Shrinktek Viton heat shrink tubing
•
0 likes•912 views
This document provides information on Viton heat shrink tubing produced by Thorne & Derrick UK, including product specifications, sizes available, and ordering details. Viton tubing has high tensile strength and elongation, and can withstand temperatures from -55°C to 200°C while resisting chemicals like fuels, oils, and solvents. It is often used for applications requiring resistance to heat and corrosive fluids. Standard tubing colors are black and ordering involves specifying the product code, size, and color.
Report
Share
Report
Share
Download to read offline
Recommended
Shrinktek SE Heat Shrink Tubing - Abrasion Resistant Heat Shrink Tubing
Shrinktek SE Heat Shrink Tubing - Abrasion Resistant Heat Shrink TubingThorne & Derrick International
Military Grade: MIL DTL 23053/1
Heat Shrink Tubings - Insulate, Protect & Identify
SE heat shrink is ideal for providing mechanical protection with solvent resistance to gasoline, hydraulic fluid and lubricating oils.
Approved to military grade MIL-DTL 23053/1 the SE range of abrasion resistant elastomer heat shrink tubing has a shrink ratio of 2:1 and operating temperatures of -70 to 120 Degrees Celsius.
Thorne & Derrick are the largest UK distributor of heat shrink tubings and sleevings including 3M, Panduit, Hellermann Tyton, DSG Canusa, Shrinktek and Thomas & Betts.
Stock lines include thin, medium and thick wall adhesive lined heat shrink sleeves and moulded shapes (heat shrink cable caps, cable breakouts and cable boots) - insulate, seal, protect with heat shrinkable tubing.Shrinktek SPLT Heat Shrink Tubing - Low Temperature Flame Retarded Heat Shrin...
Shrinktek SPLT Heat Shrink Tubing - Low Temperature Flame Retarded Heat Shrin...Thorne & Derrick International
Shrinktek Heat Shrink Tubings - Insulate, Protect & Identify
SPLT Shrinktek heat shrink is suitable for providing insulation to electrical equipment that is sensitive to heat exposure.
Thorne & Derrick are the largest UK distributor of heat shrink tubings and sleevings including 3M, Panduit, Hellermann Tyton, DSG Canusa, Shrinktek and Thomas & Betts.
Stock lines include thin, medium and thick wall adhesive lined heat shrink sleeves and moulded shapes (heat shrink cable caps, cable breakouts and cable boots) - insulate, seal, protect with heat shrinkable tubing.
Shrinktek Heat Shrink Tubes
Shrinktek heat shrink tubing is available in a variety of material types designed to operate at a range of temperatures from -65°C to +260°C. The heat shrink tubing can be thin wall, standard wall or medium wall tubes with or without an adhesive inner coating. Most heat shrink tubing is flame retarded or self extinguishing with a range of shrink ratios from 2:1 to 4:1 - Shrinktek heat shrink is available in an extensive range of colours.Shrinktek SPTW Heat Shrink Tubing - Ultra Thin Wall Heat Shrink Tubing
Shrinktek SPTW Heat Shrink Tubing - Ultra Thin Wall Heat Shrink TubingThorne & Derrick International
This document provides specifications and ordering information for an ultra thin wall heat shrinkable polyolefin tubing. The tubing has a shrink ratio of 2:1, shrinks at 100°C, and has an operating temperature range of -55°C to 125°C. It lists properties such as tensile strength, heat shock resistance, and electric strength. Standard sizes range from 3/64 inch to 1 inch in diameter, and it is supplied on reels in lengths from 50 to 656 feet. Contact information is given for the manufacturer.Shrinktek SPZH Heat Shrink Tubing - Zero Halogen Flame Retarded Heat Shrink T...
Shrinktek SPZH Heat Shrink Tubing - Zero Halogen Flame Retarded Heat Shrink T...Thorne & Derrick International
This document provides specifications for flexible flame-retarded, low-fire hazard heat shrinkable tubing called SPZH. It lists properties such as tensile strength, heat shock resistance, and flammability. SPZH has a 2:1 shrink ratio, shrinks at 100°C, operates from -30°C to 125°C, and contains no added halogens. Standard sizes range from 1.2mm to 25.4mm diameters and are supplied on reels up to 500 feet long in black or custom colors. Ordering information includes part numbers, sizes, and colors.Heat Shrink - LSF Zero Halogen Heat Shrink Tubing - SPZH 1.2mm
This document provides property test method values and specification values for a flexible flame retarded, low-fire hazard heat shrinkable tubing called SPZH. It lists results for tensile strength, elongation, heat shock, heat aging, low temperature flexibility, flammability, electric strength, corrosion resistance, and other tests. It also provides ordering data such as available sizes, minimum/maximum diameters, wall thicknesses, reel lengths, shrink ratio, operating temperature range, shrink temperature, and packaging information. The tubing meets various standards and approvals like DEF 59-97 and MIL-I-23053/5.
Thomson BSA Grease Brochure
This document summarizes grease options for lubricating ball and lead screw assemblies. It provides a lubrication selection chart that lists 5 grease types from BS&A, each formulated for different applications. The chart specifies maximum temperature limits, compatible mechanism materials, mechanical load suitability, temperature variation properties, and other specifications like vapor pressure and packaging options for each grease type. The document aims to help users choose the appropriate grease for their ball and lead screw assembly requirements.
Detailed Explanation of Heat Exchangers Failures
Awareness of how an Heat Exchanger failure occurs due to various leaks, Ruptures, and Tube chocking. These data is been taken from practical exposure that have occurred in some of the industries and most commonly occurred failure.
Nickel alloys resistance to oleum
Stainless steel 304 is the recommended material for dealing with low amounts and high temperature applications of oleum. However the low carbon stainless steel 304L can be employed
Recommended
Shrinktek SE Heat Shrink Tubing - Abrasion Resistant Heat Shrink Tubing
Shrinktek SE Heat Shrink Tubing - Abrasion Resistant Heat Shrink TubingThorne & Derrick International
Military Grade: MIL DTL 23053/1
Heat Shrink Tubings - Insulate, Protect & Identify
SE heat shrink is ideal for providing mechanical protection with solvent resistance to gasoline, hydraulic fluid and lubricating oils.
Approved to military grade MIL-DTL 23053/1 the SE range of abrasion resistant elastomer heat shrink tubing has a shrink ratio of 2:1 and operating temperatures of -70 to 120 Degrees Celsius.
Thorne & Derrick are the largest UK distributor of heat shrink tubings and sleevings including 3M, Panduit, Hellermann Tyton, DSG Canusa, Shrinktek and Thomas & Betts.
Stock lines include thin, medium and thick wall adhesive lined heat shrink sleeves and moulded shapes (heat shrink cable caps, cable breakouts and cable boots) - insulate, seal, protect with heat shrinkable tubing.Shrinktek SPLT Heat Shrink Tubing - Low Temperature Flame Retarded Heat Shrin...
Shrinktek SPLT Heat Shrink Tubing - Low Temperature Flame Retarded Heat Shrin...Thorne & Derrick International
Shrinktek Heat Shrink Tubings - Insulate, Protect & Identify
SPLT Shrinktek heat shrink is suitable for providing insulation to electrical equipment that is sensitive to heat exposure.
