Statistical Quality Control
•Download as PPTX, PDF•
0 likes•15 views
Quality characteristics are properties of a product that are essential to its performance and reduce issues for consumers and production. They can be measurable variables or attributable traits. A quality population consists of all possible values a quality characteristic can take, whether continuous or discrete. Natural limits refer to ranges that include 99.73% of values for a quality characteristic, providing a standard for stability.
Report
Share
Report
Share
Recommended
Quality andc apability hand out 091123200010 Phpapp01
The document outlines key concepts in quality management and Six Sigma methodology. It discusses definitions of quality, total quality management (TQM), and Six Sigma. Six Sigma aims to reduce defects through eliminating variation and achieving near zero defect levels. It uses a Define-Measure-Analyze-Improve-Control (DMAIC) methodology. Statistical process control charts and process capability indices are also introduced to measure quality performance. An example of Mumbai's successful lunch delivery system achieving over 5-sigma quality levels is provided.
Quality management
This document provides an overview of quality management. It discusses traditional business strategies and how most companies now focus on quality. It defines inspection and quality, and describes the nature, objectives, and scope of inspections. It also covers statistical quality control, acceptance sampling techniques, total quality management, and modern quality management approaches including Deming's work. The key aspects covered include the importance of quality, different approaches to quality control, defining inspection and quality, the objectives and scope of inspections, statistical process control using charts, acceptance sampling plans, total quality management principles, and Deming's contributions to modern quality management.
6 sigma in manufacturing
Six Sigma is a set of techniques and tools for process improvement that aims to reduce defects to 3.4 defects per million opportunities. It was pioneered by Motorola and General Electric in manufacturing to improve quality and reliability. The key aspects of Six Sigma are specifying quality from the customer's perspective, defining defects, ensuring process capability, reducing variation, achieving stable operations, and designing for Six Sigma. Communication is important for successful implementation to address resistance to change. Benefits include reduced costs and waste, improved understanding of customer needs, and more robust products and processes. Many companies have successfully implemented Six Sigma including Motorola, 3M, and General Cable.
A Brief Concept of Quality
- Definition and dimensions of quality;
- Quality characteristics or critical-to-quality characteristics;
- Management aspect of quality improvement:
> Quality planning;
> Quality assurance;
> Quality control and improvement.
QM-026-Quality Management
The document provides an overview of various quality management concepts and tools including:
- Total Quality Management (TQM) which aims to design high quality products and ensure consistent production.
- Six Sigma which seeks to reduce process variation and eliminate defects through tools like DMAIC (Define, Measure, Analyze, Improve, Control).
- ISO 9000 standards for quality management systems which many companies adopt for global competitiveness.
- Various analytical tools used in quality improvement like control charts, flow diagrams and cause-and-effect diagrams.
Process design to process validation
The document discusses key concepts in Quality by Design (QbD) for pharmaceutical product development including establishing a Quality Target Product Profile, identifying Critical Quality Attributes and linking them to Critical Material Attributes and Critical Process Parameters through Design of Experiments. It provides examples of applying QbD principles like developing a design space for a tablet formulation through a multifactorial study of variables impacting dissolution and using a Design of Experiments approach to assess blending process parameters. The document emphasizes that quality is built into products through design rather than testing and stresses the importance of process understanding and control based on scientific principles.
Process Design to Process Validation
The document discusses key concepts in Quality by Design (QbD) for pharmaceutical product development including establishing a Quality Target Product Profile, identifying Critical Quality Attributes and linking them to Critical Material Attributes and Critical Process Parameters through Design of Experiments. It provides examples of establishing a design space for a tablet formulation through a multifactorial study of variables affecting dissolution and for a blending process through assessment of process parameters. The importance of developing a control strategy based on the design space to ensure final product quality is also highlighted.
Recommended
Quality andc apability hand out 091123200010 Phpapp01
The document outlines key concepts in quality management and Six Sigma methodology. It discusses definitions of quality, total quality management (TQM), and Six Sigma. Six Sigma aims to reduce defects through eliminating variation and achieving near zero defect levels. It uses a Define-Measure-Analyze-Improve-Control (DMAIC) methodology. Statistical process control charts and process capability indices are also introduced to measure quality performance. An example of Mumbai's successful lunch delivery system achieving over 5-sigma quality levels is provided.
Quality management
This document provides an overview of quality management. It discusses traditional business strategies and how most companies now focus on quality. It defines inspection and quality, and describes the nature, objectives, and scope of inspections. It also covers statistical quality control, acceptance sampling techniques, total quality management, and modern quality management approaches including Deming's work. The key aspects covered include the importance of quality, different approaches to quality control, defining inspection and quality, the objectives and scope of inspections, statistical process control using charts, acceptance sampling plans, total quality management principles, and Deming's contributions to modern quality management.
6 sigma in manufacturing
Six Sigma is a set of techniques and tools for process improvement that aims to reduce defects to 3.4 defects per million opportunities. It was pioneered by Motorola and General Electric in manufacturing to improve quality and reliability. The key aspects of Six Sigma are specifying quality from the customer's perspective, defining defects, ensuring process capability, reducing variation, achieving stable operations, and designing for Six Sigma. Communication is important for successful implementation to address resistance to change. Benefits include reduced costs and waste, improved understanding of customer needs, and more robust products and processes. Many companies have successfully implemented Six Sigma including Motorola, 3M, and General Cable.
