Gluing the starfish’s arms4
•Download as DOCX, PDF•
1 like•128 views
The document describes gluing the sides of a product. It was a difficult job that required concentration to glue the sides accurately without mistakes. The next step will be cutting the top of the product, which will also require focus. Checking the plywood for the sides required thought to ensure proper fitting when gluing.
Report
Share
Report
Share
Recommended
Gluing the starfish’s arms2
The document describes gluing the sides of a product. It was difficult work that required concentration to glue the sides accurately without mistakes. The plan did not need to change as the job was going well. After checking and securing all the sides, the next step will be to cut the top of the product, which will also require focus.
Gluing the starfish’s arms
The document describes gluing the sides of a product. It was a difficult job that required concentration. The plan did not need to change as the gluing was going well. Next steps will be to cut the top of the product, which will also require focus. Checking and gluing the plywood sides accurately made the writer think carefully.
Gluing the starfish’s arms3
The document describes gluing the sides of a product. It was difficult work that required concentration to ensure accurate gluing without mistakes. The plan did not need to change as the work was going well. Cutting the top of the product next will also require focus. Checking the plywood carefully was important for proper fitting when gluing the sides together.
Cutting the starfish shape side4
The student had to cut a new starfish shaped side for their project because they lost one of the materials. They were only able to work on their project for one period so they cut and sanded the new piece. They were upset about losing the material and tired from the cutting work but plan to stick the shaped sides together and change the top shape next. They felt knowledgeable while cutting the plywood because they had learned how to use the tenon saw and wood vice.
Cutting the starfish drawer sides2
The document describes cutting drawer sides from thick pine wood for a product. The writer finished cutting all five needed pieces, which was tiring due to the thickness of the wood. However, completing the cutting provided satisfaction. Next steps involve drawing angles on the pieces so they can be joined together.
Check and sanding the sides before gluing2
The document describes sanding and checking plywood pieces to glue together as sides for a product. However, a mistake was made as the plywood was too short to fit together. This required making new plywood, which was frustrating. Next steps will be to accurately check and glue the plywood sides, then carefully cut the top of the product.
Types of flanges
A flange is an external or internal ridge, or rim, for strength, as the flange of an iron beam such as an I-beam or a T-beam; or for attachment to another object, as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera; or for a flange of a rail car or tram wheel.
Recommended
Gluing the starfish’s arms2
The document describes gluing the sides of a product. It was difficult work that required concentration to glue the sides accurately without mistakes. The plan did not need to change as the job was going well. After checking and securing all the sides, the next step will be to cut the top of the product, which will also require focus.
Gluing the starfish’s arms
The document describes gluing the sides of a product. It was a difficult job that required concentration. The plan did not need to change as the gluing was going well. Next steps will be to cut the top of the product, which will also require focus. Checking and gluing the plywood sides accurately made the writer think carefully.
Gluing the starfish’s arms3
The document describes gluing the sides of a product. It was difficult work that required concentration to ensure accurate gluing without mistakes. The plan did not need to change as the work was going well. Cutting the top of the product next will also require focus. Checking the plywood carefully was important for proper fitting when gluing the sides together.
Cutting the starfish shape side4
The student had to cut a new starfish shaped side for their project because they lost one of the materials. They were only able to work on their project for one period so they cut and sanded the new piece. They were upset about losing the material and tired from the cutting work but plan to stick the shaped sides together and change the top shape next. They felt knowledgeable while cutting the plywood because they had learned how to use the tenon saw and wood vice.
Cutting the starfish drawer sides2
The document describes cutting drawer sides from thick pine wood for a product. The writer finished cutting all five needed pieces, which was tiring due to the thickness of the wood. However, completing the cutting provided satisfaction. Next steps involve drawing angles on the pieces so they can be joined together.
Check and sanding the sides before gluing2
The document describes sanding and checking plywood pieces to glue together as sides for a product. However, a mistake was made as the plywood was too short to fit together. This required making new plywood, which was frustrating. Next steps will be to accurately check and glue the plywood sides, then carefully cut the top of the product.