Thorne & Derrick are the largest UK distributor of heat shrink tubings and sleevings including 3M, Panduit, Hellermann Tyton, DSG Canusa, Shrinktek and Thomas & Betts.
Stock lines include thin, medium and thick wall adhesive lined heat shrink sleeves and moulded shapes (heat shrink cable caps, cable breakouts and cable boots) - insulate, seal, protect with heat shrinkable tubing.
Shrinktek Heat Shrink Tubes
Shrinktek heat shrink tubing is available in a variety of material types designed to operate at a range of temperatures from -65°C to +260°C. The heat shrink tubing can be thin wall, standard wall or medium wall tubes with or without an adhesive inner coating. Most heat shrink tubing is flame retarded or self extinguishing with a range of shrink ratios from 2:1 to 4:1 - Shrinktek heat shrink is available in an extensive range of colours.Shrinktek SPTW Heat Shrink Tubing - Ultra Thin Wall Heat Shrink Tubing
Shrinktek SPTW Heat Shrink Tubing - Ultra Thin Wall Heat Shrink TubingThorne & Derrick International
This document provides specifications and ordering information for an ultra thin wall heat shrinkable polyolefin tubing. The tubing has a shrink ratio of 2:1, shrinks at 100°C, and has an operating temperature range of -55°C to 125°C. It lists properties such as tensile strength, heat shock resistance, and electric strength. Standard sizes range from 3/64 inch to 1 inch in diameter, and it is supplied on reels in lengths from 50 to 656 feet. Contact information is given for the manufacturer.Shrinktek SPZH Heat Shrink Tubing - Zero Halogen Flame Retarded Heat Shrink T...
Shrinktek SPZH Heat Shrink Tubing - Zero Halogen Flame Retarded Heat Shrink T...Thorne & Derrick International
This document provides specifications for flexible flame-retarded, low-fire hazard heat shrinkable tubing called SPZH. It lists properties such as tensile strength, heat shock resistance, and flammability. SPZH has a 2:1 shrink ratio, shrinks at 100°C, operates from -30°C to 125°C, and contains no added halogens. Standard sizes range from 1.2mm to 25.4mm diameters and are supplied on reels up to 500 feet long in black or custom colors. Ordering information includes part numbers, sizes, and colors.Heat Shrink - LSF Zero Halogen Heat Shrink Tubing - SPZH 1.2mm
This document provides property test method values and specification values for a flexible flame retarded, low-fire hazard heat shrinkable tubing called SPZH. It lists results for tensile strength, elongation, heat shock, heat aging, low temperature flexibility, flammability, electric strength, corrosion resistance, and other tests. It also provides ordering data such as available sizes, minimum/maximum diameters, wall thicknesses, reel lengths, shrink ratio, operating temperature range, shrink temperature, and packaging information. The tubing meets various standards and approvals like DEF 59-97 and MIL-I-23053/5.
Thomson BSA Grease Brochure
This document summarizes grease options for lubricating ball and lead screw assemblies. It provides a lubrication selection chart that lists 5 grease types from BS&A, each formulated for different applications. The chart specifies maximum temperature limits, compatible mechanism materials, mechanical load suitability, temperature variation properties, and other specifications like vapor pressure and packaging options for each grease type. The document aims to help users choose the appropriate grease for their ball and lead screw assembly requirements.
Detailed Explanation of Heat Exchangers Failures
Awareness of how an Heat Exchanger failure occurs due to various leaks, Ruptures, and Tube chocking. These data is been taken from practical exposure that have occurred in some of the industries and most commonly occurred failure.
Nickel alloys resistance to oleum
Stainless steel 304 is the recommended material for dealing with low amounts and high temperature applications of oleum. However the low carbon stainless steel 304L can be employed
Inconel Alloy 600 | UNS N0660
Buy Inconel Alloy 600 products of superior quality and fulfill your business needs for business. Sheets, Strips, wires, rods and pipe fittings are available.
Compounded ptfe
The document provides technical data for various compounded PTFE materials, including their density, water absorption, tensile strength, elongation, hardness, thermal conductivity, coefficient of thermal expansion, volume resistivity, surface resistivity, dielectric strength, coefficient of friction, and safe operating temperatures. It notes that the values given are for reference only and customers should test the suitability of the materials for their specific applications.
Hutchinson Stop-Choc Automotive and Trucks
A revolutionery range of products which is used in various applications in the Automotive and Trucks industry to control Noise and vibrations. Ideal for NVH teams , e-cars, Hybrids etc....
Hocine Dahmane
Key account Manager
hocine.dahmane@stop-choc.de
+4917622094808
Heat Shrink - UL-CSA Flame Retarded Polyolefin - SPUL 1.2mm
The document provides property test method values and specifications for a flexible flame-retarded polyolefin heat shrinkable tubing. Key properties include a minimum tensile strength of 10 MPa under ISO 37, minimum 250% ultimate elongation under ISO 37, and maximum specific gravity of 1.35 under ISO 1183. The tubing passes low temperature flexibility at -55°C under ASTM D2671 with no cracking, and flame retardancy testing under ASTM D876. It is approved under various specifications including UL 224 and VW1 for use at 600V and 125°C.
Material properties of magnesium
This document summarizes and compares the physical, chemical, and mechanical properties of magnesium alloys AZ91 and AM60 to other common materials like aluminum alloys and plastics. Some key points are:
- Magnesium alloys have a density about two-thirds that of aluminum but higher than plastics. They also have much higher thermal conductivity and damping capacity.
- Mechanically, magnesium alloys have higher strength-to-weight ratios than aluminum or plastics. They also have good ductility, impact strength, and fatigue strength.
- Processing of magnesium alloys provides advantages over aluminum like lower melting costs, higher productivity in die casting, and ability to form complex shapes with thin walls, making magnesium
Inconel Alloy 600
This document provides information about Inconel 600 nickel-chrome alloy, including its typical composition, properties, and applications. Some key points:
- Inconel 600 has high strength and corrosion resistance up to 2000°F, making it suitable for applications in aerospace, gas turbines, and chemical processing.
- It has good mechanical properties and welding characteristics. Its nickel content provides resistance to reducing/alkaline conditions while chromium improves oxidation resistance.
- Physical properties included are density, electrical resistivity at different temperatures, thermal expansion rates, modulus of elasticity, and more. Mechanical properties like tensile strength and yield strength at various temperatures are also specified.
- The document gives details on In
Ceramicos presentacion
The document provides guidelines for designing reliable ceramic products with optimized costs and stresses. It recommends avoiding oval shapes and sudden changes in cross-section to promote more homogeneous stress distribution. Modular structures are preferred over large volumes to reduce defects. Prestressing ceramics in compression also helps minimize tensile stresses. Large contact areas and avoidance of corners, sharp edges and cut-outs further reduces stresses. Applications discussed include ceramic brake disks and heated oxygen sensors using zirconia ceramics.
