The Spansion® Traveo™ microcontrollers are based on the ARM® Cortex®-R5 core and will deliver high performance, enhanced human-machine interfaces, high-security and advanced networking protocols tailored for a broad range of automotive applications such as electrification, body electronics, battery management, automotive cluster displays, HVAC and ADAS.
Spansion Traveo MCUs for Automotive Dashboards with HMI and Embedded 3D Graph...Spansion
Spansion® Traveo™ microcontroller family is aimed at rich human machine interface (HMI) in automotive dashboards. For the first time, Spansion is integrating its breakthrough HyperBus™ interface with its ARM® Cortex®-R5-based embedded Traveo MCU, enabling seamless connections with HyperBus memories, including Spansion HyperFlash™ memory, to provide customers design simplification and faster performance in automotive systems.
Abis Over IP/Abis Optimization on-site Workshopetkisizcom
Recognize new system architecture
Understand the dimensioning rules using the Abis planning tools
Activate the Abis over IP
Activate the Abis Optimization
Use the Performance Monitoring
Excelfore Ethernet AVB Software Architecture on ARM Cortex SOCs (White Paper)shrinathAcharya
AVB software architecture on ARM Cortex SOCs
Summary: Traditional clocking synchronization in networked A/V systems is done via elaborate means. In the automotive sector, the clock synchronization of displays and multi-channel audio in an infotainment platform is implemented using MOST, which is an isochronous environment. In the Pro-A/V area, the displays are synchronized through a combination of separate master clock control link and fixed delay compensation depending on the length of the control link. Synchronization thus has been a tedious and time consuming exercise. Standard Ethernet does not provide QoS and it is an asynchronous environment, although topologies exist to provide it today.
The Ethernet AVB Protocol (IEEE1722+IEEE1588 or 802.1AS) in one such standard that formally brings a QoS and synchronization implementation to Ethernet. By providing global time synchronization mechanism combined with a protocol of prioritization of streams as they pass through switches, Ethernet AVB offers an Isochronous environment similar to that of the MOST bus. Ethernet AVB protocol allows widespread proliferation of Ethernet standard in Automotive, Pro-AV and Pro-Audio systems.
Examples of Ethernet AVB application are:
1) Automotive ADAS in surround camera architecture
2) Automotive Infotainment End points
3) Pro A/V video wall projection system and
4) Multichannel Sound system for Automotive, Studio Environments.
Spansion Traveo MCUs for Automotive Dashboards with HMI and Embedded 3D Graph...Spansion
Spansion® Traveo™ microcontroller family is aimed at rich human machine interface (HMI) in automotive dashboards. For the first time, Spansion is integrating its breakthrough HyperBus™ interface with its ARM® Cortex®-R5-based embedded Traveo MCU, enabling seamless connections with HyperBus memories, including Spansion HyperFlash™ memory, to provide customers design simplification and faster performance in automotive systems.
Abis Over IP/Abis Optimization on-site Workshopetkisizcom
Recognize new system architecture
Understand the dimensioning rules using the Abis planning tools
Activate the Abis over IP
Activate the Abis Optimization
Use the Performance Monitoring
Excelfore Ethernet AVB Software Architecture on ARM Cortex SOCs (White Paper)shrinathAcharya
AVB software architecture on ARM Cortex SOCs
Summary: Traditional clocking synchronization in networked A/V systems is done via elaborate means. In the automotive sector, the clock synchronization of displays and multi-channel audio in an infotainment platform is implemented using MOST, which is an isochronous environment. In the Pro-A/V area, the displays are synchronized through a combination of separate master clock control link and fixed delay compensation depending on the length of the control link. Synchronization thus has been a tedious and time consuming exercise. Standard Ethernet does not provide QoS and it is an asynchronous environment, although topologies exist to provide it today.
The Ethernet AVB Protocol (IEEE1722+IEEE1588 or 802.1AS) in one such standard that formally brings a QoS and synchronization implementation to Ethernet. By providing global time synchronization mechanism combined with a protocol of prioritization of streams as they pass through switches, Ethernet AVB offers an Isochronous environment similar to that of the MOST bus. Ethernet AVB protocol allows widespread proliferation of Ethernet standard in Automotive, Pro-AV and Pro-Audio systems.
