Quantum dots are nanometer-scale semiconductor crystals composed of groups II-VI or III-V elements. They are defined as particles smaller than the exciton Bohr radius, where excitons are confined in all three dimensions. Quantum dots were discovered in the 1980s during research in glass matrices and colloidal solutions. The size, energy levels, and emission color of quantum dots can be precisely controlled, and the absorption and emission wavelengths depend on dot size. Larger dots have longer wavelengths and lower frequencies than smaller dots.
The document discusses intermediate band quantum dot solar cells. It introduces that a quantum dot consists of a semiconductor particle surrounded by a larger bandgap material, creating discrete energy levels. An intermediate band solar cell aims to absorb sub-bandgap photons using an intermediate band created by closely spaced quantum dots in a lattice. This structure could potentially increase solar cell efficiency but challenges remain around weak sub-bandgap absorption, low voltages and costs that require further research.
Characterization methods - Nanoscience and nanotechnologiesNANOYOU
This document discusses characterization methods for nanomaterials, specifically microscopy and spectroscopy techniques. It describes scanning tunneling microscopy (STM) and atomic force microscopy (AFM) which allow imaging at the atomic scale. STM works by measuring tunneling current between a tip and conductive sample, which is translated into topographic images. It has been instrumental in advancing nanoscience by enabling visualization of materials at the nanoscale. The document also briefly mentions other microscopy and spectroscopy methods for nanomaterial analysis such as electron microscopy, X-ray techniques, and Raman spectroscopy.
This document discusses carbon nanotubes, including their structure, properties, production methods, and applications. Carbon nanotubes have a cylindrical structure composed entirely of sp2 bonds. They have excellent mechanical and thermal properties and can be metallic or semiconducting depending on their structure. Common production methods include arc discharge, laser ablation, and chemical vapor deposition. Potential applications of carbon nanotubes include use in structural materials, electronics, energy storage, and biomedicine. However, health effects of carbon nanotube inhalation require further study.
This document discusses composite materials for chromatographic column separations. It describes how composite materials made of organic and inorganic components can overcome limitations of conventional ion exchange resins by exhibiting improved mechanical strength, thermal and chemical stability, ion exchange capacity, and ability to be synthesized in granular form for column operations. Nanocomposites in particular are highlighted as having unusual property combinations and potential applications in areas like drug delivery, corrosion protection, and the automotive and electronics industries. The document outlines several applications of nanocomposites and their potential to enhance sensor performance and open new application horizons.
This document discusses inorganic and organic synthesis of nanocomposites through self-assembly. It begins by defining nanocomposites and describing different types including ceramic-matrix, polymer-matrix, polymer-silicate, elastomeric, and bionanocomposites. It then discusses synthesis methods using various biomolecules as templates, such as proteins, peptides, polysaccharides, and nucleic acids. Specific examples include protein-mediated hydroxyapatite and magnetic materials formation. Peptides and polysaccharides like chitosan are also described as mediating bioinspired synthesis. Nanocomposites find applications in areas like batteries, lightweight materials, and artificial joints.
Quantum dots are nanometer-scale semiconductor crystals composed of groups II-VI or III-V elements. They are defined as particles smaller than the exciton Bohr radius, where excitons are confined in all three dimensions. Quantum dots were discovered in the 1980s during research in glass matrices and colloidal solutions. The size, energy levels, and emission color of quantum dots can be precisely controlled, and the absorption and emission wavelengths depend on dot size. Larger dots have longer wavelengths and lower frequencies than smaller dots.
The document discusses intermediate band quantum dot solar cells. It introduces that a quantum dot consists of a semiconductor particle surrounded by a larger bandgap material, creating discrete energy levels. An intermediate band solar cell aims to absorb sub-bandgap photons using an intermediate band created by closely spaced quantum dots in a lattice. This structure could potentially increase solar cell efficiency but challenges remain around weak sub-bandgap absorption, low voltages and costs that require further research.
Characterization methods - Nanoscience and nanotechnologiesNANOYOU
This document discusses characterization methods for nanomaterials, specifically microscopy and spectroscopy techniques. It describes scanning tunneling microscopy (STM) and atomic force microscopy (AFM) which allow imaging at the atomic scale. STM works by measuring tunneling current between a tip and conductive sample, which is translated into topographic images. It has been instrumental in advancing nanoscience by enabling visualization of materials at the nanoscale. The document also briefly mentions other microscopy and spectroscopy methods for nanomaterial analysis such as electron microscopy, X-ray techniques, and Raman spectroscopy.
