SL011 - Drainage Plan
•
1 like•471 views
The drainage plan shows the layout of pipes and manholes (FMs) for draining a science building addition. Soil pipes from the building drop down into a new manhole (FM3). A 110mm cast iron soil pipe runs along the underside of the first floor and into FM3. Rainwater pipes also drain into FM3. From FM3, foul water is drained through existing pipes. New manholes will be dug to connect to the existing drainage system and match the depths of existing falls. The surrounding area will be tarmaced.
Report
Share
Report
Share
Download to read offline
Recommended
Lot12A Ardeen st
This document contains architectural plans for a proposed two-storey residential building, including:
- A site plan showing the layout of the building on the lot, retaining walls, fencing, and other site features.
- Floor plans of the ground floor and first floor showing the layout and dimensions of rooms.
- An elevation of the south side of the building.
- A detail of a typical retaining wall to be constructed.
Pavilion FS[1] (TO SEND)
This document provides plans for the slab, ground floor, roof, and external works for a pavilion structure. It includes:
- A slab plan showing footings, thickening, and soak wells at a scale of 1:100.
- A ground floor plan at 1:100 scale showing layout of rooms, doors, windows, and details.
- A roof plan at 1:100 scale showing roof pitch, gutters, and materials.
- An external works plan at 1:100 scale showing fences, paving, and drainage.
Lot 280 Bogdanich way
The document provides plans and details for a proposed residential development including a house, garage, alfresco area, and pool. It includes a site plan at a scale of 1:100 showing the layout of the property and location of structures, elevations of all sides of the building, a section detail, and floor plans of the buildings. Dimensions and materials are specified. The documents are intended to support a planning application for the development.
It’s all about the tank
The document provides information and guidelines for inspecting septic tanks and systems from 1989 to present day. It discusses locating and accessing tanks, using cameras to view internal components, and tools for examining scum, sludge, and effluent levels. Standards and specifications are presented for various precast concrete tank manufacturers from the 1980s to 1990s. Key parts of the tank like the inlet, outlet, and effluent screen are described. Signs of deterioration, improper venting, distribution boxes, and seepage pits are also covered. The overall message is the importance of thorough inspection and documentation to understand how the septic system is functioning.
plan
The document is a floor plan for a school building. It includes four classrooms ranging from 525 to 600 square feet. It also shows an office, storage areas, and toilets. Dimensions and notes provide additional information about room sizes, partitions, doors, and equipment.
A-100-A100.00
This document contains floor plans and notes for an existing home renovation project. The first floor plan shows the existing layout including an entry, living room, dining area, two bedrooms, bathroom, and office space. The office space is proposed to be renovated and converted to a one-car garage. Plumbing notes indicate new fixtures will be installed in the bathroom and connected to existing waste piping. The partial basement/cellar plan shows an open space used for accessory storage and not for cooking, living, or sleeping.
TIVOILI A3 ELEVATIONS NOV.13.15
This document provides details for an addition and renovation project including dimensions, notes, and specifications. It specifies that the underfloor ventilation area for the new addition must be at least 14.5 square feet to meet code requirements for methane zones. It includes dimensions for the existing house and new addition, notes on roofing materials, and indicates guardrails and stairs will be added. Skylights, vents, and a crawl space access are noted for the new addition.
Proposed mansionette design gf
This document contains an itemized list of electrical components and their specifications, including switches, sockets, a consumer unit, cooker control unit, and TV outlet from brands like Crabtree and Fierland. It also notes the project is for a proposed residential development in Nairobi, Kenya with an electrical plan for the ground floor.
Recommended
Lot12A Ardeen st
This document contains architectural plans for a proposed two-storey residential building, including:
- A site plan showing the layout of the building on the lot, retaining walls, fencing, and other site features.
- Floor plans of the ground floor and first floor showing the layout and dimensions of rooms.
- An elevation of the south side of the building.
- A detail of a typical retaining wall to be constructed.
Pavilion FS[1] (TO SEND)
This document provides plans for the slab, ground floor, roof, and external works for a pavilion structure. It includes:
- A slab plan showing footings, thickening, and soak wells at a scale of 1:100.
- A ground floor plan at 1:100 scale showing layout of rooms, doors, windows, and details.
- A roof plan at 1:100 scale showing roof pitch, gutters, and materials.
- An external works plan at 1:100 scale showing fences, paving, and drainage.
Lot 280 Bogdanich way
The document provides plans and details for a proposed residential development including a house, garage, alfresco area, and pool. It includes a site plan at a scale of 1:100 showing the layout of the property and location of structures, elevations of all sides of the building, a section detail, and floor plans of the buildings. Dimensions and materials are specified. The documents are intended to support a planning application for the development.
