Fiber-to-Fiber media converters extend network distance by converting wavelengths (1310 to 1550), amplifying optical power. POWERLINK transponders as re-generators are also an optical – electrical – optical (O-E-O) converter with electrical amplification of the signal by FEC to realize long distances fiber transmission.

1. Shenzhen Powerlink Electronic
Technology -Fiber Media Converter

2. 2 Ports XFP to XFP 10G OEO Converter Transponder w/full 3R
Support Standalone
Features
10G Transparent Transponders for Ethernet, SDH ,
Fiber Channel, OTN, digital video, others.
3R Repeater/Regenaration with FEC(Reed-
Solomon Algorithms) for SDH, Ethernet and Fibre
Channel.
Support DWDM/CWDM transceivers
Configurable operation mode.
Multiple chassis versions: 1RU and 2RU chassis
with 2 slots and with 17 slots.
Compact chassis design.
Redundant and modular power supplies. AC and
DC. In-service replaceable.
Modular filter and fan unit. In-service replaceable.
Powerful Network Management function Web,
SNMP, Console, others
10G OEO Converter Standalone

3. 10GBASE-T Ethernet Media Converter SFP+ Port
Features
Support Jumbo Frame
Transparent Transport and very low delay
Support ITUT prescribed DWDM/CWDM
wavelength
Support DMI function for SFP+ fiber module
Support Loopback test function
Economic In-band Management function
powerful Network Management function(Web
，SNMP，Console etc.)
Support hot plugging
Support 2U Rack (16 channel) and standalone
use
Full State Led display
Easy installation
UTP cable length detection(only RJ45
interface)

4. Fiber optic Ethernet Media Converter a Pair of 10/100/1000M Single
Fiber 1310/1550nm 20km
Features
AutoCross™: Automatically detects and configures the twisted pair port on the
converter to the correct MDI or MDI-X configuration.
Link Pass Through: Link Pass Through is a troubleshooting feature that allows the
media converter to monitor both the fiber and copper RX ports for loss of signal.
Automatic Link Restoration: The media converters will automatically re-establish
link in all network conditions.
Selectable speed setting: The converter can be set to 10Mbps or 100Mbps or
1000Mbps. Both copper and fiber ports are automatically set to the same speed.
Devices connect to duplex mode of link partner.
Jumbo Frames is available for the 10/100/1000M media converter with 1 RJ45 port +
1 fiber po

5. Fiber optic Ethernet Media Converter 10/100M Dual Fiber Multimode
850nm 550m
Features
AutoCross™: Automatically detects and
configures the twisted pair port on the
converter to the correct MDI or MDI-X
configuration.
Link Pass Through: Link Pass Through is a
troubleshooting feature that allows the media
converter to monitor both the fiber and copper
RX ports for loss of signal.
Automatic Link Restoration: The medio
converters will automatically re-establish link
in all network conditions.
Selectable speed setting: The converter can
be set to 10Mbps or 100Mbps. Both copper and
fiber ports are automatically set to the same
speed. Devices connect to duplex mode of link
partner.

6. Gigabit Fiber Media Converter 1000Base Dual Fiber Multi mode
850nm 550m
Features
AutoCross™: Automatically detects and configures the twisted pair port on the converter
to the correct MDI or MDI-X configuration.
Link Pass Through: Link Pass Through is a troubleshooting feature that allows the media
converter to monitor both the fiber and copper RX ports for loss of signal.
Automatic Link Restoration: The media converters will automatically re-establish link in
all network conditions.

7. 1000Base 1SFP+1RJ45 Ports Gigabit SFP Fiber Media Converter
Features
One SFP ports and one SFP sockets ,It can convert Optical-Electric Ethernet signals
between 1000M UTP ports and 1000M optical fiber ports and switch Ethernet signals
between port and port.
Auto negotiation function supports UTP ports to auto 1000M and Full Duplex/Half Duplex.
Broadcast storm protection
Supports VLAN and QoS
Supports the max 1536 bytes frame
Small power consumption (3W), low heat, good stabilit

8. www.powerlinksz.com
Tel：86-755-33160443
Fax：86-755-22142476
E-mail：sallykuang@powerlinksz.com.cn
Address：35 Building,HaiTian industrial park
,PingDi Town,LongGang,ShenZhen,China