This document outlines the procedures for dismantling an IOH MOCN Project wireless site model. It includes requirements for equipment, tools, certificates, safety inspections of the antenna and rack areas before and after dismantling, equipment labeling and packing, capturing the network management system configuration before and after, and updating the Netgear system after completion. The dismantling work will be documented through photos and an equipment list to ensure all materials are properly accounted for.

1. IOH
Site Model Dismantle IOH MOCN Project
Wireless
Prepared by
IOH Project
Quality Assurance Department
V 1.0

2. Document Information
Document Name Site Model Dismantle IOH MOCN Project (RAN)
Prepared by (QA) DQA IOH
Review by (TD) Qinjiarong – 468733 & Sediaman Sitanggang - 742616
Acknowledge by (PD) Lishucan – 330471; Xiongyi – 544556; Efran Handika - 259311
Approval by (IOH)
Approval Date
Version V 1.0

3. Output MOM Site Model
Note : If any exceptional/abnormal condition need to escalate and email to IOH QA & Huawei to give advice.

4. EHS Task
Tools, FA Kit, and Fire Extinguisher
Note: Tools box & P3K dalam kondisi terbuka, dan
tambahan untuk APAR (SOW : Power, BSC, dan
Kelistrikan).
PPE for Work & Pandemic
Note: Full APD untuk bekerja & preventif Covid-19
Certificate (WAH, Electrical, and FA)
Note: Sertifikat/Lisensi WAH dari Depnaker untuk
pekerja di atas tower, Sertifikat kelistrikan dan P3K.

5. Self Inspection Report
1.1 Antenna area view (Before dismantle)
Antenna belum dismantle dan lakukan
pengambilan photo.
1.2 Antenna area view (After dismantle)
Antenna setelah dismantle dan lakukan
pengambilan photo area bekas antenna terpasang

6. Self Inspection Report
1.3 Rack Cabinet view open and closed (Before
dismantle)
Check area cabinet dan ambil photo sebelum
melakukan dismantle.
1.4 Rack Cabinet view open (After dismantle)
Check area cabinet dan ambil photo setelah
melakukan dismantle.

7. Self Inspection Report
1.5 Pengukuran Ketinggian Antenna Sebelum
Dismantle
Ambil foto pengukuran ketinggian antenna
sebelum didismantle.
1.6 Pengukuran Ketinggian Antenna Setelah
Dismantle
Ambil foto pengukuran ketinggian area bekas
antenna setelah didismantle.

8. Self Inspection Report
1.7 Photo Before Packing (Semua Equipment & Kabel yang
Ada), Photo Serial Number Setiap Equipment Dismantle
Antenna belum dismantle dan lakukan pengambilan photo.
1.8 Antenna area view (After dismantle) + Label
Ambil foto semua material yang didismantel satu persatu atau secara
keseluruhan sebelum dipacking. UPEU 1, UPEU 2, FAN, WMPT/UMPT, GTMU,
CPRI Cable and upeu cable, RTN, board, antenna, IDU, ODU, Antenna, dll

9. Self Inspection Report
1.9 Photo List Equipment Dismantle per
Karton/Box/Packing (ATF Approved)
List material dismantle dengan Serial Number/Part
number.

10. Site Information
2.1 Configuration
Isi data configuration site.
2.2 Scope of Work (SOW)
Isi Type sesuai Product domain

11. Site Information
2.3 CRq Number Close
Isi no CRq. Check CRq ke technical.

12. System Capture
3.1 Capture on NMS Before Dismantle
Upload capture NMS site sebelum dilakukan
dismantle. Lakukan koordinasi dengan PIC Huawei
agar capture diambil.
3.2 Capture on NMS After Dismantle
Upload capture NMS site setelah dilakukan
dismantle. Lakukan koordinasi dengan PIC Huawei
agar capture diambil

13. System Capture
3.3 Deletion/updateNetgear
Upload capture Netgear yang sudah approved
setelah process dismantle selesai dilakukan.

14. THANK YOU
QHSE IOH