It’s all about the tank
The document provides information and guidelines for inspecting septic tanks and systems from 1989 to present day. It discusses locating and accessing tanks, using cameras to view internal components, and tools for examining scum, sludge, and effluent levels. Standards and specifications are presented for various precast concrete tank manufacturers from the 1980s to 1990s. Key parts of the tank like the inlet, outlet, and effluent screen are described. Signs of deterioration, improper venting, distribution boxes, and seepage pits are also covered. The overall message is the importance of thorough inspection and documentation to understand how the septic system is functioning.
plan
The document is a floor plan for a school building. It includes four classrooms ranging from 525 to 600 square feet. It also shows an office, storage areas, and toilets. Dimensions and notes provide additional information about room sizes, partitions, doors, and equipment.
A-100-A100.00
This document contains floor plans and notes for an existing home renovation project. The first floor plan shows the existing layout including an entry, living room, dining area, two bedrooms, bathroom, and office space. The office space is proposed to be renovated and converted to a one-car garage. Plumbing notes indicate new fixtures will be installed in the bathroom and connected to existing waste piping. The partial basement/cellar plan shows an open space used for accessory storage and not for cooking, living, or sleeping.
TIVOILI A3 ELEVATIONS NOV.13.15
This document provides details for an addition and renovation project including dimensions, notes, and specifications. It specifies that the underfloor ventilation area for the new addition must be at least 14.5 square feet to meet code requirements for methane zones. It includes dimensions for the existing house and new addition, notes on roofing materials, and indicates guardrails and stairs will be added. Skylights, vents, and a crawl space access are noted for the new addition.
Proposed mansionette design gf
This document contains an itemized list of electrical components and their specifications, including switches, sockets, a consumer unit, cooker control unit, and TV outlet from brands like Crabtree and Fierland. It also notes the project is for a proposed residential development in Nairobi, Kenya with an electrical plan for the ground floor.
India’s !st & only Hollywood benchmarked studio facility
Introducing India’s first and only Hollywood benchmarked studio facility
Special Mentions:
“The newly built Reliance Media Works Studio... woah! Stunning! I've never seen such opulence and systems in a film studio..”- Referenced from Twitter handle of Mr. Amitabh Bachchan.
"After what I have seen here, there is a possibility of me coming back to make a movie here, after all"- Oliver Stone, as said to The Economic Times, India.
Kwanokeng Oxman Fuel Depot Expansion
The document contains drawings and plans for proposed upgrades to the Kwanokeng Fuel Depot in Panda, Botswana. It includes a location plan showing the area around Panda, Matenga, Francistown and Kasane. It also includes a site plan, floor plans, sections and elevations for an office building and service building on the property. The drawings provide details of the proposed construction including dimensions, materials and structural elements.
sem 2.5 measured drawings
This document provides a floor plan layout and details for an office building. It includes labels for various rooms, areas, and levels. It also includes door schedules, window details, ornament dimensions, and other architectural information. Key information presented includes layouts for the ground floor, first floor, and roof levels. Dimensions and other specifications are provided for doors, windows, and architectural features.
Lab 4.PDF
This document contains a technical drawing with dimensions and tolerances for a 3D part with three equally spaced webs. Key details include a 5 inch bolt circle, various radii including 1/8 inch and 1/16 inch fillets, and a note specifying 1/8 inch fillets around the base and everywhere else unless otherwise noted. The drawing also contains title block information and notes for dimensions, tolerances, and proprietary restrictions.
House drawing
The document contains plans for a proposed residential building including dimensions for foundations, walls, roofing, and other structural elements. Key details include laying a 75mm concrete slab over 150mm of compacted hardcore on a 6mm rhino board foundation wall. The roof will have 15 degree pitch with asbestos sheets and trusses installed by a specialist. Interior walls will use 38x38mm wood beams at 400mm spacing and a rhino board ceiling.
CHECK LIST FOR ( HVAC ) WORK & SHOP DRAWING
This document contains a checklist for HVAC work and shop drawings. It lists over 40 items to check, including pipe and duct supports, insulation, equipment installation, wiring, labeling, access points, coordination with other building systems, and best practices for layout and installation. The checklist aims to ensure all critical components are addressed for a complete and code-compliant HVAC system design and installation. Contact information is provided for any required clarification.
Hydrant bags
This document provides information about connecting fire trucks to hydrants and the location of necessary equipment. It discusses the types of trucks that most commonly need hydrant connections, the components of a hydrant bag and their uses. Specific compartments on Engine 28, Engine 30 and Tower 3 are highlighted that contain the hydrant bags, steamer adapters and basic hand tools like halligans and axes. Members are reminded to know where all equipment is located on all trucks.