A Brief Concept of Quality
- Definition and dimensions of quality;
- Quality characteristics or critical-to-quality characteristics;
- Management aspect of quality improvement:
> Quality planning;
> Quality assurance;
> Quality control and improvement.
QM-026-Quality Management
The document provides an overview of various quality management concepts and tools including:
- Total Quality Management (TQM) which aims to design high quality products and ensure consistent production.
- Six Sigma which seeks to reduce process variation and eliminate defects through tools like DMAIC (Define, Measure, Analyze, Improve, Control).
- ISO 9000 standards for quality management systems which many companies adopt for global competitiveness.
- Various analytical tools used in quality improvement like control charts, flow diagrams and cause-and-effect diagrams.
Process design to process validation
The document discusses key concepts in Quality by Design (QbD) for pharmaceutical product development including establishing a Quality Target Product Profile, identifying Critical Quality Attributes and linking them to Critical Material Attributes and Critical Process Parameters through Design of Experiments. It provides examples of applying QbD principles like developing a design space for a tablet formulation through a multifactorial study of variables impacting dissolution and using a Design of Experiments approach to assess blending process parameters. The document emphasizes that quality is built into products through design rather than testing and stresses the importance of process understanding and control based on scientific principles.
Process Design to Process Validation
The document discusses key concepts in Quality by Design (QbD) for pharmaceutical product development including establishing a Quality Target Product Profile, identifying Critical Quality Attributes and linking them to Critical Material Attributes and Critical Process Parameters through Design of Experiments. It provides examples of establishing a design space for a tablet formulation through a multifactorial study of variables affecting dissolution and for a blending process through assessment of process parameters. The importance of developing a control strategy based on the design space to ensure final product quality is also highlighted.
Reliability Training Lesson 1 Basics
Reliability is the ability of a system or component to perform its required functions under stated conditions for a specified period of time. This document discusses key reliability concepts including the bathtub curve, reliability applications in different industries, reliability improvement strategies, and reliability-centered maintenance. It also defines important reliability terms and explains how reliability is important for reducing costs and improving customer satisfaction.
Validation and calibration of equipment
The document discusses validation and calibration of equipment used in the pharmaceutical industry. It defines validation as establishing evidence that a process will consistently produce quality products. Calibration ensures instrument readings are accurate by comparing them to standards. The FDA provides guidelines for validation. Key equipment discussed include tablet presses, dissolution apparatus, friability equipment, balances, and stability chambers. Specifications and operating parameters are provided for each.
Quality control and improvement concepts
Here i have presented concepts of quality control and improvements which are processing at backends rather than practically.
Risk Management integrated pub
This document discusses how to implement an integrated risk management approach across the quality management system. It outlines how risk management is often separated by subsystem, method, and focus currently. It then provides recommendations on how to start an integrated approach, including getting senior management approval and defining an integration strategy. Key elements of the integrated strategy discussed include focusing on risk to the patient/user, understanding the risk chain and areas of responsibility and control, and controlling outputs throughout the product lifecycle from design to use. The document then provides examples of how risk levels can be integrated into various quality processes like supplier management, process validation, and CAPA to focus efforts where risks are highest.
Ch8 total+qlty+mgt
Total Quality Management (TQM) is defined as managing the entire organization so that it excels on all dimensions of products and services that are important to the customer. TQM involves defining quality, measuring processes and performance, analyzing causes of defects, improving processes by removing defects, and controlling quality. Key aspects of TQM include Six Sigma methodology, ISO standards, continuous improvement concepts, and tools for statistical process control.
Introduction to Statistical Applications for Process Validation
This presentation from IVT's 2nd Annual Validation Week Canada covers the 2011 FDA Process validation and the subsequent statistical processes. Statistics in process validation is introduced as well as the integration with six sigma and solutions to common mistakes.
Quality Management
The document provides an overview of quality management presented by the Society of Statistical Quality Control Engineers in Bhopal. It defines quality, traces the growth of quality management from craftsmen era to total quality management. It discusses measuring quality through quality indices and costs, highlighting approaches from quality gurus like Deming, Juran, Crosby, Ishikawa and Taguchi. The road ahead is described as marching towards total quality management and its key principles.
Bio Summit
The document discusses Accugenix's value proposition as a provider of microbial identification testing services. It outlines intangible benefits to stakeholders like quality, safety, risk management, and financial benefits. It also discusses how accurate microbial identification can help companies manage risk, track trends, make better decisions, and avoid issues like plant shutdowns or FDA warnings. Finally, it summarizes Accugenix's service offerings and how their proprietary methods and large validated library can provide high quality identifications at a lower cost than other options.
Marwan Shehata-CV.pdf
Mechanical Design Engineer with 5 years of experience in custom machinery, robotic grippers, and precision machines while maintaining DFx principles.
Finite Element Analysis by Mr Duha PhD
The document discusses developing a 3D finite element model to analyze the temperature field during gas metal arc welding of a dissimilar metals pipe-flange joint. It aims to investigate the effect of welding heat input on weld pool geometry and determine suitable parameters for welding different metal combinations. The model uses the Goldak double ellipsoidal heat source model and considers temperature-dependent material properties and heat losses through convection and radiation. Results show weld pool geometry and temperature distribution for similar metal welds of low carbon steel and dissimilar welds joining stainless steel to low carbon steel or stainless steel.
