2. Team Members :
• Avdhesh Kumar Meena
• Ghanshyam
• Harimohan
• Nidhi
• Parvinder
• Shubham
3. CONTENTS
1. Automatic Street Lights using LDR
2. Micro-controller control kit
AT89C52
ULN 2003
Relay
Crystal Oscillator
3. Solar energy
4. Inverter
5. Bluetooth based control
6. Smart home appliance
4. 1.Automatic Street Light Control Using LDR
LDR- Light Dependent Resistor/Photo Resistor
LDR is made of a high resistance semiconductor (MΩ).
Applications:
Street light, Camera light meter,
Solar street lamps and solar road
studs, etc
7. AT89C52
This is an 8-bit microcontroller
it can be erased and programmed to a maximum of
1000 times.
• The pin configuration of AT89C52 is exactly similar to
that of AT89C51 .
AT89C52 AT89C51
RAM 256 Bytes 128 Bytes
Flash 8 KB 4 KB
Number of
Timers/Counters
3 (16-bit each) 2 (16-bit each)
Number of Interrupt
Sources
8 6
8. ULN2003A:
The ULN2003A is an array of seven
NPN Darlington transistors capable of
500 mA, 50 V output.
ULN2003 is a high voltage and high current
Darlington array IC.
It contains seven open collector darlington
pairs with common emitters.
9. Relays
A relay is electro mechanical device that
is actuated by an electrical current.
The current flowing in one circuit causes
the opening or closing circuit.
which is used for switching between
5 volt circuits and 220/ 120 Volt AC
circuits.
10. Crystal Oscillator
A crystal oscillator is an
electronic oscillator circuit that uses the
mechanical resonance of a
vibrating crystal of piezoelectric material
to create an electrical signal with a
precise frequency.
12. 3. Solar Energy
What is Solar Energy?
Solar Energy defination : Energy from the sun.
Electric Energy:
the power of the sun to
produce electricity through solar
cells, that’s known as Photovoltics
(PV).
15. 4 .Inverter
What is inverter ?
Inverter is an electronic device that changes
DC to AC.
Inverter doesn’t produce any power;
The power is provided by the DC source.
19. 6.Smart home appliance
Use multiple power source ,
controlling help by multiple electronics
devices and wireless controlling used
Smart Home Appliances and less power
losses .
22. CONCLUSION
• Necessity of automation
• Save energy.
• Solar Energy being a renewable source
• People can control their basic home
electrical devices via these Home
Automation devices and Mobile.