Vietnam Auto Expo 2016
ベトナムの展示会運営会社C.I.S Vietnam Advertising & Exhibition JSCが、ベトナム商工省傘下のIndustry Policy & Strategy Institute（工業政策戦略研究院）及びVietnam Society of Automotive Engineers（ベトナム自動車技術会）と共催して、第13回目の自動車、オートバイ、部品、アクセサリー、整備サービス、修理器具に関する展示会International Exhibition on Automobile and Supporting Industries 2016(Vietnam Auto Expo 2016、ベトナム・オート・エキスポ2016)を、2016年6月8日（水）～6月11日（土）、Hanoi（ハノイ）のHanoi International Center for Exhibition （ICE、ハノイ国際展示センター）で開催します。
2015年6月17日（水）～20日（土）の4日間開催されたVietnam Auto Expo 2015には、会場Vietnam Exhibition and Fair Centre（ベトナム・エキシビション・アンド・フェア・センター）9，000平方メートルのスペースに142社・団体以上が出展し、来場者数は72,000人でした。出展者の13％が乗用車、40％がバス・トラック・特殊車両、22％がオートバイ・スクーター、17％がパーツ・アクセサリーなど関連商品、8％が整備やメンテンナスなどサービスを展示しました。
Vietnam Automobile Manufactures Association（VAMA、ベトナム自動車工業会）によると、2014年の新車販売台数は前年比38.2％増の133,588台、2015年10月までは、前年比52.7.％増の185,811台と好調です。
一方、国内の完成車生産や自動車部品の現地生産の情勢は、2018年以降、大きく変貌しそうです。ベトナムは自動車産業保護のため、ASEAN（東南アジア諸国連合）域内からの完成車輸入の関税は60％ですが、ASEAN物品貿易協定に基づき、この高い輸入関税は2018年までに撤廃される見込みです。この結果、タイやインドネシアからの輸入車が増加し、国内の完成車生産は減少するとの観測があります。
本展示会の御出展は、ベトナム、特にハノイの自動車・オートバイ・関連商品及びアフターマーケットにご興味のある企業様にとって、貴社製品やサービスに関心のある企業経営者や輸入代理店と出会い、ネットワークを拡げる良い機会となります。
Drainage systerm
This document contains diagrams and drawings of a residential drainage system. It includes:
1) Multiple views showing the layout of pipes for the main water supply, distributing water throughout the home, and removing waste water.
2) A legend defining the different pipe types.
3) Details of the connections between pipes, chambers, tanks, and other system components.
Hydrant flushing programs
This document discusses hydrant flushing programs. It explains that flushing programs help maintain water quality by removing sediment, restoring chlorine residuals, and preventing issues like nitrification. The document outlines a four-step approach to flushing programs: determining if flushing is needed, planning the program, collecting data during flushing, and evaluating the results. It also describes different flushing methods like conventional, unidirectional, and continuous blow-off flushing and considerations for implementing an effective flushing program.
EFAC's toilet block
This document provides details of a latrine and bathroom block project for a village in Panvel, including a schematic diagram, location information, bill of materials, estimated costs, and specifications. The project involves constructing two 4' x 4' x 8' latrine blocks and two 4' x 4' x 8' bathroom blocks with materials like FRP doors and frames, bison board walls, water tanks, toilets, taps, pipes, tiles, and other bathroom accessories. The total estimated cost for the project is Rs. 1,02,625.
In-Place Pipe Support Load Testing and Hanger Surveys_Part of a Best in Class...
- A best-in-class piping fitness-for-service program involves regular visual inspections of pipe supports and hangers, as well as in-situ load testing of suspect supports to determine actual load values.
- In-situ load testing uses hydraulic tools to unload pipe hangers without disconnecting them from piping, allowing testing of critical online systems. It measures the actual load a hanger is supporting.
- Proper pipe support maintenance and load testing is important for the safe and reliable operation of piping systems, as required by various codes and standards, especially for high-risk creep-exposed lines. Load test data improves the accuracy of creep stress analyses.
2 louis p. pollono - 4046169- pipe support for use in a nuclear system
The pipe support consists of a pipe transition member welded into a vertical piping run to provide support. The transition member has the same inside diameter as the piping but its outside diameter increases along its length to form a triangular cross-section, with a ledge at the widest point. Load-bearing insulation, clamps, and hanger rods connect to this ledge to transfer the piping load to constant support hangers while preventing thermal stresses on the piping.