Spraymet thermal spray and cladding ppt pump and valve sector
Spraymet Surface Technologies provides various surface modification processes at its plants in Bangalore and Pune, India, including thermal spray coatings, cladding, plating, and nitriding. Thermal spray processes include flame spray, robotic plasma spray, robotic high-velocity oxy-fuel spray (HVOF), and cold spray. Cladding techniques include plasma transferred arc spraying and high-energy tungsten inert gas welding. The company's services can be used to coat components for oil/gas, valves, pumps, and other industrial applications.
Fused spinel /Henan Jiangshan Industry Co., Ltd
ALUMINA-MAGNESIA SPINEL is one of the most resistant refractory compounds. Having a low thermal working temperature, are outstanding in high refractoriness, thermal stability and chemical stability, ALUMINA-MAGNESIA SPINEL is a highly recommended refractory raw material.
Thermal spraying
This document discusses various surface coating methods used to improve wear and corrosion resistance of materials. It provides details on several coating techniques including thermal spraying methods like flame spraying, plasma spraying and HVOF. The key points are:
1) Different coating methods like thermal spraying, vapor deposition, mechanical cladding are used to improve surface properties.
2) Thermal spraying techniques like flame spraying, plasma spraying and HVOF are described in detail along with the coating materials, temperatures involved and applications.
3) Characteristics of different coatings like hardness, porosity and adhesion strength obtained from various spraying methods are summarized in tables for comparison.
Cost Reduction In Heat Treatment, Hot Rolling and Hot Forging by the use of P...
This presentation outlines an innovative concept to reduce cost in heat treatment, hot rolling and hot forging. Industrial case studies and photos are included.
Welding duplex stainless steel
This document discusses welding practices for Sandvik duplex stainless steels SAF 2304, SAF 2205, and SAF 2507. It covers metallurgical considerations, recommended welding processes, filler metal compositions, mechanical and corrosion properties of welds, importance of heat input and interpass temperature, the role of nitrogen, post weld cleaning, dissimilar joining, and joint design. Key recommendations include using TIG, MIG, or SAW welding with the appropriate filler metal, limiting heat input and interpass temperatures, and adding nitrogen to shielding gas when welding SAF 2507 to minimize ferrite content in the weld metal.
inconel welding wire -ador welding ltd-manual plazma cutting machines
General Structural Welding
Fabrication of Cylinders and vessels
Long Seam and Cir Seam Welding of Pipes
General Description :
Agglomerated Flux
Aluminate- Rutile Type Flux
Acidic Flux having Basicity Index of 0.6
Active Flux with moderate Si and Mn pick-up
For Single and Multi-pass Butt and fillet welding (With EM12K Wire restrict to 15mm thickness for multi-pass)
For Carbon Steels
Suitable for Single Wire & Tandem System
Suitable for Welding Speeds of 0.35 –0.60 m/min
Grain Size – 0.25-2.00mm
Type of Current – DCEP / AC 800A
Wall Neutrality Number with EL8 Wire is 56
Material selection for springs
A short introduction on Materials used for producing mechanical springs in various fields of engineering.
Lv cable is_694
This document outlines standards for PVC insulated cables with voltages up to 1100V as per IS 694. It covers the scope, construction, and testing requirements. The scope specifies that only unarmored PVC insulated copper and aluminum conductor cables and cords are included. Testing includes type, acceptance, routine, and optional tests. Acceptance tests cover aspects like annealing, tensile strength, thickness, resistance, high voltage, and flammability. Additional tests are specified for outdoor cables and low-temperature conditions.
Ficha slade 3300 cjk
This document provides information on the Slade 3300CJK abrasive isolator packing material. It is a carbon jacketed graphite and Kevlar packing recommended for use up to 500°F/260°C in high pressure pump and steam applications. The packing is designed to provide virtually leak free performance and can be used as an anti-extrusion ring or anti-abrasion bottom ring in slurry applications.
Binding wires & zinc spray
This document discusses binding wires and zinc spray. It begins by explaining that binding wires are made of galvanized, plastic-coated steel wire that is soft and ductile with high strength. It then describes the manufacturing process for binding wires and lists their common physical parameters. The document also provides details on the types and specifications of binding and stainless steel wires. It discusses the chemical composition and industrial applications of binding wires. Finally, it covers zinc spray galvanizing, describing the process, chemical composition, industrial uses, and proper disposal.
Shrinktek SPN Heat Shrink Tubing - Commercial Grade Polyolefin Heat Shrink Tu...
Shrinktek SPN Heat Shrink Tubing - Commercial Grade Polyolefin Heat Shrink Tu...Thorne & Derrick International
Commercial Grade Polyolefin Heat Shrink Tubing
SPN heat shrink is suitable for high volume commercial and industrial applications where flame retarded properties are not required.
SPN Heat Shrink Tubing - Specification
105°C Commercial Grade Non Flame Retarded Heat Shrinkable Tubing
Shrink Ratio: 2:1
Operating Temperature: -55°C to 105°C
Shrink Temperature : 90°C
Heat shrink colours - shiny black and clear
Thorne & Derrick are the largest UK distributor of heat shrink tubings and sleevings including 3M, Panduit, Hellermann Tyton, DSG Canusa, Shrinktek and Thomas & Betts.
Stock lines include thin, medium and thick wall adhesive lined heat shrink sleeves and moulded shapes (heat shrink cable caps, cable breakouts and cable boots) - insulate, seal, protect with heat shrinkable tubing.Shrinktek SPDW Heat Shrink Tubing - Dual Wall Flame Retarded Heat Shrink Tubing
Shrinktek SPDW Heat Shrink Tubing - Dual Wall Flame Retarded Heat Shrink TubingThorne & Derrick International
Dual Wall Flame Retarded Heat Shrink Tubing
Military Grade Heat Shrink : MIL-DTL 23053/4
Underwriters Lab : UL 224
CSA : 600V, 125 Degrees Celsius
Heat Shrink Tubings - Insulate, Protect & Identify
SPDW heat shrink is ideal for sealing connector to cable transitions and similar moisture proofing applications with adhesive lined tubing.
SPDW is approved to MIL-DTL 23053/4 and UL 224.
Shrinktek Dual Wall Flame Retarded Heat Shrink Tubing
Thorne & Derrick are the largest UK distributor of heat shrink tubings and sleevings including 3M, Panduit, Hellermann Tyton, DSG Canusa, Shrinktek and Thomas & Betts.
Stock lines include thin, medium and thick wall adhesive lined heat shrink sleeves and moulded shapes (heat shrink cable caps, cable breakouts and cable boots) - insulate, seal, protect with heat shrinkable tubing.
3:1 Flexible Flame Retarded Heat Shrink Tubing
This document provides specifications for SP3X heat shrink tubing. SP3X is a flame-retarded, flexible, heat shrinkable polyolefin tubing with a 3:1 shrink ratio. The document lists property test methods and values for metrics like tensile strength, elongation, heat shock resistance, corrosion resistance, and more. It also provides ordering information with available sizes from 1.5/0.5mm to 39/13mm, standard colors and packaging, and notes the operating temperature range of -55°C to 135°C.
UHMWPE Rods & Sheets
This document provides property specifications for ultra-high molecular weight polyethylene (UHMWPE) plastics with minimum molecular weights of 9.0 million and 5.0 million. It lists various material properties like density, flammability, water absorption rate, tensile strength, elongation, hardness, melting temperature, thermal conductivity, and service temperature ranges. Properties are specified according to standards like DIN, ISO, ASTM, IEC, along with suitable applications and disclaimer about testing for specific use cases.