Examples of Ethernet AVB application are:
1) Automotive ADAS in surround camera architecture
2) Automotive Infotainment End points
3) Pro A/V video wall projection system and
4) Multichannel Sound system for Automotive, Studio Environments.
Microsens ms400860 m 28 port gigabit sfp 4 port 10g core industerial switch ...Ali Shoaee
MICROSENS MS400860M 28 port Gigabit SFP 4 Port 10G industrial Core Switch - InfoTechME
L2+ features provide better manageability, security, QoS, and performance
IEEE 802.3ah MAC Layer OAM and IEEE802.1ag Ethernet CFM
ITU-T Y.1731 Ethernet OAM Performance monitoring
802.3az Energy Efficient Ethernet standard
IPv6 and s-Flow supports
ITU-T G.8031 Ethernet Linear Protection and ITU-T G.8032v2 Ethernet Ring Protection Switching
AC (100..240 VAC) and DC (48 VDC) dual power input for power redundancy requirement
The next generation L2+ Carrier Ethernet Access Fiber switch from MICROSENS is a 20 port GBE SFP, 4 port Combo GBE (RJ-45/SFP) and 4 port 10 GBE (SFP+). The switches fulfill all current requirements of carrier switches and meets all necessary standards like IEEE 802.3/u/x/z/ab/ae.
It provides the ideal combination of affordability and capabilities for Carrier Access networking including IEEE802.3ah MAC Layer OAM, IEEE802.1ag Ethernet CFM, ITU-T Y.1731 Ethernet OAM Performance Monitoring, ITU-T G.8031 Ethernet Linear Protection, ITU-T G.8032v2 Ethernet Ring Protection Switching, Sync-Ethernet(by request) and IEEE1588v2 PTP for Carrier Ethernet management requirement.
It is suitable for Fiber To The Office (FTTO) and Carrier Ethernet applications and helps you create a more efficient, better-connected workforce based on Fiber optics. This switch can be managed through RS-232 serial port, or through Ethernet port using CLI or Web-based management. With the SNMP agent, the network administrator can manage the switch, configure and control in a friendly way. It supports AC and DC dual power input (100..240 VAC / 48 VDC) for power redundancy requirement.
MIPI DevCon 2021: MIPI I3C Signal Integrity Challenges on DDR5-based Server P...MIPI Alliance
Presented by Azusena Lupercio Ramirez, Juan Orozco and Nestor Hernandez Cruz, Intel Corporation
The MIPI I3C® protocol is first used in a server application for the DDR5 DIMM SPD function. MIPI I3C was defined for low capacitance applications, while DDR5 SPD exceeds by far the bus capacitance specification. This presentation covers the interoperability challenges of the dynamic push-pull and open-drain operating modes, on server applications with an in-depth analysis of the implications of long PCB traces, multiple DIMM routing branches, and multiple loads to the electrical and timing parameters.
Watch the full OnDemand webcast here: http://bit.ly/wc_80211-2012_update
The 802.11 protocol, or simply Wi-Fi as most users know it, is constantly under development. Users of 802.11 usually only notice the major changes, typically those that increase overall Wi-Fi performance, like 802.11a or 802.11n. But for every "public" change there are many background changes, some of which have pretty significant impacts, especially for device manufacturers, OEMs, and network engineers who must understand the nuances and the interactions of change to the protocol. With over twenty 802.11 specifications already ratified, and many more still in the development phase, it makes sense to occasionally "roll up" the changes into a single 802.11 specification. This is exactly what 802.11-2012 is all about.
802.11-2012 incorporates ten recently ratified 802.11 amendments into an overall 802.11 spec, making it much easier for engineers who are working with 802.11, especially those that may be new to Wi-Fi. Also, since many of the amendments include functional overlap, consolidation helps make potential design issues more obvious. Join us as we dissect the ten 802.11 specifications recently rolled into the 802.11-2012 specification update, focusing on their general applicability as well as their impact on other 802.11 specifications and features.