Ukuran hanger road
This document provides guidelines for typical hanger spacing and rod diameters for horizontal steel, PVC, and copper piping based on nominal pipe size. It lists the maximum recommended spacing for different pipe materials and sizes, ranging from 3/8-inch to 16-inch nominal pipe. Common hanger types are also illustrated, including clevis hangers for 1/2-30 inch pipe and pipe clamps for 1/2-36 inch pipe. The information is intended as a reference for proper pipe support and not as a performance guarantee, and all local codes must be followed.
Prof. thomas pogge
Intellectual Property Rights and Access to
Essential Medicines
Thomas Pogge
Professor of Political Science, Columbia University
Centre for Applied Philosophy and Public Ethics, Australian National University
Centre for the Study of Mind in Nature, University of Oslo
Pipe Insulation System
This document provides details for insulating pipe systems. It specifies using mineral fiber insulation conforming to ASTM C 547 Class 1, with a factory applied FSK/kraft paper laminate jacket. The insulation will be used on cold water, hot water, and chilled water pipes as described. Half wood sections will be inserted into the insulation and taped with FSK tape to maintain the vapor barrier. 360 degree type 40 pipe protection shields 12 inches long will be used, along with U-bolt or hanger supports conforming to MSS SP 58-69 Type 24 standards.
Chapter9 Hydrant Bradburn
Fire hydrants have several key components and uses. The upper section includes outlets that connect to hoses for firefighting. The lower section connects to water mains and contains a main valve. There are different types of hydrants like dry barrel for freezing climates and wet barrel that are always full of water. Proper installation is important, making sure the hydrant has good footing and drainage, is visible to crews, and can be easily accessed and operated during an emergency. Routine maintenance like inspections helps ensure hydrants remain functional.
F3 Subsoil drainage and installation
This document discusses various aspects of designing and installing subsoil drainage systems. It provides guidance on determining pipe sizing and placement, choosing the proper filter material, and common installation mistakes to avoid. Key points covered include designing the system from the discharge point upward with uniform fall, using washed sand rather than gravel as the filter material to prevent particle migration, and ensuring proper trench grading and slope.
20100514 pipe arch presentation to iem may 2010
This presentation provides information on the construction of a pipe arch tunnel project in Malaysia. It discusses the general project details including the tunnel length and location crossing a highway. It then summarizes the chronology of construction including building a triple cell drainage culvert, demolishing an existing box culvert, and constructing the twin pipe arch tunnels under the highway. The presentation describes the pipe arch tunnel concept and construction steps. It also details a catastrophe that occurred during construction where a damaged section of pipe had to be retrieved.
Pipe shields for beginners
This presentation will give you an introduction to Pipe Shields, Inc. and its unique line of pre-insulated pipe supports, slides, guides and anchors that it developed and patented over its 40 year history. It will cover various designs, commercial applications (chilled and heated water lines, HVAC systems and low pressure steam lines), installation and maintenance procedures and the benefits of using pre-insulated pipe supports (vs. doing insulation in the field). This presentation will be delivered by Albert Dizon, General Manager of Pipe Shields, who has been working with pre-insulated pipe supports for 30+ years. Join us and receive some of his experience and wisdom!
Pipe Support Field Inspection, Installation & Maintenance
The document is about a webinar on pipe support field inspection, installation, and maintenance presented by Jerry Godinaer. It provides information on inspecting, installing, and maintaining different types of pipe supports including variable and constant spring hangers, restraint devices, pipe shoes, slide plates, and hardware components. It discusses guidelines for on-site surveys, what to inspect for existing supports, and criteria for adjusting or replacing supports if needed.
804 query-short-spools-support
This document provides guidelines for supporting piping systems that use flexible grooved couplings. It discusses the differences between supporting rigid versus flexible coupling systems. For flexible systems that allow movement, it recommends maximum hanger spacing distances between supports for various pipe sizes and whether full linear movement is or is not required. No pipe section should be left unsupported between any two couplings. Supports should be attached to adjoining pipes and equipment only, not directly to the couplings.
More Related Content
What's hot
India’s !st & only Hollywood benchmarked studio facility
Introducing India’s first and only Hollywood benchmarked studio facility
Special Mentions:
“The newly built Reliance Media Works Studio... woah! Stunning! I've never seen such opulence and systems in a film studio..”- Referenced from Twitter handle of Mr. Amitabh Bachchan.
"After what I have seen here, there is a possibility of me coming back to make a movie here, after all"- Oliver Stone, as said to The Economic Times, India.