UHMWPE rods and Sheet - Pragati Plastics Pvt. Ltd.
This document provides property information for ultra-high molecular weight polyethylene (UHMWPE) materials suitable for food contact applications. It lists various material properties like density, flammability ratings, water absorption rates, tensile strength, elongation percentages, hardness, melting temperature, thermal conductivity, and electrical insulation properties. The UHMWPE has a minimum molecular weight of 9.0 million or 5.0 million, density of 0.93-0.95 g/cm3, and is suitable for applications with service temperatures between -250 to 130 degrees Celsius. The document also includes a disclaimer that the provided values are for reference only and actual performance may vary under complex application conditions.
More Related Content
What's hot
Inconel Alloy 600 | UNS N0660
Buy Inconel Alloy 600 products of superior quality and fulfill your business needs for business. Sheets, Strips, wires, rods and pipe fittings are available.
Compounded ptfe
The document provides technical data for various compounded PTFE materials, including their density, water absorption, tensile strength, elongation, hardness, thermal conductivity, coefficient of thermal expansion, volume resistivity, surface resistivity, dielectric strength, coefficient of friction, and safe operating temperatures. It notes that the values given are for reference only and customers should test the suitability of the materials for their specific applications.
Hutchinson Stop-Choc Automotive and Trucks
A revolutionery range of products which is used in various applications in the Automotive and Trucks industry to control Noise and vibrations. Ideal for NVH teams , e-cars, Hybrids etc....
Hocine Dahmane
Key account Manager
hocine.dahmane@stop-choc.de
+4917622094808
Heat Shrink - UL-CSA Flame Retarded Polyolefin - SPUL 1.2mm
The document provides property test method values and specifications for a flexible flame-retarded polyolefin heat shrinkable tubing. Key properties include a minimum tensile strength of 10 MPa under ISO 37, minimum 250% ultimate elongation under ISO 37, and maximum specific gravity of 1.35 under ISO 1183. The tubing passes low temperature flexibility at -55°C under ASTM D2671 with no cracking, and flame retardancy testing under ASTM D876. It is approved under various specifications including UL 224 and VW1 for use at 600V and 125°C.
Material properties of magnesium
This document summarizes and compares the physical, chemical, and mechanical properties of magnesium alloys AZ91 and AM60 to other common materials like aluminum alloys and plastics. Some key points are:
- Magnesium alloys have a density about two-thirds that of aluminum but higher than plastics. They also have much higher thermal conductivity and damping capacity.
- Mechanically, magnesium alloys have higher strength-to-weight ratios than aluminum or plastics. They also have good ductility, impact strength, and fatigue strength.
- Processing of magnesium alloys provides advantages over aluminum like lower melting costs, higher productivity in die casting, and ability to form complex shapes with thin walls, making magnesium
Inconel Alloy 600
This document provides information about Inconel 600 nickel-chrome alloy, including its typical composition, properties, and applications. Some key points:
- Inconel 600 has high strength and corrosion resistance up to 2000°F, making it suitable for applications in aerospace, gas turbines, and chemical processing.
- It has good mechanical properties and welding characteristics. Its nickel content provides resistance to reducing/alkaline conditions while chromium improves oxidation resistance.
- Physical properties included are density, electrical resistivity at different temperatures, thermal expansion rates, modulus of elasticity, and more. Mechanical properties like tensile strength and yield strength at various temperatures are also specified.
- The document gives details on In
Ceramicos presentacion
The document provides guidelines for designing reliable ceramic products with optimized costs and stresses. It recommends avoiding oval shapes and sudden changes in cross-section to promote more homogeneous stress distribution. Modular structures are preferred over large volumes to reduce defects. Prestressing ceramics in compression also helps minimize tensile stresses. Large contact areas and avoidance of corners, sharp edges and cut-outs further reduces stresses. Applications discussed include ceramic brake disks and heated oxygen sensors using zirconia ceramics.
Spraymet thermal spray and cladding ppt pump and valve sector
Spraymet Surface Technologies provides various surface modification processes at its plants in Bangalore and Pune, India, including thermal spray coatings, cladding, plating, and nitriding. Thermal spray processes include flame spray, robotic plasma spray, robotic high-velocity oxy-fuel spray (HVOF), and cold spray. Cladding techniques include plasma transferred arc spraying and high-energy tungsten inert gas welding. The company's services can be used to coat components for oil/gas, valves, pumps, and other industrial applications.
Fused spinel /Henan Jiangshan Industry Co., Ltd
ALUMINA-MAGNESIA SPINEL is one of the most resistant refractory compounds. Having a low thermal working temperature, are outstanding in high refractoriness, thermal stability and chemical stability, ALUMINA-MAGNESIA SPINEL is a highly recommended refractory raw material.
Thermal spraying
This document discusses various surface coating methods used to improve wear and corrosion resistance of materials. It provides details on several coating techniques including thermal spraying methods like flame spraying, plasma spraying and HVOF. The key points are:
1) Different coating methods like thermal spraying, vapor deposition, mechanical cladding are used to improve surface properties.
2) Thermal spraying techniques like flame spraying, plasma spraying and HVOF are described in detail along with the coating materials, temperatures involved and applications.
3) Characteristics of different coatings like hardness, porosity and adhesion strength obtained from various spraying methods are summarized in tables for comparison.
Cost Reduction In Heat Treatment, Hot Rolling and Hot Forging by the use of P...
This presentation outlines an innovative concept to reduce cost in heat treatment, hot rolling and hot forging. Industrial case studies and photos are included.
Welding duplex stainless steel
This document discusses welding practices for Sandvik duplex stainless steels SAF 2304, SAF 2205, and SAF 2507. It covers metallurgical considerations, recommended welding processes, filler metal compositions, mechanical and corrosion properties of welds, importance of heat input and interpass temperature, the role of nitrogen, post weld cleaning, dissimilar joining, and joint design. Key recommendations include using TIG, MIG, or SAW welding with the appropriate filler metal, limiting heat input and interpass temperatures, and adding nitrogen to shielding gas when welding SAF 2507 to minimize ferrite content in the weld metal.
inconel welding wire -ador welding ltd-manual plazma cutting machines
General Structural Welding
Fabrication of Cylinders and vessels
Long Seam and Cir Seam Welding of Pipes
General Description :
Agglomerated Flux
Aluminate- Rutile Type Flux
Acidic Flux having Basicity Index of 0.6
Active Flux with moderate Si and Mn pick-up
For Single and Multi-pass Butt and fillet welding (With EM12K Wire restrict to 15mm thickness for multi-pass)
For Carbon Steels
Suitable for Single Wire & Tandem System
Suitable for Welding Speeds of 0.35 –0.60 m/min
Grain Size – 0.25-2.00mm
Type of Current – DCEP / AC 800A
Wall Neutrality Number with EL8 Wire is 56
Material selection for springs
A short introduction on Materials used for producing mechanical springs in various fields of engineering.