This document discusses carbon nanotubes, including their structure, properties, production methods, and applications. Carbon nanotubes have a cylindrical structure composed entirely of sp2 bonds. They have excellent mechanical and thermal properties and can be metallic or semiconducting depending on their structure. Common production methods include arc discharge, laser ablation, and chemical vapor deposition. Potential applications of carbon nanotubes include use in structural materials, electronics, energy storage, and biomedicine. However, health effects of carbon nanotube inhalation require further study.
This document discusses composite materials for chromatographic column separations. It describes how composite materials made of organic and inorganic components can overcome limitations of conventional ion exchange resins by exhibiting improved mechanical strength, thermal and chemical stability, ion exchange capacity, and ability to be synthesized in granular form for column operations. Nanocomposites in particular are highlighted as having unusual property combinations and potential applications in areas like drug delivery, corrosion protection, and the automotive and electronics industries. The document outlines several applications of nanocomposites and their potential to enhance sensor performance and open new application horizons.
This document discusses inorganic and organic synthesis of nanocomposites through self-assembly. It begins by defining nanocomposites and describing different types including ceramic-matrix, polymer-matrix, polymer-silicate, elastomeric, and bionanocomposites. It then discusses synthesis methods using various biomolecules as templates, such as proteins, peptides, polysaccharides, and nucleic acids. Specific examples include protein-mediated hydroxyapatite and magnetic materials formation. Peptides and polysaccharides like chitosan are also described as mediating bioinspired synthesis. Nanocomposites find applications in areas like batteries, lightweight materials, and artificial joints.
The document summarizes different methods for synthesizing cadmium sulfide (CdS) nanoparticles. It describes an aqueous precipitation method using cadmium nitrate and sodium sulfide precursors that produces yellow CdS precipitate. It also outlines a sol-gel method using cadmium acetate, diaminobenzene, and thioacetamide precursors that generates a CdS sol and gel. Additionally, it mentions a hydrothermal method using cadmium nitrate, thiourea, and hexamethylenetetramine precursors under high temperature and pressure that can control CdS morphology. The document provides an overview of various preparation techniques for CdS nanoparticles.
The document discusses polymer-matrix nanocomposites, which consist of a polymeric matrix with nanoscale particles dispersed within. Nanoparticles can control the fundamental properties of materials without changing their chemical composition. Polymer nanocomposites are classified based on the type of polymer matrix used, and can be prepared through various methods like solution casting or melt blending. They exhibit improved properties like electrical conductivity, optical transparency, and mechanical strength compared to conventional composites. Potential applications of polymer nanocomposites include in the automobile, energy storage, and coatings industries.
Nanocomposite biomaterials are multiphase solid materials where one phase has dimensions less than 100 nm. This nano-scale structure gives nanocomposites improved mechanical, electrical, thermal and other properties compared to their components. There are several types of nanocomposite biomaterials including ceramic-matrix nanocomposites, polymer-matrix nanocomposites, polymer-silicate nanocomposites, elastomeric nanocomposites, and bionanocomposites. Bionanocomposites are of particular interest for biomedical applications like tissue engineering due to their biocompatibility and ability to be biodegraded in the body.
This document outlines the defense of a PhD thesis on modeling time-aware web service interactions. The thesis defense outline includes an introduction, modeling of timed protocols, a theoretical study of the impacts of time, prototyping and applications, and a conclusion. The thesis examines how to model and analyze the impacts of time in interactions between web services, applications, clients, and databases across different integration technologies like RPC, MOM, and ESB.
Nanotechnology involves the study and manipulation of matter at the nanoscale, generally 1 to 100 nanometers. It is an emerging field with applications in materials science, electronics, medicine and more. Some key developments include Richard Feynman's vision of molecular nanotechnology in 1959, the discovery of fullerenes in 1985, and the invention of carbon nanotubes. Nanomaterials like nanoparticles, nanowires and quantum dots are being used in areas such as filtration, energy storage, and electronics. The future promises further advances in fields like healthcare, computing, and clean energy through nanotechnology.
