Download as PDF, PPTX
Uploaded byRussell Cantos
SHOP_DRAWING Hand Grinder
This document contains 11 revisions of engineering drawings for a hand grinder. The drawings include detailed dimensions and tolerances for 25 individual parts that make up the hand grinder assembly. A parts list is provided that includes the name and quantity of each unique part.
In this document
Powered by AI
Introduces the Hand Grinder with details on size, revisions, and a parts list including dimensions.
Presents detailed structural dimensions and assembly instructions for the Housing Base and Cover.
Describes key components like the Gear, Woodruff Key, and Handle, including specifications and assembly details.
Lists final parts including Grind Wheel, Taper Pin, and Socket Head Bolt with their respective dimensions.
SHOP_DRAWING Hand Grinder
- 1. DRAWN RUSSELL CANTOS CHECKED SAMIR AWAD 27/02/2006 HANDGRINDER SIZE REV 1 MODULE 21 DATE FILE NAME Hand Grinder.idw DRAWING TITLE: SCALE SHEET OFA 1:2 11 11 ROSEMOUNT TECHNOLOGY CENTRE 3737 BEAUBIEN EAST MONTREAL QUEBEC H1X 1A2 ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE SPECIFIED 10.375 10.088 5.500 4.776
- 2. DRAWN RUSSELL CANTOS CHECKED SAMIR AWAD 27/02/2006 HANDGRINDER SIZE REV 2 MODULE 21 DATE FILE NAME Hand Grinder.idw DRAWING TITLE: SCALE SHEET OFA N/A 11 11 ROSEMOUNT TECHNOLOGY CENTRE 3737 BEAUBIEN EAST MONTREAL QUEBEC H1X 1A2 ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE SPECIFIED Parts List ITEM QTY PART DESCRIPTION 1 1 Housing Base 5.50 x 1.75 x 6.56 2 1 Housing Cover 5.50 x 2.125 x 6.56 3 1 Gear Shaft 1.125 DIA. x 3.448 4 4 Shaft Bushing 1.000 DIA. x 0.781 5 1 Crank 4.750 x 0.625 x1.000 6 1 Clamp Cap 1.000 DIA. x 0.8125 7 3 Woodruff Key #405 0.125 x 0.237 x 0.606 8 1 Clamp Knob 2.000 DIA. x 0.875 9 1 Clamp Screw 0.500 DIA. x 3.625 10 1 Handle 0.875 DIA. x 3.375 11 1 Tool Rest 2.750 x 0.975 x 1.125 12 1 Handle Pin 0.21875 DIA. x 4.000 13 1 Tool Rest Arm 3.908 x 1.250 x 0.250 14 1 Pinion 12/48, 2.5 15 1 Gear 12/48, 2.5 16 1 Carriage Washer 1/4x0.5 17 2 #0 Taper Pin #1x1-1/4 18 1 Wing Nut 1/4-20 UNC, Light, Type A 19 1 Carriage Bolt Round Head,1/4x0.5 20 2 Flat Head Screw #25-24UNC-2B 21 5 Socket Head Bolt 1/4 x 1 22 1 Grind Wheel 6.500 DIA. x 1.500 23 1 Wheel Flange 2 2.000 DIA. x 0.125 24 1 Wheel Flange 1 2.000 DIA. x 0.625 25 1 Wheel Knob 1.608 DIA. X 1.125
- 3. DRAWN RUSSELL CANTOS CHECKED SAMIR AWAD 27/02/2006 HANDGRINDER SIZE REV 3 MODULE MODULE 21 DATE FILE NAME Hand Grinder.idw DRAWING TITLE: SCALE SHEET OFA N/A 11 11 ROSEMOUNT TECHNOLOGY CENTRE 3737 BEAUBIEN EAST MONTREAL QUEBEC H1X 1A2 ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE SPECIFIED Parts List ITEM QTY PART 1 1 Housing Base 2 1 Housing Cover 3 1 Gear Shaft 4 4 Shaft Bushing 5 1 Crank 6 1 Clamp Cap 7 3 Woodruff Key #405 8 1 Clamp Knob 9 1 Clamp Screw 10 1 Handle 11 1 Tool Rest 12 1 Handle Pin 13 1 Tool Rest Arm 14 1 Pinion 15 1 Gear 16 1 Carriage Washer 17 2 #0 Taper Pin 18 1 Wing Nut 19 1 Carriage Bolt 20 2 Flat Head Screw 21 5 Socket Head Bolt 22 1 Grind Wheel 23 1 Wheel Flange 2 24 1 Wheel Flange 1 25 1 Wheel Knob 1514 1 4 5 1210 7 13 2 18 6 2423 9 11 21 17 3 8 25 20 19 16 NOTE: NOT DRAWN TO SCALE