Lv cable is_694
This document outlines standards for PVC insulated cables with voltages up to 1100V as per IS 694. It covers the scope, construction, and testing requirements. The scope specifies that only unarmored PVC insulated copper and aluminum conductor cables and cords are included. Testing includes type, acceptance, routine, and optional tests. Acceptance tests cover aspects like annealing, tensile strength, thickness, resistance, high voltage, and flammability. Additional tests are specified for outdoor cables and low-temperature conditions.
Ficha slade 3300 cjk
This document provides information on the Slade 3300CJK abrasive isolator packing material. It is a carbon jacketed graphite and Kevlar packing recommended for use up to 500°F/260°C in high pressure pump and steam applications. The packing is designed to provide virtually leak free performance and can be used as an anti-extrusion ring or anti-abrasion bottom ring in slurry applications.
Binding wires & zinc spray
This document discusses binding wires and zinc spray. It begins by explaining that binding wires are made of galvanized, plastic-coated steel wire that is soft and ductile with high strength. It then describes the manufacturing process for binding wires and lists their common physical parameters. The document also provides details on the types and specifications of binding and stainless steel wires. It discusses the chemical composition and industrial applications of binding wires. Finally, it covers zinc spray galvanizing, describing the process, chemical composition, industrial uses, and proper disposal.
What's hot (17)
Heat Shrink - UL-CSA Flame Retarded Polyolefin - SPUL 1.2mm
Heat Shrink - UL-CSA Flame Retarded Polyolefin - SPUL 1.2mm
Spraymet thermal spray and cladding ppt pump and valve sector
Spraymet thermal spray and cladding ppt pump and valve sector
Cost Reduction In Heat Treatment, Hot Rolling and Hot Forging by the use of P...
Cost Reduction In Heat Treatment, Hot Rolling and Hot Forging by the use of P...
inconel welding wire -ador welding ltd-manual plazma cutting machines
inconel welding wire -ador welding ltd-manual plazma cutting machines
Similar to Shrinktek Viton heat shrink tubing
Shrinktek SPN Heat Shrink Tubing - Commercial Grade Polyolefin Heat Shrink Tu...
Shrinktek SPN Heat Shrink Tubing - Commercial Grade Polyolefin Heat Shrink Tu...Thorne & Derrick International
Commercial Grade Polyolefin Heat Shrink Tubing
SPN heat shrink is suitable for high volume commercial and industrial applications where flame retarded properties are not required.
SPN Heat Shrink Tubing - Specification
105°C Commercial Grade Non Flame Retarded Heat Shrinkable Tubing
Shrink Ratio: 2:1
Operating Temperature: -55°C to 105°C
Shrink Temperature : 90°C
Heat shrink colours - shiny black and clear
Thorne & Derrick are the largest UK distributor of heat shrink tubings and sleevings including 3M, Panduit, Hellermann Tyton, DSG Canusa, Shrinktek and Thomas & Betts.
Stock lines include thin, medium and thick wall adhesive lined heat shrink sleeves and moulded shapes (heat shrink cable caps, cable breakouts and cable boots) - insulate, seal, protect with heat shrinkable tubing.Shrinktek SPDW Heat Shrink Tubing - Dual Wall Flame Retarded Heat Shrink Tubing
Shrinktek SPDW Heat Shrink Tubing - Dual Wall Flame Retarded Heat Shrink TubingThorne & Derrick International
Dual Wall Flame Retarded Heat Shrink Tubing
Military Grade Heat Shrink : MIL-DTL 23053/4
Underwriters Lab : UL 224
CSA : 600V, 125 Degrees Celsius
Heat Shrink Tubings - Insulate, Protect & Identify
SPDW heat shrink is ideal for sealing connector to cable transitions and similar moisture proofing applications with adhesive lined tubing.
SPDW is approved to MIL-DTL 23053/4 and UL 224.
Shrinktek Dual Wall Flame Retarded Heat Shrink Tubing
Thorne & Derrick are the largest UK distributor of heat shrink tubings and sleevings including 3M, Panduit, Hellermann Tyton, DSG Canusa, Shrinktek and Thomas & Betts.
Stock lines include thin, medium and thick wall adhesive lined heat shrink sleeves and moulded shapes (heat shrink cable caps, cable breakouts and cable boots) - insulate, seal, protect with heat shrinkable tubing.
3:1 Flexible Flame Retarded Heat Shrink Tubing
This document provides specifications for SP3X heat shrink tubing. SP3X is a flame-retarded, flexible, heat shrinkable polyolefin tubing with a 3:1 shrink ratio. The document lists property test methods and values for metrics like tensile strength, elongation, heat shock resistance, corrosion resistance, and more. It also provides ordering information with available sizes from 1.5/0.5mm to 39/13mm, standard colors and packaging, and notes the operating temperature range of -55°C to 135°C.
UHMWPE Rods & Sheets
This document provides property specifications for ultra-high molecular weight polyethylene (UHMWPE) plastics with minimum molecular weights of 9.0 million and 5.0 million. It lists various material properties like density, flammability, water absorption rate, tensile strength, elongation, hardness, melting temperature, thermal conductivity, and service temperature ranges. Properties are specified according to standards like DIN, ISO, ASTM, IEC, along with suitable applications and disclaimer about testing for specific use cases.
UHMWPE rods and Sheet - Pragati Plastics Pvt. Ltd.
This document provides property information for ultra-high molecular weight polyethylene (UHMWPE) materials suitable for food contact applications. It lists various material properties like density, flammability ratings, water absorption rates, tensile strength, elongation percentages, hardness, melting temperature, thermal conductivity, and electrical insulation properties. The UHMWPE has a minimum molecular weight of 9.0 million or 5.0 million, density of 0.93-0.95 g/cm3, and is suitable for applications with service temperatures between -250 to 130 degrees Celsius. The document also includes a disclaimer that the provided values are for reference only and actual performance may vary under complex application conditions.
Shrinktek SK Heat Shrink Tubing - High Temperature Chemical Resistant Heat Sh...
Shrinktek SK Heat Shrink Tubing - High Temperature Chemical Resistant Heat Sh...Thorne & Derrick International
Military Grade Heat Shrink : MIL-DTL 23053/8 DEF STAN 59-97 VG95343
Underwriters Lab : UL 224 VW1
CSA : 600V, 125 Degrees Celsius
Heat Shrink Tubings - Insulate, Protect & Identify
SK high temperature heat shrink provides excellent resistance to abrasion, chemicals and solvents to IEC 60684-2.
Approved to military grade MIL-DTL 23053/8 the SK range of chemical resistant Polyvinylidene Fluoride heat shrink tubing has a shrink ratio of 2:1 and operating temperatures of -55 to 175 Degrees Celsius.
Thorne & Derrick are the largest UK distributor of heat shrink tubings and sleevings including 3M, Panduit, Hellermann Tyton, DSG Canusa, Shrinktek and Thomas & Betts.
Stock lines include thin, medium and thick wall adhesive lined heat shrink sleeves and moulded shapes (heat shrink cable caps, cable breakouts and cable boots) - insulate, seal, protect with heat shrinkable tubing.