Types of flanges
A flange is an external or internal ridge, or rim, for strength, as the flange of an iron beam such as an I-beam or a T-beam; or for attachment to another object, as the flange on the end of a pipe, steam cylinder, etc., or on the lens mount of a camera; or for a flange of a rail car or tram wheel.
Se desconoce paradero de normalistas en Guerrero
Un enfrentamiento entre policías municipales de Iguala y estudiantes de la Escuela Normal Rural de Ayotzinapa en Guerrero dejó como saldo 43 estudiantes desaparecidos y 6 muertos. Los policías atacaron a los autobuses donde se transportaban los estudiantes la noche del 26 de septiembre. Más tarde, cuando los estudiantes se reunieron con la prensa para informar sobre el incidente, fueron atacados nuevamente, dejando 2 muertos y 4 heridos. Las autoridades investigan el paradero de los 43 estudiantes des
Chapter 01
The document summarizes key aspects of the PIC18 microcontroller including its features, memory organization, registers, and instruction set. It provides an overview of the PIC18's 8-bit CPU, program memory up to 128KB, SRAM up to 4KB, and peripheral functions. The summary describes the separation of the PIC18's program and data memories, its banked memory architecture, and addresses of important registers like the WREG, STATUS, and BSR registers.
Southern Health & Social Care Trust Case Study
The document discusses how Southern Health & Social Care Trust in Northern Ireland used The Productive Series e-learning modules to train staff. The e-learning modules provided a flexible way to train more staff in an organization where only a few could attend workshops in person. Feedback from staff who completed the e-learning was overwhelmingly positive. The head of continuous improvement found the pilot of the e-learning so beneficial that she decided to roll it out more widely across the Trust. The e-learning helped more staff understand The Productive Series approach and feel ownership over projects rather than seeing it as the responsibility of just a few workshop attendees. It also helped prepare staff who would be more involved by allowing them to understand the theory in advance of workshops
Y qué pasa con el resto de
El documento cuestiona la veracidad de las imágenes que se muestran a la gente y sugiere que algunas pueden ser falsas y no corresponderse con la realidad, preguntando por qué se les muestran imágenes falsas en lugar de la verdad.
Note Servicing
Payment Automation Network offers comprehensive note servicing that manages all types of loans. Their services include collecting payments through automatic bank drafts, sending tax forms and statements, tracking loan amortization, and handling escrow collections. They provide accounting services like computing principal and interest, and accept payments by phone or mail while applying them based on the client's preferences. Pricing depends on loan volume but has no minimums or maximums.
Alternative press
Jason Pettigrew is the editor of Alternative Press magazine, which was first published in 1985. The target audience is people who like rock music, as the magazine covers new rock albums, bands, and music industry news. It attracts readers by featuring famous rock band members on the cover.
Task 5
This document discusses strategies for targeting a teen audience aged 14-18 for the film "U.S.B". The film is a teen drama. Key elements that appeal to teens include urban styled clothing of the main characters, a popular rap song on the soundtrack, and promoting the film on social media platforms popular with teens like Twitter. Feedback from peers and teachers on a rough cut helped improve editing, sound, and use of mise-en-scene elements. The film was uploaded to video sites like Vimeo and shared on social media to reach the intended teen audience.
Tomado de
Los niños de hoy en día prefieren los juegos tecnológicos en lugar de los juegos tradicionales, debido a que están más expuestos a la tecnología. Mientras que los juegos electrónicos pueden tener beneficios como estimular la coordinación motora, también pueden aislar a los niños del mundo real y dificultar el desarrollo de habilidades sociales. Los expertos recomiendan que los padres establezcan límites sobre el uso de la tecnología y aseguren que los niños participen en actividades
Certificate 3
This certificate recognizes Badreiddine Mansouri for successfully completing the Total Ownership Experience Fundamentals eLearning course on May 6, 2013. It was issued by Infiniti and signed by the Business Manager of Infiniti Sales & Network Development-ME and the director of the IREDI Centre in Muscat, Oman.