- 4. DRAWN RUSSELL CANTOS CHECKED SAMIR AWAD 27/02/2006 HANDGRINDER SIZE REV 4 MODULE 21 DATE FILE NAME Hand Grinder.idw DRAWING TITLE: SCALE SHEET OFA 1:2 11 11 ROSEMOUNT TECHNOLOGY CENTRE 3737 BEAUBIEN EAST MONTREAL QUEBEC H1X 1A2 ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE SPECIFIED A A B B 1.000 2.935 2.939 1.938 R0.250 2.250 2.250 1.500 1.500 R2.500 R2.750 1.373 1.377 2.498 2.502 R0.188 R1.313 0.998 1.002 1.498 1.502 1.3751.625 0.250 TYP. R0.375 #26 DRILL & REAM IN ASSEMBLY FOR # 1x1-1/4 TAPER PIN - 2HOLES # 7 DRILL 1/4 20-UNC-2B 5/8 DEEP - 5HOLES 1.250 1.375 R0.375 R0.377 R0.047 3.500 0.8745n 0.8755 REAM 2HOLES 1.188 R1.063 R0.500 R0.563 0.281 0.594 0.906 1.188 SECTION A-A SECTION B-B SCALE 2:1 NOTES: FILLETS & ROUNDS 1/8R EXCEPT AS SHOWN 0.375 R0.063 0.125 1. HOUSING BASE
- 5. DRAWN RUSSELL CANTOS CHECKED SAMIR AWAD 27/02/2006 HANDGRINDER SIZE REV 5 MODULE 21 DATE FILE NAME Hand Grinder.idw DRAWING TITLE: SCALE SHEET OFA 1:2 11 11 ROSEMOUNT TECHNOLOGY CENTRE 3737 BEAUBIEN EAST MONTREAL QUEBEC H1X 1A2 ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE SPECIFIED D D E E 2.125 R0.500 0.250 0.750 1.500 R0.500 1.875 2.000 5.500 R0.375 0.688 1.375 1.000 1.938 1.500 0.750 2.250 2.250 1.250 0.750 0.250 0.750 1.000 TYP. R0.188 R0.188 9/32 DRILL-9/16 SPOTFACE 5HOLES 0.125R0.094 SECTION E-E SECTION D-D 0.8745n 0.8755 REAM 2HOLES n0.875 3.750 3.500 0.375 0.625 0.500 1.500 0.375 R0.188 R0.500 0.563 0.250 R0.188 1.250 R2.500 R2.750 R0.375 R0.250 R0.250 R0.188 R1.313 R0.688 1.373 1.377 1.9375 2.935 2.9390.998 1.002 #26 DRILL & REAM IN ASSEMBLY FOR #1x1-1/4 TAPER PIN-2HOLES #25 DRILL-10-24 UNC-2B 2HOLES 2. HOUSING COVER NOTES: FILLETS & ROUNDS 1/8R EXCEPT AS SHOWN
- 6. DRAWN RUSSELL CANTOS CHECKED SAMIR AWAD 27/02/2006 HANDGRINDER SIZE REV 6 MODULE 21 DATE FILE NAME Hand Grinder.idw DRAWING TITLE: SCALE SHEET OFA 1:1 11 11 ROSEMOUNT TECHNOLOGY CENTRE 3737 BEAUBIEN EAST MONTREAL QUEBEC H1X 1A2 ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE SPECIFIED F F G G 1.3753.250 0.250 4.171 4.1614.000PD 0.250 0.813 0.738 0.742 0.780 0.784 2.813 5.147 0.6240 0.6235 1.000 0.495n 0.490 0.6240n 0.6235 1.171 1.161 0.3125 SECTION G-G SCALE 2:1 15. GEAR 48 TEETH 12 INCH DIA. PITCH 14.5 DEGREE PRESSURE ANGLE 14. PINION 12 TEETH 12 INCH DIA. PITCH 14.5 DEGREE PRESSURE ANGLESECTION F-F KEYWAY 1/8 WIDE x 1/16 DEEP #405 WOODRUFF KEYSEAT SEE SECTION G-G FOR DETAIL KEYWAY 1/8 WIDE x 1/16 DEEP 0.606 R0.3125 0.125 0.2370 7. WOODRUFF KEY #405