Kwanokeng Oxman Fuel Depot Expansion
The document contains drawings and plans for proposed upgrades to the Kwanokeng Fuel Depot in Panda, Botswana. It includes a location plan showing the area around Panda, Matenga, Francistown and Kasane. It also includes a site plan, floor plans, sections and elevations for an office building and service building on the property. The drawings provide details of the proposed construction including dimensions, materials and structural elements.
sem 2.5 measured drawings
This document provides a floor plan layout and details for an office building. It includes labels for various rooms, areas, and levels. It also includes door schedules, window details, ornament dimensions, and other architectural information. Key information presented includes layouts for the ground floor, first floor, and roof levels. Dimensions and other specifications are provided for doors, windows, and architectural features.
Lab 4.PDF
This document contains a technical drawing with dimensions and tolerances for a 3D part with three equally spaced webs. Key details include a 5 inch bolt circle, various radii including 1/8 inch and 1/16 inch fillets, and a note specifying 1/8 inch fillets around the base and everywhere else unless otherwise noted. The drawing also contains title block information and notes for dimensions, tolerances, and proprietary restrictions.
House drawing
The document contains plans for a proposed residential building including dimensions for foundations, walls, roofing, and other structural elements. Key details include laying a 75mm concrete slab over 150mm of compacted hardcore on a 6mm rhino board foundation wall. The roof will have 15 degree pitch with asbestos sheets and trusses installed by a specialist. Interior walls will use 38x38mm wood beams at 400mm spacing and a rhino board ceiling.
CHECK LIST FOR ( HVAC ) WORK & SHOP DRAWING
This document contains a checklist for HVAC work and shop drawings. It lists over 40 items to check, including pipe and duct supports, insulation, equipment installation, wiring, labeling, access points, coordination with other building systems, and best practices for layout and installation. The checklist aims to ensure all critical components are addressed for a complete and code-compliant HVAC system design and installation. Contact information is provided for any required clarification.
What's hot (6)
India’s !st & only Hollywood benchmarked studio facility
India’s !st & only Hollywood benchmarked studio facility
Viewers also liked
Hydrant bags
This document provides information about connecting fire trucks to hydrants and the location of necessary equipment. It discusses the types of trucks that most commonly need hydrant connections, the components of a hydrant bag and their uses. Specific compartments on Engine 28, Engine 30 and Tower 3 are highlighted that contain the hydrant bags, steamer adapters and basic hand tools like halligans and axes. Members are reminded to know where all equipment is located on all trucks.
Vietnam Auto Expo 2016
ベトナムの展示会運営会社C.I.S Vietnam Advertising & Exhibition JSCが、ベトナム商工省傘下のIndustry Policy & Strategy Institute（工業政策戦略研究院）及びVietnam Society of Automotive Engineers（ベトナム自動車技術会）と共催して、第13回目の自動車、オートバイ、部品、アクセサリー、整備サービス、修理器具に関する展示会International Exhibition on Automobile and Supporting Industries 2016(Vietnam Auto Expo 2016、ベトナム・オート・エキスポ2016)を、2016年6月8日（水）～6月11日（土）、Hanoi（ハノイ）のHanoi International Center for Exhibition （ICE、ハノイ国際展示センター）で開催します。
2015年6月17日（水）～20日（土）の4日間開催されたVietnam Auto Expo 2015には、会場Vietnam Exhibition and Fair Centre（ベトナム・エキシビション・アンド・フェア・センター）9，000平方メートルのスペースに142社・団体以上が出展し、来場者数は72,000人でした。出展者の13％が乗用車、40％がバス・トラック・特殊車両、22％がオートバイ・スクーター、17％がパーツ・アクセサリーなど関連商品、8％が整備やメンテンナスなどサービスを展示しました。
Vietnam Automobile Manufactures Association（VAMA、ベトナム自動車工業会）によると、2014年の新車販売台数は前年比38.2％増の133,588台、2015年10月までは、前年比52.7.％増の185,811台と好調です。
一方、国内の完成車生産や自動車部品の現地生産の情勢は、2018年以降、大きく変貌しそうです。ベトナムは自動車産業保護のため、ASEAN（東南アジア諸国連合）域内からの完成車輸入の関税は60％ですが、ASEAN物品貿易協定に基づき、この高い輸入関税は2018年までに撤廃される見込みです。この結果、タイやインドネシアからの輸入車が増加し、国内の完成車生産は減少するとの観測があります。
本展示会の御出展は、ベトナム、特にハノイの自動車・オートバイ・関連商品及びアフターマーケットにご興味のある企業様にとって、貴社製品やサービスに関心のある企業経営者や輸入代理店と出会い、ネットワークを拡げる良い機会となります。
Drainage systerm
This document contains diagrams and drawings of a residential drainage system. It includes:
1) Multiple views showing the layout of pipes for the main water supply, distributing water throughout the home, and removing waste water.