Measuring and mark out the starfish shape1
The document summarizes a student's progress on a woodworking project to create a starfish shaped product. It describes measuring and marking out the sides of the product on plywood, but not finishing the cutting. It also details changing the design to include angles on the product to make it easier to construct based on advice from their teacher. The student felt frustrated with the original design but changing it to include angles improved their progress.
Check sides and sanding before stick them1
The author checked and sanded the sides of plywood pieces before gluing them together to construct the sides of a product. This was a tiring process that required ensuring each piece fit accurately, as any that did not would have to be remade. With the sides completed, the next step is to carefully cut the top of the product. The author felt well-balanced having finished checking and sanding the plywood pieces in the allotted class time.
Cutting and stick together the drawer sides
The student cut angles into five pieces of pine wood to make drawer sides. This was difficult work that required accuracy. By the end of the class, the student had finished cutting the angles and gluing the drawer sides together. They feel they are making their project faster than expected and are pleased with their progress. Next, they will attach the drawer sides to the rest of the project.
Cutting the starfish drawer sides1
The document describes the progress made in constructing drawer sides for a starfish shaped product. It details sanding plywood to create the product sides, then measuring, marking and cutting pine wood to create matching drawer sides. The creator felt satisfied achieving their goals for the week and looking forward to finishing the drawer sides by checking sizes are accurate.
Check and sanding the sides before gluing3
The document describes sanding and checking plywood pieces to glue together as sides for a product. However, a mistake was made as the plywood was too short. The author will need to make new plywood pieces and remains sad about the additional work. Next they will cut the top of the product, which is expected to be difficult.
Cutting and sanding my product
The document describes the process of cutting and sanding a product to different heights. The person cut the product to different heights using a pull saw, then sanded all sides and the top with garnet paper to make it smooth, which took a lot of effort. They are satisfied with finishing the cutting and almost completing the sanding. The next steps will be to finish sanding on Friday and then erase any pencil marks.
Measuring and mark out starfish shape
The document summarizes measuring and marking out a starfish shape. It describes cutting a plywood sheet to 95 x 95 x 5 dimensions and then cutting it into a circular shape. The author felt making the product was fun and enjoyed the process, though cutting the plywood was a bit difficult. The next steps outlined are to measure and mark the product's base.
Cutting the starfish shape1
The document summarizes the progress made on a craft project to cut out starfish shaped sides. It discusses measuring and marking out 26 sides, cutting 10 sides which was tiring work, but provided stress relief. The next steps are to finish cutting the remaining sides and then check if they can be assembled correctly. Tools used include a tenon saw, plywood, wood vice and bench hook.
Sanding and cutting the product
1. The document discusses sanding and cutting a product made of wood to prepare it for finishing.
2. Several sides of the product were sanded using garnet paper, which the author found boring due to repetition.
3. After sanding, the author cut the sides to different heights using a pull saw, which they found more interesting than sanding.
Cutting the starfish’s drawer sides 3
The document summarizes cutting pine wood pieces to make drawer sides for a product. It describes marking angles on 5 pieces of pine wood and cutting them to the angles. It notes the plan does not need to change but the drawer sides need to be glued together next. It expresses the cutting was difficult and hurt the shoulder due to the thickness of the pine wood requiring shoulder strength to cut. The next steps are to check the pieces fit together and glue them.
Process journal
The student has been working on creating a moving toy of a rabbit on a skateboard over several workshop sessions. In this session, the student used a coping saw to cut out the shape of the rabbit's body and head from wood. The student realized they needed to turn the wood while cutting to ensure an accurate shape. The next steps will be to cut the rabbit's legs and finish drawing a skateboard design.
Dt process journal
The student worked on assembling their tree bookshelf project. They measured, cut, and joined various parts using tools like saws, drills, and clamps. This included cutting the base, sides, and shelf pieces to size. Holes were drilled and parts were joined with glue and screws. The student encountered some challenges along the way and made adjustments to their plan and process based on what they were learning.