This document discusses carbon nanotubes, their properties, synthesis, and applications in electronic devices. It describes that carbon nanotubes are cylindrical structures made of rolled graphene sheets that are only a few nanometers in width but can be many microns in length. They exist as single-walled nanotubes or multi-walled nanotubes. The document outlines different methods for synthesizing carbon nanotubes and reviews their applications, including uses in transparent conductive films, printable transistors, field emission, integrated circuits, fibers, and paper batteries. In conclusion, it states that carbon nanotubes are poised to replace silicon in miniaturizing electronic circuits and pushing beyond the theoretical limits of silicon transistors.
This document discusses ZnO nanostructures and their applications in nano-LEDs and nano-generators. It first provides background on ZnO, including its properties and common forms. It then describes the principles and synthesis methods of flexible nano-LEDs and piezoelectric nano-generators based on ZnO nanowires. Potential applications of these ZnO nanostructure devices include lighting, self-powered nanosystems, portable electronics and alternative energy.
Quantum dots - A potential elixir in the field of biologyBalaganesh Kuruba
This document discusses quantum dots, which are nanoscale semiconductor crystals with size-dependent optical and electronic properties. It covers their properties like tunable light emission, photostability, and ability to be functionalized. Methods of fabricating quantum dots are described, including colloidal synthesis and growth on substrates. Applications discussed include biological imaging, drug delivery, and sensing. Both advantages like brightness and disadvantages like potential toxicity are mentioned.
The document summarizes key topics related to nanosafety in a nanomaterials and nanotechnology course taught by Dr. XA Sun. It discusses potential hazards of nanomaterials, important considerations for nanosafety including proper personal protective equipment, engineering controls, and safe handling practices. It also notes challenges in characterizing nanomaterials and a lack of standards and regulations. The document emphasizes the need for more research on nanosafety and collaboration between researchers and environmental health and safety experts to develop effective safety protocols and practices.
The Lycurgus Cup is a rare example of a dichroic Roman glass vessel from the 4th century AD. It appears green when light is reflected off its surface but red when light shines through it, due to minute amounts of gold and silver added to the glass. Modern analysis showed the dichroism is caused by microscopic gold and silver crystals in the glass that scatter light differently depending on the light source. The cup also has an ornate decoration depicting the legend of King Lycurgus.
This document summarizes several nanofabrication technologies including buckyballs, carbon nanotubes, and methods for producing carbon nanotubes. Specifically, it discusses buckyballs being spherical carbon molecules and carbon nanotubes being long carbon tubes that can have conducting or semiconducting properties. It then describes three main production methods for carbon nanotubes: laser evaporation, carbon arc techniques, and chemical vapor deposition.
This document provides an overview of carbon nanotubes. It discusses the history of carbon nanotube discovery from the 1950s to 1991. It describes what carbon nanotubes are, which are tube-shaped materials made of carbon that have diameters on the nanometer scale. The document classifies carbon nanotubes based on chirality, layers, and conductivity. It outlines the properties of carbon nanotubes including their small size, strength, flexibility, and thermal and electrical conductivity. Methods for synthesizing carbon nanotubes are described, including arc discharge, laser ablation, and chemical vapor deposition. Applications of carbon nanotubes discussed include use in energy storage, molecular electronics, sensors, composites, and desalination
The document summarizes different methods for synthesizing cadmium sulfide (CdS) nanoparticles. It describes an aqueous precipitation method using cadmium nitrate and sodium sulfide precursors that produces yellow CdS precipitate. It also outlines a sol-gel method using cadmium acetate, diaminobenzene, and thioacetamide precursors that generates a CdS sol and gel. Additionally, it mentions a hydrothermal method using cadmium nitrate, thiourea, and hexamethylenetetramine precursors under high temperature and pressure that can control CdS morphology. The document provides an overview of various preparation techniques for CdS nanoparticles.
The document discusses polymer-matrix nanocomposites, which consist of a polymeric matrix with nanoscale particles dispersed within. Nanoparticles can control the fundamental properties of materials without changing their chemical composition. Polymer nanocomposites are classified based on the type of polymer matrix used, and can be prepared through various methods like solution casting or melt blending. They exhibit improved properties like electrical conductivity, optical transparency, and mechanical strength compared to conventional composites. Potential applications of polymer nanocomposites include in the automobile, energy storage, and coatings industries.