2) A legend defining the different pipe types.
3) Details of the connections between pipes, chambers, tanks, and other system components.
Hydrant flushing programs
This document discusses hydrant flushing programs. It explains that flushing programs help maintain water quality by removing sediment, restoring chlorine residuals, and preventing issues like nitrification. The document outlines a four-step approach to flushing programs: determining if flushing is needed, planning the program, collecting data during flushing, and evaluating the results. It also describes different flushing methods like conventional, unidirectional, and continuous blow-off flushing and considerations for implementing an effective flushing program.
EFAC's toilet block
This document provides details of a latrine and bathroom block project for a village in Panvel, including a schematic diagram, location information, bill of materials, estimated costs, and specifications. The project involves constructing two 4' x 4' x 8' latrine blocks and two 4' x 4' x 8' bathroom blocks with materials like FRP doors and frames, bison board walls, water tanks, toilets, taps, pipes, tiles, and other bathroom accessories. The total estimated cost for the project is Rs. 1,02,625.
In-Place Pipe Support Load Testing and Hanger Surveys_Part of a Best in Class...
- A best-in-class piping fitness-for-service program involves regular visual inspections of pipe supports and hangers, as well as in-situ load testing of suspect supports to determine actual load values.
- In-situ load testing uses hydraulic tools to unload pipe hangers without disconnecting them from piping, allowing testing of critical online systems. It measures the actual load a hanger is supporting.
- Proper pipe support maintenance and load testing is important for the safe and reliable operation of piping systems, as required by various codes and standards, especially for high-risk creep-exposed lines. Load test data improves the accuracy of creep stress analyses.
2 louis p. pollono - 4046169- pipe support for use in a nuclear system
The pipe support consists of a pipe transition member welded into a vertical piping run to provide support. The transition member has the same inside diameter as the piping but its outside diameter increases along its length to form a triangular cross-section, with a ledge at the widest point. Load-bearing insulation, clamps, and hanger rods connect to this ledge to transfer the piping load to constant support hangers while preventing thermal stresses on the piping.
Ukuran hanger road
This document provides guidelines for typical hanger spacing and rod diameters for horizontal steel, PVC, and copper piping based on nominal pipe size. It lists the maximum recommended spacing for different pipe materials and sizes, ranging from 3/8-inch to 16-inch nominal pipe. Common hanger types are also illustrated, including clevis hangers for 1/2-30 inch pipe and pipe clamps for 1/2-36 inch pipe. The information is intended as a reference for proper pipe support and not as a performance guarantee, and all local codes must be followed.
Prof. thomas pogge
Intellectual Property Rights and Access to
Essential Medicines
Thomas Pogge
Professor of Political Science, Columbia University
Centre for Applied Philosophy and Public Ethics, Australian National University
Centre for the Study of Mind in Nature, University of Oslo
Pipe Insulation System
This document provides details for insulating pipe systems. It specifies using mineral fiber insulation conforming to ASTM C 547 Class 1, with a factory applied FSK/kraft paper laminate jacket. The insulation will be used on cold water, hot water, and chilled water pipes as described. Half wood sections will be inserted into the insulation and taped with FSK tape to maintain the vapor barrier. 360 degree type 40 pipe protection shields 12 inches long will be used, along with U-bolt or hanger supports conforming to MSS SP 58-69 Type 24 standards.
Chapter9 Hydrant Bradburn
Fire hydrants have several key components and uses. The upper section includes outlets that connect to hoses for firefighting. The lower section connects to water mains and contains a main valve. There are different types of hydrants like dry barrel for freezing climates and wet barrel that are always full of water. Proper installation is important, making sure the hydrant has good footing and drainage, is visible to crews, and can be easily accessed and operated during an emergency. Routine maintenance like inspections helps ensure hydrants remain functional.
F3 Subsoil drainage and installation
This document discusses various aspects of designing and installing subsoil drainage systems. It provides guidance on determining pipe sizing and placement, choosing the proper filter material, and common installation mistakes to avoid. Key points covered include designing the system from the discharge point upward with uniform fall, using washed sand rather than gravel as the filter material to prevent particle migration, and ensuring proper trench grading and slope.
20100514 pipe arch presentation to iem may 2010
This presentation provides information on the construction of a pipe arch tunnel project in Malaysia. It discusses the general project details including the tunnel length and location crossing a highway. It then summarizes the chronology of construction including building a triple cell drainage culvert, demolishing an existing box culvert, and constructing the twin pipe arch tunnels under the highway. The presentation describes the pipe arch tunnel concept and construction steps. It also details a catastrophe that occurred during construction where a damaged section of pipe had to be retrieved.