1 whole pj
The student worked on connecting the handle and body parts of their toy project. They cut a small piece at the back of the toy's body to allow the handle to connect. Using a drill and screw, they connected the two pieces together after applying a small amount of glue. They then filed the connection area to smooth it. The next steps will be finishing holes for wheels and adding wheels so the toy can roll properly.
More Related Content
Viewers also liked
Se desconoce paradero de normalistas en Guerrero
Un enfrentamiento entre policías municipales de Iguala y estudiantes de la Escuela Normal Rural de Ayotzinapa en Guerrero dejó como saldo 43 estudiantes desaparecidos y 6 muertos. Los policías atacaron a los autobuses donde se transportaban los estudiantes la noche del 26 de septiembre. Más tarde, cuando los estudiantes se reunieron con la prensa para informar sobre el incidente, fueron atacados nuevamente, dejando 2 muertos y 4 heridos. Las autoridades investigan el paradero de los 43 estudiantes des
Chapter 01
The document summarizes key aspects of the PIC18 microcontroller including its features, memory organization, registers, and instruction set. It provides an overview of the PIC18's 8-bit CPU, program memory up to 128KB, SRAM up to 4KB, and peripheral functions. The summary describes the separation of the PIC18's program and data memories, its banked memory architecture, and addresses of important registers like the WREG, STATUS, and BSR registers.
Southern Health & Social Care Trust Case Study
The document discusses how Southern Health & Social Care Trust in Northern Ireland used The Productive Series e-learning modules to train staff. The e-learning modules provided a flexible way to train more staff in an organization where only a few could attend workshops in person. Feedback from staff who completed the e-learning was overwhelmingly positive. The head of continuous improvement found the pilot of the e-learning so beneficial that she decided to roll it out more widely across the Trust. The e-learning helped more staff understand The Productive Series approach and feel ownership over projects rather than seeing it as the responsibility of just a few workshop attendees. It also helped prepare staff who would be more involved by allowing them to understand the theory in advance of workshops
Y qué pasa con el resto de
El documento cuestiona la veracidad de las imágenes que se muestran a la gente y sugiere que algunas pueden ser falsas y no corresponderse con la realidad, preguntando por qué se les muestran imágenes falsas en lugar de la verdad.
Note Servicing
Payment Automation Network offers comprehensive note servicing that manages all types of loans. Their services include collecting payments through automatic bank drafts, sending tax forms and statements, tracking loan amortization, and handling escrow collections. They provide accounting services like computing principal and interest, and accept payments by phone or mail while applying them based on the client's preferences. Pricing depends on loan volume but has no minimums or maximums.
Alternative press
Jason Pettigrew is the editor of Alternative Press magazine, which was first published in 1985. The target audience is people who like rock music, as the magazine covers new rock albums, bands, and music industry news. It attracts readers by featuring famous rock band members on the cover.
Task 5
This document discusses strategies for targeting a teen audience aged 14-18 for the film "U.S.B". The film is a teen drama. Key elements that appeal to teens include urban styled clothing of the main characters, a popular rap song on the soundtrack, and promoting the film on social media platforms popular with teens like Twitter. Feedback from peers and teachers on a rough cut helped improve editing, sound, and use of mise-en-scene elements. The film was uploaded to video sites like Vimeo and shared on social media to reach the intended teen audience.
Tomado de
Los niños de hoy en día prefieren los juegos tecnológicos en lugar de los juegos tradicionales, debido a que están más expuestos a la tecnología. Mientras que los juegos electrónicos pueden tener beneficios como estimular la coordinación motora, también pueden aislar a los niños del mundo real y dificultar el desarrollo de habilidades sociales. Los expertos recomiendan que los padres establezcan límites sobre el uso de la tecnología y aseguren que los niños participen en actividades
Certificate 3
This certificate recognizes Badreiddine Mansouri for successfully completing the Total Ownership Experience Fundamentals eLearning course on May 6, 2013. It was issued by Infiniti and signed by the Business Manager of Infiniti Sales & Network Development-ME and the director of the IREDI Centre in Muscat, Oman.