Nanocomposite biomaterials are multiphase solid materials where one phase has dimensions less than 100 nm. This nano-scale structure gives nanocomposites improved mechanical, electrical, thermal and other properties compared to their components. There are several types of nanocomposite biomaterials including ceramic-matrix nanocomposites, polymer-matrix nanocomposites, polymer-silicate nanocomposites, elastomeric nanocomposites, and bionanocomposites. Bionanocomposites are of particular interest for biomedical applications like tissue engineering due to their biocompatibility and ability to be biodegraded in the body.
This document outlines the defense of a PhD thesis on modeling time-aware web service interactions. The thesis defense outline includes an introduction, modeling of timed protocols, a theoretical study of the impacts of time, prototyping and applications, and a conclusion. The thesis examines how to model and analyze the impacts of time in interactions between web services, applications, clients, and databases across different integration technologies like RPC, MOM, and ESB.
Nanotechnology involves the study and manipulation of matter at the nanoscale, generally 1 to 100 nanometers. It is an emerging field with applications in materials science, electronics, medicine and more. Some key developments include Richard Feynman's vision of molecular nanotechnology in 1959, the discovery of fullerenes in 1985, and the invention of carbon nanotubes. Nanomaterials like nanoparticles, nanowires and quantum dots are being used in areas such as filtration, energy storage, and electronics. The future promises further advances in fields like healthcare, computing, and clean energy through nanotechnology.
This document discusses carbon nanotubes, their properties, synthesis, and applications in electronic devices. It describes that carbon nanotubes are cylindrical structures made of rolled graphene sheets that are only a few nanometers in width but can be many microns in length. They exist as single-walled nanotubes or multi-walled nanotubes. The document outlines different methods for synthesizing carbon nanotubes and reviews their applications, including uses in transparent conductive films, printable transistors, field emission, integrated circuits, fibers, and paper batteries. In conclusion, it states that carbon nanotubes are poised to replace silicon in miniaturizing electronic circuits and pushing beyond the theoretical limits of silicon transistors.
This document discusses ZnO nanostructures and their applications in nano-LEDs and nano-generators. It first provides background on ZnO, including its properties and common forms. It then describes the principles and synthesis methods of flexible nano-LEDs and piezoelectric nano-generators based on ZnO nanowires. Potential applications of these ZnO nanostructure devices include lighting, self-powered nanosystems, portable electronics and alternative energy.
Quantum dots - A potential elixir in the field of biologyBalaganesh Kuruba
This document discusses quantum dots, which are nanoscale semiconductor crystals with size-dependent optical and electronic properties. It covers their properties like tunable light emission, photostability, and ability to be functionalized. Methods of fabricating quantum dots are described, including colloidal synthesis and growth on substrates. Applications discussed include biological imaging, drug delivery, and sensing. Both advantages like brightness and disadvantages like potential toxicity are mentioned.
The document summarizes key topics related to nanosafety in a nanomaterials and nanotechnology course taught by Dr. XA Sun. It discusses potential hazards of nanomaterials, important considerations for nanosafety including proper personal protective equipment, engineering controls, and safe handling practices. It also notes challenges in characterizing nanomaterials and a lack of standards and regulations. The document emphasizes the need for more research on nanosafety and collaboration between researchers and environmental health and safety experts to develop effective safety protocols and practices.
The Lycurgus Cup is a rare example of a dichroic Roman glass vessel from the 4th century AD. It appears green when light is reflected off its surface but red when light shines through it, due to minute amounts of gold and silver added to the glass. Modern analysis showed the dichroism is caused by microscopic gold and silver crystals in the glass that scatter light differently depending on the light source. The cup also has an ornate decoration depicting the legend of King Lycurgus.
This document summarizes several nanofabrication technologies including buckyballs, carbon nanotubes, and methods for producing carbon nanotubes. Specifically, it discusses buckyballs being spherical carbon molecules and carbon nanotubes being long carbon tubes that can have conducting or semiconducting properties. It then describes three main production methods for carbon nanotubes: laser evaporation, carbon arc techniques, and chemical vapor deposition.