Pipe shields for beginners
This presentation will give you an introduction to Pipe Shields, Inc. and its unique line of pre-insulated pipe supports, slides, guides and anchors that it developed and patented over its 40 year history. It will cover various designs, commercial applications (chilled and heated water lines, HVAC systems and low pressure steam lines), installation and maintenance procedures and the benefits of using pre-insulated pipe supports (vs. doing insulation in the field). This presentation will be delivered by Albert Dizon, General Manager of Pipe Shields, who has been working with pre-insulated pipe supports for 30+ years. Join us and receive some of his experience and wisdom!
Pipe Support Field Inspection, Installation & Maintenance
The document is about a webinar on pipe support field inspection, installation, and maintenance presented by Jerry Godinaer. It provides information on inspecting, installing, and maintaining different types of pipe supports including variable and constant spring hangers, restraint devices, pipe shoes, slide plates, and hardware components. It discusses guidelines for on-site surveys, what to inspect for existing supports, and criteria for adjusting or replacing supports if needed.
804 query-short-spools-support
This document provides guidelines for supporting piping systems that use flexible grooved couplings. It discusses the differences between supporting rigid versus flexible coupling systems. For flexible systems that allow movement, it recommends maximum hanger spacing distances between supports for various pipe sizes and whether full linear movement is or is not required. No pipe section should be left unsupported between any two couplings. Supports should be attached to adjoining pipes and equipment only, not directly to the couplings.
Ms for-mechanical-piping-system-installation-work
This document provides a method statement for installing mechanical piping at the Saigon M&C Tower Project. It describes the installation of various pipe materials, including PPR, uPVC, cast iron, ductile iron, and steel pipes. For PPR pipe installation specifically, it details the adhesive bonding joint process of cutting, heating, joining, and welding pipes and fittings. It also provides guidance on installing exposed and concealed PPR pipes.
Topik 3 sanitary pipework
The document discusses sanitary piping systems. It describes the main components of a piping system including main pipes, feeder pipes, branch pipes, and valves. It also discusses factors that cause head loss in pipes such as differences in pipe size, changes in flow direction, friction, and differences in gradient or level. Finally, it summarizes different types of sanitary discharge pipe systems including single stack, single pipe, and dual pipe systems.
Chapter 14 Fire Fighter Academy
This chapter discusses water supply systems used by firefighters. It covers the different types of water sources and supply systems, including underground piping and storage tanks. It also describes the valves used to control water flow and the different types of fire hydrants, their locations, and how to inspect and operate them. Alternative water supply methods for rural areas are discussed, such as water shuttles using portable tanks and relay pumping from nearby sources. The chapter emphasizes the importance of firefighters understanding local water supply systems and how to access water for firefighting.
178680732 pipe-hanger-design
This document provides guidance on designing pipe hangers and supports. It discusses determining hanger locations based on pipe size and configuration. It describes calculating hanger loads based on the weight of pipe, fittings, valves, and insulation. It also addresses calculating thermal movement of piping at hanger locations. The document provides information on selecting appropriate hangers based on the loads and movements, including spring hangers. It includes sample problems demonstrating how to apply the guidance. An extensive section lists the weights of common piping materials to aid in load calculations. The document is intended as a reference for engineers involved in pipe hanger and support design.
Viewers also liked (20)
In-Place Pipe Support Load Testing and Hanger Surveys_Part of a Best in Class...
In-Place Pipe Support Load Testing and Hanger Surveys_Part of a Best in Class...
2 louis p. pollono - 4046169- pipe support for use in a nuclear system
2 louis p. pollono - 4046169- pipe support for use in a nuclear system
Pipe Support Field Inspection, Installation & Maintenance
Pipe Support Field Inspection, Installation & Maintenance
More from samson oakley
GF-0105
This document contains a floor plan layout for the Anstice Memorial building. It lists various rooms along with their names, room numbers, and sizes in square meters. The largest rooms are the Cardio Zone at 295 sqm, Weights Zone at 197 sqm, and Spin Studio at 82 sqm. Stairwells and bathrooms of various sizes are also noted. At the bottom is information about the drawing including the scale, title, client, and other details.
GF-0104
This drawing shows the south elevation of the Anstice Memorial building in Anstice Square, Telford at a scale of 1:100. Key details include dimensions for the ground level, base roof, hip roof, and total figure of opening. It was drawn by SO and checked by CO on May 13, 2016 for an academic assignment as part of the School of Architecture and the Built Environment at the University of Wolverhampton.