Machinability of Composite Materials.pptx
This document discusses a bachelor project on composites conducted by three students and supervised by Prof. Dr. Helmi Abdel Maksoud Youssef. It examines the machinability of aluminum-silicon alloy composites reinforced with nickel microparticles and aluminum oxide nanoparticles. Experiments were conducted to evaluate how drilling parameters like speed, feed force, and drill diameter affect power consumption, depth, and specific cutting resistance. Results showed that nano- and micro-composites had better machinability than the base alloy due to their higher ductility and strength. Microhardness was also measured for the different specimens.
SPE membership certificate
Marwan Zeitoun joined SPE in 2015. This certificate certifies that Marwan Zeitoun joined SPE in 2015. Janeen Judah, 2017 President and Mark Rubin, CEO and Executive VP signed the certificate.
Coursera projects101 2016
Marwan Shehata Mohamed successfully completed the Coursera online course "Fundamentals of Project Planning and Management" on October 05, 2015. The course introduced concepts of project planning, Agile Project Management, critical path method, network analysis, and simulation for project risk analysis to equip learners with the language and mindset for planning and managing successful projects. The completion was certified by Yael Grushka-Cockayne, Associate Professor of Business Administration at the Darden School of Business, University of Virginia.
Certificate
This certificate verifies that Marwan Shehata Mohamed Zeitoun successfully completed and passed the online course "PIPE01x: Introduction to Oil Country Tubular Goods (OCTG)" offered by TenarisUniversity through edX. The course was directed by Mario Vespa of Tenaris and Rolando Lange of TenarisUniversity. The certificate can be verified online at the provided URL.
Zahran - Training Final Report
Zahran Group is a leading manufacturer and distributor of household equipment in Egypt. It was founded in 1967 and has manufacturing facilities and stores across Egypt. The document describes Zahran's manufacturing process for cookware, which involves several steps: laser cutting stainless steel, deep drawing, blanking, hydroforming, induction heating, screw pressing, spot welding handles, and plating. It also discusses plastic products made through injection molding of materials like ABS and PP.
Lord Report_Last
1. Lord Precision Industries manufactures three types of blades from martensitic stainless steel sheets: 22.2mm double blades, 17mm lower blades, and 14mm upper blades.
2. The manufacturing process involves punching blades from steel sheets using dies, heat treatment to increase hardness, grinding blade tips to shape, coating blades with chemicals, packaging, and quality inspections throughout.
3. Advanced machines like CNC are used to precision grind blades, while conventional machines are also employed for maintenance and flexibility. Quality is ensured through microscopy, hardness testing, and measuring blade features and cutting ability.
Ergonomics project - Alexandria University
We are here discussing the problems that Egyptian Copper Works faces and steps to solve ergonomics problems
More Related Content
Similar to Statistical Quality Control
Reliability Training Lesson 1 Basics
Reliability is the ability of a system or component to perform its required functions under stated conditions for a specified period of time. This document discusses key reliability concepts including the bathtub curve, reliability applications in different industries, reliability improvement strategies, and reliability-centered maintenance. It also defines important reliability terms and explains how reliability is important for reducing costs and improving customer satisfaction.
Validation and calibration of equipment
The document discusses validation and calibration of equipment used in the pharmaceutical industry. It defines validation as establishing evidence that a process will consistently produce quality products. Calibration ensures instrument readings are accurate by comparing them to standards. The FDA provides guidelines for validation. Key equipment discussed include tablet presses, dissolution apparatus, friability equipment, balances, and stability chambers. Specifications and operating parameters are provided for each.
Quality control and improvement concepts
Here i have presented concepts of quality control and improvements which are processing at backends rather than practically.
Risk Management integrated pub
This document discusses how to implement an integrated risk management approach across the quality management system. It outlines how risk management is often separated by subsystem, method, and focus currently. It then provides recommendations on how to start an integrated approach, including getting senior management approval and defining an integration strategy. Key elements of the integrated strategy discussed include focusing on risk to the patient/user, understanding the risk chain and areas of responsibility and control, and controlling outputs throughout the product lifecycle from design to use. The document then provides examples of how risk levels can be integrated into various quality processes like supplier management, process validation, and CAPA to focus efforts where risks are highest.
Ch8 total+qlty+mgt
Total Quality Management (TQM) is defined as managing the entire organization so that it excels on all dimensions of products and services that are important to the customer. TQM involves defining quality, measuring processes and performance, analyzing causes of defects, improving processes by removing defects, and controlling quality. Key aspects of TQM include Six Sigma methodology, ISO standards, continuous improvement concepts, and tools for statistical process control.
Introduction to Statistical Applications for Process Validation
This presentation from IVT's 2nd Annual Validation Week Canada covers the 2011 FDA Process validation and the subsequent statistical processes. Statistics in process validation is introduced as well as the integration with six sigma and solutions to common mistakes.
Quality Management
The document provides an overview of quality management presented by the Society of Statistical Quality Control Engineers in Bhopal. It defines quality, traces the growth of quality management from craftsmen era to total quality management. It discusses measuring quality through quality indices and costs, highlighting approaches from quality gurus like Deming, Juran, Crosby, Ishikawa and Taguchi. The road ahead is described as marching towards total quality management and its key principles.
Bio Summit
The document discusses Accugenix's value proposition as a provider of microbial identification testing services. It outlines intangible benefits to stakeholders like quality, safety, risk management, and financial benefits. It also discusses how accurate microbial identification can help companies manage risk, track trends, make better decisions, and avoid issues like plant shutdowns or FDA warnings. Finally, it summarizes Accugenix's service offerings and how their proprietary methods and large validated library can provide high quality identifications at a lower cost than other options.