Thermobreak Solar - Brochure 230914 D
Thermobreak is a high temperature pipe insulation material for solar heating systems. It is made of crosslinked closed cell polyolefin foam with a reinforced aluminum foil layer and can withstand temperatures up to 160°C. It comes in various thicknesses and sizes to insulate different diameter pipes. Thermobreak has high insulating properties, is resistant to UV light and moisture, and meets international fire safety standards.
SWRS42 10 Cable Repair Kit (Heat Shrink Wraparound)
Wraparound repair sleeves provide an easy solution for repairing damage to cable sheaths. They are used worldwide to protect and seal telecommunication cables and also help seal power cable joints. The document lists various part numbers for sleeves with different exterior diameters and lengths. It also outlines the sleeves' properties like withstanding high temperatures, having high bursting strength and dielectric strength, and good adhesion and shear strength.
Heat Shrink Cable Repair Kits For Damaged BS6883 Offshore Cables
Wraparound repair sleeves provide an easy solution for repairing damage to cable sheaths. They are used worldwide to protect and seal telecommunication cables and also help seal power cable joints. The document lists various part numbers for sleeves with different exterior diameters and lengths. It also outlines the sleeves' properties like withstanding high temperatures, having high bursting strength and dielectric strength, and good adhesion and shear strength.
GTR Profile - F
GulfTrading provides building materials and kitchen equipment to customers. They offer various types of flooring including carpet, wood flooring, and vinyl flooring. They can supply and install the flooring as well. Their products are approved by various government departments. GulfTrading has experience providing products to residential, commercial, educational, healthcare, and other sectors in the UAE.
Uhmwpe sheets
UHMWPE sheets and parts are made from a material with a minimum molecular weight of 5.0 million. This material has a density of 0.93-0.95 g/cm3, water absorption of less than 0.01%, tensile strength of at least 18N/mm2, and elongation of at least 50%. It also has high impact strength, hardness, compressive strength, and thermal conductivity, with low volume and surface resistivity. This material is suitable for use in temperatures from -80 to 80 degrees Celsius and has low coefficients of friction, negligible moisture/solvent absorption, and excellent weather resistance.
Comparison of 2mm HiRel Connectors to the Mil Std
This document summarizes test results for 2mm connectors against MIL-DTL-83513G and MIL-DTL-24308G specifications. Several key tests meet the military specifications, including dielectric withstand voltage, insulation resistance, contact resistance, engagement/separation forces, temperature cycling, vibration, shock, and salt spray. Some tests were not conducted but are expected to meet specifications, such as fluid immersion, thermal vacuum outgassing, and oversize pin exclusion. Tests that did not meet full specifications include dielectric withstand voltage at high altitude, humidity testing, insert retention pressure, and contact retention.
ArmorCote
The ArmorCote coating for u-bolts has been developed over decades using cross-linked polyolefin material. It provides high compressive strength and abrasion resistance while allowing for pipe movement without damage. The UV-stabilized thermoplastic maintains integrity during prolonged sun exposure. Unlike other coatings, ArmorCote resists tearing or unraveling over time. It has been used successfully on offshore pipe hangers since 1984.
Heat Shrink - Commercial Non Flame Retarded Polyolefin - SPN 1.2mm
This document provides specification and ordering information for a non flame-retarded heat shrinkable polyolefin tubing. It lists the product references, commercial grade classification, and test method values for properties like tensile strength, elongation, specific gravity, flammability, corrosion resistance, and water absorption. A table is included that shows the minimum/maximum sizes, wall thicknesses, and standard reel lengths available. Standard colors and packaging are also specified along with ordering instructions and product details like the shrink ratio, temperature range, and shrink temperature.
Company profile of azaran int group 2017
This document provides an overview of products and specifications for various petrochemicals and polymers traded through PetroBourse, an online marketplace. It lists information on grades, properties, and applications for commodities like polyethylene, polypropylene, polyvinyl chloride, bitumen, methanol, urea, sulfur, gasoline, fuel oil, and more. Specification tables are provided for each product outlining test methods and limits for characteristics such as density, purity, viscosity, sulfur content, and more. Countries and regions where the company conducts business are also listed.
DENSO densyl tape | AKBAR TRADING EST
A cold applied tape which remains plastic over a wide temperature range. It is
non-hardening and non-cracking. It is highly resistant to mineral acids, alkalis,
salts and micro-organisms and highly impermeable to water, water vapour and
gases. For the protection of buried or exposed pipes, rods, cables, valves and
metal fittings from corrosion. Waterproofing of cables and thermal insulation.
Nylon 6/6 Data Sheet, Properties
Industrial Plastics Distributor Emco is not only a distributor and wholesales of Nylon sheets, tubes and rods, but also a full fabrication facility.
Taconic RF-60A
RF-60A is an organic-ceramic laminate material produced by Taconic. It exhibits low moisture absorption, dimensional stability, and a stable dielectric constant over frequency. RF-60A can be used in applications such as power amplifiers, filters, couplers, passive components, and antennas due to its high flexural strength, low z-axis expansion, and resistance to soldering. The document provides details on RF-60A's properties, compliance standards, processing methods, and ordering information.
Densyl Tape - Waterproofing Tape - Denso Duct Sealing Systems
Densyl Tape is a cold applied waterproofing tape which remains plastic over a wide temperature range - Densyl Tape is non-hardening and non-cracking. Densyl Tape is highly resistant to mineral acids, alkalis, salts and highly impermeable to water, water vapour and gases. Densyl Tape is used to protect underground buried or exposed pipes, rods, cables, valves and metal fittings from corrossion.
Densyl Tape Composition - non-woven synthetic fibre fabric impregnated and coated with a neutral compound based on saturated petroleum hydrocarbons (petrolatum) and insert siliceous fillers.
Functionalized Fluoropolymers For Automotive Applications
AGC's newest additions to its adhesive-grade product lineup provide industry-leading performance across an expanded range of applications in the automotive, oil and gas, chemical, building and construction, packaging and electronics industries. Each is formulated for ease of use within its respective processing environment and is backed by AGC's longstanding reputation as a leading provider of functionalized adhesives.
Similar to Shrinktek Viton heat shrink tubing (20)
Shrinktek SPN Heat Shrink Tubing - Commercial Grade Polyolefin Heat Shrink Tu...
Shrinktek SPN Heat Shrink Tubing - Commercial Grade Polyolefin Heat Shrink Tu...
Shrinktek SPDW Heat Shrink Tubing - Dual Wall Flame Retarded Heat Shrink Tubing
Shrinktek SPDW Heat Shrink Tubing - Dual Wall Flame Retarded Heat Shrink Tubing
UHMWPE rods and Sheet - Pragati Plastics Pvt. Ltd.
UHMWPE rods and Sheet - Pragati Plastics Pvt. Ltd.
Shrinktek SK Heat Shrink Tubing - High Temperature Chemical Resistant Heat Sh...
Shrinktek SK Heat Shrink Tubing - High Temperature Chemical Resistant Heat Sh...
