1. The document discusses sanding and cutting a product made of wood to prepare it for finishing. 2. Several sides of the product were sanded using garnet paper, which the author found boring due to repetition. 3. After sanding, the author cut the sides to different heights using a pull saw, which they found more interesting than sanding.

1. Sanding and cutting the product<br />left99695What you did: Today I have done some sanding and cutting. I have sand my product’s each sides to make it clearly. I have to sand a lot to make my product’s sides clearly. It was really hard to sand them all. After finish sanding all sides, I started to cut them with pull saw. I have to cut them to different height. So I have to concentrate on cutting to different height.<br />-2552700142240Changes to your plan: I was having hard with gluing all the sides before using PVA, so it takes lots of times. But I have finished gluing all of the sides, and I also finished sanding them. Finally, I started to cut them to a different height, so the progress is going well. I think I don’t have to change my plan.<br />Emotions: I was boring while sanding the sides using the garnet paper. The reason why I was boring was because I was doing the same things everyday. But I have finished sanding them, so I started to cut them. And when I start to cut them I feel interesting. Because I was not cutting the woods for long time, and I have just done sanding and gluing.<br />What’s next: I have to cut them all first and then after finish cutting them all, I should move on to coloring them all. <br />Area of Interaction and Learner Profile: I think I was inquirer while cutting my product’s sides. <br />Why: The reason why I think I was inquirer while cutting my product’s sides is because I have enjoyed while cutting them and it was my first time to use pull saw to cut the woods. It was really interesting experience.<br />Tools: Pull saw, Desk Sander<br />