Viewers also liked (9)
Similar to Gluing the starfish’s arms4
Measuring and mark out the starfish shape1
The document summarizes a student's progress on a woodworking project to create a starfish shaped product. It describes measuring and marking out the sides of the product on plywood, but not finishing the cutting. It also details changing the design to include angles on the product to make it easier to construct based on advice from their teacher. The student felt frustrated with the original design but changing it to include angles improved their progress.
Check sides and sanding before stick them1
The author checked and sanded the sides of plywood pieces before gluing them together to construct the sides of a product. This was a tiring process that required ensuring each piece fit accurately, as any that did not would have to be remade. With the sides completed, the next step is to carefully cut the top of the product. The author felt well-balanced having finished checking and sanding the plywood pieces in the allotted class time.
Cutting and stick together the drawer sides
The student cut angles into five pieces of pine wood to make drawer sides. This was difficult work that required accuracy. By the end of the class, the student had finished cutting the angles and gluing the drawer sides together. They feel they are making their project faster than expected and are pleased with their progress. Next, they will attach the drawer sides to the rest of the project.
Cutting the starfish drawer sides1
The document describes the progress made in constructing drawer sides for a starfish shaped product. It details sanding plywood to create the product sides, then measuring, marking and cutting pine wood to create matching drawer sides. The creator felt satisfied achieving their goals for the week and looking forward to finishing the drawer sides by checking sizes are accurate.
Check and sanding the sides before gluing3
The document describes sanding and checking plywood pieces to glue together as sides for a product. However, a mistake was made as the plywood was too short. The author will need to make new plywood pieces and remains sad about the additional work. Next they will cut the top of the product, which is expected to be difficult.
Cutting and sanding my product
The document describes the process of cutting and sanding a product to different heights. The person cut the product to different heights using a pull saw, then sanded all sides and the top with garnet paper to make it smooth, which took a lot of effort. They are satisfied with finishing the cutting and almost completing the sanding. The next steps will be to finish sanding on Friday and then erase any pencil marks.
Measuring and mark out starfish shape
The document summarizes measuring and marking out a starfish shape. It describes cutting a plywood sheet to 95 x 95 x 5 dimensions and then cutting it into a circular shape. The author felt making the product was fun and enjoyed the process, though cutting the plywood was a bit difficult. The next steps outlined are to measure and mark the product's base.
Cutting the starfish shape1
The document summarizes the progress made on a craft project to cut out starfish shaped sides. It discusses measuring and marking out 26 sides, cutting 10 sides which was tiring work, but provided stress relief. The next steps are to finish cutting the remaining sides and then check if they can be assembled correctly. Tools used include a tenon saw, plywood, wood vice and bench hook.
Sanding and cutting the product
1. The document discusses sanding and cutting a product made of wood to prepare it for finishing.
2. Several sides of the product were sanded using garnet paper, which the author found boring due to repetition.
3. After sanding, the author cut the sides to different heights using a pull saw, which they found more interesting than sanding.
Cutting the starfish’s drawer sides 3
The document summarizes cutting pine wood pieces to make drawer sides for a product. It describes marking angles on 5 pieces of pine wood and cutting them to the angles. It notes the plan does not need to change but the drawer sides need to be glued together next. It expresses the cutting was difficult and hurt the shoulder due to the thickness of the pine wood requiring shoulder strength to cut. The next steps are to check the pieces fit together and glue them.
Process journal
The student has been working on creating a moving toy of a rabbit on a skateboard over several workshop sessions. In this session, the student used a coping saw to cut out the shape of the rabbit's body and head from wood. The student realized they needed to turn the wood while cutting to ensure an accurate shape. The next steps will be to cut the rabbit's legs and finish drawing a skateboard design.
Dt process journal
The student worked on assembling their tree bookshelf project. They measured, cut, and joined various parts using tools like saws, drills, and clamps. This included cutting the base, sides, and shelf pieces to size. Holes were drilled and parts were joined with glue and screws. The student encountered some challenges along the way and made adjustments to their plan and process based on what they were learning.