SWRS42 10 Cable Repair Kit (Heat Shrink Wraparound)
SWRS42 10 Cable Repair Kit (Heat Shrink Wraparound)
Heat Shrink Cable Repair Kits For Damaged BS6883 Offshore Cables
Heat Shrink Cable Repair Kits For Damaged BS6883 Offshore Cables
Heat Shrink - Commercial Non Flame Retarded Polyolefin - SPN 1.2mm
Heat Shrink - Commercial Non Flame Retarded Polyolefin - SPN 1.2mm
Densyl Tape - Waterproofing Tape - Denso Duct Sealing Systems
Densyl Tape - Waterproofing Tape - Denso Duct Sealing Systems
Functionalized Fluoropolymers For Automotive Applications
Functionalized Fluoropolymers For Automotive Applications
More from Thorne & Derrick International
Isolation procedures for safe working on electrical systems and equipment by ...
Isolation procedures for safe working on electrical systems and equipment by ...Thorne & Derrick International
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical EqptThorne & Derrick International
Thorne & Derrick International are specialist distributors of low, medium, and high voltage cable installation, jointing, substation, and electrical equipment. They have over 30 years of experience and stock over 100,000 products from over 100 brands. Their product range includes cable joints, terminations, tools, accessories, distribution equipment, and safety products for voltages up to 132kV.The Children North East Annual Golf Day Wednesday 9th May 2018
The document advertises the Children North East Annual Golf Day fundraising event to be held on May 9th, 2018 at Close House golf course in Northumberland. The event will include a shotgun start at 2pm for teams of four playing in a Stableford scoring competition. The £490 entry fee per team includes breakfast, a two course meal after play, and goodie bags. Proceeds will benefit Children North East, a charity supporting children in the Newcastle region.
3M Electrical Products Stocked By Thorne & Derrick International
This document provides information on 3M's electrical products, including electrical connectors, wire connectors, splice kits, wire markers, and protective coatings. It highlights key features and applications of 3M's Scotchlok electrical insulation displacement connectors, Performance Plus wire connectors, direct bury splice kits, ScotchCode wire markers, insulating and anti-corrosion sprays, and Scotchkote electrical coating. The document is intended to showcase 3M's quality solutions for electrical connections, identification, and corrosion protection.
CATU Electrical Safety Catalogue
This document provides a catalogue of products from SICAME GROUP for electrical safety. It begins by emphasizing the importance of electrical safety for professionals working in the electrical industry. The catalogue then outlines the company's commitment to supporting customers through new products designed by their teams, an updated catalogue focusing on product functions and uses, and new educational tools like guidance documents. The bulk of the document consists of the catalogue content organized into sections covering personal protective equipment, locking, signaling, low voltage test and measurement, low voltage earthing systems, low voltage live working tools, medium voltage substation equipment, medium voltage equipment, high voltage lines and switchgear equipment, and earthing connections. Each section lists and provides brief descriptions of the various safety products
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-AThorne & Derrick International
1) The document provides installation instructions for heatshrink termination of 3 core polymeric cables with voltages ranging from 7.2kV to 36kV. It describes the steps for preparing the cable, installing stress control tapes and tubes, cable lugs, and rain sheds.
2) Key steps include removing the cable sheath and screens, applying stress control tape, installing cable lugs and boots, and shrinking tubes onto the assembly. Proper distances must be maintained for phase clearance and bending radii.
3) Outdoor terminations require additional rain sheds installed from the bottom up at specified distances between the anti-track tube and shed edges. Indoor distances between phases and grounds are also outlined.THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...Thorne & Derrick International
THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment.
Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST.
Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...Thorne & Derrick International
The document provides technical specifications for EJB series explosion proof enclosures made of galvanized carbon steel. The enclosures have an IP rating of IP65, IP66, or IP67 and an operating temperature range of -50°C to +60°C. They offer explosion protection of Ex d IIB or IIB+H2 and are suitable for indoor and outdoor use in hazardous industrial areas. The enclosures can house various electrical and electronic components and accessories.Roxtec Cable Transit - B Frame Dimensional Drawing
Roxtec Cable Transit - B Frame Dimensional Drawing
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
This certificate of attendance awards Adam Rowe and Michael Wenglorz for successfully completing a SIL (Safety Integrity Level) training seminar held by PEPPERL+FUCHS GB LTD on November 7th, 2016.
T&D Experts In Equipment For Explosive Atmospheres
Thorne & Derrick were established in 1985 and are now one of the largest specialist distributors and worldwide exporters of equipment for explosive atmospheres. They stock over 100,000 products from over 100 brands for industries such as oil & gas, mining, manufacturing, and more. Thorne & Derrick provide hazardous area lighting, heating, sensors, detectors, valves, cables, and other equipment certified for explosive atmospheres. They also offer technical support, international delivery, and over 30 years of experience in serving hazardous area applications.
Ultrasonic Flow Meters - Customer Specification Demand
This document is an application datasheet for flow measurement devices. It requests contact and process information from customers. It asks for details about the application environment and pipe parameters. It also requests information on process parameters like temperature, pressure, and flow rates. Finally, it inquires about desired measurement configuration including units of measurement, data logging, power supply, and electrical and communication interfaces.
Emtelle Fibre Optic Cables - Product Catalogue 2016
This document provides information on Emtelle fibre optic cables, including:
- An overview of Emtelle as a leading global manufacturer of blown fibre and ducted network solutions.
- Descriptions of different cable types including Direct Install, Direct Buried, Aerial, and more.
- Specifications for various cable models including fibre count options, dimensions, tensile strength and other test standards.
Thorne & Derrick Process Heating Brochure 2016
Thorne & Derrick provide electrical heating solutions for industrial and hazardous area applications. They have over 30 years of experience in process heating and specialize in frost protection and winterization packages. They offer a wide range of electrical heating equipment for hazardous areas, including portable air heaters certified for use in explosive atmospheres. Their product range and engineering expertise help customers solve heating challenges across various industries.
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
Ripley Utility Tool Cable Preparation Tools
The document provides information on tools for preparing electric utility distribution and transmission cables. It includes tools for stripping insulation from secondary distribution cables, mid-span stripping of overhead primary distribution cables, insulation stripping and jacket stripping for underground cables, removing insulation shields from underground and transmission cables, pencilling transmission cables, and other specialty distribution tools. Tables provide part numbers and specifications for various cable end strippers and other tools to prepare different cable types.
RIDGID micro CD100 Combustible Gas Detector
The document describes the RIDGID micro CD-100 combustible gas leak detector. It can quickly identify the presence of combustible gases with a flexible 41 cm probe. It is designed to detect gases like methane, propane, and more. The micro CD-100 has adjustable sensitivity settings and Tri-Mode Detection that provides alerts through visual, audible or vibration signals. It is listed as catalog number 36163 and weighs 0.45 kg.
Itron Fact Sheet
Itron is a leading technology company dedicated to measuring, managing, and analyzing energy and water resources. It provides comprehensive solutions including meters, communication systems, software, and consulting services to over 8,000 customers in more than 100 countries. Itron employs thousands of people globally and invests over 8.5% of its $1.9 billion annual revenue in research and development.
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...Thorne & Derrick International
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration, Air Conditioning & Heat Pumps Technical Options Committee’Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec SheetThorne & Derrick International
The FiloSeal+HD is a duct sealing system that uses hexagonal tubes and a flexible silicon-based sealant to seal cable configurations and pipes within conduits. It provides resistance to up to 2 bars of pressure and can withstand pulling forces of 100kg on sealed cables. The sealant is easily applied and cures with air, providing high levels of gas and water tightness. The system allows for easy addition or removal of cables or pipes as needed.More from Thorne & Derrick International (20)
Isolation procedures for safe working on electrical systems and equipment by ...