Similar to Statistical Quality Control (9)
Introduction to Statistical Applications for Process Validation
Introduction to Statistical Applications for Process Validation
More from Marwan Shehata
Marwan Shehata-CV.pdf
Mechanical Design Engineer with 5 years of experience in custom machinery, robotic grippers, and precision machines while maintaining DFx principles.
Finite Element Analysis by Mr Duha PhD
The document discusses developing a 3D finite element model to analyze the temperature field during gas metal arc welding of a dissimilar metals pipe-flange joint. It aims to investigate the effect of welding heat input on weld pool geometry and determine suitable parameters for welding different metal combinations. The model uses the Goldak double ellipsoidal heat source model and considers temperature-dependent material properties and heat losses through convection and radiation. Results show weld pool geometry and temperature distribution for similar metal welds of low carbon steel and dissimilar welds joining stainless steel to low carbon steel or stainless steel.
Machinability of Composite Materials.pptx
This document discusses a bachelor project on composites conducted by three students and supervised by Prof. Dr. Helmi Abdel Maksoud Youssef. It examines the machinability of aluminum-silicon alloy composites reinforced with nickel microparticles and aluminum oxide nanoparticles. Experiments were conducted to evaluate how drilling parameters like speed, feed force, and drill diameter affect power consumption, depth, and specific cutting resistance. Results showed that nano- and micro-composites had better machinability than the base alloy due to their higher ductility and strength. Microhardness was also measured for the different specimens.
SPE membership certificate
Marwan Zeitoun joined SPE in 2015. This certificate certifies that Marwan Zeitoun joined SPE in 2015. Janeen Judah, 2017 President and Mark Rubin, CEO and Executive VP signed the certificate.
Coursera projects101 2016
Marwan Shehata Mohamed successfully completed the Coursera online course "Fundamentals of Project Planning and Management" on October 05, 2015. The course introduced concepts of project planning, Agile Project Management, critical path method, network analysis, and simulation for project risk analysis to equip learners with the language and mindset for planning and managing successful projects. The completion was certified by Yael Grushka-Cockayne, Associate Professor of Business Administration at the Darden School of Business, University of Virginia.
Certificate
This certificate verifies that Marwan Shehata Mohamed Zeitoun successfully completed and passed the online course "PIPE01x: Introduction to Oil Country Tubular Goods (OCTG)" offered by TenarisUniversity through edX. The course was directed by Mario Vespa of Tenaris and Rolando Lange of TenarisUniversity. The certificate can be verified online at the provided URL.
Zahran - Training Final Report
Zahran Group is a leading manufacturer and distributor of household equipment in Egypt. It was founded in 1967 and has manufacturing facilities and stores across Egypt. The document describes Zahran's manufacturing process for cookware, which involves several steps: laser cutting stainless steel, deep drawing, blanking, hydroforming, induction heating, screw pressing, spot welding handles, and plating. It also discusses plastic products made through injection molding of materials like ABS and PP.
Lord Report_Last
1. Lord Precision Industries manufactures three types of blades from martensitic stainless steel sheets: 22.2mm double blades, 17mm lower blades, and 14mm upper blades.
2. The manufacturing process involves punching blades from steel sheets using dies, heat treatment to increase hardness, grinding blade tips to shape, coating blades with chemicals, packaging, and quality inspections throughout.
3. Advanced machines like CNC are used to precision grind blades, while conventional machines are also employed for maintenance and flexibility. Quality is ensured through microscopy, hardness testing, and measuring blade features and cutting ability.
Ergonomics project - Alexandria University
We are here discussing the problems that Egyptian Copper Works faces and steps to solve ergonomics problems
Solution to the Electronics Project using LTspice
This document is a student's electronics project report consisting of 12 pages. It details experiments conducted with a 1N5371B diode to analyze its characteristics and behavior in different circuit configurations. The student measures current values under varying resistor loads to determine minimum resistances. Voltage measurements are taken across different load resistances. The document also examines a rectifier circuit using diodes and the effect of reducing or increasing the smoothing capacitor on the resulting current waveform.
Pickup and Styli types - pickups for magnetic products
To measure the surface roughness of a magnetic part, a non-magnetic stylus should be used along with an inductance pickup. An inductance pickup measures the distance between the surface and pickup without interference from magnetic fields. A ruby ball stylus is suitable as ruby is a hard, non-magnetic ceramic material that minimizes wear. Using a non-magnetic stylus and pickup prevents magnetic flux from interfering with electrical signals and producing inaccurate readings during surface roughness measurement of magnetic parts.
Types of laser used in laser cutting machines
The document discusses different types of lasers used in machining. It describes solid-state lasers like ruby and YAG lasers. Gas lasers like CO2 are commonly used for machining nonmetals. Neodymium-glass lasers can produce very short, high power pulses for research. Neodymium-YAG lasers can produce over 1 kW of continuous power and are used for machining and laser fusion research. Excimer lasers have short ultraviolet wavelengths and can precisely machine materials through direct vaporization without heat damage.
Report on Hardness test
This document discusses different methods for measuring hardness in materials:
1. The Rockwell hardness test uses a diamond or steel ball indenter that is pressed into the material under a minor and then major load. The permanent increase in depth from the major load is used to calculate the Rockwell hardness number.