In this web seminar, we will cover:
- What’s in 802.11-2012
- Overall descriptions of each amendment
- Potential applications for each amendment
- Functional overlap, inconsistencies, or conflicts
What you will learn:
- How 802.11-2012 influences the overall WLAN market
- Which amendments are actively being implemented
- How WLAN analysis is impacted by these amendments
MIPI DevCon Taipei 2019: Study on the Influence of Random Jitter to the MIPI ...MIPI Alliance
HeeSoo Lee, SerDes/DDR product owner, and Jingshen Liu, R&D engineer, at Keysight Technologies Inc., focus on the influence of random jitters to the MIPI C-PHY℠ high speed timing, providing a reference for MIPI C-PHY designers and informing the future development of MIPI C-PHY.
This joint presentation from Ahmed Ella of Mixel and Serge Di Matteo of Renesas covers the deployment of MIPI D-PHY℠ in an autonomous driving use-case and the advantages of using MIPI specifications in functional safety applications.
Microsens ms400860 m 28 port gigabit sfp 4 port 10g core industerial switch ...Ali Shoaee
MICROSENS MS400860M 28 port Gigabit SFP 4 Port 10G industrial Core Switch - InfoTechME
L2+ features provide better manageability, security, QoS, and performance
IEEE 802.3ah MAC Layer OAM and IEEE802.1ag Ethernet CFM
ITU-T Y.1731 Ethernet OAM Performance monitoring
802.3az Energy Efficient Ethernet standard
IPv6 and s-Flow supports
ITU-T G.8031 Ethernet Linear Protection and ITU-T G.8032v2 Ethernet Ring Protection Switching
AC (100..240 VAC) and DC (48 VDC) dual power input for power redundancy requirement
The next generation L2+ Carrier Ethernet Access Fiber switch from MICROSENS is a 20 port GBE SFP, 4 port Combo GBE (RJ-45/SFP) and 4 port 10 GBE (SFP+). The switches fulfill all current requirements of carrier switches and meets all necessary standards like IEEE 802.3/u/x/z/ab/ae.
It provides the ideal combination of affordability and capabilities for Carrier Access networking including IEEE802.3ah MAC Layer OAM, IEEE802.1ag Ethernet CFM, ITU-T Y.1731 Ethernet OAM Performance Monitoring, ITU-T G.8031 Ethernet Linear Protection, ITU-T G.8032v2 Ethernet Ring Protection Switching, Sync-Ethernet(by request) and IEEE1588v2 PTP for Carrier Ethernet management requirement.
It is suitable for Fiber To The Office (FTTO) and Carrier Ethernet applications and helps you create a more efficient, better-connected workforce based on Fiber optics. This switch can be managed through RS-232 serial port, or through Ethernet port using CLI or Web-based management. With the SNMP agent, the network administrator can manage the switch, configure and control in a friendly way. It supports AC and DC dual power input (100..240 VAC / 48 VDC) for power redundancy requirement.
MIPI DevCon 2021: MIPI I3C Signal Integrity Challenges on DDR5-based Server P...MIPI Alliance
Presented by Azusena Lupercio Ramirez, Juan Orozco and Nestor Hernandez Cruz, Intel Corporation
The MIPI I3C® protocol is first used in a server application for the DDR5 DIMM SPD function. MIPI I3C was defined for low capacitance applications, while DDR5 SPD exceeds by far the bus capacitance specification. This presentation covers the interoperability challenges of the dynamic push-pull and open-drain operating modes, on server applications with an in-depth analysis of the implications of long PCB traces, multiple DIMM routing branches, and multiple loads to the electrical and timing parameters.
Watch the full OnDemand webcast here: http://bit.ly/wc_80211-2012_update
The 802.11 protocol, or simply Wi-Fi as most users know it, is constantly under development. Users of 802.11 usually only notice the major changes, typically those that increase overall Wi-Fi performance, like 802.11a or 802.11n. But for every "public" change there are many background changes, some of which have pretty significant impacts, especially for device manufacturers, OEMs, and network engineers who must understand the nuances and the interactions of change to the protocol. With over twenty 802.11 specifications already ratified, and many more still in the development phase, it makes sense to occasionally "roll up" the changes into a single 802.11 specification. This is exactly what 802.11-2012 is all about.
802.11-2012 incorporates ten recently ratified 802.11 amendments into an overall 802.11 spec, making it much easier for engineers who are working with 802.11, especially those that may be new to Wi-Fi. Also, since many of the amendments include functional overlap, consolidation helps make potential design issues more obvious. Join us as we dissect the ten 802.11 specifications recently rolled into the 802.11-2012 specification update, focusing on their general applicability as well as their impact on other 802.11 specifications and features.