Isolation procedures for safe working on electrical systems and equipment by ...
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
THORNE & DERRICK LV MV HV Jointing, Earthing, Substation & Electrical Eqpt
The Children North East Annual Golf Day Wednesday 9th May 2018
The Children North East Annual Golf Day Wednesday 9th May 2018
3M Electrical Products Stocked By Thorne & Derrick International
3M Electrical Products Stocked By Thorne & Derrick International
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
11kV Cable Termination Heat Shrink Kits 3 Core 16-25sqmm SPS 3TIS-12X-A
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
THORNE + DERRICK : LV, MV & HV Cable Installation, Jointing, Substation & Ele...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Ex d Enclosures - Explosion Proof Hazardous Area Technor EJB Galvanised Steel...
Roxtec Cable Transit - B Frame Dimensional Drawing
Roxtec Cable Transit - B Frame Dimensional Drawing
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
Pepperl & Fuchs SIL Training Certificate - T&D Adam Rowe
T&D Experts In Equipment For Explosive Atmospheres
T&D Experts In Equipment For Explosive Atmospheres
Ultrasonic Flow Meters - Customer Specification Demand
Ultrasonic Flow Meters - Customer Specification Demand
Emtelle Fibre Optic Cables - Product Catalogue 2016
Emtelle Fibre Optic Cables - Product Catalogue 2016
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
SIRAI ASCO Numatics Solenoid Valves WRAS Approved - SIRAI L182D L282D
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
United Nations Environment Programme (UNEP) ‘2006 Report of the Refrigeration...
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Filoform FiloSeal+HD Reenterable LV HV Power Cable Duct Seal System - Spec Sheet
Recently uploaded
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
Essentials of Automations: The Art of Triggers and Actions in FME
In this second installment of our Essentials of Automations webinar series, we’ll explore the landscape of triggers and actions, guiding you through the nuances of authoring and adapting workspaces for seamless automations. Gain an understanding of the full spectrum of triggers and actions available in FME, empowering you to enhance your workspaces for efficient automation.
We’ll kick things off by showcasing the most commonly used event-based triggers, introducing you to various automation workflows like manual triggers, schedules, directory watchers, and more. Plus, see how these elements play out in real scenarios.
Whether you’re tweaking your current setup or building from the ground up, this session will arm you with the tools and insights needed to transform your FME usage into a powerhouse of productivity. Join us to discover effective strategies that simplify complex processes, enhancing your productivity and transforming your data management practices with FME. Let’s turn complexity into clarity and make your workspaces work wonders!
20240609 QFM020 Irresponsible AI Reading List May 2024
Everything I found interesting about the irresponsible use of machine intelligence in May 2024
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
UiPath Test Automation using UiPath Test Suite series, part 5
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
Communications Mining Series - Zero to Hero - Session 1
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
Imagine a world where machines not only perform tasks but also learn, adapt, and make decisions. This is the promise of Artificial Intelligence (AI), a technology that's not just enhancing our lives but revolutionizing entire industries.
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
Recently uploaded (20)
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Essentials of Automations: The Art of Triggers and Actions in FME
Essentials of Automations: The Art of Triggers and Actions in FME
20240609 QFM020 Irresponsible AI Reading List May 2024
20240609 QFM020 Irresponsible AI Reading List May 2024
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
UiPath Test Automation using UiPath Test Suite series, part 5
UiPath Test Automation using UiPath Test Suite series, part 5
Communications Mining Series - Zero to Hero - Session 1
Communications Mining Series - Zero to Hero - Session 1
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
AI 101: An Introduction to the Basics and Impact of Artificial Intelligence
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
Shrinktek Viton heat shrink tubing
- 1. WWW.CABLEJOINTS.CO.UK THORNE & DERRICK UK Viton® TEL 0044 191 490 1547 FAX 0044 477 5371 TEL 0044 117 977 4647 FAX 0044 977 5582 WWW.THORNEANDDERRICK.CO.UK High Temperature Chemical Resistant Heat Shrinkable Tubing Specification Values PROPERTY TEST METHOD Tensile Strength ISO 37 10.3 MPa minimum Ultimate Elongation ISO 37 250% minimum Specific Gravity ISO 1183 1.95 maximum Heat Shock ASTM D2671 (4hrs at 300˚C) no dripping, cracking or flowing Heat Ageing ISO 188 (168hrs at 250˚C) Ultimate Elongation VALUES ISO 37 200% minimum Low Temperature Flexibility ASTM D2671 (4hrs at -55˚C) no cracking Flammability ASTM D876 pass Electric Strength IEC 243-1 6KV/mm minimum Corrosion (Copper Contact and Copper Mirror) ASTM D2671 no corrosion Water Absorption ISO 62 0.5% maximum Fluid Resistance ISO 1817 Gasoline Lubricating Oil Hydraulic Fluid Water Tensile Strength ISO 37 Ultimate Elongation Fungus Resistance ISO 846 Specification References/Approvals TYPE SHRINKTEK MILITARY Viton® ST6011 AMS-DTL-23053/13 DEF STAN 59-97 Type 4A VG95343 Pt 5 Type D Viton® is a registered trademark of DuPont Dow Elastomers 32 8.8 MPa minimum 250% minimum no fungal growth
- 2. • • Shrink Ratio 2:1 • • Shrink Temperature 175˚C Operating Temperature Range -55˚C to 200˚C Resistance to fuels, lubricants, acids and solvents at high temperatures makes it suitable for many varied applications Ordering Data ORDERING SIZE ins MINIMUM EXPANDED DIAMETER MAXIMUM RECOVERED DIAMETER NOMINAL RECOVERED WALL mm STANDARD REEL LENGTH mm ins mm ins mm ins ft m 1/ 8 3.2 0.125 3.2 0.062 1.6 0.030 0.76 165 50 3/ 16 4.8 0.187 4.8 0.093 2.4 0.033 0.84 165 50 1/ 4 6.4 2.50 6.4 0.125 3.2 0.035 0.89 165 50 3/ 8 9.5 0.375 9.5 0.187 4.8 0.040 1.02 165 50 1/ 2 12.7 0.500 12.7 0.250 6.4 0.048 1.22 100 30 3/ 4 19.1 0.750 19.1 0.375 9.5 0.057 1.45 100 30 1 25.4 1.000 25.4 0.500 12.7 0.070 1.78 100 30 38.1 1.500 38.1 0.750 19.0 0.095 2.41 50 15 50.8 2.000 50.8 1.000 25.4 0.110 2.79 50 15 1 2 1/ 2 Standard Colours: black To order: specify product part number, size and colour (e.g. Viton ® Viton® Standard Packaging: on reels (see table for lengths) 3.2 BLK) WWW.CABLEJOINTS.CO.UK THORNE & DERRICK UK TEL 0044 191 490 1547 FAX 0044 477 5371 TEL 0044 117 977 4647 FAX 0044 977 5582 WWW.THORNEANDDERRICK.CO.UK 33