 10 years of experience in electronics design and power electronics. He has worked on projects involving solar inverters, battery management systems, motor drives, and more. His experience includes circuit design, algorithm development, simulation, component selection, project planning and risk analysis. He is proficient in tools like Cadence, Altium, LabVIEW, and MATLAB/Simulink.
DFMA study of an Emergency lamp
This document summarizes a project on redesigning emergency lamps to improve manufacturing and assembly. The original lamp design had 27 components and took 5580 seconds to assemble, resulting in an assembly efficiency of 0.00645. The redesigned lamp was developed using DFMA methodology. It has 19 components and takes 4200 seconds to assemble, giving an assembly efficiency of 0.01071, an improvement of 39.76%. Material costs were reduced from INR 234,000 to INR 214,000, a savings of 8.54%. The redesign focused on reducing size, parts count and switching to more efficient LED lights.
Ferdinand Hong Boon Pun CV
This document provides a summary of Hong Boon Pun's personal details, education qualifications, skills, employment history and references. It outlines his most recent role as a Project Engineer from 2014 to 2016, previous roles including Facilities Section Manager and Facilities Engineer, and education including a Bachelor's degree in Electrical and Electronics Engineering. It also lists two referees and their contact details.
Arnold Labares Early Career Notable Projects [downloadable]
Arnold Labares led several notable engineering projects early in his career:
1) He designed a new metal carrier for stacking modules that increased yield from 93% to 99.3% for a flash memory manufacturing line.
2) He automated the creation of generic mechanical drawings, reducing drawing generation time from 3 days to 1.5 hours.
3) He redesigned JEDEC trays for flash memory products to reduce packaging cracks from shipping.
Review of Development done in Computerization of Electrical Specifications fo...
In the past, the process of preparation of Electrical Specification for Transformers was carried out by drafting in AutoCAD and Transformer Design calculations were done manually based on output data obtained from Disintegrated Transformer Design programs. In today's competitive environment, where design cycles have reduced drastically, it becomes imperative to fully computerize the Electrical Specification Document Generation for Transformer Design to speed up the whole design process.
Hcd 70 Split Waveguide
This document provides a project definition and design details for a split waveguide to be installed on an HCD-70 ion beam system. The split waveguide will allow access to new multi-coil assemblies intended to enhance the beam profile after deceleration. Key aspects of the design include splitting the existing waveguide into fixed and floating chambers, installing new multi-coil assemblies with field extending bars, and modifying related components like the ground lens and magnet yoke. Testing of prototypes indicated some tuning issues with the new design which require further iterations.
FYP_Presentation_Group_3.pptx
The document outlines a final year project to design a single phase pure sine wave hybrid photovoltaic inverter that can convert DC power from a solar panel into AC power to supply home appliances, with a block diagram, timeline, objectives to create a cost-effective inverter that generates a pure sine wave and charges a 12W battery, and questions from three student group members and their supervisor.
Resume - Hasitha Ketanwila
Hasitha Ketanwila is a mechanical engineer with over 5 years of experience in HVAC design, sales, and project management. He holds a Bachelor's degree in Mechanical Engineering and has worked on numerous commercial and industrial projects in Australia, Sri Lanka, Bangladesh, and the Maldives. Ketanwila is proficient in HVAC design software such as AutoCAD, RevitMEP, and has in-depth knowledge of Australian mechanical standards. He currently works as a Mechanical Design Engineer at Intrax Consulting Engineers in Australia.
Mike Leeper Resume
Michael A. Leeper is an electrical engineer with experience in electronic systems design, printed circuit board design, and troubleshooting. He has a BS in Electrical Engineering from New Mexico State University and post-graduate coursework from UC Berkeley. His experience includes work as an engineer at several companies developing electronic systems for industries such as semiconductor manufacturing and disk drives.