- 7. DRAWN RUSSELL CANTOS CHECKED SAMIR AWAD 27/02/2006 HANDGRINDER SIZE REV 7 MODULE 21 DATE FILE NAME Hand Grinder.idw DRAWING TITLE: SCALE SHEET OFA 1:1 11 11 ROSEMOUNT TECHNOLOGY CENTRE 3737 BEAUBIEN EAST MONTREAL QUEBEC H1X 1A2 ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE SPECIFIED 0.781 0.123 0.127 n1.000 0.8770n 0.8760 0.6245n 0.6255 n1.750 n0.500 n2.000 R0.125 0.188 0.094 2.320 2.325 0.938 3.448 n1.750 R0.250 n2.000n0.875 0.625 R0.125 R0.125 0.156 1.125 n0.875 0.625 1.608 n0.500 n0.875 n1.125 0.6240n 0.6235 0.499n 0.498 #405 WOODRUFF KEYSEAT 1/2-13 UNC-2A 1/16x45 DEGREES CHAMFER (FOR HEX JAM NUT) KEYWAY 1/8 WIDE x 1/16 DEEP R0.750 25. WHEEL KNOB 4. BUSHING 23. WHEEL FLANGE 224. WHEEL FLANGE 1 3. GEAR SHAFT NOTE: ONE FLANGE WITH KEYWAY ONLY
- 8. DRAWN RUSSELL CANTOS CHECKED SAMIR AWAD 27/02/2006 HANDGRINDER SIZE REV 8 MODULE 21 DATE FILE NAME Hand Grinder.idw DRAWING TITLE: SCALE SHEET OFA 1:1 11 11 ROSEMOUNT TECHNOLOGY CENTRE 3737 BEAUBIEN EAST MONTREAL QUEBEC H1X 1A2 ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE SPECIFIED J J R0.500 0.625 0.750 n0.500 4.750 0.188 0.125 0.250 0.375 3/16 DRILL-90 DEGREE CSK TO 11/32D 4.000 0.125 0.625 KEYWAY 1/8 WIDE x 1/16 DEEP SECTION J-J 0.2495R0.2505 REAM 0.125 n0.433 R1.375 R2.375 4.000 2.584 0.082 2.917 3.374 n0.898 n0.438 n0.219 0.625 R0.250 n0.433 n0.219 12. HANDLE PIN 10. HANDLE 5. CRANK NOTE: FILLETS & ROUNDS 1/8R
- 9. DRAWN RUSSELL CANTOS CHECKED SAMIR AWAD 27/02/2006 HANDGRINDER SIZE REV 9 MODULE 21 DATE FILE NAME Hand Grinder.idw DRAWING TITLE: SCALE SHEET OFA 1:1 11 11 ROSEMOUNT TECHNOLOGY CENTRE 3737 BEAUBIEN EAST MONTREAL QUEBEC H1X 1A2 ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE SPECIFIED n1.000 0.118 0.636 0.094 0.325 0.750 0.375 R0.125 R0.063 0.095 R0.375 R0.281 3.625 0.875 2.188 0.222 n0.500 0.3735n 0.3725 R0.125 R0.188 R0.375 n0.211 n0.481 #24 DRILL & REAM FOR #1x1 TAPER PIN 1/2-13 UNC-2A R1.000 0.3745n 0.3755 REAM n1.000 0.875 0.375 KNURL NOTE: BREAK ALL CORNERS 6. CLAMP CAP 9. CLAMP SCREW 8. CLAMP KNOB 0.8125
- 10. DRAWN RUSSELL CANTOS CHECKED SAMIR AWAD 27/02/2006 HANDGRINDER SIZE REV 10 MODULE 21 DATE FILE NAME Hand Grinder.idw DRAWING TITLE: SCALE SHEET OFA 1:1 11 11 ROSEMOUNT TECHNOLOGY CENTRE 3737 BEAUBIEN EAST MONTREAL QUEBEC H1X 1A2 ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE SPECIFIED 0.975 0.750 0.375 2.750 0.313 2.125 R0.063 0.250 0.750 1.100 n0.201 n0.688 0.322 n0.594 0.250 1.395 0.750 0.188 0.250 1.250 2.000 0.312 R0.408 R0.500 0.250 0.500 1.000 1.000 0.500 0.065 11. TOOL REST ARM 11. TOOL REST 0.569 0.322 18. WING NUT 16. CARRIAGE WASHER 19. CARRIAGE BOLT 3.908 NOTE: FILLETS & ROUNDS 1/8R n0.500 1.000 0.250 n0.194 R0.156 20. FLAT HEAD SCREW 7/32 DRILL-82 DEGREE CSK TO 13/32D 2 HOLES FOR (#10x5/8) 16/64 DRILL 2 HOLES
- 11. DRAWN RUSSELL CANTOS CHECKED SAMIR AWAD 27/02/2006 HANDGRINDER SIZE REV 11 MODULE 21 DATE FILE NAME Hand Grinder.idw DRAWING TITLE: SCALE SHEET OFA N/A 11 11 ROSEMOUNT TECHNOLOGY CENTRE 3737 BEAUBIEN EAST MONTREAL QUEBEC H1X 1A2 ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE SPECIFIED 22. GRIND WHEEL SCALE 1:2 17. TAPER PIN SCALE 2:1 21. SOCKET HEAD BOLT SCALE 2:1 n6.500 1.500 1.250 n0.147 n0.370 1.247 n0.250 1.000 n0.092 n0.500