Best ppt on friction explaination, types of friction ,advantage & disadvantage of friction.effects of friction, methods of increacing and reducing friction,with example
2. Friction[introduction]
Friction is a force that opposes the relative motion
between two surfaces of objects in contact. The force of
friction always acts in a direction opposite to that of the
applied force. Friction exists between two surfaces due
to irregularities on the surfaces of the objects in contact,
interlocking of micro-level irregularities of the two
surfaces and ploughing of harder surfaces into smoother
surfaces.
3. For example
Suppose you decide to ride a skateboard.
You push off the ground and start moving.
According to Newton’s First Law of Motion, if no other
forces are acting on your skateboard, you will continue to
move….BUT
What happens?
Your skateboard slows down because of friction.
Friction is the force that opposes motion between two
surfaces that are touching each other.
The amount of friction depends on two things:
Kind of surface.
Forces pressing the surfaces together.
4. Your skateboard slows down because of friction.
Friction is the force that opposes motion between two
surfaces that are touching each other.
The amount of friction depends on two things:
Kind of surface.
Forces pressing the surfaces together.
5. What causes friction
Even though a surface may look smooth, if you magnify
the surface it isn’t smooth.
Everything is made of molecules. The molecules come
together to make bumps. Some surfaces have molecules
that leave large bumps and some leave smaller bumps,
but all surfaces have bumps.
Microwelds occur when two bumpy surfaces are rubbed up
against each other they stick together.
6. Factors That Affect
Friction
• Roughness of the surface
• the extent to which the two surfaces press
together
• Nature of the surface
7. Types of Friction
There are three types of friction that exist between solid surfaces.
They are static friction, sliding friction and rolling friction.
Frictional force that comes into action before the start of the
motion of an object is called static friction. Example: a box
placed on the floor. When an object slides over another surface,
the frictional force that comes into action is sliding friction.
Example: a boy sliding on a slide. The frictional force exerted
when an object rolls over a surface is called rolling friction.
Example: rolling ball on the ground. It is found that:
Rolling friction < sliding friction < static friction.
The frictional force exerted by fluids when objects move through
them is called fluid friction or drag.
8. There are four types of
frictionstatic friction sliding friction
rolling friction Fluid friction
9. Four types of friction and
their definition
Static friction:-when a force is applied to an object
but it does not cause it to move
example: pushing on a wall
Fluid friction:-occurs when a object moves through a
fluid, meaning either a liquid or gas
examples: skydiving, swimming
Sliding friction:-occurs when solid surfaces slide
over each other
example:-falling on the pavement
Rolling friction:-occurs when solid surfaces slide
over each other
example:-falling on the pavement
10. Effects of Friction
Friction produces heat.
Friction causes wear and tear.
Friction opposes motion
11. Advantages of Friction
Friction between pen and paper enables us to write on
the paper.
Friction between our feet and the ground allows our
movements like standing, walking and running
Friction between the surface of the road and tyres of our
vehicles allow the vehicles to move without slipping
12. Disadvantages of Friction
Friction causes moving objects to stop or slow
down.
Friction produces heat causing wastage of
energy in machines
Friction causes wear and tear of moving parts of
macinery, soles of shoes, etc
13. Methods of Increasing and
Reducing Friction
In real life, there are circumstances where we have to
increase the friction and minimize the friction. Friction
can be increased by increasing the roughness of the
surfaces in contact. For example, treading of shoes and
tyres is done to increase friction. When friction is
undesirable we have to reduce the friction. Friction can
be minimized by using lubricants like oil and grease and
by using ball bearing between machine parts. A
substance that is introduced between two surfaces in
contact, to reduce friction, is called a lubricant. Fluid
friction can be minimized by giving suitable shapes to
the objects moving in the fluids.
14. Friction Is A Necessary
Evil
There are instances in daily life where friction is a
necessity. For example, without friction, we cannot hold
objects in our hands; we cannot walk and cannot light a
match stick. Sometimes friction is not desirable, for
example friction between machinery parts, which
causes wear and tear. As friction is advantageous to us it
is considered as a friend but due to its disadvantages it is
a foe. Depending on the circumstance, friction can be a
help or a hindrance. Thus it is a necessary evil.