GA-0012
This floor plan shows the layout of the ground floor of the Anstice Memorial building. It includes labels for 15 rooms of various sizes and functions, including a rock climbing centre, changing rooms, and reception area. The largest room is the rock climbing centre, which measures 96 square meters. Dimensions are provided in meters for each room.
a1 boards
The document describes plans for renovating an old building into a new fitness center called the Madeley Elite Recreational Centre (MERC). The renovations include:
- Converting the ground, first, and second floors into a cross-fit and indoor rock climbing facility with unique equipment and trained instructors.
- Including three group exercise classrooms on the third floor for classes like HIIT, yoga, and spin fitness that can also be rented out.
- Installing an elevator to make all floors accessible.
- Designing the rear of the building to accommodate indoor rock climbing for 15 people.
SL010 - Roof Plan
The roof is made of aluminium pitched at 1.6 degrees inward toward a central drainage system. There are roof lights on the north eastern side. Key details include all-around aluminium coping and a rubber grid running the length of the internal roof part with no parapet wall and overflow water points.
SL020 & SL022 - sections
This document contains a floor plan layout and section drawings for a science block building project. The floor plan includes room labels and dimensions for various classrooms, laboratories, corridors, and other facilities across four levels. Longitudinal and cross sections illustrate foundation depths, wall constructions, roof structure, and other building details. Dimensioned drawings are provided for construction along with references to additional structural, mechanical, and layout drawings.
SL015 - second and third Floor
This document contains a floor plan layout for the second floor of a science block, listing various classrooms, hallways, offices, labs, and restrooms with their sizes in square meters. It includes notes specifying the internal wall materials, window types, flooring materials for different areas, and references related drawings for toilet layouts, lab details, and staircase details.
SL014 - ground and first floor
This document contains a floor plan for the ground and first floors of a science block at a university. The floor plan shows the layout and dimensions of rooms, including classrooms, laboratories, lecture theaters, a library, staff rooms, toilets and more. It includes labeling of internal and external walls as well as windows, doors and other features. The drawing information and scale is shown in the legend in the bottom right corner.
intergrated lab layouts 2s - Sheet - SL015 - lab layout plan
This document provides a floor plan layout for a new science lab at a university. The plan shows the location and dimensions of lab benches, sinks, fume hoods, service voids, and other fixtures. It specifies materials to be used for surfaces, walls, ceilings, doors and other features. Notes provide information on utilities, lighting, heating and other systems to be installed. Dimensions and specifications are given to fully describe the lab design and ensure all components are coordinated and installed properly.
More from samson oakley (9)
intergrated lab layouts 2s - Sheet - SL015 - lab layout plan
intergrated lab layouts 2s - Sheet - SL015 - lab layout plan
SL011 - Drainage Plan
- 1. DN DN DN DN 168 m² Refrence Library RN001 101 m² Lecture Theatre RN002 20 m² FEMALE W/C RN004 16 m² GENTS W/C RN005 13 m² Boiler Room RN008 245 m² Galler y and Entr ance RN009 21 m² Room RN003 245 m² Galler y and Entr ance RN009 MA Connection Covered Walk way Parking Area FM 9 FM 8 IN 98.2 FM 4 IN 99.2 FM 2 IN 99.8 FM 1 IN 99.6 Soil pipe runs along underside of 1st floor and into FM3 110mm cast i ron FM 3 IN 99.3 FM 6 FM 7 FM 10 IN 98.8 FM 11 IN 98.8 3 m² DISABLED RN006 2 m² C/C RN007 Existing pipe New manholes to be dug to depth of existing fall www.autodesk.com/revit SCALE (@ A1) CHECKED BY TITLE PROJECT NUMBER CLIENT PROJECT DRAWING NUMBER REV DRAWN BY DATE 1 : 100 22/05/201519:05:54 Drainage Plan SL987 Science Block University of W-ton CheckerAndrew Cunningham SL011 Samson oakley 22/05/15 MI SOUTH MI ARENA teatre MA MG 0 4m 1:100 1 2 3 NorthNorth SVP2SVP3 SVP8 RW P 1 RWP 2 RWP 3 RWP 4 SVP1 SVP4SVP 5SVP6 SVP 7 SVP 9 SVPS 10 SVP 11SVP 12SVP 13 G G G G G G G G G G G G G G G G SVP= SOIL AND VENT PIPE RWP= RAIN WATER PIPE FM= FOUL MANHOLE = RAIN WATER PIPE = SOIL PIPE svp 3- 14 to be vulcathene 110mm pipe 110mm r ainwater pipe Rain and soil pipes to then drop down into FM 3 New manhole surounding area tarmaced tarmaced taramaced You created this PDF from an application that is not licensed to print to novaPDF printer (http://www.novapdf.com)