In this web seminar, we will cover:
- What’s in 802.11-2012
- Overall descriptions of each amendment
- Potential applications for each amendment
- Functional overlap, inconsistencies, or conflicts
What you will learn:
- How 802.11-2012 influences the overall WLAN market
- Which amendments are actively being implemented
- How WLAN analysis is impacted by these amendments
MIPI DevCon Taipei 2019: Study on the Influence of Random Jitter to the MIPI ...MIPI Alliance
HeeSoo Lee, SerDes/DDR product owner, and Jingshen Liu, R&D engineer, at Keysight Technologies Inc., focus on the influence of random jitters to the MIPI C-PHY℠ high speed timing, providing a reference for MIPI C-PHY designers and informing the future development of MIPI C-PHY.
This joint presentation from Ahmed Ella of Mixel and Serge Di Matteo of Renesas covers the deployment of MIPI D-PHY℠ in an autonomous driving use-case and the advantages of using MIPI specifications in functional safety applications.
Our Customer (an Automotive Tier-I Supplier) encountered a major roadblock during software porting.Due to limited on-chip memory (RAM and ROM) of DsPIC 30F4011 platform, it became imperative for the customer to port highly-optimized embedded software to the EPS system.
Find out how a re-usable SAE J1939 compliant stack, best suited for commercial vehicles, was integrated with the EPS system to resolve the issue
Automotive Challenges Addressed by Standard and Non-Standard Based IPCAST, Inc.
IP cores from CAST for automotive bus controllers and video applications: CAN FD, LIN, SENT, Ethernet, HDR/WDR, and more. Visit http://www.cast-inc.com for more info.
Fast evaluation, demonstration and development for Your microcontroller based sensor or detector design!
Quickly evaluate, demonstrateand develop intelligent sensor designs with Detect it! Built on a True Low Power RL78 MCU with fast wake-up and dedicated analog features, it includes 4 different sensor boards and full reference source code.
Signal-Oriented ECUs in a Centralized Service-Oriented Architecture: Scalabil...RealTime-at-Work (RTaW)
The industry is quickly moving away from a function/signal-oriented architecture towards Service-Oriented Architectures (SOA). To carry-over legacy signal-oriented ECUs during the transition phase, Volvo Cars has developed a layered software (SW) architecture based on the concepts of "device proxys" (i.e., one per legacy ECU), signal real-time database and service interface. This architecture, executing on the central computer on the TSN backbone, provides a clear separation of concerns between its components with a reduced additional complexity.
In this presentation, we will review the main challenges faced in the integration of signal-oriented ECUs into SOA, and present the solutions explored at Volvo with a focus on layered SW architecture in the centralized E/E architecture and its 3 core components:
o Device Proxies
o Signal DataBase
o Service Interface
We then report on the performances of this architecture in terms of latencies and conclude on the maximum number of signal-oriented frames and legacy ECUs that can be handled. The performance evaluation is conducted by simulation, with sensitivity analysis to identify the performance bottlenecks. The E/E architecture under study is a prototype TSN-based central computing architecture targeted at next-generation models.
The main questions that will be discussed throughout the presentation are 1) how to efficiently handle signal to service conversion? 2) The performance and the scalability of the SW architecture proposed and 3) the suitability of SOME/IP as the SOA protocol.
Lead embedded this a startup company start in June 2021
1.LEAD EMBEDDED SPECIALIZES IN SOFT WARE DEVELOPMEAT FOR CAN EOL TOOLS USING IN UDS AND OBD2 PROTOCOLS IN AUTOMOTIVE VEHICLES .
2.WE ARE SPECIALIZES IN CONTROL OF BLDC AND PMSM MOTORS USING FOC .
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
Generating a custom Ruby SDK for your web service or Rails API using Smithyg2nightmarescribd
Have you ever wanted a Ruby client API to communicate with your web service? Smithy is a protocol-agnostic language for defining services and SDKs. Smithy Ruby is an implementation of Smithy that generates a Ruby SDK using a Smithy model. In this talk, we will explore Smithy and Smithy Ruby to learn how to generate custom feature-rich SDKs that can communicate with any web service, such as a Rails JSON API.
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...Ramesh Iyer
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.