This document provides an overview of carbon nanotubes. It discusses the history of carbon nanotube discovery from the 1950s to 1991. It describes what carbon nanotubes are, which are tube-shaped materials made of carbon that have diameters on the nanometer scale. The document classifies carbon nanotubes based on chirality, layers, and conductivity. It outlines the properties of carbon nanotubes including their small size, strength, flexibility, and thermal and electrical conductivity. Methods for synthesizing carbon nanotubes are described, including arc discharge, laser ablation, and chemical vapor deposition. Applications of carbon nanotubes discussed include use in energy storage, molecular electronics, sensors, composites, and desalination
3. KAIST 만화창작동아리 열정부
알고 갑시다! -원고
원고 : 인쇄하기 전 내용
• 초고 : 처음 쓴 원고 (풀 초 草를 씁니다 저도 처음 앎)
• 개고·퇴고 : 원고를 고치는 것
• 송고 : 원고를 보내는 것
마감 : 우리의 운명
열정부에서는 보통 원고라고 부를만큼 분량이 많으면 회지에 단
편을 내는 경우이기 때문에, 그 경우만 원고라고 부릅니다.
• 매년 1~2회 만화 회지 ‘열정(PASSION)’을 제작합니다
• 회지, 개인지 등 만화책을 뭉뚱그려서 회지라고 부르기도 합니다 (2000
년대 초반 동인 문화에서 비롯된 것으로 보임)
4. KAIST 만화창작동아리 열정부
원고를 어떻게 그리죠??
저도 잘 몰라요
음… 일단 그리고 싶은 주제나 장면이 있을 겁니다
앞뒤로 어떤 장면이 있어야 할지 생각합니다
• 글콘티, 그림콘티를 만드는 게 도움이 됩니다
컷배치와 인물, 말풍선 등의 배치를 생각하고 페이지를 구성합니
다
그립니다
먹칠, 명암, 톤, 집중선 등을 넣습니다
식자를 합니다
5. KAIST 만화창작동아리 열정부
알고 갑시다! -식자
활판을 이용하던 시대,
낱자 하나하나(활자)를 틀에 조합하는 것을 뜻했습니다.
아날로그 출판만화 시대에서는
글자가 들어간 필름을 인화지에 감광하는 형태로 바뀌었습니다.
현대 만화에서는 뜻이 변형되어,
만화에 대사 등 텍스트를 심는 것을 총칭합니다.
불법스캔본의 유포가 성행하면서, 만화 식자를 해적 번역의 일부
로만 생각하는 경우가 많은데 잘못된 상식입니다. (나무위키를
믿지 마세요)
6. KAIST 만화창작동아리 열정부
알고 갑시다! -식자
과거 열정부의 식자 방법
• 워드로 타이핑
• 인쇄하여 오려냄
• 원고에 붙여서 복사(……)
현재 열정부의 식자 방법
• 디지털 작업 후 텍스트 상자로 식자
• 스캔 후 디지털 식자
7. KAIST 만화창작동아리 열정부
아날로그에서 디지털로
09년 이전 : 인쇄소 측에 제출할 때는 전부 인쇄해서 제출
09년 10호 회지 : 파일 인쇄 도입
12년 13호 회지 : 파일 제출
손으로 그렸다고 하더라도 스캔해서 파일로 제출이 원칙
• 스캔하는 법을 모른다면 물어보세요
8. KAIST 만화창작동아리 열정부
이게 중요한 게 아니고
이 세미나에서는 이미 ‘스틱맨이든 뭐든 만화는 그릴 수 있다’는 전제 하에
만화의 작법보다는, 편집·인쇄 과정에 대한 이해를 통해서
원고의 퀄리티를 높이는 데 중점을 두기로 하였습니다
9. KAIST 만화창작동아리 열정부
열정부의 만화
열정부에서는 크게 세 가지의 만화를 그립니다
• 1페이지 주간만화 “열변”
• 100페이지 가량의 반연간지 “열정”
• 부원 각자의 개인지
13. KAIST 만화창작동아리 열정부
열변을 내자!
A4 기준 위쪽 여백 45mm, 아래쪽 여백 25mm, 좌우 여백 5-
10mm
컬러, 회색조, 흑백 무관 (회색조로 인쇄)
JPG, PNG, PSD, CLIP 형식으로 제출 가능
PSD, CLIP 제출 시 레이어 병합하지 말고 제출
14. KAIST 만화창작동아리 열정부
열변을 내자!