2. The Brinell hardness test uses a 10mm steel or carbide ball pressed into the material under a 3000kg load. The diameter of the indentation is measured to calculate the Brinell hardness number.
3. The Vickers hardness test uses a diamond pyramid indenter pressed into the material. The average of the diagonal lengths of the resulting indentation is used to calculate the Vickers hardness number.
Report on EDM,LJM, USM & ECM
1. The document discusses several non-conventional machining processes including EDM, LBM, USM, ECM, and wire EDM. EDM uses electrical discharges to erode metal away layer by layer. LBM uses a focused laser beam to melt and vaporize material. USM uses an oscillating tool to grind materials away with abrasives. ECM removes material electrochemically using electrolysis principles.
2. Each process has advantages like precision machining of difficult materials without tool contact or heat-affected zones, but also limitations such as high costs or inability to machine non-conductive materials. Parameters like power levels, abrasives, or electrolytes must be optimized for best results.
Geometrical Metrology: Bearing seats on shaft and in housings
This 6-page document discusses geometrical metrology parameters for bearing seats on shafts and in housings. It defines cylindricity, perpendicularity, and runout, explaining their importance in ensuring proper alignment and reducing premature failure of bearings and other rotating components. Cylindricity refers to how much a surface may deviate from a perfect cylinder. Perpendicularity ensures bearing surfaces are square to the shaft centerline. Runout measures deviation from true rotation and can cause misalignment if too high. The document emphasizes that following specified tolerances for these parameters is crucial for reliability.
More from Marwan Shehata (19)
A Hands-on Introduction to Engineering Simulations
A Hands-on Introduction to Engineering Simulations
Pickup and Styli types - pickups for magnetic products
Pickup and Styli types - pickups for magnetic products
Geometrical Metrology: Bearing seats on shaft and in housings
Geometrical Metrology: Bearing seats on shaft and in housings
Recently uploaded
06-04-2024 - NYC Tech Week - Discussion on Vector Databases, Unstructured Dat...
06-04-2024 - NYC Tech Week - Discussion on Vector Databases, Unstructured Data and AI
Discussion on Vector Databases, Unstructured Data and AI
https://www.meetup.com/unstructured-data-meetup-new-york/
This meetup is for people working in unstructured data. Speakers will come present about related topics such as vector databases, LLMs, and managing data at scale. The intended audience of this group includes roles like machine learning engineers, data scientists, data engineers, software engineers, and PMs.This meetup was formerly Milvus Meetup, and is sponsored by Zilliz maintainers of Milvus.
一比一原版(Glasgow毕业证书)格拉斯哥大学毕业证如何办理
毕业原版【微信:41543339】【(Glasgow毕业证书)格拉斯哥大学毕业证】【微信:41543339】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信41543339】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信41543339】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Learn SQL from basic queries to Advance queries
Dive into the world of data analysis with our comprehensive guide on mastering SQL! This presentation offers a practical approach to learning SQL, focusing on real-world applications and hands-on practice. Whether you're a beginner or looking to sharpen your skills, this guide provides the tools you need to extract, analyze, and interpret data effectively.
Key Highlights:
Foundations of SQL: Understand the basics of SQL, including data retrieval, filtering, and aggregation.
Advanced Queries: Learn to craft complex queries to uncover deep insights from your data.
Data Trends and Patterns: Discover how to identify and interpret trends and patterns in your datasets.
Practical Examples: Follow step-by-step examples to apply SQL techniques in real-world scenarios.
Actionable Insights: Gain the skills to derive actionable insights that drive informed decision-making.
Join us on this journey to enhance your data analysis capabilities and unlock the full potential of SQL. Perfect for data enthusiasts, analysts, and anyone eager to harness the power of data!
#DataAnalysis #SQL #LearningSQL #DataInsights #DataScience #Analytics
Global Situational Awareness of A.I. and where its headed
You can see the future first in San Francisco.
Over the past year, the talk of the town has shifted from $10 billion compute clusters to $100 billion clusters to trillion-dollar clusters. Every six months another zero is added to the boardroom plans. Behind the scenes, there’s a fierce scramble to secure every power contract still available for the rest of the decade, every voltage transformer that can possibly be procured. American big business is gearing up to pour trillions of dollars into a long-unseen mobilization of American industrial might. By the end of the decade, American electricity production will have grown tens of percent; from the shale fields of Pennsylvania to the solar farms of Nevada, hundreds of millions of GPUs will hum.
The AGI race has begun. We are building machines that can think and reason. By 2025/26, these machines will outpace college graduates. By the end of the decade, they will be smarter than you or I; we will have superintelligence, in the true sense of the word. Along the way, national security forces not seen in half a century will be un-leashed, and before long, The Project will be on. If we’re lucky, we’ll be in an all-out race with the CCP; if we’re unlucky, an all-out war.
Everyone is now talking about AI, but few have the faintest glimmer of what is about to hit them. Nvidia analysts still think 2024 might be close to the peak. Mainstream pundits are stuck on the wilful blindness of “it’s just predicting the next word”. They see only hype and business-as-usual; at most they entertain another internet-scale technological change.