Sheet1WBSTask Name1Product development1.1 Electronics1.1.1 .docx
The document outlines a project plan for developing two prototypes (P1 and P2) and releasing a new product for an environmental management organization. Key activities include electronics, software, mechanical, and verification work. Electronics tasks include circuit design and testing. Software work includes specifications, design, and multiple releases for testing. Mechanical work involves industrial design, CAD modeling, and part modifications. Verification includes testing components, modules, systems, and obtaining regulatory approvals. The plan identifies dependencies between tasks, resource requirements, and milestones for go/no-go decisions.
llusho_resume
Herta Lusho is seeking an electrical engineering position and has over 5 years of relevant experience. She holds a Master's degree in Robotic Engineering and Bachelor's degree in Electrical Engineering from the University of Detroit Mercy, where she graduated with a 3.82 GPA. Her experience includes over 2 years as a Substation Design Associate Engineer at DTE Energy, where she prepares substation designs, manages contracting firms, and performs cost analysis. She also has internship experience in distribution operations planning, smart grid projects, automotive safety testing, and more. Herta is proficient in engineering software like LabView, AutoCAD, and Matlab.
Ranhnel R Navarez Resume
Ranhnel Navarez is currently a Process and Maintenance Engineer at HGST, a Western Digital Company, where he has worked for 18 years in various engineering roles. He holds a Bachelor of Technology degree in Electrical Engineering and is seeking new opportunities. He has extensive experience in process engineering, failure analysis, maintenance, and quality assurance in the electronics manufacturing industry.
ptsresume[1]
Peter Scott has over 30 years of experience as an instrument engineer working on projects in the oil and gas industry. He is currently working for ConocoPhillips on a DCS replacement project. Previously he has worked for ABB, Amec, and other engineering companies on projects involving control system upgrades, instrumentation design, and commissioning. He has a background as an instrument technician and holds an HNC in industrial measurement and control.
RESUME BRAHM_105660511
Brahm Pratap has over 12 years of experience in electronics engineering. He has a diploma in electronics engineering and has worked on projects involving PCB design, testing, and troubleshooting. Currently, he works as a senior engineer doing PCB design at C&S Electric Ltd. His responsibilities include designing PCBs, interacting with vendors and customers, and providing support to R&D and production.
mollette resume3
Christopher Mollette is an electrical engineer with 16 years of experience in industrial instrumentation, automation, process engineering, and project management. He has skills in PLC programming, PID control, process loop design, SCADA systems, and troubleshooting industrial equipment. His experience includes projects focused on efficiency improvements, cost reductions, and maximizing production.
AMEC IPE Solution_ISEIT 2006
This document discusses integrated project execution (IPE) and the AMEC Paragon solution. IPE aims to enable collaboration across parties, applications, and locations involved in engineering, procurement, and construction projects. The AMEC solution utilizes various software like Aveva, FileNet, PDMS to integrate key project processes like engineering design, procurement, document management. This integrated approach allows for improved quality, reduced timescales, minimized risk through increased visibility and consistency across projects.
Similar to Status report #2 (20)
Arnold Labares Early Career Notable Projects [downloadable]
Arnold Labares Early Career Notable Projects [downloadable]
Review of Development done in Computerization of Electrical Specifications fo...
Review of Development done in Computerization of Electrical Specifications fo...
Sheet1WBSTask Name1Product development1.1 Electronics1.1.1 .docx
Sheet1WBSTask Name1Product development1.1 Electronics1.1.1 .docx
Status report #2
- 1. Team #1 Gerardo Trevino Jeremy Halbardier Javier Guerrero OlakunleSosanya DC DISTRUBUTION CONTROLLER STATUS REPORT #2 1/25/2010
- 3. Power is lost in the conversion from DC to AC
- 4. Eliminate the need for the conversion and use DC directly List of design Milestones (with target dates) Buy parts Build prototype Program FPGA/Microcontroller
- 5. Recent tasks Wrapping up CCET/IEEE competition paper. Bringing business team up to speed in the project process. Submit budget proposal.
- 6. Ongoing/Pending Tasks Finish economic analysis for product (paper) Finish design section (paper) Purchase prototype parts. Simulate circuit in FPGA Learn C-Neuron language.
- 7. Upcoming Tasks Finish IEEE/CCET competition paper Finalize product selection list Purchase products to build prototype
- 8. Schedule January 10 February March 5 March 26
- 10. Questions
- 11. DC to DC