식자할 때
• 최소 8pt 이상
• 가능한 한 10-11pt 유지
• 굴림체 쓰지 마세요(제발)
• 정 쓸만한 폰트가 없다하면 KoPub 돋움체를 쓰세요
• 배경이 어두워서 글씨가 잘 안 보이면 흰 테두리를 넣으세요
• 디지털 작업을 하되, 아날로그로 할 경우 편집부장에게 연락해주세요
16. KAIST 만화창작동아리 열정부
회지 원고를 내자!
회지는 넓은 의미에서 출판만화에 속합니다.
‘책’의 형태로 나온다는 것으로부터 고려해야 할 점이 생깁니다
• 재단할 때 잘리는 부분
• 책등 때문에 안 보이는 부분
다른 사람들과 함께 제작하기 때문에, 양식을 지켜야합니다.
• 4컷만화는 템플릿이 있기 때문에 크게 신경쓰지 않아도 됩니다
여기서는 열정부 회지를 포함해, 출판만화에 범용적으로 쓰이는
사항을 짚고 넘어가겠습니다.
17. KAIST 만화창작동아리 열정부
알고 갑시다! -용지 사이즈
숫자가 같으면 B가 더 큽니다 (A4 < B4, A5 < B5, …)
공책 사이즈가 대략 B5 정도 됩니다.
열정부 회지는 A4로 제작되다가, 최근에는 A5로 제작 중입니다.
국배판, 국판, 신국판 등도 있지만 할리데이를 통해 자체표준의
사악함을 맛본 이공계생인 우리는 국제표준 명칭을 애용합시다.
18. KAIST 만화창작동아리 열정부
알고 갑시다! -원고지
만화원고지
• 연필과 잉크펜을 통한 작업을 염두에 두고
만든 종이
• B5 원고용은 A4 사이즈,
A5 원고용은 B5 사이즈로 한 단계 큰 사이
즈
만화 제작에 필요한 것이 전부 표시되
어 있습니다
원고지의 각 부분을 이해하면 만화 제작
을 이해할 수 있게 됩니다
19. KAIST 만화창작동아리 열정부
어디까지 그려야 할까?
절대 인쇄가 될 리 없는 부분
인쇄가 될지 말지 모르니까 그려야 하는 부분
무조건 인쇄가 되는 부분
20. KAIST 만화창작동아리 열정부
잘릴 부분에 그리면 좋은 것
4컷만화의 경우,
그림이 페이지를 벗어나는 일이 드
뭅니다.
반면에,
그림이 페이지를 벗어나게 그리는
만화도 있습니다.
지면을 넓게 쓸 수 있고,
중요한 컷을 강조할 수 있고,
역동적인 연출이 가능해집니다.
21. KAIST 만화창작동아리 열정부
흔히 저지르는 실수
대충 그려놓고 까먹기
까먹고 채색 안 하기
이미지로 봤을 땐 별 거 아닌 실수가
인쇄하고 나면 돋보이게 됩니다
(우리는 완벽한 인쇄물만 봐 왔으니까요)
22. KAIST 만화창작동아리 열정부
잘릴 부분에 그리면 안 좋은 것
여전히 잘릴지도 모르는 부분입니다.
잘릴지도 모르는 영역에 중요한 것을 넣지 마세요.
• 중요한 연출 (내용 전개에 중요한 인물·소품 등)
• 대사 (★ ★중요★ ★)
26. KAIST 만화창작동아리 열정부
참고: 왜 잘리나요? -핀맞춤, 재단
알아둘 포인트
• 항상 같은 위치에 인쇄되지 않습니다.
• 종이 끝까지 출력하기는 어렵습니다.
흰 여백을 없애기 위해 재단이 필요!
재단
• 재단할 때도 1-2mm 정도의 오차가 생깁니다
• 재단선에서 3-5mm까지는 잘릴 가능성이 있다고 생각해주세요
27. KAIST 만화창작동아리 열정부
책등
무선제본의 경우,
책등 부분에 말려들어가서 안 보이는 부분이 생깁니다.
그 부분도 마찬가지로 대사, 중요한 그림이
들어가면 안 됩니다.
왼쪽 페이지, 오른쪽 페이지 구분이 정말
중요해집니다.