Before long, the world will wake up. But right now, there are perhaps a few hundred people, most of them in San Francisco and the AI labs, that have situational awareness. Through whatever peculiar forces of fate, I have found myself amongst them. A few years ago, these people were derided as crazy—but they trusted the trendlines, which allowed them to correctly predict the AI advances of the past few years. Whether these people are also right about the next few years remains to be seen. But these are very smart people—the smartest people I have ever met—and they are the ones building this technology. Perhaps they will be an odd footnote in history, or perhaps they will go down in history like Szilard and Oppenheimer and Teller. If they are seeing the future even close to correctly, we are in for a wild ride.
Let me tell you what we see.
一比一原版(UO毕业证)渥太华大学毕业证如何办理
UO毕业证录取书【微信95270640】购买（渥太华大学毕业证成绩单硕士学历）Q微信95270640代办UO学历认证留信网伪造渥太华大学学位证书精仿渥太华大学本科/硕士文凭证书补办渥太华大学 diplomaoffer,Transcript购买渥太华大学毕业证成绩单购买UO假毕业证学位证书购买伪造渥太华大学文凭证书学位证书,专业办理雅思、托福成绩单，学生ID卡，在读证明，海外各大学offer录取通知书，毕业证书，成绩单，文凭等材料:1:1完美还原毕业证、offer录取通知书、学生卡等各种在读或毕业材料的防伪工艺（包括 烫金、烫银、钢印、底纹、凹凸版、水印、防伪光标、热敏防伪、文字图案浮雕，激光镭射，紫外荧光，温感光标）学校原版上有的工艺我们一样不会少，不论是老版本还是最新版本，都能保证最高程度还原，力争完美以求让所有同学都能享受到完美的品质服务。
文凭办理流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：微信95270640我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）。
7完成交易删除客户资料
高精端提供以下服务：
一：渥太华大学渥太华大学毕业证文凭证书全套材料从防伪到印刷水印底纹到钢印烫金
二：真实使馆认证（留学人员回国证明）使馆存档
三：真实教育部认证教育部存档教育部留服网站可查
四：留信认证留学生信息网站可查
五：与学校颁发的相关证件1:1纸质尺寸制定（定期向各大院校毕业生购买最新版本毕,业证成绩单保证您拿到的是鲁昂大学内部最新版本毕业证成绩单微信95270640）
A.为什么留学生需要操作留信认证?
留信认证全称全国留学生信息服务网认证,隶属于北京中科院。①留信认证门槛条件更低,费用更美丽,并且包过,完单周期短,效率高②留信认证虽然不能去国企,但是一般的公司都没有问题,因为国内很多公司连基本的留学生学历认证都不了解。这对于留学生来说,这就比自己光拿一个证书更有说服力,因为留学学历可以在留信网站上进行查询!
B.为什么我们提供的毕业证成绩单具有使用价值？
查询留服认证是国内鉴别留学生海外学历的唯一途径但认证只是个体行为不是所有留学生都操作所以没有办理认证的留学生的学历在国内也是查询不到的他们也仅仅只有一张文凭。所以这时候我们提供的和学校颁发的一模一样的毕业证成绩单就有了使用价值。只硕大的蛇皮袋手里拎着长铁钩正站在门口朝黑色的屋内张望不好坏人小偷山娃一怔却也灵机一动立马仰起头双手拢在嘴边朝楼上大喊：“爸爸爸——有人找——那人一听朝山娃尴尬地笑笑悻悻地走了山娃立马“嘭的一声将铁门锁死心却咚咚地乱跳当山娃跟父亲说起这事时父亲很吃惊抚摸着山娃的头说还好醒得及时要不家早被人掏空了到时连电视也没得看啰不过父亲还是夸山娃能临危不乱随机应变有胆有谋山娃笑笑说那都是书上学的看童话和小说时多
一比一原版(UIUC毕业证)伊利诺伊大学|厄巴纳-香槟分校毕业证如何办理
UIUC毕业证offer【微信95270640】☀《伊利诺伊大学|厄巴纳-香槟分校毕业证购买》GoogleQ微信95270640《UIUC毕业证模板办理》加拿大文凭、本科、硕士、研究生学历都可以做,二、业务范围：
★、全套服务：毕业证、成绩单、化学专业毕业证书伪造《伊利诺伊大学|厄巴纳-香槟分校大学毕业证》Q微信95270640《UIUC学位证书购买》
(诚招代理)办理国外高校毕业证成绩单文凭学位证,真实使馆公证（留学回国人员证明）真实留信网认证国外学历学位认证雅思代考国外学校代申请名校保录开请假条改GPA改成绩ID卡
1.高仿业务:【本科硕士】毕业证,成绩单（GPA修改）,学历认证（教育部认证）,大学Offer,,ID,留信认证,使馆认证,雅思,语言证书等高仿类证书；
2.认证服务: 学历认证（教育部认证）,大使馆认证（回国人员证明）,留信认证（可查有编号证书）,大学保录取,雅思保分成绩单。
3.技术服务：钢印水印烫金激光防伪凹凸版设计印刷激凸温感光标底纹镭射速度快。
办理伊利诺伊大学|厄巴纳-香槟分校伊利诺伊大学|厄巴纳-香槟分校毕业证offer流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
-办理真实使馆公证（即留学回国人员证明）
-办理各国各大学文凭（世界名校一对一专业服务,可全程监控跟踪进度）
-全套服务：毕业证成绩单真实使馆公证真实教育部认证。让您回国发展信心十足！
（详情请加一下 文凭顾问+微信:95270640）欢迎咨询！的鬼地方父亲的家在高楼最底屋最下面很矮很黑是很不显眼的地下室父亲的家安在别人脚底下须绕过高楼旁边的垃圾堆下八个台阶才到父亲的家很狭小除了一张单人床和一张小方桌几乎没有多余的空间山娃一下子就联想起学校的男小便处山娃很想笑却怎么也笑不出来山娃很迷惑父亲的家除了一扇小铁门连窗户也没有墓穴一般阴森森有些骇人父亲的城也便成了山娃的城父亲的家也便成了山娃的家父亲让山娃呆在屋里做作业看电视最多只能在门口透透气间
Analysis insight about a Flyball dog competition team's performance
Insight of my analysis about a Flyball dog competition team's last year performance. Find more: https://github.com/rolandnagy-ds/flyball_race_analysis/tree/main
一比一原版(Adelaide毕业证书)阿德莱德大学毕业证如何办理
原版定制【微信:41543339】【(Adelaide毕业证书)阿德莱德大学毕业证】【微信:41543339】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信41543339】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信41543339】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(CBU毕业证)卡普顿大学毕业证如何办理
CBU毕业证offer【微信95270640】《卡普顿大学毕业证书》《QQ微信95270640》学位证书电子版：在线制作卡普顿大学毕业证成绩单GPA修改（制作CBU毕业证成绩单CBU文凭证书样本）、卡普顿大学毕业证书与成绩单样本图片、《CBU学历证书学位证书》、卡普顿大学毕业证案例毕业证书制作軟體、在线制作加拿大硕士学历证书真实可查.