1 whole pj
The student worked on connecting the handle and body parts of their toy project. They cut a small piece at the back of the toy's body to allow the handle to connect. Using a drill and screw, they connected the two pieces together after applying a small amount of glue. They then filed the connection area to smooth it. The next steps will be finishing holes for wheels and adding wheels so the toy can roll properly.
Similar to Gluing the starfish’s arms4 (13)
More from motorwan
Painting my product
The document summarizes painting a product in the shape of a starfish. The author first planned to paint the outside but realized it would be difficult to then paint the inside, so painted the inside first using white paint. They changed the shape to a starfish so it could have legs to hold pencils. Pink paint was used for the outside to make it more interesting than just red or orange. The author feels excited to finish but was worried about color coordination and mistakes during painting. After painting, the product will be complete.
Painting my product
The document summarizes painting a product in the shape of a starfish. The author first planned to paint the outside but realized it would be difficult to then paint the inside, so painted the inside white first. Most starfish are red or orange, but the author chose to paint the outside pink for variety. After finishing the painting, the product will be complete.
Measuring and mark out starfish sides
The document describes a student's work marking and grinding wood pieces to create a starfish shape. The student marked angles on the wood pieces with a pencil so they could be stuck together accurately. While grinding the wood, the student felt tired from having to hold and sand the pieces by hand. They received a small scratch but were able to continue working. The next steps will be to sand the cut pieces and then stick them together to form the starfish shape.
Mario's adventure
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive functioning. Exercise causes chemical changes in the brain that may help boost feelings of calmness, happiness and focus.
Chapter+9+ +reading+comprehension+questions
The document summarizes political events in the Middle East between 1956-1967. Key events include:
1) In Iraq, the pro-Western government was overthrown in 1958, replacing it with an anti-Western regime allied with Egypt and the USSR.
2) In Egypt, President Nasser aimed to unite the Arab world under his leadership and dominate affairs in the region from 1956-1959 through various economic and infrastructure projects.
3) Hundreds of young Palestinians formed resistance groups in the 1960s, which later combined to form the Palestine Liberation Organization (PLO) to work for an independent Palestinian state.
4) Tensions rose further in the 1960s as the militant Palestinian group
Chapter+10+ +reading+comprehension+questions
The document summarizes the events leading up to and during the Six-Day War of 1967 between Israel and neighboring Arab nations. Rising tensions between Israel and Syria in 1966 and 1967 led to clashes between their armed forces. In May 1967, Egyptian president Nasser took increasingly hostile actions against Israel including blocking Israeli shipping in the Gulf of Aqaba. By late May, Jordan and Egypt had formed a mutual defense pact and placed their forces under joint command. On June 5th, Israel launched preemptive strikes against Egypt and Syria, decisively defeating the forces of Jordan, Syria and Egypt within six days. As a result, Israel gained control of the Sinai Peninsula, Gaza Strip, West Bank, and Golan Heights.
More from motorwan (6)
Gluing the starfish’s arms4
- 1. Gluing the starfish’s arms<br />-22860050165<br />The date: Mar.11.2011<br />What you did: Today, I have glued my product’s sides. It was hard job and I have to concentrate while gluing the sides. Because I have to glue them accurately and if I make a mistake, I have to glue it again.<br />Changes to your plan: I really don’t have to change my plan, because the job is going well, so I think I don’t have to change my plan.<br />-2943860191770Gluing the SidesEmotions: While gluing the sides, my head was hurt little bit. The reason why I think my head was hurt was because I have to concentrate while gluing the sides. If I don’t concentrate on it, I have to glue it again. <br />Finish gluingWhat’s next: After check and stick them all, I have to cut the top of my product. It will be a hard job to cut the top of my product. So I think I have to concentrate while cutting the top of my product.<br />Areas of Interaction and Learner: I think I was thinker while checking the plywood that I am going to use for my sides.<br />Why: The reason why I think I was thinker while checking the plywood that I am going to use for my product’s sides is because I have to concentrate and I need to check them accurately to fit them together if I am going to gluing them.<br />Tools: Glue, Plywood, G Clamp, and Desk Sander and Wet Cloth<br />