33. KAIST 만화창작동아리 열정부
개인지 원고를 내자! –돈은 동아리가 냅니다
열정부는 20페이지까지 B5 중철본 편집 및 인쇄비 지원을 해드
립니다
• 19세 이용가 가능합니다
단, 열정부의 지원을 받아 제작된 저작물임을 명시해야 합니다
• 보통 표지에 열정부 로고를 박습니다 (음 19금은 딴 데 넣어야겠네요)
3권은 본인 증정, 2권은 동아리 보관, 15권은 판매
수익금은 열정부에 귀속됩니다
15권을 전부 판매했을 경우
• 추가 인쇄 혹은 재판의 경우 해당 수익금은 본인이 가집니다
34. KAIST 만화창작동아리 열정부
알고 갑시다! -중철이란?
종이를 접은 뒤 스테이플러로 철
적은 페이지에 적당
무조건 4의 배수만 제작 가능
35. KAIST 만화창작동아리 열정부
중철의 특징
책등이 거의 없어 가운데 여백이 불필요합니다.
두 페이지를 합쳐서 인쇄합니다.
인쇄 순서가 페이지 순서와 다릅니다.
36. KAIST 만화창작동아리 열정부
개인지 원고를 내자! –절차
우선 회장단에 연락해서 일정, 수량, 페이지, 19금 여부를 전달합
니다
• 가끔 가다 까먹는 수가 있으니 계속 리마인드 해주세요
인쇄 마감을 확인합니다
• 소규모 행사의 경우 행사 공지에서 협력인쇄소를 찾아 볼 것
• 대규모 행사의 경우 프린트매니아 등 인쇄소 공지 확인
37. KAIST 만화창작동아리 열정부
개인지 원고를 내자! –절차
본인이 편집, 제출, 입금하는 경우
• 총무에게 영수증, 입금거래내역, 계좌번호를 전달합니다
• 인쇄비를 지원 받습니다
편집, 제출, 입금을 동아리에 맡기는 경우
• 제발 인쇄소 마감보다 일찍 끝내주세요
• 최악의 경우
‐ 목요일 밤부터 원고 기다려서 새벽에 원고 받고 철야로 편집해서 겨우 12시 전에
제출 입금 한 뒤에 인쇄소 전화 올까 봐 앉아서 졸다가 2시에 전화 와서 파일 고쳐
달라고 하면 3시에 다시 내고 기숙사 들어가서 5시 쯤 잡니다
‐ 그러고 나면 대사가 잘려 있습니다
• 편집 담당도 적절히 재촉해 주세요
38. KAIST 만화창작동아리 열정부
개인지 원고를 내자! –판매상세
가격은 작가 본인이 책정하되, 특별한 이유가 없으면 권당 인쇄
비를 100의 자리에서 올림 합니다.
• 보통 2,000원, 3,000원이 됩니다
39. KAIST 만화창작동아리 열정부
19금 원고를 내고 싶은데요
짧은 대답
• 개인지만 됩니다
긴 대답
• 회지의 경우 학교의 문화자치기금을 직접 수령해 제작하고 있고, 교내
학생(일부는 19세 미만이죠)에게 전시해야 하는 만큼, 19금 원고를 싣기
힘듭니다. 19금 책을 만들면 판매할 때 일일이 신분증을 확인해야 하는
데 그것도 현실적으로 불가능하고, 판매 부수도 현저히 떨어질 것이 명
확하기 때문에 회지에는 싣지 않습니다.
• 개인지의 경우, 교내 문화 등등과는 별개로 ‘만화를 만들고 싶은 사람에
게 동아리돈으로 만화를 만들 수 있게 한다’이기 때문에 제한이 없습니
다.
다음에 자세히 다루도록 하겠습니다
41. KAIST 만화창작동아리 열정부
출력 vs. 인쇄
출력은 우리가 익숙한 프린트 방식입니다.
• 보통 최대 A3까지 출력 가능합니다.
• 색 대비가 강해집니다.
• 페이지 수에 비례해 비용이 늘어나므로, 소량 인쇄에 적합합니다.
인쇄는 인쇄판을 먼저 제작해 찍어내는 프린트 방식입니다.
• A0까지 출력 가능하므로, 여러 페이지를 한 번에 인쇄한 뒤 재단합니다.
• 인쇄 위치와 색 표현이 정확합니다.