如果您是以下情况，我们都能竭诚为您解决实际问题：【公司采用定金+余款的付款流程，以最大化保障您的利益，让您放心无忧】
1、在校期间，因各种原因未能顺利毕业，拿不到官方毕业证+微信95270640
2、面对父母的压力，希望尽快拿到卡普顿大学卡普顿大学毕业证成绩单；
3、不清楚流程以及材料该如何准备卡普顿大学卡普顿大学毕业证成绩单；
4、回国时间很长，忘记办理；
5、回国马上就要找工作，办给用人单位看；
6、企事业单位必须要求办理的；
面向美国乔治城大学毕业留学生提供以下服务:
【★卡普顿大学卡普顿大学毕业证成绩单毕业证、成绩单等全套材料，从防伪到印刷，从水印到钢印烫金，与学校100%相同】
【★真实使馆认证（留学人员回国证明），使馆存档可通过大使馆查询确认】
【★真实教育部认证，教育部存档，教育部留服网站可查】
【★真实留信认证，留信网入库存档，可查卡普顿大学卡普顿大学毕业证成绩单】
我们从事工作十余年的有着丰富经验的业务顾问，熟悉海外各国大学的学制及教育体系，并且以挂科生解决毕业材料不全问题为基础，为客户量身定制1对1方案，未能毕业的回国留学生成功搭建回国顺利发展所需的桥梁。我们一直努力以高品质的教育为起点，以诚信、专业、高效、创新作为一切的行动宗旨，始终把“诚信为主、质量为本、客户第一”作为我们全部工作的出发点和归宿点。同时为海内外留学生提供大学毕业证购买、补办成绩单及各类分数修改等服务；归国认证方面，提供《留信网入库》申请、《国外学历学位认证》申请以及真实学籍办理等服务，帮助众多莘莘学子实现了一个又一个梦想。
专业服务，请勿犹豫联系我
如果您真实毕业回国，对于学历认证无从下手，请联系我，我们免费帮您递交
诚招代理：本公司诚聘当地代理人员，如果你有业余时间，或者你有同学朋友需要，有兴趣就请联系我
你赢我赢，共创双赢
你做代理，可以帮助卡普顿大学同学朋友
你做代理，可以拯救卡普顿大学失足青年
你做代理，可以挽救卡普顿大学一个个人才
你做代理，你将是别人人生卡普顿大学的转折点
你做代理，可以改变自己，改变他人，给他人和自己一个机会道银边山娃摸索着扯了扯灯绳小屋顿时一片刺眼的亮瞅瞅床头的诺基亚山娃苦笑着摇了摇头连他自己都感到奇怪居然又睡到上午点半掐指算算随父亲进城已一个多星期了山娃几乎天天起得这么迟在乡下老家暑假五点多山娃就醒来在爷爷奶奶嘁嘁喳喳的忙碌声中一骨碌爬起把牛驱到后龙山再从莲塘里采回一蛇皮袋湿漉漉的莲蓬也才点多点半早就吃过早餐玩耍去了山娃的家在闽西山区依山傍水山清水秀门前潺潺流淌的蜿蜒小溪一直都是山娃和小伙伴们盛试
一比一原版(UofS毕业证书)萨省大学毕业证如何办理
原版定制【微信:41543339】【(UofS毕业证书)萨省大学毕业证】【微信:41543339】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信41543339】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信41543339】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(UniSA毕业证书)南澳大学毕业证如何办理
原版定制【微信:41543339】【(UniSA毕业证书)南澳大学毕业证】【微信:41543339】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信41543339】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信41543339】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
原版制作(Deakin毕业证书)迪肯大学毕业证学位证一模一样
学校原件一模一样【微信：741003700 】《(Deakin毕业证书)迪肯大学毕业证学位证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Enhanced Enterprise Intelligence with your personal AI Data Copilot.pdf
Recently we have observed the rise of open-source Large Language Models (LLMs) that are community-driven or developed by the AI market leaders, such as Meta (Llama3), Databricks (DBRX) and Snowflake (Arctic). On the other hand, there is a growth in interest in specialized, carefully fine-tuned yet relatively small models that can efficiently assist programmers in day-to-day tasks. Finally, Retrieval-Augmented Generation (RAG) architectures have gained a lot of traction as the preferred approach for LLMs context and prompt augmentation for building conversational SQL data copilots, code copilots and chatbots.