• 판을 제작하는 비용이 드므로, 대량 인쇄에 적합합니다.
42. KAIST 만화창작동아리 열정부
출력 vs. 인쇄
열정부는 2016년부터 출력소에 맡기는 방식으로 전환했습니다
• 그 전에는 서울에 있는 인쇄소에 가서 원고를 하곤 했는데
이제 원본을 직접 갖다 줄 필요가 없으니 그럴 일은 없죠
43. KAIST 만화창작동아리 열정부
망점(halftone)이란?
말 그대로 촘촘한 망으로 된 점입니다.
인쇄 방식에서는 그림의 명도를 판의 망점 변화로 표현합니다.
인쇄 방식 밖에 없던 시절,
만화의 명암은 망점에 의지했습니다.
망점톤의 탄생
출력 방식에서 망점을 쓰면
무아레가 일어날 수 있습니다.
44. KAIST 만화창작동아리 열정부
망점톤이란?
다양한 선수, 다양한 명도의 망점을 톤으로 만든 게 망점톤입니
다.
• 망점의 촘촘한 정도를 선수(lpi)로 표현합니다.
• 표현하고자 하는 명도를 퍼센트로 표현합니다.
보통 한두 개의 명도를 정해서 사용합니다.
- 톤 한두 개 - 먹칠
• 여러 명도를 쓰면 문제점
‐ 별로 여러 개를 쓴 티가 나지 않습니다.
‐ 50%보다 어두운 색은 인쇄하면 정말 어둡기 때문에 차이가 크지 않습니다.
‐ 사이사이를 그라데이션 톤이나 효과선·효과톤으로 채우는 게 더 예쁩니다.
• 먹칠을 효과적으로 써 봅시다
45. KAIST 만화창작동아리 열정부
망점톤 팁
해상도를 낮출수록 망점의 선수를 올리는 게 망점 티가 덜 납니
다.
• 600dpi - 60선, 300dpi - 85선, …
300dpi 미만은 망점을 안 쓰는 게 예쁩니다.
톤을 쓸 때는 칼로 톤을 긁어서 하이라이트 표현을 하기도 했습
니다.
• 클튜에선 지우개로 해 보세요
46. KAIST 만화창작동아리 열정부
대체 왜 클튜 기본은 350dpi인가?
이미지 인쇄에서 일반적으로 사용된 선수 중 하나가 175선입니
다.
350dpi로 만들어야 무아레가 생기지 않는다!
반면에 모조지(어두운 만화용지), 복사용지에는 150선이 이용됩
니다.
300dpi
현재는 용지에 따른 기술적 한계가 많이 극복되었다고 합니다.
47. KAIST 만화창작동아리 열정부
RGB와 CMYK
우리가 화면으로 보는 색은 RGB 기반입니다.
반면 인쇄물은 잉크·토너를 혼합하므로
CMYK 기반입니다.
이 점을 고려하지 않고 RGB로 작업한 이미
지를 CMYK로 뽑으면 의도하지 않은 결과가
나올 수 있습니다. (특히 파란색)
인쇄가 목적인 파일은 CMYK로 옮겨서 주세
요.
48. KAIST 만화창작동아리 열정부
표지 제작
표지 사이즈는
가로 : 재단여백 + 실제 책 크기 + 책등 + 실제 책 크기 + 재단여
백
세로 : 재단여백 + 실제 책 크기 + 재단여백
책등 높이 계산법
• 출력소 홈페이지에 적혀 있어요
재단여백
• 출력소 홈페이지에 적혀 있거나
내지 재단여백과 같습니다
49. KAIST 만화창작동아리 열정부
표지 제작
종이 뭐 쓰죠??
• 저도 잘 몰라요
• 샘플북 주문할게요
코팅할까요?
• 돈 있으면요
• 라미네이팅 유광 : 밝기가 높아지고 눈에 잘 띔
• 라미네이팅 무광 : 색 대비가 낮고 차분해짐
금박·은박은요?
• 돈 있으면 하세요…….
50. KAIST 만화창작동아리 열정부
중철 했더니
책이 붕 떠요
• (직각)압축 해 달라고 하세요
페이지가 들쭉날쭉 해요
• 재단 해 달라고 하세요
• 재단해서 대사가 잘릴 거 같으면 출력소에서 말리는 경우도 있습니다