In this presentation, we will show how we built upon these three concepts a robust Data Copilot that can help to democratize access to company data assets and boost performance of everyone working with data platforms.
Why do we need yet another (open-source ) Copilot?
How can we build one?
Architecture and evaluation
一比一原版(UMN文凭证书)明尼苏达大学毕业证如何办理
毕业原版【微信:176555708】【(UMN毕业证书)明尼苏达大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(Chester毕业证书)切斯特大学毕业证如何办理
毕业原版【微信:41543339】【(Chester毕业证书)切斯特大学毕业证】【微信:41543339】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信41543339】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信41543339】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办(uts毕业证书)悉尼科技大学毕业证学历证书原版一模一样
原版一模一样【微信：741003700 】【(uts毕业证书)悉尼科技大学毕业证学历证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
一比一原版(UCSB文凭证书)圣芭芭拉分校毕业证如何办理
毕业原版【微信:176555708】【(UCSB毕业证书)圣芭芭拉分校毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
4th Modern Marketing Reckoner by MMA Global India & Group M: 60+ experts on W...
The Modern Marketing Reckoner (MMR) is a comprehensive resource packed with POVs from 60+ industry leaders on how AI is transforming the 4 key pillars of marketing – product, place, price and promotions.
The Ipsos - AI - Monitor 2024 Report.pdf
According to Ipsos AI Monitor's 2024 report, 65% Indians said that products and services using AI have profoundly changed their daily life in the past 3-5 years.
Recently uploaded (20)
06-04-2024 - NYC Tech Week - Discussion on Vector Databases, Unstructured Dat...
06-04-2024 - NYC Tech Week - Discussion on Vector Databases, Unstructured Dat...
Global Situational Awareness of A.I. and where its headed
Global Situational Awareness of A.I. and where its headed
Analysis insight about a Flyball dog competition team's performance
Analysis insight about a Flyball dog competition team's performance
Enhanced Enterprise Intelligence with your personal AI Data Copilot.pdf
Enhanced Enterprise Intelligence with your personal AI Data Copilot.pdf
Challenges of Nation Building-1.pptx with more important
Challenges of Nation Building-1.pptx with more important
4th Modern Marketing Reckoner by MMA Global India & Group M: 60+ experts on W...
4th Modern Marketing Reckoner by MMA Global India & Group M: 60+ experts on W...
Statistical Quality Control
- 1. 1
- 2. Process Control Quality Characteristics A certain property of the product which is essential for its performance and decrease consumer claims and production troubles. These Characteristics are classified into 2 types: 1.Measurable Quality Characteristics (Variable) 2.Attributable Quality Characteristics 2
- 3. 3
- 4. Quality Population Consists of all the possible values of the quality characteristics it can be a continuous or discrete population. 4
- 5. 5
- 6. 6
- 7. 7
- 8. 8
- 9. Stability or Natural Limits Natural limits are those limits which include most of the values of the quality characteristics practically they are usually taken: to give a probability of 99.73 % of these values. 9
- 10. 10
- 11. 11
- 12. 12
- 13. 13
- 14. 14
- 15. 15
- 16. 16
- 17. 17
- 18. 18
- 19. 19
- 20. 20
- 21. 21
- 22. 22
- 23. 23
- 24. 24
- 25. 25
- 26. 26
- 27. 27
- 28. 28
- 29. 29
- 30. 30
- 31. 31
- 32. 32
- 33. 33
- 34. 34
- 35. 35
- 36. 36
- 37. 37
- 38. 38
- 39. 39
- 40. 40
- 41. 41
- 42. 42
- 43. 43
- 44. 44
- 45. 45
- 46. 46
- 47. 47
- 48. 48
- 49. 49
- 50. 50
- 51. 51
- 52. 52
- 53. 53
- 54. 54
- 55. 55
- 56. 56
- 57. 57
- 58. 58
- 59. 59
- 60. 60
- 61. 61
- 62. 62
- 63. 63
- 64. 64
- 65. 65
- 66. 66
- 67. 67
- 68. 68
- 69. 69
- 70. 70
- 71. 71
- 72. 72
- 73. 73
- 74. 74
- 75. 75
- 76. 76
- 77. 77
- 78. 78
- 79. 79
- 80. 80
- 81. 81
- 82. 82
- 83. 83
- 84. 84
- 85. 85
- 86. 86
- 87. 87
- 88. 88
- 89. 89
- 90. 90
- 91. 91
- 92. 92
- 93. 93
- 94. 94
- 95. 95
- 96. 96
- 97. 97
- 98. 98
- 99. 99
- 100. 100
- 101. 101
- 102. 102
- 103. 103
- 104. 104
- 105. 105
- 106. 106
- 107. 107
- 108. 108
- 109. 109
- 110. 110
- 111. 111
- 112. 112
- 113. 113
- 114. 114
- 115. 115
- 116. 116
- 117. 117
- 118. 118
- 119. 119
- 120. 120
- 121. 121
- 122. 122